def __init__(self, parent):
self.radio = 0
self.movie = 0
self.loop = 1
self.calc = 1
self.fix = 0
wx.Panel.__init__(self, parent=parent)
#self.SetBackgroundColour("gray")
mainSizer = wx.BoxSizer(wx.VERTICAL)
grid = wx.GridBagSizer(hgap=5, vgap=5)
hsiz1 = wx.BoxSizer(wx.HORIZONTAL)
hsiz2 = wx.BoxSizer(wx.HORIZONTAL)
radioList = [
'density', 'pressure', 'temperature', 'DM contour', 'metal',
'phase diag', 'rho_dm', 'rho_gas', 'rho_star', 'SFR'
]
rb = wx.RadioBox(self,
label="Output:",
choices=radioList,
majorDimension=3,
style=wx.RA_SPECIFY_COLS)
grid.Add(rb, pos=(4, 0), span=(1, 2))
self.Bind(wx.EVT_RADIOBOX, self.EvtRadioBox, rb)
hsiz1.Add(grid, 0, wx.ALL, 5)
#calc things, not only visualize
self.hagcalc = wx.CheckBox(self, label="calc")
hsiz2.Add(self.hagcalc, 2, wx.ALL, 2)
self.Bind(wx.EVT_CHECKBOX, self.checkCalc, self.hagcalc)
self.hagcalc.SetValue(1)
# compile plots into movie?
self.hagmovie = wx.CheckBox(self, label="movie")
hsiz2.Add(self.hagmovie, 2, wx.ALL, 2)
self.Bind(wx.EVT_CHECKBOX, self.checkMovie, self.hagmovie)
#set fix comoving scale, do not use virial radius
self.hagfix = wx.CheckBox(self, label="fix r")
hsiz2.Add(self.hagfix, 2, wx.ALL, 2)
self.Bind(wx.EVT_CHECKBOX, self.checkFix, self.hagfix)
# loop?
self.hagloop = wx.CheckBox(self, label="loop")
hsiz2.Add(self.hagloop, 2, wx.ALL, 2)
self.Bind(wx.EVT_CHECKBOX, self.checkLoop, self.hagloop)
self.hagloop.SetValue(1)
self.buttonPlot = wx.Button(self, label="Plot!")
self.Bind(wx.EVT_BUTTON, self.OnPlot, self.buttonPlot)
hsiz2.Add(self.buttonPlot, 2, wx.ALL, 2)
mainSizer.Add(hsiz1, 0, wx.ALL, 5)
mainSizer.Add(hsiz2, 0, wx.ALL, 5)
# maximal gas level
lmaval = mys.get_lma()
self.lma = wx.TextCtrl(self, value=str(lmaval), size=(-1, -1))
vbox = wx.BoxSizer(wx.HORIZONTAL)
vbox.Add(self.lma, 1, wx.ALL)
self.Bind(wx.EVT_TEXT, self.setLMA, self.lma)
mainSizer.Add(vbox, 0, wx.ALL, 5)
self.SetSizerAndFit(mainSizer)
def __init__(self, parent):
self.radio=0; self.movie=0; self.loop=1; self.calc=1; self.fix=0
wx.Panel.__init__(self, parent=parent)
#self.SetBackgroundColour("gray")
mainSizer = wx.BoxSizer(wx.VERTICAL)
grid = wx.GridBagSizer(hgap=5, vgap=5)
hsiz1 = wx.BoxSizer(wx.HORIZONTAL)
hsiz2 = wx.BoxSizer(wx.HORIZONTAL)
radioList = [
'density', 'pressure', 'temperature',
'DM contour', 'metal', 'phase diag',
'rho_dm', 'rho_gas', 'rho_star',
'SFR']
rb = wx.RadioBox(self, label="Output:",
choices=radioList, majorDimension=3,
style=wx.RA_SPECIFY_COLS)
grid.Add(rb, pos=(4,0), span=(1,2))
self.Bind(wx.EVT_RADIOBOX, self.EvtRadioBox, rb)
hsiz1.Add(grid, 0, wx.ALL, 5)
#calc things, not only visualize
self.hagcalc = wx.CheckBox(self, label="calc")
hsiz2.Add(self.hagcalc, 2, wx.ALL, 2)
self.Bind(wx.EVT_CHECKBOX, self.checkCalc, self.hagcalc)
self.hagcalc.SetValue(1)
# compile plots into movie?
self.hagmovie = wx.CheckBox(self, label="movie")
hsiz2.Add(self.hagmovie, 2, wx.ALL, 2)
self.Bind(wx.EVT_CHECKBOX, self.checkMovie, self.hagmovie)
#set fix comoving scale, do not use virial radius
self.hagfix = wx.CheckBox(self, label="fix r")
hsiz2.Add(self.hagfix, 2, wx.ALL, 2)
self.Bind(wx.EVT_CHECKBOX, self.checkFix, self.hagfix)
# loop?
self.hagloop = wx.CheckBox(self, label="loop")
hsiz2.Add(self.hagloop, 2, wx.ALL, 2)
self.Bind(wx.EVT_CHECKBOX, self.checkLoop, self.hagloop)
self.hagloop.SetValue(1)
self.buttonPlot =wx.Button(self, label="Plot!")
self.Bind(wx.EVT_BUTTON, self.OnPlot,self.buttonPlot)
hsiz2.Add(self.buttonPlot, 2, wx.ALL, 2)
mainSizer.Add(hsiz1, 0, wx.ALL, 5); mainSizer.Add(hsiz2, 0, wx.ALL, 5)
# maximal gas level
lmaval = mys.get_lma()
self.lma = wx.TextCtrl(self, value=str(lmaval), size=(-1,-1))
vbox = wx.BoxSizer(wx.HORIZONTAL)
vbox.Add(self.lma, 1,wx.ALL)
self.Bind(wx.EVT_TEXT, self.setLMA, self.lma)
mainSizer.Add(vbox, 0, wx.ALL, 5)
self.SetSizerAndFit(mainSizer)
def OnPlot(self, event):
print("plot")
f=1 # scaling of sphere wrt rvir
vis = True; show = True; run = True;
my.mkdir(mys.simdir()+"/ana")
ddm = mys.simdir() + "/ana/dm/"; my.mkdir(ddm)
dgas = mys.simdir() + "/ana/gas/"; my.mkdir(dgas)
dstar= mys.simdir() + "/ana/stars/"; my.mkdir(dstar)
dpd = mys.simdir() + "/phasediag/"; my.mkdir(dpd)
nstart,nstop=mys.get_range()
x,y,z,r,snap=mys.getxyzrsnap(nstop)#TODO: nstart,nstop
xs,ys,zs,rs,snap=mys.getxyzrsnap_stars(nstart,nstop)
#x,y,z,r,snap=mys.mt_xyzrsnap(nstart,nstop)
#xs,ys,zs,rs,snap=mys.mt_xyzrsnap_stars(nstart,nstop)
for i in range(nstop-nstart+1):
nc = nstop-i
if(not mys.snap_exists(nc)):
continue
stri=str(nc).zfill(5)
print("nc = ",nc)
print(x[i], xs[i])
print(y[i], ys[i])
print(z[i], zs[i])
print(r[i], rs[i])
d = mys.d(nc)
# scale
if self.fix:
r[i]=0.002; rs[i]=0.002;
sx = str(x[i])
sy = str(y[i])
sz = str(z[i])
sr = str(r[i])
ssx= str(sx[i])
ssy= str(ys[i])
ssz= str(sz[i])
ssr= str(rs[i])
lma = str(mys.get_lma())
bndry = " "+sx+" "+sy+" "+sz+" "+sr+" "
bndryc =" -xc "+sx+" -yc "+sy+" -zc "+sz+" -rc "+sr+" "
#calc all pix, dep. on which option was clicked
if self.radio==0:
print("gas density")
ofname = dgas+"gas_boxall_"+stri+".png"
cmd1 = amr2map+" -typ 1 -lma "+lma+" -inp "+d+" -out "+dgas+"gas_boxall_"+stri
cmd1 = cmd1 +".dat -dir z "+bndryc
cmd2 = "map2img.py -l --colormap=hot "+dgas+"gas_boxall_"+stri+".dat "
cmd2 = cmd2+"-o "+ofname+" && xview "+ofname
print(dgas+"gas_boxall_"+stri+".png")
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if self.radio==1:
print("gas pressure")
if(mys.is_dmonly()):
print("not available, dm only simulation!")
exit
cmd1 = amr2map + " -typ 5 -lma "+lma+" -inp "+d
cmd1 = cmd1+" -out "+dgas+"p_"+stri+".dat "+"-dir z "+bndryc
cmd2 = "map2img.py -l --colormap=hot "+dgas+"p_"+stri+".dat "
ofname = dgas+"p_"+stri+".png"
cmd2 = cmd2+" -o "+ofname+" && xview "+ofname
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if self.radio==2:
print("gas temperature")
cmd1 = amr2map+" -typ 18 -lma "+lma+" -inp "+d
cmd1 = cmd1+" -out "+dgas+"temp_"+stri+".dat "+"-dir z "+bndryc
cmd2 = "map2img.py -l --colormap=hot "+dgas+"temp_"+stri+".dat "
ofname = dgas+"temp_"+stri+".png"
cmd2 = cmd2+" -o "+ofname+" && xview "+ofname
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if self.radio==3:
print("DM contours")
# get DM particle positions for each halo
cmd1 = "get_sphere_dm -inp "+d+bndryc+" > "+ddm+"dm_"+stri+".dat"
cmd1+= "&& octreef "+ddm+"dm_"+stri+".dat > "+ddm+"rho_"+stri+".dat"
cmd2 ="vis_part_proj_dm.py "+bndry+" "\
+ddm+"dm_"+stri+".dat "+ddm+"dm_part_"+stri+".png"
ofname=ddm+"rho_"+stri+".dat "+ddm+"contour_"+stri+".png"
cmd2+="; vis_dm_contour.py "+bndry+" "\
+ofname+" && xview "+ofname
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if self.radio==4:
print("metallicity")
#cmd = "vis_parts.py stars.part"
#cmd = "get_sphere_stars -inp "+d\
#+" -xc "+sx+" -yc "+sy+" -zc "+sz+" -r "+sr+">ana/stars/stars_"+stri
cmd1 = "metal2map -inp "+d+" -out "+dstar+"stars_"+stri+".dat "
cmd1 = cmd1+"-nx 512 -ny 512 -dir z "+bndryc
cmd2 = "map2img.py -l --colormap=jet "+dstar+"stars_"+stri+".dat "
ofname = dstar+"stars_"+stri+".png"
cmd2 = cmd2+"-o "+ofname+" && xview "+ofname
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if self.radio==5:
print("phase diagram")
fn = dpd+"temp_"+str(nc).zfill(5)
cmd1 = "get_temp -inp "+d+" -out "+fn
cmd1+= " -lma "+lma+" -typ 18"
ofname=fn+".png"
cmd2 = "plot_temp_rho.py "+fn+" "+ofname+" && xview "+ofname
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if self.radio==6:
print("rho_dm(r)")
cmd1 = "gen_prof_dm.py "+str(nc)+" "+sx+" "+sy+" "+sz+" "+sr;
ofname = ddm+"prof_"+stri+".png "
cmd2 = "plot_prof_sph.py "+ddm+"prof_"+stri+".dat "\
+ddm+"rho_"+stri+".dat "\
+ofname+sx+" "+sy+" "+sz+" "+str(mys.get_z(nc))+"&& xview "+ofname
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if self.radio==7:
print("rho_gas(r)")
cmd1 = "gen_prof_gas.py "+str(nc)+" "+sx+" "+sy+" "+sz+" "+sr+" "+lma;
ofname = dgas+"prof_"+stri+".png "
cmd2 = "plot_prof_sph.py "+dgas+"prof_"+stri+".dat "\
+dgas+"rho_"+stri+".dat "\
+ofname+sx+" "+sy+" "+sz+" && xview "+ofname
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if self.radio==8:
print("rho_star(r)")
cmd1 = "gen_prof_stars.py "+str(nc)+" "+sx+" "+sy+" "+sz+" "+sr;
ofname = dstar+"prof_"+stri+".png "
cmd2 = "plot_prof_sph.py "+dstar+"prof_"+stri+".dat "\
+dstar+"rho_"+stri+".dat "\
+ofname+sx+" "+sy+" "+sz+" && xview "+ofname
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if self.radio==9:
print("SFR")
cmd1 = "count_stars -inp "+d+bndryc+" >> "+dstar+"star_counts.dat"
#cmd2 = "plot_columns.py star_counts.dat 1 4"
cmd2 = "calc_sfr.py "+dstar+"star_counts.dat 0 4"
my.threadif(cmd1,cmd2,self.calc,vis,show,run)
if(not self.loop):
break
my.done()
def OnPlot(self, event):
print("plot")
f = 1 # scaling of sphere wrt rvir
vis = True
show = True
run = True
my.mkdir(mys.simdir() + "/ana")
ddm = mys.simdir() + "/ana/dm/"
my.mkdir(ddm)
dgas = mys.simdir() + "/ana/gas/"
my.mkdir(dgas)
dstar = mys.simdir() + "/ana/stars/"
my.mkdir(dstar)
dpd = mys.simdir() + "/phasediag/"
my.mkdir(dpd)
nstart, nstop = mys.get_range()
x, y, z, r, snap = mys.getxyzrsnap(nstop) #TODO: nstart,nstop
xs, ys, zs, rs, snap = mys.getxyzrsnap_stars(nstart, nstop)
#x,y,z,r,snap=mys.mt_xyzrsnap(nstart,nstop)
#xs,ys,zs,rs,snap=mys.mt_xyzrsnap_stars(nstart,nstop)
for i in range(nstop - nstart + 1):
nc = nstop - i
if (not mys.snap_exists(nc)):
continue
stri = str(nc).zfill(5)
print("nc = ", nc)
print(x[i], xs[i])
print(y[i], ys[i])
print(z[i], zs[i])
print(r[i], rs[i])
d = mys.d(nc)
# scale
if self.fix:
r[i] = 0.002
rs[i] = 0.002
sx = str(x[i])
sy = str(y[i])
sz = str(z[i])
sr = str(r[i])
ssx = str(sx[i])
ssy = str(ys[i])
ssz = str(sz[i])
ssr = str(rs[i])
lma = str(mys.get_lma())
bndry = " " + sx + " " + sy + " " + sz + " " + sr + " "
bndryc = " -xc " + sx + " -yc " + sy + " -zc " + sz + " -rc " + sr + " "
#calc all pix, dep. on which option was clicked
if self.radio == 0:
print("gas density")
ofname = dgas + "gas_boxall_" + stri + ".png"
cmd1 = amr2map + " -typ 1 -lma " + lma + " -inp " + d + " -out " + dgas + "gas_boxall_" + stri
cmd1 = cmd1 + ".dat -dir z " + bndryc
cmd2 = "map2img.py -l --colormap=hot " + dgas + "gas_boxall_" + stri + ".dat "
cmd2 = cmd2 + "-o " + ofname + " && xview " + ofname
print(dgas + "gas_boxall_" + stri + ".png")
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if self.radio == 1:
print("gas pressure")
if (mys.is_dmonly()):
print("not available, dm only simulation!")
exit
cmd1 = amr2map + " -typ 5 -lma " + lma + " -inp " + d
cmd1 = cmd1 + " -out " + dgas + "p_" + stri + ".dat " + "-dir z " + bndryc
cmd2 = "map2img.py -l --colormap=hot " + dgas + "p_" + stri + ".dat "
ofname = dgas + "p_" + stri + ".png"
cmd2 = cmd2 + " -o " + ofname + " && xview " + ofname
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if self.radio == 2:
print("gas temperature")
cmd1 = amr2map + " -typ 18 -lma " + lma + " -inp " + d
cmd1 = cmd1 + " -out " + dgas + "temp_" + stri + ".dat " + "-dir z " + bndryc
cmd2 = "map2img.py -l --colormap=hot " + dgas + "temp_" + stri + ".dat "
ofname = dgas + "temp_" + stri + ".png"
cmd2 = cmd2 + " -o " + ofname + " && xview " + ofname
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if self.radio == 3:
print("DM contours")
# get DM particle positions for each halo
cmd1 = "get_sphere_dm -inp " + d + bndryc + " > " + ddm + "dm_" + stri + ".dat"
cmd1 += "&& octreef " + ddm + "dm_" + stri + ".dat > " + ddm + "rho_" + stri + ".dat"
cmd2 ="vis_part_proj_dm.py "+bndry+" "\
+ddm+"dm_"+stri+".dat "+ddm+"dm_part_"+stri+".png"
ofname = ddm + "rho_" + stri + ".dat " + ddm + "contour_" + stri + ".png"
cmd2+="; vis_dm_contour.py "+bndry+" "\
+ofname+" && xview "+ofname
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if self.radio == 4:
print("metallicity")
#cmd = "vis_parts.py stars.part"
#cmd = "get_sphere_stars -inp "+d\
#+" -xc "+sx+" -yc "+sy+" -zc "+sz+" -r "+sr+">ana/stars/stars_"+stri
cmd1 = "metal2map -inp " + d + " -out " + dstar + "stars_" + stri + ".dat "
cmd1 = cmd1 + "-nx 512 -ny 512 -dir z " + bndryc
cmd2 = "map2img.py -l --colormap=jet " + dstar + "stars_" + stri + ".dat "
ofname = dstar + "stars_" + stri + ".png"
cmd2 = cmd2 + "-o " + ofname + " && xview " + ofname
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if self.radio == 5:
print("phase diagram")
fn = dpd + "temp_" + str(nc).zfill(5)
cmd1 = "get_temp -inp " + d + " -out " + fn
cmd1 += " -lma " + lma + " -typ 18"
ofname = fn + ".png"
cmd2 = "plot_temp_rho.py " + fn + " " + ofname + " && xview " + ofname
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if self.radio == 6:
print("rho_dm(r)")
cmd1 = "gen_prof_dm.py " + str(
nc) + " " + sx + " " + sy + " " + sz + " " + sr
ofname = ddm + "prof_" + stri + ".png "
cmd2 = "plot_prof_sph.py "+ddm+"prof_"+stri+".dat "\
+ddm+"rho_"+stri+".dat "\
+ofname+sx+" "+sy+" "+sz+" "+str(mys.get_z(nc))+"&& xview "+ofname
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if self.radio == 7:
print("rho_gas(r)")
cmd1 = "gen_prof_gas.py " + str(
nc) + " " + sx + " " + sy + " " + sz + " " + sr + " " + lma
ofname = dgas + "prof_" + stri + ".png "
cmd2 = "plot_prof_sph.py "+dgas+"prof_"+stri+".dat "\
+dgas+"rho_"+stri+".dat "\
+ofname+sx+" "+sy+" "+sz+" && xview "+ofname
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if self.radio == 8:
print("rho_star(r)")
cmd1 = "gen_prof_stars.py " + str(
nc) + " " + sx + " " + sy + " " + sz + " " + sr
ofname = dstar + "prof_" + stri + ".png "
cmd2 = "plot_prof_sph.py "+dstar+"prof_"+stri+".dat "\
+dstar+"rho_"+stri+".dat "\
+ofname+sx+" "+sy+" "+sz+" && xview "+ofname
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if self.radio == 9:
print("SFR")
cmd1 = "count_stars -inp " + d + bndryc + " >> " + dstar + "star_counts.dat"
#cmd2 = "plot_columns.py star_counts.dat 1 4"
cmd2 = "calc_sfr.py " + dstar + "star_counts.dat 0 4"
my.threadif(cmd1, cmd2, self.calc, vis, show, run)
if (not self.loop):
break
my.done()