def add_network():
# First get the list of adapters
response = nymea.send_command("Zigbee.GetAdapters", {})
if len(response['params']['adapters']) == 0:
print "There are no adapters available."
return None
adapterList = [];
for adapter in response['params']['adapters']:
adapterList.append("%s (%s) - %s" % (adapter['description'], adapter['serialPort'], adapter['name']))
selection = nymea.get_selection("Please select a device descriptor", adapterList)
selectedAdapter = {}
if selection != None:
selectedAdapter = response['params']['adapters'][selection]
else:
print "ERROR: invalid adapter selection."
return None
print("Selected adapter:")
nymea.print_json_format(selectedAdapter)
params = {}
params["serialPort"] = selectedAdapter["serialPort"]
params["baudRate"] = selectedAdapter["baudRate"]
params["backend"] = selectedAdapter["backend"]
response = nymea.send_command("Zigbee.AddNetwork", params)
print("Add network returned %s" % response["params"]["zigbeeError"])
if response["params"]["zigbeeError"] == "ZigbeeErrorNoError":
print("New network has the uuid %s" % response["params"]["networkUuid"])
def notification_sniffer(nymeaHost, nymeaPort):
global commandId
commandId = 0
print "Connecting notification handler..."
try:
tn = telnetlib.Telnet(nymeaHost, nymeaPort)
except:
print "ERROR: notification socket could not connect the to nymea-server. \n"
return None
print "...OK \n"
#enable_notification(notificationSocket)
enable_notification(tn.get_socket())
try:
x = None
while (x != ord('\n') and x != 27):
socket_list = [sys.stdin, tn.get_socket()]
read_sockets, write_sockets, error_sockets = select.select(
socket_list, [], [])
for sock in read_sockets:
# notification messages:
if sock == tn.get_socket():
packet = tn.read_until("}\n")
packet = json.loads(packet)
nymea.print_json_format(packet)
elif sock == sys.stdin:
x = sys.stdin.readline()
return None
finally:
tn.close()
print "Notification socket closed."
def list_rule_details():
ruleDescription = select_rule()
if ruleDescription == None:
print "\n No rules found"
return None
params = {}
params['ruleId'] = ruleDescription['id']
rule = nymea.send_command("Rules.GetRuleDetails", params)['params']['rule']
print nymea.print_json_format(rule)
nymea.debug_stop()
print "========================================================"
print "-> Details for rule \"%s\" (%s):\n" % (rule['name'], rule['id'])
print "Rule is %s" % (print_rule_enabled_status(bool(rule['enabled'])))
print "Rule is %s" % (print_rule_active_status(bool(rule['active'])))
print "Rule is %s" % (print_rule_executable_status(bool(
rule['executable'])))
print "\nTimeDescriptor:\n"
timedescriptor.printTimeDescriptor(rule['timeDescriptor'])
if len(rule['eventDescriptors']) > 0:
print "\nEvents:\n"
events.print_eventDescriptors(rule['eventDescriptors'])
if rule['stateEvaluator']:
print "\nStates:\n",
states.print_stateEvaluator(rule['stateEvaluator'])
print "\nActions:\n"
ruleactions.print_ruleActionList(rule['actions'])
if len(rule['exitActions']) > 0:
print "\nExit actions:\n"
ruleactions.print_ruleActionList(rule['exitActions'])
def show_network_status():
params = {}
response = nymea.send_command("NetworkManager.GetNetworkStatus", params)
if 'status' in response['params']:
nymea.print_json_format(response['params']['status'])
else:
nymea.print_networkmanager_error_code(
response['params']['networkManagerError'])
def list_available_adapters():
params = {}
response = nymea.send_command("Zigbee.GetAdapters", params)
if len(response['params']['adapters']) == 0:
print "There are no adapters available."
return None
nymea.print_json_format(response['params'])
def print_stateType():
deviceId = devices.select_configured_device()
device = devices.get_device(deviceId)
if device == None:
return None
stateType = select_stateType(device['deviceClassId'])
if stateType == None:
return None
nymea.print_json_format(stateType)
def method_last_72_hours():
global nymeaHost
global nymeaPort
params = logs.create_last_time_logfilter(72 * 60)
print "\nThe filter:\n"
nymea.print_json_format(params)
nymea.debug_stop()
if params:
logs.log_window(nymeaHost, nymeaPort, params)
def method_rule_logs():
global nymeaHost
global nymeaPort
params = logs.create_rule_logfilter()
print "\nThe filter:\n"
nymea.print_json_format(params)
nymea.debug_stop()
if params:
logs.log_window(nymeaHost, nymeaPort, params)
def print_eventType():
deviceId = devices.select_configured_device()
device = devices.get_device(deviceId)
if not device:
return None
eventType = select_eventType(device['deviceClassId'])
if not eventType:
print "\n This device has no events"
return None
nymea.print_json_format(eventType)
def remove_network():
selectedNetwork = selectNetwork("Please select the network you want to remove")
if selectedNetwork is None:
return None
print("Selected network:")
nymea.print_json_format(selectedNetwork)
params = {}
params["networkUuid"] = selectedNetwork["networkUuid"]
response = nymea.send_command("Zigbee.RemoveNetwork", params)
print("Remove network returned %s" % response["params"]["zigbeeError"])
def set_language():
params = {}
languages = get_languages()
selection = nymea.get_selection(
"Please select one of following allowed values:", languages)
if selection == None:
return None
params['language'] = languages[selection]
response = nymea.send_command("Configuration.SetLanguage", params)
nymea.print_json_format(response['params'])
def set_debug_server_interface():
params = {}
enabled = selector.getYesNoSelection(
"Should the debug server interface be enabled?")
if enabled == None:
return None
params['enabled'] = enabled
response = nymea.send_command("Configuration.SetDebugServerEnabled",
params)
nymea.print_json_format(response['params'])
def enable_cloud_connection():
params = {}
options = ["enable", "disable"]
selection = nymea.get_selection(
"Do you want to do with the cloud connection: ", options)
if selection == 0:
params['enable'] = True
else:
params['enable'] = False
response = nymea.send_command("Cloud.Enable", params)
nymea.print_json_format(response['params'])
def set_timezone():
params = {}
timeZones = []
timeZones = get_timezones()
selection = nymea.get_selection(
"Please select one of following allowed values:", timeZones)
if selection == None:
return None
params['timeZone'] = timeZones[selection]
response = nymea.send_command("Configuration.SetTimeZone", params)
nymea.print_json_format(response['params'])
def print_actionType():
deviceId = devices.select_configured_device()
if deviceId == None:
return None
device = devices.get_device(deviceId)
actionType = select_actionType(device['deviceClassId'])
#print nymea.print_json_format(actionType)
if actionType == None:
print "\n This device has no actions"
return None
actionType = get_actionType(actionType['id'])
nymea.print_json_format(actionType)
def add_rule():
params = {}
params['name'] = raw_input("Please enter the name of the rule: ")
print "\n========================================================"
if selector.getYesNoSelection("Do you want to create a TimeDescriptor"):
params['timeDescriptor'] = timedescriptor.createTimeDescriptor()
if selector.getYesNoSelection(
"Do you want to define \"Events\" for this rule?"):
eventDescriptors = events.create_eventDescriptors()
print nymea.print_json_format(eventDescriptors)
params['eventDescriptors'] = eventDescriptors
if selector.getYesNoSelection(
"Do you want to add conditions (\"States\") for the events?"):
print "\n========================================================"
raw_input("-> Create a state descriptor! ")
stateEvaluator = states.create_stateEvaluator()
params['stateEvaluator'] = stateEvaluator
params['actions'] = ruleactions.create_rule_actions(eventDescriptors)
else:
if selector.getYesNoSelection(
"Do you want to define \"States\" for this rule?"):
print "\n========================================================"
raw_input("-> Press \"enter\" to create a state descriptor! ")
params['stateEvaluator'] = states.create_stateEvaluator()
params['actions'] = ruleactions.create_rule_actions()
if selector.getYesNoSelection(
"Do you want to add (\"ExitActions\") for this rule?"):
params['exitActions'] = ruleactions.create_rule_actions()
params['enabled'] = selector.getBoolSelection(
"-> Should the rule initially be enabled?")
params['executable'] = selector.getBoolSelection(
"-> Should the rule be executable?")
print "\n========================================================\n"
print "Adding rule with params:\n", nymea.print_json_format(params)
response = nymea.send_command("Rules.AddRule", params)
nymea.print_rule_error_code(response['params']['ruleError'])
def list_device_states():
deviceId = select_configured_device()
if deviceId == None:
return None
device = get_device(deviceId)
deviceClass = get_deviceClass(device['deviceClassId'])
nymea.print_json_format(device)
print "-> States of device \"%s\" %s:\n" % (get_full_device_name(deviceId),
device['id'])
for i in range(len(deviceClass['stateTypes'])):
params = {}
params['deviceId'] = deviceId
params['stateTypeId'] = deviceClass['stateTypes'][i]['id']
response = nymea.send_command("Devices.GetStateValue", params)
print "%35s: %s" % (deviceClass['stateTypes'][i]['displayName'],
response['params']['value'])
def selectNetwork(message):
params = {}
response = nymea.send_command("Zigbee.GetNetworks", params)
nymea.print_json_format(response['params'])
if len(response['params']['zigbeeNetworks']) == 0:
print "ERROR: there are no networks configured."
return None
networkList = [];
for network in response['params']['zigbeeNetworks']:
networkList.append("%s %s (channel %s) - %s" % (network['backend'], network['macAddress'], network['channel'], network['serialPort']))
selection = nymea.get_selection(message, networkList)
selectedNetwork = {}
if selection != None:
return response['params']['zigbeeNetworks'][selection]
else:
return None
def add_configured_device(deviceClassId):
deviceClass = get_deviceClass(deviceClassId)
params = {}
params['deviceClassId'] = deviceClassId
params['name'] = raw_input("\nEnter the \"name\" of the device: ")
deviceParams = parameters.read_params(deviceClass['paramTypes'])
if deviceParams:
params['deviceParams'] = deviceParams
print "\nAdding device with params:", nymea.print_json_format(params)
response = nymea.send_command("Devices.AddConfiguredDevice", params)
nymea.print_device_error_code(response['params']['deviceError'])
def edit_params(currentDeviceParams, paramTypes):
params = []
for paramType in paramTypes:
print "\nThe ParamType looks like this:\n", nymea.print_json_format(
paramType)
if 'readOnly' in paramType and paramType['readOnly']:
print "--------------------------------------------------------"
print "\nThe param \"%s\" is not writable! (current = \"%s\")\n" % (
paramType['displayName'],
get_param_value(paramType['id'], currentDeviceParams))
raw_input("\nPress \"enter\" to continue...\n")
print "--------------------------------------------------------"
continue
param = {}
if any("allowedValues" in item
for item in paramType) and len(paramType['allowedValues']) != 0:
title = "Please select one of following allowed values: (current = \"%s\")" % (
get_param_value(paramType['id'], currentDeviceParams))
selection = nymea.get_selection(title, paramType['allowedValues'])
if selection == None:
return None
paramValue = paramType['allowedValues'][selection]
param['paramTypeId'] = paramType['id']
param['value'] = paramValue
params.append(param)
else:
# make bool selectable to make shore they are "true" or "false"
if paramType['type'] == "Bool":
boolTypes = ["true", "false"]
selectionString = "Please enter value (currently: \"%s\") for parameter \"%s\" (type: %s): " % (
get_param_value(paramType['id'], currentDeviceParams),
paramType['displayName'], paramType['type'])
selection = nymea.get_selection(selectionString, boolTypes)
if selection == None:
return None
paramValue = boolTypes[selection]
param['paramTypeId'] = paramType['id']
param['value'] = paramValue
else:
paramValue = raw_input(
"Please enter value (currently: \"%s\") for parameter \"%s\" (type: %s): "
% (get_param_value(paramType['id'], currentDeviceParams),
paramType['displayName'], paramType['type']))
param['paramTypeId'] = paramType['id']
param['value'] = paramValue
params.append(param)
return params
def create_logfilter():
params = {}
boolTypes = ["yes", "no"]
# Devices
selection = nymea.get_selection("Do you want to filter for \"Devices\"? ",
boolTypes)
if boolTypes[selection] == "yes":
deviceIds = []
deviceId = devices.select_configured_device()
deviceIds.append(deviceId)
finished = False
while not finished:
selection = nymea.get_selection(
"Do you want to add an other \"Device\"? ", boolTypes)
if boolTypes[selection] == "no":
finished = True
break
deviceId = devices.select_configured_device()
if not deviceId:
params['deviceIds'] = deviceIds
return params
deviceIds.append(deviceId)
params['deviceIds'] = deviceIds
# LoggingSources
selection = nymea.get_selection(
"Do you want to filter for \"LoggingSource\"? ", boolTypes)
if boolTypes[selection] == "yes":
sources = []
finished = False
loggingSources = [
"LoggingSourceSystem", "LoggingSourceEvents",
"LoggingSourceActions", "LoggingSourceStates", "LoggingSourceRules"
]
selection = nymea.get_selection("Please select a \"LoggingSource\": ",
loggingSources)
if selection:
sources.append(loggingSources[selection])
else:
finished = True
while not finished:
selection = nymea.get_selection(
"Do you want to add an other \"LoggingSource\"? ", boolTypes)
if boolTypes[selection] == "no":
finished = True
break
selection = get_selection("Please select a \"LoggingSource\": ",
loggingSources)
if selection:
sources.append(loggingSources[selection])
else:
finished = True
break
params['loggingSources'] = sources
# LoggingLevel
selection = nymea.get_selection(
"Do you want to filter for \"LoggingLevel\"? ", boolTypes)
if boolTypes[selection] == "yes":
levels = []
loggingLevels = ["LoggingLevelInfo", "LoggingLevelAlert"]
selection = nymea.get_selection("Please select a \"LoggingLevel\": ",
loggingLevels)
if selection:
levels.append(loggingLevels[selection])
params['loggingLevels'] = levels
# LoggingEventType
selection = nymea.get_selection(
"Do you want to filter for \"LoggingEventType\"? ", boolTypes)
if boolTypes[selection] == "yes":
types = []
loggingEventTypes = [
"LoggingEventTypeTrigger", "LoggingEventTypeActiveChange",
"LoggingEventTypeEnabledChange", "LoggingEventTypeActionsExecuted",
"LoggingEventTypeExitActionsExecuted"
]
selection = nymea.get_selection(
"Please select a \"LoggingEventType\": ", loggingEventTypes)
if selection:
types.append(loggingEventTypes[selection])
params['eventTypes'] = types
# Value
selection = nymea.get_selection(
"Do you want to filter for certain log \"Values\"? ", boolTypes)
if boolTypes[selection] == "yes":
values = []
finished = False
value = raw_input("Please enter value which should be filtered out: ")
values.append(value)
while not finished:
selection = nymea.get_selection(
"Do you want to add an other \"Value\"? ", boolTypes)
if boolTypes[selection] == "no":
finished = True
break
value = raw_input(
"Please enter value which should be filtered out: ")
values.append(value)
params['values'] = values
# Times
selection = nymea.get_selection("Do you want to add a \"TimeFilter\"? ",
boolTypes)
if boolTypes[selection] == "yes":
timeFilters = []
finished = False
timeFilters.append(create_time_filter())
while not finished:
selection = nymea.get_selection(
"Do you want to add an other \"TimeFilter\"? ", boolTypes)
if boolTypes[selection] == "no":
finished = True
break
timeFilters.append(create_time_filter())
params['timeFilters'] = timeFilters
nymea.print_json_format(params)
nymea.debug_stop()
return params
def list_network_devices():
params = {}
response = nymea.send_command("NetworkManager.GetNetworkDevices", params)
nymea.print_json_format(response['params'])
def print_cloud_status():
params = {}
response = nymea.send_command("Cloud.GetConnectionStatus", params)
nymea.print_json_format(response['params'])
def list_networks():
params = {}
response = nymea.send_command("Zigbee.GetNetworks", params)
nymea.print_json_format(response['params'])
def set_serverName():
params = {}
params['serverName'] = raw_input("Please enter the server name:")
response = nymea.send_command("Configuration.SetServerName", params)
nymea.print_json_format(response['params'])
def list_backends():
params = {}
response = nymea.send_command("Zigbee.GetAvailableBackends", params)
nymea.print_json_format(response['params'])
def show_tcpServer_configuration():
response = nymea.send_command("Configuration.GetConfigurations")
print "TCP server configuration\n"
nymea.print_json_format(response['params']['tcpServerConfigurations'])
def create_stateDescriptor():
print "-> Creating a new stateDescriptor:\n"
deviceId = devices.select_configured_device()
device = devices.get_device(deviceId)
if device == None:
return None
stateType = select_stateType(device['deviceClassId'])
if stateType == None:
return None
valueOperator = nymea.select_valueOperator(stateType['displayName'])
stateDescriptor = {}
print "\nThe StateType looks like this:\n", nymea.print_json_format(
stateType)
print "Please enter the value for state \"%s\" (type: %s): " % (
stateType['displayName'], stateType['type'])
# make bool selectable to make shore they are "true" or "false"
if any("possibleValues" in item for item in stateType):
# has to be a string (for sorting list)
possibleValues = []
for value in stateType['possibleValues']:
possibleValues.append(str(value))
selection = nymea.get_selection(
"Please select one of following possible values:", possibleValues)
if selection == None:
return None
stateValue = stateType['possibleValues'][selection]
else:
# make bool selectable to make shore they are "true" or "false"
if stateType['type'] == "Bool":
boolTypes = ["true", "false"]
selectionString = "Please enter the value for state \"%s\" (type: %s): " % (
stateType['displayName'], stateType['type'])
selection = nymea.get_selection(selectionString, boolTypes)
if selection == None:
return None
stateValue = boolTypes[selection]
elif stateType['type'] == "Int":
stateValue = int(
raw_input("%s %s " %
(stateType['displayName'],
nymea.get_valueOperator_string(valueOperator))))
elif stateType['type'] == "Double":
stateValue = float(
raw_input("%s %s " %
(stateType['displayName'],
nymea.get_valueOperator_string(valueOperator))))
elif stateType['type'] == "Uint":
stateValue = int(
raw_input("%s %s " %
(stateType['displayName'],
nymea.get_valueOperator_string(valueOperator))))
else:
stateValue = raw_input(
"%s %s " % (stateType['displayName'],
nymea.get_valueOperator_string(valueOperator)))
stateDescriptor['deviceId'] = deviceId
stateDescriptor['stateTypeId'] = stateType['id']
stateDescriptor['value'] = stateValue
stateDescriptor['operator'] = valueOperator
print nymea.print_json_format(stateDescriptor)
return stateDescriptor
def edit_rule():
ruleDescription = select_rule()
if ruleDescription == None:
print "\n No rules found"
return None
boolTypes = ["yes", "no"]
params = {}
params['ruleId'] = ruleDescription['id']
originalRule = nymea.send_command("Rules.GetRuleDetails",
params)['params']['rule']
print "\n========================================================"
print "Original rule JSON:\n"
print nymea.print_json_format(originalRule)
if selector.getYesNoSelection(
"Do you want to chane the name (current = \"%s\"): " %
(originalRule['name'])):
print "\n========================================================"
params['name'] = raw_input(
"Please enter the new name of the rule (current = \"%s\"): " %
(originalRule['name']))
else:
params['name'] = originalRule['name']
if len(originalRule['eventDescriptors']) > 0:
print "\nCurrent \"Events\":\n"
events.print_eventDescriptors(originalRule['eventDescriptors'])
print "\n========================================================\n"
input = raw_input("Do you want change this \"Events\" (y/N): ")
if input == "y":
eventDescriptors = events.create_eventDescriptors()
print nymea.print_json_format(eventDescriptors)
params['eventDescriptors'] = eventDescriptors
else:
params['eventDescriptors'] = originalRule['eventDescriptors']
if originalRule['stateEvaluator']:
print "\nStates:\n",
states.print_stateEvaluator(originalRule['stateEvaluator'])
if selector.getYesNoSelection(
"Do you want to add conditions (\"States\") for the events?"):
print "\n========================================================"
raw_input("-> Create a state descriptor! ")
stateEvaluator = states.create_stateEvaluator()
params['stateEvaluator'] = stateEvaluator
print "\ncurrent \"Actions\":\n"
ruleactions.print_ruleActionList(originalRule['actions'])
print "\n========================================================\n"
input = raw_input("Do you want change this \"Actions\" (y/N): ")
if input == "y":
params['actions'] = ruleactions.create_rule_actions()
else:
params['actions'] = originalRule['actions']
else:
if selector.getYesNoSelection(
"Do you want to define \"States\" for this rule?"):
print "\n========================================================"
raw_input("-> Press \"enter\" to create a state descriptor! ")
params['stateEvaluator'] = states.create_stateEvaluator()
# there will always be at least one action
print "\n========================================================\n"
print "Current \"Actions\":\n"
ruleactions.print_ruleActionList(originalRule['actions'])
print "\n========================================================\n"
input = raw_input("Do you want change this \"Actions\" (y/N): ")
if input == "y":
params['actions'] = ruleactions.create_rule_actions()
else:
params['actions'] = originalRule['actions']
if len(originalRule['exitActions']) > 0:
print "\n========================================================\n"
print "Current \"Actions\":\n"
ruleactions.print_ruleActionList(originalRule['exitActions'])
input = raw_input("Do you want change this \"Events\" (y/N): ")
if input == "y":
params['exitActions'] = ruleactions.create_rule_actions()
else:
params['exitActions'] = originalRule['exitActions']
else:
if selector.getYesNoSelection(
"Do you want to add (\"ExitActions\") for this rule?"):
params['exitActions'] = ruleactions.create_rule_actions()
params['enabled'] = selector.getBoolSelection(
"-> Should the rule initially be enabled?")
params['executable'] = selector.getBoolSelection(
"-> Should the rule be executable?")
print "\n========================================================\n"
print "Edit rule with params:\n", nymea.print_json_format(params)
response = nymea.send_command("Rules.EditRule", params)
nymea.print_rule_error_code(response['params']['ruleError'])
def read_ruleActionParams(paramTypes, eventDescriptors=[]):
params = []
for paramType in paramTypes:
print nymea.print_json_format(paramType)
if any("allowedValues" in item for item in paramType):
selection = nymea.get_selection(
"Please select one of following allowed values:",
paramType['allowedValues'])
if selection == None:
return None
paramValue = paramType['allowedValues'][selection]
param = {}
param['paramTypeId'] = paramType['id']
param['value'] = paramValue
params.append(param)
else:
# check if we want normal action params or if we want to use an eventtypeid
if eventDescriptors:
selectionTypes = ["yes", "no"]
selectionText = "-> Should the ruleActionParam \"%s\" depend on an event?" % (
paramType['displayName'])
selection = nymea.get_selection(selectionText, selectionTypes)
if selection == None:
return None
if selectionTypes[selection] == "yes":
eventTypeIds = []
for i in eventDescriptors:
eventTypeIds.append(i['eventTypeId'])
selection = nymea.get_selection(
"Please select an eventTypeId", eventTypeIds)
eventTypeId = eventTypeIds[selection]
eventType = events.get_eventType(eventTypeId)
eventParamNames = []
eventParamTypeIds = []
for i in eventType['paramTypes']:
eventParamNames.append(i['displayName'])
eventParamTypeIds.append(i['id'])
paramSelection = nymea.get_selection(
"Please select the name of the eventParam for the action",
eventParamNames)
param = {}
param['paramTypeId'] = paramType['id']
param['eventTypeId'] = eventTypeId
param['eventParamTypeId'] = eventParamTypeIds[
paramSelection]
params.append(param)
else:
if paramType['type'] == "Bool":
boolTypes = ["true", "false"]
selectionString = "Please enter value for parameter %s (type: %s): " % (
paramType['displayName'], paramType['type'])
selection = nymea.get_selection(
selectionString, boolTypes)
if selection == None:
return None
paramValue = boolTypes[selection]
elif paramType['type'] == "Int":
paramValue = int(
raw_input(
"Please enter value for parameter \"%s\" (type: %s): "
%
(paramType['displayName'], paramType['type'])))
elif paramType['type'] == "Double":
paramValue = double(
raw_input(
"Please enter value for parameter \"%s\" (type: %s): "
%
(paramType['displayName'], paramType['type'])))
elif paramType['type'] == "Uint":
paramValue = uint(
raw_input(
"Please enter value for parameter \"%s\" (type: %s): "
%
(paramType['displayName'], paramType['type'])))
else:
paramValue = raw_input(
"Please enter value for parameter \"%s\" (type: %s): "
% (paramType['displayName'], paramType['type']))
param = {}
param['paramTypeId'] = paramType['id']
param['value'] = paramValue
params.append(param)
else:
# make bool selectable to make shore they are "true" or "false"
if paramType['type'] == "Bool":
boolTypes = ["true", "false"]
selectionString = "Please enter value for parameter %s (type: %s): " % (
paramType['displayName'], paramType['type'])
selection = nymea.get_selection(selectionString, boolTypes)
if selection == None:
return None
paramValue = boolTypes[selection]
elif paramType['type'] == "Int":
paramValue = int(
raw_input(
"Please enter value for parameter \"%s\" (type: %s): "
% (paramType['displayName'], paramType['type'])))
elif paramType['type'] == "Double":
paramValue = float(
raw_input(
"Please enter value for parameter \"%s\" (type: %s): "
% (paramType['displayName'], paramType['type'])))
elif paramType['type'] == "Uint":
paramValue = int(
raw_input(
"Please enter value for parameter \"%s\" (type: %s): "
% (paramType['displayName'], paramType['type'])))
else:
paramValue = raw_input(
"Please enter value for parameter \"%s\" (type: %s): "
% (paramType['displayName'], paramType['type']))
param = {}
param['paramTypeId'] = paramType['id']
param['value'] = paramValue
params.append(param)
return params