def __init__(self, collector_area, numPix, deltaPix, readout_noise,
sky_brightness, extinction, exposure_time, psf_type, fwhm,
*args, **kwargs):
"""
:param collector_area: area of collector in m^2
:param numPix: number of pixels
:param deltaPix: FoV per pixel in units of arcsec
:param readout_noise: rms value of readout per pixel in units of photons
:param sky_brightness: number of photons of sky per area (arcsec) per time (second) for a collector area (1 m^2)
:param extinction: exctinction (galactic and atmosphere combined).
Only use this if magnitude calibration is done without it.
:param exposure_time: exposure time (seconds)
:param psf_type:
:param fwhm:
:param args:
:param kwargs:
"""
self.simulation = Simulation()
sky_per_pixel = sky_brightness * collector_area * deltaPix**2 # time independent noise term per pixel per second
sigma_bkg = np.sqrt(
readout_noise**2 + exposure_time * sky_per_pixel**2
) / exposure_time # total Gaussian noise term per pixel in full exposure (in units of counts per second)
kwargs_data = self.simulation.data_configure(numPix, deltaPix,
exposure_time, sigma_bkg)
self._data = Data(kwargs_data)
kwargs_psf = self.simulation.psf_configure(psf_type, fwhm)
self._psf = PSF(kwargs_psf)
self._flux_calibration_factor = collector_area / extinction * deltaPix**2 # transforms intrinsic surface brightness per angular area into the flux normalizations per pixel
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = .05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
kwargs_data = self.SimAPI.data_configure(numPix, deltaPix, exp_time, sigma_bkg)
data_class = Data(kwargs_data)
kwargs_psf = self.SimAPI.psf_configure(psf_type='GAUSSIAN', fwhm=fwhm, kernelsize=31, deltaPix=deltaPix, truncate=3,
kernel=None)
psf_class = PSF(kwargs_psf)
psf_class._psf_error_map = np.zeros_like(psf_class.kernel_point_source)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {'e1': 0.01, 'e2': 0.01} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
phi, q = 0.2, 0.8
e1, e2 = param_util.phi_q2_ellipticity(phi, q)
kwargs_spemd = {'theta_E': 1., 'gamma': 1.8, 'center_x': 0, 'center_y': 0, 'e1': e1, 'e2': e2}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {'amp': 1., 'R_sersic': 0.1, 'n_sersic': 2, 'center_x': 0, 'center_y': 0}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
phi, q = 0.2, 0.9
e1, e2 = param_util.phi_q2_ellipticity(phi, q)
kwargs_sersic_ellipse = {'amp': 1., 'R_sersic': .6, 'n_sersic': 7, 'center_x': 0, 'center_y': 0,
'e1': e1, 'e2': e2}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [{'ra_source': 0.01, 'dec_source': 0.0,
'source_amp': 1.}] # quasar point source position in the source plane and intrinsic brightness
point_source_class = PointSource(point_source_type_list=['SOURCE_POSITION'], fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 2, 'psf_subgrid': True}
imageModel = ImageModel(data_class, psf_class, lens_model_class, source_model_class, lens_light_model_class, point_source_class, kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens, self.kwargs_source,
self.kwargs_lens_light, self.kwargs_ps)
data_class.update_data(image_sim)
self.imageModel = ImageModel(data_class, psf_class, lens_model_class, source_model_class, lens_light_model_class, point_source_class, kwargs_numerics=kwargs_numerics)
self.solver = LensEquationSolver(lensModel=self.imageModel.LensModel)
def lens_model_plot(ax, lensModel, kwargs_lens, numPix=500, deltaPix=0.01, sourcePos_x=0, sourcePos_y=0, point_source=False, with_caustics=False):
"""
plots a lens model (convergence) and the critical curves and caustics
:param ax:
:param kwargs_lens:
:param numPix:
:param deltaPix:
:return:
"""
from lenstronomy.SimulationAPI.simulations import Simulation
simAPI = Simulation()
kwargs_data = simAPI.data_configure(numPix, deltaPix)
data = Data(kwargs_data)
_frame_size = numPix * deltaPix
_coords = data._coords
x_grid, y_grid = data.coordinates
lensModelExt = LensModelExtensions(lensModel)
#ra_crit_list, dec_crit_list, ra_caustic_list, dec_caustic_list = lensModelExt.critical_curve_caustics(
# kwargs_lens, compute_window=_frame_size, grid_scale=deltaPix/2.)
x_grid1d = util.image2array(x_grid)
y_grid1d = util.image2array(y_grid)
kappa_result = lensModel.kappa(x_grid1d, y_grid1d, kwargs_lens)
kappa_result = util.array2image(kappa_result)
im = ax.matshow(np.log10(kappa_result), origin='lower',
extent=[0, _frame_size, 0, _frame_size], cmap='Greys', vmin=-1, vmax=1) #, cmap=self._cmap, vmin=v_min, vmax=v_max)
if with_caustics is True:
ra_crit_list, dec_crit_list = lensModelExt.critical_curve_tiling(kwargs_lens, compute_window=_frame_size,
start_scale=deltaPix, max_order=10)
ra_caustic_list, dec_caustic_list = lensModel.ray_shooting(ra_crit_list, dec_crit_list, kwargs_lens)
plot_line_set(ax, _coords, ra_caustic_list, dec_caustic_list, color='g')
plot_line_set(ax, _coords, ra_crit_list, dec_crit_list, color='r')
if point_source:
from lenstronomy.LensModel.Solver.lens_equation_solver import LensEquationSolver
solver = LensEquationSolver(lensModel)
theta_x, theta_y = solver.image_position_from_source(sourcePos_x, sourcePos_y, kwargs_lens)
mag_images = lensModel.magnification(theta_x, theta_y, kwargs_lens)
x_image, y_image = _coords.map_coord2pix(theta_x, theta_y)
abc_list = ['A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K']
for i in range(len(x_image)):
x_ = (x_image[i] + 0.5) * deltaPix
y_ = (y_image[i] + 0.5) * deltaPix
ax.plot(x_, y_, 'dk', markersize=4*(1 + np.log(np.abs(mag_images[i]))), alpha=0.5)
ax.text(x_, y_, abc_list[i], fontsize=20, color='k')
x_source, y_source = _coords.map_coord2pix(sourcePos_x, sourcePos_y)
ax.plot((x_source + 0.5) * deltaPix, (y_source + 0.5) * deltaPix, '*k', markersize=10)
ax.get_xaxis().set_visible(False)
ax.get_yaxis().set_visible(False)
ax.autoscale(False)
#image_position_plot(ax, _coords, self._kwargs_else)
#source_position_plot(ax, self._coords, self._kwargs_source)
return ax
def test_point_source_rendering(self):
# initialize data
from lenstronomy.SimulationAPI.simulations import Simulation
SimAPI = Simulation()
numPix = 100
deltaPix = 0.05
kwargs_data = SimAPI.data_configure(numPix, deltaPix, exposure_time=1, sigma_bkg=1)
data_class = Data(kwargs_data)
kernel = np.zeros((5, 5))
kernel[2, 2] = 1
kwargs_psf = {'kernel_point_source': kernel, 'kernel_pixel': kernel, 'psf_type': 'PIXEL'}
psf_class = PSF(kwargs_psf)
lens_model_class = LensModel(['SPEP'])
source_model_class = LightModel([])
lens_light_model_class = LightModel([])
kwargs_numerics = {'subgrid_res': 2, 'point_source_subgrid': 1}
point_source_class = PointSource(point_source_type_list=['LENSED_POSITION'], fixed_magnification_list=[False])
makeImage = ImageModel(data_class, psf_class, lens_model_class, source_model_class, lens_light_model_class, point_source_class, kwargs_numerics=kwargs_numerics)
# chose point source positions
x_pix = np.array([10, 5, 10, 90])
y_pix = np.array([40, 50, 60, 50])
ra_pos, dec_pos = makeImage.Data.map_pix2coord(x_pix, y_pix)
e1, e2 = param_util.phi_q2_ellipticity(0, 0.8)
kwargs_lens_init = [{'theta_E': 1, 'gamma': 2, 'e1': e1, 'e2': e2, 'center_x': 0, 'center_y': 0}]
kwargs_else = [{'ra_image': ra_pos, 'dec_image': dec_pos, 'point_amp': np.ones_like(ra_pos)}]
model = makeImage.image(kwargs_lens_init, kwargs_source={}, kwargs_lens_light={}, kwargs_ps=kwargs_else)
image = makeImage.ImageNumerics.array2image(model)
for i in range(len(x_pix)):
npt.assert_almost_equal(image[y_pix[i], x_pix[i]], 1, decimal=2)
x_pix = np.array([10.5, 5.5, 10.5, 90.5])
y_pix = np.array([40, 50, 60, 50])
ra_pos, dec_pos = makeImage.Data.map_pix2coord(x_pix, y_pix)
phi, q = 0., 0.8
e1, e2 = param_util.phi_q2_ellipticity(phi, q)
kwargs_lens_init = [{'theta_E': 1, 'gamma': 2, 'e1': e1, 'e2': e2, 'center_x': 0, 'center_y': 0}]
kwargs_else = [{'ra_image': ra_pos, 'dec_image': dec_pos, 'point_amp': np.ones_like(ra_pos)}]
model = makeImage.image(kwargs_lens_init, kwargs_source={}, kwargs_lens_light={}, kwargs_ps=kwargs_else)
image = makeImage.ImageNumerics.array2image(model)
for i in range(len(x_pix)):
print(int(y_pix[i]), int(x_pix[i]+0.5))
npt.assert_almost_equal(image[int(y_pix[i]), int(x_pix[i])], 0.5, decimal=1)
npt.assert_almost_equal(image[int(y_pix[i]), int(x_pix[i]+0.5)], 0.5, decimal=1)
#general imports import numpy as np import matplotlib.pyplot as plt import random as rand from astropy import visualization as aviz import scipy import os #lenstronomy imports from lenstronomy.Data.imaging_data import Data from lenstronomy.Data.psf import PSF from lenstronomy.SimulationAPI.simulations import Simulation SimAPI = Simulation() from lenstronomy.LightModel.light_model import LightModel from lenstronomy.LensModel.lens_model import LensModel import lenstronomy.Plots.output_plots as lens_plot from lenstronomy.LensModel.Solver.lens_equation_solver import LensEquationSolver import lenstronomy.Util.param_util as param_util from lenstronomy.PointSource.point_source import PointSource from lenstronomy.ImSim.image_model import ImageModel import lenstronomy.Util.image_util as image_util from lenstronomy.Plots.output_plots import LensModelPlot from lenstronomy.Workflow.fitting_sequence import FittingSequence import lenstronomy.Plots.output_plots as out_plot import lenstronomy.Util.util as util from lenstronomy.LightModel.Profiles.shapelets import ShapeletSet shapeletSet = ShapeletSet() #********************************************************************************# # DES CATALOGUE # #********************************************************************************#
class SingleBand(object):
"""
class to operate on single exposure
"""
def __init__(self, collector_area, numPix, deltaPix, readout_noise,
sky_brightness, extinction, exposure_time, psf_type, fwhm,
*args, **kwargs):
"""
:param collector_area: area of collector in m^2
:param numPix: number of pixels
:param deltaPix: FoV per pixel in units of arcsec
:param readout_noise: rms value of readout per pixel in units of photons
:param sky_brightness: number of photons of sky per area (arcsec) per time (second) for a collector area (1 m^2)
:param extinction: exctinction (galactic and atmosphere combined).
Only use this if magnitude calibration is done without it.
:param exposure_time: exposure time (seconds)
:param psf_type:
:param fwhm:
:param args:
:param kwargs:
"""
self.simulation = Simulation()
sky_per_pixel = sky_brightness * collector_area * deltaPix**2 # time independent noise term per pixel per second
sigma_bkg = np.sqrt(
readout_noise**2 + exposure_time * sky_per_pixel**2
) / exposure_time # total Gaussian noise term per pixel in full exposure (in units of counts per second)
kwargs_data = self.simulation.data_configure(numPix, deltaPix,
exposure_time, sigma_bkg)
self._data = Data(kwargs_data)
kwargs_psf = self.simulation.psf_configure(psf_type, fwhm)
self._psf = PSF(kwargs_psf)
self._flux_calibration_factor = collector_area / extinction * deltaPix**2 # transforms intrinsic surface brightness per angular area into the flux normalizations per pixel
def simulate(self,
kwargs_options,
kwargs_lens,
kwargs_source,
kwargs_lens_light,
kwargs_else,
lens_colour,
source_colour,
quasar_colour,
no_noise=False,
source_add=True,
lens_light_add=True,
point_source_add=True):
"""
:param kwargs_options:
:param kwargs_lens:
:param kwargs_source:
:param kwargs_lens_light:
:param kwargs_else:
:param no_noise:
:return:
"""
lensLightModel = LightModel(
kwargs_options.get('lens_light_model_list', []))
sourceModel = LightModel(
kwargs_options.get('source_light_model_list', []))
lensModel = LensModel(
lens_model_list=kwargs_options.get('lens_model_list', []))
pointSource = PointSource(
point_source_type_list=kwargs_options.get('point_source_list', []),
lensModel=lensModel,
fixed_magnification_list=kwargs_options.get(
'fixed_magnification_list', None),
additional_images_list=kwargs_options.get('additional_images',
None))
norm_factor_source = self._flux_calibration_factor * source_colour
norm_factor_lens_light = self._flux_calibration_factor * lens_colour
norm_factor_point_source = self._flux_calibration_factor * quasar_colour
kwargs_source_updated, kwargs_lens_light_updated, kwargs_else_updated = self.simulation.normalize_flux(
kwargs_options, kwargs_source, kwargs_lens_light, kwargs_else,
norm_factor_source, norm_factor_lens_light,
norm_factor_point_source)
imageModel = ImageModel(self._data,
self._psf,
lensModel,
sourceModel,
lensLightModel,
pointSource,
kwargs_numerics={})
image = self.simulation.simulate(imageModel,
kwargs_lens,
kwargs_source_updated,
kwargs_lens_light_updated,
kwargs_else_updated,
no_noise=no_noise,
source_add=source_add,
lens_light_add=lens_light_add,
point_source_add=point_source_add)
return image
def source_plane(self,
kwargs_options,
kwargs_source,
source_colour,
numPix=100,
deltaPix=0.01):
"""
:param kwargs_options:
:param kwargs_source:
:param kwargs_else:
:param source_colour:
:param numPix:
:param deltaPix:
:return:
"""
norm_factor_source = self._flux_calibration_factor * source_colour
kwargs_source_updated = self.simulation.normalize_flux_source(
kwargs_options, kwargs_source, norm_factor_source)
image = self.simulation.source_plane(kwargs_options,
kwargs_source_updated, numPix,
deltaPix)
return image
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 0.05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
data_class = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
psf_class = self.SimAPI.psf_configure(psf_type='GAUSSIAN',
fwhm=fwhm,
kernelsize=31,
deltaPix=deltaPix,
truncate=3,
kernel=None)
psf_class = self.SimAPI.psf_configure(
psf_type='PIXEL',
fwhm=fwhm,
kernelsize=31,
deltaPix=deltaPix,
truncate=6,
kernel=psf_class.kernel_point_source)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'I0_sersic': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
point_source_list = ['SOURCE_POSITION']
point_source_class = PointSource(
point_source_type_list=point_source_list,
fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps)
data_class.update_data(image_sim)
self.kwargs_data = data_class.constructor_kwargs()
self.kwargs_psf = psf_class.constructor_kwargs()
self.kwargs_model = {
'lens_model_list': lens_model_list,
'source_light_model_list': source_model_list,
'lens_light_model_list': lens_light_model_list,
'point_source_model_list': point_source_list,
'fixed_magnification_list': [False],
}
self.kwargs_numerics = {'subgrid_res': 2, 'psf_subgrid': True}
num_source_model = len(source_model_list)
self.kwargs_constraints = {
'joint_center_lens_light': False,
'joint_center_source_light': False,
'num_point_source_list': [4],
'additional_images_list': [False],
'fix_to_point_source_list': [False] * num_source_model,
'image_plane_source_list': [False] * num_source_model,
'solver': False,
'solver_type':
'PROFILE_SHEAR', # 'PROFILE', 'PROFILE_SHEAR', 'ELLIPSE', 'CENTER'
}
self.kwargs_likelihood = {
'check_bounds': True,
'force_no_add_image': True,
'source_marg': True,
'point_source_likelihood': False,
'position_uncertainty': 0.004,
'check_solver': True,
'solver_tolerance': 0.001
}
kwargs_fixed = [[{}, {}], [{}], [{}], [{}]]
image_band = [self.kwargs_data, self.kwargs_psf, self.kwargs_numerics]
multi_band_list = [image_band]
kwargs_init = [
self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light,
self.kwargs_ps
]
self.likelihoodModule = LikelihoodModule(
multi_band_list,
self.kwargs_model,
self.kwargs_constraints,
self.kwargs_likelihood,
kwargs_fixed,
kwargs_lower=kwargs_init,
kwargs_upper=kwargs_init,
kwargs_lens_init=self.kwargs_lens,
compute_bool=None)
kwargs_fixed_lens, kwargs_fixed_source, kwargs_fixed_lens_light, kwargs_fixed_ps = kwargs_fixed
self.param = Param(self.kwargs_model,
self.kwargs_constraints,
kwargs_fixed_lens,
kwargs_fixed_source,
kwargs_fixed_lens_light,
kwargs_fixed_ps,
kwargs_lens_init=self.kwargs_lens)
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 0.05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 10 # cutout pixel size
deltaPix = 0.1 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
kwargs_data = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
data_class = Data(kwargs_data)
kwargs_psf = self.SimAPI.psf_configure(psf_type='GAUSSIAN',
fwhm=fwhm,
kernelsize=11,
deltaPix=deltaPix,
truncate=3,
kernel=None)
kwargs_psf = self.SimAPI.psf_configure(
psf_type='PIXEL',
fwhm=fwhm,
kernelsize=11,
deltaPix=deltaPix,
truncate=6,
kernel=kwargs_psf['kernel_point_source'])
psf_class = PSF(kwargs_psf)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'e1': 0.1,
'e2': 0.1
}
lens_model_list = ['SPEP']
self.kwargs_lens = [kwargs_spemd]
lens_model_class = LensModel(lens_model_list=lens_model_list)
kwargs_sersic = {
'amp': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'amp': 1.,
'R_sersic': .6,
'n_sersic': 3,
'center_x': 0,
'center_y': 0,
'e1': 0.1,
'e2': 0.1
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light)
data_class.update_data(image_sim)
self.data_class = data_class
self.psf_class = psf_class
kwargs_model = {
'lens_model_list': lens_model_list,
'source_light_model_list': source_model_list,
'lens_light_model_list': lens_light_model_list,
'fixed_magnification_list': [False],
}
self.kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
num_source_model = len(source_model_list)
kwargs_constraints = {
'joint_center_lens_light': False,
'joint_center_source_light': False,
'additional_images_list': [False],
'fix_to_point_source_list': [False] * num_source_model,
'image_plane_source_list': [False] * num_source_model,
'solver': False,
}
kwargs_likelihood = {
'source_marg': True,
'point_source_likelihood': False,
'position_uncertainty': 0.004,
'check_solver': False,
'solver_tolerance': 0.001,
}
self.param_class = Param(kwargs_model, kwargs_constraints)
self.Likelihood = LikelihoodModule(imSim_class=imageModel,
param_class=self.param_class,
kwargs_likelihood=kwargs_likelihood)
self.sampler = Sampler(likelihoodModule=self.Likelihood)
class TestFittingSequence(object):
"""
test the fitting sequences
"""
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 0.05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 10 # cutout pixel size
deltaPix = 0.1 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
kwargs_data = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
data_class = Data(kwargs_data)
kwargs_psf = self.SimAPI.psf_configure(psf_type='GAUSSIAN',
fwhm=fwhm,
kernelsize=11,
deltaPix=deltaPix,
truncate=3,
kernel=None)
kwargs_psf = self.SimAPI.psf_configure(
psf_type='PIXEL',
fwhm=fwhm,
kernelsize=11,
deltaPix=deltaPix,
truncate=6,
kernel=kwargs_psf['kernel_point_source'])
psf_class = PSF(kwargs_psf)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'e1': 0.1,
'e2': 0.1
}
lens_model_list = ['SPEP']
self.kwargs_lens = [kwargs_spemd]
lens_model_class = LensModel(lens_model_list=lens_model_list)
kwargs_sersic = {
'amp': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'amp': 1.,
'R_sersic': .6,
'n_sersic': 3,
'center_x': 0,
'center_y': 0,
'e1': 0.1,
'e2': 0.1
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light)
data_class.update_data(image_sim)
self.data_class = data_class
self.psf_class = psf_class
kwargs_model = {
'lens_model_list': lens_model_list,
'source_light_model_list': source_model_list,
'lens_light_model_list': lens_light_model_list,
'fixed_magnification_list': [False],
}
self.kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
num_source_model = len(source_model_list)
kwargs_constraints = {
'joint_center_lens_light': False,
'joint_center_source_light': False,
'additional_images_list': [False],
'fix_to_point_source_list': [False] * num_source_model,
'image_plane_source_list': [False] * num_source_model,
'solver': False,
}
kwargs_likelihood = {
'source_marg': True,
'point_source_likelihood': False,
'position_uncertainty': 0.004,
'check_solver': False,
'solver_tolerance': 0.001,
}
self.param_class = Param(kwargs_model, kwargs_constraints)
self.Likelihood = LikelihoodModule(imSim_class=imageModel,
param_class=self.param_class,
kwargs_likelihood=kwargs_likelihood)
self.sampler = Sampler(likelihoodModule=self.Likelihood)
def test_pso(self):
n_particles = 2
n_iterations = 2
result, chain = self.sampler.pso(n_particles,
n_iterations,
lower_start=None,
upper_start=None,
threadCount=1,
init_pos=None,
mpi=False,
print_key='PSO')
assert len(result) == 16
def test_mcmc_emcee(self):
n_walkers = 36
n_run = 2
n_burn = 2
mean_start = self.param_class.setParams(
kwargs_lens=self.kwargs_lens,
kwargs_source=self.kwargs_source,
kwargs_lens_light=self.kwargs_lens_light)
sigma_start = np.ones_like(mean_start) * 0.1
samples = self.sampler.mcmc_emcee(n_walkers,
n_run,
n_burn,
mean_start,
sigma_start,
mpi=False)
assert len(samples) == n_walkers * n_run
def test_mcmc_CH(self):
walkerRatio = 2
n_run = 2
n_burn = 2
mean_start = self.param_class.setParams(
kwargs_lens=self.kwargs_lens,
kwargs_source=self.kwargs_source,
kwargs_lens_light=self.kwargs_lens_light)
sigma_start = np.ones_like(mean_start) * 0.1
self.sampler.mcmc_CH(walkerRatio,
n_run,
n_burn,
mean_start,
sigma_start,
threadCount=1,
init_pos=None,
mpi=False)
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 0.01 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
data_class = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
sigma = util.fwhm2sigma(fwhm)
x_grid, y_grid = util.make_grid(numPix=31, deltapix=0.05)
from lenstronomy.LightModel.Profiles.gaussian import Gaussian
gaussian = Gaussian()
kernel_point_source = gaussian.function(x_grid,
y_grid,
amp=1.,
sigma_x=sigma,
sigma_y=sigma,
center_x=0,
center_y=0)
kernel_point_source /= np.sum(kernel_point_source)
kernel_point_source = util.array2image(kernel_point_source)
self.kwargs_psf = {
'psf_type': 'PIXEL',
'kernel_point_source': kernel_point_source
}
psf_class = PSF(kwargs_psf=self.kwargs_psf)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'I0_sersic': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
point_source_class = PointSource(
point_source_type_list=['SOURCE_POSITION'],
fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 3, 'psf_subgrid': True}
imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps)
data_class.update_data(image_sim)
self.imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
self.psf_fitting = PsfFitting(self.imageModel)
class TestImageModel(object):
"""
tests the source model routines
"""
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 0.01 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
data_class = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
sigma = util.fwhm2sigma(fwhm)
x_grid, y_grid = util.make_grid(numPix=31, deltapix=0.05)
from lenstronomy.LightModel.Profiles.gaussian import Gaussian
gaussian = Gaussian()
kernel_point_source = gaussian.function(x_grid,
y_grid,
amp=1.,
sigma_x=sigma,
sigma_y=sigma,
center_x=0,
center_y=0)
kernel_point_source /= np.sum(kernel_point_source)
kernel_point_source = util.array2image(kernel_point_source)
self.kwargs_psf = {
'psf_type': 'PIXEL',
'kernel_point_source': kernel_point_source
}
psf_class = PSF(kwargs_psf=self.kwargs_psf)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'I0_sersic': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
point_source_class = PointSource(
point_source_type_list=['SOURCE_POSITION'],
fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 3, 'psf_subgrid': True}
imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps)
data_class.update_data(image_sim)
self.imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
self.psf_fitting = PsfFitting(self.imageModel)
def test_update_psf(self):
fwhm = 0.3
sigma = util.fwhm2sigma(fwhm)
x_grid, y_grid = util.make_grid(numPix=31, deltapix=0.05)
from lenstronomy.LightModel.Profiles.gaussian import Gaussian
gaussian = Gaussian()
kernel_point_source = gaussian.function(x_grid,
y_grid,
amp=1.,
sigma_x=sigma,
sigma_y=sigma,
center_x=0,
center_y=0)
kernel_point_source /= np.sum(kernel_point_source)
kernel_point_source = util.array2image(kernel_point_source)
kwargs_psf = {
'psf_type': 'PIXEL',
'kernel_point_source': kernel_point_source
}
kwargs_psf_return, improved_bool = self.psf_fitting.update_psf(
kwargs_psf,
self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps,
factor=0.1,
symmetry=1)
assert improved_bool
kernel_new = kwargs_psf_return['kernel_point_source']
kernel_true = self.kwargs_psf['kernel_point_source']
kernel_old = kwargs_psf['kernel_point_source']
diff_old = np.sum((kernel_old - kernel_true)**2)
diff_new = np.sum((kernel_new - kernel_true)**2)
assert diff_old > diff_new
def test_update_iterative(self):
fwhm = 0.3
sigma = util.fwhm2sigma(fwhm)
x_grid, y_grid = util.make_grid(numPix=31, deltapix=0.05)
from lenstronomy.LightModel.Profiles.gaussian import Gaussian
gaussian = Gaussian()
kernel_point_source = gaussian.function(x_grid,
y_grid,
amp=1.,
sigma_x=sigma,
sigma_y=sigma,
center_x=0,
center_y=0)
kernel_point_source /= np.sum(kernel_point_source)
kernel_point_source = util.array2image(kernel_point_source)
kwargs_psf = {
'psf_type': 'PIXEL',
'kernel_point_source': kernel_point_source
}
kwargs_psf_new = self.psf_fitting.update_iterative(
kwargs_psf,
self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps,
factor=0.2,
num_iter=3,
symmetry=1)
kernel_new = kwargs_psf_new['kernel_point_source']
kernel_true = self.kwargs_psf['kernel_point_source']
kernel_old = kwargs_psf['kernel_point_source']
diff_old = np.sum((kernel_old - kernel_true)**2)
diff_new = np.sum((kernel_new - kernel_true)**2)
assert diff_old > diff_new
assert diff_new < 0.01
kwargs_psf_new = self.psf_fitting.update_iterative(
kwargs_psf,
self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps,
factor=0.2,
num_iter=3,
symmetry=1,
no_break=True)
kernel_new = kwargs_psf_new['kernel_point_source']
kernel_true = self.kwargs_psf['kernel_point_source']
kernel_old = kwargs_psf['kernel_point_source']
diff_old = np.sum((kernel_old - kernel_true)**2)
diff_new = np.sum((kernel_new - kernel_true)**2)
assert diff_old > diff_new
assert diff_new < 0.01
def test_mask_point_sources(self):
ra_image, dec_image, amp = self.imageModel.PointSource.point_source_list(
self.kwargs_ps, self.kwargs_lens)
print(ra_image, dec_image, amp)
x_grid, y_grid = self.imageModel.Data.coordinates
radius = 0.5
mask_point_source_list = self.psf_fitting.mask_point_sources(
ra_image, dec_image, x_grid, y_grid, radius)
assert mask_point_source_list[0][10, 10] == 1
class TestSimulation(object):
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 1. # background noise per pixel
exp_time = 10 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
data_class = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
self.kwargs_data = data_class.constructor_kwargs()
psf_class = self.SimAPI.psf_configure(psf_type='GAUSSIAN',
fwhm=fwhm,
kernelsize=31,
deltaPix=deltaPix,
truncate=5)
self.kwargs_psf = psf_class.constructor_kwargs()
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'I0_sersic': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
point_source_class = PointSource(
point_source_type_list=['SOURCE_POSITION'],
fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 2, 'psf_subgrid': True}
self.imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
def test_im_sim(self):
# model specifics
# list of lens models, supports:
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
kwargs_lens_list = [kwargs_spemd, kwargs_shear]
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'I0_sersic': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
kwargs_lens_light_list = [kwargs_sersic]
kwargs_source_list = [kwargs_sersic_ellipse]
kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
image_sim = self.SimAPI.simulate(self.imageModel, kwargs_lens_list,
kwargs_source_list,
kwargs_lens_light_list, kwargs_ps)
assert len(image_sim) == 100
npt.assert_almost_equal(np.sum(image_sim),
24476.280571230454,
decimal=-3)
def test_normalize_flux(self):
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
kwargs_lens_list = [kwargs_spemd, kwargs_shear]
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'I0_sersic': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
lens_light_model_list = ['SERSIC']
kwargs_lens_light_list = [kwargs_sersic]
source_model_list = ['SERSIC_ELLIPSE']
kwargs_source_list = [kwargs_sersic_ellipse]
kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
kwargs_options = {
'lens_model_list': lens_model_list,
'lens_light_model_list': lens_light_model_list,
'source_light_model_list': source_model_list,
'psf_type': 'PIXEL',
'point_source_list': ['SOURCE_POSITION'],
'fixed_magnification': True
# if True, simulates point source at source position of 'sourcePos_xy' in kwargs_ps
}
#image_sim = self.SimAPI.simulate(self.imageModel, kwargs_lens_list, kwargs_source_list,
# kwargs_lens_light_list, kwargs_ps)
kwargs_source_updated, kwargs_lens_light_updated, kwargs_else_updated = self.SimAPI.normalize_flux(
kwargs_options,
kwargs_source_list,
kwargs_lens_light_list,
kwargs_ps,
norm_factor_source=3,
norm_factor_lens_light=2,
norm_factor_point_source=0.)
print(kwargs_else_updated, 'test')
assert kwargs_else_updated[0]['source_amp'] == 0
def test_normalize_flux_source(self):
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
kwargs_lens_list = [kwargs_spemd, kwargs_shear]
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'I0_sersic': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
lens_light_model_list = ['SERSIC']
kwargs_lens_light_list = [kwargs_sersic]
source_model_list = ['SERSIC_ELLIPSE']
kwargs_source_list = [kwargs_sersic_ellipse]
kwargs_options = {
'lens_model_list': lens_model_list,
'lens_light_model_list': lens_light_model_list,
'source_light_model_list': source_model_list,
'psf_type': 'PIXEL',
'point_source': True
# if True, simulates point source at source position of 'sourcePos_xy' in kwargs_else
}
kwargs_source_updated = self.SimAPI.normalize_flux_source(
kwargs_options, kwargs_source_list, norm_factor_source=10)
assert kwargs_source_updated[0][
'I0_sersic'] == kwargs_source_list[0]['I0_sersic'] * 10
def test_source_plane(self):
numPix = 10
deltaPix = 0.1
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
lens_light_model_list = ['SERSIC']
source_model_list = ['SERSIC_ELLIPSE']
kwargs_source = [kwargs_sersic_ellipse]
kwargs_options = {
'lens_light_model_list': lens_light_model_list,
'source_light_model_list': source_model_list,
'psf_type': 'pixel',
'point_source': True
# if True, simulates point source at source position of 'sourcePos_xy' in kwargs_else
}
source = self.SimAPI.source_plane(kwargs_options, kwargs_source,
numPix, deltaPix)
assert len(source) == numPix
def test_shift_coordinate_grid(self):
x_shift = 0.05
y_shift = 0
kwargs_data_shifted = self.SimAPI.shift_coordinate_grid(
self.kwargs_data, x_shift, y_shift, pixel_units=False)
kwargs_data_new = copy.deepcopy(self.kwargs_data)
kwargs_data_new['ra_shift'] = x_shift
kwargs_data_new['dec_shift'] = y_shift
data = Data(kwargs_data=kwargs_data_shifted)
data_new = Data(kwargs_data=kwargs_data_new)
ra, dec = 0, 0
x, y = data.map_coord2pix(ra, dec)
x_new, y_new = data_new.map_coord2pix(ra, dec)
npt.assert_almost_equal(x, x_new, decimal=10)
npt.assert_almost_equal(y, y_new, decimal=10)
ra, dec = data.map_pix2coord(x, y)
ra_new, dec_new = data_new.map_pix2coord(x, y)
npt.assert_almost_equal(ra, ra_new, decimal=10)
npt.assert_almost_equal(dec, dec_new, decimal=10)
x_coords, y_coords = data.coordinates
x_coords_new, y_coords_new = data_new.coordinates
npt.assert_almost_equal(x_coords[0], x_coords_new[0], decimal=10)
npt.assert_almost_equal(y_coords[0], y_coords_new[0], decimal=10)
class TestImageModel(object):
"""
tests the source model routines
"""
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = .05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
psf_type = 'PIXEL' # 'gaussian', 'pixel', 'NONE'
# PSF specification
data_class = self.SimAPI.data_configure(numPix, deltaPix, exp_time, sigma_bkg)
psf_class = self.SimAPI.psf_configure(psf_type='GAUSSIAN', fwhm=fwhm, kernelsize=31, deltaPix=deltaPix,
truncate=5)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {'e1': 0.01, 'e2': 0.01} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {'theta_E': 1., 'gamma': 1.8, 'center_x': 0, 'center_y': 0, 'q': 0.8, 'phi_G': 0.2}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {'I0_sersic': 1., 'R_sersic': 0.1, 'n_sersic': 2, 'center_x': 0, 'center_y': 0}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {'I0_sersic': 1., 'R_sersic': .6, 'n_sersic': 7, 'center_x': 0, 'center_y': 0,
'phi_G': 0.2, 'q': 0.9}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [{'ra_source': 0.0, 'dec_source': 0.0,
'source_amp': 1.}] # quasar point source position in the source plane and intrinsic brightness
point_source_class = PointSource(point_source_type_list=['SOURCE_POSITION'], fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 2, 'psf_subgrid': True}
imageModel = ImageModel(data_class, psf_class, lens_model_class, source_model_class, lens_light_model_class,
point_source_class, kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens, self.kwargs_source,
self.kwargs_lens_light, self.kwargs_ps)
data_class.update_data(image_sim)
kwargs_data = data_class.constructor_kwargs()
kwargs_psf = psf_class.constructor_kwargs()
self.solver = LensEquationSolver(lensModel=lens_model_class)
multi_band_list = [[kwargs_data, kwargs_psf, kwargs_numerics]]
self.imageModel = Multiband(multi_band_list, lens_model_class, source_model_class, lens_light_model_class, point_source_class)
def test_source_surface_brightness(self):
source_model = self.imageModel.source_surface_brightness(self.kwargs_source, self.kwargs_lens, unconvolved=False, de_lensed=False)
assert len(source_model[0]) == 100
npt.assert_almost_equal(source_model[0][10, 10], 0.1370014246240874, decimal=8)
source_model = self.imageModel.source_surface_brightness(self.kwargs_source, self.kwargs_lens, unconvolved=True, de_lensed=False)
assert len(source_model[0]) == 100
npt.assert_almost_equal(source_model[0][10, 10], 0.13164547458291054, decimal=8)
def test_lens_surface_brightness(self):
lens_flux = self.imageModel.lens_surface_brightness(self.kwargs_lens_light, unconvolved=False)
npt.assert_almost_equal(lens_flux[0][50, 50], 0.4415194068014886, decimal=8)
lens_flux = self.imageModel.lens_surface_brightness(self.kwargs_lens_light, unconvolved=True)
npt.assert_almost_equal(lens_flux[0][50, 50], 4.7310552067454452, decimal=8)
def test_image_linear_solve(self):
model, error_map, cov_param, param = self.imageModel.image_linear_solve(self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light, self.kwargs_ps, inv_bool=False)
chi2_reduced = self.imageModel._imageModel_list[0].reduced_chi2(model[0], error_map[0])
npt.assert_almost_equal(chi2_reduced, 1, decimal=1)
def test_image(self):
model = self.imageModel.image(self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light, self.kwargs_ps, unconvolved=False, source_add=True, lens_light_add=True, point_source_add=True)
error_map = self.imageModel.error_map(self.kwargs_lens, self.kwargs_ps)
chi2_reduced = self.imageModel._imageModel_list[0].reduced_chi2(model[0], error_map[0])
npt.assert_almost_equal(chi2_reduced, 1, decimal=1)
def test_image_positions(self):
x_im, y_im = self.imageModel.image_positions(self.kwargs_ps, self.kwargs_lens)
ra_pos, dec_pos = self.solver.image_position_from_source(sourcePos_x=self.kwargs_ps[0]['ra_source'],
sourcePos_y=self.kwargs_ps[0]['dec_source'],
kwargs_lens=self.kwargs_lens)
ra_pos_new = x_im[0]
npt.assert_almost_equal(ra_pos_new[0], ra_pos[0], decimal=8)
npt.assert_almost_equal(ra_pos_new[1], ra_pos[1], decimal=8)
npt.assert_almost_equal(ra_pos_new[2], ra_pos[2], decimal=8)
npt.assert_almost_equal(ra_pos_new[3], ra_pos[3], decimal=8)
def test_likelihood_data_given_model(self):
logL = self.imageModel.likelihood_data_given_model(self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light, self.kwargs_ps, source_marg=False)
npt.assert_almost_equal(logL, -5100, decimal=-3)
logLmarg = self.imageModel.likelihood_data_given_model(self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light,
self.kwargs_ps, source_marg=True)
npt.assert_almost_equal(logL - logLmarg, 0, decimal=-2)
def test_numData_evaluate(self):
numData = self.imageModel.numData_evaluate()
assert numData == 10000
def test_fermat_potential(self):
phi_fermat = self.imageModel.fermat_potential(self.kwargs_lens, self.kwargs_ps)
phi_fermat = phi_fermat[0]
npt.assert_almost_equal(phi_fermat[0], -0.2719737, decimal=3)
npt.assert_almost_equal(phi_fermat[1], -0.2719737, decimal=3)
npt.assert_almost_equal(phi_fermat[2], -0.51082354, decimal=3)
npt.assert_almost_equal(phi_fermat[3], -0.51082354, decimal=3)
class TestSimulation(object):
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 1. # background noise per pixel
exp_time = 10 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
kwargs_data = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
data_class = Data(kwargs_data)
kwargs_psf = self.SimAPI.psf_configure(psf_type='GAUSSIAN',
fwhm=fwhm,
kernelsize=31,
deltaPix=deltaPix,
truncate=5)
psf_class = PSF(kwargs_psf)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
e1, e2 = param_util.phi_q2_ellipticity(0.2, 0.8)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'e1': e1,
'e2': e2
}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'amp': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'amp': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'e1': 0.2,
'e2': 0.3
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
point_source_class = PointSource(
point_source_type_list=['SOURCE_POSITION'],
fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 2, 'psf_subgrid': True}
self.imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
def test_im_sim(self):
# model specifics
# list of lens models, supports:
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
e1, e2 = param_util.phi_q2_ellipticity(0.2, 0.8)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'e1': e1,
'e2': e2
}
kwargs_lens_list = [kwargs_spemd, kwargs_shear]
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'amp': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'amp': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'e1': 0.2,
'e2': 0.3
}
kwargs_lens_light_list = [kwargs_sersic]
kwargs_source_list = [kwargs_sersic_ellipse]
kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
image_sim = self.SimAPI.simulate(self.imageModel, kwargs_lens_list,
kwargs_source_list,
kwargs_lens_light_list, kwargs_ps)
assert len(image_sim) == 100
npt.assert_almost_equal(np.sum(image_sim),
14894.805448596271,
decimal=-3)
def test_normalize_flux(self):
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
kwargs_lens_list = [kwargs_spemd, kwargs_shear]
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'amp': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'amp': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'e1': 0.2,
'e2': 0.3
}
lens_light_model_list = ['SERSIC']
kwargs_lens_light_list = [kwargs_sersic]
source_model_list = ['SERSIC_ELLIPSE']
kwargs_source_list = [kwargs_sersic_ellipse]
kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
kwargs_options = {
'lens_model_list': lens_model_list,
'lens_light_model_list': lens_light_model_list,
'source_light_model_list': source_model_list,
'psf_type': 'PIXEL',
'point_source_list': ['SOURCE_POSITION'],
'fixed_magnification': True
# if True, simulates point source at source position of 'sourcePos_xy' in kwargs_ps
}
#image_sim = self.SimAPI.simulate(self.imageModel, kwargs_lens_list, kwargs_source_list,
# kwargs_lens_light_list, kwargs_ps)
kwargs_source_updated, kwargs_lens_light_updated, kwargs_else_updated = self.SimAPI.normalize_flux(
kwargs_options,
kwargs_source_list,
kwargs_lens_light_list,
kwargs_ps,
norm_factor_source=3,
norm_factor_lens_light=2,
norm_factor_point_source=0.)
print(kwargs_else_updated, 'test')
assert kwargs_else_updated[0]['source_amp'] == 0
def test_normalize_flux_source(self):
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
kwargs_lens_list = [kwargs_spemd, kwargs_shear]
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'amp': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'amp': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'e1': 0.2,
'e2': 0.3
}
lens_light_model_list = ['SERSIC']
kwargs_lens_light_list = [kwargs_sersic]
source_model_list = ['SERSIC_ELLIPSE']
kwargs_source_list = [kwargs_sersic_ellipse]
kwargs_options = {
'lens_model_list': lens_model_list,
'lens_light_model_list': lens_light_model_list,
'source_light_model_list': source_model_list,
'psf_type': 'PIXEL',
'point_source': True
# if True, simulates point source at source position of 'sourcePos_xy' in kwargs_else
}
kwargs_source_updated = self.SimAPI.normalize_flux_source(
kwargs_options, kwargs_source_list, norm_factor_source=10)
assert kwargs_source_updated[0][
'amp'] == kwargs_source_list[0]['amp'] * 10
def test_source_plane(self):
numPix = 10
deltaPix = 0.1
kwargs_sersic_ellipse = {
'amp': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'e1': 0.2,
'e2': 0.3
}
lens_light_model_list = ['SERSIC']
source_model_list = ['SERSIC_ELLIPSE']
kwargs_source = [kwargs_sersic_ellipse]
kwargs_options = {
'lens_light_model_list': lens_light_model_list,
'source_light_model_list': source_model_list,
'psf_type': 'pixel',
'point_source': True
# if True, simulates point source at source position of 'sourcePos_xy' in kwargs_else
}
source = self.SimAPI.source_plane(kwargs_options, kwargs_source,
numPix, deltaPix)
assert len(source) == numPix
class TestFittingSequence(object):
"""
test the fitting sequences
"""
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 0.05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
data_class = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
psf_class = self.SimAPI.psf_configure(psf_type='GAUSSIAN',
fwhm=fwhm,
kernelsize=31,
deltaPix=deltaPix,
truncate=3,
kernel=None)
psf_class = self.SimAPI.psf_configure(
psf_type='PIXEL',
fwhm=fwhm,
kernelsize=31,
deltaPix=deltaPix,
truncate=6,
kernel=psf_class.kernel_point_source)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'I0_sersic': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
point_source_list = ['SOURCE_POSITION']
point_source_class = PointSource(
point_source_type_list=point_source_list,
fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps)
data_class.update_data(image_sim)
self.data_class = data_class
self.psf_class = psf_class
self.kwargs_data = data_class.constructor_kwargs()
self.kwargs_psf = psf_class.constructor_kwargs()
self.kwargs_model = {
'lens_model_list': lens_model_list,
'source_light_model_list': source_model_list,
'lens_light_model_list': lens_light_model_list,
'point_source_model_list': point_source_list,
'fixed_magnification_list': [False],
}
self.kwargs_numerics = {'subgrid_res': 2, 'psf_subgrid': True}
num_source_model = len(source_model_list)
self.kwargs_constraints = {
'joint_center_lens_light': False,
'joint_center_source_light': False,
'num_point_source_list': [4],
'additional_images_list': [False],
'fix_to_point_source_list': [False] * num_source_model,
'image_plane_source_list': [False] * num_source_model,
'solver': False,
'solver_type':
'PROFILE_SHEAR', # 'PROFILE', 'PROFILE_SHEAR', 'ELLIPSE', 'CENTER'
}
self.kwargs_likelihood = {
'force_no_add_image': True,
'source_marg': True,
'point_source_likelihood': False,
'position_uncertainty': 0.004,
'check_solver': True,
'solver_tolerance': 0.001
}
def test_simulationAPI_image(self):
npt.assert_almost_equal(self.data_class.data[4, 4], 0.1, decimal=0)
def test_simulationAPI_psf(self):
npt.assert_almost_equal(self.psf_class.kernel_pixel[1, 1],
1.681921511056146e-07,
decimal=8)
def test_fitting_sequence(self):
kwargs_init = [
self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light,
self.kwargs_ps
]
lens_sigma = [{
'theta_E_sigma': 0.1,
'gamma_sigma': 0.1,
'ellipse_sigma': 0.1,
'center_x_sigma': 0.1,
'center_y_sigma': 0.1
}, {
'shear_sigma': 0.1
}]
source_sigma = [{
'R_sersic_sigma': 0.05,
'n_sersic_sigma': 0.5,
'center_x_sigma': 0.1,
'center_y_sigma': 0.1,
'ellipse_sigma': 0.1
}]
lens_light_sigma = [{
'R_sersic_sigma': 0.05,
'n_sersic_sigma': 0.5,
'center_x_sigma': 0.1,
'center_y_sigma': 0.1
}]
ps_sigma = [{'pos_sigma': 1, 'point_amp_sigma': 1}]
kwargs_sigma = [lens_sigma, source_sigma, lens_light_sigma, ps_sigma]
kwargs_fixed = [[{}, {}], [{}], [{}], [{}]]
kwargs_params = [
kwargs_init, kwargs_sigma, kwargs_fixed, kwargs_init, kwargs_init
]
image_band = [self.kwargs_data, self.kwargs_psf, self.kwargs_numerics]
multi_band_list = [image_band]
fittingSequence = FittingSequence(multi_band_list, self.kwargs_model,
self.kwargs_constraints,
self.kwargs_likelihood,
kwargs_params)
lens_temp, source_temp, lens_light_temp, else_temp, chain_list, param_list, samples_mcmc, param_mcmc, dist_mcmc = fittingSequence.fit_sequence(
fitting_kwargs_list=[])
npt.assert_almost_equal(lens_temp[0]['theta_E'],
self.kwargs_lens[0]['theta_E'],
decimal=2)
n_p = 2
n_i = 2
"""
#image_ps = imageModel_ps.image(kwargs_ps=kwargs_ps) #plt.matshow(np.log10(image_ps), origin='lower') #plt.show() # import numpy as np import os import time import copy import corner import astropy.io.fits as pyfits import matplotlib.pyplot as plt from mpl_toolkits.axes_grid1 import make_axes_locatable from lenstronomy.SimulationAPI.simulations import Simulation SimAPI = Simulation() # import PSF file (here as a relative path in the lenstronomy_extension repository) # the psf_example.fits file can be found here: # https://github.com/sibirrer/lenstronomy_extensions/tree/master/Data/PSF_TinyTim # and imported from a local file path as well # data specifics background_rms = 0.1 # background noise per pixel (Gaussian) exp_time = 100. # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit) numPix = 21 # cutout pixel size deltaPix = 1 # pixel size in arcsec (area per pixel = deltaPix**2) fwhm = 2.5 # full width half max of PSF (only valid when psf_type='gaussian') psf_type = 'GAUSSIAN' # 'gaussian', 'pixel', 'NONE' kernel_size = 21 # initial input simulation
class TestImageModel(object):
"""
tests the source model routines
"""
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = .05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
kwargs_data = self.SimAPI.data_configure(numPix, deltaPix, exp_time, sigma_bkg)
data_class = Data(kwargs_data)
kwargs_psf = self.SimAPI.psf_configure(psf_type='GAUSSIAN', fwhm=fwhm, kernelsize=31, deltaPix=deltaPix, truncate=3,
kernel=None)
psf_class = PSF(kwargs_psf)
psf_class._psf_error_map = np.zeros_like(psf_class.kernel_point_source)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {'e1': 0.01, 'e2': 0.01} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
phi, q = 0.2, 0.8
e1, e2 = param_util.phi_q2_ellipticity(phi, q)
kwargs_spemd = {'theta_E': 1., 'gamma': 1.8, 'center_x': 0, 'center_y': 0, 'e1': e1, 'e2': e2}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {'amp': 1., 'R_sersic': 0.1, 'n_sersic': 2, 'center_x': 0, 'center_y': 0}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
phi, q = 0.2, 0.9
e1, e2 = param_util.phi_q2_ellipticity(phi, q)
kwargs_sersic_ellipse = {'amp': 1., 'R_sersic': .6, 'n_sersic': 7, 'center_x': 0, 'center_y': 0,
'e1': e1, 'e2': e2}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [{'ra_source': 0.01, 'dec_source': 0.0,
'source_amp': 1.}] # quasar point source position in the source plane and intrinsic brightness
point_source_class = PointSource(point_source_type_list=['SOURCE_POSITION'], fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 2, 'psf_subgrid': True}
imageModel = ImageModel(data_class, psf_class, lens_model_class, source_model_class, lens_light_model_class, point_source_class, kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens, self.kwargs_source,
self.kwargs_lens_light, self.kwargs_ps)
data_class.update_data(image_sim)
self.imageModel = ImageModel(data_class, psf_class, lens_model_class, source_model_class, lens_light_model_class, point_source_class, kwargs_numerics=kwargs_numerics)
self.solver = LensEquationSolver(lensModel=self.imageModel.LensModel)
def test_source_surface_brightness(self):
source_model = self.imageModel.source_surface_brightness(self.kwargs_source, self.kwargs_lens, unconvolved=False, de_lensed=False)
assert len(source_model) == 100
npt.assert_almost_equal(source_model[10, 10], 0.13939841209844345, decimal=4)
source_model = self.imageModel.source_surface_brightness(self.kwargs_source, self.kwargs_lens, unconvolved=True, de_lensed=False)
assert len(source_model) == 100
npt.assert_almost_equal(source_model[10, 10], 0.13536114618182182, decimal=4)
def test_lens_surface_brightness(self):
lens_flux = self.imageModel.lens_surface_brightness(self.kwargs_lens_light, unconvolved=False)
npt.assert_almost_equal(lens_flux[50, 50], 0.54214440654021534, decimal=4)
lens_flux = self.imageModel.lens_surface_brightness(self.kwargs_lens_light, unconvolved=True)
npt.assert_almost_equal(lens_flux[50, 50], 4.7310552067454452, decimal=4)
def test_image_linear_solve(self):
model, error_map, cov_param, param = self.imageModel.image_linear_solve(self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light, self.kwargs_ps, inv_bool=False)
chi2_reduced = self.imageModel.reduced_chi2(model, error_map)
npt.assert_almost_equal(chi2_reduced, 1, decimal=1)
def test_image_with_params(self):
model = self.imageModel.image(self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light, self.kwargs_ps, unconvolved=False, source_add=True, lens_light_add=True, point_source_add=True)
error_map = self.imageModel.error_map(self.kwargs_lens, self.kwargs_ps)
chi2_reduced = self.imageModel.reduced_chi2(model, error_map)
npt.assert_almost_equal(chi2_reduced, 1, decimal=1)
def test_point_sources_list(self):
point_source_list = self.imageModel.point_sources_list(self.kwargs_ps, self.kwargs_lens)
assert len(point_source_list) == 4
def test_image_positions(self):
x_im, y_im = self.imageModel.image_positions(self.kwargs_ps, self.kwargs_lens)
ra_pos, dec_pos = self.solver.image_position_from_source(sourcePos_x=self.kwargs_ps[0]['ra_source'],
sourcePos_y=self.kwargs_ps[0]['dec_source'],
kwargs_lens=self.kwargs_lens)
ra_pos_new = x_im[0]
print(ra_pos_new, ra_pos)
npt.assert_almost_equal(ra_pos_new[0], ra_pos[0], decimal=8)
npt.assert_almost_equal(ra_pos_new[1], ra_pos[1], decimal=8)
npt.assert_almost_equal(ra_pos_new[2], ra_pos[2], decimal=8)
npt.assert_almost_equal(ra_pos_new[3], ra_pos[3], decimal=8)
def test_likelihood_data_given_model(self):
logL = self.imageModel.likelihood_data_given_model(self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light, self.kwargs_ps, source_marg=False)
npt.assert_almost_equal(logL, -5000, decimal=-3)
logLmarg = self.imageModel.likelihood_data_given_model(self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light,
self.kwargs_ps, source_marg=True)
npt.assert_almost_equal(logL - logLmarg, 0, decimal=-3)
def test_reduced_residuals(self):
model = self.SimAPI.simulate(self.imageModel, self.kwargs_lens, self.kwargs_source,
self.kwargs_lens_light, self.kwargs_ps, no_noise=True)
residuals = self.imageModel.reduced_residuals(model, error_map=0)
npt.assert_almost_equal(np.std(residuals), 1.01, decimal=1)
chi2 = self.imageModel.reduced_chi2(model, error_map=0)
npt.assert_almost_equal(chi2, 1, decimal=1)
def test_numData_evaluate(self):
numData = self.imageModel.numData_evaluate()
assert numData == 10000
def test_fermat_potential(self):
phi_fermat = self.imageModel.fermat_potential(self.kwargs_lens, self.kwargs_ps)
print(phi_fermat)
npt.assert_almost_equal(phi_fermat[0][0], -0.2630531731871062, decimal=3)
npt.assert_almost_equal(phi_fermat[0][1], -0.2809100018126987, decimal=3)
npt.assert_almost_equal(phi_fermat[0][2], -0.5086643370512096, decimal=3)
npt.assert_almost_equal(phi_fermat[0][3], -0.5131716608238992, decimal=3)
def test_add_mask(self):
mask = np.array([[0, 1],[1, 0]])
A = np.ones((10, 4))
A_masked = self.imageModel._add_mask(A, mask)
assert A[0, 1] == A_masked[0, 1]
assert A_masked[0, 3] == 0
def test_point_source_rendering(self):
# initialize data
from lenstronomy.SimulationAPI.simulations import Simulation
SimAPI = Simulation()
numPix = 100
deltaPix = 0.05
kwargs_data = SimAPI.data_configure(numPix, deltaPix, exposure_time=1, sigma_bkg=1)
data_class = Data(kwargs_data)
kernel = np.zeros((5, 5))
kernel[2, 2] = 1
kwargs_psf = {'kernel_point_source': kernel, 'kernel_pixel': kernel, 'psf_type': 'PIXEL'}
psf_class = PSF(kwargs_psf)
lens_model_class = LensModel(['SPEP'])
source_model_class = LightModel([])
lens_light_model_class = LightModel([])
kwargs_numerics = {'subgrid_res': 2, 'point_source_subgrid': 1}
point_source_class = PointSource(point_source_type_list=['LENSED_POSITION'], fixed_magnification_list=[False])
makeImage = ImageModel(data_class, psf_class, lens_model_class, source_model_class, lens_light_model_class, point_source_class, kwargs_numerics=kwargs_numerics)
# chose point source positions
x_pix = np.array([10, 5, 10, 90])
y_pix = np.array([40, 50, 60, 50])
ra_pos, dec_pos = makeImage.Data.map_pix2coord(x_pix, y_pix)
e1, e2 = param_util.phi_q2_ellipticity(0, 0.8)
kwargs_lens_init = [{'theta_E': 1, 'gamma': 2, 'e1': e1, 'e2': e2, 'center_x': 0, 'center_y': 0}]
kwargs_else = [{'ra_image': ra_pos, 'dec_image': dec_pos, 'point_amp': np.ones_like(ra_pos)}]
model = makeImage.image(kwargs_lens_init, kwargs_source={}, kwargs_lens_light={}, kwargs_ps=kwargs_else)
image = makeImage.ImageNumerics.array2image(model)
for i in range(len(x_pix)):
npt.assert_almost_equal(image[y_pix[i], x_pix[i]], 1, decimal=2)
x_pix = np.array([10.5, 5.5, 10.5, 90.5])
y_pix = np.array([40, 50, 60, 50])
ra_pos, dec_pos = makeImage.Data.map_pix2coord(x_pix, y_pix)
phi, q = 0., 0.8
e1, e2 = param_util.phi_q2_ellipticity(phi, q)
kwargs_lens_init = [{'theta_E': 1, 'gamma': 2, 'e1': e1, 'e2': e2, 'center_x': 0, 'center_y': 0}]
kwargs_else = [{'ra_image': ra_pos, 'dec_image': dec_pos, 'point_amp': np.ones_like(ra_pos)}]
model = makeImage.image(kwargs_lens_init, kwargs_source={}, kwargs_lens_light={}, kwargs_ps=kwargs_else)
image = makeImage.ImageNumerics.array2image(model)
for i in range(len(x_pix)):
print(int(y_pix[i]), int(x_pix[i]+0.5))
npt.assert_almost_equal(image[int(y_pix[i]), int(x_pix[i])], 0.5, decimal=1)
npt.assert_almost_equal(image[int(y_pix[i]), int(x_pix[i]+0.5)], 0.5, decimal=1)
class TestFittingSequence(object):
"""
test the fitting sequences
"""
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 0.05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 50 # cutout pixel size
deltaPix = 0.1 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
self.kwargs_data = self.SimAPI.data_configure(numPix, deltaPix, exp_time, sigma_bkg)
data_class = Data(self.kwargs_data)
kwargs_psf = self.SimAPI.psf_configure(psf_type='GAUSSIAN', fwhm=fwhm, kernelsize=11, deltaPix=deltaPix,
truncate=3,
kernel=None)
self.kwargs_psf = self.SimAPI.psf_configure(psf_type='PIXEL', fwhm=fwhm, kernelsize=11, deltaPix=deltaPix,
truncate=6,
kernel=kwargs_psf['kernel_point_source'])
psf_class = PSF(self.kwargs_psf)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {'e1': 0.01, 'e2': 0.01} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {'theta_E': 1., 'gamma': 1.8, 'center_x': 0, 'center_y': 0, 'e1': 0.1, 'e2': 0.1}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
kwargs_sersic = {'amp': 1., 'R_sersic': 0.1, 'n_sersic': 2, 'center_x': 0, 'center_y': 0}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {'amp': 1., 'R_sersic': .6, 'n_sersic': 3, 'center_x': 0, 'center_y': 0,
'e1': 0.1, 'e2': 0.1}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [{'ra_source': 0.0, 'dec_source': 0.0,
'source_amp': 1.}] # quasar point source position in the source plane and intrinsic brightness
point_source_list = ['SOURCE_POSITION']
point_source_class = PointSource(point_source_type_list=point_source_list, fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
imageModel = ImageModel(data_class, psf_class, lens_model_class, source_model_class,
lens_light_model_class,
point_source_class, kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens, self.kwargs_source,
self.kwargs_lens_light, self.kwargs_ps)
data_class.update_data(image_sim)
self.data_class = data_class
self.psf_class = psf_class
self.kwargs_data['image_data'] = image_sim
self.kwargs_model = {'lens_model_list': lens_model_list,
'source_light_model_list': source_model_list,
'lens_light_model_list': lens_light_model_list,
'point_source_model_list': point_source_list,
'fixed_magnification_list': [False],
}
self.kwargs_numerics = {
'subgrid_res': 1,
'psf_subgrid': False}
num_source_model = len(source_model_list)
self.kwargs_constraints = {'joint_center_lens_light': False,
'joint_center_source_light': False,
'num_point_source_list': [4],
'additional_images_list': [False],
'fix_to_point_source_list': [False] * num_source_model,
'image_plane_source_list': [False] * num_source_model,
'solver': False,
'solver_type': 'PROFILE_SHEAR', # 'PROFILE', 'PROFILE_SHEAR', 'ELLIPSE', 'CENTER'
}
self.kwargs_likelihood = {'force_no_add_image': True,
'source_marg': True,
'point_source_likelihood': False,
'position_uncertainty': 0.004,
'check_solver': False,
'solver_tolerance': 0.001,
'check_positive_flux': True,
}
def test_simulationAPI_image(self):
npt.assert_almost_equal(self.data_class.data[4, 4], 0.1, decimal=0)
def test_simulationAPI_psf(self):
npt.assert_almost_equal(self.psf_class.kernel_pixel[1, 1], 0.0010335243878451812, decimal=6)
def test_fitting_sequence(self):
#kwargs_init = [self.kwargs_lens, self.kwargs_source, self.kwargs_lens_light, self.kwargs_ps]
lens_sigma = [{'theta_E': 0.1, 'gamma': 0.1, 'e1': 0.1, 'e2': 0.1, 'center_x': 0.1, 'center_y': 0.1}, {'e1': 0.1, 'e2': 0.1}]
lens_lower = [{'theta_E': 0., 'gamma': 1.5, 'center_x': -2, 'center_y': -2, 'e1': -0.4, 'e2': -0.4}, {'e1': -0.3, 'e2': -0.3}]
lens_upper = [{'theta_E': 10., 'gamma': 2.5, 'center_x': 2, 'center_y': 2, 'e1': 0.4, 'e2': 0.4}, {'e1': 0.3, 'e2': 0.3}]
source_sigma = [{'R_sersic': 0.05, 'n_sersic': 0.5, 'center_x': 0.1, 'center_y': 0.1, 'e1': 0.1, 'e2': 0.1}]
source_lower = [{'R_sersic': 0.01, 'n_sersic': 0.5, 'center_x': -2, 'center_y': -2, 'e1': -0.4, 'e2': -0.4}]
source_upper = [{'R_sersic': 10, 'n_sersic': 5.5, 'center_x': 2, 'center_y': 2, 'e1': 0.4, 'e2': 0.4}]
lens_light_sigma = [{'R_sersic': 0.05, 'n_sersic': 0.5, 'center_x': 0.1, 'center_y': 0.1}]
lens_light_lower = [{'R_sersic': 0.01, 'n_sersic': 0.5, 'center_x': -2, 'center_y': -2}]
lens_light_upper = [{'R_sersic': 10, 'n_sersic': 5.5, 'center_x': 2, 'center_y': 2}]
ps_sigma = [{'ra_source': 1, 'dec_source': 1, 'point_amp': 1}]
lens_param = self.kwargs_lens, lens_sigma, [{}, {}], lens_lower, lens_upper
source_param = self.kwargs_source, source_sigma, [{}], source_lower, source_upper
lens_light_param = self.kwargs_lens_light, lens_light_sigma, [{}], lens_light_lower, lens_light_upper
ps_param = self.kwargs_ps, ps_sigma, [{}], self.kwargs_ps, self.kwargs_ps
kwargs_params = {'lens_model': lens_param,
'source_model': source_param,
'lens_light_model': lens_light_param,
'point_source_model': ps_param,
#'cosmography': cosmo_param
}
#kwargs_params = [kwargs_init, kwargs_sigma, kwargs_fixed, kwargs_init, kwargs_init]
image_band = [self.kwargs_data, self.kwargs_psf, self.kwargs_numerics]
multi_band_list = [image_band]
fittingSequence = FittingSequence(multi_band_list, self.kwargs_model, self.kwargs_constraints, self.kwargs_likelihood, kwargs_params)
lens_temp, source_temp, lens_light_temp, else_temp, cosmo_temp, chain_list, param_list, samples_mcmc, param_mcmc, dist_mcmc = fittingSequence.fit_sequence(fitting_kwargs_list=[])
npt.assert_almost_equal(lens_temp[0]['theta_E'], self.kwargs_lens[0]['theta_E'], decimal=2)
n_p = 2
n_i = 2
fitting_kwargs_list = [
{'fitting_routine': 'PSO', 'sigma_scale': 1, 'n_particles': n_p, 'n_iterations': n_i},
{'fitting_routine': 'MCMC', 'sigma_scale': 0.1, 'n_burn': 1, 'n_run': 1, 'walkerRatio': 2},
{'fitting_routine': 'align_images', 'lower_limit_shift': -0.1, 'upper_limit_shift': 0.1, 'n_particles': 2, 'n_iterations': 2},
{'fitting_routine': 'psf_iteration', 'psf_iter_num': 2, 'psf_iter_factor': 0.5, 'kwargs_psf_iter': {'stacking_option': 'mean'}}
]
lens_temp, source_temp, lens_light_temp, else_temp, cosmo_temp, chain_list, param_list, samples_mcmc, param_mcmc, dist_mcmc = fittingSequence.fit_sequence(fitting_kwargs_list=fitting_kwargs_list)
npt.assert_almost_equal(lens_temp[0]['theta_E'], self.kwargs_lens[0]['theta_E'], decimal=1)
class TestOutputPlots(object):
"""
test the fitting sequences
"""
def setup(self):
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 0.05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 100 # cutout pixel size
deltaPix = 0.05 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
data_class = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
psf_class = self.SimAPI.psf_configure(psf_type='GAUSSIAN',
fwhm=fwhm,
kernelsize=31,
deltaPix=deltaPix,
truncate=3,
kernel=None)
psf_class = self.SimAPI.psf_configure(
psf_type='PIXEL',
fwhm=fwhm,
kernelsize=31,
deltaPix=deltaPix,
truncate=6,
kernel=psf_class.kernel_point_source)
# 'EXERNAL_SHEAR': external shear
kwargs_shear = {
'e1': 0.01,
'e2': 0.01
} # gamma_ext: shear strength, psi_ext: shear angel (in radian)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.8,
'center_x': 0,
'center_y': 0,
'q': 0.8,
'phi_G': 0.2
}
lens_model_list = ['SPEP', 'SHEAR']
self.kwargs_lens = [kwargs_spemd, kwargs_shear]
lens_model_class = LensModel(lens_model_list=lens_model_list)
self.LensModel = lens_model_class
# list of light profiles (for lens and source)
# 'SERSIC': spherical Sersic profile
kwargs_sersic = {
'I0_sersic': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'I0_sersic': 1.,
'R_sersic': .6,
'n_sersic': 7,
'center_x': 0,
'center_y': 0,
'phi_G': 0.2,
'q': 0.9
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [
{
'ra_source': 0.0,
'dec_source': 0.0,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
point_source_list = ['SOURCE_POSITION']
point_source_class = PointSource(
point_source_type_list=point_source_list,
fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps)
data_class.update_data(image_sim)
self.kwargs_data = data_class.constructor_kwargs()
self.kwargs_psf = psf_class.constructor_kwargs()
self.kwargs_model = {
'lens_model_list': lens_model_list,
'source_light_model_list': source_model_list,
'lens_light_model_list': lens_light_model_list,
'point_source_model_list': point_source_list,
'fixed_magnification_list': [False],
}
self.kwargs_numerics = kwargs_numerics
self.data_class = Data(self.kwargs_data)
def test_lensModelPlot(self):
lensPlot = LensModelPlot(self.kwargs_data,
self.kwargs_psf,
self.kwargs_numerics,
self.kwargs_model,
self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps,
arrow_size=0.02,
cmap_string="gist_heat",
high_res=5)
f, axes = plt.subplots(2,
3,
figsize=(16, 8),
sharex=False,
sharey=False)
lensPlot.data_plot(ax=axes[0, 0])
lensPlot.model_plot(ax=axes[0, 1])
lensPlot.normalized_residual_plot(ax=axes[0, 2], v_min=-6, v_max=6)
lensPlot.source_plot(ax=axes[1, 0],
convolution=False,
deltaPix_source=0.01,
numPix=100)
lensPlot.convergence_plot(ax=axes[1, 1], v_max=1)
lensPlot.magnification_plot(ax=axes[1, 2])
plt.close()
f, axes = plt.subplots(2,
3,
figsize=(16, 8),
sharex=False,
sharey=False)
lensPlot.decomposition_plot(ax=axes[0, 0],
text='Lens light',
lens_light_add=True,
unconvolved=True)
lensPlot.decomposition_plot(ax=axes[1, 0],
text='Lens light convolved',
lens_light_add=True)
lensPlot.decomposition_plot(ax=axes[0, 1],
text='Source light',
source_add=True,
unconvolved=True)
lensPlot.decomposition_plot(ax=axes[1, 1],
text='Source light convolved',
source_add=True)
lensPlot.decomposition_plot(ax=axes[0, 2],
text='All components',
source_add=True,
lens_light_add=True,
unconvolved=True)
lensPlot.decomposition_plot(ax=axes[1, 2],
text='All components convolved',
source_add=True,
lens_light_add=True,
point_source_add=True)
plt.close()
f, axes = plt.subplots(2,
3,
figsize=(16, 8),
sharex=False,
sharey=False)
lensPlot.subtract_from_data_plot(ax=axes[0, 0], text='Data')
lensPlot.subtract_from_data_plot(ax=axes[0, 1],
text='Data - Point Source',
point_source_add=True)
lensPlot.subtract_from_data_plot(ax=axes[0, 2],
text='Data - Lens Light',
lens_light_add=True)
lensPlot.subtract_from_data_plot(ax=axes[1, 0],
text='Data - Source Light',
source_add=True)
lensPlot.subtract_from_data_plot(
ax=axes[1, 1],
text='Data - Source Light - Point Source',
source_add=True,
point_source_add=True)
lensPlot.subtract_from_data_plot(
ax=axes[1, 2],
text='Data - Lens Light - Point Source',
lens_light_add=True,
point_source_add=True)
plt.close()
f, ax = plt.subplots(1, 1, figsize=(4, 4))
lensPlot.deflection_plot(ax=ax)
plt.close()
numPix = 100
deltaPix_source = 0.01
f, ax = plt.subplots(1, 1, figsize=(4, 4))
lensPlot.error_map_source_plot(ax, numPix, deltaPix_source)
plt.close()
f, ax = plt.subplots(1, 1, figsize=(4, 4))
lensPlot.absolute_residual_plot(ax=ax)
plt.close()
def test_lens_model_plot(self):
f, ax = plt.subplots(1, 1, figsize=(4, 4))
numPix = 100
deltaPix = 0.05
ax = output_plots.lens_model_plot(ax,
self.LensModel,
self.kwargs_lens,
numPix,
deltaPix,
sourcePos_x=0,
sourcePos_y=0,
point_source=True)
plt.close()
def test_psf_iteration_compare(self):
kwargs_psf = self.kwargs_psf
kwargs_psf['kernel_point_source_init'] = kwargs_psf[
'kernel_point_source']
f, ax = output_plots.psf_iteration_compare(kwargs_psf=kwargs_psf)
plt.close()
def test_external_shear_direction(self):
f, ax = output_plots.ext_shear_direction(
data_class=self.data_class,
lens_model_class=self.LensModel,
kwargs_lens=self.kwargs_lens,
strength_multiply=10)
plt.close()
def test_plot_chain(self):
X2_list = [1, 1, 2]
pos_list = [[1, 0], [2, 0], [3, 0]]
vel_list = [[-1, 0], [0, 0], [1, 0]]
param_list = ['test1', 'test2']
chain = X2_list, pos_list, vel_list, None
output_plots.plot_chain(chain=chain, param_list=param_list)
plt.close()
def setup(self):
np.random.seed(42)
self.SimAPI = Simulation()
# data specifics
sigma_bkg = 0.05 # background noise per pixel
exp_time = 100 # exposure time (arbitrary units, flux per pixel is in units #photons/exp_time unit)
numPix = 50 # cutout pixel size
deltaPix = 0.1 # pixel size in arcsec (area per pixel = deltaPix**2)
fwhm = 0.5 # full width half max of PSF
# PSF specification
kwargs_data = self.SimAPI.data_configure(numPix, deltaPix, exp_time,
sigma_bkg)
data_class = Data(kwargs_data)
kwargs_psf = self.SimAPI.psf_configure(psf_type='GAUSSIAN',
fwhm=fwhm,
kernelsize=11,
deltaPix=deltaPix,
truncate=3,
kernel=None)
psf_class = PSF(kwargs_psf)
kwargs_spemd = {
'theta_E': 1.,
'gamma': 1.95,
'center_x': 0,
'center_y': 0,
'e1': 0.1,
'e2': 0.1
}
lens_model_list = ['SPEP']
self.kwargs_lens = [kwargs_spemd]
lens_model_class = LensModel(lens_model_list=lens_model_list)
kwargs_sersic = {
'amp': 1.,
'R_sersic': 0.1,
'n_sersic': 2,
'center_x': 0,
'center_y': 0
}
# 'SERSIC_ELLIPSE': elliptical Sersic profile
kwargs_sersic_ellipse = {
'amp': 1.,
'R_sersic': .6,
'n_sersic': 3,
'center_x': 0,
'center_y': 0,
'e1': 0.1,
'e2': 0.1
}
lens_light_model_list = ['SERSIC']
self.kwargs_lens_light = [kwargs_sersic]
lens_light_model_class = LightModel(
light_model_list=lens_light_model_list)
source_model_list = ['SERSIC_ELLIPSE']
self.kwargs_source = [kwargs_sersic_ellipse]
source_model_class = LightModel(light_model_list=source_model_list)
self.kwargs_ps = [
{
'ra_source': 0.55,
'dec_source': 0.02,
'source_amp': 1.
}
] # quasar point source position in the source plane and intrinsic brightness
self.kwargs_cosmo = {'D_dt': 1000}
point_source_list = ['SOURCE_POSITION']
point_source_class = PointSource(
point_source_type_list=point_source_list,
fixed_magnification_list=[True])
kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
image_sim = self.SimAPI.simulate(imageModel, self.kwargs_lens,
self.kwargs_source,
self.kwargs_lens_light,
self.kwargs_ps)
data_class.update_data(image_sim)
self.data_class = data_class
self.psf_class = psf_class
kwargs_model = {
'lens_model_list': lens_model_list,
'source_light_model_list': source_model_list,
'lens_light_model_list': lens_light_model_list,
'point_source_model_list': point_source_list,
'cosmo_type': 'D_dt'
}
self.kwargs_numerics = {'subgrid_res': 1, 'psf_subgrid': False}
kwargs_constraints = {
'num_point_source_list': [4],
'additional_images_list': [True],
'solver': False,
'solver_type':
'PROFILE_SHEAR', # 'PROFILE', 'PROFILE_SHEAR', 'ELLIPSE', 'CENTER'
}
kwargs_likelihood = {
'force_no_add_image': True,
'source_marg': True,
'point_source_likelihood': True,
'position_uncertainty': 0.004,
'check_solver': True,
'solver_tolerance': 0.001,
'check_positive_flux': True,
}
self.param_class = Param(kwargs_model, kwargs_constraints)
self.imageModel = ImageModel(data_class,
psf_class,
lens_model_class,
source_model_class,
lens_light_model_class,
point_source_class,
kwargs_numerics=kwargs_numerics)
self.Likelihood = LikelihoodModule(imSim_class=self.imageModel,
param_class=self.param_class,
kwargs_likelihood=kwargs_likelihood)
