def setUp(self):
self.hist0 = np.zeros((13, ))
self.A = 1.85e-10
self.n = 2.5
self.smodel = creep.PowerLawCreep(self.A, self.n)
self.cmodel = creep.J2CreepModel(self.smodel)
self.E = 150000.0
self.nu = 0.3
self.sY = 200.0
self.H = self.E / 50.0
self.elastic = elasticity.IsotropicLinearElasticModel(
self.E, "youngs", self.nu, "poissons")
self.surface = surfaces.IsoJ2()
self.iso = hardening.LinearIsotropicHardeningRule(self.sY, self.H)
self.flow = ri_flow.RateIndependentAssociativeFlow(
self.surface, self.iso)
self.pmodel = models.SmallStrainRateIndependentPlasticity(
self.elastic, self.flow)
self.model = models.SmallStrainCreepPlasticity(self.elastic,
self.pmodel,
self.cmodel)
self.efinal = np.array([0.1, -0.05, 0.02, -0.03, 0.1, -0.15])
self.tfinal = 10.0
self.T = 300.0
self.nsteps = 10
def setUp(self):
self.model1 = parse.parse_xml("test/examples.xml", "test_j2isocomb")
E = 150000.0
nu = 0.3
ys = 100.0
H = 100.0
r = 100.0
d = 1000.0
elastic = elasticity.IsotropicLinearElasticModel(
E, "youngs", nu, "poissons")
surface = surfaces.IsoJ2()
hrule1 = hardening.LinearIsotropicHardeningRule(ys, H)
hrule2 = hardening.VoceIsotropicHardeningRule(0.0, r, d)
hrule = hardening.CombinedIsotropicHardeningRule([hrule1, hrule2])
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
self.model2 = models.SmallStrainRateIndependentPlasticity(
elastic, flow)
self.T = 300.0
self.tmax = 10.0
self.nsteps = 100.0
self.emax = np.array([0.1, 0, 0, 0, 0, 0])
def simple_ex():
E = 92000.0
nu = 0.3
s0 = 180.0
Kp = 1000.0
H = 1000.0
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(s0, Kp)
kin = hardening.LinearKinematicHardeningRule(H)
hrule = hardening.CombinedHardeningRule(iso, kin)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
bmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
A = 0.0e-6
a = 2.2
model_off = damage.NEMLPowerLawDamagedModel_sd(elastic, A, a, bmodel)
A = 2e-5
model_on = damage.NEMLPowerLawDamagedModel_sd(elastic, A, a, bmodel)
res_off = drivers.uniaxial_test(model_off, 1.0e-2, emax=0.13)
res_on = drivers.uniaxial_test(model_on, 1.0e-2, emax=0.13)
plt.plot(res_off['strain'], res_off['stress'], 'k-')
plt.plot(res_on['strain'], res_on['stress'], 'r-')
plt.show()
def example4():
# T is in hours, strain in percent, stress in MPa
A = 1.85e-10
n = 2.5
m = 0.3
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
E = 150000.0
nu = 0.3
sY = 200.0
H = E / 25.0
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoJ2()
iso = hardening.LinearIsotropicHardeningRule(sY, H)
flow = ri_flow.RateIndependentAssociativeFlow(surface, iso)
pmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
model = models.SmallStrainCreepPlasticity(elastic, pmodel, cmodel)
res = drivers.creep(model, 205.0, 3600.0, 100.0, verbose = False,
nsteps_up = 500)
plt.plot(res['strain'], res['stress'])
plt.show()
def setUp(self):
self.model1 = parse.parse_xml("test/examples.xml",
"test_creep_plasticity")
A = 1.85e-10
n = 2.5
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
E = 150000.0
nu = 0.3
sY = 200.0
H = E / 50.0
elastic = elasticity.IsotropicLinearElasticModel(
E, "youngs", nu, "poissons")
surface = surfaces.IsoJ2()
iso = hardening.LinearIsotropicHardeningRule(sY, H)
flow = ri_flow.RateIndependentAssociativeFlow(surface, iso)
pmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
self.model2 = models.SmallStrainCreepPlasticity(
elastic, pmodel, cmodel)
self.T = 300.0
self.tmax = 10.0
self.nsteps = 100.0
self.emax = np.array([0.1, 0, 0, 0, 0, 0])
def setUp(self):
string_rep = '<test_j2iso type="SmallStrainRateIndependentPlasticity"><elastic type="IsotropicLinearElasticModel"><m1>103561.64383561644</m1><m1_type>youngs</m1_type><m2>0.2945205479452055</m2><m2_type>poissons</m2_type></elastic><flow type="RateIndependentAssociativeFlow"><surface type="IsoJ2"/><hardening type="LinearIsotropicHardeningRule"><s0>100.0</s0><K>1000.0</K></hardening></flow></test_j2iso>'
self.model1 = parse.parse_string(string_rep)
mu = 40000.0
K = 84000.0
ys = 100.0
H = 1000.0
elastic = elasticity.IsotropicLinearElasticModel(
mu, "shear", K, "bulk")
surface = surfaces.IsoJ2()
hrule = hardening.LinearIsotropicHardeningRule(ys, H)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
self.model2 = models.SmallStrainRateIndependentPlasticity(
elastic, flow)
self.T = 300.0
self.tmax = 10.0
self.nsteps = 100
self.emax = np.array([0.1, 0, 0, 0, 0, 0])
def setUp(self):
self.s0 = 200.0
self.K = 1000.0
self.n = 2
self.cs = list(np.array(range(self.n)) / (2 * self.n) + 10.0)
self.g0s = np.array(range(1, self.n + 1)) * 10.0
self.gss = 2.0 * self.g0s
self.betas = np.array(range(self.n)) / self.n
self.gammas = [
hardening.SatGamma(a, b, c)
for a, b, c in zip(self.g0s, self.gss, self.betas)
]
self.As = [0.0] * self.n
self.ns = [1.0] * self.n
self.iso = hardening.LinearIsotropicHardeningRule(self.s0, self.K)
self.model = hardening.Chaboche(self.iso, self.cs, self.gammas,
self.As, self.ns)
self.hist0 = np.zeros((1 + self.n * 6, ))
self.conform = 7
self.T = 300.0
def setUp(self):
s0 = 200.0
K = 1000.0
self.n = 2
cvals1 = [1000.0, 10.0]
cvals2 = [100.0, 100.0]
Ts = [0.0, 1000.0]
cs = [
interpolate.PiecewiseLinearInterpolate(Ts, [ci, cj])
for ci, cj in zip(cvals1, cvals2)
]
rs = [1.0e-2, 1.0]
gammas = [hardening.ConstantGamma(r) for r in rs]
self.As = [0.0] * self.n
self.ns = [1.0] * self.n
iso = hardening.LinearIsotropicHardeningRule(s0, K)
self.model = hardening.Chaboche(iso, cs, gammas, self.As, self.ns)
self.hist0 = np.zeros((1 + self.n * 6, ))
self.conform = 7
self.T = 300.0
def complete(self):
self.E = 92000.0
self.nu = 0.3
self.s0 = 180.0
self.Kp = 1000.0
self.H = 1000.0
self.elastic = elasticity.IsotropicLinearElasticModel(self.E, "youngs",
self.nu, "poissons")
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(self.s0, self.Kp)
kin = hardening.LinearKinematicHardeningRule(self.H)
hrule = hardening.CombinedHardeningRule(iso, kin)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
self.bmodel = models.SmallStrainRateIndependentPlasticity(self.elastic,
flow)
self.xi = 0.478
self.phi = 1.914
self.A = 10000000.0
self.model = damage.ModularCreepDamageModel_sd(
self.elastic,
self.A, self.xi, self.phi,
self.effective_model(),
self.bmodel)
self.stress = np.array([100,-50.0,300.0,-99,50.0,125.0])
self.T = 100.0
self.s_np1 = self.stress
self.s_n = np.array([-25,150,250,-25,-100,25])
self.d_np1 = 0.5
self.d_n = 0.4
self.e_np1 = np.array([0.1,-0.01,0.15,-0.05,-0.1,0.15])
self.e_n = np.array([-0.05,0.025,-0.1,0.2,0.11,0.13])
self.T_np1 = self.T
self.T_n = 90.0
self.t_np1 = 1.0
self.t_n = 0.0
self.u_n = 0.0
self.p_n = 0.0
# This is a rather boring baseline history state to probe, but I can't
# think of a better way to get a "generic" history from a generic model
self.hist_n = np.array([self.d_n] + list(self.bmodel.init_store()))
self.x_trial = np.array([50,-25,150,-150,190,100.0] + [0.41])
self.nsteps = 10
self.etarget = np.array([0.1,-0.025,0.02,0.015,-0.02,-0.05])
self.ttarget = 10.0
def setUp(self):
self.model1 = parse.parse_xml("test/examples.xml", "test_powerdamage")
E = 92000.0
nu = 0.3
s0 = 180.0
Kp = 1000.0
elastic = elasticity.IsotropicLinearElasticModel(
E, "youngs", nu, "poissons")
surface = surfaces.IsoJ2()
hrule = hardening.LinearIsotropicHardeningRule(s0, Kp)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
bmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
a = 2.2
A = 2e-5
self.model2 = damage.NEMLPowerLawDamagedModel_sd(elastic, A, a, bmodel)
self.T = 300.0
self.tmax = 10.0
self.nsteps = 100.0
self.emax = np.array([0.05, 0, 0, 0, 0, 0])
def setUp(self):
self.E = 92000.0
self.nu = 0.3
self.s0 = 180.0
self.Kp = 1000.0
self.H = 1000.0
self.elastic = elasticity.IsotropicLinearElasticModel(self.E, "youngs",
self.nu, "poissons")
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(self.s0, self.Kp)
kin = hardening.LinearKinematicHardeningRule(self.H)
hrule = hardening.CombinedHardeningRule(iso, kin)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
self.bmodel = models.SmallStrainRateIndependentPlasticity(self.elastic,
flow)
self.fn = interpolate.PolynomialInterpolate([-6.653e-9,2.952e-4,-6.197e-1])
self.C = 32.06
self.lmr = larsonmiller.LarsonMillerRelation(self.fn, self.C)
self.effective = damage.VonMisesEffectiveStress()
self.model = damage.LarsonMillerCreepDamageModel_sd(
self.elastic, self.lmr, self.effective, self.bmodel)
self.stress = np.array([100,-50.0,300.0,-99,50.0,125.0])
self.T = 100.0
self.s_np1 = self.stress
self.s_n = np.array([-25,150,250,-25,-100,25])
self.d_np1 = 0.5
self.d_n = 0.4
self.e_np1 = np.array([0.1,-0.01,0.15,-0.05,-0.1,0.15])
self.e_n = np.array([-0.05,0.025,-0.1,0.2,0.11,0.13])
self.T_np1 = self.T
self.T_n = 90.0
self.t_np1 = 1.0
self.t_n = 0.0
self.dt = self.t_np1 - self.t_n
self.u_n = 0.0
self.p_n = 0.0
# This is a rather boring baseline history state to probe, but I can't
# think of a better way to get a "generic" history from a generic model
self.hist_n = np.array([self.d_n] + list(self.bmodel.init_store()))
self.x_trial = np.array([50,-25,150,-150,190,100.0] + [0.41])
self.nsteps = 10
self.etarget = np.array([0.1,-0.025,0.02,0.015,-0.02,-0.05])
self.ttarget = 10.0
def setUp(self):
self.hist0 = np.zeros((7, ))
self.E = 92000.0
self.nu = 0.3
self.mu = self.E / (2 * (1 + self.nu))
self.K = self.E / (3 * (1 - 2 * self.nu))
self.s0 = 180.0
self.Kp = self.E / 100
self.elastic = elasticity.IsotropicLinearElasticModel(
self.mu, "shear", self.K, "bulk")
surface = surfaces.IsoJ2()
hrule = hardening.LinearIsotropicHardeningRule(self.s0, self.Kp)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
self.model = models.SmallStrainRateIndependentPlasticity(
self.elastic, flow, check_kt=False)
self.efinal = np.array([0.1, -0.05, 0.02, -0.03, 0.1, -0.15])
self.tfinal = 10.0
self.T = 300.0
self.nsteps = 10
def setUp(self):
E = 200000.0
nu = 0.27
mu = E / (2 * (1.0 + nu))
K = E / (3 * (1 - 2 * nu))
s0 = 300.0
Kp = 0.0
c = [30000.0]
r = [60.0]
A = [0.0]
n = [1.0]
elastic = elasticity.IsotropicLinearElasticModel(
mu, "shear", K, "bulk")
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(s0, Kp)
gmodels = [hardening.ConstantGamma(g) for g in r]
hrule = hardening.Chaboche(iso, c, gmodels, A, n)
flow = ri_flow.RateIndependentNonAssociativeHardening(surface, hrule)
self.model = models.SmallStrainRateIndependentPlasticity(
elastic, flow, verbose=False, check_kt=False)
self.umodel = uniaxial.UniaxialModel(self.model)
self.de = 0.001
self.dt = 1.0
self.dT = 0.0
self.T0 = 0.0
self.nsteps = 100
def setUp(self):
self.E = 100000.0
self.nu = 0.29
self.sY = 100.0
self.H = 1200.0
elastic = elasticity.IsotropicLinearElasticModel(
self.E, "youngs", self.nu, "poissons")
surf = surfaces.IsoJ2()
hard = hardening.LinearIsotropicHardeningRule(self.sY, self.H)
flow = ri_flow.RateIndependentAssociativeFlow(surf, hard)
self.model = models.SmallStrainRateIndependentPlasticity(elastic, flow)
self.conditions = [{
'hist_n':
self.model.init_store(),
'stress_n':
np.zeros((6, )),
'd_n':
np.zeros((6, )),
'd_np1':
np.array([0.1, 0.05, -0.025, 0.15, 0.2, -0.05]),
'w_n':
np.zeros((3, )),
'w_np1':
np.array([-0.15, 0.1, 0.05]),
'dt':
1.0,
'T':
300.0
}, {
'hist_n':
self.model.init_store(),
'stress_n':
np.array([10.0, -5.0, 30.0, -5.0, 10.0, 15.0]),
'd_n':
np.zeros((6, )),
'd_np1':
np.array([0.05, 0.5, 0.25, 0.20, -0.2, 0.25]),
'w_n':
np.zeros((3, )),
'w_np1':
np.array([-0.15, 0.25, 0.05]),
'dt':
1.0,
'T':
300.0
}]
self.directions = [{
'd': np.array([0.1, -0.15, 0.2, -0.05, 0.15, 0.25]),
'w': np.array([0.25, -0.15, 0.1])
}]
self.nsteps = 10
self.dt = 1.0
self.T = 300.0
def setUp(self):
self.s0 = 200.0
self.K = 1000.0
self.hist0 = np.array([0.0])
self.hist_trial = np.array([0.1])
self.T = 300.0
self.model = hardening.LinearIsotropicHardeningRule(self.s0, self.K)
def setUp(self):
self.s0 = 200.0
self.K = 15000.0
self.surface = surfaces.IsoJ2()
self.hardening = hardening.LinearIsotropicHardeningRule(self.s0, self.K)
self.model = ri_flow.RateIndependentAssociativeFlow(self.surface, self.hardening)
self.hist0 = np.zeros((1,))
self.T = 300.0
def unload_ex():
E = 92000.0
nu = 0.3
s0 = 180.0
Kp = 1000.0
H = 1000.0
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(s0, Kp)
kin = hardening.LinearKinematicHardeningRule(H)
hrule = hardening.CombinedHardeningRule(iso, kin)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
bmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
A = 2e-5
a = 2.2
model = damage.NEMLPowerLawDamagedModel_sd(elastic, A, a, bmodel)
driver = drivers.Driver_sd(model)
nsteps = 25
sdir = np.array([1, 0, 0, 0, 0, 0])
erate = 1.0e-5
e_inc = 0.1 / nsteps
for i in range(nsteps):
einc, ainc = driver.erate_einc_step(sdir, erate, e_inc, 0.0)
estrain = model.elastic_strains(driver.stress_int[-1], driver.T_int[-1],
driver.stored[-1])
print("Calculated elastic strain: %f" % estrain[0])
nsteps = 20
dt = 0.1
rstress = driver.stress_int[-1]
rstrain = driver.strain_int[-1][0]
for m in np.linspace(0, 1.0, nsteps, endpoint=False)[::-1]:
driver.stress_step(rstress * m, driver.t_int[-1] + dt,
driver.T_int[-1])
fstrain = driver.strain_int[-1][0]
print("Actual elastic strain: %f" % (rstrain - fstrain))
print("Calculated final elastic strain: %f" % model.elastic_strains(
driver.stress_int[-1], driver.T_int[-1], driver.stored[-1])[0])
plt.plot(driver.strain[:, 0], driver.stress[:, 0])
plt.show()
def test_ri_plasticity(self):
surface = surfaces.IsoJ2()
sy = 100.0
K = 1000.0
H = 500.0
hrule = hardening.CombinedHardeningRule(
hardening.LinearIsotropicHardeningRule(sy, K),
hardening.LinearKinematicHardeningRule(H))
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
model = models.SmallStrainRateIndependentPlasticity(
self.elastic1, flow)
self.are_equal(self.elastic1, model.elastic)
model.set_elastic_model(self.elastic2)
self.are_equal(self.elastic2, model.elastic)
def setUp(self):
self.s0 = 200.0
self.K = 1000.0
self.H = 1000.0
self.hist0 = np.zeros((7, ))
self.hist_trial = np.array([50.0, 75.0, 100.0, 25.0, 10.0, 15.0, 60.0])
self.hist_trial[1:] = make_dev(self.hist_trial[1:])
self.T = 300.0
self.iso = hardening.LinearIsotropicHardeningRule(self.s0, self.K)
self.kin = hardening.LinearKinematicHardeningRule(self.H)
self.model = hardening.CombinedHardeningRule(self.iso, self.kin)
def creep_ex():
E = 92000.0
nu = 0.3
s0 = 120.0
A = 1.0e-10
n = 3.0
Kp = E / 500
H = E / 500
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(s0, Kp)
kin = hardening.LinearKinematicHardeningRule(H)
hrule = hardening.CombinedHardeningRule(iso, kin)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
pmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
bmodel = models.SmallStrainCreepPlasticity(elastic, pmodel, cmodel)
A_damg = 1.0e-2
a_damg = 1.0
model = damage.NEMLPowerLawDamagedModel_sd(elastic,
A_damg,
a_damg,
bmodel,
verbose=False)
#res = drivers.uniaxial_test(model, 1.0e-2, emax = 0.25)
#plt.plot(res['strain'], res['stress'])
#plt.show()
res = drivers.creep(model, 120.0, 1.0, 393.0, verbose=False)
plt.plot(res['rtime'], res['rstrain'])
plt.show()
plt.loglog(res['rtime'], res['rrate'])
plt.show()
def setUp(self):
self.s0 = 100.0
self.Kp = 1500.0
self.n = 2.0
self.eta = 100.0
self.surface = surfaces.IsoJ2()
self.hrule = hardening.LinearIsotropicHardeningRule(self.s0, self.Kp)
self.g = visco_flow.GPowerLaw(self.n, self.eta)
self.model = visco_flow.PerzynaFlowRule(self.surface, self.hrule,
self.g)
self.hist0 = np.zeros((1, ))
self.T = 300.0
def setUp(self):
E = 150000.0
nu = 0.3
ys = 100.0
H = 1000.0
elastic = elasticity.IsotropicLinearElasticModel(
E, "youngs", nu, "poissons")
surface = surfaces.IsoJ2()
hrule = hardening.LinearIsotropicHardeningRule(ys, H)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
self.model = models.SmallStrainRateIndependentPlasticity(elastic, flow)
self.nblock = 100
def setUp(self):
self.s0 = 200.0
self.K = 1000.0
self.hist0 = np.array([0.0])
self.hist_trial = np.array([0.1])
self.T = 300.0
self.model1 = hardening.LinearIsotropicHardeningRule(self.s0, self.K)
self.s0 = 200.0
self.R = 100.0
self.d = 10.0
self.model2 = hardening.VoceIsotropicHardeningRule(self.s0, self.R, self.d)
self.model = hardening.CombinedIsotropicHardeningRule([self.model1, self.model2])
def setUp(self):
self.s0 = 200.0
self.K = 1000.0
self.n = 4
self.cs = list(np.array(range(self.n)) / (1 + self.n))
self.rs = np.array(range(self.n)) * 10.0
self.gammas = [hardening.ConstantGamma(r) for r in self.rs]
self.As = [0.0] * self.n
self.ns = [1.0] * self.n
self.iso = hardening.LinearIsotropicHardeningRule(self.s0, self.K)
self.model = hardening.Chaboche(self.iso, self.cs, self.gammas,
self.As, self.ns)
self.hist0 = np.zeros((1 + self.n * 6, ))
self.conform = 7
self.T = 300.0
def setUp(self):
self.s0 = 200.0
self.K = 15000.0
self.n = 4
self.cs = range(1,self.n+1)
self.rs = range(1, self.n+1)
self.iso = hardening.LinearIsotropicHardeningRule(self.s0, self.K)
self.gmodels = [hardening.ConstantGamma(g) for g in self.rs]
As = [0.0] * self.n
ns = [1.0] * self.n
self.hardening = hardening.Chaboche(self.iso, self.cs, self.gmodels, As,
ns)
self.surface = surfaces.IsoKinJ2()
self.model = ri_flow.RateIndependentNonAssociativeHardening(self.surface, self.hardening)
self.hist0 = np.zeros((1+6*self.n,))
self.T = 300.0
def example3():
# T is in hours, strain in percent, stress in MPa
A = 1.85e-10
n = 2.5
smodel = creep.PowerLawCreep(A, n)
cmodel = creep.J2CreepModel(smodel)
E = 150000.0
nu = 0.3
sY = 200.0
H = E / 50.0
elastic = elasticity.IsotropicLinearElasticModel(E, "youngs", nu,
"poissons")
surface = surfaces.IsoJ2()
iso = hardening.LinearIsotropicHardeningRule(sY, H)
flow = ri_flow.RateIndependentAssociativeFlow(surface, iso)
pmodel = models.SmallStrainRateIndependentPlasticity(elastic, flow)
smax = 250.0
R = -0.5
srate = 1.0 * 3600.0
ncycles = 25
hold = 25
res1 = drivers.stress_cyclic(pmodel, smax, R, srate, ncycles,
hold_time = [0,hold])
model = models.SmallStrainCreepPlasticity(elastic, pmodel, cmodel, verbose = False)
res2 = drivers.stress_cyclic(model, smax, R, srate, ncycles,
hold_time = [0,hold], verbose = False)
plt.plot(res1['strain'], res1['stress'], 'k-')
plt.plot(res2['strain'], res2['stress'], 'r-')
plt.show()
def setUp(self):
self.model1 = parse.parse_xml("test/examples.xml", "test_j2iso")
mu = 40000.0
K = 84000.0
ys = 100.0
H = 1000.0
elastic = elasticity.IsotropicLinearElasticModel(
mu, "shear", K, "bulk")
surface = surfaces.IsoJ2()
hrule = hardening.LinearIsotropicHardeningRule(ys, H)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
self.model2 = models.SmallStrainRateIndependentPlasticity(
elastic, flow)
self.T = 300.0
self.tmax = 10.0
self.nsteps = 100.0
self.emax = np.array([0.1, 0, 0, 0, 0, 0])
def test_damage(self):
s0 = 180.0
Kp = 1000.0
H = 1000.0
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(s0, Kp)
kin = hardening.LinearKinematicHardeningRule(H)
hrule = hardening.CombinedHardeningRule(iso, kin)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
bmodel = models.SmallStrainRateIndependentPlasticity(
self.elastic1, flow)
W0 = 10.0
k0 = 0.0001
a0 = 2.0
model1 = damage.NEMLExponentialWorkDamagedModel_sd(
self.elastic1, W0, k0, a0, bmodel)
W02 = 10.0
k02 = 0.001
a02 = 1.5
model2 = damage.NEMLExponentialWorkDamagedModel_sd(
self.elastic1, W02, k02, a02, bmodel)
model = damage.CombinedDamageModel_sd(self.elastic1, [model1, model2],
bmodel)
self.very_close(model, self.emodel1)
model.set_elastic_model(self.elastic2)
self.very_close(model, self.emodel2)
def setUp(self):
self.hist0 = np.zeros((13, ))
self.E = 92000.0
self.nu = 0.3
self.mu = self.E / (2 * (1 + self.nu))
self.K = self.E / (3 * (1 - 2 * self.nu))
self.s0 = 180.0
self.Kp = 1000.0
self.n = 2
self.cs = [10.0, 2.0]
self.rs = [5.0, 1.0]
self.gmodels = [hardening.ConstantGamma(g) for g in self.rs]
self.As = [0.0] * self.n
self.ns = [1.0] * self.n
self.elastic = elasticity.IsotropicLinearElasticModel(
self.mu, "shear", self.K, "bulk")
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(self.s0, self.Kp)
hmodel = hardening.Chaboche(iso, self.cs, self.gmodels, self.As,
self.ns)
flow = ri_flow.RateIndependentNonAssociativeHardening(surface, hmodel)
self.model = models.SmallStrainRateIndependentPlasticity(
self.elastic, flow, check_kt=False)
self.efinal = np.array([0.1, -0.05, 0.02, -0.03, 0.1, -0.15])
self.tfinal = 10.0
self.T = 300.0
self.nsteps = 30
def setUp(self):
self.E = 92000.0
self.nu = 0.3
self.s0 = 180.0
self.Kp = 1000.0
self.H = 1000.0
self.elastic = elasticity.IsotropicLinearElasticModel(self.E, "youngs",
self.nu, "poissons")
surface = surfaces.IsoKinJ2()
iso = hardening.LinearIsotropicHardeningRule(self.s0, self.Kp)
kin = hardening.LinearKinematicHardeningRule(self.H)
hrule = hardening.CombinedHardeningRule(iso, kin)
flow = ri_flow.RateIndependentAssociativeFlow(surface, hrule)
self.bmodel = models.SmallStrainRateIndependentPlasticity(self.elastic,
flow)
self.fn = interpolate.PolynomialInterpolate([0.1,5.0, 1e-8])
self.n = 2.1
self.model = damage.NEMLWorkDamagedModel_sd(
self.elastic, self.fn, self.n, self.bmodel, verbose = False)
self.stress = np.array([100,-50.0,300.0,-99,50.0,125.0]) * 0.75
self.T = 100.0
self.s_np1 = self.stress
self.s_n = np.array([-25,150,250,-25,-100,25]) * 0.0
self.d_np1 = 0.2
self.d_n = 0.1
self.e_np1 = np.array([0.1,-0.01,0.15,-0.05,-0.1,0.15]) * 0.75
self.e_n = np.array([-0.05,0.025,-0.1,0.2,0.11,0.13]) * 0.0
self.T_np1 = self.T
self.T_n = 90.0
self.t_np1 = 5000.0
self.t_n = 0.9
self.u_n = 0.0
self.p_n = 0.0
# This is a rather boring baseline history state to probe, but I can't
# think of a better way to get a "generic" history from a generic model
self.hist_n = np.array([self.d_n] + list(self.bmodel.init_store()))
self.x_trial = np.array([50,-25,150,-150,190,100.0] + [0.41])
self.nsteps = 10
self.etarget = np.array([0.1,-0.025,0.02,0.015,-0.02,-0.05])
self.ttarget = 2.0
self.ee = np.dot(self.elastic.S(self.T_np1), self.s_np1*(1.0-self.d_np1) - self.s_n*(1.0-self.d_n))
self.de = self.e_np1 - self.e_n
self.dp = self.de - self.ee
self.dt = self.t_np1 - self.t_n
self.Wdot = np.dot(self.s_np1*(1.0-self.d_np1), self.dp) / self.dt
