def doSimpleSolver(self):
"""
Solve single joint in the x-y plane
- first it calculates the angle between the handle and the end-effector.
- then it determines which way to rotate the joint.
"""
handle_group = self.handleGroup()
handle = handle_group.handle(0)
handlePath = OpenMaya.MDagPath.getAPathTo(handle)
fnHandle = OpenMayaAnim.MFnIkHandle(handlePath)
# Get the position of the end_effector
end_effector = OpenMaya.MDagPath()
fnHandle.getEffector(end_effector)
tran = OpenMaya.MFnTransform(end_effector)
effector_position = tran.rotatePivot(OpenMaya.MSpace.kWorld)
# Get the position of the handle
handle_position = fnHandle.rotatePivot(OpenMaya.MSpace.kWorld)
# Get the start joint position
start_joint = OpenMaya.MDagPath()
fnHandle.getStartJoint(start_joint)
start_transform = OpenMaya.MFnTransform(start_joint)
start_position = start_transform.rotatePivot(OpenMaya.MSpace.kWorld)
# Calculate the rotation angle
v1 = start_position - effector_position
v2 = start_position - handle_position
angle = v1.angle(v2)
# -------- Figure out which way to rotate --------
#
# define two vectors U and V as follows
# U = EndEffector(E) - StartJoint(S)
# N = Normal to U passing through EndEffector
#
# Clip handle_position to half-plane U to determine the region it
# lies in. Use the region to determine the rotation direction.
#
# U
# ^ Region Rotation
# | B
# (E)---N A C-C-W
# A | B C-W
# | B
# |
# (S)
#
rot = 0.0 # Rotation about Z-axis
# U and N define a half-plane to clip the handle against
U = effector_position - start_position
U.normalize()
# Get a normal to U
zAxis = OpenMaya.MVector(0.0, 0.0, 1.0)
N = U ^ zAxis # Cross product
N.normalize()
# P is the handle position vector
P = handle_position - effector_position
# Determine the rotation direction
PdotN = P[0] * N[0] + P[1] * N[1]
if PdotN < 0:
rot = angle # counter-clockwise
else:
rot = -1.0 * angle # clockwise
# get and set the Joint Angles
jointAngles = OpenMaya.MDoubleArray()
try:
self._getJointAngles(jointAngles)
except:
# getting angles failed, do nothing
pass
else:
jointAngles.set(jointAngles[0] + rot, 0)
self._setJointAngles(jointAngles)
def set_blend_weights(self, dag_path, components):
blend_weights = om.MDoubleArray(len(self.data['blendWeights']))
for i, w in enumerate(self.data['blendWeights']):
blend_weights.set(w, i)
self.fn.setBlendWeights(dag_path, components, blend_weights)
def addParticlePosToScatter(operation, toleranceForRemove):
sel = mom.MSelectionList()
mom.MGlobal.getActiveSelectionList(sel)
scatterDag = mom.MDagPath()
##clear scatter data
if (operation == 3) and (sel.length() == 1):
sel.getDagPath(0, scatterDag)
scatterDag.extendToShape()
dgFn = mom.MFnDependencyNode(scatterDag.node())
sctModePlug = dgFn.findPlug('scatterMode')
sctMd = sctModePlug.asShort()
mom.MGlobal.displayInfo('JCFeather : Scatter operate on node ' +
dgFn.name())
mom.MGlobal.displayInfo('JCFeather : Clear scatter user point array.')
if sctMd == 1:
clearJCScatterUserData(scatterDag)
elif sctMd == 2:
clearJCScatterInPosition(scatterDag)
return
if sel.length() != 2:
mom.MGlobal.displayError(
'JCFeather : Select a particle and a jcScatter node.')
particleDag = mom.MDagPath()
particleComponent = mom.MObject()
sel.getDagPath(0, particleDag, particleComponent)
sel.getDagPath(1, scatterDag)
scatterDag.extendToShape()
dgFn = mom.MFnDependencyNode(scatterDag.node())
growMeshPlug = dgFn.findPlug('inGrowMesh')
sctModePlug = dgFn.findPlug('scatterMode')
sctMd = sctModePlug.asShort()
plugArray = mom.MPlugArray()
growMeshPlug.connectedTo(plugArray, 1, 0)
if plugArray.length() == 0:
return
mom.MGlobal.displayInfo('JCFeather : Scatter operate on node ' +
dgFn.name())
if sctMd == 1:
############################################## if the jcScatter is in UV scatter mode
mom.MGlobal.displayInfo('JCFeather : Scatter UV mode.')
uAryPlug = dgFn.findPlug('userUArray')
vAryPlug = dgFn.findPlug('userVArray')
uArray = mom.MDoubleArray()
vArray = mom.MDoubleArray()
if (getParticleClosestUVOnMesh(particleDag, particleComponent,
plugArray[0].node(), uArray,
vArray) == 0):
return
mom.MGlobal.displayInfo('JCFeather : Select particle data size ' +
str(uArray.length()))
if operation == 1:
###################################### replace
uDDFn = mom.MFnDoubleArrayData()
vDDFn = mom.MFnDoubleArrayData()
uAryPlug.setMObject(uDDFn.create(uArray))
vAryPlug.setMObject(vDDFn.create(vArray))
mom.MGlobal.displayInfo(
'JCFeather : Replace scatter userUVArray data.')
elif operation == 0:
###################################### add
defaultVecArray = mom.MDoubleArray()
try:
uDDFn = mom.MFnDoubleArrayData(uAryPlug.asMObject())
except:
uDDFn = mom.MFnDoubleArrayData()
uAryPlug.setMObject(uDDFn.create(defaultVecArray))
try:
vDDFn = mom.MFnDoubleArrayData(vAryPlug.asMObject())
except:
vDDFn = mom.MFnDoubleArrayData()
vAryPlug.setMObject(vDDFn.create(defaultVecArray))
oldUArray = uDDFn.array()
oldVArray = vDDFn.array()
oldLen = oldUArray.length()
addNewUvToUV(oldUArray, oldVArray, uArray, vArray,
toleranceForRemove)
uAryPlug.setMObject(uDDFn.object())
vAryPlug.setMObject(vDDFn.object())
mom.MGlobal.displayInfo(
'JCFeather : Add scatter userUVArray data. ' + str(oldLen) +
' --> ' + str(oldUArray.length()))
elif operation == 2:
###################################### remove
try:
uDDFn = mom.MFnDoubleArrayData(uAryPlug.asMObject())
except:
mom.MGlobal.displayError(
"JCFeather : No userUArray data to remove.")
try:
vDDFn = mom.MFnDoubleArrayData(vAryPlug.asMObject())
except:
mom.MGlobal.displayError(
"JCFeather : No userVArray data to remove.")
oldUArray = uDDFn.array()
oldVArray = vDDFn.array()
newULen = uArray.length()
oldULen = oldUArray.length()
resultU = mom.MDoubleArray()
resultV = mom.MDoubleArray()
for j in range(0, oldUArray.length()):
for i in range(0, newULen):
if isDistanceSmaller(oldUArray[j], oldVArray[j], uArray[i],
vArray[i], toleranceForRemove) == 1:
oldUArray.remove(j)
oldVArray.remove(j)
uAryPlug.setMObject(uDDFn.object())
vAryPlug.setMObject(vDDFn.object())
mom.MGlobal.displayInfo(
'JCFeather : Remove scatter userUVArray data. ' +
str(oldULen) + ' --> ' + str(oldUArray.length()))
elif sctMd == 2:
##### if the jcScatter is in InPosition scatter mode
mom.MGlobal.displayInfo('JCFeather : Scatter inPosition mode.')
inPositionPlug = dgFn.findPlug('inPosition')
clstPtAry = getPartticlePos(particleDag, particleComponent)
print('JCFeather : Select particle data size ' +
str(clstPtAry.length()))
if operation == 1:
########################### replace
uDDFn = mom.MFnVectorArrayData()
inPositionPlug.setMObject(uDDFn.create(clstPtAry))
mom.MGlobal.displayInfo(
'JCFeather : Replace scatter inPosition data.')
elif operation == 0:
############################ add
try:
uDDFn = mom.MFnVectorArrayData(inPositionPlug.asMObject())
except:
uDDFn = mom.MFnVectorArrayData()
defaultVecArray = mom.MVectorArray()
inPositionPlug.setMObject(uDDFn.create(defaultVecArray))
myOldVecAry = uDDFn.array()
oldLen = myOldVecAry.length()
addNewParticleToVector(clstPtAry, myOldVecAry, toleranceForRemove)
inPositionPlug.setMObject(uDDFn.object())
mom.MGlobal.displayInfo(
'JCFeather : Add scatter inPosition data. ' + str(oldLen) +
' --> ' + str(myOldVecAry.length()))
elif operation == 2:
############################# remove
try:
uDDFn = mom.MFnVectorArrayData(inPositionPlug.asMObject())
except:
mom.MGlobal.displayError(
"JCFeather : No inPosition data to remove.")
oldVArray = uDDFn.array()
newULen = clstPtAry.length()
oldULen = oldVArray.length()
result = mom.MVectorArray()
idAry = mom.MIntArray()
for j in range(0, oldVArray.length()):
for i in range(0, newULen):
dist = mom.MPoint(oldVArray[j].x, oldVArray[j].y,
oldVArray[j].z).distanceTo(
mom.MPoint(clstPtAry[i].x,
clstPtAry[i].y,
clstPtAry[i].z))
if dist < toleranceForRemove:
oldVArray.remove(j)
inPositionPlug.setMObject(uDDFn.object())
mom.MGlobal.displayInfo(
'JCFeather : Remove scatter inPosition data. ' + str(oldULen) +
' --> ' + str(oldVArray.length()))
def findSurfaceIntersections(self):
'''
Return the pierced points on a surface from a raySource and rayDir
'''
try:
self._str_funcName = 'findSurfaceIntersections'
log.debug(">>> %s >> "%self._str_funcName + "="*75)
if len(mc.ls(surface))>1:
raise StandardError,"findSurfaceIntersections>>> More than one surface named: %s"%surface
self.centerPoint = mc.xform(surface, q=1, ws=1, t=1)
#checking the type
self.objType = search.returnObjectType(surface)
if self.objType == 'nurbsSurface':
raySource = om.MPoint(raySource[0], raySource[1], raySource[2])
self.raySourceVector = om.MVector(raySource[0], raySource[1], raySource[2])
self.centerPointVector = om.MVector(self.centerPoint[0],self.centerPoint[1],self.centerPoint[2])
rayDir = om.MPoint(self.centerPointVector - self.raySourceVector)
self.rayDirection = om.MVector(rayDir[0], rayDir[1], rayDir[2])
self.hitPoints = om.MPoint()
self.selectionList = om.MSelectionList()
self.selectionList.add(surface)
self.surfacePath = om.MDagPath()
self.selectionList.getDagPath(0, self.surfacePath)
self.surfaceFn = om.MFnNurbsSurface(self.surfacePath)
#maxDist
self.maxDist = maxDistance
#other variables
self.u = om.MDoubleArray()
self.v = om.MDoubleArray()
self.spc = om.MSpace.kWorld
self.toleranceSU = om.MScriptUtil()
self.tolerance = self.toleranceSU.asDoublePtr()
om.MScriptUtil.setDouble(self.tolerance, .1)
#Get the closest intersection.
self.gotHit = self.surfaceFn.intersect(raySource,self.rayDirection,self.u,self.v,self.hitPoints,self.toleranceSU.asDouble(),self.spc,False,None,False,None)
elif self.objType == 'mesh':
raySource = om.MFloatPoint(raySource[0], raySource[1], raySource[2])
self.raySourceVector = om.MFloatVector(raySource[0], raySource[1], raySource[2])
self.centerPointVector = om.MFloatVector(self.centerPoint[0],self.centerPoint[1],self.centerPoint[2])
rayDir = om.MFloatPoint(self.centerPointVector - self.raySourceVector)
self.rayDirection = om.MFloatVector(rayDir[0], rayDir[1], rayDir[2])
self.hitPoints = om.MFloatPointArray()
self.selectionList = om.MSelectionList()
self.selectionList.add(surface)
self.meshPath = om.MDagPath()
self.selectionList.getDagPath(0, self.meshPath)
self.meshFn = om.MFnMesh(self.meshPath)
#maxDist
self.maxDist = maxDistance
#other variables
self.spc = om.MSpace.kWorld
#Get the closest intersection.
self.gotHit = self.meshFn.allIntersections(raySource,self.rayDirection,None,None,False,self.spc,self.maxDist,False,None,False,self.hitPoints,None,None,None,None,None)
else : raise StandardError,"wrong surface type!"
#Return the intersection as a Python list.
if self.gotHit:
self.returnDict = {}
self.hitList = []
self.uvList = []
for i in range( self.hitPoints.length() ):
self.hitList.append( [self.hitPoints[i].x, self.hitPoints[i].y, self.hitPoints[i].z])
self.hitMPoint = om.MPoint(self.hitPoints[i])
self.pArray = [0.0,0.0]
self.x1 = om.MScriptUtil()
self.x1.createFromList(pArray, 2)
self.uvPoint = x1.asFloat2Ptr()
self.uvSet = None
self.uvReturn = self.surfaceFn.getParamAtPoint(self.hitMPoint,self.uvPoint,self.paramU,self.paramV, self.ignoreTrimBoundaries, om.MSpace.kObject, self.kMFnNurbsEpsilon)
self.uValue = om.MScriptUtil.getFloat2ArrayItem(self.uvPoint, 0, 0) or False
self.vValue = om.MScriptUtil.getFloat2ArrayItem(uvPoint, 0, 1) or False
self.uvList.append([self.uValue,self.vValue])
self.returnDict = {'hits':self.hitList,'source':[raySource.x,raySource.y,raySource.z],'uvs':self.uvList}
return self.returnDict
else: return None
except StandardError,error:
log.error(">>> surface | raysource | rayDir | error")
return None
def collectBlendWeights(skinCls, dagPath, components, dataDic):
weights = OpenMaya.MDoubleArray()
skinCls.__apimfn__().getBlendWeights(dagPath, components, weights)
dataDic['blendWeights'] = [weights[i] for i in range(weights.length())]
def loadWeights(self,
skinCluster=None,
influenceList=None,
componentList=None,
normalize=True):
'''
Apply the stored skinCluster weights.
@param skinCluster: The list of components to apply skinCluster weights to.
@type skinCluster: str
@param influenceList: The list of skinCluster influences to apply weights for.
@type influenceList: list or None
@param componentList: The list of components to apply skinCluster weights to.
@type componentList: list or None
@param normalize: Normalize influence weights.
@type normalize: bool
'''
# ==========
# - Checks -
# ==========
# Check SkinCluster
if not skinCluster: skinCluster = self._data['name']
self.verifySkinCluster(skinCluster)
# Check Geometry
skinGeo = self._data['affectedGeometry'][0]
if not mc.objExists(skinGeo):
raise Exception(
'SkinCluster geometry "' + skinGeo +
'" does not exist! Use remapGeometry() to load skinCluster data to a different geometry!'
)
# Check Influence List
if not influenceList: influenceList = self._influenceData.keys() or []
for influence in influenceList:
if not influence in mc.skinCluster(skinCluster, q=True,
inf=True) or []:
raise Exception('Object "' + influence +
'" is not a valid influence of skinCluster "' +
skinCluster +
'"! Unable to load influence weights...')
if not self._influenceData.has_key(influence):
raise Exception('No influence data stored for "' + influence +
'"! Unable to load influence weights...')
# Check Component List
if not componentList:
componentList = glTools.utils.component.getComponentStrList(
skinGeo)
componentSel = glTools.utils.selection.getSelectionElement(
componentList, 0)
# Get Component Index List
#indexList = OpenMaya.MIntArray()
#componentFn = OpenMaya.MFnSingleIndexedComponent(componentSel[1])
#componentFn.getElements(indexList)
#componentIndexList = list(indexList)
componentIndexList = glTools.utils.component.getSingleIndexComponentList(
componentList)
componentIndexList = componentIndexList[componentIndexList.keys()[0]]
# =====================================
# - Set SkinCluster Influence Weights -
# =====================================
# Get Influence Index
infIndexArray = OpenMaya.MIntArray()
for influence in influenceList:
infIndex = glTools.utils.skinCluster.getInfluencePhysicalIndex(
skinCluster, influence)
infIndexArray.append(infIndex)
# Build Weight Array
wtArray = OpenMaya.MDoubleArray()
oldWtArray = OpenMaya.MDoubleArray()
for c in componentIndexList:
for i in range(len(influenceList)):
if self._influenceData.has_key(influenceList[i]):
wtArray.append(
self._influenceData[influenceList[i]]['wt'][c])
else:
wtArray.append(0.0)
# Get skinCluster function set
skinFn = glTools.utils.skinCluster.getSkinClusterFn(skinCluster)
# Set skinCluster weights
skinFn.setWeights(componentSel[0], componentSel[1], infIndexArray,
wtArray, normalize, oldWtArray)
# =================
# - Return Result -
# =================
return list(wtArray)
def bake(instancerName, start, end, progress=None):
"""
Process an instancer node over the specified frame range, reading the
positions and objects. With this data objects are duplicated and
positioned to mimic the instancer. With the particle data individual
objects can be matched over the different frames and animated. When
a particle "dies", the visibility is turned off.
:param str instancerName: Name if the instancer to bake
:param int start: Start frame
:param int end: End frame
:param QProgressBar progress: Update ui ( Optional )
:return: Group that contains all of the baked information
:rtype: str
:raises RuntimeError: When the instancer doesn't exist
:raises RuntimeError: When there are no particles attached
"""
# store all particle information in data variable
data = {}
# get instance
if not cmds.objExists(instancerName):
raise RuntimeError("Instancer doesn't exist!")
# set visible
cmds.setAttr("{0}.visibility".format(instancerName), 1)
instancerObj = utils.asMObject(instancerName)
instancerDag = utils.asMDagPath(instancerObj)
instancer = OpenMayaFX.MFnInstancer(instancerDag)
# get particles
particleName = cmds.listConnections(
"{0}.inputPoints".format(instancerName))
if not particleName:
raise RuntimeError("No particles connected!")
particleName = particleName[0]
particleObj = utils.asMObject(particleName)
particleDag = utils.asMDagPath(particleObj)
particle = OpenMayaFX.MFnParticleSystem(particleDag)
# variables
ages = OpenMaya.MDoubleArray()
paths = OpenMaya.MDagPathArray()
matrices = OpenMaya.MMatrixArray()
particleIndices = OpenMaya.MIntArray()
pathIndices = OpenMaya.MIntArray()
# create container group
container = cmds.group(world=True,
empty=True,
n="{0}_bake_1".format(instancerName))
# loop time
for i in range(start, end + 1):
# set time
cmds.currentTime(i)
# query instancer information
instancer.allInstances(paths, matrices, particleIndices, pathIndices)
# query particle information
particle.age(ages)
# loop particle instances
num = matrices.length()
for j in range(num):
# get particles index
p = particleIndices[j]
# get parent
parent = paths[pathIndices[j]].fullPathName()
# get age
age = ages[j]
if data.get(p):
# get path and age
path = data[p].get("path")
oldAge = data[p].get("age")
oldParent = data[p].get("parent")
# check if age is less than previous
if age < oldAge:
# hide mesh and delete particle id data
utils.keyVisibility(path, i, 0)
del (data[p])
# check if parent is the same as previous
elif parent != oldParent:
# hide mesh and delete particle id data
utils.keyVisibility(path, i, 0)
del (data[p])
# duplicate path if index not in data
if not data.get(p):
# get parent name
parentShort = parent.split("|")[-1].split(":")[-1]
# duplicate mesh
name = "{0}_{1}_1".format(instancerName, parentShort)
path = cmds.duplicate(parent, n=name)[0]
path = cmds.parent(path, container)[0]
# handle visibility
utils.keyVisibility(path, i, 1)
# get dag
dag = utils.asMDagPath(utils.asMObject(path))
# get matrix
transform = utils.asMFnTransform(dag)
matrix = transform.transformation().asMatrix()
# store variables
data[p] = {}
data[p]["path"] = path
data[p]["dag"] = dag
data[p]["matrix"] = matrix
data[p]["parent"] = parent
# get variables
path = data[p].get("path")
dag = data[p].get("dag")
matrix = data[p].get("matrix")
# store age
data[p]["age"] = age
# set matrix
m = matrix * matrices[j]
m = OpenMaya.MTransformationMatrix(m)
transform = utils.asMFnTransform(dag)
transform.set(m)
# set keyframes
utils.keyTransform(path, i)
# update progress
if progress:
progress.setValue(i + 1 - start)
return container
def vtxSave_Oapi(self):
selList = Om.MSelectionList()
Om.MGlobal.getActiveSelectionList(selList)
#_prselList = []
# selList.getSelectionStrings(_prselList) #获取 MSelectionList 内容
# print _prselList
if selList.isEmpty():
Om.MGlobal.displayError('Select Nothing')
return
MDagPath = Om.MDagPath() # 存储所选物体的路径
MObject = Om.MObject() # 存储所选物体的组件的列表
selList.getDagPath(0, MDagPath)
selList.getDependNode(0, MObject)
# MDagPath.fullPathName() #获取 MDagPath 内容
slMIt = Om.MItSelectionList(selList)
MItDagPath = Om.MDagPath()
MItcomponent = Om.MObject()
slMIt.getDagPath(MItDagPath, MItcomponent)
_selType = MDagPath.apiType()
MDagPath.extendToShape() # 获取当前物体的shape节点
_selShapeType = MDagPath.apiType()
if not _selType in set([110, 296, 267, 294, 279, ]):
return
elif _selShapeType == 296:
suf = 'vtx'
elif _selShapeType == 267 or _selShapeType == 294:
suf = 'cv'
elif _selShapeType == 279:
suf = 'pt'
skCluster = mel.eval('findRelatedSkinCluster("%s")' % MDagPath.partialPathName())
if not skCluster:
return
#connectNode = cmds.listHistory(MDagPath.partialPathName(), il=1, pdo=1)
# if not connectNode:
# Om.MGlobal.displayError('Select No Skin')
# return
# for skCluster in connectNode:
# if cmds.nodeType(skCluster) == 'skinCluster':
# break
# if skCluster == connectNode[-1]:
# return
Om.MGlobal.getSelectionListByName(skCluster, selList)
skinObj = Om.MObject()
selList.getDependNode(1, skinObj)
skinNode = OmAni.MFnSkinCluster(skinObj)
infs = Om.MDagPathArray()
numInfs = skinNode.influenceObjects(infs)
infNameList = [] # 骨骼列表
for i in range(numInfs):
infName = infs[i].partialPathName()
infNameList.append(infName)
# fn = Om.MFnDependencyNode(MDagPath.node()) #获取MDagPath的内容?
# print fn.name() #获取 MFnDependencyNode 内容
filePath = cmds.fileDialog2(ff='WeightFile (*.vtxWeight *.sdd)', ds=2) # vtxWeight (*.vtxWeight);;sdd (*.sdd)
if not filePath:
return
fileLine = []
Lineapp = fileLine.append
if not MItcomponent.isNull(): # component组件不为空(点), 线和面会强制转为点
vertIter = Om.MItGeometry(MItDagPath, MItcomponent)
else:
vertIter = Om.MItGeometry(MObject)
while not vertIter.isDone():
infCount = Om.MScriptUtil()
infCountPtr = infCount.asUintPtr()
Om.MScriptUtil.setUint(infCountPtr, 0)
weights = Om.MDoubleArray()
skinNode.getWeights(MDagPath, vertIter.currentItem(), weights, infCountPtr)
tvList = self.zeroWeightData_Save(weights, infNameList)
wtStr = '%s[%s]--%s\r\n' % (suf, vertIter.index(), tvList)
Lineapp(wtStr)
vertIter.next()
with open(filePath[0], 'w') as vwfile:
for i in fileLine:
vwfile.write(i)
DisplayYes().showMessage('Process Finish!')
def vtxLoad_Oapi(self):
selList = Om.MSelectionList()
Om.MGlobal.getActiveSelectionList(selList)
if selList.isEmpty():
Om.MGlobal.displayError('Select Nothing')
return
elif selList.length() != 1:
Om.MGlobal.displayError("Nothing selected")
MDagPath = Om.MDagPath() # 存储所选物体的路径
MObject = Om.MObject() # 存储所选物体的组件的列表
selList.getDagPath(0, MDagPath)
selList.getDependNode(0, MObject)
# MDagPath.fullPathName() #获取 MDagPath 内容
_selType = MDagPath.apiType()
if _selType != 110:
Om.MGlobal.displayError('Please Select Object')
return
skCluster = mel.eval('findRelatedSkinCluster("%s")' % MDagPath.partialPathName())
if not skCluster:
return
Om.MGlobal.getSelectionListByName(skCluster, selList)
skinObj = Om.MObject()
selList.getDependNode(1, skinObj)
skinNode = OmAni.MFnSkinCluster(skinObj)
infs = Om.MDagPathArray()
numInfs = skinNode.influenceObjects(infs)
infNameList = [] # 骨骼列表
for i in range(numInfs):
infName = infs[i].partialPathName()
infNameList.append(infName)
# fn = Om.MFnDependencyNode(MDagPath.node()) #获取MDagPath的内容?
# print fn.name() #获取 MFnDependencyNode 内容
filePath = cmds.fileDialog2(ff='WeightFile (*.vtxWeight *.sdd)', ds=2, fm=1)
if not filePath:
return
allLine = self.readWeightData_Load(filePath[0])
if allLine == 'toMel':
Om.MGlobal.displayWarning('Some Error. Please ReSelect')
self.vtxLoad_Mel()
return
jntLock = []
for j in infNameList:
jntLock.append(cmds.getAttr(j + '.liw'))
cmds.setAttr(j + '.liw', 0)
vertIter = Om.MItGeometry(MObject)
_Num = 0
while not vertIter.isDone():
if vertIter.index() != int(allLine[_Num][0]):
vertIter.next()
continue
jntindex = Om.MIntArray()
weights = Om.MDoubleArray()
jntindexapp = jntindex.append
weightsapp = weights.append
for i in range(len(allLine[_Num][1])):
jntindexapp(infNameList.index(allLine[_Num][1][i]))
weightsapp(allLine[_Num][2][i])
skinNode.setWeights(MDagPath, vertIter.currentItem(), jntindex, weights, False) # False规格化开关默认为True
_Num += 1
vertIter.next()
for j, l in zip(infNameList, jntLock):
cmds.setAttr(j + '.liw', l)
DisplayYes().showMessage('Process Finish!')
def redoIt(self):
# get the vertex to operating on
self.component = om.MFnSingleIndexedComponent().create(
om.MFn.kMeshVertComponent)
om.MFnSingleIndexedComponent(self.component).addElement(self.index)
# get surrounding vertices
surrWeights = om.MDoubleArray(
) # storing weights of surrounding vertices
msInf = om.MScriptUtil() # script util for int pointer
infCountPtr = msInf.asUintPtr(
) # unsigned int pointer sotring number of influences on the vertex
surrVtxArray = om.MIntArray() # storing sorrounding vertex indices
# create iterator
mitVtx = om.MItMeshVertex(self.dagPath, self.component)
mitVtx.getConnectedVertices(surrVtxArray)
surrComponents = om.MFnSingleIndexedComponent().create(
om.MFn.kMeshVertComponent)
om.MFnSingleIndexedComponent(surrComponents).addElements(surrVtxArray)
# read weight from single vertex, store to oldWeights
self.fnSkin.getWeights(self.dagPath, self.component, self.oldWeights,
infCountPtr)
# read weight fromthe surrounding vertices, store to surrWeights
self.fnSkin.getWeights(self.dagPath, surrComponents, surrWeights,
infCountPtr)
# number of influences affecting the operating vertex
influenceCount = om.MScriptUtil.getUint(infCountPtr)
# reset variable infIndices
infIndices_util = om.MScriptUtil()
infIndices_util.createFromList(range(0, influenceCount),
influenceCount)
infIndices_iPtr = infIndices_util.asIntPtr()
self.infIndices = om.MIntArray(infIndices_iPtr, influenceCount)
# calculate multiplier for each surrounding vertices base on distance
# distances = []
# dist_append = distances.append
# mPt = om.MPoint
# mSpaceKObj = om.MSpace.kObject
# fnOrigMesh_getPoint = self.fnOrigMesh.getPoint
# get operating vertex point position on the orig mesh
# compPt = mPt()
# cPt_distTo = compPt.distanceTo
# fnOrigMesh_getPoint(self.index, compPt, mSpaceKObj)
# loop over each surrounding vertices to get distance to the operating vertex
# for sIndx in sorted(surrVtxArray):
# sPoint = mPt()
# fnOrigMesh_getPoint(sIndx, sPoint, mSpaceKObj)
# dist = cPt_distTo(sPoint)
# dist_append(dist)
# average all the surrounding vertex weights, multiply with the brush value and blend it over the origWeight
oldWeight = self.oldWeights
values = []
values_append = values.append
# pre-calculate what we can before entering the loop
surrVtxCount = surrVtxArray.length()
pressure = self.pressure
pressure_sqr = pressure * pressure
pre_mult = (1.0 / surrVtxCount) * (1.0 - pressure)
# normalize and invert the distances, make closer distance has more value than the further ones
# mults = [(sum(distances)/d)*pressure_sqr for d in distances]
# the main weight value calculation loop
for i in xrange(0, influenceCount):
v = oldWeight[i] * pre_mult
for w in xrange(0, surrVtxCount):
# v += surrWeights[i + (w*influenceCount)] * mults[w]
v += surrWeights[i + (w * influenceCount)] * pressure_sqr
values_append(v)
# do maintain max influences if maintainMaxInfluences is checked on the skinCluster node
if self.maintainMaxInfluences == True:
# get indices of the top N values
maxIndexs = sorted(range(influenceCount),
key=lambda v: values[v],
reverse=True)[:self.maxInfluences]
maxVals = [0] * influenceCount
for i in maxIndexs:
maxVals[i] = values[i]
else: # else, just use the calculated list
maxVals = values
# normalize
normList = [w / sum(maxVals) for w in maxVals]
# cast python list to MDoubleArray
# newWeights
newWeight_util = om.MScriptUtil()
newWeight_util.createFromList(normList, influenceCount)
newWeight_dPtr = newWeight_util.asDoublePtr()
newWeights = om.MDoubleArray(newWeight_dPtr, influenceCount)
# set the final weights throught the skinCluster
self.fnSkin.setWeights(self.dagPath, self.component, self.infIndices,
newWeights, False, self.oldWeights)
def buildData(self, curve, worldSpace=False):
'''
Build NurbsCurveData class.
@param curve: Curve to build data from
@type curve: str
'''
# ==========
# - Checks -
# ==========
# Check Curve
if not glTools.utils.curve.isCurve(curve):
raise Exception('Object "' + curve +
'" is not a vaild NURBS curve node!')
# World Space
space = OpenMaya.MSpace.kObject
if worldSpace: space = OpenMaya.MSpace.kWorld
# ==============
# - Build Data -
# ==============
# Start timer
timer = mc.timerX()
# Get basic curve info
self._data['name'] = curve
# Get Curve Function Class
curveFn = glTools.utils.curve.getCurveFn(curve)
# Get Curve Degree and Form
self._data['degree'] = curveFn.degreeU()
self._data['form'] = int(curveFn.formInU())
# Get Curve Knots
knotArray = OpenMaya.MDoubleArray()
curveFn.getKnotsInU(knotArray)
self._data['knots'] = list(knotArray)
# Get Control Vertices
cvArray = OpenMaya.MPointArray()
curveFn.getCVs(cvArray, space)
self._data['cv'] = [(cvArray[i].x, cvArray[i].y, cvArray[i].z)
for i in range(cvArray.length())]
# Get Edit Points
editPt = OPenMaya.MPoint()
for u in self._data['knots']:
curveFn.getPointAtParam(u, editPt, space)
self._data['editPt'].append((editPt.x, editPt.y, editPt.z))
# =================
# - Return Result -
# =================
# Print timer result
buildTime = mc.timerX(st=timer)
print('NurbsCurveData: Data build time for curve "' + curve + '": ' +
str(buildTime))
return self._data['name']
class instanceRotate(OpenMayaMPx.MPxCommand):
#- Store the base shape for the instances here for undo
shapeObj = OpenMaya.MDagPath()
#- Store the original rotation values for undo here
rotations = OpenMaya.MDoubleArray()
def __init__(self):
OpenMayaMPx.MPxCommand.__init__(self)
#- Store the user selection of the rotation axis (one axis for all of the instances)
self.axis = AXIS_X
#- Store the number of instances for one shape
self.numInstances = 0
#- This method is used to specify whether or not the command is undoable. In
#- the base class, it always returns false. If you are writing a command that
#- might be eligible for undo, you should override this method.
#- After Maya executes the command's doIt method, it will call isUndoable. If
#- isUndoable returns true, Maya will retain the instance of the class and pass
#- it to Maya's undo manager so that the undoIt and redoIt methods can be called
#- when appropriate. If isUndoable returns false, the command instance will be
#- immediately destroyed.
#def isUndoable(self):
# return True
#def hasSyntax(self):
# return True
#- This method should perform a command by setting up internal class data
#- and then calling the redoIt method if undo is supported by the command.
#- The actual action performed by the command should be done in the redoIt
#- method. This is a pure virtual method, and must be overridden in derived
#- classes.
def doIt(self, args):
#- Since all the command actions will be done in the redoIt() method, this
#- method will only parse the arguments. redoIt() will not use arguments
#- at all.
argParser = OpenMaya.MArgParser (self.syntax(),args)
numFlags = argParser.numberOfFlagsUsed()
if(numFlags != 1):
OpenMaya.MGlobal.displayError("Simple Plugs requires one flag argument and a DAG object must be selected")
return None
else:
if(argParser.isFlagSet(ROTATEFLAG) | argParser.isFlagSet(ROTATELONGFLAG)):
#- The user enters 1, 2, or 3 to indicate x, y, or z rotation axis
flag =argParser.flagArgumentInt(ROTATEFLAG,0)
if(flag == AXIS_X):
self.axis = AXIS_X
elif(flag == AXIS_Y):
self.axis = AXIS_Y
elif(flag == AXIS_Z):
self.axis = AXIS_Z
else:
OpenMaya.MGlobal.displayError("Invalid axis rotation argument")
return None
return self.redoIt(args)
#- This method should do the actual work of the command based on the internal
#- class data only. Internal class data should be set in the doIt method.
def redoIt(self, args):
OpenMayaMPx.MPxCommand.setResult( "instanceRotate command executed!\n" )
#- This is really where is the intelligence of the command. Here we will
#- preform all the actions we wanted to implement for this command.
#- Get the active selection in the Maya viewport.
selList = OpenMaya.MSelectionList()
OpenMaya.MGlobal.getActiveSelectionList(selList)
if(selList.isEmpty()):
OpenMaya.MGlobal.displayError("A single DAG object must be selected")
return None
dagPath = OpenMaya.MDagPath()
selList.getDagPath(0,dagPath)
#- Chances are the user selected the object from the panel view or
#- outliner window so the object in the list will actually be a
#- transform node... if so we call extendToShape to grab the actual
#- shape node from the dagPath
#- TODO: Test if this node is a transform node, and if so extend the
#- TODO: dagPath to the real shape node.
#...
#...
if(dagPath.isInstanced()):
self.shapeObj = dagPath
self.rotate(dagPath)
else:
OpenMaya.MGlobal.displayError("The selected item is not an instanced DAG object")
return None
#- This method should undo the work done by the redoIt method based on the
#- internal class data only.
def undoIt(self, args):
OpenMaya.MGlobal.displayInfo( "instanceRotate command undone!\n" )
fnDag = MFnDagNode(self.shapeObj)
for i in range ( 0, self.numInstances ):
currentParent = fnDag.parent(i)
fnParent = OpenMaya.MFnDependencyNode(currentParent)
rotPlug = fnParent.findPlug("rotate")
if (self.axis == AXIS_X):
rotxPlug = rotPlug.child(0)
rotxPlug.setDouble(self.rotations[i])
elif (self.axis == AXIS_Z):
rotzPlug = rotPlug.child(2)
rotzPlug.setDouble(self.rotations[i])
else: # AXIS_Y:
rotyPlug = rotPlug.child(1)
rotyPlug.setDouble(self.rotations[i])
#- Empty the array in case the user chooses redoIt
self.rotations.clear()
#- Method used by redoIt to assign a 45 degree rotation along a random axis.
def rotate( self, dp ):
#- The passed-in dag object is a shape object,
#- need to find all the parent transform objects.
fnDag = OpenMaya.MFnDagNode(dp)
#- The number of parents represents the current number of instances.
self.numInstances = fnDag.parentCount()
for i in range ( 0, self.numInstances ):
currentParent = fnDag.parent(i)
fnParent = OpenMaya.MFnDependencyNode(currentParent)
#- Find the rotate plug, figure out which axis the user opted for
#- and set the plug to a random direction.
#- TODO: find the plug named 'rotate'
rotPlug = #...
#- Acquire a random number deciding which direction the 45 degree should be
randVal = random.randint(0, 1000)
if(randVal % 2 == 0):
randVal = 1
else:
randVal = -1
print "The randVal is %d " % randVal
sys.stdout.write( '\n' )
if (self.axis == AXIS_X):
#- TODO: Get the X plug of the 'rotate' plug
rotxPlug = #...
#- retrieve original rotation and store it in member variable "rotations"
origRot = 0
#- TODO: Get the plug value
#...
self.rotations.append(origRot)
#- set new rotation
rot = origRot + randVal * ROTATIONVALUE
#- TODO: Set the new plug value
#...
elif (self.axis == AXIS_Z):
#- TODO: Get the Z plug of the 'rotate' plug
rotzPlug = #...
origRot = 0
#- TODO: Get the plug value
#...
self.rotations.append(origRot)
rot = origRot + randVal * ROTATIONVALUE
#- TODO: Set the new plug value
#...
else: # AXIS_Y: - by default, rotate around y axis
- TODO: Get the Y plug of the 'rotate' plug
rotyPlug = #...
origRot = 0
#- TODO: Get the plug value
#...
self.rotations.append(origRot)
rot = origRot + randVal * ROTATIONVALUE
def writeWeights(self, fileName, exclusive):
# get the current selection
skinClusterNode = cmds.ls(sl=True, fl=True)
if len(skinClusterNode) != 0:
skinClusterNode = skinClusterNode[0]
else:
OpenMaya.MGlobal.displayError(
'Select a skinCluster node to export.')
return (-1)
# check if it's a skinCluster
if cmds.nodeType(skinClusterNode) != 'skinCluster':
OpenMaya.MGlobal.displayError(
'Selected node is not a skinCluster.')
return (-1)
# get the MFnSkinCluster
sel = OpenMaya.MSelectionList()
OpenMaya.MGlobal.getActiveSelectionList(sel)
skinClusterObject = OpenMaya.MObject()
sel.getDependNode(0, skinClusterObject)
# documentation: MFNSkinCluster: https://help.autodesk.com/view/MAYAUL/2018/ENU/?guid=__cpp_ref_class_m_fn_skin_cluster_html
skinClusterFn = OpenMayaAnim.MFnSkinCluster(skinClusterObject)
# get the influence objects
infls = cmds.skinCluster(skinClusterNode, q=True, inf=True)
if len(infls) == 0:
OpenMaya.MGlobal.displayError(
'No influence objects found for skinCluster %s.' %
skinClusterNode)
return (-1)
# get the connected shape node
shape = cmds.skinCluster(skinClusterNode, q=True, g=True)[0]
if len(shape) == 0:
OpenMaya.MGlobal.displayError('No connected shape nodes found.')
return (-1)
# get the dag path of the shape node
cmds.select(shape, r=True)
sel = OpenMaya.MSelectionList()
OpenMaya.MGlobal.getActiveSelectionList(sel)
shapeDag = OpenMaya.MDagPath()
sel.getDagPath(0, shapeDag)
# create the geometry iterator
geoIter = OpenMaya.MItGeometry(shapeDag)
# create a pointer object for the influence count of the MFnSkinCluster
infCount = OpenMaya.MScriptUtil()
infCountPtr = infCount.asUintPtr()
OpenMaya.MScriptUtil.setUint(infCountPtr, 0)
value = OpenMaya.MDoubleArray()
#
# default export to a single skin weights file
#
if not exclusive:
try:
weightFile = open(fileName, 'wb')
except:
OpenMaya.MGlobal.displayError(
'A file error has occured for file \'' + fileName + '\'.')
return (-1)
# write all influences and the shape node to the file
for i in range(0, len(infls), 1):
weightFile.write(infls[i] + " ")
weightFile.write(shape + '\n')
weightFile.write(skinClusterNode + '\n')
# write the attributes of the skinCluster node to the file
result = cmds.getAttr(skinClusterNode + ".normalizeWeights")
weightFile.write('-nw %s ' % result)
result = cmds.getAttr(skinClusterNode + ".maxInfluences")
weightFile.write('-mi %s ' % result)
result = cmds.getAttr(skinClusterNode + ".dropoff")[0][0]
weightFile.write('-dr %s\n' % result)
# get the skinCluster weights
while geoIter.isDone() == False:
skinClusterFn.getWeights(shapeDag, geoIter.currentItem(),
value, infCountPtr)
for j in range(0, len(infls)):
if value[j] > 0:
lineArray = [geoIter.index(), infls[j], j, value[j]]
weightFile.write(str(lineArray) + '\n')
geoIter.next()
weightFile.close()
#
# custom export to individual files
#
else:
cmds.skinCluster(skinClusterNode, e=True, fnw=True)
dataPath = '%s/%s' % (fileName, skinClusterNode)
if not os.path.exists(dataPath):
try:
os.makedirs(dataPath)
except:
OpenMaya.MGlobal.displayError(
'Unable to create export directory \'' + dataPath +
'\'.')
return (-1)
for j in range(0, len(infls)):
fileName = '%s/%s.bsw' % (dataPath, infls[j])
try:
weightFile = open(fileName, 'wb')
except:
OpenMaya.MGlobal.displayError(
'A file error has occured for file \'' + fileName +
'\'.')
return (-1)
geoIter.reset()
while geoIter.isDone() == False:
skinClusterFn.getWeights(shapeDag, geoIter.currentItem(),
value, infCountPtr)
line = str(geoIter.index()) + ' ' + str(value[j]) + '\n'
weightFile.write(line)
geoIter.next()
weightFile.close()
return (1)
def __getBlendWeights(self, dagPath, components):
weights = OpenMaya.MDoubleArray()
self.__mFnScls.getBlendWeights(dagPath, components, weights)
return weights
def calculateWeights(self, weights, num):
"""
Calculate the new weights of the removed indices. The new weights are
calculated by trying to remove the influence that is active in the
tool. Locked influences, normalization are taken into account as they
are set on the skin cluster.
:param OpenMaya.MDoubleArray weights: original weights
:param int num: Amount of influences per vertex
:return: New weights, new influences
:rtype: tuple(OpenMaya.MDoubleArray, OpenMaya.MIntArray)
"""
# variables
influenceNew = OpenMaya.MIntArray()
weightsNew = OpenMaya.MDoubleArray()
# add influences
for i in range(num):
influenceNew.append(i)
# calculate weights
for i in range(0, weights.length(), num):
weightsVtx = [weights[i + j] for j in range(num)]
indexWeight = weights[i + self.index]
total = sum(weightsVtx)
# if weight that is trying to be removed is only influence
# reselect vertex as weights cannot be removed
if indexWeight == total:
for w in weightsVtx:
weightsNew.append(w)
continue
# remove index weight
factor = 1
factorLocked = 1
weightsVtx = [
weights[i + j] if j != self.index else 0.0 for j in range(num)
]
# normalize weights
if self.normalizeMode == 1:
# get total locked weights
weightsVtxLocked = sum([
weights[i + j] for j in range(num)
if self.influencesLocked[j]
])
# get total to blend
total = sum(weightsVtx) - weightsVtxLocked
# get multiply factor
if weightsVtxLocked >= 1.0 or total == 0.0:
factor = 0
factorLocked = 1 / weightsVtxLocked
else:
factor = (1.0 - weightsVtxLocked) / total
# apply multiply factor
for j, w in enumerate(weightsVtx):
if not self.influencesLocked[j]:
weightsNew.append(w * factor)
else:
weightsNew.append(w * factorLocked)
return weightsNew, influenceNew
def sang_kraduk(mmddata, chue_nod_poly, khanat, ao_ik):
print(u'骨を作成中')
list_chue_nod_kho = [] # ลิสต์เก็บชื่อของโหนดข้อ
for i, b in enumerate(mmddata.bones):
# แก้ชื่อข้อต่อให้เป็นโรมาจิ
chue_kho = romaji(chuedidi(b.name, u'kho%d' % i))
p = b.position # ตำแหน่งของข้อต่อ
mc.select(d=1)
# สร้างข้อต่อตามตำแหน่งที่กำหนด
chue_nod_kho = mc.joint(p=[p.x * khanat, p.y * khanat, -p.z * khanat],
rad=khanat / 2,
n=chue_kho + '_' + chue_nod_poly)
# เก็บชื่อเดิมไว้เผื่อใช้
mc.addAttr(chue_nod_kho, ln='namae', nn=u'名前', dt='string')
mc.setAttr(chue_nod_kho + '.namae',
chuedidi(b.name, chue_nod_kho),
typ='string')
# ซ่อนข้อต่อที่ไม่จำเป็นต้องเห็น
if (b.getIkFlag() or not b.getVisibleFlag()):
mc.setAttr(chue_nod_kho + '.drawStyle', 2)
else:
mc.setAttr(chue_nod_kho + '.drawStyle', 0)
# ตั้งค่าการจัดวางแกนหมุนของข้อ
if (b.getLocalCoordinateFlag() or b.getFixedAxisFlag()):
if (b.getFixedAxisFlag()):
kaen_x = b.fixed_axis
kaen_z = cross([0.0, 1.0, 0.0], kaen_x)
else:
kaen_x = b.local_x_vector
kaen_z = b.local_z_vector
kaen_y = cross(kaen_z, kaen_x)
array_mun = [
kaen_x[0], kaen_x[1], -kaen_x[2], 0., kaen_y[0], kaen_y[1],
-kaen_y[2], 0., kaen_z[0], kaen_z[1], -kaen_z[2], 0., 0., 0.,
0., 1.
]
matrix_mun = om.MMatrix() # สร้างเมทริกซ์หมุน
om.MScriptUtil.createMatrixFromList(array_mun, matrix_mun)
trans = om.MTransformationMatrix(matrix_mun)
mum_euler = trans.eulerRotation().asVector()
mc.setAttr(chue_nod_kho + '.jointOrientX',
math.degrees(mum_euler.x))
mc.setAttr(chue_nod_kho + '.jointOrientY',
math.degrees(mum_euler.y))
mc.setAttr(chue_nod_kho + '.jointOrientZ',
math.degrees(mum_euler.z))
list_chue_nod_kho.append(chue_nod_kho)
list_mi_ik = [] # ลิสต์ของข้อต่อที่มี IK
list_chue_nod_nok = [] # ลิสต์ของข้อต่อที่อยู่นอกสุด
for i, b in enumerate(mmddata.bones):
chue_nod_kho = list_chue_nod_kho[i]
if (b.parent_index >= 0):
# ผูกติดข้อต่อแต่ละข้อเข้าด้วยกัน
chue_nod_parent = list_chue_nod_kho[b.parent_index]
mc.connectJoint(chue_nod_kho, chue_nod_parent, pm=1)
else:
list_chue_nod_nok.append(chue_nod_kho)
# แก้ปัญหากรณีที่มุมหมุนของกระดูกมีค่าแปลกๆ (เกิดขึ้นได้อย่างไรยังไม่รู้แน่ชัด)
if (round(mc.getAttr(chue_nod_kho + '.rx')) == -360.):
mc.setAttr(chue_nod_kho + '.rx', 0)
if (round(mc.getAttr(chue_nod_kho + '.ry')) == -360.):
mc.setAttr(chue_nod_kho + '.ry', 0)
if (round(mc.getAttr(chue_nod_kho + '.rz')) == -360.):
mc.setAttr(chue_nod_kho + '.rz', 0)
if (round(mc.getAttr(chue_nod_kho + '.rx')) % 360 == 180.
and round(mc.getAttr(chue_nod_kho + '.ry')) % 360 == 180.
and round(mc.getAttr(chue_nod_kho + '.rz')) % 360 == 180.):
mc.setAttr(chue_nod_kho + '.rx', 0)
mc.setAttr(chue_nod_kho + '.ry', 0)
mc.setAttr(chue_nod_kho + '.rz', 0)
if (b.getExternalRotationFlag()):
# ตั้งมุมการหมุนให้ข้อที่เปลี่ยนมุมตามการหมุนของข้ออื่น
chue_nod_effect = list_chue_nod_kho[
b.effect_index] # โหนดข้อที่ส่งผลให้
x = mc.getAttr(chue_nod_effect + '.jointOrientX')
y = mc.getAttr(chue_nod_effect + '.jointOrientY')
z = mc.getAttr(chue_nod_effect + '.jointOrientZ')
mc.setAttr(chue_nod_kho + '.jointOrientX', x)
mc.setAttr(chue_nod_kho + '.jointOrientY', y)
mc.setAttr(chue_nod_kho + '.jointOrientZ', z)
# ตั้งเอ็กซ์เพรชชันให้ข้อที่เปลี่ยนมุมตามการหมุนของข้ออื่น
ef = b.effect_factor
s = '%s.rotateX = %s.rotateX * %s;\n' % (chue_nod_kho,
chue_nod_effect, ef)
s += '%s.rotateY = %s.rotateY * %s;\n' % (chue_nod_kho,
chue_nod_effect, ef)
s += '%s.rotateZ = %s.rotateZ * %s;\n' % (chue_nod_kho,
chue_nod_effect, ef)
mc.expression(s=s,
n='expression_%s_%s' %
(chue_nod_kho, chue_nod_effect))
if (b.getExternalTranslationFlag()):
# ตั้งเอ็กซ์เพรชชันให้ข้อที่เลื่อนตำแหน่งตามตำแหน่งของข้ออื่น
chue_nod_effect = list_chue_nod_kho[
b.effect_index] # โหนดข้อที่ส่งผลให้
ef = b.effect_factor
s = '%s.translateX = %s.translateX * %s;\n' % (chue_nod_kho,
chue_nod_effect, ef)
s += '%s.translateY = %s.translateY * %s;\n' % (
chue_nod_kho, chue_nod_effect, ef)
s += '%s.translateZ = %s.translateZ * %s;\n' % (
chue_nod_kho, chue_nod_effect, ef)
mc.expression(s=s,
n='expression_%s_%s' %
(chue_nod_kho, chue_nod_effect))
if (b.ik):
list_mi_ik.append(i) # เก็บโหนดที่มี IK
# สร้าง IK ถ้าเลือกไว้ว่าให้สร้าง
if (ao_ik):
list_chue_nod_ik = [] # ลิสต์เก็บชื่อโหนด IK
for i in list_mi_ik:
b = mmddata.bones[i]
index_kho = [b.ik.target_index] + [l.bone_index for l in b.ik.link]
for j in range(0, len(b.ik.link)):
kho1 = list_chue_nod_kho[index_kho[j]]
kho2 = list_chue_nod_kho[index_kho[j + 1]]
mc.select(kho1, kho2)
chue_nod_ik = mc.ikHandle(n=list_chue_nod_kho[i] + '_IK',
sol='ikRPsolver')[0]
list_chue_nod_ik.append(chue_nod_ik)
nod_skin = pm.skinCluster(list_chue_nod_kho, chue_nod_poly, mi=4, tsb=1)
nod_poly = pm.PyNode(chue_nod_poly)
path_mesh = om.MDagPath()
sl = om.MSelectionList()
sl.add(nod_poly.fullPath())
sl.getDagPath(0, path_mesh)
obj_skin = om.MObject()
sl = om.MSelectionList()
sl.add(nod_skin.name())
sl.getDependNode(0, obj_skin)
fn_skin = oma.MFnSkinCluster(obj_skin)
sl = om.MSelectionList()
list_influ = []
for i, chue_nod_kho in enumerate(list_chue_nod_kho):
dagpath = om.MDagPath()
sl.add(pm.PyNode(chue_nod_kho).fullPath())
sl.getDagPath(i, dagpath)
idx = fn_skin.indexForInfluenceObject(dagpath)
list_influ.append(idx)
n_kho = len(mmddata.bones)
list_namnak = []
for v in mmddata.vertices:
namnak = [0.] * n_kho
d = v.deform
if (isinstance(d, pymeshio.pmx.Bdef1)):
# ส่วนที่ได้รับอิทธิพลจากแค่จุดเดียว
namnak[d.index0] = 1.
elif (isinstance(d, (pymeshio.pmx.Bdef2, pymeshio.pmx.Sdef))):
# ส่วนที่ได้รับอิทธิพลจาก 2 จุด
namnak[d.index0] += d.weight0
namnak[d.index1] += 1. - d.weight0
elif (isinstance(d, pymeshio.pmx.Bdef4)):
# ส่วนที่ได้รับอิทธิพลจาก 4 จุด
namnak[d.index0] += d.weight0
namnak[d.index1] += d.weight1
namnak[d.index2] += d.weight2
namnak[d.index3] += 1. - d.weight0 - d.weight1 - d.weight2
list_namnak.extend(namnak)
n_chut = len(mmddata.vertices) # จำนวนจุดยอด
util = om.MScriptUtil()
util.createFromList(list_namnak, n_kho * n_chut)
array_namnak = om.MDoubleArray(util.asDoublePtr(), n_kho * n_chut)
util = om.MScriptUtil()
util.createFromList(list_influ, n_kho)
array_influ = om.MIntArray(util.asIntPtr(), n_kho)
fn_compo = om.MFnSingleIndexedComponent()
compo = fn_compo.create(om.MFn.kMeshVertComponent)
util = om.MScriptUtil()
util.createFromList(range(n_chut), n_chut)
index_chut = om.MIntArray(util.asIntPtr(), n_chut)
fn_compo.addElements(index_chut)
# ตั้งค่าน้ำหนักของอิทธิพลที่แต่ละข้อมีต่อแต่ละจุดบนโพลิกอน
fn_skin.setWeights(path_mesh, compo, array_influ, array_namnak, 1)
for chue_nod_kho in list_chue_nod_kho:
if (chue_nod_kho not in list_chue_nod_nok):
mc.rename(chue_nod_kho,
chue_nod_kho.replace('_' + chue_nod_poly, ''))
return list_chue_nod_nok
def setWeights(self, componentList=[]):
'''
Apply the stored skinCluster weights to the specified skinCluster.
@param componentList: The list of components to apply skinCluster weights to.
@type componentList: str
'''
print(
'!!! - DEPRICATED: skinClusterData.setWeights()! Use loadWeights() method instead - !!!'
)
# ==========
# - Checks -
# ==========
# Check SkinCluster
skinCluster = self._data['name']
self.verifySkinCluster(skinCluster)
# Check Geometry
skinGeo = self._data['affectedGeometry'][0]
if not mc.objExists(skinGeo):
raise Exception(
'SkinCluster geometry "' + skinGeo +
'" does not exist! Use remapGeometry() to load skinCluster data to a different geometry!'
)
# Check Component List
if not componentList:
componentList = glTools.utils.component.getComponentStrList(
skinGeo)
componentSel = glTools.utils.selection.getSelectionElement(
componentList, 0)
# Get Component Index List
indexList = OpenMaya.MIntArray()
componentFn = OpenMaya.MFnSingleIndexedComponent(componentSel[1])
componentFn.getElements(indexList)
componentIndexList = list(indexList)
# ===========================
# - Set SkinCluster Weights -
# ===========================
# Build influence index array
infIndexArray = OpenMaya.MIntArray()
influenceList = mc.skinCluster(skinCluster, q=True, inf=True)
[infIndexArray.append(i) for i in range(len(influenceList))]
# Build master weight array
wtArray = OpenMaya.MDoubleArray()
oldWtArray = OpenMaya.MDoubleArray()
for c in componentIndexList:
for i in range(len(influenceList)):
if self._influenceData.has_key(influenceList[i]):
wtArray.append(
self._influenceData[influenceList[i]]['wt'][c])
else:
wtArray.append(0.0)
# Get skinCluster function set
skinFn = glTools.utils.skinCluster.getSkinClusterFn(skinCluster)
# Set skinCluster weights
skinFn.setWeights(componentSel[0], componentSel[1], infIndexArray,
wtArray, False, oldWtArray)
# =================
# - Return Result -
# =================
return influenceList
def writeWeights(self, fileName, exclusive):
# get the current selection
skinClusterNode = cmds.ls(selection=True, flatten=True)
if len(skinClusterNode) != 0:
skinClusterNode = skinClusterNode[0]
else:
OpenMaya.MGlobal.displayError(
"Select a skinCluster node to export.")
return -1
# check if it's a skinCluster
if cmds.nodeType(skinClusterNode) != "skinCluster":
OpenMaya.MGlobal.displayError(
"Selected node is not a skinCluster.")
return -1
# get the MFnSkinCluster
sel = OpenMaya.MSelectionList()
OpenMaya.MGlobal.getActiveSelectionList(sel)
skinClusterObject = OpenMaya.MObject()
sel.getDependNode(0, skinClusterObject)
skinClusterFn = OpenMayaAnim.MFnSkinCluster(skinClusterObject)
# get the influence objects
infls = cmds.skinCluster(skinClusterNode, query=True, influence=True)
if len(infls) == 0:
OpenMaya.MGlobal.displayError(
"No influence objects found for skinCluster {}.".format(
skinClusterNode))
return -1
# get the connected shape node
shape = cmds.skinCluster(skinClusterNode, query=True, geometry=True)[0]
if len(shape) == 0:
OpenMaya.MGlobal.displayError("No connected shape nodes found.")
return -1
# get the dag path of the shape node
cmds.select(shape, replace=True)
sel = OpenMaya.MSelectionList()
OpenMaya.MGlobal.getActiveSelectionList(sel)
shapeDag = OpenMaya.MDagPath()
sel.getDagPath(0, shapeDag)
# create the geometry iterator
geoIter = OpenMaya.MItGeometry(shapeDag)
# create a pointer object for the influence count of the MFnSkinCluster
infCount = OpenMaya.MScriptUtil()
infCountPtr = infCount.asUintPtr()
OpenMaya.MScriptUtil.setUint(infCountPtr, 0)
value = OpenMaya.MDoubleArray()
#
# default export to a single skin weights file
#
if not exclusive:
try:
with open(fileName, "w") as fileObj:
lines = []
nodes = []
# write all influences and the shape node to the file
for i in range(0, len(infls), 1):
nodes.append(infls[i])
nodes.append(shape)
lines.append(" ".join(nodes))
lines.append(skinClusterNode)
# write the attributes of the skinCluster node to the file
normalize = cmds.getAttr(skinClusterNode +
".normalizeWeights")
maxInfluences = cmds.getAttr(skinClusterNode +
".maxInfluences")
dropoff = cmds.getAttr(skinClusterNode + ".dropoff")[0][0]
lines.append("-nw {} -mi {} -dr {}".format(
normalize, maxInfluences, dropoff))
# get the skinCluster weights
while not geoIter.isDone():
skinClusterFn.getWeights(shapeDag,
geoIter.currentItem(), value,
infCountPtr)
for j in range(0, len(infls)):
if value[j] > 0:
lineArray = [
geoIter.index(), infls[j], j, value[j]
]
lines.append(str(lineArray))
geoIter.next()
lines.append("")
fileObj.write("\n".join(lines))
except:
OpenMaya.MGlobal.displayError(
"A file error has occurred for file: {}".format(fileName))
return -1
#
# custom export to individual files
#
else:
cmds.skinCluster(skinClusterNode,
edit=True,
forceNormalizeWeights=True)
dataPath = "{}/{}".format(fileName, skinClusterNode)
if not os.path.exists(dataPath):
try:
os.makedirs(dataPath)
except:
OpenMaya.MGlobal.displayError(
"Unable to create export directory: {}".format(
dataPath))
return -1
for j in range(0, len(infls)):
fileName = "{}/{}.bsw".format(dataPath, infls[j])
try:
with open(fileName, "w") as fileObj:
lines = []
while not geoIter.isDone():
skinClusterFn.getWeights(shapeDag,
geoIter.currentItem(),
value, infCountPtr)
line = "{} {}".format(str(geoIter.index()),
str(value[j]))
lines.append(line)
geoIter.next()
lines.append("")
fileObj.write("\n".join(lines))
except:
OpenMaya.MGlobal.displayError(
"A file error has occurred for file: {}".format(
fileName))
return -1
geoIter.reset()
return 1
def create_mdouble_array(self, array):
mdouble_array = OpenMaya.MDoubleArray()
for x in array:
mdouble_array.append(x)
return mdouble_array
def fillOptimized():
sel = cmds.ls(sl=1)
if not sel:
print "no mesh selected !"
return
obj=sel[0]
objList = OpenMaya.MSelectionList()
objList.add(obj)
path = OpenMaya.MDagPath()
objList.getDagPath(0,path)
path.extendToShape()
closest = OpenMaya.MMeshIntersector()
closest.create(path.node(),path.inclusiveMatrix())
try:
cmds.particleFill(rs=step,maxX=1,maxY=1,maxZ=1,minX=0,minY=0,minZ=0,pd=1.0,cp=True)
except RuntimeError:
pass
part = cmds.ls(sl=1)[0]
partShape = cmds.listRelatives(part,shapes=1)[0]
nplist = OpenMaya.MSelectionList()
nplist.add(partShape)
npobj = OpenMaya.MObject()
nplist.getDependNode(0,npobj)
npnode = OpenMaya.MFnDependencyNode(npobj)
nplug = npnode.findPlug("position")
nhdl = nplug.asMDataHandle()
ndata = OpenMaya.MFnVectorArrayData(nhdl.data())
radii = OpenMaya.MDoubleArray()
points = OpenMaya.MVectorArray()
points.copy(ndata.array())
cmds.delete(part)
mpom = MPointOnMesh()
radii_index = {}
for p in xrange(points.length()):
vec = points[p]
point = MPoint(vec)
closest.getClosestPoint(point, mpom)
closestPoint = mpom.getPoint()
radius = point.distanceTo(MPoint(closestPoint))
radii_index[p] = (vec, point, radius)
radii_sorted = sorted(radii_index.itervalues(), key=itemgetter(2), reverse=True)
newPoints = OpenMaya.MVectorArray()
newRadii = OpenMaya.MDoubleArray()
pointsRemain = lambda: len(radii_sorted)
while pointsRemain():
print "%s problem points still left..." % pointsRemain()
vec, p, radius = radii_sorted.pop(0)
newPoints.append(vec)
newRadii.append(radius*1.2)
for i in reversed(xrange(pointsRemain())):
vec2, p2, otherRadius = radii_sorted[i]
if p.distanceTo(p2) < (otherRadius + radius):
del radii_sorted[i]
#note: the default nParticle creation mode should be set to "points"
part = cmds.nParticle()[1]
plist = OpenMaya.MSelectionList()
plist.add(part)
newNPObj = OpenMaya.MObject()
dagPath = OpenMaya.MDagPath()
plist.getDependNode(0,newNPObj)
plist.getDagPath(0, dagPath)
name = dagPath.fullPathName()
newNPNode = OpenMaya.MFnDependencyNode(newNPObj)
newPosPlug = newNPNode.findPlug("position")
newNPHdl = newPosPlug.asMDataHandle()
newposdata = OpenMaya.MFnVectorArrayData(newNPHdl.data())
newposdata.set(newPoints)
newPosPlug.setMObject(newposdata.object())
prt = newNPNode.findPlug("particleRenderType")
prt.setInt(4)
isg = newNPNode.findPlug("ignoreSolverGravity")
isg.setInt(1)
tattr = OpenMaya.MFnTypedAttribute()
rpp = tattr.create("radiusPP","rpp",OpenMaya.MFnData.kDoubleArray)
newNPNode.addAttribute(rpp)
# rppPlug = newNPNode.findPlug("radiusPP")
# rpphdl = rppPlug.asMDataHandle()
# rppdata = OpenMaya.MFnDoubleArrayData(rpphdl.data())
# rppdata.set(newRadii)
# rppPlug.setMObject(rppdata.object())
fnParticleSys = MFnParticleSystem(newNPObj)
fnParticleSys.setPerParticleAttribute("radiusPP", newRadii)
print "finished."
def get_curve_info(name=False):
'''
used to get the curve data from a hand drawn curve in maya - for adding a new curve type to the
class structure
'''
if not name:
name = cmds.ls(sl=True)[0]
# sanity check
if not cmds.objExists(name):
print 'object %s not found, aborting' % name
return
# check for nurbs curve shape
if cmds.nodeType(name) == "nurbsCurve":
shape = name
else:
shpList = cmds.listRelatives(name, s=True)
shape = shpList[0]
# use the API to get the curve data
Mlist = OpenMaya.MSelectionList()
OpenMaya.MGlobal.getSelectionListByName(shape, Mlist)
dPath = OpenMaya.MDagPath()
Mlist.getDagPath(0, dPath)
crv = OpenMaya.MFnNurbsCurve(dPath)
degree = crv.degree()
cvs = OpenMaya.MPointArray()
knots = OpenMaya.MDoubleArray()
crv.getCVs(cvs)
crv.getKnots(knots)
# print to the script editor for use
print "DEGREE"
print degree
print "CVS"
length = cvs.length()
print "["
for i in range(length):
print('(' + ` cvs[i][0] ` + ',' + ` cvs[i][1] ` + ',' + ` cvs[i][2] ` +
'),')
print "]"
print "KNOTS"
print knots
#####################################
# CODE TESTING
#####################################
#test = ArcControl()
#test = CircleControl()
#test.setColour('green')
#test.set_position([0,1,0], [0,90,0])
#test.add_offset()
#test.hide_rotation()
#test.hide_translation()
#test.hide_scale()
#test.lock_hide("v")
#get_curve_info("curve1")
mesh_selection_list.getDagPath(0, mesh_dag_path)
joint_selection_list = om.MSelectionList()
joint_selection_list.add(joint_object)
joint_dag_path = om.MDagPath()
joint_selection_list.getDagPath(0, joint_dag_path)
skin_selection_list = om.MSelectionList()
skin_mobject = om.MObject()
om.MGlobal.getSelectionListByName(skin_object, skin_selection_list)
skin_selection_list.getDependNode(0, skin_mobject)
skin_mfn = oma.MFnSkinCluster(skin_mobject)
# get joint influcenced points and weight values
components = om.MSelectionList()
weights = om.MDoubleArray()
skin_mfn.getPointsAffectedByInfluence(joint_dag_path, components, weights)
# create cluster
components_list = list()
components.getSelectionStrings(components_list)
cluster_node = cmds.cluster(components_list)
cluster_selection_list = om.MSelectionList()
om.MGlobal.getSelectionListByName(cluster_node[0], cluster_selection_list)
cluster_mobject = om.MObject()
cluster_selection_list.getDependNode(0, cluster_mobject)
cluster_mfn = oma.MFnWeightGeometryFilter(cluster_mobject)
# get geometry's type to cluster weights type
geo_dag_path = om.MDagPath()
def doSimpleSolver(self):
'''
Solve single joint in the x-y plane
- first it calculates the angle between the handle and the end-effector.
- then it determines which way to rotate the joint.
'''
handle_group = self.handleGroup() # return a MIkHandleGroup
handle = handle_group.handle(0) # return a MObject
handlePath = OpenMaya.MDagPath.getAPathTo(
handle) # Determines the Path to the specified DAG Node
fnHandle = OpenMayaAnim.MFnIkHandle(
handlePath) # argument an Mobject, i supose we use an mdagpath,
# for possible duplicated objects
# get the position of the end_effector
end_effector = OpenMaya.MDagPath()
fnHandle.getEffector(end_effector)
tran = OpenMaya.MFnTransform(end_effector)
effector_position = tran.rotatePivot(OpenMaya.MSpace.kWorld)
# get the position of the handle
handle_positions = fnHandle.rotatePivot(OpenMaya.MSpace.kWorld)
# get the start joint position
start_joint = OpenMaya.MDagPath()
fnHandle.getStartJoint(
start_joint
) # start_joint is filled here with the getStartJoint method
start_tramsform = OpenMaya.MFnTransform(start_joint)
start_position = start_tramsform.rotatePivot(OpenMaya.MSpace.kWorld)
# calculate the rotation angle
v1 = start_position - effector_position
v2 = start_position - handle_positions
angle = v1.angle(v2)
# -------- Figure out which way to rotate --------
#
# define two vectors U and V as follows
# U = EndEffector(E) - StartJoint(S)
# N = Normal to U passing through EndEffector
#
# Clip handle_position to half-plane U to determine the region it
# lies in. Use the region to determine the rotation direction.
#
# U
# ^ Region Rotation
# | B
# (E)---N A C-C-W
# A | B C-W
# | B
# |
# (S)
#
rot = 0.0 # Rotation about z-axis
# U and N define a half-plane to clip the handle against
u = effector_position - start_position
u.normalize()
# Get a normal to U
zAxis = OpenMaya.MVector(0.0, 0.0, 1.0)
N = u ^ zAxis # cross product
N.normalize()
# P is the handle position vector
P = handle_positions - effector_position
# Determine the rotation direction
PdotN = P[0] * N[0] + P[1] * N[1]
if PdotN < 0:
rot = angle # counter-clockwise
else:
rot = -1.0 * angle # clockwise
# get and set the Joint Angles
jointAngles = OpenMaya.MDoubleArray()
try:
self._getJointAngles(jointAngles) # here fill jointAngles
except:
# getting angles failed, do nothing
pass
else:
jointAngles.set(jointAngles[0] + rot,
0) # set rotation in the array
self._setJointAngles(jointAngles) # set joint rotation
def testCreases(self):
cortexCube = IECoreScene.MeshPrimitive.createBox(
imath.Box3f(imath.V3f(-1), imath.V3f(1)))
cornerIds = [5]
cornerSharpnesses = [10.0]
cortexCube.setCorners(IECore.IntVectorData(cornerIds),
IECore.FloatVectorData(cornerSharpnesses))
creaseLengths = [3, 2]
creaseIds = [1, 2, 3, 4, 5] # note that these are vertex ids
creaseSharpnesses = [1, 5]
cortexCube.setCreases(IECore.IntVectorData(creaseLengths),
IECore.IntVectorData(creaseIds),
IECore.FloatVectorData(creaseSharpnesses))
converter = IECoreMaya.ToMayaObjectConverter.create(cortexCube)
transform = maya.cmds.createNode("transform")
self.assertTrue(converter.convert(transform))
mayaMesh = maya.cmds.listRelatives(transform, shapes=True)[0]
l = OpenMaya.MSelectionList()
l.add(mayaMesh)
p = OpenMaya.MDagPath()
l.getDagPath(0, p)
fnMesh = OpenMaya.MFnMesh(p)
# Test corners
cornerIds = OpenMaya.MUintArray()
cornerSharpnesses = OpenMaya.MDoubleArray()
fnMesh.getCreaseVertices(cornerIds, cornerSharpnesses)
testIds = OpenMaya.MUintArray()
testIds.append(5)
self.assertEqual(cornerIds, testIds)
testSharpnesses = OpenMaya.MFloatArray()
testSharpnesses.append(10)
self.assertEqual(cornerSharpnesses, testSharpnesses)
# Test edges
edgeIds = OpenMaya.MUintArray()
edgeSharpnesses = OpenMaya.MDoubleArray()
fnMesh.getCreaseEdges(edgeIds, edgeSharpnesses)
util = OpenMaya.MScriptUtil()
result = []
for edgeId, sharpness in zip(edgeIds, edgeSharpnesses):
edgeVertices = util.asInt2Ptr()
fnMesh.getEdgeVertices(edgeId, edgeVertices)
result.append((util.getInt2ArrayItem(edgeVertices, 0, 1),
util.getInt2ArrayItem(edgeVertices, 0,
0), sharpness))
# we compare sets because maya reorders by edge index
self.assertEqual(set(result),
set([(1, 2, 1.0), (2, 3, 1.0), (4, 5, 5.0)]))
def setBlendWeights(skinCls, dagPath, components, dataDic):
blendWeights = OpenMaya.MDoubleArray(len(dataDic['blendWeights']))
for i, w in enumerate(dataDic['blendWeights']):
blendWeights.set(w, i)
skinCls.__apimfn__().setBlendWeights(dagPath, components, blendWeights)
def create_anim_curve_node(
times,
values,
node_attr=None,
tangent_in_type=OpenMayaAnim.MFnAnimCurve.kTangentGlobal,
tangent_out_type=OpenMayaAnim.MFnAnimCurve.kTangentGlobal,
anim_type=OpenMayaAnim.MFnAnimCurve.kAnimCurveTL,
undo_cache=None):
"""
Create an animCurve using the Maya API
:param times: Time values for the animCurve
:type times: list
:param values: Values for the animCurve.
:type values: list
:param node_attr: The 'plug' to connect the animCurve to.
:type node_attr: str
:param tangent_in_type: The "in" tangent type for keyframes.
:param tangent_out_type: The "out" tangent type for keyframes.
:param anim_type: The type of animation curve node.
:param undo_cache: The Maya AnimCurve Undo Cache data structure.
:return:
"""
if not isinstance(times, list):
raise ValueError('times must be a list or sequence type.')
if not isinstance(values, list):
raise ValueError('times must be a list or sequence type.')
if len(times) == 0:
raise ValueError('times must have 1 or more values.')
if len(values) == 0:
raise ValueError('values must have 1 or more values.')
if len(times) != len(values):
raise ValueError('Number of times and values does not match.')
# create anim curve
animfn = OpenMayaAnim.MFnAnimCurve()
if node_attr is None:
animCurve = animfn.create(anim_type)
else:
# Get the plug to be animated.
dst_plug = utils.get_as_plug(node_attr)
objs = OpenMaya.MObjectArray()
find = OpenMayaAnim.MAnimUtil.findAnimation(dst_plug, objs)
if find is True and objs.length() > 0:
animfn = OpenMayaAnim.MFnAnimCurve(objs[0])
else:
animfn = OpenMayaAnim.MFnAnimCurve()
animfn.create(dst_plug)
# Copy the times into an MTimeArray and the values into an MDoubleArray.
time_array = OpenMaya.MTimeArray()
value_array = OpenMaya.MDoubleArray()
for time, value in zip(times, values):
time_array.append(OpenMaya.MTime(time, OpenMaya.MTime.uiUnit()))
value_array.append(value)
# force a default undo cache
if not undo_cache:
undo_cache = OpenMayaAnim.MAnimCurveChange()
# Add the keys to the animCurve.
animfn.addKeys(
time_array,
value_array,
tangent_in_type,
tangent_out_type,
False, # overwrite any keys that get in our way
undo_cache)
return animfn
def get_blend_weights(self, dag_path, components):
weights = om.MDoubleArray()
self.fn.getBlendWeights(dag_path, components, weights)
self.data['blendWeights'] = [
weights[i] for i in xrange(weights.length())
]
def buildData(self, surface, worldSpace=False):
'''
Build NurbsSurfaceData class.
@param surface: Surface to build data from
@type surface: str
'''
# ==========
# - Checks -
# ==========
# Check Surface
if not glTools.utils.surface.isSurface(surface):
raise Exception('Object "' + surface +
'" is not a vaild NURBS surface node!')
# World Space
space = OpenMaya.MSpace.kObject
if worldSpace: space = OpenMaya.MSpace.kWorld
# ==============
# - Build Data -
# ==============
# Start timer
timer = mc.timerX()
# Get basic surface info
self._data['name'] = surface
# Get Surface Function Class
surfaceFn = glTools.utils.surface.getSurfaceFn(surface)
# Get Surface Degree and Form
self._data['degreeU'] = surfaceFn.degreeU()
self._data['degreeV'] = surfaceFn.degreeV()
self._data['formU'] = int(surfaceFn.formInU())
self._data['formV'] = int(surfaceFn.formInV())
# Get Surface Knots
knotsUarray = OpenMaya.MDoubleArray()
knotsVarray = OpenMaya.MDoubleArray()
surfaceFn.getKnotsInU(knotsUarray)
surfaceFn.getKnotsInV(knotsVarray)
self._data['knotsU'] = list(knotsUarray)
self._data['knotsV'] = list(knotsVarray)
# Get Control Vertices
cvArray = OpenMaya.MPointArray()
surfaceFn.getCVs(cvArray, space)
self._data['cv'] = [(cvArray[i].x, cvArray[i].y, cvArray[i].z)
for i in range(cvArray.length())]
# =================
# - Return Result -
# =================
# Print timer result
buildTime = mc.timerX(st=timer)
print('NurbsSurfaceData: Data build time for surface "' + surface +
'": ' + str(buildTime))
return self._data['name']
def ExportMesh(filepath, meshShapedagPath):
meshFn = OpenMaya.MFnMesh(meshShapedagPath)
meshIntersector = OpenMaya.MMeshIntersector()
meshIntersector.create(meshShapedagPath.node())
faceIdList = []
baryCoordList = []
points = OpenMaya.MPointArray()
meshFn.getPoints(points, OpenMaya.MSpace.kWorld)
normals = OpenMaya.MFloatVectorArray()
meshFn.getVertexNormals(False, normals, OpenMaya.MSpace.kWorld)
triangleCounts = OpenMaya.MIntArray()
triangleVertexIndices = OpenMaya.MIntArray(
) # the size of this array is three times of the number of total triangles
meshFn.getTriangles(triangleCounts, triangleVertexIndices)
#-------------------------
# Get skin cluster object
#-------------------------
skinClusterName = ''
mesh_shape_name = meshFn.name()
skinClusters = cmds.listHistory(mesh_shape_name)
skinClusters = cmds.ls(skinClusters, type="skinCluster")
if skinClusters:
skinClusterName = skinClusters[0]
else:
cmds.warning('No skin cluster found on ' + mesh_shape_name)
return
#print skinClusterName
# get the MFnSkinCluster using skinClusterName
selList = OpenMaya.MSelectionList()
selList.add(skinClusterName)
skinClusterNode = OpenMaya.MObject()
selList.getDependNode(0, skinClusterNode)
skinFn = OpenMayaAnim.MFnSkinCluster(skinClusterNode)
dagPaths = MDagPathArray()
skinFn.influenceObjects(dagPaths)
# influence object is a joint
influenceObjectsNames = []
# get joint names
for i in range(dagPaths.length()):
influenceName = dagPaths[i].partialPathName()
influenceObjectsNames.append(
influenceName) # Need to remove namespace?
skinMeshes = cmds.skinCluster(skinClusterName, query=1, geometry=1)
geoIter = OpenMaya.MItGeometry(meshShapedagPath)
infCount = OpenMaya.MScriptUtil()
infCountPtr = infCount.asUintPtr()
numVertices = geoIter.count()
weightArray = [
0
] * TRESSFX_MAX_INFLUENTIAL_BONE_COUNT * numVertices # joint weight array for all vertices. Each vertex will have TRESSFX_MAX_INFLUENTIAL_BONE_COUNT weights.
# It is initialized with zero for empty weight in case there are less weights than TRESSFX_MAX_INFLUENTIAL_BONE_COUNT .
jointIndexArray = [
-1
] * TRESSFX_MAX_INFLUENTIAL_BONE_COUNT * numVertices # joint index array for all vertices. It is initialized with -1 for an empty element in case
# there are less weights than TRESSFX_MAX_INFLUENTIAL_BONE_COUNT .
# collect bone weights for all vertices in the mesh
index = 0
progressBar = ProgressBar('Collect data', numVertices)
while geoIter.isDone() == False:
weights = OpenMaya.MDoubleArray()
skinFn.getWeights(meshShapedagPath, geoIter.currentItem(), weights,
infCountPtr)
weightJointIndexPairs = []
for i in range(len(weights)):
pair = WeightJointIndexPair()
pair.weight = weights[i]
pair.joint_index = i
weightJointIndexPairs.append(pair)
weightJointIndexPairs.sort()
a = 0
for j in range(
min(len(weightJointIndexPairs),
TRESSFX_MAX_INFLUENTIAL_BONE_COUNT)):
weightArray[index * TRESSFX_MAX_INFLUENTIAL_BONE_COUNT +
a] = weightJointIndexPairs[j].weight
jointIndexArray[index * TRESSFX_MAX_INFLUENTIAL_BONE_COUNT +
a] = weightJointIndexPairs[j].joint_index
a += 1
index += 1
progressBar.Increment()
geoIter.next()
progressBar.Kill()
#----------------------------------------------------------
# We collected all necessary data. Now save them in file.
#----------------------------------------------------------
totalProgress = points.length() + triangleVertexIndices.length() / 3 + len(
influenceObjectsNames)
progressBar = ProgressBar('Export collision mesh', totalProgress)
f = open(filepath, "w")
f.write("# TressFX collision mesh exported by TressFX Exporter in Maya\n")
# Write all bone (joint) names
f.write("numOfBones %g\n" % (len(influenceObjectsNames)))
f.write("# bone index, bone name\n")
for i in range(len(influenceObjectsNames)):
f.write("%d %s\n" % (i, influenceObjectsNames[i]))
progressBar.Increment()
# write vertex positions and skinning data
f.write("numOfVertices %g\n" % (points.length()))
f.write(
"# vertex index, vertex position x, y, z, normal x, y, z, joint index 0, joint index 1, joint index 2, joint index 3, weight 0, weight 1, weight 2, weight 3\n"
)
for vertexIndex in xrange(points.length()):
point = points[vertexIndex]
normal = normals[vertexIndex]
weightJointIndexPairs = GetSortedWeightsFromOneVertex(
TRESSFX_MAX_INFLUENTIAL_BONE_COUNT, vertexIndex, jointIndexArray,
weightArray)
f.write(
"%g %g %g %g %g %g %g %g %g %g %g %g %g %g %g\n" %
(vertexIndex, point.x, point.y, point.z, normal.x, normal.y,
normal.z, weightJointIndexPairs[0].joint_index,
weightJointIndexPairs[1].joint_index,
weightJointIndexPairs[2].joint_index,
weightJointIndexPairs[3].joint_index,
weightJointIndexPairs[0].weight, weightJointIndexPairs[1].weight,
weightJointIndexPairs[2].weight, weightJointIndexPairs[3].weight))
progressBar.Increment()
# write triangle face indices
f.write("numOfTriangles %g\n" % (triangleVertexIndices.length() / 3))
f.write(
"# triangle index, vertex index 0, vertex index 1, vertex index 2\n")
for i in range(triangleVertexIndices.length() / 3):
f.write("%g %d %d %d\n" % (i, triangleVertexIndices[i * 3 + 0],
triangleVertexIndices[i * 3 + 1],
triangleVertexIndices[i * 3 + 2]))
progressBar.Increment()
f.close()
progressBar.Kill()
return
def calculateWeights(self, value, weightsO, weightsC, numI, numC):
"""
Calculate the new weights of the parsed index. The new weights are
calculated by blending the weights of the connected vertices, this is
done with the factor of the value. The value is parsed by the context
and can range from 0-1 depending on where the point is in the paint
brush. Locked influences, normalization and maintaining maximum
influences are taken into account as they are set on the skin cluster.
:param float value: Blend factor
:param OpenMaya.MDoubleArray weightsO: Weights of original
:param OpenMaya.MDoubleArray weightsC: Weights of connected
:param int numI: Influences of original
:param int numC: Influences of connected
:return: New weights, new influences
:rtype: tuple(OpenMaya.MDoubleArray, OpenMaya.MIntArray)
"""
# weight variables
weightsNew = OpenMaya.MDoubleArray()
influenceNew = OpenMaya.MIntArray()
# blend weights
for i in range(numI):
influenceNew.append(i)
weightsNew.append(0.0)
# if influence is locked dont change value
if self.influencesLocked[i]:
weightsNew[i] = weightsO[i]
continue
# blend weights with connected vertices
for j in range(i, len(weightsC), numI):
w = ((weightsO[i] / numC) *
(1 - value)) + ((weightsC[j] / numC) * value)
weightsNew[i] += w
# force max influences by removing excess weights
if self.maintainMaxInfluences:
weights = zip(weightsNew, influenceNew)
excess = sorted(weights, reverse=True)[self.maxInfluences:]
for e in excess:
weightsNew[e[1]] = 0.0
# normalize weights to one
if self.normalizeMode == 1:
# get total locked weights
lockedTotal = sum([
weightsNew[i] for i in range(weightsNew.length())
if self.influencesLocked[i]
])
# get total to blend
total = sum(weightsNew) - lockedTotal
# get multiply factor
if lockedTotal >= 1.0 or total == 0.0:
factor = 0
else:
factor = (1.0 - lockedTotal) / total
# apply multiply factor
for i in range(weightsNew.length()):
if self.influencesLocked[i]:
continue
weightsNew[i] = weightsNew[i] * factor
return weightsNew, influenceNew
