def __init__(self, configfile=MS_CONFIG, config=None, configregen=False):
self.storage_lock = threading.Lock()
self.storage_counter = ThreadCounter()
# Load all storage classes
storage_classes = _get_storage_classes()
# Read in config
if configfile:
configfile = utils.get_config_path(MS_CONFIG, 'storage')
config_object = configparser.SafeConfigParser()
config_object.optionxform = str
# Regen the config if needed or wanted
if configregen or not os.path.isfile(configfile):
_write_main_config(config_object)
_rewrite_config(storage_classes, config_object, configfile)
config_object.read(configfile)
if config:
file_conf = utils.parse_config(config_object)
for key in config:
if key not in file_conf:
file_conf[key] = config[key]
file_conf[key]['_load_default'] = True
else:
file_conf[key].update(config[key])
config = file_conf
else:
config = utils.parse_config(config_object)
else:
if config is None:
config = {}
for storage_name in storage_classes:
config[storage_name] = {}
config['_load_default'] = True
self.sleep_time = config.get('main', {}).get('retry_time', DEFAULTCONF['retry_time'])
self.num_retries = config.get('main', {}).get('retry_num', DEFAULTCONF['retry_num'])
# Set the config inside of the storage classes
for storage_name in storage_classes:
if storage_name in config:
if '_load_default' in config or '_load_default' in config[storage_name]:
# Remove _load_default from config
if '_load_default' in config[storage_name]:
del config[storage_name]['_load_default']
# Update the default storage config
storage_classes[storage_name].config = storage_classes[storage_name].DEFAULTCONF
storage_classes[storage_name].config.update(config[storage_name])
else:
storage_classes[storage_name].config = config[storage_name]
self.storage_classes = storage_classes
self.loaded_storage = {}
# Setup each enabled storage
self.load_modules()
def __init__(self, debug=False):
storage_conf = utils.get_config_path(MS_CONFIG, 'storage')
config_object = configparser.SafeConfigParser()
config_object.optionxform = str
config_object.read(storage_conf)
conf = utils.parse_config(config_object)
storage_handler = storage.StorageHandler(configfile=storage_conf)
es_handler = storage_handler.load_required_module('ElasticSearchStorage')
if not es_handler:
print('[!] ERROR: This analytic only works with ES storage module.')
sys.exit(0)
# probably not ideal...
self.es = es_handler.es
self.index = conf['ElasticSearchStorage']['index']
self.doc_type = '_doc'
self.debug = debug
def multiscanner_process(work_queue, config, batch_size, wait_seconds, delete,
exit_signal):
filelist = []
time_stamp = None
storage_conf = utils.get_config_path(config, 'storage')
storage_handler = storage.StorageHandler(configfile=storage_conf)
while not exit_signal.value:
time.sleep(1)
try:
filelist.append(work_queue.get_nowait())
if not time_stamp:
time_stamp = time.time()
while len(filelist) < batch_size:
filelist.append(work_queue.get_nowait())
except queue.Empty:
if filelist and time_stamp:
if len(filelist) >= batch_size:
pass
elif time.time() - time_stamp > wait_seconds:
pass
else:
continue
else:
continue
resultlist = multiscan(filelist, configfile=config)
results = parse_reports(resultlist, python=True)
if delete:
for file_name in results:
os.remove(file_name)
storage_handler.store(results, wait=False)
print('Scanned', len(results), 'files')
filelist = []
time_stamp = None
storage_handler.close()
def multiscanner_process(work_queue, config, batch_size, wait_seconds, delete, exit_signal):
filelist = []
time_stamp = None
storage_conf = utils.get_config_path(config, 'storage')
storage_handler = storage.StorageHandler(configfile=storage_conf)
while not exit_signal.value:
time.sleep(1)
try:
filelist.append(work_queue.get_nowait())
if not time_stamp:
time_stamp = time.time()
while len(filelist) < batch_size:
filelist.append(work_queue.get_nowait())
except queue.Empty:
if filelist and time_stamp:
if len(filelist) >= batch_size:
pass
elif time.time() - time_stamp > wait_seconds:
pass
else:
continue
else:
continue
resultlist = multiscan(filelist, configfile=config)
results = parse_reports(resultlist, python=True)
if delete:
for file_name in results:
os.remove(file_name)
storage_handler.store(results, wait=False)
print('Scanned', len(results), 'files')
filelist = []
time_stamp = None
storage_handler.close()
class CustomJSONEncoder(JSONEncoder):
def default(self, obj):
if isinstance(obj, datetime):
if obj.utcoffset() is not None:
obj = obj - obj.utcoffset()
return str(obj)
else:
return JSONEncoder.default(self, obj)
app = Flask(__name__)
app.json_encoder = CustomJSONEncoder
api_config_object = configparser.SafeConfigParser()
api_config_object.optionxform = str
# TODO: Why does this multiscanner.common instead of just common?
api_config_file = utils.get_config_path(MS_CONFIG, 'api')
api_config_object.read(api_config_file)
if not api_config_object.has_section('api') or not os.path.isfile(
api_config_file):
# Write default config
api_config_object.add_section('api')
for key in DEFAULTCONF:
api_config_object.set('api', key, str(DEFAULTCONF[key]))
conffile = codecs.open(api_config_file, 'w', 'utf-8')
api_config_object.write(conffile)
conffile.close()
api_config = utils.parse_config(api_config_object)
# TODO: fix this mess
# Needs api_config in order to function properly
from multiscanner.distributed.celery_worker import multiscanner_celery, ssdeep_compare_celery
def multiscanner_celery(file_, original_filename, task_id, file_hash, metadata,
config=MS_CONFIG, module_list=None):
'''
Queue up multiscanner tasks
Usage:
from celery_worker import multiscanner_celery
multiscanner_celery.delay(full_path, original_filename, task_id,
hashed_filename, metadata, config, module_list)
'''
# Initialize the connection to the task DB
db.init_db()
logger.info('\n\n{}{}Got file: {}.\nOriginal filename: {}.\n'.format('=' * 48, '\n', file_hash, original_filename))
# Get the storage config
storage_conf = utils.get_config_path(config, 'storage')
storage_handler = storage.StorageHandler(configfile=storage_conf)
resultlist = multiscan(
[file_],
configfile=config,
module_list=module_list
)
results = parse_reports(resultlist, python=True)
scan_time = datetime.now().isoformat()
# Get the Scan Config that the task was run with and
# add it to the task metadata
scan_config_object = configparser.SafeConfigParser()
scan_config_object.optionxform = str
scan_config_object.read(config)
full_conf = utils.parse_config(scan_config_object)
sub_conf = {}
# Count number of modules enabled out of total possible
# and add it to the Scan Metadata
total_enabled = 0
total_modules = len(full_conf.keys())
# Get the count of modules enabled from the module_list
# if it exists, else count via the config
if module_list:
total_enabled = len(module_list)
else:
for key in full_conf:
if key == 'main':
continue
sub_conf[key] = {}
sub_conf[key]['ENABLED'] = full_conf[key]['ENABLED']
if sub_conf[key]['ENABLED'] is True:
total_enabled += 1
results[file_]['Scan Metadata'] = metadata
results[file_]['Scan Metadata']['Worker Node'] = gethostname()
results[file_]['Scan Metadata']['Scan Config'] = sub_conf
results[file_]['Scan Metadata']['Modules Enabled'] = '{} / {}'.format(
total_enabled, total_modules
)
results[file_]['Scan Metadata']['Scan Time'] = scan_time
results[file_]['Scan Metadata']['Task ID'] = task_id
# Use the original filename as the value for the filename
# in the report (instead of the tmp path assigned to the file
# by the REST API)
results[original_filename] = results[file_]
del results[file_]
# Save the reports to storage
storage_ids = storage_handler.store(results, wait=False)
storage_handler.close()
# Only need to raise ValueError here,
# Further cleanup will be handled by the on_failure method
# of MultiScannerTask
if not storage_ids:
raise ValueError('Report failed to index')
# Update the task DB to reflect that the task is done
db.update_task(
task_id=task_id,
task_status='Complete',
timestamp=scan_time,
)
logger.info('Completed Task #{}'.format(task_id))
return results
logger = get_task_logger(__name__)
DEFAULTCONF = {
'protocol': 'pyamqp',
'host': 'localhost',
'user': '******',
'password': '',
'vhost': '/',
'flush_every': '100',
'flush_interval': '10',
'tz': 'US/Eastern',
}
config_object = configparser.SafeConfigParser()
config_object.optionxform = str
configfile = utils.get_config_path(MS_CONFIG, 'api')
config_object.read(configfile)
if not config_object.has_section('celery') or not os.path.isfile(configfile):
# Write default config
config_object.add_section('celery')
for key in DEFAULTCONF:
config_object.set('celery', key, str(DEFAULTCONF[key]))
conffile = codecs.open(configfile, 'w', 'utf-8')
config_object.write(conffile)
conffile.close()
config = utils.parse_config(config_object)
api_config = config.get('api')
worker_config = config.get('celery')
db_config = config.get('Database')
"Submitter Email",
"Submitter Organization",
"Submitter Phone",
],
'TAGS': [
"Malware",
"Benign"
]
}
app = Flask(__name__)
# Finagle Flask to read config from .ini file instead of .py file
web_config_object = configparser.SafeConfigParser()
web_config_object.optionxform = str
web_config_file = utils.get_config_path(MS_CONFIG, 'web')
web_config_object.read(web_config_file)
if not web_config_object.has_section('web') or not os.path.isfile(web_config_file):
# Write default config
web_config_object.add_section('web')
for key in DEFAULTCONF:
web_config_object.set('web', key, str(DEFAULTCONF[key]))
conffile = codecs.open(web_config_file, 'w', 'utf-8')
web_config_object.write(conffile)
conffile.close()
web_config = utils.parse_config(web_config_object)['web']
conf_tuple = namedtuple('WebConfig', web_config.keys())(*web_config.values())
app.config.from_object(conf_tuple)
@app.context_processor
'METADATA_FIELDS': [
"Submitter Name",
"Submission Description",
"Submitter Email",
"Submitter Organization",
"Submitter Phone",
],
'TAGS': ["Malware", "Benign"]
}
app = Flask(__name__)
# Finagle Flask to read config from .ini file instead of .py file
web_config_object = configparser.SafeConfigParser()
web_config_object.optionxform = str
web_config_file = utils.get_config_path(MS_CONFIG, 'web')
web_config_object.read(web_config_file)
if not web_config_object.has_section('web') or not os.path.isfile(
web_config_file):
# Write default config
web_config_object.add_section('web')
for key in DEFAULTCONF:
web_config_object.set('web', key, str(DEFAULTCONF[key]))
conffile = codecs.open(web_config_file, 'w', 'utf-8')
web_config_object.write(conffile)
conffile.close()
web_config = utils.parse_config(web_config_object)['web']
conf_tuple = namedtuple('WebConfig', web_config.keys())(*web_config.values())
app.config.from_object(conf_tuple)
def multiscanner_celery(file_,
original_filename,
task_id,
file_hash,
metadata,
config=MS_CONFIG,
module_list=None):
'''
Queue up multiscanner tasks
Usage:
from celery_worker import multiscanner_celery
multiscanner_celery.delay(full_path, original_filename, task_id,
hashed_filename, metadata, config, module_list)
'''
# Initialize the connection to the task DB
db.init_db()
logger.info('\n\n{}{}Got file: {}.\nOriginal filename: {}.\n'.format(
'=' * 48, '\n', file_hash, original_filename))
# Get the storage config
storage_conf = utils.get_config_path(config, 'storage')
storage_handler = storage.StorageHandler(configfile=storage_conf)
resultlist = multiscan([file_], configfile=config, module_list=module_list)
results = parse_reports(resultlist, python=True)
scan_time = datetime.now().isoformat()
# Get the Scan Config that the task was run with and
# add it to the task metadata
scan_config_object = configparser.SafeConfigParser()
scan_config_object.optionxform = str
scan_config_object.read(config)
full_conf = utils.parse_config(scan_config_object)
sub_conf = {}
# Count number of modules enabled out of total possible
# and add it to the Scan Metadata
total_enabled = 0
total_modules = len(full_conf.keys())
# Get the count of modules enabled from the module_list
# if it exists, else count via the config
if module_list:
total_enabled = len(module_list)
else:
for key in full_conf:
if key == 'main':
continue
sub_conf[key] = {}
sub_conf[key]['ENABLED'] = full_conf[key]['ENABLED']
if sub_conf[key]['ENABLED'] is True:
total_enabled += 1
results[file_]['Scan Metadata'] = metadata
results[file_]['Scan Metadata']['Worker Node'] = gethostname()
results[file_]['Scan Metadata']['Scan Config'] = sub_conf
results[file_]['Scan Metadata']['Modules Enabled'] = '{} / {}'.format(
total_enabled, total_modules)
results[file_]['Scan Metadata']['Scan Time'] = scan_time
results[file_]['Scan Metadata']['Task ID'] = task_id
# Use the original filename as the value for the filename
# in the report (instead of the tmp path assigned to the file
# by the REST API)
results[original_filename] = results[file_]
del results[file_]
# Save the reports to storage
storage_ids = storage_handler.store(results, wait=False)
storage_handler.close()
# Only need to raise ValueError here,
# Further cleanup will be handled by the on_failure method
# of MultiScannerTask
if not storage_ids:
raise ValueError('Report failed to index')
# Update the task DB to reflect that the task is done
db.update_task(
task_id=task_id,
task_status='Complete',
timestamp=scan_time,
)
logger.info('Completed Task #{}'.format(task_id))
return results
