def run(self, progressCallback=None):
try:
printer.disconnect()
except:
pass
time.sleep(0.5)
hexFile = intelHex.readHex(self._filename)
programmer = stk500v2.Stk500v2()
programmer.progressCallback = progressCallback if progressCallback else self.onProgress
try:
programmer.connect(self._port)
except ispBase.IspError:
self._logger.error(
'Failed to find machine for firmware upgrade! Is your machine had been connected?'
)
if programmer.isConnected():
self._logger.info("Uploading firmware...")
try:
programmer.programChip(hexFile)
self._logger.info("Done! Installed firmware: %s" %
(os.path.basename(self._filename)))
except ispBase.IspError as e:
self._logger.error("Failed to write firmware.\n" + str(e))
try:
programmer.close()
except:
pass
time.sleep(0.5)
printer.connect(port=self._port,
baudrate=settings().get(["serial", "baudrate"]))
def connectionCommand(request=None):
valid_commands = {"connect": ["autoconnect"], "disconnect": []}
command, data, response = util.getJsonCommandFromRequest(
request, valid_commands)
print "connectionCommand", command, data, response, "connectionCommand"
if response is not None:
return response
if command == "connect":
options = getConnectionOptions()
port = None
baudrate = None
if "port" in data.keys():
port = data["port"]
if port not in options["ports"]:
return make_response("Invalid port: %s" % port, 400)
if "baudrate" in data.keys():
baudrate = data["baudrate"]
if baudrate not in options["baudrates"]:
return make_response("Invalid baudrate: %d" % baudrate, 400)
if "save" in data.keys() and data["save"]:
settings().set(["serial", "port"], port)
settings().setInt(["serial", "baudrate"], baudrate)
if "autoconnect" in data.keys():
settings().setBoolean(["serial", "autoconnect"],
data["autoconnect"])
settings().save()
printer.connect(port=port, baudrate=baudrate)
elif command == "disconnect":
printer.disconnect()
return NO_CONTENT
def connectionCommand():
valid_commands = {
"connect": ["autoconnect"],
"disconnect": []
}
command, data, response = util.getJsonCommandFromRequest(request, valid_commands)
if response is not None:
return response
if command == "connect":
options = getConnectionOptions()
port = None
baudrate = None
if "port" in data.keys():
port = data["port"]
if port not in options["ports"]:
return make_response("Invalid port: %s" % port, 400)
if "baudrate" in data.keys():
baudrate = data["baudrate"]
if baudrate not in options["baudrates"]:
return make_response("Invalid baudrate: %d" % baudrate, 400)
if "save" in data.keys() and data["save"]:
settings().set(["serial", "port"], port)
settings().setInt(["serial", "baudrate"], baudrate)
settings().setBoolean(["serial", "autoconnect"], data["autoconnect"])
settings().save()
printer.connect(port=port, baudrate=baudrate)
elif command == "disconnect":
printer.disconnect()
return jsonify(SUCCESS)
def connectionCommand():
valid_commands = {"connect": [], "disconnect": []}
command, data, response = get_json_command_from_request(
request, valid_commands)
if response is not None:
return response
if command == "connect":
connection_options = get_connection_options()
port = None
port1 = None
projector = None
baudrate = None
printerProfile = None
if "port" in data.keys():
port = data["port"]
if port not in connection_options["ports"]:
return make_response("Invalid port: %s" % port, 400)
if "baudrate" in data.keys():
baudrate = data["baudrate"]
if baudrate not in connection_options["baudrates"]:
return make_response("Invalid baudrate: %d" % baudrate, 400)
if "printerProfile" in data.keys():
printerProfile = data["printerProfile"]
if not printerProfileManager.exists(printerProfile):
return make_response(
"Invalid printer profile: %s" % printerProfile, 400)
if "save" in data.keys() and data["save"]:
port1 = data["port1"]
projector = data["projector"]
settings().set(["serial", "port"], port)
settings().set(["serial", "port1"], port1)
settings().set(["serial", "projector"], projector)
settings().setInt(["serial", "baudrate"], baudrate)
printerProfileManager.set_default(printerProfile)
if "autoconnect" in data.keys():
settings().setBoolean(["serial", "autoconnect"],
data["autoconnect"])
settings().save()
printer.connect(port=port, baudrate=baudrate, profile=printerProfile)
elif command == "disconnect":
printer.disconnect()
return NO_CONTENT
def connectionCommand():
valid_commands = {
"connect": [],
"disconnect": [],
"fake_ack": []
}
command, data, response = get_json_command_from_request(request, valid_commands)
if response is not None:
return response
if command == "connect":
connection_options = get_connection_options()
port = None
baudrate = None
printerProfile = None
if "port" in data.keys():
port = data["port"]
if port not in connection_options["ports"] and port != "AUTO":
return make_response("Invalid port: %s" % port, 400)
if "baudrate" in data.keys():
baudrate = data["baudrate"]
if baudrate not in connection_options["baudrates"] and baudrate != 0:
return make_response("Invalid baudrate: %d" % baudrate, 400)
if "printerProfile" in data.keys():
printerProfile = data["printerProfile"]
if not printerProfileManager.exists(printerProfile):
return make_response("Invalid printer profile: %s" % printerProfile, 400)
if "save" in data.keys() and data["save"]:
settings().set(["serial", "port"], port)
settings().setInt(["serial", "baudrate"], baudrate)
printerProfileManager.set_default(printerProfile)
if "autoconnect" in data.keys():
settings().setBoolean(["serial", "autoconnect"], data["autoconnect"])
settings().save()
printer.connect(port=port, baudrate=baudrate, profile=printerProfile)
elif command == "disconnect":
printer.disconnect()
elif command == "fake_ack":
printer.fake_ack()
return NO_CONTENT
def connectionCommand():
valid_commands = {"connect": [], "disconnect": [], "fake_ack": []}
command, data, response = get_json_command_from_request(
request, valid_commands)
if response is not None:
return response
if command == "connect":
connection_options = printer.__class__.get_connection_options()
port = None
baudrate = None
printerProfile = None
if "port" in data:
port = data["port"]
if port not in connection_options["ports"] and port != "AUTO":
abort(400, description="port is invalid")
if "baudrate" in data:
baudrate = data["baudrate"]
if baudrate not in connection_options[
"baudrates"] and baudrate != 0:
abort(400, description="baudrate is invalid")
if "printerProfile" in data:
printerProfile = data["printerProfile"]
if not printerProfileManager.exists(printerProfile):
abort(400, description="printerProfile is invalid")
if "save" in data and data["save"]:
settings().set(["serial", "port"], port)
settings().setInt(["serial", "baudrate"], baudrate)
printerProfileManager.set_default(printerProfile)
if "autoconnect" in data:
settings().setBoolean(["serial", "autoconnect"],
data["autoconnect"])
settings().save()
printer.connect(port=port, baudrate=baudrate, profile=printerProfile)
elif command == "disconnect":
printer.disconnect()
elif command == "fake_ack":
printer.fake_ack()
return NO_CONTENT
def connect(): if "command" in request.values.keys() and request.values["command"] == "connect": port = None baudrate = None if "port" in request.values.keys(): port = request.values["port"] if "baudrate" in request.values.keys(): baudrate = request.values["baudrate"] if "save" in request.values.keys(): settings().set(["serial", "port"], port) settings().setInt(["serial", "baudrate"], baudrate) settings().save() if "autoconnect" in request.values.keys(): settings().setBoolean(["serial", "autoconnect"], True) settings().save() printer.connect(port=port, baudrate=baudrate) elif "command" in request.values.keys() and request.values["command"] == "disconnect": printer.disconnect() return jsonify(SUCCESS)
def restartServer(self):
if platform == "linux" or platform == "linux2":
from astroprint.boxrouter import boxrouterManager
from octoprint.server import printer
#let's be nice about shutthing things down
br = boxrouterManager()
br.boxrouter_disconnect()
printer.disconnect()
actions = self._settings.get(["system", "actions"])
for a in actions:
if a['action'] == 'astrobox-restart':
subprocess.call(a['command'].split(' '))
return True
subprocess.call(['restart', 'astrobox'])
return True
def restartServer(self):
if platform == "linux" or platform == "linux2":
from astroprint.boxrouter import boxrouterManager
from octoprint.server import printer
#let's be nice about shutthing things down
br = boxrouterManager()
br.boxrouter_disconnect()
printer.disconnect()
actions = self._settings.get(["system", "actions"])
for a in actions:
if a['action'] == 'astrobox-restart':
subprocess.call(a['command'].split(' '))
return True
subprocess.call(['restart', 'astrobox'])
return True
def connect():
command = requests.values.get("command", None)
if command == "connect":
port = requests.values.get("port", None)
baudrate = requests.values.get("baudrate", None)
if "save" in request.values:
settings.set("serial", "port", port)
settings.set("serial", "baudrate", baudrate)
settings.save()
if "autoconnect" in request.values:
settings.set("serial", "autoconnect", True)
settings.save()
printer.connect(port=port, baudrate=baudrate)
elif command == "disconnect":
printer.disconnect()
return jsonify(SUCCESS)
def connect():
if "command" in request.values.keys(
) and request.values["command"] == "connect":
port = None
baudrate = None
if "port" in request.values.keys():
port = request.values["port"]
if "baudrate" in request.values.keys():
baudrate = request.values["baudrate"]
if "save" in request.values.keys():
settings().set(["serial", "port"], port)
settings().setInt(["serial", "baudrate"], baudrate)
settings().save()
if "autoconnect" in request.values.keys():
settings().setBoolean(["serial", "autoconnect"], True)
settings().save()
printer.connect(port=port, baudrate=baudrate)
elif "command" in request.values.keys(
) and request.values["command"] == "disconnect":
printer.disconnect()
return jsonify(SUCCESS)
