def print_from_mp5():
mp5_as_json = "".join(sys.stdin.readlines())
mp5 = json.loads(mp5_as_json)
config_select = {
0: "mp5slicer/config/config.mp5",
1: "mp5slicer/config/config_0.mp5",
2: "mp5slicer/config/config_1.mp5"
}
dict_conf_file = config_select[mp5['printerSettings']['config_select']]
with open(dict_conf_file) as data_file:
dict_conf = json.load(data_file)
# hack to force config to_file in print_from_file_cpp to true
dict_conf['TO_FILE'] = True
if 'printerSettings' in mp5:
ConfigFactory(dict_conf=dict_conf)
else:
ConfigFactory()
import mp5slicer.config.config as config
config.reset()
combined_mesh = build_geometry(mp5)
print_mesh(combined_mesh, "mp5")
def print_from_mp5():
mp5_as_json = "".join(sys.stdin.readlines())
mp5 = json.loads(mp5_as_json)
run_ConfigFactory_on_MP5_file(mp5, False)
import mp5slicer.config.config as config
config.reset()
combined_mesh = build_geometry(mp5)
print_mesh(combined_mesh, "mp5")
def print_from_file():
args = sys.argv
args = args[1:]
stl_file_name = args[0]
conf_file_name = args[1]
ConfigFactory(conf_file_name)
import mp5slicer.config.config as config
config.reset()
mesh = get_stl_from_file(stl_file_name)
print_mesh(mesh, stl_file_name)
def print_from_pipe():
conf_file_name = sys.argv[1]
ConfigFactory(conf_file_name)
import mp5slicer.config.config as config
config.reset()
# mp5_as_json = "".join(sys.stdin.readlines())
mp5 = '{"printerSettings":{"name":"test","layerThickness":0.2,"emptyLayer":0,"infillSpace":4,"topThickness":0.6,"paramSamples":75,"speedRate":1000,"circleSpeedRate":1000,"temperature":220,"inAirSpeed":7000,"flowRate":0.035,"criticalLength":35,"retractionSpeed":2400,"retractionLength":5,"shellNumber":3,"material":"PLA 2.85mm","autoZScar":true,"zScarGap":0.5,"critLayerTime":6,"filamentDiameter":2.85},"mp5-version":"0.3","root":{"type":"root","children":[{"type":"Difference","protected":false,"children":[{"type":"cylinder","displayColor":{"x":0.7675997200783986,"y":0.03892568708507049,"z":0.1754374135888661},"matrix":[46.276738560910324,0,0,0,0,71.03955320184234,0,0,0,0,10,0,0,0,0,1],"index":652818},{"type":"cylinder","displayColor":{"x":0.11421729990684737,"y":0.07562705374348999,"z":0.6324600862122098},"matrix":[43.70523314805503,0,0,-0.03336494987031813,0,23.811935098864172,0,-1.473401670043664,0,0,23.811935098864172,5.569059618774723,0,0,0,1],"index":2463576}],"initialSize":{"x":1,"y":1,"z":1},"displayColor":{"x":0.6745098039215687,"y":0.47843137254901963,"z":0.6509803921568628},"matrix":[0.7697738537889303,0,0,4.16759433777402,0,0.030894923516336208,-0.7691536190371745,1.3949227857422084,0,0.7691536190371742,0.030894923516336176,27.65249099731288,0,0,0,1],"index":1939910}]}}'
mp5 = json.loads(mp5)
stl = puppy_magic(mp5)
# stl.save("mp5.stl")
print_mesh(stl, "mp5")
def print_from_pipe():
import mp5slicer.config.config as config
# conf_file_name = sys.argv[1]
# ConfigFactory(conf_file_name)
# import mp5slicer.config.config as config
# config.reset()
# mp5_as_json = "".join(sys.stdin.readlines())
# mp5 = '{"printerSettings":{"name":"test","layerThickness":0.2,"emptyLayer":0,"infillSpace":4,"topThickness":0.6,"paramSamples":75,"speedRate":1000,"circleSpeedRate":1000,"temperature":220,"inAirSpeed":7000,"flowRate":0.035,"criticalLength":35,"retractionSpeed":2400,"retractionLength":5,"shellNumber":3,"material":"PLA 2.85mm","autoZScar":true,"zScarGap":0.5,"critLayerTime":6,"filamentDiameter":2.85},"mp5-version":"0.3","root":{"type":"root","children":[{"type":"Difference","protected":false,"children":[{"type":"cylinder","displayColor":{"x":0.7675997200783986,"y":0.03892568708507049,"z":0.1754374135888661},"matrix":[46.276738560910324,0,0,0,0,71.03955320184234,0,0,0,0,10,0,0,0,0,1],"index":652818},{"type":"cylinder","displayColor":{"x":0.11421729990684737,"y":0.07562705374348999,"z":0.6324600862122098},"matrix":[43.70523314805503,0,0,-0.03336494987031813,0,23.811935098864172,0,-1.473401670043664,0,0,23.811935098864172,5.569059618774723,0,0,0,1],"index":2463576}],"initialSize":{"x":1,"y":1,"z":1},"displayColor":{"x":0.6745098039215687,"y":0.47843137254901963,"z":0.6509803921568628},"matrix":[0.7697738537889303,0,0,4.16759433777402,0,0.030894923516336208,-0.7691536190371745,1.3949227857422084,0,0.7691536190371742,0.030894923516336176,27.65249099731288,0,0,0,1],"index":1939910}]}}'
# double mushroom
mp5 = '{"printerSettings":{"LAYER_THICKNESS":0.2, "TO_FILE":true},"mp5-version":"0.3","root":{"type":"root","children":[{"type":"implicit_double_mushroom","displayColor":{"x":6,"y":0.7,"z":0.7},"matrix":[10,0,0,84.55341967686932,0,10,0,121.11403382006986,0,0,10,5,0,0,0,1],"index":2375196}]}}'
# cube
# mp5 = '''{"printerSettings":{"LAYER_THICKNESS":0.2, "TO_FILE":true},
# "mp5-version":"0.3","root":{"type":"root","children":[{"type":"icube","displayColor":{"x":0.7,"y":0.7,"z":7},
# "matrix":[10,0,0,0,
# 0,10,0,0,
# 0,0,10,0,
# 0,0,0,1],
# "index":5498993}]}}'''
# tetrahedron
# mp5 = '{"printerSettings":{"LAYER_THICKNESS":0.2, "TO_FILE":true},"mp5-version":"0.3","root":{"type":"root","children":[{"type":"tetrahedron","displayColor":{"x":0.71,"y":0.164,"z":0},"matrix":[10,0,0,122.29212041120184,0,10,0,114.23374799066498,0,0,10,5.000000000211934,0,0,0,1],"corners":[[0,0,0.31649658092772615],[0.5,0,-0.5],[-0.5,0.5,-0.5],[-0.5,-0.5,-0.5]],"index":3194877}]}}'
# ellisoid
# mp5 = '{"printerSettings":{"LAYER_THICKNESS":0.2, "TO_FILE":true},"mp5-version":"0.3","root":{"type":"root","children":[{"type":"iellipsoid", "matrix":[10,0,0,0, 0,10,0,0, 0,0,10,0, 0,0,0,1],"index":5498993}]}}'
stls = []
mp5 = json.loads(mp5)
ConfigFactory(dict_conf=mp5['printerSettings'])
config.reset()
for son_position in range(len(mp5["root"]["children"])):
mc = get_mc_params(mp5, son_position)
mc_params = to_json_mc_params(mc)
mp5_string = json.dumps(mp5["root"]["children"][son_position])
pymplicit.build_geometry(mp5_string, mc_params)
verts = pymplicit.get_verts()
faces = pymplicit.get_faces()
pymplicit.finish_geometry()
stl = m2stl_mesh(verts, faces)
stls.append(stl.data)
combined_stl = mesh.Mesh(np.concatenate(stls))
combined_stl.save("mp5.stl")
print_mesh(combined_stl, "mp5")
def print_from_mp5():
mp5_file_name = sys.argv[2]
conf_file_name = sys.argv[1]
ConfigFactory(conf_file_name)
import mp5slicer.config.config as config
config.reset()
mp5 = json.load(open(mp5_file_name))
stl = puppy_magic(mp5)
# iobj = json2implicit_func(json)
# iobj.implicitGradient(x)
# iobj.implicitFunction(x)
# stl = demo_combination_plus_qem(iobj)
stl.save("mp5.stl")
print_mesh(stl, "mp5")
def print_from_mp5_file():
args = sys.argv
args = args[1:]
mp5_file_path = args[0]
# ConfigFactory(user_config_mp5, printer_config_mp5, filament_config_mp5)
with open(mp5_file_path) as data_file:
mp5_file = json.load(data_file)
run_ConfigFactory_on_MP5_file(mp5_file, True)
import mp5slicer.config.config as config
config.reset()
combined_mesh = build_geometry(mp5_file)
print_mesh(combined_mesh, "mp5")
def print_from_pipe():
mp5_as_json = "".join(sys.stdin.readlines())
mp5 = json.loads(mp5_as_json)
config_select = {0:"mp5slicer/config/config.json",
1:"mp5slicer/config/config_0.json",
2:"mp5slicer/config/config_1.json"}
dict_conf_file = config_select[mp5['printerSettings']['config_select']]
with open(dict_conf_file) as data_file:
dict_conf = json.load(data_file)
# hack to force config to_file in print_from_file_cpp to true
dict_conf['TO_FILE'] = False
if 'printerSettings' in mp5:
ConfigFactory(dict_conf=dict_conf)
else:
ConfigFactory()
import mp5slicer.config.config as config
config.reset()
stls = []
for son_position in range(len(mp5["root"]["children"])):
mc = get_mc_params(mp5, son_position)
mc_params = to_json_mc_params(mc)
mp5_string = json.dumps(mp5["root"]["children"][son_position])
pymplicit.build_geometry(mp5_string, mc_params)
verts = pymplicit.get_verts()
faces = pymplicit.get_faces()
pymplicit.finish_geometry()
stl = m2stl_mesh(verts, faces)
stls.append(stl.data)
stl = mesh.Mesh(np.concatenate(stls))
# stl = puppy_magic(mp5)
# stl.save("mp5.stl")
print_mesh(stl, "mp5")
def print_from_file_next_generation():
args = sys.argv
args = args[1:]
stl_file_name = args[0]
default_config_mp5_path = args[1]
user_config_mp5_path = args[2]
printer_config_mp5_path = args[3]
filament_config_mp5_path = args[4]
print_from_file_config_mp5_path = args[5]
# ConfigFactory(user_config_mp5, printer_config_mp5, filament_config_mp5)
ConfigFactoryNextGeneration(
['default', 'user', 'printer', 'filament', 'print_from_file'],
[4, 1, 2, 3, 0], default_config_mp5_path, user_config_mp5_path,
printer_config_mp5_path, filament_config_mp5_path,
print_from_file_config_mp5_path)
import mp5slicer.config.config as config
config.reset()
mesh = get_stl_from_file(stl_file_name)
print_mesh(mesh, stl_file_name)