def SC70(profile, num_pins):
"""Construct a land pattern for an SC70 device.
Supports 5, 6 and 8-pin devices, with dimensions from JEDEC
MO-203.
"""
A = ipc.Dimension.from_nominal(1.25, 0.15)
B = ipc.Dimension.from_nominal(2, 0.15)
L = ipc.Dimension.from_nominal(2.1, 0.3)
T = ipc.Dimension(0.26, 0.46)
W = ipc.Dimension(0.15, 0.3)
if num_pins == 5:
# MO-203-C variant AA
return ipc.sot23_5(A, B, L, T, W, 0.65,
ipc.LandPatternSize.SOT(profile, A, L, T, 0.65))
elif num_pins == 6:
# MO-203-C variant AB
return ipc.in_line_pin_device(
A, B, L, B, T, W, 0.65, 3, 0,
ipc.LandPatternSize.SOT(profile, A, L, T, 0.65))
elif num_pins == 8:
# MO-203-C variant BA
W = ipc.Dimension(0.15, 0.27)
spec = ipc.LandPatternSize.SOT(profile, A, L, T, 0.5)
return ipc.in_line_pin_device(A, B, L, B, T, W, 0.5, 4, 0, spec)
else:
raise ValueError(
"No known standard dimensions for SOT23-{0}".format(num_pins))
def MELF(profile, polarized):
A = ipc.Dimension(4.7, 5.2)
B = ipc.Dimension(2.41, 2.67)
T = ipc.Dimension(0.46, 0.56)
return ipc.two_terminal_symmetric_device(
A=A, B=B, L=A, T=T, W=B,
spec=ipc.LandPatternSize.MELF(profile),
polarized=polarized)
def soic(profile):
"""PIC12F609 microcontroller"""
A = ipc.Dimension.from_nominal(3.9, 0.1)
B = ipc.Dimension.from_nominal(4.9, 0.1)
L = ipc.Dimension.from_nominal(6.0, 0.1)
T = ipc.Dimension(0.4, 1.27)
W = ipc.Dimension(0.31, 0.51)
return lib.SOIC(profile, A, B, L, T, W, 8)
def qfn(profile):
"""MAX3738 laser driver"""
A = ipc.Dimension(3.9, 4.1)
T = ipc.Dimension(0.3, 0.5)
W = ipc.Dimension(0.18, 0.30)
pitch = 0.5
return lib.QFN(profile, A, T, W, pitch, 24)
def tqfp(profile):
"""STM32F042K6T6 microcontroller"""
A = ipc.Dimension(6.8, 7.2)
L = ipc.Dimension(8.8, 9.2)
T = ipc.Dimension(0.450, 0.750)
W = ipc.Dimension(0.3, 0.45)
pitch = 0.8
return lib.QFP(profile, A, L, T, W, pitch, 32)
def ssop(profile):
"""Some MAX-something transceiver"""
A = ipc.Dimension(5.2, 5.38)
B = ipc.Dimension(6.07, 6.33)
L = ipc.Dimension(7.65, 7.90)
T = ipc.Dimension(0.63, 0.95)
W = ipc.Dimension(0.25, 0.38)
pitch = 0.65
return lib.SOP(profile, A, B, L, T, W, 16, pitch)
def SOD(profile, polarized):
A = ipc.Dimension(2.55, 2.85)
B = ipc.Dimension(1.4, 1.7)
L = ipc.Dimension(3.55, 3.85)
T = ipc.Dimension(0.25, 0.4)
W = ipc.Dimension.from_nominal(0.55, 0.1)
return ipc.two_terminal_symmetric_device(
A=A, B=B, L=L, T=T, W=W,
spec=ipc.LandPatternSize.SOD(
profile, A=A, L=L, T=T),
polarized=polarized)
def dfn(profile):
"""PIC12F609"""
A = ipc.Dimension.from_nominal(3, 0.1)
T = ipc.Dimension(0.2, 0.55)
W = ipc.Dimension(0.25, 0.35)
pitch = 0.65
return ipc.in_line_pin_device(
A=A, B=A, LA=A, LB=A, T=T, W=W, pitch=pitch,
pins_leftright=4, pins_updown=0,
spec=ipc.LandPatternSize.DFN(profile))
def pqfn(profile):
"""QFN with pulled back leads"""
A = ipc.Dimension(3.9, 4.1)
L = ipc.Dimension(3.4, 3.6)
T = ipc.Dimension(0.3, 0.5)
W = ipc.Dimension(0.18, 0.30)
pitch = 0.5
return ipc.in_line_pin_device(
A=A, B=A, LA=L, LB=L, T=T, W=W, pitch=pitch,
pins_leftright=5, pins_updown=5,
spec=ipc.LandPatternSize.QFN(profile))
def testFromNominal(self):
d1 = ipc.Dimension(1, 4)
d2 = ipc.Dimension.from_nominal(2, plus=2, minus=1)
self.assertEqual(d1.min, d2.min)
self.assertEqual(d1.max, d2.max)
self.assertEqual(d1.tolerance, d2.tolerance)
# Nominal is not recorded, so d2.nominal is not the same value
# we passed in.
self.assertEqual(d2.nominal, 2.5)
self.assertEqual(d1.nominal, d2.nominal)
def testSOP(self):
self._check_fp(
'TSSOP',
lib.SOP(ipc.Dimension(4.3, 4.5), ipc.Dimension(2.9, 3.1),
ipc.Dimension(6.25, 6.5), ipc.Dimension(0.5, 0.7),
ipc.Dimension(0.19, 0.3), 8, 0.65))
def testSOIC(self):
self._check_fp(
'SOIC',
lib.SOIC(ipc.Dimension(3.8, 4), ipc.Dimension(4.8, 5),
ipc.Dimension(5.8, 6.2), ipc.Dimension(0.4, 1.27),
ipc.Dimension(0.3, 0.5), 8))
def testConstruct(self):
d = ipc.Dimension(1, 2)
self.assertEqual(d.min, 1)
self.assertEqual(d.max, 2)
self.assertEqual(d.nominal, 1.5)
self.assertEqual(d.tolerance, 1)
def SOT23(profile, num_pins):
"""Construct a land pattern for a SOT23 device.
Supports 3, 5, 6 and 8-pin devices, with dimensions from JEDEC
TO-236 and MO-178.
"""
if num_pins == 3:
# Dimensions from JEDEC TO-236-A[AB]
A = ipc.Dimension(1.2, 1.4)
B = ipc.Dimension(2.8, 3.04)
L = ipc.Dimension(2.1, 2.64)
T = ipc.Dimension(0.4, 0.6)
W = ipc.Dimension(0.3, 0.5)
return ipc.sot23_3(A, B, L, T, W, 0.95,
ipc.LandPatternSize.SOT(profile, A, L, T, 0.95))
elif num_pins == 5:
# Dimensions from JEDEC MO-178-C variant AA
A = ipc.Dimension.from_nominal(1.6, 0.1)
B = ipc.Dimension.from_nominal(2.9, 0.1)
L = ipc.Dimension.from_nominal(2.8, 0.2)
T = ipc.Dimension(0.3, 0.6)
W = ipc.Dimension(0.3, 0.5)
return ipc.sot23_5(A, B, L, T, W, 0.95,
ipc.LandPatternSize.SOT(profile, A, L, T, 0.95))
elif num_pins == 6:
# Dimensions from JEDEC MO-178-C variant AB
A = ipc.Dimension.from_nominal(1.6, 0.1)
B = ipc.Dimension.from_nominal(2.9, 0.1)
L = ipc.Dimension.from_nominal(2.8, 0.2)
T = ipc.Dimension(0.3, 0.6)
W = ipc.Dimension(0.3, 0.5)
return ipc.in_line_pin_device(
A, B, L, B, T, W, 0.95, 3, 0,
ipc.LandPatternSize.SOT(profile, A, L, T, 0.95))
elif num_pins == 8:
# Dimensions from JEDEC MO-178-C variant BA
A = ipc.Dimension.from_nominal(1.6, 0.1)
B = ipc.Dimension.from_nominal(2.9, 0.1)
L = ipc.Dimension.from_nominal(2.8, 0.2)
T = ipc.Dimension(0.3, 0.6)
W = ipc.Dimension(0.22, 0.38)
# SOT23-8 is almost at the threshold where IPC switches to
# much smaller side fillets. This causes overlap violations
# with the Most profile. As such, we force the narrower pitch
# profile here by using a smaller pitch.
spec = ipc.LandPatternSize.SOT(profile, A, L, T, 0.6)
return ipc.in_line_pin_device(A, B, L, B, T, W, 0.65, 4, 0, spec)
else:
raise ValueError(
"No known standard dimensions for SOT23-{0}".format(num_pins))
def testQFP(self):
self._check_fp(
'QFP',
lib.QFP(ipc.Dimension(6.8, 7.2), ipc.Dimension(8.8, 9.2),
ipc.Dimension(0.45, 0.75), ipc.Dimension(0.3, 0.45), 0.8,
32))
def testQFN(self):
self._check_fp(
'QFN',
lib.QFN(ipc.Dimension(4.9, 5.1), ipc.Dimension(0.3, 0.5),
ipc.Dimension(0.18, 0.28), 0.5, 32))
ic.pin(numbers=6 + i,
name='PWM2_{0}'.format(i + 1),
type=sch.Pin.Bidirectional)
ic.pin(numbers=10, name='PWM14', type=sch.Pin.Bidirectional)
for i in range(4):
ic.pin(numbers=12 + i,
name='PWM3_{0}'.format(i + 1),
type=sch.Pin.Bidirectional)
for i in range(3):
ic.pin(numbers=18 + i,
name='PWM3_{0}'.format(i + 1),
type=sch.Pin.Bidirectional)
l.devices.append(
kidraw.Device(schematic=s,
footprints=[
flib.QFP(A=ipc.Dimension(6.8, 7.2),
L=ipc.Dimension(8.8, 9.2),
T=ipc.Dimension(0.45, 0.75),
W=ipc.Dimension(0.3, 0.45),
pitch=0.8,
num_pins=32),
]))
s = sch.Schematic(name='AP2120N', description='3.3V linear regulator')
with sch.ICBuilder(s, 3, slot_spacing=50) as ic:
ic.side(sch.Pin.Left)
ic.pin(3, name='Vin', type=sch.Pin.Power)
ic.side(sch.Pin.Down)
ic.pin(1, name='GND', type=sch.Pin.Power)
ic.side(sch.Pin.Right)
ic.pin(2, name='Vout', type=sch.Pin.Power)
