def goToPrimPattern(self, curPoint, nextPoint, pat, tbn, pointWhichIsRelative):
'''
TBN aplication
'''
global epsilon
for num in range(len(pat.points)):
pat.points[num] = tbn.mulPoint3ToMatrix3(pat.points[num])
pat.points[num] = GeoMath.vecPlus(pointWhichIsRelative, pat.points[num])
# Transform normal vector also
logging.debug("Changing normal" + str(pat.getNormal()))
transformed_normal = tbn.mulPoint3ToMatrix3(pat.getNormal())
logging.debug("Transformed normal" + str(transformed_normal))
normalized_normal = GeoMath.vecNormalize(transformed_normal)
logging.debug("normalized normal" + str(normalized_normal))
pat.setNormal(normalized_normal)
logging.debug("normalized normal set?? " + str(pat.getNormal()))
trans = GeoMath.vecSub(curPoint, pat.getFirstPoint())
likelyPointF = GeoMath.vecPlus(pat.getLastPoint(), trans)
if(GeoMath.vecModul(GeoMath.vecSub(likelyPointF, nextPoint)) > epsilon):
trans = GeoMath.vecSub(curPoint, pat.getLastPoint())
for num in range(len(pat.getPoints())):
pat.points[num] = self.translatePointToPrim(pat.points[num], trans)
if(GeoMath.vecModul(GeoMath.vecSub(likelyPointF, nextPoint)) > epsilon):
pat.points.reverse()
def bresenham(Ipoint, point1, fPoint, xSize, ySize, prim, exception):
reload (GeoMath)
reload (DetermineVectors)
reload (Validator)
curPoint = point1
dirVec = GeoMath.vecNormalize(GeoMath.vecSub(fPoint, Ipoint))
# Get the horizontal and vertical vectors
xVec, yVec = DetermineVectors.DetermineVectors.detVec(prim, dirVec, exception)
xSizeVec = GeoMath.vecScalarProduct(xVec, xSize)
ySizeVec = GeoMath.vecScalarProduct(yVec, ySize)
vecToFinal = GeoMath.vecSub(curPoint, fPoint)
sizeToFinalx = abs(GeoMath.vecDotProduct(vecToFinal, xVec) / GeoMath.vecModul(xVec))
sizeToFinaly = abs(GeoMath.vecDotProduct(vecToFinal, yVec) / GeoMath.vecModul(yVec))
if(sizeToFinalx > xSize or sizeToFinaly > ySize):
pointx = GeoMath.vecPlus(curPoint, xSizeVec)
pointy = GeoMath.vecPlus(curPoint, ySizeVec)
pointxy = GeoMath.vecPlus(curPoint, xSizeVec)
pointxy = GeoMath.vecPlus(pointxy, ySizeVec)
curxVec = GeoMath.vecNormalize(GeoMath.vecSub(pointx, Ipoint))
curyVec = GeoMath.vecNormalize(GeoMath.vecSub(pointy, Ipoint))
curxyVec = GeoMath.vecNormalize(GeoMath.vecSub(pointxy, Ipoint))
# We get the max dot product, the vector nearest to line
dotx = GeoMath.vecDotProduct(curxVec, dirVec)
doty = GeoMath.vecDotProduct(curyVec, dirVec)
dotxy = GeoMath.vecDotProduct(curxyVec, dirVec)
pointsTemp = {}
if(Validator.Validator.pointInsidePrim(pointx, prim)): pointsTemp[dotx] = pointx
if(Validator.Validator.pointInsidePrim(pointy, prim)): pointsTemp[doty] = pointy
if(Validator.Validator.pointInsidePrim(pointxy, prim)): pointsTemp[dotxy] = pointxy
if(not pointsTemp):
point = list(fPoint)
else:
bestPoint = list(pointsTemp[sorted(pointsTemp)[len(pointsTemp) - 1]])
point = bestPoint
else:
point = list(fPoint)
'''
if(prim.number()==54):
print "Ipoint, fpoint"
print Ipoint, fPoint
print "pointx, pointy, pointxy"
print pointx, pointy, pointxy
print "Dots"
print dotx, doty, dotxy
print "sizes"
print sizeToFinalx, sizeToFinaly
print "Point"
print point
'''
return point
def applyJoker(self, point1, point2, vecH, vecV):
vec = GeoMath.vecSub(point2, point1)
dotH = GeoMath.vecDotProduct(vec, vecH) / GeoMath.vecModul(vecH)
dotV = GeoMath.vecDotProduct(vec, vecV) / GeoMath.vecModul(vecV)
if(math.fabs(dotH) < math.fabs(dotV)):
normal = GeoMath.vecNormalize(vecH)
else:
normal = GeoMath.vecNormalize(vecV)
norV = GeoMath.vecNormalize(vecV)
norH = GeoMath.vecNormalize(vecH)
sizeX = GeoMath.vecModul(GeoMath.vecScalarProduct(norH, dotH))
sizeY = GeoMath.vecModul(GeoMath.vecScalarProduct(norV, dotV))
pointI1 = GeoMath.vecPlus(point1, GeoMath.vecScalarProduct(norH, dotH / 2))
pointI2 = GeoMath.vecPlus(pointI1, GeoMath.vecScalarProduct(norV, dotV))
return WallPattern(normal, [list(point1), pointI1, pointI2, list(point2)], [sizeX, sizeY], 0)
def applyJoker(self, point1, point2, vecH, vecV):
vec = GeoMath.vecSub(point2, point1)
dotH = GeoMath.vecDotProduct(vec, vecH) / GeoMath.vecModul(vecH)
dotV = GeoMath.vecDotProduct(vec, vecV) / GeoMath.vecModul(vecV)
if (math.fabs(dotH) < math.fabs(dotV)):
normal = GeoMath.vecNormalize(vecH)
else:
normal = GeoMath.vecNormalize(vecV)
norV = GeoMath.vecNormalize(vecV)
norH = GeoMath.vecNormalize(vecH)
sizeX = GeoMath.vecModul(GeoMath.vecScalarProduct(norH, dotH))
sizeY = GeoMath.vecModul(GeoMath.vecScalarProduct(norV, dotV))
pointI1 = GeoMath.vecPlus(point1,
GeoMath.vecScalarProduct(norH, dotH / 2))
pointI2 = GeoMath.vecPlus(pointI1,
GeoMath.vecScalarProduct(norV, dotV))
return WallPattern(normal,
[list(point1), pointI1, pointI2,
list(point2)], [sizeX, sizeY], 0)
def create_grid(self, floor_):
global FLOOR_SIZE
reload(HouInterface)
points = floor_.get_absolute_points()
center = GeoMath.centerOfPoints(points)
vec1 = GeoMath.vecSub(points[0], points[1])
vec2 = GeoMath.vecSub(points[2], points[1])
if (vec1[0] != 0):
vecx = GeoMath.vecModul(vec1)
vecz = GeoMath.vecModul(vec2)
else:
vecx = GeoMath.vecModul(vec2)
vecz = GeoMath.vecModul(vec1)
columns = vecx / TILE_SIZE
rows = vecz / TILE_SIZE
gridName = self.hout.showGrid('floor', center, vecx, vecz, rows, columns)
return gridName
def create_grid(self, floor_):
global FLOOR_SIZE
reload(HouInterface)
points = floor_.get_absolute_points()
center = GeoMath.centerOfPoints(points)
vec1 = GeoMath.vecSub(points[0], points[1])
vec2 = GeoMath.vecSub(points[2], points[1])
if (vec1[0] != 0):
vecx = GeoMath.vecModul(vec1)
vecz = GeoMath.vecModul(vec2)
else:
vecx = GeoMath.vecModul(vec2)
vecz = GeoMath.vecModul(vec1)
columns = vecx / TILE_SIZE
rows = vecz / TILE_SIZE
gridName = self.hout.showGrid('floor', center, vecx, vecz, rows,
columns)
return gridName
def checkTexture(self, texture, previousTexture, genPattern, Fpoint, nextPoint):
tex, nearestPointIntersect, minDistance = texture.findIntersectionWithNearestTexture(genPattern.getPoints())
logging.debug("Start method checkTexture, class Crack")
if(tex):
logging.debug('nearestPointIntersect: ' + str(nearestPointIntersect) + 'Distance: ' + str(minDistance) + 'Texture: ' + str(tex.get_material().get_name()))
else:
logging.debug('nearestPointIntersect: ' + str(nearestPointIntersect) + 'Distance: ' + str(minDistance) + 'No Texture')
# If we found some interect point we clip the pattern to this point
if(nearestPointIntersect):
achieved = genPattern.clipPattern(nearestPointIntersect)
if(not achieved):
logging.error("No clipping achieved")
return None, previousTexture
else:
return None, previousTexture
# Now we have to ensure that the next texture is correct, because possibly the intersection
# is correct and the next texture in pattern direction is correct, but maybe the direction
# has changed due to the clipping of the pattern and the point clipped. The direction now is
# the direction between point clipped-intersected with next texture and the final point of
# the crack in prim.
# also, in the NORMAL case, maybe the pattern intersect with his texture, because are exiting
# from it, so we have to do a point in polygon to search what texture is the next
# Check texture, for do that get the vector direction and do it little and do a point in
# polygon with the texture
nextDir = GeoMath.vecSub(Fpoint, nearestPointIntersect)
logging.debug('next dir before', str(nextDir))
if(GeoMath.vecModul(nextDir) > 0):
nextDir = GeoMath.vecNormalize(nextDir)
# make it little, not more little than the epsilon used at GeoMath pointInSegmentDistance method,
# so we use a 10x bigger than epsilon, so 0.05
nextDir = GeoMath.vecScalarProduct(nextDir, 0.05)
nextPoint = GeoMath.vecPlus(nextDir, nearestPointIntersect)
nextTex = texture.findUpperTextureContainingPoint(nextPoint)
logging.debug('Direction and texture , next point: %s, next direction', str(nextPoint), str(nextDir))
else:
nextTex = None
# We get the final point, so we not have to ensure anything
logging.debug("End method checkTexture, class Crack")
if(nearestPointIntersect):
self.intersectionPoints.append(nearestPointIntersect)
return nearestPointIntersect, nextTex
def getPossiblePatterns(self, curPoint, nextPoint, setClass, epsilon, setPat, vector, vectorRotated, pat):
match = False
goodPattern = None
copyPat = pat.copy()
vecPat = GeoMath.vecSub(copyPat.points[len(copyPat.points) - 1], copyPat.points[0])
vecPatIn = GeoMath.vecSub(copyPat.points[0], pat.points[len(copyPat.points) - 1])
logging.debug("Index pat %s", str(setPat.index(pat)))
logging.debug("Vectors")
logging.debug("Vector in prim %s", str(vector))
logging.debug("Pattern vector %s", str(vecPat))
logging.debug("Vector rotated %s", str(vectorRotated))
logging.debug("Curpooint %s", str(curPoint))
logging.debug("NextPoint %s", str(nextPoint))
# Same length
if (math.fabs(GeoMath.vecModul(vecPat) - GeoMath.vecModul(vectorRotated)) < epsilon):
rest = GeoMath.vecSub(vectorRotated, vecPat)
restIn = GeoMath.vecSub(vectorRotated, vecPatIn)
# Same direction
if ((GeoMath.vecModul(rest) < epsilon) or (GeoMath.vecModul(restIn) < epsilon)):
goodPattern = copyPat
match = True # No same direction
if (match == False):
'''
See simetry in this order:
1-rot in z
2-rot in y
3-rot in x
'''
anglez = setClass.getRotz()
if (anglez != 0):
Rzva = GeoMath.Matrix(4, 4)
Rzva.singleRotz(anglez)
copyVecPat = list(vecPat)
copyVecPat.append(0)
numRotations = 0
if (anglez == 0):
maxRot = 0
else:
maxRot = (360 / anglez) - 1
while numRotations < (maxRot) and not match:
copyVecPat = Rzva.mulPoint4ToMatrix4(copyVecPat) # Not necesary to delete the last number in vector(which added for homogeneous)
restRz = GeoMath.vecSub(copyVecPat, vectorRotated)
restInRz = GeoMath.vecSub(GeoMath.vecSub([0, 0, 0], copyVecPat), vectorRotated)
numRotations += 1
if ((numRotations <= maxRot) and (GeoMath.vecModul(restRz) < epsilon or GeoMath.vecModul(restInRz) < epsilon)):
anglezTot = numRotations * anglez
copyPat.rotatePattern([0, 0, 1], anglezTot)
goodPattern = copyPat
match = True
# Rotation in y if in z is not valid
simRoty = setClass.getSimY(copyPat)
if (not match and simRoty):
Ry = GeoMath.Matrix(4, 4)
Ry.singleRoty(180)
copyVecPat = list(vecPat)
copyVecPatIn = list(vecPatIn)
copyVecPat.append(0)
copyVecPatIn.append(0)
copyVecPat = Ry.mulPoint4ToMatrix4(copyVecPat)
copyVecPatIn = Ry.mulPoint4ToMatrix4(copyVecPatIn) # Not necesary to delete the last number in vector(which added for homogeneous)
restRy = GeoMath.vecSub(copyVecPat, vectorRotated)
restRyIn = GeoMath.vecSub(copyVecPatIn, vectorRotated)
if (GeoMath.vecModul(restRy) < epsilon or (GeoMath.vecModul(restRyIn) < epsilon)):
copyPat.rotatePattern([0, 1, 0], 180)
goodPattern = copyPat
match = True # Rotation in x if in z neither y is valid
simRotx = setClass.getSimX(copyPat)
if (not match and simRotx):
Rx = GeoMath.Matrix(4, 4)
Rx.singleRotx(180)
copyVecPat = list(vecPat)
copyVecPatIn = list(vecPatIn)
copyVecPat.append(0)
copyVecPatIn.append(0)
copyVecPat = Rx.mulPoint4ToMatrix4(copyVecPat)
copyVecPatIn = Rx.mulPoint4ToMatrix4(copyVecPatIn) # Not necesary to delete the last number in vector(which added for homogeneous)
restRx = GeoMath.vecSub(copyVecPat, vectorRotated)
restRxIn = GeoMath.vecSub(copyVecPatIn, vectorRotated)
if (GeoMath.vecModul(restRx) < epsilon or (GeoMath.vecModul(restRxIn) < epsilon)):
copyPat.rotatePattern([1, 0, 0], 180)
goodPattern = copyPat
match = True
return goodPattern
def add_noise(self, height, frequency, for_edge):
if (GeoMath.vecModul(self.getNormal()) > 0):
# If normal of pattern is valid
ad = Add_noise()
self.points = ad.apply_noise(self.points, self.normal, height,
for_edge, frequency)
def find_path(self, gridName, startPoint, finalPoint):
reload(GeoMath)
path = []
grid = self.hout.grids[gridName][0]
logging.debug('grid name ' + str(grid))
prims = grid.geometry().prims()
startPrim, finalPrim = self.findExtremePrims(startPoint, finalPoint, prims)
if (startPrim == None or finalPrim == None):
logging.debug("Start and final prims can't be ensured since the intersections_with_crack with the crack are a little misplaced, and that cause pointInEdge to fail when trying to know which primitive is the start and the final")
# Unique prim
if (finalPrim.number() == startPrim.number()):
uniquePrim = InfoPathPrim.InfoPathPrim(startPrim)
uniquePrim.setiPoint(startPoint)
uniquePrim.setfPoint(finalPoint)
return [uniquePrim]
logging.debug("prims with floor " + str(
[startPrim.number(), finalPrim.number()]))
navigationLine = GeoMath.vecSub(finalPoint, startPoint)
mappedStartPoint = [startPoint[0], startPoint[2], 0]
mappedFinalPoint = [finalPoint[0], finalPoint[2], 0]
primsInPath = []
for prim in prims:
if (prim.number() == startPrim.number() or prim.number() == finalPrim.number()):
continue
edges = GeoMath.getEdgesFromPrim(prim)
mappedEdges = [[[edge[0][0], edge[0][2], 0], [edge[1][0], edge[1][2], 0]]
for edge in edges]
logging.debug("prim number " + str(prim.number()))
inters = GeoMath.getIntersectionsBetweenEdges2D(
mappedEdges, [[mappedStartPoint, mappedFinalPoint]])
if (inters):
logging.debug("Inter in path " + str(inters))
# Demap again to original 'y' component, which both start point or
# final point have
demappedInters = [[inter[0], startPoint[1], inter[1]]
for inter in inters]
distPoint0 = GeoMath.vecModul(
GeoMath.vecSub(demappedInters[0], startPoint))
distPoint1 = GeoMath.vecModul(
GeoMath.vecSub(demappedInters[1], startPoint))
if (distPoint0 < distPoint1):
startPrimPoint = demappedInters[0]
finalPrimPoint = demappedInters[1]
else:
startPrimPoint = demappedInters[1]
finalPrimPoint = demappedInters[0]
infoPrim = InfoPathPrim.InfoPathPrim(prim)
infoPrim.setiPoint(startPrimPoint)
infoPrim.setfPoint(finalPrimPoint)
primsInPath.append(infoPrim)
logging.debug("Prim intersects " + str(prim.number()) + " " + str(startPrimPoint) + " " + str(finalPrimPoint))
sorted(primsInPath, key=lambda infoPrim:
GeoMath.vecModul(GeoMath.vecSub(infoPrim.iPoint, startPoint)))
logging.debug("Testing??")
if (not primsInPath):
logging.debug("No intersections " + str(primsInPath))
return
startInfoPrim = InfoPathPrim.InfoPathPrim(startPrim)
finalInfoPrim = InfoPathPrim. InfoPathPrim(finalPrim)
startInfoPrim.setiPoint(startPoint)
startInfoPrim.setfPoint(primsInPath[0].iPoint)
finalInfoPrim.setiPoint(primsInPath[len(primsInPath) - 1].fPoint)
finalInfoPrim.setfPoint(finalPoint)
primsInPath.append(finalInfoPrim)
primsInPath.insert(0, startInfoPrim)
logging.debug([prim.prim.number() for prim in primsInPath])
#DEBUG:
logging.debug("Before showing path")
self.showPath(gridName, InfoPathPrim.convertListFromInfoPrimToPrim(primsInPath))
return primsInPath
def checkIntersectionWithTexture(self, points, prim):
global DEBUG
global epsilon
logging.debug("Start method checkIntersectionWithTexture, class Texture")
# First we check intersection with boundingBox
if(self.get_prim() and self.get_absolute_points()):
param_points_bounding_box = BoundingBox.BoundingBox2D(points, prim)
texture_bounding_box = BoundingBox.BoundingBox2D(
self.get_absolute_points(),
self.get_prim())
intersections = (
texture_bounding_box.intersect_bounding_box_without_limits_3D(
param_points_bounding_box))
if (not intersections):
return None, None, []
else:
if(not self.get_prim()):
logging.debug("Class Texture, not prim in method check intersection with texture")
else:
logging.debug("No object points")
logging.debug(str(self))
logging.debug(str(self.get_is_default_texture()))
logging.debug(str(self.get_absolute_points()))
logging.debug(str(self.get_absolute_points_not_erasable()))
logging.debug(str(self.get_delimited_proportions()))
logging.debug(str(self.get_obj()))
pointsIntersect = []
for n in range(len(points) - 1):
edge = [points[n], points[n + 1]]
for texIndex in range(len(self.absolutePoints)):
nextTexIndex = (texIndex + 1) % len(self.absolutePoints)
texEdge = [self.absolutePoints[texIndex], self.absolutePoints[nextTexIndex]]
pointIntersect = GeoMath.getFalseIntersectionBetweenTwoEdges3D(edge, texEdge, prim)
# We have to avoid first point, that surely intersect with some texture.
# Also avoid the case where two texture are together and pattern intersect with
# the first texture, but when 'exit' from this texture, it intersect with the
# other texture anda pattern of length 0 is used; with this method we avoid this
if(pointIntersect):
distacenToLastPoint = GeoMath.vecModul(GeoMath.vecSub(
points[len(points) - 1], pointIntersect))
if(GeoMath.vecModul(GeoMath.vecSub(pointIntersect, points[0]))
> epsilon and distacenToLastPoint > epsilon):
pointsIntersect.append(pointIntersect)
if(pointsIntersect):
nearestPointIntersect = None
# Big number
minDistance = 999999
# For each point we look if intersection is the minimum distance intersection
for pointIntersect in pointsIntersect:
distance, achieved = GeoMath.takeDistanceInTrackToPoint(points,
pointIntersect, points[0])
if(achieved and distance < minDistance and distance > epsilon):
# We need the minimun distance, but to avoid errors, we have
# to discard the first point and the last
minDistance = distance
nearestPointIntersect = pointIntersect
if(not nearestPointIntersect):
minDistance = None
else:
nearestPointIntersect = None
minDistance = None
if(nearestPointIntersect):
logging.debug('End method checkIntersectionWithTexture,'
'class Texture. State: Intersection')
else:
logging.debug('End method checkIntersectionWithTexture,'
'class Texture. State: No intersection')
return minDistance, nearestPointIntersect, pointsIntersect
def intersect_bounding_box_without_limits_3D(self, bounding_box, DISPLAY=False):
global littleEpsilon
try:
if not self.get_prim():
raise Errors.CantBeNoneError("Prim cant be none", "We need a prim to calculate tbn some steps after")
except Errors.CantBeNoneError as e:
Errors.Error.display_exception(e)
exit()
if not self.get_points_tangent_space():
self.convert_3D_to_2D(self.get_prim())
this_point_relative = self.get_tbn_class().get_point_which_is_relative()
this_tbn_inverse_matrix = self.get_tbn_class().get_tbn_inverse()
param_bounding_box_points_in_this_tangent_space = []
for point in bounding_box.get_rectangle_object_space():
point_relative = GeoMath.vecSub(point, this_point_relative)
point_tangent_space = this_tbn_inverse_matrix.mulPoint3ToMatrix3(point_relative)
param_bounding_box_points_in_this_tangent_space.append(point_tangent_space)
intersections = GeoMath.getIntersectionsBetweenEdges2D(
self.get_edges_tangent_space(), GeoMath.getEdgesFromPoints(param_bounding_box_points_in_this_tangent_space)
)
if intersections:
# ===============================================================
# Check if the limits are touching and if it are touching it,
# check if the intersection is in there. If it is in there,
# the intersection lie in the limit, so we dont consider an
# intersection
# ===============================================================
edges_shared_between_bounding_boxes = GeoMath.getEdgesBetweenEdges(
self.get_edges_tangent_space(),
GeoMath.getEdgesFromPoints(param_bounding_box_points_in_this_tangent_space),
)
inside = False
print "Edges shared between"
print edges_shared_between_bounding_boxes
for intersection in intersections:
inside = GeoMath.pointInEdges(intersection, edges_shared_between_bounding_boxes)
if not inside:
break
# ===============================================================
# If all intersections lie in the edges shared between bounding
# boxes we discart its
# ===============================================================
if inside:
intersections = []
else:
# check if intersections are in the corner, because we consider corner as limit
shared_points_between_bounding_boxes = GeoMath.getSharedPoints(
self.get_rectangle_tangent_space(), param_bounding_box_points_in_this_tangent_space
)
# If all intersections lie in the corner we doen't consider intersections as intersections
true_intersections = list(intersections)
for intersection in intersections:
for corner in shared_points_between_bounding_boxes:
if GeoMath.vecModul(GeoMath.vecSub(corner, intersection)) <= littleEpsilon:
true_intersections.remove(intersection)
break
intersections = true_intersections
if DISPLAY:
# TEMP: exit
1 / 0
exit()
for intersection in intersections:
this_tbn_matrix = self.get_tbn_class().get_tbn()
point_object_space = this_tbn_matrix.mulPoint3ToMatrix3(intersection)
point_absolute = GeoMath.vecPlus(point_object_space, this_point_relative)
self.to_display_intersections.append(point_absolute)
self.display_intersections()
return intersections
def do(self, scale=False):
# Calcule points to tbn matrix
self.calculatePoints()
# Get some arbitrary vectors conected from vertices of prim
vec1 = GeoMath.vecSub(self.get_previous_point(), self.get_point_which_is_relative())
vec2 = GeoMath.vecSub(self.get_next_point(), self.get_point_which_is_relative())
# logging.debug('Two arbitrary vec1 and vec2:' + str(vec1) + ' ' + str(vec2))
# We have to know which angle reside between the two coencted vectors, to know if suposed vectors
# in tangent space will be correct
angle = GeoMath.vecDotProduct(vec1, vec2) / (GeoMath.vecModul(vec1) * GeoMath.vecModul(vec2))
angle = math.acos(angle)
angle = math.degrees(angle)
# logging.debug('Angle between vecs:' + str(angle))
# We put relative one arbitrary point to tangent space
# logging.debug('Point relative:' + str(self.get_point_which_is_relative()))
# Determine x and y vectors, now we'll have suposed horizontal and vertical vectors acording to
# prim and direction of the crack
hasTheNormalToY = GeoMath.vecDotProduct(list(self.get_prim().normal()), [0, 1, 0])
# logging.debug('Has the normal to y?:' + str(hasTheNormalToY))
if(hasTheNormalToY < (1 - epsilon) and hasTheNormalToY > (-1 + epsilon)):
vecH, vecV = DetermineVectors.DetermineVectors.detVec(self.get_prim(), [0, 1, 0], [0, 0, 1])
# logging.debug('Yes, it has the normal to y and vecs are:' + str(vecH) + ' ' + str(vecV))
else:
vecH, vecV = DetermineVectors.DetermineVectors.detVec(self.get_prim(), [0, 0, 1], [0, 0, 1])
# logging.debug('No, it isnt has the normal to y and vecs are:' + str(vecH) + ' ' + str(vecV))
# CHAPUZA CON NUMEROS COMPLEJOS!!! Precision de python pésima, 1.000000001>1?? no! y math.acos error
cosAngle = GeoMath.vecDotProduct(vecH, vec1) / (GeoMath.vecModul(vec1) * GeoMath.vecModul(vecH))
complexAngle = cmath.acos(cosAngle)
if(complexAngle.imag == 0):
angleBetweenDetVecAndVecH = math.acos(cosAngle)
else:
if(cosAngle < 0):
angleBetweenDetVecAndVecH = math.acos(-1)
else:
angleBetweenDetVecAndVecH = math.acos(1)
# Now we have to ensure that the vec1 has the same direction that the horizontal vector, if not, we
# change and the horizontal vector will be vec2. Also we have to check if the prim is not a quad,
# in this case we have to get the vertical vector from horizontal vector, rotating the known angle
# between the two vectors conected in prim (in quad we know that the angle is 90 and we already have the
# good vectors)
if((math.fabs(angleBetweenDetVecAndVecH) < epsilon) or (math.fabs(angleBetweenDetVecAndVecH) > (math.pi - epsilon))):
if(scale):
x = GeoMath.vecScalarProduct([1, 0, 0], GeoMath.vecModul(vec1))
x = [1, 0, 0]
y = GeoMath.rotateVecByVec(x, [0, 0, 1], angle)
if(scale):
y = GeoMath.vecScalarProduct(GeoMath.vecNormalize(y), GeoMath.vecModul(vec2))
tbn = GeoMath.createTBNmatrix(self.get_previous_point(), self.get_point_which_is_relative(), self.get_next_point(), x, [0, 0], y)
else:
if(scale):
x = [1, 0, 0]
y = GeoMath.rotateVecByVec(x, [0, 0, 1], angle)
if(scale):
y = GeoMath.vecScalarProduct(GeoMath.vecNormalize(y), GeoMath.vecModul(vec1))
tbn = GeoMath.createTBNmatrix(self.get_previous_point(), self.get_point_which_is_relative(), self.get_next_point(), y, [0, 0], x)
# logging.debug('tbn: ' + str(tbn.printAttributes()))
tbnInverse = GeoMath.Matrix(3, 3)
tbnInverse.copy(tbn)
tbnInverse.matrix3Inverse()
self.set_tbn(tbn)
self.set_tbn_inverse(tbnInverse)
def add_noise(self, height, frequency, for_edge):
if(GeoMath.vecModul(self.getNormal()) > 0):
# If normal of pattern is valid
ad = Add_noise()
self.points = ad.apply_noise(self.points, self.normal, height, for_edge, frequency)
def defCrack(self, prim, Ipoint, Fpoint, texturePrim):
reload(AutoPattern)
reload(Bresenham)
reload(Data)
reload(GeoMath)
reload(HouInterface)
global epsilon
global primnumber
# TEMP: only for debug the patterns
# Size x and size y is the valor of some material with the minor wavelength(bigger pattern)
curPoint = Ipoint
self.patternCrack[prim] = []
vertices = [list(p.point().position()) for p in prim.vertices()]
print "vertices"
print vertices
# Convert prim to tangent space of patterns
# Get some arbitrary vectors conected from vertices of prim
vec1 = GeoMath.vecSub(vertices[0], vertices[1])
vec2 = GeoMath.vecSub(vertices[2], vertices[1])
# We have to know which angle reside between the two coencted vectors, to know if suposed vectors
# in tangent space will be correct
angle = GeoMath.vecDotProduct(vec1, vec2) / (GeoMath.vecModul(vec1) * GeoMath.vecModul(vec2))
angle = math.acos(angle)
angle = math.degrees(angle)
# We put relative one arbitrary point to tangent space
pointWhichIsRelative = vertices[1]
# Determine x and y vectors, now we'll have suposed horizontal and vertical vectors acording to
# prim and direction of the crack
vecH, vecV = DetermineVectors.DetermineVectors.detVec(prim, GeoMath.vecSub(Ipoint, Fpoint), [0, 0, 1])
# CHAPUZA CON NUMEROS COMPLEJOS!!! Precision de python pésima, 1.000000001>1?? no! y math.acos error
cosAngle = GeoMath.vecDotProduct(vecH, vec1) / (GeoMath.vecModul(vec1) * GeoMath.vecModul(vecH))
complexAngle = cmath.acos(cosAngle)
if(complexAngle.imag == 0):
angleBetweenDetVecAndVecH = math.acos(cosAngle)
else:
if(cosAngle < 0):
angleBetweenDetVecAndVecH = math.acos(-1)
else:
angleBetweenDetVecAndVecH = math.acos(1)
#=======================================================================
# Now we have to ensure that the vec1 has the same direction that the horizontal vector, if not, we
# change and the horizontal vector will be vec2. Also we have to check if the prim is not a quad,
# in this case we have to get the vertical vector from horizontal vector, rotating the known angle
# between the two vectors conected in prim (in quad we know that the angle is 90 and we already have the
# good vectors)
#=======================================================================
print "Create TBN"
if((math.fabs(angleBetweenDetVecAndVecH) < epsilon) or (math.fabs(angleBetweenDetVecAndVecH) > (math.pi - epsilon))):
x = GeoMath.vecScalarProduct([1, 0, 0], GeoMath.vecModul(vec1))
y = GeoMath.rotateVecByVec(x, [0, 0, 1], angle)
y = GeoMath.vecScalarProduct(GeoMath.vecNormalize(y), GeoMath.vecModul(vec2))
tbn = GeoMath.createTBNmatrix(vertices[0], vertices[1], vertices[2], x, [0, 0], y)
else:
x = GeoMath.vecScalarProduct([1, 0, 0], GeoMath.vecModul(vec2))
y = GeoMath.rotateVecByVec(x, [0, 0, 1], angle)
y = GeoMath.vecScalarProduct(GeoMath.vecNormalize(y), GeoMath.vecModul(vec1))
tbn = GeoMath.createTBNmatrix(vertices[0], vertices[1], vertices[2], y, [0, 0], x)
print "Edn create tbn"
tbnInverse = GeoMath.Matrix(3, 3)
tbnInverse.copy(tbn)
tbnInverse.matrix3Inverse()
# Get the first material:
print "texture get first layer"
texture = texturePrim.getFirstLayer(Ipoint)
nextMaterial = texture.get_material()
print "end get material"
# Create status of the process to show to the user
distance_to_complete = GeoMath.vecModul(GeoMath.vecSub(curPoint, Fpoint))
ui_process_status = UIProcessStatus.UIProcessStatus('crack for prim',
distance_to_complete)
while(GeoMath.vecModul(GeoMath.vecSub(curPoint, Fpoint)) > epsilon):
# Print status of the process
dist = GeoMath.vecModul(GeoMath.vecSub(curPoint, Fpoint))
ui_process_status.calculate_status(dist, inverse=True)
ui_process_status.print_status()
genPattern = Data.GeneralPattern()
for wavelength in nextMaterial.mat.keys():
singleMat = nextMaterial.mat[wavelength]
setOfTypeOfPattern = CDF.cdf([[singleMat.classesAndPercentage[k], k] for k in singleMat.classesAndPercentage.keys()])
if(wavelength == 0):
nextPoint = Bresenham.Bresenham.bresenham(Ipoint, curPoint, Fpoint, setOfTypeOfPattern.getSizex(), setOfTypeOfPattern.getSizey(), prim, [1, 0, 0])
pat = AutoPattern.AutoPattern(curPoint, nextPoint, setOfTypeOfPattern, prim, wavelength, self.patternCrack, tbn, tbnInverse, pointWhichIsRelative, texture, texturePrim).pattern
genPattern.applyPattern(pat, wavelength)
# Check texture
previousTexture = texture
pii, texture = self.checkTexture(texturePrim, previousTexture, genPattern, Fpoint, nextPoint)
logging.debug('Pii defcrack: ' + str(pii))
logging.debug('CurPoint defcrack: ' + str(curPoint))
logging.debug('genPattern ' + str(genPattern.getPoints()))
'''
if(not curPoint):
curPoint=genPattern.getLastPoint()
'''
curPoint = genPattern.getLastPoint()
if(texture):
nextMaterial = texture.get_material()
else:
if(not (GeoMath.vecModul(GeoMath.vecSub(curPoint, Fpoint)) > epsilon)):
logging.error('Texture no matched, previous texture applied')
# version 4
self.patternCrack[prim].append(genPattern)
def checkIntersectionWithTexture(self, points, prim):
global DEBUG
global epsilon
logging.debug(
"Start method checkIntersectionWithTexture, class Texture")
# First we check intersection with boundingBox
if (self.get_prim() and self.get_absolute_points()):
param_points_bounding_box = BoundingBox.BoundingBox2D(points, prim)
texture_bounding_box = BoundingBox.BoundingBox2D(
self.get_absolute_points(), self.get_prim())
intersections = (
texture_bounding_box.intersect_bounding_box_without_limits_3D(
param_points_bounding_box))
if (not intersections):
return None, None, []
else:
if (not self.get_prim()):
logging.debug(
"Class Texture, not prim in method check intersection with texture"
)
else:
logging.debug("No object points")
logging.debug(str(self))
logging.debug(str(self.get_is_default_texture()))
logging.debug(str(self.get_absolute_points()))
logging.debug(str(self.get_absolute_points_not_erasable()))
logging.debug(str(self.get_delimited_proportions()))
logging.debug(str(self.get_obj()))
pointsIntersect = []
for n in range(len(points) - 1):
edge = [points[n], points[n + 1]]
for texIndex in range(len(self.absolutePoints)):
nextTexIndex = (texIndex + 1) % len(self.absolutePoints)
texEdge = [
self.absolutePoints[texIndex],
self.absolutePoints[nextTexIndex]
]
pointIntersect = GeoMath.getFalseIntersectionBetweenTwoEdges3D(
edge, texEdge, prim)
# We have to avoid first point, that surely intersect with some texture.
# Also avoid the case where two texture are together and pattern intersect with
# the first texture, but when 'exit' from this texture, it intersect with the
# other texture anda pattern of length 0 is used; with this method we avoid this
if (pointIntersect):
distacenToLastPoint = GeoMath.vecModul(
GeoMath.vecSub(points[len(points) - 1],
pointIntersect))
if (GeoMath.vecModul(
GeoMath.vecSub(pointIntersect, points[0])) >
epsilon and distacenToLastPoint > epsilon):
pointsIntersect.append(pointIntersect)
if (pointsIntersect):
nearestPointIntersect = None
# Big number
minDistance = 999999
# For each point we look if intersection is the minimum distance intersection
for pointIntersect in pointsIntersect:
distance, achieved = GeoMath.takeDistanceInTrackToPoint(
points, pointIntersect, points[0])
if (achieved and distance < minDistance
and distance > epsilon):
# We need the minimun distance, but to avoid errors, we have
# to discard the first point and the last
minDistance = distance
nearestPointIntersect = pointIntersect
if (not nearestPointIntersect):
minDistance = None
else:
nearestPointIntersect = None
minDistance = None
if (nearestPointIntersect):
logging.debug('End method checkIntersectionWithTexture,'
'class Texture. State: Intersection')
else:
logging.debug('End method checkIntersectionWithTexture,'
'class Texture. State: No intersection')
return minDistance, nearestPointIntersect, pointsIntersect
def find_path(self, gridName, startPoint, finalPoint):
reload(GeoMath)
path = []
grid = self.hout.grids[gridName][0]
logging.debug('grid name ' + str(grid))
prims = grid.geometry().prims()
startPrim, finalPrim = self.findExtremePrims(startPoint, finalPoint,
prims)
if (startPrim == None or finalPrim == None):
logging.debug(
"Start and final prims can't be ensured since the intersections_with_crack with the crack are a little misplaced, and that cause pointInEdge to fail when trying to know which primitive is the start and the final"
)
# Unique prim
if (finalPrim.number() == startPrim.number()):
uniquePrim = InfoPathPrim.InfoPathPrim(startPrim)
uniquePrim.setiPoint(startPoint)
uniquePrim.setfPoint(finalPoint)
return [uniquePrim]
logging.debug(
"prims with floor " +
str([startPrim.number(), finalPrim.number()]))
navigationLine = GeoMath.vecSub(finalPoint, startPoint)
mappedStartPoint = [startPoint[0], startPoint[2], 0]
mappedFinalPoint = [finalPoint[0], finalPoint[2], 0]
primsInPath = []
for prim in prims:
if (prim.number() == startPrim.number()
or prim.number() == finalPrim.number()):
continue
edges = GeoMath.getEdgesFromPrim(prim)
mappedEdges = [[[edge[0][0], edge[0][2], 0],
[edge[1][0], edge[1][2], 0]] for edge in edges]
logging.debug("prim number " + str(prim.number()))
inters = GeoMath.getIntersectionsBetweenEdges2D(
mappedEdges, [[mappedStartPoint, mappedFinalPoint]])
if (inters):
logging.debug("Inter in path " + str(inters))
# Demap again to original 'y' component, which both start point or
# final point have
demappedInters = [[inter[0], startPoint[1], inter[1]]
for inter in inters]
distPoint0 = GeoMath.vecModul(
GeoMath.vecSub(demappedInters[0], startPoint))
distPoint1 = GeoMath.vecModul(
GeoMath.vecSub(demappedInters[1], startPoint))
if (distPoint0 < distPoint1):
startPrimPoint = demappedInters[0]
finalPrimPoint = demappedInters[1]
else:
startPrimPoint = demappedInters[1]
finalPrimPoint = demappedInters[0]
infoPrim = InfoPathPrim.InfoPathPrim(prim)
infoPrim.setiPoint(startPrimPoint)
infoPrim.setfPoint(finalPrimPoint)
primsInPath.append(infoPrim)
logging.debug("Prim intersects " + str(prim.number()) + " " +
str(startPrimPoint) + " " + str(finalPrimPoint))
sorted(primsInPath,
key=lambda infoPrim: GeoMath.vecModul(
GeoMath.vecSub(infoPrim.iPoint, startPoint)))
logging.debug("Testing??")
if (not primsInPath):
logging.debug("No intersections " + str(primsInPath))
return
startInfoPrim = InfoPathPrim.InfoPathPrim(startPrim)
finalInfoPrim = InfoPathPrim.InfoPathPrim(finalPrim)
startInfoPrim.setiPoint(startPoint)
startInfoPrim.setfPoint(primsInPath[0].iPoint)
finalInfoPrim.setiPoint(primsInPath[len(primsInPath) - 1].fPoint)
finalInfoPrim.setfPoint(finalPoint)
primsInPath.append(finalInfoPrim)
primsInPath.insert(0, startInfoPrim)
logging.debug([prim.prim.number() for prim in primsInPath])
#DEBUG:
logging.debug("Before showing path")
self.showPath(gridName,
InfoPathPrim.convertListFromInfoPrimToPrim(primsInPath))
return primsInPath
def intersect_bounding_box_without_limits_3D(self,
bounding_box,
DISPLAY=False):
global littleEpsilon
try:
if (not self.get_prim()):
raise Errors.CantBeNoneError(
'Prim cant be none',
'We need a prim to calculate tbn some steps after')
except Errors.CantBeNoneError as e:
Errors.Error.display_exception(e)
exit()
if (not self.get_points_tangent_space()):
self.convert_3D_to_2D(self.get_prim())
this_point_relative = self.get_tbn_class().get_point_which_is_relative(
)
this_tbn_inverse_matrix = self.get_tbn_class().get_tbn_inverse()
param_bounding_box_points_in_this_tangent_space = []
for point in bounding_box.get_rectangle_object_space():
point_relative = GeoMath.vecSub(point, this_point_relative)
point_tangent_space = this_tbn_inverse_matrix.mulPoint3ToMatrix3(
point_relative)
param_bounding_box_points_in_this_tangent_space.append(
point_tangent_space)
intersections = GeoMath.getIntersectionsBetweenEdges2D(self.get_edges_tangent_space(), \
GeoMath.getEdgesFromPoints(param_bounding_box_points_in_this_tangent_space))
if (intersections):
#===============================================================
# Check if the limits are touching and if it are touching it,
# check if the intersection is in there. If it is in there,
# the intersection lie in the limit, so we dont consider an
# intersection
#===============================================================
edges_shared_between_bounding_boxes = \
GeoMath.getEdgesBetweenEdges(self.get_edges_tangent_space(), \
GeoMath.getEdgesFromPoints(param_bounding_box_points_in_this_tangent_space))
inside = False
print "Edges shared between"
print edges_shared_between_bounding_boxes
for intersection in intersections:
inside = GeoMath.pointInEdges(
intersection, edges_shared_between_bounding_boxes)
if (not inside):
break
#===============================================================
# If all intersections lie in the edges shared between bounding
# boxes we discart its
#===============================================================
if (inside):
intersections = []
else:
# check if intersections are in the corner, because we consider corner as limit
shared_points_between_bounding_boxes = GeoMath.getSharedPoints(
self.get_rectangle_tangent_space(),
param_bounding_box_points_in_this_tangent_space)
# If all intersections lie in the corner we doen't consider intersections as intersections
true_intersections = list(intersections)
for intersection in intersections:
for corner in shared_points_between_bounding_boxes:
if (GeoMath.vecModul(
GeoMath.vecSub(corner, intersection)) <=
littleEpsilon):
true_intersections.remove(intersection)
break
intersections = true_intersections
if (DISPLAY):
# TEMP: exit
1 / 0
exit()
for intersection in intersections:
this_tbn_matrix = self.get_tbn_class().get_tbn()
point_object_space = this_tbn_matrix.mulPoint3ToMatrix3(
intersection)
point_absolute = GeoMath.vecPlus(point_object_space,
this_point_relative)
self.to_display_intersections.append(point_absolute)
self.display_intersections()
return intersections