def exp_fits(x,x0,xend,t_res):
"""
fits an exponential signal increase starting from x0 to xend, optionally with an exponential washout term of the contrast agent.
output contains various parameters computed from the fit
"""
# model = ExpressionModel('B*(1 - exp(-ktrans * (x)))')
model = ExpressionModel('B*(1 - exp(-ktrans * (x))) * exp(-w * x)', nan_policy='propagate') # with washout
params = model.make_params()
params['ktrans'].set(value=0.001,min=0.0001, max=0.1)
params['B'].set(value=0.1, min=0.01, max=50)
params['w'].set(value=0.0001,min=0, max=0.001)
signal = x[x0:xend]-x[x0]
time = np.arange(0, signal.size, 1)*t_res
result = model.fit(signal, params, x=time)
slope = result.best_values['B']*result.best_values['ktrans'] #derivative of model function at point x=0
# integral = np.sum(result.best_fit)
maximum = np.max(result.best_fit)
TTP = np.argmax(result.best_fit) * t_res
return result, slope, maximum, TTP, signal, time
def CreateModel(stim_events):
'''
creates lmfit model object with a gamma variate at every stimulus timepoint.
parameter values seem to work well both for neurons and astrocytes
(in case of astrocyte/isoflurane the first gamma variate will just cover the whole time course and all others get almost zero amplitude)
'''
script = """
def gammavar(ymax, tmax, a, x, t0):
x_input = x * (x > t0) + (t0 + tmax) * (x <= t0)
return (exp(log(ymax)+a*(1+log((x_input-t0)/tmax)-(x_input-t0)/tmax))) * (x > t0)
"""
model = ExpressionModel(f'gammavar(ymax0, tmax0, a0, x, 0.02)',
init_script=script,
intependent_vars=['x'])
k = 1
for i in stim_events[1:]:
model += ExpressionModel(f'gammavar(ymax{k}, tmax{k}, a{k}, x, {i})',
init_script=script,
intependent_vars=['x'])
k += 1
params = model.make_params()
params['ymax0'].set(value=1, min=0.002, max=10)
params['tmax0'].set(value=2, min=0.1, max=8)
params['a0'].set(1, min=0.05, max=5)
for i in range(1, len(stim_events)):
params[f'tmax{i}'].set(expr='tmax0')
params[f'a{i}'].set(expr='a0')
params[f'ymax{i}'].set(0.8, min=0.002, max=10)
return model, params
def PeakDecom(x, y):
print("***Peak Fitting......")
x = np.array(x)
x = x.tolist()
y = np.array(y)
cen = min(x)
Gmod = ExpressionModel(
"amp * exp(-(x-cen)**2 /(2*wid**2))/(sqrt(2*pi)*wid)")
result = Gmod.fit(y, x=x, amp=1, cen=cen, wid=0.5)
print(result.fit_report())
plt.figure(dpi=600, figsize=(8, 6))
plt.plot(x, y, 'C2.', label='Net Signal')
plt.plot(x, result.best_fit, 'C3-', label='Gaussian fitting')
plt.legend(loc='best', fontsize=16)
plt.xlabel("Temperature (℃)", size=22, labelpad=10)
plt.ylabel("Heat capacity (KJ/mol/K)", size=22, labelpad=10)
plt.tick_params(labelsize=16)
plt.show()
GauBestFit = result.best_fit
# RMSE
Rmse = RMSE(y, GauBestFit)
print("RMSE = ", Rmse)
# Enthalpy change of Gaussian fitting
print(" Enthalpy change of Gaussian fitting 1:", simps(GauBestFit, x))
def model_decay_curve(dfout, Column):
''' This function models the decay curve for core, and new genes'''
# Model the Core gene curve using an Exponential Decay Function:
# Fc = Kc*exp(-N/τc) + Ω
print(f'\n\nFitting Exponential Decay function to {Column}')
print('Using Exponential Decay Function: K*exp-(N/\u03C4) + \u03A9')
# Initialize model
Custom_Exponential = ExpressionModel(
'A * exp(-x/tau) + omega',
independent_vars=['x']
)
# Initialize custom parameters
Expression_Params = Custom_Exponential.make_params()
# add params with tuples: (NAME VALUE VARY MIN MAX EXPR BRUTE_STEP)
Expression_Params.add_many(
('A', 5, True, 0, None, None, 0.1),
('tau', 5, True, 0, None, None, 0.1),
('omega', 5, True, 0, None, None, 0.1)
)
EDM_Fit = Custom_Exponential.fit(
dfout[Column],
Expression_Params,
x=dfout['n']
)
dfout[f'{Column}_EDM'] = EDM_Fit.best_fit
omega = EDM_Fit.best_values['omega']
return dfout, omega
def exponential_fit_offset(x, y, amp_guess=1, decay_guess=1, offset_guess=0, errors=True):
"""
Simple helper function that speeds up single exponetial fit with offset. Uses lmfit
Parameters
----------
x, y (float)
Sample length x, y arrays of data to be fitted
Returns
-------
Returns slope and intercept, with uncertainties (use uncertainties package if availabe)
!!!!!
not tested or working
!!!!!
"""
from lmfit.models import ExpressionModel
mod = ExpressionModel("offset + amp * exp(-x/decay)")
par = mod.make_params(amp=amp_guess, decay=decay_guess, offset_guess=offset_guess)
out = mod.fit(y, params=par, x=x)
s = out.params['slope']
i = out.params['intercept']
if errors:
try:
from uncertainties import ufloat
return ufloat(s.value, s.stderr), ufloat(i.value, i.stderr)
except:
return s.value, s.stderr, i.value, i.stderr
else:
return s.value, i.value
def test_saveload_modelresult_expression_model():
"""Test for ModelResult.loads()/dumps() for ExpressionModel.
* make sure that the loaded ModelResult has `init_params` and `init_fit`.
"""
savefile = 'expr_modres.txt'
x = np.linspace(-10, 10, 201)
amp, cen, wid = 3.4, 1.8, 0.5
y = amp * np.exp(-(x - cen)**2 / (2 * wid**2)) / (np.sqrt(2 * np.pi) * wid)
y = y + np.random.normal(size=x.size, scale=0.01)
gmod = ExpressionModel(
"amp * exp(-(x-cen)**2 /(2*wid**2))/(sqrt(2*pi)*wid)")
result = gmod.fit(y, x=x, amp=5, cen=5, wid=1)
save_modelresult(result, savefile)
time.sleep(0.25)
result2 = load_modelresult(savefile)
assert result2 is not None
assert result2.init_fit is not None
assert_allclose((result2.init_fit - result.init_fit).sum() + 1.00,
1.00,
rtol=1.0e-2)
os.unlink(savefile)
def findEfermiByArcTan(energy, intensity):
"""
Searches Efermi energy by fitting xanes by arctan.
:param energy:
:param intensity:
:return: best_params = {'a':..., 'x0':...}, arctan_y
"""
assert len(energy) == len(
intensity), f'{len(energy)} != {len(intensity)} ' + str(
energy.shape) + ' ' + str(intensity.shape)
last = np.mean(intensity[-5:])
efermi0, _, _ = findExpEfermi(energy, intensity, 0.5 * last)
mod = ExpressionModel('b/(1+exp(-a*(x - x0)))+c')
params = mod.make_params(a=0.3, x0=efermi0, b=last, c=0) # - стартовые
params['a'].set(min=0)
params['b'].set(min=0)
result = mod.fit(intensity, params, x=energy)
return result.best_values, result.best_fit
def CreateModel_simple(stim_events):
script = """
def gammavar(ymax, tmax, a, x, t0):
x_input = x * (x > t0) + (t0 + tmax) * (x <= t0)
return (exp(log(ymax)+a*(1+log((x_input-t0)/tmax)-(x_input-t0)/tmax))) * (x > t0)
"""
model = ExpressionModel(f'gammavar(ymax0, tmax0, a0, x, 0.02)',
init_script=script,
intependent_vars=['x'])
params = model.make_params()
params['ymax0'].set(value=1, min=0.002, max=10)
params['tmax0'].set(value=2, min=0.1, max=20)
params['a0'].set(1, min=0.05, max=5)
return model, params
def exponential_fit_offset(
x, y, amp_guess=1, decay_guess=1, offset_guess=0, errors=True
):
"""
Simple helper function that speeds up single exponetial fit with offset. Uses lmfit
Parameters
----------
x, y (float)
Sample length x, y arrays of data to be fitted
Returns
-------
Returns slope and intercept, with uncertainties (use uncertainties package if availabe)
!!!!!
not tested or working
!!!!!
"""
from lmfit.models import ExpressionModel
mod = ExpressionModel("offset + amp * exp(-x/decay)")
par = mod.make_params(amp=amp_guess, decay=decay_guess, offset_guess=offset_guess)
out = mod.fit(y, params=par, x=x)
s = out.params["slope"]
i = out.params["intercept"]
if errors:
try:
from uncertainties import ufloat
return ufloat(s.value, s.stderr), ufloat(i.value, i.stderr)
except:
return s.value, s.stderr, i.value, i.stderr
else:
return s.value, i.value
def expression_model(model_exp):
"""
This function creates a Model from a user-supplied expression.
Parameters
----------
model_exp : str
expression of the model
Returns
-------
mod : array_like
object of fitting results
"""
mod = ExpressionModel(model_exp)
return mod
from lmfit import minimize, Parameters, Minimizer, printfuncs, conf_interval
import lmfit
from lmfit.models import GaussianModel, PolynomialModel, VoigtModel, LorentzianModel, ExpressionModel, StepModel
import numpy as np
import matplotlib.pyplot as plt
from scipy.ndimage import minimum_filter, median_filter
#def box_lmfit(pars, x, p):
# height, center, width = p
# return height*(center-width/2 < x)*(x < center+width/2)
box_model = ExpressionModel(
'height*(center-width/2 < x)*(x < center+width/2) + off')
def fit_box_to_step_function(
y,
initial_guess,
x=None,
):
# Create the x axis if needed
if x is None: x = np.arange(y.shape[0])
# Create the parameters
params = Parameters()
params.add('height', value=initial_guess[0], min=0)
params.add('center', value=initial_guess[1], min=np.min(x), max=np.max(x))
params.add('width',
value=initial_guess[2],
min=1e-3,
max=0.5 * (np.max(x) - np.min(x)))
def substractBase(x,
y,
peakInterval,
baseFitInterval,
model,
usePositiveConstrains,
extrapolate=None,
useStartParams=None):
"""
Fit base by Cauchy function and substract from y.
:param x: argument
:param y: function values
:param peakInterval: interval of peak search (do not included in base fitting)
:param baseFitInterval: interval of base fit. Usually it includes peakInterval
:param model: 'cauchy' or 'bezier' or 'arctan'
:param usePositiveConstrains: add constrain y_base <= y
:param extrapolate: {'left':percent_dx_left, 'right':percent_dx_right}
:return: x_peak, y_sub - peak with substracted base (on interval peakInterval); x_base, y_base - base on baseFitInterval; y_peak - peak part of original func; y_sub_full - y_sub expanded to baseFitInterval
"""
assert model in ['cauchy', 'bezier', 'arctan']
assert len(x) == len(y)
if extrapolate is None: extrapolate = {}
ind_peak = (x >= peakInterval[0]) & (x <= peakInterval[1])
ind_base_full = (x >= baseFitInterval[0]) & (x <= baseFitInterval[1])
ind_base = ind_base_full & ~ind_peak
x_peak = x[ind_peak]
y_peak = y[ind_peak]
x_base = x[ind_base]
y_base = y[ind_base]
x_base_full = x[ind_base_full]
y_base_full = y[ind_base_full]
# make x_fit y_fit by extrapolating base inside peak interval (linear extrapolation from both ends)
if usePositiveConstrains:
ind_base_left = (x < peakInterval[0]) & ind_base_full
b1, a1 = linearReg(x[ind_base_left], y[ind_base_left])
ind_base_right = (x > peakInterval[1]) & ind_base_full
b2, a2 = linearReg(x[ind_base_right], y[ind_base_right])
y_gap = np.max([a1 * x_peak + b1, a2 * x_peak + b2],
axis=0).reshape(-1)
assert len(y_gap) == len(x_peak)
x_fit = x_base_full
y_fit = np.concatenate((y[ind_base_left], y_gap, y[ind_base_right]))
assert len(x_fit) == len(y_fit), str(len(x_fit)) + " " + str(
len(y_fit))
else:
x_fit = x_base
y_fit = y_base
x1 = x_base[0]
x2 = x_base[-1]
y1 = y_base[0]
y2 = y_base[-1]
if 'left' in extrapolate:
n = np.where(x_base <= x1 + (x2 - x1) / 10)[0][-1] + 1
if n < 2: n = 2
slope, intercept, _, _, _ = scipy.stats.linregress(
x_base[:n], y_base[:n])
percent = extrapolate['left']
count = np.round(len(x_base) * percent)
first = x1 - (x2 - x1) * percent
last = x1 - (x2 - x1) / count
new_x = np.linspace(first, last, count)
x_base = np.insert(x_base, 0, new_x)
y_base = np.insert(y_base, 0, new_x * slope + intercept)
if 'right' in extrapolate:
n = np.where(x_base >= x2 - (x2 - x1) / 10)[0][-1] + 1
if n < 2: n = 2
slope, intercept, _, _, _ = scipy.stats.linregress(
x_base[-n:], y_base[-n:])
percent = extrapolate['right']
count = np.round(len(x_base) * percent)
last = x2 + (x2 - x1) * percent
first = x2 + (x2 - x1) / count
new_x = np.linspace(first, last, count)
x_base = np.append(x_base, new_x)
y_base = np.append(y_base, new_x * slope + intercept)
assert (len(x_peak) >= 2) and (len(x_base) >= 2), 'len(x_peak) = ' + str(
len(x_peak)) + ' len(x_base) = ' + str(len(x_base))
minx = np.min(x)
maxx = np.max(x)
maxy = np.max(y)
if model == 'cauchy':
fff = lambda x, a, b, g, d: a / ((x - b)**2 + g) + d
mod = ExpressionModel('a/((x-b)**2+g) + d')
b0 = x2 + x2 - x1
g0 = 1
a0 = (y2 - y1) / (1 / ((x2 - b0)**2 + g0) - 1 / ((x1 - b0)**2 + g0))
d0 = y1 - a0 / ((x1 - b0)**2 + g0)
params = mod.make_params(a=a0, b=b0, g=g0, d=d0)
param_order = {'a': 0, 'b': 1, 'g': 2, 'd': 3}
start0 = [
params['a'].value, params['b'].value, params['g'].value,
params['d'].value
]
result = mod.fit(y_fit, params, x=x_fit)
start = [
result.params['a'].value, result.params['b'].value,
result.params['g'].value, result.params['d'].value
]
bounds = [[0, 1e3 * maxy], [minx, maxx + (maxx - minx) * 10],
[0, (maxx - minx) * 10], [-maxy, maxy]]
elif model == 'arctan':
fff = lambda x, a, b, c, x0, d: b / (1 + np.exp(-a * (x - x0))
) + c + d * (x - x_base[0])
mod = ExpressionModel('b/(1+exp(-a*(x - x0)))+c+d*(x-' +
str(x_base[0]) + ')')
efermi0, _, _ = findExpEfermi(x, y, 0.5 * np.mean(y[-5:]))
if efermi0 < x_peak[0]: efermi0 = x_peak[0]
a0 = 1
b0 = y[-1] - y[0]
c0 = y[0]
x00 = efermi0
d0 = (y_peak[0] - y_base[0]) / (x_peak[0] - x_base[0])
params = mod.make_params(a=a0, b=b0, c=c0, x0=x00, d=d0)
param_order = {'a': 0, 'b': 1, 'c': 2, 'x0': 3, 'd': 4}
start0 = [
params['a'].value, params['b'].value, params['c'].value,
params['x0'].value, params['d'].value
]
assert np.all(x[1:] - x[:-1] > 0), str(x)
max_dy = np.max((y[1:] - y[:-1]) / (x[1:] - x[:-1]))
params['a'].set(min=0)
params['a'].set(max=max_dy / (np.max(y) - np.min(y)) * 10)
params['b'].set(min=0)
params['x0'].set(min=x_peak[0])
params['d'].set(min=0)
params['d'].set(max=3 * (y_peak[0] - y_base[0]) /
(x_peak[0] - x_base[0]))
dist = np.max([abs(x00 - minx), abs(x00 - maxx), maxx - minx])
bounds = [[0, a0 * 100], [0, maxy * 10], [-maxy, maxy],
[minx - dist, maxx + dist * 10],
[0, 3 * (y_peak[0] - y_base[0]) / (x_peak[0] - x_base[0])]]
# TODO: remove lmfit, because scipy.optimize.minimize works better
if useStartParams is None:
result = mod.fit(y_fit, params, x=x_fit)
# result.plot()
# plt.show()
# print(result.fit_report())
start = [
result.params['a'].value, result.params['b'].value,
result.params['c'].value, result.params['x0'].value,
result.params['d'].value
]
else:
start = useStartParams
else:
Mtk = lambda n, t, k: t**k * (1 - t)**(n - k) * scipy.misc.comb(n, k)
BezierCoeff = lambda ts: [[Mtk(3, t, k) for k in range(4)] for t in ts]
t = np.linspace(0, 1, len(x_base))
Pseudoinverse = np.linalg.pinv(BezierCoeff(t))
data = np.column_stack((x_base, y_base))
control_points = Pseudoinverse.dot(data)
Bezier = np.array(BezierCoeff(tPlot)).dot(control_points)
assert not usePositiveConstrains
return x_peak, y_peak - app_y_base_inside_peak, x_base_full, app_y_base_full, y_peak, y_base_full - app_y_base_full
def func(params):
y_app = fff(x_base, *params)
return np.linalg.norm(y_app - y_base)
if useStartParams is None:
res = scipy.optimize.minimize(func, start0, bounds=bounds)
# print(func(start), res.fun)
if res.fun < func(start):
for name in result.params:
# print(f'Setting {name} = ',res.x[param_order[name]])
result.params[name].set(res.x[param_order[name]])
# print(result.params)
start = res.x
info = {'optimParam': start, 'optimVal': func(start)}
if usePositiveConstrains:
#while True:
#if np.all(fff(x_peak,*start)<=y_peak): break
#dx = np.max(x_peak)-np.min(x_peak)
#dy = np.max(y_peak)-np.min(y_peak)
#start[1] += dx*0.01
#start[3] -= dy*0.01
constrains = tuple()
for i in range(len(x_peak)):
cons_fun = lambda params, i=i: fff(x_peak[i], *params)
constrains += (scipy.optimize.NonlinearConstraint(
cons_fun, -maxy, y_peak[i]), )
# print(bounds)
res = scipy.optimize.minimize(func,
start,
bounds=bounds,
constraints=constrains)
params = res.x
app_y_base_inside_peak = fff(x_peak, *params)
app_y_base_full = fff(x_base_full, *params)
info = {'optimParam': params, 'optimVal': res.fun}
else:
app_y_base_inside_peak = mod.eval(result.params, x=x_peak)
app_y_base_full = mod.eval(result.params, x=x_base_full)
return x_peak, y_peak - app_y_base_inside_peak, x_base_full, app_y_base_full, y_peak, y_base_full - app_y_base_full, info
#!/usr/bin/env python
import numpy as np
import matplotlib.pyplot as plt
from lmfit.models import ExpressionModel
x = np.linspace(-10, 10, 201)
amp, cen, wid = 3.4, 1.8, 0.5
y = amp * np.exp(-(x-cen)**2 / (2*wid**2)) / (np.sqrt(2*np.pi)*wid)
y = y + np.random.normal(size=len(x), scale=0.01)
gmod = ExpressionModel("amp * exp(-(x-cen)**2 /(2*wid**2))/(sqrt(2*pi)*wid)")
result = gmod.fit(y, x=x, amp=5, cen=5, wid=1)
print(result.fit_report())
plt.plot(x, y, 'bo')
plt.plot(x, result.init_fit, 'k--')
plt.plot(x, result.best_fit, 'r-')
plt.show()
"""
Created on Tue Jan 14 13:36:36 2020
@author: miseminger
"""
import matplotlib.pyplot as plt
import numpy as np
from lmfit.models import ExpressionModel
x = np.array([0, 1.25, 2.5, 5, 10, 20]) #protein concentration (nM)
y = np.array([0.1475, 0.334, 0.444, 0.532, 0.598, 0.6615]) #mean absorbance
y_err = np.array([0.0175, 0.003, 0.013, 0.003, 0.013,
0.0235]) #standard error of the mean
fit_model = ExpressionModel('B * x**h / (Kd**h + x**h)',
independent_vars=['x']) #Hill function
params = fit_model.make_params(B=0.7, h=0.8,
Kd=1.6) #include guesses for parameters
params['B'].min = 0.5 #set minimum values for parameters
params['h'].min = 0.5
params['Kd'].min = 1
result = fit_model.fit(y, params, x=x, weights=1.0 / y_err)
print(result.fit_report())
#plot
x_mod = np.linspace(0, 25, num=1000)
B_best = result.params['B'].value
h_best = result.params['h'].value
#!/usr/bin/env python
import numpy as np
from lmfit.models import ExpressionModel
try:
import matplotlib.pyplot as plt
HAS_PYLAB = True
except ImportError:
HAS_PYLAB = False
x = np.linspace(-10, 10, 201)
amp, cen, wid = 3.4, 1.8, 0.5
y = amp * np.exp(-(x-cen)**2 / (2*wid**2)) / (np.sqrt(2*np.pi)*wid)
y = y + np.random.normal(size=len(x), scale=0.01)
gmod = ExpressionModel("amp * exp(-(x-cen)**2 /(2*wid**2))/(sqrt(2*pi)*wid)")
result = gmod.fit(y, x=x, amp=5, cen=5, wid=1)
print(result.fit_report())
if HAS_PYLAB:
plt.plot(x, y, 'bo')
plt.plot(x, result.init_fit, 'k--')
plt.plot(x, result.best_fit, 'r-')
plt.show()
import matplotlib.pyplot as plt
import numpy as np
from lmfit.models import ExpressionModel
# Number of frames
nf = [2000, 1500, 1000, 500]
time = [6534.59, 4871.85, 3282.48, 1682.1186]
# Fitting
gmod = ExpressionModel("a*x +b")
result = gmod.fit(time, x=nf, a=10, b=0)
# Prediction
x = np.arange(0, 20000, 500)
y = gmod.eval(result.params, x=x)
print(result.params)
print(result.best_fit)
print(result.best_values)
print(result.fit_report())
test_nf = 200000
test_time = gmod.eval(result.params, x=test_nf)
print('{0:d} frames taks {1:f} s ({2:f} hours to finish)'.format(
test_nf, test_time, test_time / 3600.0))
plt.plot(x, y, '.-')
plt.plot(nf, time, '*')
plt.show()
def ground_state():
masses = list()
#this reads in the params of the run
#list_of_files = glob.glob('./Data/*.dat') # create the list of file
list_of_files = glob.glob('*.dat')
for file_name in list_of_files:
print(file_name)
f = open(file_name, 'r')
#f = open('test.dat', 'r')
params = f.readline()
params = list(params.split())
params = list(map(int,params))
f.close()
Nconf = params[0]
Nt = params[1]
eof = Nconf*Nt
numeffs = Nt-1
corr = np.loadtxt(file_name,skiprows=1) # read in correlator data
jack = list()
jackerr = list()
jackavg = list()
#it = t-1;
for i in range(Nt):
tmp = list(corr[i:eof:Nt,1])
err, avg, jkl = jackknife_err(tmp)
jack.append(jkl)
jackerr.append(err)
jackavg.append(avg)
Cavg = np.array(jackavg)
Cerr = np.array(jackerr)
tmin,tmax = 12 , Nt//2
times = np.arange(tmin,tmax)
x = times
mod = ExpressionModel('A1 * exp(-m1*x)')# note 'x' is the default independent variable in lmfit
# lmfit is smart with the ExpressionModel function to be able to determine
# the fit parameters, A1 and m1.
params = mod.make_params(A1=1., m1=0.3)
dof = x.shape[0] - len(params)
out = mod.fit(Cavg[tmin:tmax], params, x=times, weights=Cerr[tmin:tmax])
print(out.fit_report())
plt.errorbar(x,Cavg[tmin:tmax], Cerr[tmin:tmax],fmt='b.')
plt.scatter(x,Cavg[tmin:tmax])
plt.plot(x, out.best_fit, 'r-')
plt.show()
def first_excited_state():
masses = list()
#this reads in the params of the run
#list_of_files = glob.glob('./Data/*.dat') # create the list of file
list_of_files = glob.glob('*.dat')
for file_name in list_of_files:
print(file_name)
f = open(file_name, 'r')
params = f.readline()
params = list(params.split())
params = list(map(int,params))
f.close()
Nconf = params[0]
Nt = params[1]
eof = Nconf*Nt
numeffs = Nt-1
corr = np.loadtxt(file_name,skiprows=1) # read in correlator data
jack = list()
jackerr = list()
jackavg = list()
#it = t-1;
for i in range(Nt):
tmp = list(corr[i:eof:Nt,1])
err, avg, jkl = jackknife_err(tmp)
jack.append(jkl)
jackerr.append(err)
jackavg.append(avg)
Cavg = np.array(jackavg)
Cerr = np.array(jackerr)
sigma = sigma_mat(Nconf, Nt, Cavg, corr)
tmin,tmax = 12, Nt//2
times = np.arange(tmin,tmax)
x = times
mod = ExpressionModel('A1 * exp(-m1*x) + A2 * exp(-m2*x)')
params = mod.make_params(A1=1., A2=1., m1=0.3, m2=0.6)
dof = x.shape[0] - len(params)
out = mod.fit(Cavg[tmin:tmax], params, x=times, weights=Cerr[tmin:tmax])
print(out.fit_report())
plt.errorbar(x,Cavg[tmin:tmax], np.diag(np.sqrt(sigma[tmin:tmax,tmin:tmax])),fmt='b.')
plt.scatter(x,Cavg[tmin:tmax])
plt.plot(x, out.best_fit, 'r-')
plt.show()