def test_epoch_decorators(self, clean_up):
data_source = RealFunctionDataLayer(n=24, batch_size=12)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = trainable_module(x=x)
loss_tensor = loss(predictions=y_pred, target=y)
epoch_start_counter = [0]
epoch_end_counter = [0]
@on_epoch_start
def count_epoch_starts(state, counter=epoch_start_counter):
counter[0] += 1
@on_epoch_end
def count_epoch_ends(state, counter=epoch_end_counter):
counter[0] -= 1
callbacks = [count_epoch_starts, count_epoch_ends]
self.nf.train(
tensors_to_optimize=[loss_tensor],
callbacks=callbacks,
optimization_params={
"max_steps": 4,
"lr": 0.01
},
optimizer="sgd",
)
assert epoch_start_counter[0] == 2
assert epoch_end_counter[0] == -2
def test_nm_tensors_producer_args(self):
"""
Tests whether nmTensors are correct - producers and their args.
"""
# Create modules.
data_source = RealFunctionDataLayer(n=100, batch_size=1)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = trainable_module(x=x)
loss_tensor = loss(predictions=y_pred, target=y)
# check producers' bookkeeping
assert loss_tensor.producer_name == loss.name
assert loss_tensor.producer_args == {
"predictions": y_pred,
"target": y
}
assert y_pred.producer_name == trainable_module.name
assert y_pred.producer_args == {"x": x}
assert y.producer_name == data_source.name
assert y.producer_args == {}
assert x.producer_name == data_source.name
assert x.producer_args == {}
def wrong():
data_source = RealFunctionDataLayer(n=10000, batch_size=128)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
x, y = data_source()
loss_tensor = loss(predictions=x, target=x)
_ = trainable_module(x=loss_tensor)
def test_graph_serialization_7_arbitrary_graph_with_loops(self):
"""
Tests whether serialization works in the case when we serialize a graph after a different graph
was nested in it, with additionally bound input and output binding works (manual port names).
"""
# Instantiate the necessary neural modules.
dl = RealFunctionDataLayer(n=100, batch_size=1, name="dl")
tn = TaylorNet(dim=4, name="tn")
loss = MSELoss(name="loss")
# Build a graph with a loop.
with NeuralGraph(name="graph") as graph:
# Add modules to graph.
x, t = dl()
# First call to TN.
p1 = tn(x=x)
# Second call to TN.
p2 = tn(x=p1)
# Take output of second, pass it to loss.
lss = loss(predictions=p2, target=t)
# Make sure all connections are there!
assert len(graph.tensor_list) == 5
# 4 would mean that we have overwritten the "p1" (tn->y_pred) tensor!
# Serialize the graph.
serialized_graph = graph.serialize()
# Create the second graph - deserialize with "module reusing".
graph2 = NeuralGraph.deserialize(serialized_graph,
reuse_existing_modules=True)
serialized_graph2 = graph2.serialize()
# Must be the same.
assert serialized_graph == serialized_graph2
def test_graph_serialization_2_simple_graph_output_binding(self):
"""
Tests whether serialization of a simple graph with output binding works.
"""
# Instantiate the necessary neural modules.
dl = RealFunctionDataLayer(n=100, batch_size=1, name="tgs2_dl")
tn = TaylorNet(dim=4, name="tgs2_tn")
loss = MSELoss(name="tgs2_loss")
# Create the graph.
with NeuralGraph(operation_mode=OperationMode.evaluation) as g1:
x, t = dl()
prediction1 = tn(x=x)
_ = loss(predictions=prediction1, target=t)
# Manually bind the selected outputs.
g1.outputs["ix"] = x
g1.outputs["te"] = t
g1.outputs["prediction"] = prediction1
# Serialize graph
serialized_g1 = g1.serialize()
# Create the second graph - deserialize with reusing.
g2 = NeuralGraph.deserialize(serialized_g1,
reuse_existing_modules=True)
serialized_g2 = g2.serialize()
# Must be the same.
assert serialized_g1 == serialized_g2
def test_graph_simple_import_export(self, tmpdir):
"""
Tests whether the Neural Module can instantiate a simple module by loading a configuration file.
Args:
tmpdir: Fixture which will provide a temporary directory.
"""
# Instantiate the necessary neural modules.
dl = RealFunctionDataLayer(n=100, batch_size=1, name="tgio1_dl")
tn = TaylorNet(dim=4, name="tgio1_tn")
loss = MSELoss(name="tgio1_loss")
# Create the graph.
with NeuralGraph(operation_mode=OperationMode.training) as g1:
x, t = dl()
p = tn(x=x)
_ = loss(predictions=p, target=t)
# Serialize graph
serialized_g1 = g1.serialize()
# Generate filename in the temporary directory.
tmp_file_name = str(tmpdir.mkdir("export").join("simple_graph.yml"))
# Export graph to file.
g1.export_to_config(tmp_file_name)
# Create the second graph - import!
g2 = NeuralGraph.import_from_config(tmp_file_name,
reuse_existing_modules=True)
serialized_g2 = g2.serialize()
# Must be the same.
assert serialized_g1 == serialized_g2
def test_SimpleLogger(self, clean_up):
data_source = RealFunctionDataLayer(n=100, batch_size=1)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = trainable_module(x=x)
loss_tensor = loss(predictions=y_pred, target=y)
# Mock up both std and stderr streams.
with logging.patch_stdout_handler(StringIO()) as std_out:
self.nf.train(
tensors_to_optimize=[loss_tensor],
callbacks=[SimpleLogger(step_freq=1)],
optimization_params={
"max_steps": 4,
"lr": 0.01
},
optimizer="sgd",
)
output_lines = std_out.getvalue().splitlines()
assert len(output_lines) == 4
for line in output_lines:
assert "loss" in line
def test_explicit_graph_with_activation(self):
"""
Tests initialization of an `explicit` graph and decoupling of graph creation from its activation.
Also tests modules access.
"""
# Create modules.
dl = RealFunctionDataLayer(n=10, batch_size=1, name="dl")
fx = TaylorNet(dim=4, name="fx")
loss = MSELoss(name="loss")
# Create the g0 graph.
g0 = NeuralGraph()
# Activate the "g0 graph context" - all operations will be recorded to g0.
with g0:
x, t = dl()
p = fx(x=x)
lss = loss(predictions=p, target=t)
# Assert that there are 3 modules in the graph.
assert len(g0) == 3
# Test access modules.
assert g0["dl"] is dl
assert g0["fx"] is fx
assert g0["loss"] is loss
with pytest.raises(KeyError):
g0["other_module"]
def test_nm_tensors_producer_consumers(self):
"""
Tests whether nmTensors are correct - checking producers and consumers.
"""
# Create modules.
data_source = RealFunctionDataLayer(n=10, batch_size=1, name="source")
trainable_module = TaylorNet(dim=4, name="tm")
loss = MSELoss(name="loss")
loss2 = MSELoss(name="loss2")
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = trainable_module(x=x)
lss = loss(predictions=y_pred, target=y)
lss2 = loss2(predictions=y_pred, target=y)
# Check tensor x producer and consumers.
p = x.producer_step_module_port
cs = x.consumers
assert p.module_name == "source"
assert p.port_name == "x"
assert len(cs) == 1
assert cs[0].module_name == "tm"
assert cs[0].port_name == "x"
# Check tensor y producer and consumers.
p = y.producer_step_module_port
cs = y.consumers
assert p.module_name == "source"
assert p.port_name == "y"
assert len(cs) == 2
assert cs[0].module_name == "loss"
assert cs[0].port_name == "target"
assert cs[1].module_name == "loss2"
assert cs[1].port_name == "target"
# Check tensor y_pred producer and consumers.
p = y_pred.producer_step_module_port
cs = y_pred.consumers
assert p.module_name == "tm"
assert p.port_name == "y_pred"
assert len(cs) == 2
assert cs[0].module_name == "loss"
assert cs[0].port_name == "predictions"
assert cs[1].module_name == "loss2"
assert cs[1].port_name == "predictions"
def test_graph_serialization_6_graph_after_nesting_with_manual_binding(
self):
"""
Tests whether serialization works in the case when we serialize a graph after a different graph
was nested in it, with additionally bound input and output binding works (manual port names).
"""
# Instantiate the necessary neural modules.
dl = RealFunctionDataLayer(n=100, batch_size=1, name="tgs6_dl")
tn = TaylorNet(dim=4, name="tgs6_tn")
loss = MSELoss(name="tgs6_loss")
# Create "model".
with NeuralGraph(operation_mode=OperationMode.both,
name="tgs6_model") as model:
# Manually bind input port: "input" -> "x"
model.inputs["input"] = tn.input_ports["x"]
# Add module to graph and bind it input port 'x'.
y = tn(x=model.inputs["input"])
# Manual output bind.
model.outputs["output"] = y
# Serialize "model".
serialized_model = model.serialize()
# Delete model-related stuff.
del model
del tn
# Deserialize the "model copy".
model_copy = NeuralGraph.deserialize(serialized_model,
name="tgs6_model_copy")
# Build the "training graph" - using the model copy.
with NeuralGraph(operation_mode=OperationMode.training,
name="tgs6_training") as training:
# Add modules to graph.
x, t = dl()
# Incorporate modules from the existing "model" graph.
p = model_copy(
input=x
) # Note: this output should actually be named "output", not "y_pred"!
lss = loss(predictions=p, target=t)
# Serialize the "training graph".
serialized_training = training.serialize()
# Delete everything.
del dl
del loss
del model_copy
del training
# Create the second graph - deserialize without "module reusing".
training2 = NeuralGraph.deserialize(serialized_training)
serialized_training2 = training2.serialize()
# Must be the same.
assert serialized_training == serialized_training2
def test_graph_outputs_binding1(self):
# Create modules.
data_source = RealFunctionDataLayer(n=100, batch_size=1)
tn = TaylorNet(dim=4)
loss = MSELoss()
with NeuralGraph() as g:
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = tn(x=x)
lss = loss(predictions=y_pred, target=y)
# Test default binding.
bound_outputs = GraphOutputs(g.tensors)
bound_outputs.bind([x, y])
bound_outputs.bind([y_pred])
bound_outputs.bind([lss])
# Delete not allowed.
with pytest.raises(TypeError):
del bound_outputs["loss"]
assert len(bound_outputs) == 4
assert len(bound_outputs.tensors) == 4
assert len(bound_outputs.tensor_list) == 4
defs = bound_outputs.definitions
assert defs["x"].compare(
data_source.output_ports["x"]) == NeuralTypeComparisonResult.SAME
assert defs["y"].compare(
data_source.output_ports["y"]) == NeuralTypeComparisonResult.SAME
assert defs["y_pred"].compare(
tn.output_ports["y_pred"]) == NeuralTypeComparisonResult.SAME
assert defs["loss"].compare(
loss.output_ports["loss"]) == NeuralTypeComparisonResult.SAME
with pytest.raises(KeyError):
_ = defs["lss"]
# Bound manually.
bound_outputs["my_prediction"] = y_pred
bound_outputs["my_loss"] = lss
# Delete not allowed.
with pytest.raises(TypeError):
del bound_outputs["my_prediction"]
assert len(bound_outputs) == 2
defs = bound_outputs.definitions
assert defs["my_prediction"].compare(
tn.output_ports["y_pred"]) == NeuralTypeComparisonResult.SAME
assert defs["my_loss"].compare(
loss.output_ports["loss"]) == NeuralTypeComparisonResult.SAME
with pytest.raises(KeyError):
_ = defs["x"]
def test_step_batch_decorators(self, clean_up):
"""Showcase the difference between step and batch"""
data_source = RealFunctionDataLayer(n=24, batch_size=12)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = trainable_module(x=x)
loss_tensor = loss(predictions=y_pred, target=y)
epoch_step_counter = [0]
epoch_batch_counter = [0]
@on_step_end
def count_steps(state, counter=epoch_step_counter):
counter[0] += 1
@on_batch_end
def count_batches(state, counter=epoch_batch_counter):
counter[0] += 1
callbacks = [count_steps, count_batches]
self.nf.train(
tensors_to_optimize=[loss_tensor],
callbacks=callbacks,
optimization_params={
"max_steps": 4,
"lr": 0.01
},
optimizer="sgd",
)
# when grad accumlation steps (aka iter_per_step or batches_per_step) = 1, num_steps == num_batches
assert epoch_step_counter[0] == 4
assert epoch_batch_counter[0] == 4
epoch_step_counter[0] = 0
epoch_batch_counter[0] = 0
self.nf.train(
tensors_to_optimize=[loss_tensor],
callbacks=callbacks,
optimization_params={
"max_steps": 4,
"lr": 0.01
},
optimizer="sgd",
reset=True,
batches_per_step=2,
)
# when grad accumlation steps != 1, num_steps != num_batches
assert epoch_step_counter[0] == 4
assert epoch_batch_counter[0] == 8
def test_graph_nesting8_topology_copy_two_modules(self):
"""
Test whether when nesting of one graph into another will result in copy of the graph topology (tensors).
Case: manual binding of inputs and outputs in the inner graph.
"""
ds = RealFunctionDataLayer(n=10, batch_size=1, name="tgn8_ds")
tn = TaylorNet(dim=4, name="tgn8_tn")
loss = MSELoss(name="tgn8_loss")
# Create the "inner graph".
with NeuralGraph(operation_mode=OperationMode.training,
name="tgn8_g1") as g1:
# Create input port definitions.
g1.inputs["inner_x"] = tn.input_ports["x"]
g1.inputs["inner_target"] = loss.input_ports["target"]
# Connect modules and bound inputs.
y_pred1 = tn(x=g1.inputs["inner_x"])
lss1 = loss(predictions=y_pred1, target=g1.inputs["inner_target"])
# Manually bind the output ports.
g1.outputs["inner_y_pred"] = y_pred1
g1.outputs["inner_loss"] = lss1
# Create the "outer graph".
with NeuralGraph(operation_mode=OperationMode.training,
name="tgn8_g2") as g2:
x, y = ds()
# Nest the inner graph.
y_pred2, lss2 = g1(inner_x=x, inner_target=y)
# Manually bind the output ports.
g2.outputs["outer_y_pred"] = y_pred2
g2.outputs["outer_loss"] = lss2
# Check modules and steps.
assert len(g2.steps) == 3
assert len(g2) == 3
# Check the output tensors.
assert len(g2.output_tensors) == 2
assert g2.output_tensors["outer_y_pred"] == y_pred2
assert g2.output_tensors["outer_loss"] == lss2
# Check the "internal tensors".
assert y_pred2 is not y_pred1
assert lss2 is not lss1
assert g2.tensors[0]["x"] == x
assert g2.tensors[0]["y"] == y
# Internally the name "y_pred" is used, not the "bound output name": "inner_y_pred"!
assert g2.tensors[1]["y_pred"] == y_pred2
# Analogically with "loss".
assert g2.tensors[2]["loss"] == lss2
def test_graph_nesting9_topology_copy_whole_graph(self):
"""
Test whether when nesting of one graph into another will result in copy of the graph topology (tensors).
Case: manual binding of inputs and outputs in the inner graph. Manual binding of outer graph outputs.
"""
ds = RealFunctionDataLayer(n=10, batch_size=1, name="tgn9_ds")
tn = TaylorNet(dim=4, name="tgn9_tn")
loss = MSELoss(name="tgn9_loss")
# Create the "inner graph".
with NeuralGraph(operation_mode=OperationMode.training,
name="tgn9_g1") as g1:
# Connect modules.
x, y = ds()
y_pred1 = tn(x=x)
lss1 = loss(predictions=y_pred1, target=y)
# Manually bind the output ports.
g1.outputs["inner_y_pred"] = y_pred1
g1.outputs["inner_loss"] = lss1
# Create the "outer graph".
with NeuralGraph(operation_mode=OperationMode.training,
name="tgn9_g2") as g2:
y_pred2, lss2 = g1()
# Manually bind the output ports.
g2.outputs["outer_y_pred"] = y_pred2
g2.outputs["outer_loss"] = lss2
# Check modules and steps.
assert len(g2.steps) == 3
assert len(g2) == 3
# Check the output tensors.
assert len(g2.output_tensors) == 2
assert g2.output_tensors["outer_y_pred"] == y_pred2
assert g2.output_tensors["outer_loss"] == lss2
# Check the "internal tensors".
assert y_pred2 is not y_pred1
assert lss2 is not lss1
assert g2.tensors[0]["x"].ntype.compare(
ds.output_ports["x"]) == NeuralTypeComparisonResult.SAME
assert g2.tensors[0]["y"].ntype.compare(
ds.output_ports["y"]) == NeuralTypeComparisonResult.SAME
# Internally the name "y_pred" is used, not the "bound output name": "inner_y_pred"!
assert g2.tensors[1]["y_pred"].ntype.compare(
tn.output_ports["y_pred"]) == NeuralTypeComparisonResult.SAME
# Analogically with "loss".
assert g2.tensors[2]["loss"].ntype.compare(
loss.output_ports["loss"]) == NeuralTypeComparisonResult.SAME
def test_graph_serialization_1_simple_graph_no_binding(self):
"""
Tests whether serialization of a simple graph works.
"""
# Instantiate the necessary neural modules.
dl = RealFunctionDataLayer(n=100, batch_size=1, name="tgs1_dl")
tn = TaylorNet(dim=4, name="tgs1_tn")
loss = MSELoss(name="tgs1_loss")
# Create the graph.
with NeuralGraph(operation_mode=OperationMode.training,
name="g1") as g1:
x, t = dl()
prediction1 = tn(x=x)
_ = loss(predictions=prediction1, target=t)
# Serialize the graph.
serialized_g1 = g1.serialize()
# Create a second graph - deserialize with reusing.
g2 = NeuralGraph.deserialize(serialized_g1,
reuse_existing_modules=True,
name="g2")
serialized_g2 = g2.serialize()
# Must be the same.
assert serialized_g1 == serialized_g2
# Delete modules.
del dl
del tn
del loss
# Delete graphs as they contain "hard" references to those modules.
del g1
del g2
# Create a third graph - deserialize without reusing, should create new modules.
g3 = NeuralGraph.deserialize(serialized_g1,
reuse_existing_modules=False,
name="g3")
serialized_g3 = g3.serialize()
# Must be the same.
assert serialized_g1 == serialized_g3
# Deserialize graph - without reusing modules not allowed.
with pytest.raises(KeyError):
_ = NeuralGraph.deserialize(serialized_g1,
reuse_existing_modules=False)
def test_graph_inputs_binding1_default(self):
# Create modules.
tn = TaylorNet(dim=4, name="tgi1_tn")
loss = MSELoss(name="tgi1_loss")
# Test default binding.
with NeuralGraph() as g1:
y_pred = tn(x=g1)
lss = loss(predictions=y_pred, target=g1)
assert len(g1.inputs) == 2
assert g1.input_ports["x"].compare(
tn.input_ports["x"]) == NeuralTypeComparisonResult.SAME
assert g1.input_ports["target"].compare(
loss.input_ports["target"]) == NeuralTypeComparisonResult.SAME
def test_graph_outputs_binding2(self):
# Create modules.
data_source = RealFunctionDataLayer(n=100,
batch_size=1,
name="tgo2_ds")
tn = TaylorNet(dim=4, name="tgo2_tn")
loss = MSELoss(name="tgo2_loss")
# Test default binding.
with NeuralGraph(operation_mode=OperationMode.training) as g1:
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = tn(x=x)
lss = loss(predictions=y_pred, target=y)
assert len(g1.outputs) == 4
# Test ports.
for (module, port, tensor) in [
(data_source, "x", x),
(data_source, "y", y),
(tn, "y_pred", y_pred),
(loss, "loss", lss),
]:
# Compare definitions - from outputs.
assert g1.outputs[port].ntype.compare(
module.output_ports[port]) == NeuralTypeComparisonResult.SAME
# Compare definitions - from output_ports.
assert g1.output_ports[port].compare(
module.output_ports[port]) == NeuralTypeComparisonResult.SAME
# Compare definitions - from output_tensors.
assert g1.output_tensors[port].compare(
module.output_ports[port]) == NeuralTypeComparisonResult.SAME
# Make sure that tensor was bound, i.e. input refers to the same object instance!
assert g1.output_tensors[port] is tensor
# Test manual binding.
g1.outputs["my_prediction"] = y_pred
g1.outputs["my_loss"] = lss
assert len(g1.outputs) == 2
assert g1.output_tensors["my_prediction"].compare(
tn.output_ports["y_pred"]) == NeuralTypeComparisonResult.SAME
assert g1.output_tensors["my_loss"].compare(
loss.output_ports["loss"]) == NeuralTypeComparisonResult.SAME
# Finally, make sure that the user cannot "bind" "output_ports"!
with pytest.raises(TypeError):
g1.output_ports["my_prediction"] = y_pred
def test_dag(self):
data_source = RealFunctionDataLayer(n=10000, batch_size=128)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
x, y = data_source()
y_pred = trainable_module(x=x)
_ = loss(predictions=y_pred, target=y)
def wrong():
data_source = RealFunctionDataLayer(n=10000, batch_size=128)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
x, y = data_source()
loss_tensor = loss(predictions=x, target=x)
_ = trainable_module(x=loss_tensor)
self.assertRaises(NeuralPortNmTensorMismatchError, wrong)
def test_default_output_ports(self):
""" Tests automatic binding of default output ports. """
dl = RealFunctionDataLayer(n=10, batch_size=1)
m2 = TaylorNet(dim=4)
loss = MSELoss()
with NeuralGraph() as g1:
x, t = dl()
p = m2(x=x)
# Tests output ports.
assert len(g1.output_ports) == 3
assert g1.output_ports["x"].compare(
x) == NeuralTypeComparisonResult.SAME
assert g1.output_ports["y"].compare(
t) == NeuralTypeComparisonResult.SAME
assert g1.output_ports["y_pred"].compare(
p) == NeuralTypeComparisonResult.SAME
def test_graph_serialization_4_graph_after_nesting_with_default_binding_reuse_modules(
self):
"""
Tests whether serialization works in the case when we serialize a graph after a different graph
was nested in it, with additionally bound input and output binding works (default port names).
"""
# Instantiate the necessary neural modules.
dl = RealFunctionDataLayer(n=100, batch_size=1, name="tgs4_dl")
tn = TaylorNet(dim=4, name="tgs4_tn")
loss = MSELoss(name="tgs4_loss")
# Create "model".
with NeuralGraph(operation_mode=OperationMode.both,
name="model") as model:
# Add module to graph and bind it input port 'x'.
y = tn(x=model)
# NOTE: For some reason after this call both the "tgs4_tn" and "model" objects
# remains on the module/graph registries.
# (So somewhere down there remains a strong reference to module or graph).
# This happens ONLY when passing graph as argument!
# (Check out the next test which actually removes module and graph!).
# Still, that is not an issue, as we do not expect the users
# to delete and recreate modules in their "normal" applications.
# Build the "training graph" - using the model copy.
with NeuralGraph(operation_mode=OperationMode.training,
name="tgs4_training") as training:
# Add modules to graph.
x, t = dl()
# Incorporate modules from the existing "model" graph.
p = model(x=x)
lss = loss(predictions=p, target=t)
# Serialize the "training graph".
serialized_training = training.serialize()
# Create the second graph - deserialize withoput "module reusing".
training2 = NeuralGraph.deserialize(serialized_training,
reuse_existing_modules=True)
serialized_training2 = training2.serialize()
# Must be the same.
assert serialized_training == serialized_training2
def test_explicit_graph(self):
"""
Tests the integration of an `explicit` graph with actions API.
In particular, checks whether user can pass NG instance to train().
"""
# Create modules.
dl = RealFunctionDataLayer(n=100, batch_size=4)
fx = TaylorNet(dim=4)
loss = MSELoss()
# Create the g0 graph.
g0 = NeuralGraph()
# Activate the "g0 graph context" - all operations will be recorded to g0.
with g0:
x, t = dl()
p = fx(x=x)
lss = loss(predictions=p, target=t)
# Bind the loss output.
g0.outputs["loss"] = lss
# Instantiate an optimizer to perform the `train` action.
optimizer = PtActions()
# Make sure user CANNOT pass training graph and tensors_to_optimize.
with pytest.raises(ValueError):
optimizer.train(
tensors_to_optimize=lss,
training_graph=g0,
optimization_params={
"max_steps": 1,
"lr": 0.0003
},
optimizer="sgd",
)
# But user can invoke "train" action using graph only.
optimizer.train(training_graph=g0,
optimization_params={
"max_steps": 1,
"lr": 0.0003
},
optimizer="sgd")
def test_nm_tensors_types(self):
"""
Tests whether nmTensors are correct - checking type property.
"""
# Create modules.
data_source = RealFunctionDataLayer(n=10, batch_size=1)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = trainable_module(x=x)
lss = loss(predictions=y_pred, target=y)
# Check types.
assert x.ntype.compare(
data_source.output_ports["x"]) == NeuralTypeComparisonResult.SAME
assert y.ntype.compare(
data_source.output_ports["y"]) == NeuralTypeComparisonResult.SAME
assert y_pred.ntype.compare(trainable_module.output_ports["y_pred"]
) == NeuralTypeComparisonResult.SAME
assert lss.ntype.compare(
loss.output_ports["loss"]) == NeuralTypeComparisonResult.SAME
def test_graph_inputs_binding2_manual(self):
# Create modules.
tn = TaylorNet(dim=4, name="tgi2_tn")
loss = MSELoss(name="tgi2_loss")
# Test "manual" binding.
with NeuralGraph() as g1:
# Bind the "x" input to tn.
g1.inputs["i"] = tn.input_ports["x"]
y_pred = tn(x=g1.inputs["i"])
# Bing the "target" input to loss.
g1.inputs["t"] = loss.input_ports["target"]
lss = loss(predictions=y_pred, target=g1.inputs["t"])
assert len(g1.inputs) == 2
assert g1.input_ports["i"].compare(
tn.input_ports["x"]) == NeuralTypeComparisonResult.SAME
assert g1.input_ports["t"].compare(
loss.input_ports["target"]) == NeuralTypeComparisonResult.SAME
# Finally, make sure that the user cannot "bind" "input_ports"!
with pytest.raises(TypeError):
g1.input_ports["my_prediction"] = y_pred
def test_TensorboardLogger(self, clean_up, tmpdir):
data_source = RealFunctionDataLayer(n=100, batch_size=1)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = trainable_module(x=x)
loss_tensor = loss(predictions=y_pred, target=y)
logging_dir = tmpdir.mkdir("temp")
writer = SummaryWriter(logging_dir)
tb_logger = TensorboardLogger(writer, step_freq=1)
callbacks = [tb_logger]
self.nf.train(
tensors_to_optimize=[loss_tensor],
callbacks=callbacks,
optimization_params={
"max_steps": 4,
"lr": 0.01
},
optimizer="sgd",
)
# efi.inspect("temp", tag="loss")
inspection_units = efi.get_inspection_units(str(logging_dir), "",
"loss")
# Make sure there is only 1 tensorboard file
assert len(inspection_units) == 1
# Assert that there the loss scalars has been logged 4 times
assert len(inspection_units[0].field_to_obs['scalars']) == 4
# Return deserialized parameters.
return deserialized_params
# Run on CPU.
nf = NeuralModuleFactory(placement=DeviceType.CPU)
# Instantitate RealFunctionDataLayer defaults to f=torch.sin, sampling from x=[-1, 1]
dl = RealFunctionDataLayer(n=100, f_name="cos", x_lo=-1, x_hi=1, batch_size=32)
# Instantiate a simple feed-forward, single layer neural network.
fx = CustomTaylorNet(dim=4, status=Status.error)
# Instantitate loss.
mse_loss = MSELoss()
# Export the model configuration.
fx.export_to_config("/tmp/custom_taylor_net.yml")
# Create a second instance, using the parameters loaded from the previously created configuration.
# Please note that we are calling the overriden method from the CustomTaylorNet class.
fx2 = CustomTaylorNet.import_from_config("/tmp/custom_taylor_net.yml")
# Create a graph by connecting the outputs with inputs of modules.
x, y = dl()
# Please note that in the graph we are using the "second" instance.
p = fx2(x=x)
loss = mse_loss(predictions=p, target=y)
# SimpleLossLoggerCallback will print loss values to console.
def test_graph_nesting7_topology_copy_one_module_all_manual_connect(self):
"""
Test whether when nesting of one graph into another will result in copy of the graph topology (tensors).
Case: manual binding of inputs and outputs, connects to other modules.
"""
ds = RealFunctionDataLayer(n=10, batch_size=1, name="tgn7_ds")
tn = TaylorNet(dim=4, name="tgn7_tn")
loss = MSELoss(name="tgn7_loss")
# Create the "inner graph".
with NeuralGraph(operation_mode=OperationMode.training,
name="tgn7_g1") as g1:
# Copy the input type.
g1.inputs["inner_x"] = tn.input_ports["x"]
# Manually bind the input port.
y_pred1 = tn(x=g1.inputs["inner_x"])
# Manually bind the output port.
g1.outputs["inner_y_pred"] = y_pred1
# Create the "outer graph".
with NeuralGraph(operation_mode=OperationMode.training,
name="tgn7_g2") as g2:
x, y = ds()
y_pred2 = g1(inner_x=x)
lss = loss(predictions=y_pred2, target=y)
# Check steps.
assert len(g2.steps) == 3
assert g2.steps[1] == g1.steps[0]
# Make sure that the modules are the same.
assert len(g2) == 3
assert g2["tgn7_tn"] is g1["tgn7_tn"]
# Make sure that inputs are ok.
assert len(g2.inputs) == 0
# Check outputs.
assert len(g2.outputs) == 4
assert g2.output_ports["x"].compare(
ds.output_ports["x"]) == NeuralTypeComparisonResult.SAME
assert g2.output_ports["y"].compare(
ds.output_ports["y"]) == NeuralTypeComparisonResult.SAME
assert g2.output_ports["loss"].compare(
loss.output_ports["loss"]) == NeuralTypeComparisonResult.SAME
# The manually bound name!
assert g2.output_ports["inner_y_pred"].compare(
tn.output_ports["y_pred"]) == NeuralTypeComparisonResult.SAME
# Check the output tensors.
assert len(g2.output_tensors) == 4
assert g2.output_tensors["x"] == x
assert g2.output_tensors["y"] == y
assert g2.output_tensors["loss"] == lss
# The manually bound name!
assert g2.output_tensors["inner_y_pred"] == y_pred2
# Check the "internal tensors".
assert y_pred2 is not y_pred1
assert g2.tensors[0]["x"] == x
assert g2.tensors[0]["y"] == y
assert g2.tensors[2]["loss"] == lss
# Internally the name "y_pred" is used, not the "bound output name": "inner_y_pred"!
assert g2.tensors[1]["y_pred"] == y_pred2
# Update g2: manually bound only one output.
with g2:
g2.outputs["outer_loss"] = lss
# Make sure that outputs are ok.
assert len(g2.outputs) == 1
assert g2.output_ports["outer_loss"].compare(
loss.output_ports["loss"]) == NeuralTypeComparisonResult.SAME
assert g2.output_tensors["outer_loss"] is lss
def test_rename_and_log(self, clean_up):
data_source = RealFunctionDataLayer(n=100, batch_size=1)
trainable_module = TaylorNet(dim=4)
loss = MSELoss()
# Create the graph by connnecting the modules.
x, y = data_source()
y_pred = trainable_module(x=x)
loss_tensor = loss(predictions=y_pred, target=y)
class DummyNM(NonTrainableNM):
def __init__(self):
super().__init__()
@property
def input_ports(self):
"""Returns definitions of module input ports.
Returns:
A (dict) of module's input ports names to NeuralTypes mapping
"""
return {"x": NeuralType(('B', 'D'), ChannelType())}
@property
def output_ports(self):
"""Returns definitions of module output ports.
Returns:
A (dict) of module's output ports names to NeuralTypes mapping
"""
return {"y_pred": NeuralType(('B', 'D'), ChannelType())}
def forward(self, x):
return x + 1
test = DummyNM()
extra_tensor = test(x=y_pred)
y_pred.rename("y_pred")
assert y_pred.name == "y_pred"
# Mock up both std and stderr streams.
with logging.patch_stdout_handler(StringIO()) as std_out:
self.nf.train(
tensors_to_optimize=[loss_tensor],
callbacks=[
SimpleLogger(step_freq=1,
tensors_to_log=['y_pred', extra_tensor])
],
optimization_params={
"max_steps": 4,
"lr": 0.01
},
optimizer="sgd",
)
output_lines = std_out.getvalue().splitlines()
assert len(output_lines) == 8
for i, line in enumerate(output_lines):
if i % 2 == 0:
assert y_pred.name in line
else:
assert extra_tensor.name in line
