import time
led = pwmio.PWMOut(board.GP25,
frequency=60,
duty_cycle=1024,
variable_frequency=True)
import board
from kmk.kmk_keyboard import KMKKeyboard
from kmk.keys import KC
from kmk.matrix import DiodeOrientation
from kmk.modules.layers import Layers
from kmk.keys import KC, make_key
envkb = KMKKeyboard()
envkb.col_pins = (board.GP18, board.GP19, board.GP20, board.GP21)
envkb.row_pins = (board.GP4, board.GP11, board.GP15)
envkb.diode_orientation = DiodeOrientation.COLUMNS
rollover_cols_every_rows = 4
envkb.diode_orientation = DiodeOrientation.COLUMNS
envkb.debug_enabled = False
layers = Layers()
envkb.modules = [layers]
nokey = KC.NO
envkb.keymap = [
[
KC.F13,
KC.F14,
#PiPi-GHERKIN - Raspberry Pi PICO
import board
from kmk.keys import KC
from kmk.kmk_keyboard import KMKKeyboard
from kmk.matrix import DiodeOrientation
from kmk.hid import HIDModes
gherkin = KMKKeyboard()
gherkin.col_pins = (board.GP2, board.GP3, board.GP4, board.GP5, board.GP6,
board.GP7)
gherkin.row_pins = (board.GP8, board.GP9, board.GP10, board.GP11, board.GP12)
#Rotate gherkin so USB on Right Side. Not needed if USB on Left Side.
gherkin.col_pins = tuple(reversed(gherkin.col_pins))
gherkin.row_pins = tuple(reversed(gherkin.row_pins))
gherkin.diode_orientation = DiodeOrientation.COLUMNS
gherkin.debug_enabled = False
gherkin.keymap = [
[
KC.Q,
KC.W,
KC.E,
KC.R,
KC.T,
KC.Y,
KC.U,
KC.I,
import board
import digitalio
from kmk.keys import KC
from kmk.kmk_keyboard import KMKKeyboard
from kmk.matrix import DiodeOrientation
from kmk.extensions.media_keys import MediaKeys
from kmk.modules.rotaryEncoder import encoder
keyboard = KMKKeyboard()
keyboard.extensions.append(MediaKeys())
keyboard.col_pins = (board.GP15, board.GP13, board.GP12)
keyboard.row_pins = (board.GP8, board.GP9, board.GP10, board.GP11)
keyboard.diode_orientation = DiodeOrientation.COLUMNS
keyboard.debug_enabled = True
pins = [[board.GP0, board.GP1], [board.GP2, board.GP3]]
encMap = [[[KC.VOLU, KC.VOLD], [KC.K, KC.J]],
[[KC.MEDIA_NEXT_TRACK, KC.MEDIA_PREV_TRACK], [KC.X, KC.Z]]]
keyboard.modules.append(encoder(pins, encMap))
keyboard.keymap = [[
KC.AUDIO_MUTE, None, KC.MEDIA_PLAY_PAUSE, KC.F13, KC.F14, KC.C, KC.D, KC.E,
KC.F, KC.G, KC.H, KC.I
], [KC.Y, None, KC.Z, KC.L, KC.R, KC.S, KC.T, KC.U, KC.V, KC.W, KC.X, KC.J]]
# Onboard Pico LED enable
led = digitalio.DigitalInOut(board.GP25)
led.direction = digitalio.Direction.OUTPUT
led.value = True
if __name__ == "__main__":
i2c = busio.I2C(scl=board.SCL, sda=board.SDA, frequency=100000)
mcp = MCP23017(i2c, address=0x20)
keyboard = KMKKeyboard()
layer_ext = Layers
keyboard.modules = [layer_ext]
_______ = KC.TRNS
XXXXXXX = KC.NO
FN = KC.MO(1)
keyboard.debug_enabled = True
keyboard.col_pins = (mcp.get_pin(8), mcp.get_pin(9), mcp.get_pin(10),
mcp.get_pin(11), mcp.get_pin(12), mcp.get_pin(13),
mcp.get_pin(14), mcp.get_pin(15), mcp.get_pin(4),
mcp.get_pin(5), mcp.get_pin(6), mcp.get_pin(7),
mcp.get_pin(3), mcp.get_pin(2), mcp.get_pin(1))
keyboard.row_pins = (board.D7, board.D6, board.D5, board.D3, board.D2)
keyboard.diode_orientation = DiodeOrientation.COLUMNS
keyboard.keymap = [
# Qwerty
# ,--------------------------------------------------------------------------------------------------------.
# | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bksp | Del |
# |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
# | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | PgUp |
# |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
# | Esc | A | S | D | F | G | H | J | K | L | ; | ' | |Enter | PgDn |
# |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
# | Shift| Z | X | C | V | B | N | M | , | . | / |Shift | | Up | Ins |
#PiPi-GHERKIN - Raspberry Pi PICO
#Rpi pico keyboard keymap, I used the gherkin keymap as a example :)
print("Keyboard is starting")
import board
from kmk.keys import KC
from kmk.kmk_keyboard import KMKKeyboard
from kmk.modules.layers import Layers
from kmk.matrix import DiodeOrientation
from kmk.hid import HIDModes
envkb = KMKKeyboard()
keyboard = envkb
envkb.col_pins = (board.GP2, board.GP3, board.GP4, board.GP5, board.GP6, board.GP7, board.GP8, board.GP9, board.GP10, board.GP11, board.GP12, board.GP13, board.GP14, board.GP15, board.GP19, board.GP18, board.GP17, board.GP16)
envkb.row_pins = (board.GP20, board.GP21, board.GP22, board.GP26, board.GP27, board.GP28)
envkb.diode_orientation = DiodeOrientation.COLUMNS
envkb.debug_enabled = False
nokey = KC.NO
layers = Layers()
envkb.modules = [layers]
from kmk.extensions.RGB import RGB
from kmk.extensions.rgb import AnimationModes
#rgb_ext = RGB(pixel_pin=rgb_pixel_pin, num_pixels=27)
#
rgb_ext = RGB(pixel_pin=board.GP0,
num_pixels=88,
val_limit=100,
hue_default=0
sat_default=255,
rgb_order=(1, 0, 2), # GRB WS2812
import board
from kmk.consts import UnicodeMode
from kmk.handlers.sequences import compile_unicode_string_sequences, send_string
from kmk.keys import KC
from kmk.kmk_keyboard import KMKKeyboard
from kmk.matrix import DiodeOrientation
from kmk.types import AttrDict
keyboard = KMKKeyboard()
keyboard.col_pins = (board.A0, board.A1, board.A2, board.A3, board.A4, board.A5, board.SCK, board.MOSI, board.MISO, board.RX, board.TX, board.D4)
keyboard.row_pins = (board.D10, board.D11, board.D12, board.D13)
keyboard.diode_orientation = DiodeOrientation.COLUMNS
# ------------------User level config variables ---------------------------------------
keyboard.unicode_mode = UnicodeMode.LINUX
keyboard.tap_time = 350
keyboard.leader_timeout = 2000
keyboard.debug_enabled = False
emoticons = compile_unicode_string_sequences({
# Emoticons, but fancier
'ANGRY_TABLE_FLIP': r'(ノಠ痊ಠ)ノ彡┻━┻',
'CHEER': r'+｡:.ﾟヽ(´∀｡)ﾉﾟ.:｡+ﾟﾟ+｡:.ﾟヽ(*´∀)ﾉﾟ.:｡+ﾟ',
'TABLE_FLIP': r'(╯°□°）╯︵ ┻━┻',
'WAT': r'⊙.☉',
'FF': r'凸(ﾟДﾟ#)',
'F': r'（￣^￣）凸',
'MEH': r'╮(￣_￣)╭',
PC6: A2
PD4: A3
PD0: A4
PB6: D2
PB2: TX
PB3: RX
PB1: MI
PF7: MO
PF6: SCK
PF5: A5
Mosfet on B5 to control backlight
'''
keyboard.col_pins = (board.A4, board.A2, board.A3, board.A1, board.A0,
board.SDA)
keyboard.row_pins = (board.D2, board.TX, board.RX, board.MISO, board.MOSI)
# Kyle is f*****g stupid
keyboard.col_pins = tuple(reversed(keyboard.col_pins))
keyboard.row_pins = tuple(reversed(keyboard.row_pins))
keyboard.diode_orientation = DiodeOrientation.COLUMNS
# ------------------User level config variables ---------------------------------------
keyboard.unicode_mode = UnicodeMode.LINUX
keyboard.tap_time = 350
keyboard.leader_timeout = 2000
keyboard.debug_enabled = False
emoticons = compile_unicode_string_sequences({
import board
from kmk.keys import KC
from kmk.kmk_keyboard import KMKKeyboard
from kmk.matrix import DiodeOrientation
from kmk.handlers.sequences import send_string
import digitalio
redox_l = KMKKeyboard()
#redox_l.debug_enabled = True
redox_l.col_pins = (board.GP2, board.GP3, board.GP4, board.GP5, board.GP6, board.GP7, board.GP8)
redox_l.row_pins = (board.GP16, board.GP17, board.GP18, board.GP19, board.GP20)
redox_l.diode_orientation = DiodeOrientation.COLUMNS
redox_l.split_type = "UART"
redox_l.uart_pin = (board.GP0, board.GP1) # Must include this to get pico uart to work. kmk_keyboard.py lines 172, 174 changed from ...x=pin, to x=pin[0 or 1]
redox_l.split_flip = True
redox_l.split_offsets = [7, 7, 7, 7, 7]
qt_strg = send_string("quit()")
redox_l.keymap = [
# Qwerty
# ,------------------------------------------------. ,------------------------------------------------.
# | esc | 1 | 2 | 3 | 4 | 5 |delete| |delete| 6 | 7 | 8 | 9 | 0 | fn |
# |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
# | tab | Q | W | E | R | T | esc | | rclck| Y | U | I | O | P |bckspc|
# |------+------+------+------+------+-------------| |------+------+------+------+------+-------------|
# | ctrl | A | S | D | F | G | {[ | | -_ | H | J | K | L | : | \| |
# |------+------+------+------+------+------|------| |------+------+------+------+------+------|------|
# | Shift| Z | X | C | V | B | }] | | += | N | M | ,< | .> | ?/ |Shift |