def _get_printer_info(self, printer: Printer) -> Dict:
printer_info = printer.__dict__.copy()
octorest_client = None
try:
session = requests.Session()
# overriding the default session OctoRest uses to set my desired timeout
session.get = partial(session.get, timeout=3)
octorest_client = OctoRest(url=printer.url,
apikey=printer.apiKey,
session=session)
except (RuntimeError, requests.exceptions.ConnectionError):
printer_info['state'] = "OctoPrint unavailable"
return printer_info
printer_info['state'] = octorest_client.state()
# Get the printer model
printer_profiles = octorest_client.printer_profiles()['profiles']
# Assuming printer_profiles is not empty, and there's one profile marked as default
default_profile = next(profile
for profile in printer_profiles.values()
if profile['default'] is True)
printer_info['model'] = default_profile['model']
printer_info['jobInfo'] = octorest_client.job_info()
return printer_info
def get_printer_info():
try:
client = OctoRest(url=ocfg['url'], apikey=ocfg['apikey'])
message = ""
message += str(client.version) + "\n"
message += str(client.job_info()) + "\n"
printing = client.printer()['state']['flags']['printing']
if printing:
message += "Currently printing!\n"
else:
message += "Not currently printing...\n"
return message
except Exception as e:
print(e)
def get_printer_info():
try:
client = OctoRest(url="http://octopi.local", apikey="YouShallNotPass")
message = ""
message += str(client.version) + "\n"
message += str(client.job_info()) + "\n"
printing = client.printer()['state']['flags']['printing']
if printing:
message += "Currently printing!\n"
else:
message += "Not currently printing...\n"
return message
except Exception as e:
print(e)
class Printer:
def __init__(self, bot):
self.bot = bot
try:
self.op_client = OctoRest(url="http://192.168.1.158/",
apikey=Config().octopi_api_key)
except ConnectionError as ex:
logGeneric(ex)
@commands.command(name='print',
description="Gets the current printer status",
brief="Is that 3D print done yet?",
pass_context=True)
async def print_status(self, context, rest: str = None):
job_info = self.op_client.job_info()
if rest is None:
if job_info["state"] == "Printing":
floor_percent = int(
(job_info["progress"]["completion"] // 5) * 5)
time_elapsed_nice = str(
datetime.timedelta(
seconds=job_info["progress"]["printTime"]))
if job_info["progress"]["printTimeLeft"] is None:
time_left_nice = "Calculating..."
time_completion = "Waiting for estimate..."
else:
time_left_nice = str(
datetime.timedelta(
seconds=job_info["progress"]["printTimeLeft"]))
time_completion = self.add_secs(
datetime.datetime.now().time(), job_info["progress"]
["printTimeLeft"]).strftime("%I:%M %p")
embed = Embed(title="Athol's 3D Printer",
description="Printer is currently: Printing",
color=0x0080ff)
embed.add_field(
name="Progress",
value="[{}{}](https://github.com/james2hey/Milk) ({:.1f}%)"
.format("■" * (floor_percent // 5),
"□" * ((100 - floor_percent) // 5),
job_info["progress"]["completion"]),
inline=True)
embed.add_field(name="File",
value=job_info["job"]["file"]["name"].replace(
".gcode", ""),
inline=False)
embed.add_field(name="Time Elapsed",
value=time_elapsed_nice,
inline=True)
embed.add_field(name="Estimated Time Left",
value=time_left_nice,
inline=True)
embed.add_field(name="Estimated Completion Time",
value=time_completion,
inline=True)
await self.bot.send_message(context.message.channel,
embed=embed)
else:
embed = Embed(title="Athol's 3D Printer",
description="Printer is currently: {}".format(
job_info["state"]),
color=0x0080ff)
embed.add_field(name="State",
value="{}".format(job_info["state"]))
await self.bot.send_message(context.message.channel,
embed=embed)
else:
if rest.lower() == "pause":
if context.message.author.id == '311429319505346560':
err_message = None
try:
paused = self.op_client.pause()
except RuntimeError as e:
err_message = "{}".format(e).split("OK:")[1].split(
",")[0].strip()
if err_message:
await self.bot.send_message(
context.message.channel,
"Error: {}".format(err_message))
else:
await self.bot.send_message(context.message.channel,
"Printer paused")
else:
scones = await self.bot.get_user_info('311429319505346560')
await self.bot.send_message(
context.message.channel,
"Only {} can do that, sorry".format(scones.mention))
elif rest.lower() == "pic":
if context.message.author.id == '311429319505346560':
self.getImage()
await self.bot.send_file(context.message.channel,
'temp/snapshot.jpg')
else:
scones = await self.bot.get_user_info('311429319505346560')
await self.bot.send_message(
context.message.channel,
"Only {} can do that, sorry".format(scones.mention))
@staticmethod
def add_secs(tm, secs):
fulldate = datetime.datetime(100, 1, 1, tm.hour, tm.minute, tm.second)
fulldate = fulldate + datetime.timedelta(seconds=secs)
return fulldate.time()
@staticmethod
def getImage():
img_data = requests.get(
"http://192.168.1.158/webcam/?action=snapshot").content
with open('temp/snapshot.jpg', 'wb') as handler:
handler.write(img_data)
class Printer(models.Model):
url = models.CharField(max_length=120)
apikey = models.CharField(max_length=120)
name = models.CharField(max_length=120)
IDa = models.CharField(max_length=120)
urlCam = models.CharField(max_length=120)
client = None
def connect(self):
#print("conect")
try:
self.client = OctoRest(url=self.url, apikey=self.apikey)
except ConnectionError as ex:
print("..............Connect error.....................")
print(ex)
def waitConnection(self):
counter = 0
if(self.getPrinterPowerStatus() == "printer_power_status_off"):
return False
else:
self.connect()
while(self.client.connection_info()["current"]["state"] != "Operational" and counter < 40):
self.client.connect(baudrate=115200)
counter = counter + 1
print("conecting..." + self.client.connection_info()["current"]["state"] + str(counter))
if counter >= 40:
return False
else:
return True
def home(self, axes):
if self.client == None:
self.connect()
return self.client.home(axes)
def extrude(self):
if self.client == None:
self.connect()
return self.client.extrude(25)
def retract(self):
if self.client == None:
self.connect()
return self.client.extrude(-25)
def setToolTemp(self, t):
if self.client == None:
self.connect()
return self.client.tool_target(t)
def getToolTemp(self):
if self.client == None:
self.connect()
try:
if self.client.tool() == {}:
return {'actual': 0, 'offset': 0, 'target': 0.0}
else:
return self.client.tool()["tool0"]
except:
return None
def setBedTemp(self, t):
if self.client == None:
self.connect()
return self.client.bed_target(t)
def getBedTemp(self):
if self.client == None:
self.connect()
try:
if self.client.bed() == {}:
return {'actual': 0, 'offset': 0, 'target': 0.0}
else:
return self.client.bed()["bed"]
except:
return None
def getName(self):
return self.name
def getId(self):
return self.IDa
def getUrl(self):
return self.url
def getApiKey(self):
return self.apikey
def getUrlCam(self):
return self.urlCam
def toggleLed(self):
myobj = {'pin': 'r1', 'command': 'update'}
url = self.url + "api/plugin/octorelay?apikey=" + self.apikey
return requests.post(url, json=myobj)
def getLedStatus(self):
myobj = {'pin': 'r1', 'command': 'getStatus'}
url = self.url + "api/plugin/octorelay?apikey=" + self.apikey
x = requests.post(url, json=myobj)
dic = json.loads(x.text)
return dic['status']
def getPrinterPowerStatus(self):
myobj = {'command': 'getPSUState'}
url = self.url + "api/plugin/psucontrol?apikey=" + self.apikey
x = requests.post(url, json=myobj)
dic = json.loads(x.text)
print(dic)
if dic['isPSUOn'] == False:
return "printer_power_status_off"
elif dic['isPSUOn'] == True:
return "printer_power_status_on"
def PrinterPowerOn(self):
myobj = {'command': "turnPSUOn"}
url = self.url + "api/plugin/psucontrol?apikey=" + self.apikey
return requests.post(url, json=myobj)
def printerPowerOFf(self):
myobj = {'command': "turnPSUOff"}
url = self.url + "api/plugin/psucontrol?apikey=" + self.apikey
return requests.post(url, json=myobj)
def getPrinterInfo(self):
if self.client == None:
self.connect()
try:
info = self.client.job_info();
#print(info)
return info
except Exception as e:
print(e)
def getError(self):
URL = self.TSDurl + "accounts/login/"
client = requests.session()
errorTSD = False
try:
client.get(URL, timeout=3) # sets cookie
except:
errorTSD = True
if(errorTSD):
print("TSDERROR TIMEOPUT")
return "TSDerror"
else:
csrftoken = client.cookies['csrftoken']
post_data = { "csrfmiddlewaretoken": csrftoken, 'login': self.TSDuser, 'password': self.TSDpass}
headers = {'Referer': URL}
response = client.post(URL, data=post_data, headers=headers)
a = client.get( self.TSDurl + "api/v1/printers/" + self.TSDid )
client = None
data = json.loads(a.text)
try:
return data["normalized_p"]
except:
return "TSDERROR"
def getAllFilesAndFolders(self):
r = requests.get(self.url + "api/files?apikey=" + self.apikey + "&recursive=true")
print(self.url + "api/files?apikey=" + self.apikey + "&recursive=true")
return r.text
def getStatus(self):
#r = requests.get(self.url[:-1]+":7125/server/info")
return None
def selectFile(self, filePath):
path = "local/" + filePath.replace("@","/")
path = "local/" + filePath.replace("*","/")
if(self.client == None):
self.connect()
path = path.replace("@","/")
path = path.replace(" ","_")
print(path)
self.client.select(path)
return "done"
def deleteFile(self, filePath):
path = "local/" + filePath.replace("@","/")
if(self.client == None):
self.connect()
r = requests.delete(self.url + "api/files/" + path + "?apikey=" + self.apikey )
return r.text
def createFolder(self, folderPath):
if(self.client == None):
self.connect()
path = folderPath.replace("@","/")
data = {'foldername': path}
return requests.post(self.url + "api/files/local" + "?apikey=" + self.apikey, data = data)
def uploadFile(self, filePath, myfile):
if(self.client == None):
self.connect()
path = filePath.replace("@","/")
if(path != "local"):
dataForm = {'path': path}
else:
dataForm = {'path': ""}
dataFile = {'file': myfile}
return requests.post(self.url + "api/files/local" + "?apikey=" + self.apikey, data = dataForm, files = dataFile)
def printSelectedFile(self):
if(self.client == None):
self.connect()
return self.client.start()
def print(self, filePath):
if(self.client == None):
self.connect()
self.selectFile(filePath)
return self.client.start()
def toggle(self):
if(self.client == None):
self.connect()
return self.client.toggle()
def cancel(self):
if(self.client == None):
self.connect()
return self.client.cancel()
def jog(self, x, y, z):
if(self.client == None):
self.connect()
self.client.jog(x, y, z)
return "done"
def moveFile(self, name, path):
name = name.replace("@","/")
path = path.replace("@","/")
if(self.client == None):
self.connect()
return self.client.move(name, path)
return self.client.move(name, path)
class Printer:
def __init__(self, url, apikey):
try:
self.client = OctoRest(url=url, apikey=apikey)
except ConnectionError as ex:
# Handle exception as you wish
print(ex)
def get_printer_info(self):
try:
message = ""
message += str(self.client.version) + "\n"
message += str(self.client.job_info()) + "\n"
printing = self.client.printer()['state']['flags']['printing']
if printing:
message += "Currently printing!\n"
else:
message += "Not currently printing...\n"
return message
except Exception as e:
print(e)
def home(self):
self.client.connect()
self.client.home()
def setExtruderTemp(self, how):
self.client.tool_target(how)
def getExtruderTemp(self):
dic = self.client.tool()
print(self.client.tool()["tool0"])
def test(self):
print(self.client.files_info(location="/"))
def restartKlipper(self):
r = requests.post("http://192.168.0.103:7125/machine/services/restart?service=klipper")
return r.text
def stuff(self):
#r = requests.post('http://192.168.0.103:7125/machine/device_power/on?printer')
print(self.client.select("local/Test_3_big.gcode"))
def waitConnection(self):
counter = 0
self.client.connect(baudrate = 250000)
while(self.client.connection_info()["current"]["state"] != "Paused" and counter < 30):
counter = counter + 1
print("conecting..." + self.client.connection_info()["current"]["state"] + str(counter))
self.client.users
if counter >= 30:
print("conection error")
return False
else:
return True
def disableMotors(self):
self.client.system_commands
return True