def __init__(self):
self.last_id = -1
#
# Show cursor on the clicked point
#
chart = lv.chart(lv.scr_act())
chart.set_size(200, 150)
chart.align(lv.ALIGN.CENTER, 0, -10)
chart.set_axis_tick(lv.chart.AXIS.PRIMARY_Y, 10, 5, 6, 5, True, 40)
chart.set_axis_tick(lv.chart.AXIS.PRIMARY_X, 10, 5, 10, 1, True, 30)
chart.add_event_cb(self.event_cb, lv.EVENT.ALL, None)
chart.refresh_ext_draw_size()
self.cursor = chart.add_cursor(lv.palette_main(lv.PALETTE.BLUE),
lv.DIR.LEFT | lv.DIR.BOTTOM)
self.ser = chart.add_series(lv.palette_main(lv.PALETTE.RED),
lv.chart.AXIS.PRIMARY_Y)
self.ser_p = []
for i in range(10):
self.ser_p.append(lv.rand(10, 90))
self.ser.y_points = self.ser_p
newser = chart.get_series_next(None)
# print("length of data points: ",len(newser.points))
chart.set_zoom_x(500)
label = lv.label(lv.scr_act())
label.set_text("Click on a point")
label.align_to(chart, lv.ALIGN.OUT_TOP_MID, 0, -5)
def lv_example_chart_8():
#Create a stacked_area_chart.obj
stacked_area_chart.obj = lv.chart(lv.scr_act())
stacked_area_chart.obj.set_size(200, 150)
stacked_area_chart.obj.center()
stacked_area_chart.obj.set_type(lv.chart.TYPE.LINE)
stacked_area_chart.obj.set_div_line_count(5, 7)
stacked_area_chart.obj.add_event_cb(draw_event_cb,
lv.EVENT.DRAW_PART_BEGIN, None)
# Set range to 0 to 100 for percentages. Draw ticks
stacked_area_chart.obj.set_range(lv.chart.AXIS.PRIMARY_Y, 0, 100)
stacked_area_chart.obj.set_axis_tick(lv.chart.AXIS.PRIMARY_Y, 3, 0, 5, 1,
True, 30)
#Set point size to 0 so the lines are smooth
stacked_area_chart.obj.set_style_size(0, 0, lv.PART.INDICATOR)
# Add some data series
stacked_area_chart.series_list[0] = stacked_area_chart.obj.add_series(
lv.palette_main(lv.PALETTE.RED), lv.chart.AXIS.PRIMARY_Y)
stacked_area_chart.series_list[1] = stacked_area_chart.obj.add_series(
lv.palette_main(lv.PALETTE.BLUE), lv.chart.AXIS.PRIMARY_Y)
stacked_area_chart.series_list[2] = stacked_area_chart.obj.add_series(
lv.palette_main(lv.PALETTE.GREEN), lv.chart.AXIS.PRIMARY_Y)
for point in range(10):
# Make some random data
vals = [lv.rand(10, 20), lv.rand(20, 30), lv.rand(20, 30)]
fixed_point_shift = 5
total = vals[0] + vals[1] + vals[2]
draw_heights = [0, 0, 0]
int_sum = 0
decimal_sum = 0
# Fixed point cascade rounding ensures percentages add to 100
for series_index in range(3):
decimal_sum += int(
((vals[series_index] * 100) << fixed_point_shift) // total)
int_sum += int((vals[series_index] * 100) / total)
modifier = (round_fixed_point(decimal_sum, fixed_point_shift) >>
fixed_point_shift) - int_sum
# The draw heights are equal to the percentage of the total each value is + the cumulative sum of the previous percentages.
# The accumulation is how the values get "stacked"
draw_heights[series_index] = int(int_sum + modifier)
# Draw to the series in the reverse order to which they were initialised.
# Without this the higher values will draw on top of the lower ones.
# This is because the Z-height of a series matches the order it was initialised
stacked_area_chart.obj.set_next_value(
stacked_area_chart.series_list[3 - series_index - 1],
draw_heights[series_index])
stacked_area_chart.obj.refresh()
def event_cb(e):
code = e.get_code()
obj = e.get_target()
if code == lv.EVENT.DRAW_PART_BEGIN:
dsc = lv.obj_draw_part_dsc_t.__cast__(e.get_param())
# Change the draw descriptor the 2nd button
if dsc.id == 1:
dsc.rect_dsc.radius = 0
if obj.get_selected_btn() == dsc.id:
dsc.rect_dsc.bg_color = lv.palette_darken(lv.PALETTE.GREY, 3)
else:
dsc.rect_dsc.bg_color = lv.palette_main(lv.PALETTE.BLUE)
dsc.rect_dsc.shadow_width = 6
dsc.rect_dsc.shadow_ofs_x = 3
dsc.rect_dsc.shadow_ofs_y = 3
dsc.label_dsc.color = lv.color_white()
# Change the draw descriptor the 3rd button
elif dsc.id == 2:
dsc.rect_dsc.radius = lv.RADIUS.CIRCLE
if obj.get_selected_btn() == dsc.id:
dsc.rect_dsc.bg_color = lv.palette_darken(lv.PALETTE.RED, 3)
else:
dsc.rect_dsc.bg_color = lv.palette_main(lv.PALETTE.RED)
dsc.label_dsc.color = lv.color_white()
elif dsc.id == 3:
dsc.label_dsc.opa = lv.OPA.TRANSP # Hide the text if any
if code == lv.EVENT.DRAW_PART_END:
dsc = lv.obj_draw_part_dsc_t.__cast__(e.get_param())
# Add custom content to the 4th button when the button itself was drawn
if dsc.id == 3:
# LV_IMG_DECLARE(img_star);
header = lv.img_header_t()
res = lv.img.decoder_get_info(img_star_argb, header)
if res != lv.RES.OK:
print("error when getting image header")
return
else:
a = lv.area_t()
a.x1 = dsc.draw_area.x1 + (dsc.draw_area.get_width() -
header.w) // 2
a.x2 = a.x1 + header.w - 1
a.y1 = dsc.draw_area.y1 + (dsc.draw_area.get_height() -
header.h) // 2
a.y2 = a.y1 + header.h - 1
img_draw_dsc = lv.draw_img_dsc_t()
img_draw_dsc.init()
img_draw_dsc.recolor = lv.color_black()
if obj.get_selected_btn() == dsc.id:
img_draw_dsc.recolor_opa = lv.OPA._30
lv.draw_img(a, dsc.clip_area, img_star_argb, img_draw_dsc)
def page_obj_init(self, par):
self.anim_obj = lv.obj(par)
self.anim_obj.set_size(30, 30)
self.anim_obj.set_align(lv.ALIGN.TOP_LEFT)
self.anim_obj.clear_flag(lv.obj.FLAG.SCROLLABLE)
self.anim_obj.set_style_bg_color(lv.palette_main(lv.PALETTE.RED),
lv.PART.MAIN)
self.anim_obj.set_grid_cell(lv.GRID_ALIGN.START, 0, 1,
lv.GRID_ALIGN.START, 0, 1)
self.p1_label = lv.label(par)
self.p2_label = lv.label(par)
self.p1_label.set_text("p1:0")
self.p2_label.set_text("p2:0")
self.p1_label.set_grid_cell(lv.GRID_ALIGN.START, 0, 1,
lv.GRID_ALIGN.START, 1, 1)
self.p2_label.set_grid_cell(lv.GRID_ALIGN.START, 0, 1,
lv.GRID_ALIGN.START, 2, 1)
self.p1_slider = lv.slider(par)
self.p2_slider = lv.slider(par)
self.p1_slider.set_range(0, 1024)
self.p2_slider.set_range(0, 1024)
self.p1_slider.set_style_pad_all(2, lv.PART.KNOB)
self.p2_slider.set_style_pad_all(2, lv.PART.KNOB)
self.p1_slider.add_event_cb(self.slider_event_cb,
lv.EVENT.VALUE_CHANGED, None)
self.p2_slider.add_event_cb(self.slider_event_cb,
lv.EVENT.VALUE_CHANGED, None)
self.p1_slider.set_grid_cell(lv.GRID_ALIGN.STRETCH, 1, 1,
lv.GRID_ALIGN.START, 1, 1)
self.p2_slider.set_grid_cell(lv.GRID_ALIGN.STRETCH, 1, 1,
lv.GRID_ALIGN.START, 2, 1)
self.run_btn = lv.btn(par)
self.run_btn.add_event_cb(self.run_btn_event_handler, lv.EVENT.CLICKED,
None)
btn_label = lv.label(self.run_btn)
btn_label.set_text(lv.SYMBOL.PLAY)
btn_label.center()
self.run_btn.set_grid_cell(lv.GRID_ALIGN.STRETCH, 2, 1,
lv.GRID_ALIGN.STRETCH, 1, 2)
self.chart = lv.chart(par)
self.chart.set_style_pad_all(0, lv.PART.MAIN)
self.chart.set_style_size(0, lv.PART.INDICATOR)
self.chart.set_type(lv.chart.TYPE.SCATTER)
self.ser1 = self.chart.add_series(lv.palette_main(lv.PALETTE.RED),
lv.chart.AXIS.PRIMARY_Y)
self.chart.set_range(lv.chart.AXIS.PRIMARY_Y, 0, 1024)
self.chart.set_range(lv.chart.AXIS.PRIMARY_X, 0, 1024)
self.chart.set_point_count(CHART_POINTS_NUM)
self.chart.set_grid_cell(lv.GRID_ALIGN.STRETCH, 0, 3,
lv.GRID_ALIGN.STRETCH, 3, 1)
def __init__(self):
super().__init__()
self.init()
# Default color is gray
self.set_bg_color(lv.palette_main(lv.PALETTE.GREY))
# Child elements are centered
self.set_layout(lv.LAYOUT_FLEX.value)
self.set_flex_main_place(lv.FLEX_ALIGN.CENTER)
self.set_flex_cross_place(lv.FLEX_ALIGN.CENTER)
self.set_flex_track_place(lv.FLEX_ALIGN.CENTER)
def event_cb(e):
# The original target of the event. Can be the buttons or the container
target = e.get_target()
# print(type(target))
# If container was clicked do nothing
if type(target) != type(lv.btn()):
return
# Make the clicked buttons red
target.set_style_bg_color(lv.palette_main(lv.PALETTE.RED), 0)
def event_cb(self, e):
code = e.get_code()
chart = lv.chart.__cast__(e.get_target())
if code == lv.EVENT.VALUE_CHANGED:
# print("last_id: ",self.last_id)
self.last_id = chart.get_pressed_point()
if self.last_id != lv.CHART_POINT.NONE:
p = lv.point_t()
chart.get_point_pos_by_id(self.ser, self.last_id, p)
chart.set_cursor_point(self.cursor, None, self.last_id)
elif code == lv.EVENT.DRAW_PART_END:
# print("EVENT.DRAW_PART_END")
dsc = lv.obj_draw_part_dsc_t.cast(e.get_param())
# if dsc.p1 and dsc.p2:
# print("p1, p2", dsc.p1,dsc.p2)
# print("p1.y, p2.y", dsc.p1.y, dsc.p2.y)
# print("last_id: ",self.last_id)
if dsc.part == lv.PART.CURSOR and dsc.p1 and dsc.p2 and dsc.p1.y == dsc.p2.y and self.last_id >= 0:
v = self.ser_p[self.last_id]
# print("value: ",v)
value_txt = str(v)
size = lv.point_t()
lv.txt_get_size(size, value_txt, lv.font_default(), 0, 0,
lv.COORD.MAX, lv.TEXT_FLAG.NONE)
a = lv.area_t()
a.y2 = dsc.p1.y - 5
a.y1 = a.y2 - size.y - 10
a.x1 = dsc.p1.x + 10
a.x2 = a.x1 + size.x + 10
draw_rect_dsc = lv.draw_rect_dsc_t()
draw_rect_dsc.init()
draw_rect_dsc.bg_color = lv.palette_main(lv.PALETTE.BLUE)
draw_rect_dsc.radius = 3
lv.draw_rect(a, dsc.clip_area, draw_rect_dsc)
draw_label_dsc = lv.draw_label_dsc_t()
draw_label_dsc.init()
draw_label_dsc.color = lv.color_white()
a.x1 += 5
a.x2 -= 5
a.y1 += 5
a.y2 -= 5
lv.draw_label(a, dsc.clip_area, draw_label_dsc, value_txt,
None)
def __init__(self):
super().__init__()
# Initialize the styles
self.style_btn = lv.style_t()
self.style_btn.init()
self.style_btn.set_bg_color(lv.palette_main(lv.PALETTE.GREEN))
self.style_btn.set_border_color(lv.palette_darken(lv.PALETTE.GREEN, 3))
self.style_btn.set_border_width(3)
# This theme is based on active theme
th_act = lv.theme_get_from_obj(lv.scr_act())
# This theme will be applied only after base theme is applied
self.set_parent(th_act)
def draw_part_event_cb(e):
obj = lv.table.__cast__(e.get_target())
dsc = lv.obj_draw_part_dsc_t.cast(e.get_param())
# If the cells are drawn../
if dsc.part == lv.PART.ITEMS:
row = dsc.id // obj.get_col_cnt()
col = dsc.id - row * obj.get_col_cnt()
# Make the texts in the first cell center aligned
if row == 0:
dsc.label_dsc.align = lv.TEXT_ALIGN.CENTER
dsc.rect_dsc.bg_color = lv.palette_main(lv.PALETTE.BLUE).color_mix(
dsc.rect_dsc.bg_color, lv.OPA._20)
dsc.rect_dsc.bg_opa = lv.OPA.COVER
# In the first column align the texts to the right
elif col == 0:
dsc.label_dsc.flag = lv.TEXT_ALIGN.RIGHT
# Make every 2nd row grayish
if row != 0 and (row % 2) == 0:
dsc.rect_dsc.bg_color = lv.palette_main(lv.PALETTE.GREY).color_mix(
dsc.rect_dsc.bg_color, lv.OPA._10)
dsc.rect_dsc.bg_opa = lv.OPA.COVER
def draw_event_cb(e):
dsc = e.get_draw_part_dsc()
if dsc.part == lv.PART.ITEMS:
obj = e.get_target()
ser = obj.get_series_next(None)
cnt = obj.get_point_count()
# print("cnt: ",cnt)
# Make older value more transparent
dsc.rect_dsc.bg_opa = (lv.OPA.COVER * dsc.id) // (cnt - 1)
# Make smaller values blue, higher values red
# x_array = chart.get_x_array(ser)
# y_array = chart.get_y_array(ser)
# dsc->id is the tells drawing order, but we need the ID of the point being drawn.
start_point = chart.get_x_start_point(ser)
# print("start point: ",start_point)
p_act = (start_point + dsc.id) % cnt # Consider start point to get the index of the array
# print("p_act", p_act)
x_opa = (x_array[p_act] * lv.OPA._50) // 200
y_opa = (y_array[p_act] * lv.OPA._50) // 1000
dsc.rect_dsc.bg_color = lv.palette_main(lv.PALETTE.RED).color_mix(
lv.palette_main(lv.PALETTE.BLUE),
x_opa + y_opa)
def set_value(indic, v):
meter.set_indicator_value(indic, v)
#
# A clock from a meter
#
meter = lv.meter(lv.scr_act())
meter.set_size(220, 220)
meter.center()
# Create a scale for the minutes
# 61 ticks in a 360 degrees range (the last and the first line overlaps)
scale_min = meter.add_scale()
meter.set_scale_ticks(scale_min, 61, 1, 10, lv.palette_main(lv.PALETTE.GREY))
meter.set_scale_range(scale_min, 0, 60, 360, 270)
# Create another scale for the hours. It's only visual and contains only major ticks
scale_hour = meter.add_scale()
meter.set_scale_ticks(scale_hour, 12, 0, 0,
lv.palette_main(lv.PALETTE.GREY)) # 12 ticks
meter.set_scale_major_ticks(scale_hour, 1, 2, 20, lv.color_black(),
10) # Every tick is major
meter.set_scale_range(scale_hour, 1, 12, 330,
300) # [1..12] values in an almost full circle
# LV_IMG_DECLARE(img_hand)
# Add the hands from images
indic_min = meter.add_needle_img(scale_min, img_hand_min_dsc, 5, 5)
# # A meter with multiple arcs # meter = lv.meter(lv.scr_act()) meter.center() meter.set_size(200, 200) # Remove the circle from the middle meter.remove_style(None, lv.PART.INDICATOR) # Add a scale first scale = meter.add_scale() meter.set_scale_ticks(scale, 11, 2, 10, lv.palette_main(lv.PALETTE.GREY)) meter.set_scale_major_ticks(scale, 1, 2, 30, lv.color_hex3(0xeee), 10) meter.set_scale_range(scale, 0, 100, 270, 90) # Add a three arc indicator indic1 = meter.add_arc(scale, 10, lv.palette_main(lv.PALETTE.RED), 0) indic2 = meter.add_arc(scale, 10, lv.palette_main(lv.PALETTE.GREEN), -10) indic3 = meter.add_arc(scale, 10, lv.palette_main(lv.PALETTE.BLUE), -20) # Create an animation to set the value a1 = lv.anim_t() a1.init() a1.set_values(0, 100) a1.set_time(2000) a1.set_repeat_delay(100) a1.set_playback_delay(100)
# Create an array for the points of the line
line_points = [{
"x": 5,
"y": 5
}, {
"x": 70,
"y": 70
}, {
"x": 120,
"y": 10
}, {
"x": 180,
"y": 60
}, {
"x": 240,
"y": 10
}]
# Create style
style_line = lv.style_t()
style_line.init()
style_line.set_line_width(8)
style_line.set_line_color(lv.palette_main(lv.PALETTE.BLUE))
style_line.set_line_rounded(True)
# Create a line and apply the new style
line1 = lv.line(lv.scr_act())
line1.set_points(line_points, 5) # Set the points
line1.add_style(style_line, 0)
line1.center()
# style_bg = lv.style_t() style_bg.init() style_bg.set_pad_all(0) style_bg.set_pad_gap(0) style_bg.set_clip_corner(True) style_bg.set_radius(lv.RADIUS.CIRCLE) style_bg.set_border_width(0) style_btn = lv.style_t() style_btn.init() style_btn.set_radius(0) style_btn.set_border_width(1) style_btn.set_border_opa(lv.OPA._50) style_btn.set_border_color(lv.palette_main(lv.PALETTE.GREY)) style_btn.set_border_side(lv.BORDER_SIDE.INTERNAL) style_btn.set_radius(0) map = [lv.SYMBOL.LEFT, "1", "2", "3", "4", "5", lv.SYMBOL.RIGHT, ""] btnm = lv.btnmatrix(lv.scr_act()) btnm.set_map(map) btnm.add_style(style_bg, 0) btnm.add_style(style_btn, lv.PART.ITEMS) btnm.add_event_cb(event_cb, lv.EVENT.VALUE_CHANGED, None) btnm.set_size(225, 35) # Allow selecting on one number at time btnm.set_btn_ctrl_all(lv.btnmatrix.CTRL.CHECKABLE) btnm.clear_btn_ctrl(0, lv.btnmatrix.CTRL.CHECKABLE)
chart.set_size(200, 150)
chart.align(lv.ALIGN.CENTER, 0, 0)
chart.add_event_cb(draw_event_cb, lv.EVENT.DRAW_PART_BEGIN, None)
chart.set_style_line_width(0, lv.PART.ITEMS) # Remove the lines
chart.set_type(lv.chart.TYPE.SCATTER)
chart.set_axis_tick(lv.chart.AXIS.PRIMARY_X, 5, 5, 5, 1, True, 30)
chart.set_axis_tick(lv.chart.AXIS.PRIMARY_Y, 10, 5, 6, 5, True, 50)
chart.set_range(lv.chart.AXIS.PRIMARY_X, 0, 200)
chart.set_range(lv.chart.AXIS.PRIMARY_Y, 0, 1000)
chart.set_point_count(50)
ser = chart.add_series(lv.palette_main(lv.PALETTE.RED),
lv.chart.AXIS.PRIMARY_Y)
x_array = []
y_array = []
for i in range(50):
x_array.append(lv.rand(0, 200))
y_array.append(lv.rand(0, 1000))
ser.x_points = x_array
ser.y_points = y_array
# Create an `lv_timer` to update the chart.
timer = lv.timer_create_basic()
timer.set_period(100)
#!//opt/bin/lv_micropython -i import time import lvgl as lv import display_driver # # Create LED's with different brightness and color # # Create a LED and switch it OFF led1 = lv.led(lv.scr_act()) led1.align(lv.ALIGN.CENTER, -80, 0) led1.off() # Copy the previous LED and set a brightness led2 = lv.led(lv.scr_act()) led2.align(lv.ALIGN.CENTER, 0, 0) led2.set_brightness(150) led2.set_color(lv.palette_main(lv.PALETTE.RED)) # Copy the previous LED and switch it ON led3 = lv.led(lv.scr_act()) led3.align(lv.ALIGN.CENTER, 80, 0) led3.on()
#!//opt/bin/lv_micropython -i import time import lvgl as lv import display_driver # # Using the background style properties # style = lv.style_t() style.init() style.set_radius(5) # Make a gradient style.set_bg_opa(lv.OPA.COVER) style.set_bg_color(lv.palette_lighten(lv.PALETTE.GREY, 1)) style.set_bg_grad_color(lv.palette_main(lv.PALETTE.BLUE)) style.set_bg_grad_dir(lv.GRAD_DIR.VER) # Shift the gradient to the bottom style.set_bg_main_stop(128) style.set_bg_grad_stop(192) # Create an object with the new style obj = lv.obj(lv.scr_act()) obj.add_style(style, 0) obj.center()
#!/opt/bin/lv_micropython -i import lvgl as lv import display_driver display_driver.getdisplay_landscape() # # Using the Shadow style properties # style = lv.style_t() style.init() # Set a background color and a radius style.set_radius(5) style.set_bg_opa(lv.OPA.COVER) style.set_bg_color(lv.palette_lighten(lv.PALETTE.GREY, 1)) # Add a shadow style.set_shadow_width(8) style.set_shadow_color(lv.palette_main(lv.PALETTE.BLUE)) style.set_shadow_ofs_x(10) style.set_shadow_ofs_y(20) # Create an object with the new style obj = lv.obj(lv.scr_act()) obj.add_style(style, 0) obj.center()
#
# Create a transparent canvas with Chroma keying and indexed color format (palette).
#
# Create a button to better see the transparency
btn=lv.btn(lv.scr_act())
# Create a buffer for the canvas
cbuf= bytearray(LV_CANVAS_BUF_SIZE_INDEXED_1BIT(CANVAS_WIDTH, CANVAS_HEIGHT))
# Create a canvas and initialize its the palette
canvas = lv.canvas(lv.scr_act())
canvas.set_buffer(cbuf, CANVAS_WIDTH, CANVAS_HEIGHT, lv.img.CF.INDEXED_1BIT)
canvas.set_palette(0, LV_COLOR_CHROMA_KEY)
canvas.set_palette(1, lv.palette_main(lv.PALETTE.RED))
# Create colors with the indices of the palette
c0 = lv.color_t()
c1 = lv.color_t()
c0.full = 0
c1.full = 1
# Red background (There is no dedicated alpha channel in indexed images so LV_OPA_COVER is ignored)
canvas.fill_bg(c1, lv.OPA.COVER)
# Create hole on the canvas
for y in range(10,30):
for x in range(5,20):
canvas.set_px(x, y, c0)
import lvgl as lv
import display_driver
def set_value(indic, v):
meter.set_indicator_value(indic, v)
#
# A simple meter
#
meter = lv.meter(lv.scr_act())
meter.center()
meter.set_size(200, 200)
# Add a scale first
scale = meter.add_scale()
meter.set_scale_ticks(scale, 51, 2, 10, lv.palette_main(lv.PALETTE.GREY))
meter.set_scale_major_ticks(scale, 10, 4, 15, lv.color_black(), 10)
indic = lv.meter_indicator_t()
# Add a blue arc to the start
indic = meter.add_arc(scale, 3, lv.palette_main(lv.PALETTE.BLUE), 0)
meter.set_indicator_start_value(indic, 0)
meter.set_indicator_end_value(indic, 20)
# Make the tick lines blue at the start of the scale
indic = meter.add_scale_lines(scale, lv.palette_main(lv.PALETTE.BLUE), lv.palette_main(lv.PALETTE.BLUE), False, 0)
meter.set_indicator_start_value(indic, 0)
meter.set_indicator_end_value(indic, 20)
# Add a red arc to the end
#!/opt/bin/lv_micropython -i
import utime as time
import lvgl as lv
import display_driver
display_driver.getdisplay_landscape()
#
# Create span
#
style = lv.style_t()
style.init()
style.set_border_width(1)
style.set_border_color(lv.palette_main(lv.PALETTE.ORANGE))
style.set_pad_all(2)
spans = lv.spangroup(lv.scr_act())
spans.set_width(300)
spans.set_height(300)
spans.center()
spans.add_style(style, 0)
spans.set_align(lv.TEXT_ALIGN.LEFT)
spans.set_overflow(lv.SPAN_OVERFLOW.CLIP)
spans.set_indent(20)
spans.set_mode(lv.SPAN_MODE.BREAK)
span = spans.new_span()
span.set_text("china is a beautiful country.")
span.style.set_text_color(lv.palette_main(lv.PALETTE.RED))
span.style.set_text_decor(lv.TEXT_DECOR.STRIKETHROUGH
def slider_event_cb(e):
# Recolor the image based on the sliders' values
color = lv.color_make(red_slider.get_value(), green_slider.get_value(),
blue_slider.get_value())
intense = intense_slider.get_value()
img1.set_style_img_recolor_opa(intense, 0)
img1.set_style_img_recolor(color, 0)
#
# Demonstrate runtime image re-coloring
#
# Create 4 sliders to adjust RGB color and re-color intensity
red_slider = create_slider(lv.palette_main(lv.PALETTE.RED))
green_slider = create_slider(lv.palette_main(lv.PALETTE.GREEN))
blue_slider = create_slider(lv.palette_main(lv.PALETTE.BLUE))
intense_slider = create_slider(lv.palette_main(lv.PALETTE.GREY))
red_slider.set_value(lv.OPA._20, lv.ANIM.OFF)
green_slider.set_value(lv.OPA._90, lv.ANIM.OFF)
blue_slider.set_value(lv.OPA._60, lv.ANIM.OFF)
intense_slider.set_value(lv.OPA._50, lv.ANIM.OFF)
red_slider.align(lv.ALIGN.LEFT_MID, 25, 0)
green_slider.align_to(red_slider, lv.ALIGN.OUT_RIGHT_MID, 25, 0)
blue_slider.align_to(green_slider, lv.ALIGN.OUT_RIGHT_MID, 25, 0)
intense_slider.align_to(blue_slider, lv.ALIGN.OUT_RIGHT_MID, 25, 0)
# Now create the actual image
display_driver.getdisplay_landscape()
def set_temp(bar, temp):
bar.set_value(temp, lv.ANIM.ON)
#
# A temperature meter example
#
style_indic = lv.style_t()
style_indic.init()
style_indic.set_bg_opa(lv.OPA.COVER)
style_indic.set_bg_color(lv.palette_main(lv.PALETTE.RED))
style_indic.set_bg_grad_color(lv.palette_main(lv.PALETTE.BLUE))
style_indic.set_bg_grad_dir(lv.GRAD_DIR.VER)
bar = lv.bar(lv.scr_act())
bar.add_style(style_indic, lv.PART.INDICATOR)
bar.set_size(20, 200)
bar.center()
bar.set_range(-20, 40)
a = lv.anim_t()
a.init()
a.set_time(3000)
a.set_playback_time(3000)
a.set_var(bar)
a.set_values(-20, 40)
#!//opt/bin/lv_micropython -i
import time
import lvgl as lv
import display_driver
#
# Using the line style properties
#
style = lv.style_t()
style.init()
style.set_line_color(lv.palette_main(lv.PALETTE.GREY))
style.set_line_width(6)
style.set_line_rounded(True)
# Create an object with the new style
obj = lv.line(lv.scr_act())
obj.add_style(style, 0)
p = [{"x": 10, "y": 30}, {"x": 30, "y": 50}, {"x": 100, "y": 0}]
obj.set_points(p, 3)
obj.center()
chart.set_size(200, 150)
chart.align(lv.ALIGN.CENTER, 0, 0)
chart.add_event_cb(draw_event_cb, lv.EVENT.DRAW_PART_BEGIN, None)
chart.set_style_line_width(0, lv.PART.ITEMS) # Remove the lines
chart.set_type(lv.chart.TYPE.SCATTER)
chart.set_axis_tick(lv.chart.AXIS.PRIMARY_X, 5, 5, 5, 1, True, 30)
chart.set_axis_tick(lv.chart.AXIS.PRIMARY_Y, 10, 5, 6, 5, True, 50)
chart.set_range(lv.chart.AXIS.PRIMARY_X, 0, 200)
chart.set_range(lv.chart.AXIS.PRIMARY_Y, 0, 1000)
chart.set_point_count(50)
ser = chart.add_series(lv.palette_main(lv.PALETTE.RED), lv.chart.AXIS.PRIMARY_Y)
x_array = []
y_array = []
for i in range(50):
x_array.append(lv.rand(0, 200))
y_array.append(lv.rand(0, 1000))
ser.x_points = x_array
ser.y_points = y_array
# Create an `lv_timer` to update the chart.
timer = lv.timer_create_basic()
timer.set_period(100)
timer.set_cb(lambda src: add_data(timer,chart))
#!/opt/bin/lv_micropython -i import lvgl as lv import display_driver display_driver.getdisplay_landscape() # # Example of styling the bar # style_bg = lv.style_t() style_indic = lv.style_t() style_bg.init() style_bg.set_border_color(lv.palette_main(lv.PALETTE.BLUE)) style_bg.set_border_width(2) style_bg.set_pad_all(6) # To make the indicator smaller style_bg.set_radius(6) style_bg.set_anim_time(1000) style_indic.init() style_indic.set_bg_opa(lv.OPA.COVER) style_indic.set_bg_color(lv.palette_main(lv.PALETTE.BLUE)) style_indic.set_radius(3) bar = lv.bar(lv.scr_act()) bar.remove_style_all() # To have a clean start bar.add_style(style_bg, 0) bar.add_style(style_indic, lv.PART.INDICATOR) bar.set_size(200, 20)
#!/opt/bin/lv_micropython -i
import lvgl as lv
import display_driver
display_driver.getdisplay_landscape()
# Create a chart
chart = lv.chart(lv.scr_act())
chart.set_size(200, 150)
chart.center()
chart.set_type(lv.chart.TYPE.LINE) # Show lines and points too
# Add two data series
ser1 = chart.add_series(lv.palette_main(lv.PALETTE.RED),
lv.chart.AXIS.PRIMARY_Y)
ser2 = chart.add_series(lv.palette_main(lv.PALETTE.GREEN),
lv.chart.AXIS.SECONDARY_Y)
print(ser2)
# Set next points on ser1
chart.set_next_value(ser1, 10)
chart.set_next_value(ser1, 10)
chart.set_next_value(ser1, 10)
chart.set_next_value(ser1, 10)
chart.set_next_value(ser1, 10)
chart.set_next_value(ser1, 10)
chart.set_next_value(ser1, 10)
chart.set_next_value(ser1, 30)
chart.set_next_value(ser1, 70)
chart.set_next_value(ser1, 90)
import display_driver import time # # Create styles from scratch for buttons. # style_btn = lv.style_t() style_btn_red = lv.style_t() style_btn_pressed = lv.style_t() # Create a simple button style style_btn.init() style_btn.set_radius(10) style_btn.set_bg_opa(lv.OPA.COVER) style_btn.set_bg_color(lv.palette_lighten(lv.PALETTE.GREY, 3)) style_btn.set_bg_grad_color(lv.palette_main(lv.PALETTE.GREY)) style_btn.set_bg_grad_dir(lv.GRAD_DIR.VER) # Add a border style_btn.set_border_color(lv.color_white()) style_btn.set_border_opa(lv.OPA._70) style_btn.set_border_width(2) # Set the text style style_btn.set_text_color(lv.color_white()) # Create a red style. Change only some colors. style_btn_red.init() style_btn_red.set_bg_color(lv.palette_main(lv.PALETTE.RED)) style_btn_red.set_bg_grad_color(lv.palette_lighten(lv.PALETTE.RED, 2))
#!//opt/bin/lv_micropython -i import time import lvgl as lv import display_driver _CANVAS_WIDTH = 200 _CANVAS_HEIGHT = 150 LV_IMG_ZOOM_NONE = 256 rect_dsc = lv.draw_rect_dsc_t() rect_dsc.init() rect_dsc.radius = 10 rect_dsc.bg_opa = lv.OPA.COVER rect_dsc.bg_grad_dir = lv.GRAD_DIR.HOR rect_dsc.bg_color = lv.palette_main(lv.PALETTE.RED) rect_dsc.bg_grad_color = lv.palette_main(lv.PALETTE.BLUE) rect_dsc.border_width = 2 rect_dsc.border_opa = lv.OPA._90 rect_dsc.border_color = lv.color_white() rect_dsc.shadow_width = 5 rect_dsc.shadow_ofs_x = 5 rect_dsc.shadow_ofs_y = 5 label_dsc = lv.draw_label_dsc_t() label_dsc.init() label_dsc.color = lv.palette_main(lv.PALETTE.YELLOW) cbuf = bytearray(_CANVAS_WIDTH * _CANVAS_HEIGHT * 4) canvas = lv.canvas(lv.scr_act()) canvas.set_buffer(cbuf, _CANVAS_WIDTH, _CANVAS_HEIGHT, lv.img.CF.TRUE_COLOR)
#!/opt/bin/lv_micropython -i import lvgl as lv import display_driver display_driver.getdisplay_landscape() # # Using the border style properties # style = lv.style_t() style.init() # Set a background color and a radius style.set_radius(10) style.set_bg_opa(lv.OPA.COVER) style.set_bg_color(lv.palette_lighten(lv.PALETTE.GREY, 1)) # Add border to the bottom+right style.set_border_color(lv.palette_main(lv.PALETTE.BLUE)) style.set_border_width(5) style.set_border_opa(lv.OPA._50) style.set_border_side(lv.BORDER_SIDE.BOTTOM | lv.BORDER_SIDE.RIGHT) # Create an object with the new style obj = lv.obj(lv.scr_act()) obj.add_style(style, 0) obj.center()
