def sqCreateStikyLipsDeformers(self, *args):
baseMesh = None
mainCurveList = [self.mainCurveA, self.mainCurveB]
for mainCurve in mainCurveList:
if baseMesh == None:
baseMesh = cmds.duplicate(self.receptList[0], name=self.receptList[0]+"Base")[0]
cmds.setAttr(baseMesh+".visibility", 0)
wrapNode = cmds.deformer(mainCurve, name="StickyLips_Wrap", type="wrap")[0]
try:
cmds.connectAttr(self.receptList[0]+".dropoff", wrapNode+".dropoff[0]", force=True)
cmds.connectAttr(self.receptList[0]+".inflType", wrapNode+".inflType[0]", force=True)
cmds.connectAttr(self.receptList[0]+".smoothness", wrapNode+".smoothness[0]", force=True)
cmds.connectAttr(self.receptList[0]+"Shape.worldMesh[0]", wrapNode+".driverPoints[0]", force=True)
except:
pass
cmds.connectAttr(baseMesh+"Shape.worldMesh[0]", wrapNode+".basePoints[0]", force=True)
cmds.connectAttr(mainCurve+"Shape.worldMatrix[0]", wrapNode+".geomMatrix", force=True)
cmds.setAttr(wrapNode+".maxDistance", 1)
cmds.setAttr(wrapNode+".autoWeightThreshold", 1)
cmds.setAttr(wrapNode+".exclusiveBind", 1)
baseCurveList = [self.baseCurveA, self.baseCurveB]
for c, baseCurve in enumerate(baseCurveList):
wireNode = cmds.wire(self.receptList[1], name=baseCurve+"_Wire", groupWithBase=False, crossingEffect=0, localInfluence=0)[0]
cmds.connectAttr(mainCurveList[c]+"Shape.worldSpace[0]", wireNode+".baseWire[0]", force=True)
cmds.connectAttr(baseCurve+"Shape.worldSpace[0]", wireNode+".deformedWire[0]", force=True)
self.wireNodeList.append(wireNode)
wireLocList = []
for i in range(0, self.maxIter):
wireLocList.append(baseCurve+".u["+str(i)+"]")
cmds.dropoffLocator(1, 1, wireNode, wireLocList)
def sqCreateStikyLipsDeformers(self, *args):
baseMesh = None
mainCurveList = [self.mainCurveA, self.mainCurveB]
for mainCurve in mainCurveList:
if baseMesh == None:
baseMesh = cmds.duplicate(self.receptList[0],
name=self.receptList[0] + "Base")[0]
cmds.setAttr(baseMesh + ".visibility", 0)
wrapNode = cmds.deformer(mainCurve,
name="StickyLips_Wrap",
type="wrap")[0]
try:
cmds.connectAttr(self.receptList[0] + ".dropoff",
wrapNode + ".dropoff[0]",
force=True)
cmds.connectAttr(self.receptList[0] + ".inflType",
wrapNode + ".inflType[0]",
force=True)
cmds.connectAttr(self.receptList[0] + ".smoothness",
wrapNode + ".smoothness[0]",
force=True)
cmds.connectAttr(self.receptList[0] + "Shape.worldMesh[0]",
wrapNode + ".driverPoints[0]",
force=True)
except:
pass
cmds.connectAttr(baseMesh + "Shape.worldMesh[0]",
wrapNode + ".basePoints[0]",
force=True)
cmds.connectAttr(mainCurve + "Shape.worldMatrix[0]",
wrapNode + ".geomMatrix",
force=True)
cmds.setAttr(wrapNode + ".maxDistance", 1)
cmds.setAttr(wrapNode + ".autoWeightThreshold", 1)
cmds.setAttr(wrapNode + ".exclusiveBind", 1)
baseCurveList = [self.baseCurveA, self.baseCurveB]
for c, baseCurve in enumerate(baseCurveList):
wireNode = cmds.wire(self.receptList[1],
name=baseCurve + "_Wire",
groupWithBase=False,
crossingEffect=0,
localInfluence=0)[0]
cmds.connectAttr(mainCurveList[c] + "Shape.worldSpace[0]",
wireNode + ".baseWire[0]",
force=True)
cmds.connectAttr(baseCurve + "Shape.worldSpace[0]",
wireNode + ".deformedWire[0]",
force=True)
self.wireNodeList.append(wireNode)
wireLocList = []
for i in range(0, self.maxIter):
wireLocList.append(baseCurve + ".u[" + str(i) + "]")
cmds.dropoffLocator(1, 1, wireNode, wireLocList)
def rebuild(self):
"""
Rebuild the wire deformer from the recorded deformerData
"""
# ==========
# - Checks -
# ==========
# Check Data
for influence in self._influenceData.iterkeys():
# Check Wire Curve
if not cmds.objExists(influence):
print('Wire curve "' + influence + '" does not exist! Curve will not be added to deformer!')
# Check Base Curves
baseCurve = self._influenceData[influence]['influenceBase']
if not cmds.objExists(baseCurve):
print(
'Wire curve base "' + baseCurve + '" does not exist! A static base curve will be generated from the deforming wire curve!')
# Check Dropoff Locators
for locator in self._locatorData.iterkeys():
if cmds.objExists(locator):
cmds.delete(cmds.listRelatives(locator, p=True)[0])
# ====================
# - Rebuild Deformer -
# ====================
result = super(WireData, self).rebuild()
wireDeformer = result['deformer']
# =======================
# - Connect Wire Curves -
# =======================
for influence in self._influenceData.iterkeys():
# Get current wire curve pair
wireCurve = influence
infIndex = self._influenceData[influence]['index']
baseCurve = self._influenceData[influence]['influenceBase']
# Connect deformed wire
if not cmds.objExists(influence): continue
cmds.connectAttr(wireCurve + '.worldSpace[0]', wireDeformer + '.deformedWire[' + str(infIndex) + ']', f=True)
# Connect base wire
if not cmds.objExists(baseCurve): baseCurve = cmds.duplicate(influence, n=baseCurve)[0]
cmds.connectAttr(baseCurve + '.worldSpace[0]', wireDeformer + '.baseWire[' + str(infIndex) + ']', f=True)
cmds.setAttr(baseCurve + '.v', 0)
# Set Influence Attributes
if cmds.getAttr(wireDeformer + '.dropoffDistance[' + str(infIndex) + ']', se=True):
cmds.setAttr(wireDeformer + '.dropoffDistance[' + str(infIndex) + ']',
self._influenceData[influence]['dropoffDist'])
if cmds.getAttr(wireDeformer + '.scale[' + str(infIndex) + ']', se=True):
cmds.setAttr(wireDeformer + '.scale[' + str(infIndex) + ']', self._influenceData[influence]['scale'])
# ============================
# - Rebuild Dropoff Locators -
# ============================
for locator in self._locatorData.iterkeys():
# Get data
parent = self._locatorData[locator]['parent']
param = self._locatorData[locator]['parameter']
env = self._locatorData[locator]['envelope']
percent = self._locatorData[locator]['percent']
twist = self._locatorData[locator]['twist']
# Create Locator
loc = cmds.dropoffLocator(env, percent, wire, parent + '.u[' + str(param) + ']')[0]
# Apply Twist
locConn = cmds.listConnections(loc + '.param', s=False, d=True, p=True)[0]
locConnIndex = locConn.split('[')[-1].split(']')[0]
cmds.setAttr(wireDeformer + '.wireLocatorTwist[' + str(locConnIndex) + ']', twist)
# =================
# - Return Result -
# =================
self.result['influence'] = self._influenceData.keys()
self.result['dropoffLocator'] = self._locatorData.keys()
return self.result
def dropoffLocator(*args, **kwargs):
res = cmds.dropoffLocator(*args, **kwargs)
if not kwargs.get('query', kwargs.get('q', False)):
res = _factories.maybeConvert(res, _general.PyNode)
return res
cmds.delete(cmds.orientConstraint(startLoc, sPlane))
cmds.delete(sPlane, constructionHistory=True)
sCurve = cmds.curve(degree=1, point=[startPoint, endPoint])
sCurve = cmds.rename(
sCurve, un + 'stretchCurve'
) # If named at the creation time, the shape node doesn't get renamed
cmds.parent(startLoc, endLoc, sPlane[0], sCurve, sGrp)
# create wire deformer and dropoffLocator for twisting
sWire = cmds.wire(sPlane[0], wire=sCurve, name=un + 'stretchWire')
cmds.wire(sWire[1], edit=True, dropoffDistance=[(0, 20), (1, 20)])
cmds.select(sWire[1] + '.u[0]', r=True)
cmds.dropoffLocator(1.0, 1.0, sWire[0])
cmds.select(sWire[1] + '.u[1]', r=True)
cmds.dropoffLocator(1.0, 1.0, sWire[0])
# skin wire to bone driver, connect rotation of locators to drop off locators twist
cmds.connectAttr(startLoc[0] + '.rotateX', sWire[0] + '.wireLocatorTwist[0]')
cmds.connectAttr(endLoc[0] + '.rotateX', sWire[0] + '.wireLocatorTwist[1]')
cmds.skinCluster(startWJoint,
endWJoint,
sWire[1],
maximumInfluences=1,
toSelectedBones=True)
# crating follicles on sPlane and joints
def make_stretch_plane(prefix='',
start_joint=cmds.ls(selection=True)[0],
end_joint=cmds.listRelatives(start_joint)[0],
number_of_bones=3,
stretch_len=cmds.getAttr(end_joint + '.translateX')):
"""
:param prefix: str, name of objects
:param start_joint: str, start point of stretch plane and parent bone
:param end_joint: str, end point of stretch plane (right now its just the child of the start joint)
:param number_of_bones: float, how many bones will be placed along the length of the plane
:param stretch_len: float, the length of the plane, from start joint to end joint
:return: list[], containing all stretch joints for skinning
"""
# TODO need to get actual distance between points for spine
start_point = cmds.xform(start_joint,
query=True,
worldSpace=True,
translation=True)
end_point = cmds.xform(end_joint,
query=True,
worldSpace=True,
translation=True)
# create start + end locators, bones to skin the wire to, and an empty group
start_loc = cmds.spaceLocator(name='start_loc')
cmds.parent(start_loc, start_joint, relative=True)
end_loc = cmds.spaceLocator(name='end_loc')
cmds.parent(end_loc, end_joint, relative=True)
start_w_joint = cmds.joint(name='startWireJoint')
cmds.parent(start_w_joint, start_loc)
end_w_joint = cmds.joint(name='endWireJoint')
cmds.parent(end_w_joint, end_loc)
s_grp = cmds.group(empty=True, name=prefix + 'stretchPlaneGrp')
cmds.delete(cmds.parentConstraint(start_loc, s_grp))
# create NURBS plane and CV curve. Group everything into the new sGrp
s_plane = cmds.nurbsPlane(name=prefix + 'stretchPlane',
width=stretch_len,
lengthRatio=.2,
patchesU=number_of_bones,
axis=(0, 1, 0))
s_plane_shape = cmds.listRelatives(s_plane, shapes=True)[0]
cmds.delete(cmds.parentConstraint(start_loc, end_loc, s_plane))
cmds.delete(cmds.orientConstraint(start_loc, s_plane))
cmds.delete(s_plane, constructionHistory=True)
s_curve = cmds.curve(degree=1, point=[start_point, end_point])
s_curve = cmds.rename(
s_curve, prefix + 'stretchCurve'
) # If named at the creation time, the shape node doesn't get renamed
cmds.parent(start_loc, end_loc, s_plane[0], s_curve, s_grp)
# create wire deformer and dropoffLocator for twisting
s_wire_deform = cmds.wire(s_plane[0],
wire=s_curve,
name=prefix + 'stretchWire')[0]
cmds.wire(s_curve, edit=True, dropoffDistance=[(0, 20), (1, 20)])
cmds.select(s_curve + '.u[0]', r=True)
cmds.dropoffLocator(1.0, 1.0, s_wire_deform)
cmds.select(s_curve + '.u[1]', r=True)
cmds.dropoffLocator(1.0, 1.0, s_wire_deform)
# connect rotation of locators to drop off locators twist, skin wire to bone driver
cmds.connectAttr(start_loc[0] + '.rotateX',
s_wire_deform + '.wireLocatorTwist[0]')
cmds.connectAttr(end_loc[0] + '.rotateZ',
s_wire_deform + '.wireLocatorTwist[1]')
cmds.skinCluster(start_w_joint,
end_w_joint,
s_curve,
maximumInfluences=1,
toSelectedBones=True)
# crating follicles on sPlane and joints
s_joints_collection = []
fol_grp = cmds.group(empty=True, name=prefix + 'follicleGrp')
cmds.parent(fol_grp, s_grp)
for x in range(number_of_bones):
fol_shape = cmds.createNode("follicle")
fol_trans = cmds.listRelatives(fol_shape, parent=True)[0]
fol_trans = cmds.rename(fol_trans,
prefix + "follicle_{:02d}".format(x + 1))
fol_shape = cmds.listRelatives(fol_trans, shapes=True)[0]
fol_shape = cmds.rename(fol_shape,
prefix + "follicleShape_{:02d}".format(x + 1))
cmds.connectAttr(s_plane_shape + '.worldMatrix[0]',
fol_shape + '.inputWorldMatrix')
cmds.connectAttr(s_plane_shape + '.local', fol_shape + '.inputSurface')
cmds.connectAttr(fol_shape + '.outTranslate', fol_trans + '.translate')
cmds.connectAttr(fol_shape + '.outRotate', fol_trans + '.rotate')
v_position = (1.0 / (number_of_bones + 1)) * (x + 1)
cmds.setAttr(fol_shape + '.parameterU', v_position)
cmds.setAttr(fol_shape + '.parameterV', .5)
# here I'm adding a joint, as the follicle is selected the joint is parented under it.
# im also adding the joint to a list i can use later
s_joints_collection.append(
cmds.joint(name=prefix + "stretchJoint_{:02d}".format(x + 1)))
cmds.parent(fol_trans, fol_grp)
# creating nodes for stretching bones
s_curve_shape = cmds.listRelatives(s_curve, shapes=True)[0]
s_curve_info = cmds.createNode('curveInfo', name='SCurveInfo')
cmds.rename(s_curve_info, 'SCurveInfo')
cmds.connectAttr(s_curve_shape + '.worldSpace[0]',
s_curve_info + '.inputCurve')
joint_scale = cmds.createNode('multiplyDivide', name='sJointScale')
cmds.setAttr(joint_scale + '.operation', 2)
cmds.setAttr(joint_scale + '.input2X', stretch_len)
cmds.connectAttr(s_curve_info + '.arcLength', joint_scale + '.input1X')
# connecting up nodes to bones
for joint in s_joints_collection:
cmds.connectAttr(joint_scale + '.outputX', joint + '.scaleX')
# creating a variable for the base wire of the wire deformer
s_base_wire = cmds.listConnections(s_wire_deform + ".baseWire",
destination=False,
source=True)[0]
# creating group inorder to help organisation and prevent double transforms
s_rig_grp = cmds.group(empty=True, name=prefix + 'stretchPlaneRigGrp')
align(start_joint, s_rig_grp)
cmds.parent(s_rig_grp, s_grp)
cmds.parent(s_plane[0], s_base_wire, start_loc, end_loc, s_rig_grp)
cmds.setAttr(start_w_joint + ".visibility", False)
cmds.setAttr(end_w_joint + ".visibility", False)
# Connecting end locators to driving joints -will have to do this properly in the main script
cmds.pointConstraint(end_joint, end_loc)
cmds.connectAttr(
end_joint + '.rotateZ', end_loc[0] +
'.rotateZ') # TODO: add if statment for elbow/wrist rotations
cmds.parent(s_rig_grp, start_joint)
return s_joints_collection
def createCtrlSys(crv,
rootCrv,
surface,
rootSurface,
name,
parameter=0.5,
iteration=1):
# Get surface shape
crv_shape = cmds.listRelatives(crv[0], type="shape")[0]
rootCrv_shape = cmds.listRelatives(rootCrv[0], type="shape")[0]
surface_shape = cmds.listRelatives(surface[0], type="shape")
rootSurface_shape = cmds.listRelatives(rootSurface[0], type="shape")
# create wire, cluster
wire = cmds.wire(surface,
gw=False,
en=1.0,
ce=0.0,
li=0.0,
dds=(0, 1000),
w=crv,
n=name + "_wire")[0]
newCluster = cmds.cluster(rootCrv[0] + '.cv[:]',
n="{}_{}_FreeSys_Crv_Clst".format(
name, iteration),
envelope=1)
# run dynamicClst script
cmds.select(rootCrv[0], r=1)
dynamicSys_data = tp_createDynamicClst()
cmds.select(cl=1)
# Get arc length
rootCrv_arcLength = cmds.arclen(rootCrv)
# Create control
ctrl_data = bd_buildCtrl(ctrl_type="sphere",
name="{}_{}".format(name, iteration),
sufix="_FreeSys_Ctrl",
offset=1)
# Create follicle on surface
follicle_data = createFollicle(inputSurface=rootSurface_shape,
name=name + '_FreeSys_Ctrl_Flc',
hide=0)
# Point constraint ctrl grp
cmds.pointConstraint(follicle_data[0],
ctrl_data[1],
offset=(0, 0, 0),
weight=1)
# Orient constroint ctrl
cmds.orientConstraint(follicle_data[0], ctrl_data[0], mo=1, weight=1)
# Create attributes on control - Division, Parameter, Twist, Interpotaion
cmds.addAttr(ctrl_data[0],
ln="customAttr",
nn="________",
at="enum",
en="Custom:",
keyable=True)
cmds.setAttr(ctrl_data[0] + ".customAttr", lock=1)
cmds.addAttr(ctrl_data[0],
ln="parameter",
nn="Parameter",
at="double",
min=0,
max=rootCrv_arcLength,
dv=(rootCrv_arcLength / 2),
keyable=True)
cmds.addAttr(ctrl_data[0],
ln="twist",
nn="Twist",
at="double",
min=-1000,
max=1000,
dv=0,
keyable=True)
cmds.addAttr(ctrl_data[0],
ln="interpolation",
nn="Interpolation",
at="long",
min=1,
max=6,
dv=4,
keyable=True)
cmds.connectAttr(ctrl_data[0] + ".interpolation",
dynamicSys_data[0] + ".interpolation")
# Create setRange for translate conversion 0 1
ctrl_setRange = cmds.shadingNode('setRange',
au=1,
n=name + '_ctrl_t_setRange')
cmds.setAttr(ctrl_setRange + '.max.maxX', 1)
cmds.setAttr(ctrl_setRange + '.oldMax.oldMaxX', rootCrv_arcLength)
cmds.connectAttr(ctrl_data[0] + '.parameter',
ctrl_setRange + '.value.valueX')
# Connect ctrl translate x to follicle uVlue
cmds.connectAttr(ctrl_setRange + '.outValue.outValueX',
follicle_data[1] + '.parameterU')
# Create set range for scale X, output max 0-1, control ramp falloff
scale_setRange = cmds.shadingNode('setRange',
au=1,
n=name + '_ctrl_scaleToFalloff_setRange')
cmds.setAttr(scale_setRange + '.oldMin.oldMinX', 0.2)
cmds.setAttr(scale_setRange + '.oldMax.oldMaxX', 5)
cmds.setAttr(scale_setRange + '.min.minX', 0.1)
cmds.setAttr(scale_setRange + '.max.maxX', 1)
cmds.connectAttr(ctrl_data[0] + '.scale.scaleX',
scale_setRange + '.value.valueX')
# Calcaulating start and end position
colorStart_mpDiv = cmds.shadingNode('multiplyDivide',
au=1,
n=name + '_scaleInvert_mpDivide')
colorStartEnd_plusMA = cmds.shadingNode('plusMinusAverage',
au=1,
n=name + '_falloffResult_plusMA')
# Invert Scale newRange value
cmds.setAttr(colorStart_mpDiv + '.input2.input2X', -1)
cmds.connectAttr(scale_setRange + '.outValue.outValueX',
colorStart_mpDiv + '.input1.input1X')
# Connect to plusMinusAvarege node
cmds.connectAttr(colorStart_mpDiv + '.output.outputX',
colorStartEnd_plusMA + '.input2D[0].input2Dx')
cmds.connectAttr(scale_setRange + '.outValue.outValueX',
colorStartEnd_plusMA + '.input2D[0].input2Dy')
cmds.connectAttr(ctrl_setRange + '.outValue.outValueX',
colorStartEnd_plusMA + '.input2D[1].input2Dx')
cmds.connectAttr(ctrl_setRange + '.outValue.outValueX',
colorStartEnd_plusMA + '.input2D[1].input2Dy')
# Create clamp setRange - Limiting calculation to 0 to 1
clamp_setRenge = cmds.shadingNode('setRange',
au=1,
n=name + '_resultClamp_setRange')
cmds.setAttr(clamp_setRenge + '.oldMax.oldMaxX', 1)
cmds.setAttr(clamp_setRenge + '.max.maxX', 1)
cmds.setAttr(clamp_setRenge + '.oldMax.oldMaxY', 1)
cmds.setAttr(clamp_setRenge + '.max.maxY', 1)
cmds.connectAttr(colorStartEnd_plusMA + '.output2D.output2Dx',
clamp_setRenge + '.value.valueX')
cmds.connectAttr(colorStartEnd_plusMA + '.output2D.output2Dy',
clamp_setRenge + '.value.valueY')
# Connect to ramp colors
# Connect and configure color 1 mid
cmds.connectAttr(ctrl_setRange + '.outValue.outValueX',
dynamicSys_data[0] + '.colorEntryList[0].position')
cmds.setAttr(dynamicSys_data[0] + '.colorEntryList[0].color',
1,
1,
1,
type="double3")
# Connect and configure color 0 start
cmds.connectAttr(clamp_setRenge + '.outValue.outValueX',
dynamicSys_data[0] + '.colorEntryList[2].position')
cmds.setAttr(dynamicSys_data[0] + '.colorEntryList[2].color',
0,
0,
0,
type="double3")
# Connect and configure color 2 end
cmds.connectAttr(clamp_setRenge + '.outValue.outValueY',
dynamicSys_data[0] + '.colorEntryList[1].position')
cmds.setAttr(dynamicSys_data[0] + '.colorEntryList[1].color',
0,
0,
0,
type="double3")
# Connect ctrl to cluster
cmds.connectAttr(ctrl_data[0] + '.translate', newCluster[1] + '.translate')
# Create and connect dropoff locators
cmds.select("{}.u[{}]".format(crv[0], 0), r=True)
dropoffLoc1 = cmds.dropoffLocator(1.0, 1.0, wire)[0]
cmds.select("{}.u[{}]".format(crv[0], 0.1), r=True)
dropoffLoc2 = cmds.dropoffLocator(1.0, 1.0, wire)[0]
cmds.select("{}.u[{}]".format(crv[0], 0.2), r=True)
dropoffLoc3 = cmds.dropoffLocator(1.0, 1.0, wire)[0]
cmds.select(cl=1)
cmds.connectAttr(ctrl_data[0] + ".twist",
"{}.wireLocatorTwist[{}]".format(wire, 1))
cmds.connectAttr(ctrl_setRange + '.outValue.outValueX',
dropoffLoc2 + '.param')
cmds.connectAttr(clamp_setRenge + '.outValue.outValueX',
dropoffLoc1 + '.param')
cmds.connectAttr(clamp_setRenge + '.outValue.outValueY',
dropoffLoc3 + '.param')
lock_hide([ctrl_data[0]], [".rx", ".ry", ".rz"])
# Set control parameter of choice
ctrl_tergetPosition = rootCrv_arcLength * parameter
cmds.setAttr(ctrl_data[0] + '.parameter', ctrl_tergetPosition)
# Group everything or pass creations to master grouper
return newCluster[1], ctrl_data[1], follicle_data[0], ctrl_data[0]
def createBaseCtrl(crv, surface, name, color1, color2):
# Wire surface to curve
wire = cmds.wire(surface,
gw=False,
en=1.0,
ce=0.0,
li=0.0,
dds=(0, 100),
w=crv,
n=name + "_wire")[0]
cmds.setAttr(wire + ".rotation", 0)
# Create clusters from all cv's on curve and relative dynamic systems
cluster_start = cmds.cluster(crv[0] + '.cv[:]',
n=name + '_Start_Crv_Clst',
envelope=1)
cmds.select(crv[0], r=1)
dynSys_start_data = tp_createDynamicClst()
cluster_end = cmds.cluster(crv[0] + '.cv[:]',
n=name + '_End_Crv_Clst',
envelope=1)
cmds.select(crv[0], r=1)
dynSys_end_data = tp_createDynamicClst()
# Adjust dynamic system ramp for start and end controls
adjustRamp(dynSys_start_data[0],
inPos=0,
outPos=1,
createMid=0,
inColor=1,
outColor=0)
adjustRamp(dynSys_end_data[0],
inPos=0,
outPos=1,
createMid=0,
inColor=0,
outColor=1)
# Create controls - get resulting return data
ctrl_start_data = bd_buildCtrl(ctrl_type="cube",
scale=2,
name=name + '_Start')
setCtrlColor(ctrl_start_data[0], color=color1)
ctrl_end_data = bd_buildCtrl(ctrl_type="cube", scale=2, name=name + '_End')
setCtrlColor(ctrl_end_data[0], color=color2)
# Get start and end point on curve positions
# Position ctrl groups at start and end
start_position = cmds.pointOnCurve(crv, pr=0, p=1)
end_position = cmds.pointOnCurve(crv, pr=1, p=1)
cmds.xform(ctrl_start_data[1], t=start_position)
cmds.xform(ctrl_end_data[1], t=end_position)
# Connect controls to clusters
# Leaving X rotation out - Will be controlled by wire dropoff locators
cmds.connectAttr(ctrl_start_data[0] + '.translate',
cluster_start[1] + '.translate')
cmds.connectAttr(ctrl_start_data[0] + '.rotate.rotateY',
cluster_start[1] + '.rotate.rotateY')
cmds.connectAttr(ctrl_start_data[0] + '.rotate.rotateZ',
cluster_start[1] + '.rotate.rotateZ')
cmds.connectAttr(ctrl_end_data[0] + '.translate',
cluster_end[1] + '.translate')
cmds.connectAttr(ctrl_end_data[0] + '.rotate.rotateY',
cluster_end[1] + '.rotate.rotateY')
cmds.connectAttr(ctrl_end_data[0] + '.rotate.rotateZ',
cluster_end[1] + '.rotate.rotateZ')
# Add interpolation control attribute to start/end control
cmds.addAttr(ctrl_start_data[0],
ln="customAttr",
nn="________",
at="enum",
en="Custom:",
keyable=True)
cmds.setAttr(ctrl_start_data[0] + ".customAttr", lock=1)
cmds.addAttr(ctrl_start_data[0],
ln="interpolation",
nn="Interpolation",
at="long",
min=1,
max=6,
dv=1,
keyable=True)
cmds.connectAttr(ctrl_start_data[0] + ".interpolation",
dynSys_start_data[0] + ".interpolation")
cmds.addAttr(ctrl_end_data[0],
ln="customAttr",
nn="________",
at="enum",
en="Custom:",
keyable=True)
cmds.setAttr(ctrl_end_data[0] + ".customAttr", lock=1)
cmds.addAttr(ctrl_end_data[0],
ln="interpolation",
nn="Interpolation",
at="long",
min=1,
max=6,
dv=1,
keyable=True)
cmds.connectAttr(ctrl_end_data[0] + ".interpolation",
dynSys_end_data[0] + ".interpolation")
# Ends rotation control
# Create dropoff locators - start end
# Connect to controls rotation
cmds.select("{}.u[{}]".format(crv[0], 0), r=True)
dropoffLoc_start = cmds.dropoffLocator(1.0, 1.0, wire)[0]
cmds.connectAttr(ctrl_start_data[0] + ".rx",
"{}.wireLocatorTwist[{}]".format(wire, 0))
cmds.select("{}.u[{}]".format(crv[0], 1), r=True)
dropoffLoc_end = cmds.dropoffLocator(1.0, 1.0, wire)[0]
cmds.connectAttr(ctrl_end_data[0] + ".rx",
"{}.wireLocatorTwist[{}]".format(wire, 1))
# return [0] ctrl 1 transform, [1] ctrl 1 grp, [2] ctrl 2 transform, [3] ctrl 2 grps, [4] cluster 1, [5] cluster 2
return ctrl_start_data[0], ctrl_start_data[1], ctrl_end_data[
0], ctrl_end_data[1], cluster_start, cluster_end
def ribbonize(surf_tr,
equal=1,
num_of_ctrls=5,
num_of_jnts=29,
prefix="",
constrain=1,
add_fk=0,
wire=0):
attrs = [
".tx", ".ty", ".tz", ".rx", ".ry", ".rz", ".sx", ".sy", ".sz", ".v"
]
if prefix == "":
mc.warning("te importa nombrarlo?")
return
else:
prefix = prefix + "_"
#####################################################
surf_tr = mc.rename(surf_tr, prefix + "ribbon_surface")
surf = mc.listRelatives(surf_tr, shapes=True)[0]
# Congelar transformaciones y borrar el historial de superficies.
mc.makeIdentity(surf_tr, t=True, r=True, s=True, apply=True)
mc.delete(surf_tr, ch=True)
# duplicar la superficie curvas para determinar la direccion.
u_curve = mc.duplicateCurve(surf_tr + ".v[.5]", local=True, ch=0)
v_curve = mc.duplicateCurve(surf_tr + ".u[.5]", local=True, ch=0)
# borro historial solo porsiaca.
mc.delete(surf_tr, ch=True)
u_length = mc.arclen(u_curve)
v_length = mc.arclen(v_curve)
if u_length < v_length:
mc.reverseSurface(surf_tr, d=3, ch=False, rpo=True)
mc.reverseSurface(surf_tr, d=0, ch=False, rpo=True)
parameter = ".parameterU"
other_param = ".parameterV"
# corrija u_curve despues de invertir para calcular la longitud.
u_curve_corr = mc.duplicateCurve(surf_tr + ".v[.5]", local=True, ch=0)[0]
#############################################################################
# La superficie seleccionada es periodica o abierta? (cilindro o plano)
if mc.getAttr(surf + ".formU") == 2 or mc.getAttr(surf + ".formV") == 2:
curve_type = "periodic"
divider_for_ctrls = num_of_ctrls
elif mc.getAttr(surf + ".formU") == 0 or mc.getAttr(surf + ".formV") == 0:
curve_type = "open"
divider_for_ctrls = num_of_ctrls - 1
#############################################################################
param_ctrls = param_from_length(u_curve_corr, num_of_ctrls, curve_type,
"uv")
param_joints = param_from_length(u_curve_corr, num_of_jnts, curve_type,
"uv")
length = mc.arclen(u_curve_corr)
mc.delete(u_curve, v_curve, u_curve_corr)
############################################################################
# Creo grupos, Control General y control general de offset
final_group = mc.group(n=prefix + "ribbon_grp", em=True)
ctrl_joints_grp = mc.group(n=prefix + "ctrl_joints_grp", em=True)
ctrl_grp = mc.group(n=prefix + "ctrls_grp", em=True)
follicles_grp = mc.group(n=prefix + "follicles_grp", em=True)
rig_grp = mc.group(n=prefix + "rig_grp", em=True)
main_ctrl = mc.circle(n=prefix + "ctrl_main",
nr=(0, 1, 0),
r=length / 5,
ch=0)[0]
main_ctrl_offset = mc.group(n=prefix + "ctrl_main_offset", em=True)
mc.parent(main_ctrl, main_ctrl_offset)
mc.parent(ctrl_grp, main_ctrl)
mc.parent(main_ctrl_offset, rig_grp, final_group)
mc.parent(surf_tr, ctrl_joints_grp, follicles_grp, rig_grp)
# Muevo main_ctrl_offset al centro de la geometria bbox (en caso de que el pivote este en otro lugar)
mid_point = get_bbox_center(surf_tr)
for attr, mid_pnt_el in izip(attrs[:3], mid_point):
mc.setAttr(main_ctrl_offset + attr, mid_pnt_el)
############################################################################
fols = []
fols_tr = []
bind_jnts = []
bnd_joints_rad = (length / 60) / (float(num_of_jnts) / 40)
for x in range(num_of_jnts):
fol = mc.createNode("follicle")
mc.setAttr(fol + ".visibility", 0)
temp_fol = mc.listRelatives(fol, p=True)[0]
fols_tr.append(
mc.rename(temp_fol, "{}follicle_{:02d}".format(prefix, x + 1)))
fols.append(mc.listRelatives(fols_tr[-1], s=True)[0])
# conecto follicle shapes al transform
mc.connectAttr(fols[-1] + ".outTranslate",
fols_tr[-1] + ".translate",
f=True)
mc.connectAttr(fols[-1] + ".outRotate",
fols_tr[-1] + ".rotate",
f=True)
# atacho follicle shapes a la superficie
mc.connectAttr(surf + ".worldMatrix[0]",
fols[-1] + ".inputWorldMatrix")
mc.connectAttr(surf + ".local", fols[-1] + ".inputSurface")
mc.setAttr(fols[-1] + parameter, param_joints[x])
mc.setAttr(fols[-1] + other_param, 0.5)
mc.parent(fols_tr[-1], follicles_grp)
# creo el bind final y joints en la superficie
bind_jnts.append(
mc.createNode("joint", n="{}bnd_jnt_{:02d}".format(prefix, x + 1)))
mc.parent(bind_jnts[-1], fols_tr[-1], r=True)
mc.setAttr(bind_jnts[-1] + ".radius", bnd_joints_rad)
set_color(bind_jnts, "mid_blue")
#creo un temporal follicles para controles offset groups para alinear
temp_fols = []
temp_fols_tr = []
for x in range(num_of_ctrls):
temp_fols.append(mc.createNode("follicle"))
temp_fols_tr.append(mc.listRelatives(temp_fols[-1], p=True)[0])
mc.connectAttr(temp_fols[-1] + ".outTranslate",
temp_fols_tr[-1] + ".translate",
f=True)
mc.connectAttr(temp_fols[-1] + ".outRotate",
temp_fols_tr[-1] + ".rotate",
f=True)
mc.connectAttr(surf + ".worldMatrix[0]",
temp_fols[-1] + ".inputWorldMatrix")
mc.connectAttr(surf + ".local", temp_fols[-1] + ".inputSurface")
####################################################
if equal == 1:
for x, temp_fol in enumerate(temp_fols):
mc.setAttr(temp_fol + parameter, param_ctrls[x])
mc.setAttr(temp_fol + other_param, 0.5)
if equal == 0:
v = 0
for temp_fol in temp_fols:
mc.setAttr(temp_fol + parameter, v)
mc.setAttr(temp_fol + other_param, 0.5)
v = v + (1.0 / divider_for_ctrls)
####################################################
#creo controles y controle para joints
controls = ctrl_maker(prefix,
ctrl_type="cube",
count=num_of_ctrls,
deg=3,
sp=8)
ctrl_ofs_grps = []
ctrl_joints = []
ctrl_jnt_ofs_grps = []
ctrl_joints_rad = bnd_joints_rad * 2
ik_ctrl_scale = (length / 35) / (float(num_of_ctrls) / 5)
for x, ctrl in enumerate(controls):
ctrl_ofs_grp = mc.group(ctrl, n="{}_offset".format(ctrl))
mc.delete(mc.parentConstraint(temp_fols_tr[x], ctrl_ofs_grp))
ctrl_ofs_grps.append(ctrl_ofs_grp)
#escala ik controls
ctrl_shapes = mc.listRelatives(ctrl, s=True)
for ctrl_shape in ctrl_shapes:
ctrl_cvs_count = mc.getAttr(ctrl_shape + ".controlPoints",
size=True)
mc.scale(ik_ctrl_scale,
ik_ctrl_scale,
ik_ctrl_scale,
"{}.cv[0:{}]".format(ctrl_shape, ctrl_cvs_count - 1),
r=True,
ocp=True)
#creo los controles de joints
ctrl_joints.append(
mc.createNode("joint", n="{}ctrl_jnt_{:02d}".format(prefix,
x + 1)))
#seteo el radio de controles para joints de 2 tiepos. de el surface y joints
mc.setAttr(ctrl_joints[x] + ".radius", ctrl_joints_rad)
#creo offset groups para cotroles de joints
ctrl_jnt_ofs_grp = mc.group(ctrl_joints[-1],
n="{}_offset".format(ctrl_joints[-1]))
mc.delete(mc.parentConstraint(temp_fols_tr[x], ctrl_jnt_ofs_grp))
ctrl_jnt_ofs_grps.append(ctrl_jnt_ofs_grp)
###
set_color(controls, "green")
set_color(ctrl_joints, "red")
mc.parent(ctrl_ofs_grps, ctrl_grp)
mc.parent(ctrl_jnt_ofs_grps, ctrl_joints_grp)
lock_hide(ctrl_ofs_grps, attrs[:9])
lock_hide(ctrl_jnt_ofs_grps, attrs[:9])
mc.delete(temp_fols_tr)
####################################################
#determino que constraint o coneccion o metodo es elegido# que formalidad
if constrain == 0:
for (c, j) in izip(controls, ctrl_joints):
for attr in attrs[:7]: #skip de la escala de atributos
mc.connectAttr(c + attr, j + attr)
mc.parentConstraint(main_ctrl, ctrl_joints_grp, mo=True)
mc.scaleConstraint(main_ctrl, ctrl_joints_grp)
#escala del foliculo con el main // por coneccion del editor
for flt in fols_tr:
mc.connectAttr(main_ctrl + ".sx", flt + ".sx")
mc.connectAttr(main_ctrl + ".sx", flt + ".sy")
mc.connectAttr(main_ctrl + ".sx", flt + ".sz")
elif constrain == 1:
for (c, j) in izip(controls, ctrl_joints):
mc.parentConstraint(c, j)
mc.scaleConstraint(c, j)
#scala del folliculos con el main control
for flt in fols_tr:
mc.scaleConstraint(main_ctrl, flt)
#######################################################################
if wire == True and num_of_ctrls > 1:
temp_crv = mc.duplicateCurve(surf_tr + ".v[.5]",
n=prefix + "wire_crv",
local=False,
ch=0)[0]
if num_of_ctrls == 2:
degree = 1
else:
degree = 3
wire_crv = mc.curve(p=param_from_length(
temp_crv, num_of_ctrls + (num_of_ctrls - 1), "open", "world"),
d=degree)
mc.delete(temp_crv)
wire_crv = mc.rename(
wire_crv, prefix + "wire_crv"
) # Si el nombre va en el momento de la creacion, la forma no se renombra
mc.delete(wire_crv, ch=True)
wire = mc.wire(surf_tr,
gw=False,
en=1.0,
ce=0.0,
li=0.0,
dds=(0, 50),
w=wire_crv,
n=prefix + "wire")[0]
mc.connectAttr(main_ctrl + ".sx", wire + ".scale[0]")
cps = param_from_length(wire_crv,
num_of_ctrls,
"open",
"uv",
normalized=False)
for cp in cps:
mc.select("{}.u[{}]".format(wire_crv, cp), r=True)
mc.dropoffLocator(1.0, 1.0, wire)
mc.select(cl=True)
for x, ctrl in enumerate(controls):
mc.connectAttr(ctrl + ".rx",
"{}.wireLocatorTwist[{}]".format(wire, x))
wire_grp = mc.group(wire_crv,
wire_crv + "BaseWire",
n=prefix + "wire_crv_grp")
mc.parent(wire_grp, rig_grp)
lock_hide([wire_grp], attrs[:9])
wire_skin_cluster = mc.skinCluster(ctrl_joints,
wire_crv,
dr=2,
mi=2,
bm=0)[0]
else:
#bind de la superficie a los joints
nurbs_skin_cluster = mc.skinCluster(ctrl_joints,
surf_tr,
dr=2,
mi=num_of_ctrls - 1,
ns=num_of_ctrls * 5,
bm=0,
n=prefix + "skinCluster")[0]
mc.skinPercent(nurbs_skin_cluster, surf_tr, pruneWeights=0.2)
if wire == True and num_of_ctrls == 1:
mc.warning("wire skipped. at least 2 controls needed")
##########################################################################################
mc.setAttr(surf_tr + ".v", 0)
mc.setAttr(rig_grp + ".v", 0)
mc.connectAttr(main_ctrl + ".sx", main_ctrl + ".sy")
mc.connectAttr(main_ctrl + ".sx", main_ctrl + ".sz")
mc.aliasAttr("Scale", main_ctrl + ".sx")
set_color(main_ctrl, "yellow")
mc.connectAttr(main_ctrl_offset + ".sx", main_ctrl_offset + ".sy")
mc.connectAttr(main_ctrl_offset + ".sx", main_ctrl_offset + ".sz")
mc.aliasAttr("Scale", main_ctrl_offset + ".sx")
#lock and hide atributos
lock_hide([
final_group, follicles_grp, ctrl_joints_grp, surf_tr, ctrl_grp, rig_grp
], attrs[:9])
lock_hide([ctrl_grp, main_ctrl, main_ctrl_offset], attrs[7:])
lock_hide(controls, attrs[7:])
#limpiamos seleccion (clear selection)
mc.select(
cl=True
) #Si la seleccion no se borra, se agrega un bind de control al conjunto de bind de enlace
#crea a set con bind joints
bind_jnts_set = mc.sets(n=prefix + "bind_jnts_set")
mc.sets(bind_jnts, add=bind_jnts_set)
mc.select(cl=True)
ik_ctrls_set = mc.sets(n=prefix + "ik_ctrls_set")
mc.sets(controls, add=ik_ctrls_set)
mc.select(cl=True)
controls_set = mc.sets(n=prefix + "controls_set")
mc.sets(main_ctrl, ik_ctrls_set, add=controls_set)
##########################################################################################
if add_fk == 1 and mc.getAttr(surf + ".formU") != 2 and mc.getAttr(
surf + ".formV") != 2:
fk_ctrls, fk_ctrl_off_grps = make_fk_ctrls(prefix, num_of_ctrls)
mc.parent(fk_ctrl_off_grps[0], ctrl_grp)
#scala fk controls
fk_ctrl_scale = ik_ctrl_scale * 2
for fk_ctrl in fk_ctrls:
fk_ctrl_shapes = mc.listRelatives(fk_ctrl, s=True)
for fk_ctrl_shape in fk_ctrl_shapes:
fk_ctrl_cvs_count = mc.getAttr(fk_ctrl_shape +
".controlPoints",
size=True)
mc.scale(fk_ctrl_scale,
fk_ctrl_scale,
fk_ctrl_scale,
"{}.cv[0:{}]".format(fk_ctrl_shape,
fk_ctrl_cvs_count - 1),
r=True,
ocp=True)
#add fk controls al set
mc.select(cl=True)
fk_ctrls_set = mc.sets(n=prefix + "fk_ctrls_set")
mc.sets(fk_ctrls, add=fk_ctrls_set)
########
ik_ctrl_constr_grps = [
mc.group(ctrl, n=ctrl + "_constr_grp") for ctrl in controls
]
[
mc.xform(ik_ctrl_constr_grp, piv=(0, 0, 0), os=True)
for ik_ctrl_constr_grp in ik_ctrl_constr_grps
]
for ik, fk in izip(controls[:-1], fk_ctrl_off_grps):
mc.delete(mc.parentConstraint(ik, fk))
for fk, ik in izip(fk_ctrls, ik_ctrl_constr_grps[:-1]):
mc.parentConstraint(fk, ik)
#constrain ultimo ik ctrl
mc.parentConstraint(fk_ctrls[-1], ik_ctrl_constr_grps[-1], mo=True)
lock_hide(ik_ctrl_constr_grps, attrs[:9])
########
set_color(fk_ctrls, "blue")
lock_hide(fk_ctrl_off_grps, attrs[:9])
mc.sets(fk_ctrls_set, add=controls_set)
mc.select(cl=True)
elif add_fk == 1 and (mc.getAttr(surf + ".formU") == 2
or mc.getAttr(surf + ".formV") == 2):
mc.warning("surface is periodic. fk controls skipped")
################ ADD mensaje de atributo ################
mc.addAttr(main_ctrl, ln="joints", at="message")
mc.addAttr(main_ctrl, ln="follicles", at="message")
mc.addAttr(main_ctrl, ln="surface", at="message")
if mc.attributeQuery("i_am_the_surface", node=surf, exists=True) == False:
mc.addAttr(surf, ln="i_am_the_surface", at="message")
mc.connectAttr(main_ctrl + ".surface", surf + ".i_am_the_surface")
for j, f in izip(bind_jnts, fols):
mc.addAttr(j, ln="i_am_a_joint", at="message")
mc.addAttr(f, ln="i_am_a_follicle", at="message")
mc.connectAttr(main_ctrl + ".joints", j + ".i_am_a_joint")
mc.connectAttr(main_ctrl + ".follicles", f + ".i_am_a_follicle")
def rebuild(self):
'''
Rebuild the wire deformer from the recorded deformerData
'''
# Rebuild deformer
wire = super(WireData, self).rebuild()
# Check Wire Curves
for curve in self.influenceData.iterkeys():
if not mc.objExists(curve):
pts = self.influenceData[curve]['cvList']
knots = self.influenceData[curve]['knots']
degree = self.influenceData[curve]['degree']
mc.curve(p=pts, k=knots, d=degree, n=curve)
# Check Base Curves
for curve in self.influenceBaseData.iterkeys():
if not mc.objExists(curve):
pts = self.influenceBaseData[curve]['cvList']
knots = self.influenceBaseData[curve]['knots']
degree = self.influenceBaseData[curve]['degree']
curve = mc.curve(p=pts, k=knots, d=degree, n=curve)
mc.setAttr(curve + '.v', 0)
# Check Dropoff Locators
for locator in self.dropoffLocatorData.iterkeys():
if mc.objExists(self.dropoffLocatorData[locator]['parent']):
mc.delete(self.dropoffLocatorData[locator]['parent'])
# Set Deformer Attributes
mc.setAttr(wire + '.crossingEffect', self.crossingEffect)
mc.setAttr(wire + '.tension', self.tension)
mc.setAttr(wire + '.localInfluence', self.localInfluence)
mc.setAttr(wire + '.rotation', self.rotation)
# Connect wire curves
for curve in self.influenceData.iterkeys():
mc.connectAttr(curve + '.worldSpace[0]',
wire + '.deformedWire[' +
str(self.influenceData[curve]['index']) + ']',
f=True)
# Connect base curves
for curve in self.influenceBaseData.iterkeys():
mc.connectAttr(curve + '.worldSpace[0]',
wire + '.baseWire[' +
str(self.influenceBaseData[curve]['index']) + ']',
f=True)
# Set Influence Attributes
for influence in self.influenceData.iterkeys():
infIndex = self.influenceData[influence]['index']
mc.setAttr(wire + '.dropoffDistance[' + str(infIndex) + ']',
self.influenceData[influence]['dropoff'])
mc.setAttr(wire + '.scale[' + str(infIndex) + ']',
self.influenceData[influence]['scale'])
# Recreate Dropoff Locators
for locator in self.dropoffLocatorData.iterkeys():
locIndex = self.dropoffLocatorData[locator]['index']
param = self.dropoffLocatorData[locator]['parameter']
parent = self.dropoffLocatorData[locator]['parent']
env = self.dropoffLocatorData[locator]['envelope']
percent = self.dropoffLocatorData[locator]['percent']
mc.select(parent + '.u[' + str(param) + ']')
newLoc = mc.dropoffLocator(env, percent, wire)
mc.setAttr(wire + '.wireLocatorTwist[' + str(locIndex) + ']',
self.dropoffLocatorData[locator]['twist'])
if parent != newLoc: newLoc = mc.rename(newLoc, parent)
locShape = mc.listRelatives(newLoc, s=True, ni=True)[0]
if locator != locShape: locator = mc.rename(locShape, locator)
# Return result
return wire
def rebuild(self): ''' Rebuild the wire deformer from the recorded deformerData ''' # Rebuild deformer wire = super(WireData, self).rebuild() # Check Wire Curves for curve in self.influenceData.iterkeys(): if not mc.objExists(curve): pts = self.influenceData[curve]['cvList'] knots = self.influenceData[curve]['knots'] degree = self.influenceData[curve]['degree'] mc.curve(p=pts,k=knots,d=degree,n=curve) # Check Base Curves for curve in self.influenceBaseData.iterkeys(): if not mc.objExists(curve): pts = self.influenceBaseData[curve]['cvList'] knots = self.influenceBaseData[curve]['knots'] degree = self.influenceBaseData[curve]['degree'] curve = mc.curve(p=pts,k=knots,d=degree,n=curve) mc.setAttr(curve+'.v',0) # Check Dropoff Locators for locator in self.dropoffLocatorData.iterkeys(): if mc.objExists(self.dropoffLocatorData[locator]['parent']): mc.delete(self.dropoffLocatorData[locator]['parent']) # Set Deformer Attributes mc.setAttr(wire+'.crossingEffect',self.crossingEffect) mc.setAttr(wire+'.tension',self.tension) mc.setAttr(wire+'.localInfluence',self.localInfluence) mc.setAttr(wire+'.rotation',self.rotation) # Connect wire curves for curve in self.influenceData.iterkeys(): mc.connectAttr(curve+'.worldSpace[0]',wire+'.deformedWire['+str(self.influenceData[curve]['index'])+']',f=True) # Connect base curves for curve in self.influenceBaseData.iterkeys(): mc.connectAttr(curve+'.worldSpace[0]',wire+'.baseWire['+str(self.influenceBaseData[curve]['index'])+']',f=True) # Set Influence Attributes for influence in self.influenceData.iterkeys(): infIndex = self.influenceData[influence]['index'] mc.setAttr(wire+'.dropoffDistance['+str(infIndex)+']',self.influenceData[influence]['dropoff']) mc.setAttr(wire+'.scale['+str(infIndex)+']',self.influenceData[influence]['scale']) # Recreate Dropoff Locators for locator in self.dropoffLocatorData.iterkeys(): locIndex = self.dropoffLocatorData[locator]['index'] param = self.dropoffLocatorData[locator]['parameter'] parent = self.dropoffLocatorData[locator]['parent'] env = self.dropoffLocatorData[locator]['envelope'] percent = self.dropoffLocatorData[locator]['percent'] mc.select(parent+'.u['+str(param)+']') newLoc = mc.dropoffLocator(env,percent,wire) mc.setAttr(wire+'.wireLocatorTwist['+str(locIndex)+']',self.dropoffLocatorData[locator]['twist']) if parent != newLoc: newLoc = mc.rename(newLoc,parent) locShape = mc.listRelatives(newLoc,s=True,ni=True)[0] if locator != locShape: locator = mc.rename(locShape,locator) # Return result return wire
def ribbonize(surf_tr,
equal=1,
num_of_ctrls=5,
num_of_jnts=29,
prefix="",
constrain=1,
add_fk=0,
wire=0):
attrs = [
".tx", ".ty", ".tz", ".rx", ".ry", ".rz", ".sx", ".sy", ".sz", ".v"
]
if prefix == "":
mc.warning("care to name it?")
return
else:
prefix = prefix + "_"
#####################################################
surf_tr = mc.rename(surf_tr, prefix + "ribbon_surface")
surf = mc.listRelatives(surf_tr, shapes=True)[0]
# freeze transformations and delete the surface history
mc.makeIdentity(surf_tr, t=True, r=True, s=True, apply=True)
mc.delete(surf_tr, ch=True)
# duplicate surface curves to determine the direction
u_curve = mc.duplicateCurve(surf_tr + ".v[.5]", local=True, ch=0)
v_curve = mc.duplicateCurve(surf_tr + ".u[.5]", local=True, ch=0)
# delete the history just in case
mc.delete(surf_tr, ch=True)
u_length = mc.arclen(u_curve)
v_length = mc.arclen(v_curve)
if u_length < v_length:
mc.reverseSurface(surf_tr, d=3, ch=False, rpo=True)
mc.reverseSurface(surf_tr, d=0, ch=False, rpo=True)
parameter = ".parameterU"
other_param = ".parameterV"
# correct u_curve after reversing to calculate the length
u_curve_corr = mc.duplicateCurve(surf_tr + ".v[.5]", local=True, ch=0)[0]
#############################################################################
# selected surface is periodic or open? (cylinder or a plane)
if mc.getAttr(surf + ".formU") == 2 or mc.getAttr(surf + ".formV") == 2:
curve_type = "periodic"
divider_for_ctrls = num_of_ctrls
elif mc.getAttr(surf + ".formU") == 0 or mc.getAttr(surf + ".formV") == 0:
curve_type = "open"
divider_for_ctrls = num_of_ctrls - 1
#############################################################################
param_ctrls = param_from_length(u_curve_corr, num_of_ctrls, curve_type,
"uv")
param_joints = param_from_length(u_curve_corr, num_of_jnts, curve_type,
"uv")
length = mc.arclen(u_curve_corr)
mc.delete(u_curve, v_curve, u_curve_corr)
############################################################################
# create groups, main control and main control offset
final_group = mc.group(n=prefix + "ribbon_grp", em=True)
ctrl_joints_grp = mc.group(n=prefix + "ctrl_joints_grp", em=True)
ctrl_grp = mc.group(n=prefix + "ctrls_grp", em=True)
follicles_grp = mc.group(n=prefix + "follicles_grp", em=True)
rig_grp = mc.group(n=prefix + "rig_grp", em=True)
main_ctrl = mc.circle(n=prefix + "ctrl_main",
nr=(0, 1, 0),
r=length / 5,
ch=0)[0]
main_ctrl_offset = mc.group(n=prefix + "ctrl_main_offset", em=True)
mc.parent(main_ctrl, main_ctrl_offset)
mc.parent(ctrl_grp, main_ctrl)
mc.parent(main_ctrl_offset, rig_grp, final_group)
mc.parent(surf_tr, ctrl_joints_grp, follicles_grp, rig_grp)
# move main_ctrl_offset to the center of the surfaces bbox (in case its pivot is somewhere else)
mid_point = get_bbox_center(surf_tr)
for attr, mid_pnt_el in izip(attrs[:3], mid_point):
mc.setAttr(main_ctrl_offset + attr, mid_pnt_el)
############################################################################
fols = []
fols_tr = []
bind_jnts = []
bnd_joints_rad = (length / 60) / (float(num_of_jnts) / 40)
for x in range(num_of_jnts):
fol = mc.createNode("follicle")
mc.setAttr(fol + ".visibility", 0)
temp_fol = mc.listRelatives(fol, p=True)[0]
fols_tr.append(
mc.rename(temp_fol, "{}follicle_{:02d}".format(prefix, x + 1)))
fols.append(mc.listRelatives(fols_tr[-1], s=True)[0])
# connect follicle shapes to their transforms
mc.connectAttr(fols[-1] + ".outTranslate",
fols_tr[-1] + ".translate",
f=True)
mc.connectAttr(fols[-1] + ".outRotate",
fols_tr[-1] + ".rotate",
f=True)
# attach follicle shapes to the surface
mc.connectAttr(surf + ".worldMatrix[0]",
fols[-1] + ".inputWorldMatrix")
mc.connectAttr(surf + ".local", fols[-1] + ".inputSurface")
mc.setAttr(fols[-1] + parameter, param_joints[x])
mc.setAttr(fols[-1] + other_param, 0.5)
mc.parent(fols_tr[-1], follicles_grp)
# create final bind joints on the surface
bind_jnts.append(
mc.createNode("joint", n="{}bnd_jnt_{:02d}".format(prefix, x + 1)))
mc.parent(bind_jnts[-1], fols_tr[-1], r=True)
mc.setAttr(bind_jnts[-1] + ".radius", bnd_joints_rad)
set_color(bind_jnts, "mid_blue")
#create temp follicles for control offset groups to align
temp_fols = []
temp_fols_tr = []
for x in range(num_of_ctrls):
temp_fols.append(mc.createNode("follicle"))
temp_fols_tr.append(mc.listRelatives(temp_fols[-1], p=True)[0])
mc.connectAttr(temp_fols[-1] + ".outTranslate",
temp_fols_tr[-1] + ".translate",
f=True)
mc.connectAttr(temp_fols[-1] + ".outRotate",
temp_fols_tr[-1] + ".rotate",
f=True)
mc.connectAttr(surf + ".worldMatrix[0]",
temp_fols[-1] + ".inputWorldMatrix")
mc.connectAttr(surf + ".local", temp_fols[-1] + ".inputSurface")
####################################################
if equal == 1:
for x, temp_fol in enumerate(temp_fols):
mc.setAttr(temp_fol + parameter, param_ctrls[x])
mc.setAttr(temp_fol + other_param, 0.5)
if equal == 0:
v = 0
for temp_fol in temp_fols:
mc.setAttr(temp_fol + parameter, v)
mc.setAttr(temp_fol + other_param, 0.5)
v = v + (1.0 / divider_for_ctrls)
####################################################
#create controls and control joints
controls = ctrl_maker(prefix,
ctrl_type="cube",
count=num_of_ctrls,
deg=3,
sp=8)
ctrl_ofs_grps = []
ctrl_joints = []
ctrl_jnt_ofs_grps = []
ctrl_joints_rad = bnd_joints_rad * 2
ik_ctrl_scale = (length / 35) / (float(num_of_ctrls) / 5)
for x, ctrl in enumerate(controls):
ctrl_ofs_grp = mc.group(ctrl, n="{}_offset".format(ctrl))
mc.delete(mc.parentConstraint(temp_fols_tr[x], ctrl_ofs_grp))
ctrl_ofs_grps.append(ctrl_ofs_grp)
#scale ik controls
ctrl_shapes = mc.listRelatives(ctrl, s=True)
for ctrl_shape in ctrl_shapes:
ctrl_cvs_count = mc.getAttr(ctrl_shape + ".controlPoints",
size=True)
mc.scale(ik_ctrl_scale,
ik_ctrl_scale,
ik_ctrl_scale,
"{}.cv[0:{}]".format(ctrl_shape, ctrl_cvs_count - 1),
r=True,
ocp=True)
#create the control joints
ctrl_joints.append(
mc.createNode("joint", n="{}ctrl_jnt_{:02d}".format(prefix,
x + 1)))
#set the radius of controls joints to 2 times that of the surface joints
mc.setAttr(ctrl_joints[x] + ".radius", ctrl_joints_rad)
#create offset groups for ctrl joints
ctrl_jnt_ofs_grp = mc.group(ctrl_joints[-1],
n="{}_offset".format(ctrl_joints[-1]))
mc.delete(mc.parentConstraint(temp_fols_tr[x], ctrl_jnt_ofs_grp))
ctrl_jnt_ofs_grps.append(ctrl_jnt_ofs_grp)
###
set_color(controls, "green")
set_color(ctrl_joints, "red")
mc.parent(ctrl_ofs_grps, ctrl_grp)
mc.parent(ctrl_jnt_ofs_grps, ctrl_joints_grp)
lock_hide(ctrl_ofs_grps, attrs[:9])
lock_hide(ctrl_jnt_ofs_grps, attrs[:9])
mc.delete(temp_fols_tr)
####################################################
#determine if constraint or connection method is chosen
if constrain == 0:
for (c, j) in izip(controls, ctrl_joints):
for attr in attrs[:7]: #skip scale attributes
mc.connectAttr(c + attr, j + attr)
mc.parentConstraint(main_ctrl, ctrl_joints_grp, mo=True)
mc.scaleConstraint(main_ctrl, ctrl_joints_grp)
#scale the follicles with the main control
for flt in fols_tr:
mc.connectAttr(main_ctrl + ".sx", flt + ".sx")
mc.connectAttr(main_ctrl + ".sx", flt + ".sy")
mc.connectAttr(main_ctrl + ".sx", flt + ".sz")
elif constrain == 1:
for (c, j) in izip(controls, ctrl_joints):
mc.parentConstraint(c, j)
mc.scaleConstraint(c, j)
#scale the follicles with the main control
for flt in fols_tr:
mc.scaleConstraint(main_ctrl, flt)
#######################################################################
if wire == True and num_of_ctrls > 1:
temp_crv = mc.duplicateCurve(surf_tr + ".v[.5]",
n=prefix + "wire_crv",
local=False,
ch=0)[0]
if num_of_ctrls == 2:
degree = 1
else:
degree = 3
wire_crv = mc.curve(p=param_from_length(
temp_crv, num_of_ctrls + (num_of_ctrls - 1), "open", "world"),
d=degree)
mc.delete(temp_crv)
wire_crv = mc.rename(
wire_crv, prefix + "wire_crv"
) # if name at the creation time, the shape doesn't get renamed
mc.delete(wire_crv, ch=True)
wire = mc.wire(surf_tr,
gw=False,
en=1.0,
ce=0.0,
li=0.0,
dds=(0, 50),
w=wire_crv,
n=prefix + "wire")[0]
mc.connectAttr(main_ctrl + ".sx", wire + ".scale[0]")
cps = param_from_length(wire_crv,
num_of_ctrls,
"open",
"uv",
normalized=False)
for cp in cps:
mc.select("{}.u[{}]".format(wire_crv, cp), r=True)
mc.dropoffLocator(1.0, 1.0, wire)
mc.select(cl=True)
for x, ctrl in enumerate(controls):
mc.connectAttr(ctrl + ".rx",
"{}.wireLocatorTwist[{}]".format(wire, x))
wire_grp = mc.group(wire_crv,
wire_crv + "BaseWire",
n=prefix + "wire_crv_grp")
mc.parent(wire_grp, rig_grp)
lock_hide([wire_grp], attrs[:9])
wire_skin_cluster = mc.skinCluster(ctrl_joints,
wire_crv,
dr=2,
mi=2,
bm=0)[0]
else:
#bind the surface to the joints
nurbs_skin_cluster = mc.skinCluster(ctrl_joints,
surf_tr,
dr=2,
mi=num_of_ctrls - 1,
ns=num_of_ctrls * 5,
bm=0,
n=prefix + "skinCluster")[0]
mc.skinPercent(nurbs_skin_cluster, surf_tr, pruneWeights=0.2)
if wire == True and num_of_ctrls == 1:
mc.warning("wire skipped. at least 2 controls needed")
##########################################################################################
mc.setAttr(surf_tr + ".v", 0)
mc.setAttr(rig_grp + ".v", 0)
mc.connectAttr(main_ctrl + ".sx", main_ctrl + ".sy")
mc.connectAttr(main_ctrl + ".sx", main_ctrl + ".sz")
mc.aliasAttr("Scale", main_ctrl + ".sx")
set_color(main_ctrl, "yellow")
mc.connectAttr(main_ctrl_offset + ".sx", main_ctrl_offset + ".sy")
mc.connectAttr(main_ctrl_offset + ".sx", main_ctrl_offset + ".sz")
mc.aliasAttr("Scale", main_ctrl_offset + ".sx")
#lock and hide attributes
lock_hide([
final_group, follicles_grp, ctrl_joints_grp, surf_tr, ctrl_grp, rig_grp
], attrs[:9])
lock_hide([ctrl_grp, main_ctrl, main_ctrl_offset], attrs[7:])
lock_hide(controls, attrs[7:])
#clear selection
mc.select(
cl=True
) #if selection isn't cleared a control joint gets added to the bind joints set
#create a set with bind joints
bind_jnts_set = mc.sets(n=prefix + "bind_jnts_set")
mc.sets(bind_jnts, add=bind_jnts_set)
mc.select(cl=True)
ik_ctrls_set = mc.sets(n=prefix + "ik_ctrls_set")
mc.sets(controls, add=ik_ctrls_set)
mc.select(cl=True)
controls_set = mc.sets(n=prefix + "controls_set")
mc.sets(main_ctrl, ik_ctrls_set, add=controls_set)
##########################################################################################
if add_fk == 1 and mc.getAttr(surf + ".formU") != 2 and mc.getAttr(
surf + ".formV") != 2:
fk_ctrls, fk_ctrl_off_grps = make_fk_ctrls(prefix, num_of_ctrls)
mc.parent(fk_ctrl_off_grps[0], ctrl_grp)
#scale fk controls
fk_ctrl_scale = ik_ctrl_scale * 2
for fk_ctrl in fk_ctrls:
fk_ctrl_shapes = mc.listRelatives(fk_ctrl, s=True)
for fk_ctrl_shape in fk_ctrl_shapes:
fk_ctrl_cvs_count = mc.getAttr(fk_ctrl_shape +
".controlPoints",
size=True)
mc.scale(fk_ctrl_scale,
fk_ctrl_scale,
fk_ctrl_scale,
"{}.cv[0:{}]".format(fk_ctrl_shape,
fk_ctrl_cvs_count - 1),
r=True,
ocp=True)
#add fk controls to a set
mc.select(cl=True)
fk_ctrls_set = mc.sets(n=prefix + "fk_ctrls_set")
mc.sets(fk_ctrls, add=fk_ctrls_set)
########
ik_ctrl_constr_grps = [
mc.group(ctrl, n=ctrl + "_constr_grp") for ctrl in controls
]
[
mc.xform(ik_ctrl_constr_grp, piv=(0, 0, 0), os=True)
for ik_ctrl_constr_grp in ik_ctrl_constr_grps
]
for ik, fk in izip(controls[:-1], fk_ctrl_off_grps):
mc.delete(mc.parentConstraint(ik, fk))
for fk, ik in izip(fk_ctrls, ik_ctrl_constr_grps[:-1]):
mc.parentConstraint(fk, ik)
#constrain last ik ctrl
mc.parentConstraint(fk_ctrls[-1], ik_ctrl_constr_grps[-1], mo=True)
lock_hide(ik_ctrl_constr_grps, attrs[:9])
########
set_color(fk_ctrls, "blue")
lock_hide(fk_ctrl_off_grps, attrs[:9])
mc.sets(fk_ctrls_set, add=controls_set)
mc.select(cl=True)
elif add_fk == 1 and (mc.getAttr(surf + ".formU") == 2
or mc.getAttr(surf + ".formV") == 2):
mc.warning("surface is periodic. fk controls skipped")
################ADD MESSAGE ATTRS################
mc.addAttr(main_ctrl, ln="joints", at="message")
mc.addAttr(main_ctrl, ln="follicles", at="message")
mc.addAttr(main_ctrl, ln="surface", at="message")
if mc.attributeQuery("i_am_the_surface", node=surf, exists=True) == False:
mc.addAttr(surf, ln="i_am_the_surface", at="message")
mc.connectAttr(main_ctrl + ".surface", surf + ".i_am_the_surface")
for j, f in izip(bind_jnts, fols):
mc.addAttr(j, ln="i_am_a_joint", at="message")
mc.addAttr(f, ln="i_am_a_follicle", at="message")
mc.connectAttr(main_ctrl + ".joints", j + ".i_am_a_joint")
mc.connectAttr(main_ctrl + ".follicles", f + ".i_am_a_follicle")
