def test_get_pos_first_tile(self):
"""Test that the position of the first tile is calculated correctly for a varying number of fields."""
res_x, res_y = self.multibeam.resolution.value # single field size
px_size_x, px_size_y = self.multibeam.pixelSize.value
# Loop over different ROA sizes by varying the number of fields in x and y.
for x_fields, y_fields in zip((1, 2, 40, 34, 5), (1, 22, 43, 104, 25)):
# The coordinates of the ROA in meters.
xmin, ymin, xmax, ymax = (0, 0, res_x * px_size_x * x_fields, res_y * px_size_y * y_fields)
coordinates = (xmin, ymin, xmax, ymax) # in m
# Create an ROA with the coordinates of the field.
roa_name = time.strftime("test_megafield_id-%Y-%m-%d-%H-%M-%S")
roa = fastem.FastEMROA(roa_name, coordinates, None, None,
self.asm, self.multibeam, self.descanner,
self.mppc)
task = fastem.AcquisitionTask(self.scanner, self.multibeam, self.descanner,
self.mppc, self.stage, self.ccd,
self.beamshift, self.lens,
roa, path=None, pre_calibrations=None, future=None)
pos_first_tile_actual = task.get_pos_first_tile()
# The position of the first tile is expected to be to the center position of the top left corner tile
# of the ROA.
pos_first_tile_expected = (xmin + res_x / 2 * px_size_x,
ymax - res_y / 2 * px_size_y)
self.assertEqual(pos_first_tile_actual, pos_first_tile_expected)
def test_pre_calibrate(self):
"""
Test the ASM settings are unchanged after running the pre-calibrations, except the descanner scan offset.
"""
try:
import fastem_calibrations
except ImportError as err:
raise unittest.SkipTest(f"Skipping 'test_pre_calibrate', correct libraries to perform this test are not available.\n"
f"Got the error: {err}")
res_x, res_y = self.multibeam.resolution.value # single field size
px_size_x, px_size_y = self.multibeam.pixelSize.value
x_fields = 5
y_fields = 8
# The coordinates of the ROA in meters.
xmin, ymin, xmax, ymax = (0, 0, res_x * px_size_x * x_fields, res_y * px_size_y * y_fields)
coordinates = (xmin, ymin, xmax, ymax) # in m
# Create an ROA with the coordinates of the field.
roa_name = time.strftime("test_megafield_id-%Y-%m-%d-%H-%M-%S")
roa = fastem.FastEMROA(roa_name, coordinates, None, None,
self.asm, self.multibeam, self.descanner,
self.mppc)
task = fastem.AcquisitionTask(self.scanner, self.multibeam, self.descanner,
self.mppc, self.stage, self.ccd,
self.beamshift, self.lens,
roa, path=None, pre_calibrations=None, future=None)
self.descanner.updateMetadata({model.MD_SCAN_GAIN: (5000, 5000)})
# Set the _pos_first_tile, which would normally be set in the run function.
task._pos_first_tile = task.get_pos_first_tile()
asm_config_orig = configure_hw.get_config_asm(self.multibeam, self.descanner, self.mppc)
pre_calibrations = [Calibrations.OPTICAL_AUTOFOCUS, Calibrations.IMAGE_TRANSLATION_PREALIGN]
task.pre_calibrate(pre_calibrations=pre_calibrations)
asm_config_current = configure_hw.get_config_asm(self.multibeam, self.descanner, self.mppc)
# Verify that all settings, except the descanner scan offset, stay the same after running the pre-calibrations.
for component, settings in asm_config_current.items():
for va, value in settings.items():
if va == 'scanOffset' and component == 'descanner':
# image translation pre-alignment changes the descanner offset, therefore it has changed.
continue
self.assertEqual(asm_config_orig[component][va], value)
def test_stage_pos_outside_roa(self):
"""
The pre-calibrations need to run outside the ROA. Test that get_abs_stage_movement returns the correct value
for a field index of (-1, -1) and that that value is outside the ROA.
"""
res_x, res_y = self.multibeam.resolution.value # single field size
px_size_x, px_size_y = self.multibeam.pixelSize.value
x_fields, y_fields = (3, 4)
field_size_x = res_x * px_size_x
field_size_y = res_y * px_size_y
# The coordinates of the ROA in meters.
xmin, ymin = (0, 0)
xmax, ymax = (field_size_x * x_fields,
field_size_y * y_fields)
coordinates = (xmin, ymin, xmax, ymax) # in m
# Create an ROA with the coordinates of the field.
roa_name = time.strftime("test_megafield_id-%Y-%m-%d-%H-%M-%S")
roa = fastem.FastEMROA(roa_name, coordinates, None, None,
self.asm, self.multibeam, self.descanner,
self.mppc)
task = fastem.AcquisitionTask(self.scanner, self.multibeam, self.descanner,
self.mppc, self.stage, self.ccd,
self.beamshift, self.lens,
roa, path=None, pre_calibrations=None, future=None)
# Set the _pos_first_tile, which would normally be set in the run function.
task._pos_first_tile = task.get_pos_first_tile()
# Verify that for pre-calibrations compared to the top left corner of the ROA, the stage
# position is located half a field to the top left (outside the ROA).
task.field_idx = (-1, -1) # (-1, -1) is the index where the pre-calibrations are performed
# In the role='stage' coordinate system the x-axis points to the right and y-axis to the top.
expected_position = (xmin - res_x / 2 * px_size_x,
ymax + res_x / 2 * px_size_y) # [m]
actual_position = task.get_abs_stage_movement() # [m]
numpy.testing.assert_allclose(actual_position, expected_position)
# Verify that the position where the pre-calibration is performed, does not lie inside the ROA coordinates.
self.assertFalse(is_point_in_rect(actual_position, coordinates))
def test_get_abs_stage_movement_overlap(self):
"""
Test the correct stage positions are returned for the corner fields of
ROAs when there is an overlap in between fields.
"""
res_x, res_y = self.multibeam.resolution.value # single field size
px_size_x, px_size_y = self.multibeam.pixelSize.value
x_fields, y_fields = (3, 4)
field_size_x = res_x * px_size_x
field_size_y = res_y * px_size_y
for overlap in (0, 0.0625, 0.2, 0.5, 0.7):
# The coordinates of the ROA in meters.
xmin, ymin = (0, 0)
# The max field size is the number of fields multiplied with the field size including overlap, plus
# the extra overlap added to the end.
xmax, ymax = (field_size_x * x_fields * (1 - overlap) + field_size_x * overlap,
field_size_y * y_fields * (1 - overlap) + field_size_y * overlap)
coordinates = (xmin, ymin, xmax, ymax) # in m
# Create an ROA with the coordinates of the field.
roa_name = time.strftime("test_megafield_id-%Y-%m-%d-%H-%M-%S")
roa = fastem.FastEMROA(roa_name, coordinates, None, None,
self.asm, self.multibeam, self.descanner,
self.mppc, overlap)
task = fastem.AcquisitionTask(self.scanner, self.multibeam, self.descanner,
self.mppc, self.stage, self.ccd,
self.beamshift, self.lens,
roa, path=None, pre_calibrations=None, future=None)
# Set the _pos_first_tile, which would normally be set in the run function.
task._pos_first_tile = task.get_pos_first_tile()
# Verify that compared to the top left corner of the ROA, the stage
# position is located half a field to the bottom right.
task.field_idx = (0, 0) # (0, 0) is the index of the first field
# In the role='stage' coordinate system the x-axis points to the right and y-axis to the top.
expected_position = (xmin + res_x / 2 * px_size_x,
ymax - res_x / 2 * px_size_y) # [m]
actual_position = task.get_abs_stage_movement() # [m]
numpy.testing.assert_allclose(actual_position, expected_position)
# Verify that compared to the bottom right corner of the ROA, the stage
# position is located half a field to the top left.
task.field_idx = (x_fields - 1, y_fields - 1) # index of the last field
# In the role='stage' coordinate system the x-axis points to the right and y-axis to the top.
expected_position = (xmax - res_x / 2 * px_size_x,
ymin + res_x / 2 * px_size_y) # [m]
actual_position = task.get_abs_stage_movement() # [m]
numpy.testing.assert_allclose(actual_position, expected_position)
# Verify that compared to the top right corner of the ROA, the stage
# position is located half a field to the bottom left.
task.field_idx = (x_fields - 1, 0) # index of the last field in x and first field in y
expected_position = (xmax - res_x / 2 * px_size_x,
ymax - res_x / 2 * px_size_y) # [m]
actual_position = task.get_abs_stage_movement() # [m]
numpy.testing.assert_allclose(actual_position, expected_position)
# Verify that compared to the bottom left corner of the ROA, the stage
# position is located half a field to the top right.
task.field_idx = (0, y_fields - 1) # index of the first field in x and the last field in y
# In the role='stage' coordinate system the x-axis points to the right and y-axis to the top.
expected_position = (xmin + res_x / 2 * px_size_x,
ymin + res_x / 2 * px_size_y) # [m]
actual_position = task.get_abs_stage_movement() # [m]
numpy.testing.assert_allclose(actual_position, expected_position)
def test_get_abs_stage_movement(self):
"""
Test the correct stage positions are returned for the corner fields of
ROAs consisting of a varying number of single fields.
"""
res_x, res_y = self.multibeam.resolution.value # single field size
px_size_x, px_size_y = self.multibeam.pixelSize.value
# Loop over different ROA sizes by varying the number of fields in x and y.
for x_fields, y_fields in zip((1, 2, 40, 34, 5), (1, 22, 43, 104, 25)):
# The coordinates of the ROA in meters.
xmin, ymin, xmax, ymax = (0, 0, res_x * px_size_x * x_fields, res_y * px_size_y * y_fields)
coordinates = (xmin, ymin, xmax, ymax) # in m
# Create an ROA with the coordinates of the field.
roa_name = time.strftime("test_megafield_id-%Y-%m-%d-%H-%M-%S")
roa = fastem.FastEMROA(roa_name, coordinates, None, None,
self.asm, self.multibeam, self.descanner,
self.mppc)
task = fastem.AcquisitionTask(self.scanner, self.multibeam, self.descanner,
self.mppc, self.stage, self.ccd,
self.beamshift, self.lens,
roa, path=None, pre_calibrations=None, future=None)
# Set the _pos_first_tile, which would normally be set in the run function.
task._pos_first_tile = task.get_pos_first_tile()
# Verify that compared to the top left corner of the ROA, the stage
# position is located half a field to the bottom right.
task.field_idx = (0, 0) # (0, 0) is the index of the first field
# In the role='stage' coordinate system the x-axis points to the right and y-axis to the top.
expected_position = (xmin + res_x / 2 * px_size_x,
ymax - res_x / 2 * px_size_y) # [m]
actual_position = task.get_abs_stage_movement() # [m]
actual_position_first_tile = task.get_pos_first_tile() # [m]
numpy.testing.assert_allclose(actual_position, expected_position)
numpy.testing.assert_allclose(actual_position, actual_position_first_tile)
# Verify that compared to the bottom right corner of the ROA, the stage
# position is located half a field to the top left.
task.field_idx = (x_fields - 1, y_fields - 1) # index of the last field
# In the role='stage' coordinate system the x-axis points to the right and y-axis to the top.
expected_position = (xmax - res_x / 2 * px_size_x,
ymin + res_x / 2 * px_size_y) # [m]
actual_position = task.get_abs_stage_movement() # [m]
numpy.testing.assert_allclose(actual_position, expected_position)
# Verify that compared to the top right corner of the ROA, the stage
# position is located half a field to the bottom left.
task.field_idx = (x_fields - 1, 0) # index of the last field in x and first field in y
expected_position = (xmax - res_x / 2 * px_size_x,
ymax - res_x / 2 * px_size_y) # [m]
actual_position = task.get_abs_stage_movement() # [m]
numpy.testing.assert_allclose(actual_position, expected_position)
# Verify that compared to the bottom left corner of the ROA, the stage
# position is located half a field to the top right.
task.field_idx = (0, y_fields - 1) # index of the first field in x and the last field in y
# In the role='stage' coordinate system the x-axis points to the right and y-axis to the top.
expected_position = (xmin + res_x / 2 * px_size_x,
ymin + res_x / 2 * px_size_y) # [m]
actual_position = task.get_abs_stage_movement() # [m]
numpy.testing.assert_allclose(actual_position, expected_position)
