def postprocess(self, mconfig: Any, service_cfg: Any,
desired_cfg: EnodebConfiguration) -> None:
"""
Add some params to the desired config
Args:
mconfig (Any): mconfig
service_cfg (Any): service config
desired_cfg (EnodebConfiguration): desired config
"""
desired_cfg.set_parameter(ParameterName.SAS_ENABLED, 1)
desired_cfg.set_parameter_for_object(
ParameterName.PLMN_N_CELL_RESERVED % 1,
True, # noqa: WPS345,WPS425
ParameterName.PLMN_N % 1, # noqa: WPS345
)
parameters_to_delete = [
ParameterName.RADIO_ENABLE,
ParameterName.POWER_SPECTRAL_DENSITY,
ParameterName.EARFCNDL,
ParameterName.EARFCNUL,
ParameterName.BAND,
ParameterName.DL_BANDWIDTH,
ParameterName.UL_BANDWIDTH,
ParameterName.SAS_RADIO_ENABLE,
]
for p in parameters_to_delete:
if desired_cfg.has_parameter(p):
desired_cfg.delete_parameter(p)
def postprocess(
self,
mconfig: Any,
service_cfg: Any,
desired_cfg: EnodebConfiguration,
) -> None:
# TODO: Get this config from the domain proxy
# TODO @amarpad, set these when DProxy integration is done.
# For now the radio will directly talk to the SAS and get these
# attributes.
desired_cfg.delete_parameter(ParameterName.EARFCNDL)
desired_cfg.delete_parameter(ParameterName.DL_BANDWIDTH)
desired_cfg.delete_parameter(ParameterName.UL_BANDWIDTH)
# go through misc parameters and set them to default.
for name, val in FreedomFiOneMiscParameters.defaults.items():
desired_cfg.set_parameter(name, val)
# Bump up the parameter key version
self.acs.parameter_version_inc()
# Workaround a bug in Sercomm firmware in release 3920, 3921
# where the meaning of CellReservedForOperatorUse is wrong.
# Set to True to ensure the PLMN is not reserved
num_plmns = self.acs.data_model.get_num_plmns()
for i in range(1, num_plmns + 1):
object_name = ParameterName.PLMN_N % i
desired_cfg.set_parameter_for_object(
param_name=ParameterName.PLMN_N_CELL_RESERVED % i,
value=True,
object_name=object_name,
)
if self.WEB_UI_ENABLE_LIST_KEY in service_cfg:
serial_nos = service_cfg.get(self.WEB_UI_ENABLE_LIST_KEY)
if self.acs.device_cfg.has_parameter(
ParameterName.SERIAL_NUMBER, ):
if self.acs.get_parameter(ParameterName.SERIAL_NUMBER) in \
serial_nos:
desired_cfg.set_parameter(
FreedomFiOneMiscParameters.WEB_UI_ENABLE,
True,
)
else:
# This should not happen
EnodebdLogger.error("Serial number unknown for device")
if self.SAS_KEY not in service_cfg:
return
sas_cfg = service_cfg[self.SAS_KEY]
sas_param_names = self.acs.data_model.get_sas_param_names()
for name, val in sas_cfg.items():
if name not in sas_param_names:
EnodebdLogger.warning("Ignoring attribute %s", name)
continue
desired_cfg.set_parameter(name, val)
def postprocess(self, mconfig: Any, service_cfg: Any,
desired_cfg: EnodebConfiguration) -> None:
"""
Add some params to the desired config
Args:
mconfig (Any): mconfig
service_cfg (Any): service config
desired_cfg (EnodebConfiguration): desired config
"""
desired_cfg.set_parameter(ParameterName.SAS_ENABLED, 1)
# Set Cell reservation for both cells
desired_cfg.set_parameter_for_object(
ParameterName.PLMN_N_CELL_RESERVED % 1,
True, # noqa: WPS345,WPS425
ParameterName.PLMN_N % 1, # noqa: WPS345
)
desired_cfg.set_parameter(
CarrierAggregationParameters.CA_PLMN_CELL_RESERVED,
True,
)
# Make sure FAPService.1. is Primary
desired_cfg.set_parameter_for_object(
ParameterName.PLMN_N_PRIMARY % 1,
True, # noqa: WPS345,WPS425
ParameterName.PLMN_N % 1, # noqa: WPS345
)
desired_cfg.set_parameter(
CarrierAggregationParameters.CA_PLMN_PRIMARY,
False,
)
# Enable both cells
desired_cfg.set_parameter_for_object(
ParameterName.PLMN_N_ENABLE % 1,
True, # noqa: WPS345,WPS425
ParameterName.PLMN_N % 1, # noqa: WPS345
)
desired_cfg.set_parameter(
CarrierAggregationParameters.CA_PLMN_ENABLE,
True,
)
parameters_to_delete = [
ParameterName.RADIO_ENABLE,
ParameterName.POWER_SPECTRAL_DENSITY,
ParameterName.EARFCNDL,
ParameterName.EARFCNUL,
ParameterName.BAND,
ParameterName.DL_BANDWIDTH,
ParameterName.UL_BANDWIDTH,
ParameterName.SAS_RADIO_ENABLE,
]
for p in parameters_to_delete:
if desired_cfg.has_parameter(p):
desired_cfg.delete_parameter(p)
def postprocess(
self,
mconfig: Any,
service_cfg: Any,
desired_cfg: EnodebConfiguration,
) -> None:
# TODO: Get this config from the domain proxy
# TODO @amarpad, set these when DProxy integration is done.
# For now the radio will directly talk to the SAS and get these
# attributes.
desired_cfg.delete_parameter(ParameterName.EARFCNDL)
desired_cfg.delete_parameter(ParameterName.DL_BANDWIDTH)
desired_cfg.delete_parameter(ParameterName.UL_BANDWIDTH)
# go through misc parameters and set them to default.
for name, val in FreedomFiOneMiscParameters.defaults.items():
desired_cfg.set_parameter(name, val)
# Bump up the parameter key version
self.acs.parameter_version_inc()
if self.WEB_UI_ENABLE_LIST_KEY in service_cfg:
serial_nos = service_cfg.get(self.WEB_UI_ENABLE_LIST_KEY)
if self.acs.device_cfg.has_parameter(
ParameterName.SERIAL_NUMBER, ):
if self.acs.get_parameter(ParameterName.SERIAL_NUMBER) in \
serial_nos:
desired_cfg.set_parameter(
FreedomFiOneMiscParameters.WEB_UI_ENABLE,
True,
)
else:
# This should not happen
EnodebdLogger.error("Serial number unknown for device")
if self.SAS_KEY not in service_cfg:
return
sas_cfg = service_cfg[self.SAS_KEY]
sas_param_names = self.acs.data_model.get_sas_param_names()
for name, val in sas_cfg.items():
if name not in sas_param_names:
EnodebdLogger.warning("Ignoring attribute %s", name)
continue
desired_cfg.set_parameter(name, val)
def postprocess(self, mconfig: Any, service_cfg: Any,
desired_cfg: EnodebConfiguration) -> None:
desired_cfg.delete_parameter(ParameterName.ADMIN_STATE)
def postprocess(self, desired_cfg: EnodebConfiguration) -> None:
# We don't set this parameter for this device, it should be
# auto-configured by the device.
desired_cfg.delete_parameter(ParameterName.ADMIN_STATE)
return
