def getIPS():
"""
Prompts to enter SID/location of IPS.
"""
while True:
try:
ips = input("Enter the IPS ID: ").lower().strip()
if NWdevice(ips).is_ips():
ips = NWdevice(ips)
break
else:
print("ERROR: SERVICE ID INVALID\n")
except AttributeError:
print('ERROR: SERVICE ID INVALID\n')
while True:
try:
ipsloc = Loccode(input("Enter the location code of "+ips+": "))
if ipsloc.is_NWloc():
if ipsloc.site == ips.site():
break
else:
print('ERROR: SITE MISMATCH DETECTED\n')
else:
print("ERROR: INVALID LOCATION\n")
except AttributeError:
print("ERROR: INVALID LOCATION\n")
return [ips,ipsloc]
def getDevices(devicetype):
"""
devicetype must be either 'firewall' or 'loadbalancer.'
Prompts to enter SIDs/speed/locations of Stand-alone gear & IPS (w/ their error handlings).
Only accepts the devicetype you specify.
Returns the provided data as a list for use in main().
nwdevice = newtwork device ID (firewall or loadbalancer)
speed = 1000 or 100 (int)
nwdeviceloc = network device location
ips = IPS ID or 'none'
"""
while True:
try:
nwdevice = NWdevice(input("Enter the "+devicetype+" ID: ").lower().strip())
if nwdevice.is_fw_or_lb(devicetype) and nwdevice.is_solo():
break
else:
print("ERROR: SERVICE ID INVALID\n")
except AttributeError:
print('ERROR: SERVICE ID INVALID\n')
while devicetype == 'firewall':
try:
speed = input('Enter the interface speed (Mbps)[1000]: ').strip() or '1000'
if not re.match(r"^10{2,3}$",speed):
print('ERROR: DATA INVALID')
else:
print('OK - speed = '+speed+'Mbps')
break
except ValueError:
print('ERROR: DATA INVALID')
speed = speed if devicetype == 'firewall' else '1000'
while True:
try:
nwdeviceloc = Loccode(input("Enter the location code of "+nwdevice+": "))
if nwdeviceloc.is_NWloc():
if nwdeviceloc.site == nwdevice.site():
break
else:
print('ERROR: SITE MISMATCH DETECTED\n')
else:
print("ERROR: INVALID LOCATION FOR MASTER\n")
except AttributeError:
print("ERROR: INVALID LOCATION\n")
while True:
try:
ips = input("Enter an IPS ID that monitors the "+devicetype+" segment(s), or type 'none': ").lower().strip().replace("'","")
if ips == 'none' or NWdevice(ips).is_ips():
break
else:
print('ERROR: INVALID SID FORMAT\n')
except AttributeError:
print('ERROR: SERVICE ID INVALID\n')
if ips != 'none':
while True:
try:
ipsloc = Loccode(input("Enter the location code of "+ips+": "))
if ipsloc.is_NWloc() and (nwdeviceloc.srr == ipsloc.srr and nwdeviceloc.rack_noa == ipsloc.rack_noa) and nwdeviceloc != ipsloc:
print("OK")
break
elif nwdeviceloc == ipsloc:
print("ERROR: The "+devicetype+" and IPS cannot take the same slot!\n")
elif not (nwdeviceloc.srr == ipsloc.srr and nwdeviceloc.rack_noa == ipsloc.rack_noa):
print("ERROR: The "+devicetype+" and IPS must be in the same rack\n")
else:
print("ERROR: INVALID LOCATION\n")
except AttributeError:
print("ERROR: SYNTAX INVALID\n")
else:
ipsloc = ''
print("OK no IPS!")
return [nwdevice,speed,nwdeviceloc,ips,ipsloc]
def getHAdevices(devicetype):
"""
devicetype must be either 'firewall' or 'loadbalancer.'
Prompts to enter SIDs/speed/locations of HA pair & IPS (w/ their error handlings).
Only accepts the devicetype you specify.
Returns the provided data as a list for use in main().
mfw = master device ID (firewall or loadbalancer)
speed = 1000 or 100 (int)
mfwloc = master device location
sfw = secondary device ID (firewall or loadbalancer)
sfwloc = secondary device location
ips = IPS ID or 'none'
"""
#import re
#from networksid import NWdevice
#from locationcode import Loccode
while True:
try:
mfw = input("Enter the master "+devicetype+" ID: ").lower().strip()
if NWdevice(mfw).is_master() and NWdevice(mfw).is_fw_or_lb(devicetype):
mfw = NWdevice(mfw)
break
else:
print("ERROR: SERVICE ID INVALID\n")
except AttributeError:
print('ERROR: SERVICE ID INVALID\n')
while devicetype == 'firewall':
try:
speed = input('Enter the interface speed (Mbps)[1000]: ').strip() or '1000'
if not re.match(r"^10{2,3}$",speed):
print('ERROR: DATA INVALID')
else:
print('OK - speed = '+speed+'Mbps')
break
except ValueError:
print('ERROR: DATA INVALID')
speed = speed if devicetype == 'firewall' else '1000'
while True:
try:
mfwloc = Loccode(input("Enter the location code of "+mfw+": "))
if mfwloc.is_masterloc():
if mfwloc.site == mfw.site():
break
else:
print('ERROR: SITE MISMATCH DETECTED\n')
else:
print("ERROR: INVALID LOCATION FOR MASTER\n")
except AttributeError:
print("ERROR: INVALID LOCATION\n")
while True:
try:
sfw = mfw.peersid()
break
except UnboundLocalError:
print('\nThis case requires you to provide a secondary '+devicetype+' ID manually.')
sfw = input('Enter the secondary '+devicetype+' ID: ').lower().strip()
if re.match(r"^(netsvc)+(\d{5})$", sfw) and NWdevice(sfw) != mfw:
break
elif re.match(r"^(netsvc)+(\d{5})$", sfw) and NWdevice(sfw) == mfw:
print('ERROR: Master and secondary cannot share the same ID!')
sfwloc = mfwloc.peerloc()
print('OK')
print("The location of secondary "+sfw+" is {0}.".format(sfwloc))
while True:
try:
ips = input("Enter an IPS ID that goes to the master segment, or type 'none': ").lower().strip().replace("'","")
if ips == 'none' or NWdevice(ips).is_ips():
break
else:
print('ERROR: INVALID SID FORMAT\n')
except AttributeError:
print('ERROR: SERVICE ID INVALID\n')
if ips != 'none':
while True:
try:
ipsloc = Loccode(input("Enter the location code of "+ips+": "))
if ipsloc.is_NWloc() and (mfwloc.srr == ipsloc.srr and mfwloc.rack_noa == ipsloc.rack_noa) and mfwloc != ipsloc:
print("OK")
break
elif mfwloc == ipsloc:
print("ERROR: Master "+devicetype+" and IPS cannot take the same slot!\n")
elif not (mfwloc.srr == ipsloc.srr and mfwloc.rack_noa == ipsloc.rack_noa):
print("ERROR: Master "+devicetype+" and IPS must be in the same rack\n")
else:
print("ERROR: INVALID LOCATION\n")
except AttributeError:
print("ERROR: SYNTAX INVALID\n")
else:
ipsloc = ''
print("OK no IPS!")
return [mfw,speed,mfwloc,sfw,sfwloc,ips,ipsloc]