def test_linux_version(self):
if os.sys.platform.startswith('linux'):
v = get_linux_version()
self.assertGreaterEqual(v[0], 2)
self.assertEqual(len(v), 3)
else:
with self.assertRaises(LookupError):
v = get_linux_version()
def test_linux_version(self):
if sys.platform.startswith('linux'):
v = get_linux_version()
self.assertGreaterEqual(v[0], 2)
self.assertEqual(len(v), 3)
else:
with self.assertRaises(LookupError):
v = get_linux_version()
def __init__(self, name, role, device, channels, spectra, pwr_curve,
**kwargs):
"""
device (string): name of the /dev comedi device (ex: "/dev/comedi0")
channels (list of (0<=int)): The output channel for each source, as
numbered in the comedi subdevice.
spectra (list of 5-tuple of float): the spectra for each output channel used.
Each tuple represents the wavelength in m for the 99% low, 25% low,
centre/max, 25% high, 99% high. They do no have to be extremely precise.
The most important is the centre, and that they are all increasing values.
pwr_curve (list of dict (float -> 0<float)): Power curve segment map for
each source. A segment map is a series of voltage output on the
analog output -> emission power of the light (W).
It represents a series of linear segments to map the voltage output
to the light emission. At least one pair should be provided.
If no voltage is linked to 0W, then a 0V -> 0W mapping is used.
The total curve should be monotonic.
"""
# TODO: allow to give the unit of the power/pwr_curve ?
model.Emitter.__init__(self, name, role, **kwargs)
self._shape = ()
try:
self._device = comedi.open(device)
# self._fileno = comedi.fileno(self._device)
except comedi.ComediError:
raise ValueError("Failed to open DAQ device '%s'" % device)
# Look for the analog output subdevice
try:
self._ao_subd = comedi.find_subdevice_by_type(
self._device, comedi.SUBD_AO, 0)
nchan = comedi.get_n_channels(self._device, self._ao_subd)
if nchan < max(channels):
raise ValueError(
"Device only has %d channels, while needed %d" %
(nchan, max(channels)))
except comedi.ComediError:
raise ValueError(
"Failed to find an analogue output on DAQ device '%s'" %
device)
if len(channels) != len(spectra):
raise ValueError(
"spectra argument should have the same length as channels (%d)"
% len(channels))
if len(channels) != len(pwr_curve):
raise ValueError(
"pwr_curve argument should have the same length as channels (%d)"
% len(channels))
self._channels = channels
# Check and store the power curves
self._ranges = []
self._pwr_curve = []
for c, crv in zip(channels, pwr_curve):
crv = [v for v in crv.items()]
# Add 0W = 0V if nothing = 0W
if 0 not in [w for v, w in crv]:
crv.append((0, 0))
logging.info(
"Adding 0V -> 0W mapping to pwr_curve for channel %d", c)
# At least beginning and end values
if len(crv) < 2:
raise ValueError(
"pwr_curve for channel %d has less than 2 values: %s" %
(c, crv))
# Check it's monotonic
crv = sorted(crv, key=lambda v: v[0])
if crv[0][1] < 0:
raise ValueError(
"pwr_curve for channel %d has negative power: %g W" %
(c, crv[0][1]))
if len(crv) != len(set(v for v, w in crv)):
raise ValueError(
"pwr_curve for channel %d has identical voltages: %s" %
(c, crv))
if not all(
(crv[i][1] < crv[i + 1][1]) for i in range(len(crv) - 1)):
raise ValueError(
"pwr_curve for channel %d is not monotonic: %s" % (c, crv))
self._pwr_curve.append(crv)
# Find the best range to use
try:
ri = comedi.find_range(self._device, self._ao_subd, c,
comedi.UNIT_volt, crv[0][0], crv[-1][0])
except comedi.ComediError:
raise ValueError(
"Data range between %g and %g V is too high for hardware."
% (crv[0][0], crv[-1][0]))
self._ranges.append(ri)
# Check the spectra
spect = [] # list of the 5 wavelength points
for c, wls in zip(channels, spectra):
if len(wls) != 5:
raise ValueError(
"Spectra for channel %d doesn't have exactly 5 wavelength points: %s"
% (c, wls))
if list(wls) != sorted(wls):
raise ValueError(
"Spectra for channel %d has unsorted wavelengths: %s" %
(c, wls))
for wl in wls:
if not 0 < wl < 100e-6:
raise ValueError(
"Spectra for channel %d has unexpected wavelength = %f nm"
% (c, wl * 1e9))
spect.append(tuple(wls))
# Maximum power for channel to be used as a range for power
max_power = tuple([crv[-1][1] for crv in self._pwr_curve])
# Power value for each channel of the device
self.power = model.ListContinuous(
value=[0.] * len(self._channels),
range=(
tuple([0.] * len(self._channels)),
max_power,
),
unit="W",
cls=(int, long, float),
)
self.power.subscribe(self._updatePower)
# info on which channel is which wavelength
self.spectra = model.ListVA(spect, unit="m", readonly=True)
# make sure everything is off (turning on the HUB will turn on the lights)
self.power.value = self.power.range[0]
self._metadata = {model.MD_HW_NAME: self.getHwName()}
lnx_ver = driver.get_linux_version()
self._swVersion = "%s (driver %s, linux %s)" % (
odemis.__version__, self.getSwVersion(), ".".join(
"%s" % v for v in lnx_ver))
self._metadata[model.MD_SW_VERSION] = self._swVersion
self._metadata[model.MD_HW_VERSION] = self._hwVersion # unknown
def __init__(self, name, role, device, channels, spectra, pwr_curve, **kwargs):
"""
device (string): name of the /dev comedi device (ex: "/dev/comedi0")
channels (list of (0<=int)): The output channel for each source, as
numbered in the comedi subdevice.
spectra (list of 5-tuple of float): the spectra for each output channel used.
Each tuple represents the wavelength in m for the 99% low, 25% low,
centre/max, 25% high, 99% high. They do no have to be extremely precise.
The most important is the centre, and that they are all increasing values.
pwr_curve (list of dict (float -> 0<float)): Power curve segment map for
each source. A segment map is a series of voltage output on the
analog output -> emission power of the light (W).
It represents a series of linear segments to map the voltage output
to the light emission. At least one pair should be provided.
If no voltage is linked to 0W, then a 0V -> 0W mapping is used.
The total curve should be monotonic.
"""
# TODO: allow to give the unit of the power/pwr_curve ?
model.Emitter.__init__(self, name, role, **kwargs)
self._shape = ()
try:
self._device = comedi.open(device)
# self._fileno = comedi.fileno(self._device)
except comedi.ComediError:
raise ValueError("Failed to open DAQ device '%s'" % device)
# Look for the analog output subdevice
try:
self._ao_subd = comedi.find_subdevice_by_type(self._device, comedi.SUBD_AO, 0)
nchan = comedi.get_n_channels(self._device, self._ao_subd)
if nchan < max(channels):
raise ValueError("Device only has %d channels, while needed %d" % (nchan, max(channels)))
except comedi.ComediError:
raise ValueError("Failed to find an analogue output on DAQ device '%s'" % device)
if len(channels) != len(spectra):
raise ValueError("spectra argument should have the same length as channels (%d)" % len(channels))
if len(channels) != len(pwr_curve):
raise ValueError("pwr_curve argument should have the same length as channels (%d)" % len(channels))
self._channels = channels
# Check and store the power curves
self._ranges = []
self._pwr_curve = []
for c, crv in zip(channels, pwr_curve):
crv = [v for v in crv.items()]
# Add 0W = 0V if nothing = 0W
if 0 not in [w for v, w in crv]:
crv.append((0, 0))
logging.info("Adding 0V -> 0W mapping to pwr_curve for channel %d", c)
# At least beginning and end values
if len(crv) < 2:
raise ValueError("pwr_curve for channel %d has less than 2 values: %s" % (c, crv))
# Check it's monotonic
crv = sorted(crv, key=lambda v: v[0])
if crv[0][1] < 0:
raise ValueError("pwr_curve for channel %d has negative power: %g W" % (c, crv[0][1]))
if len(crv) != len(set(v for v, w in crv)):
raise ValueError("pwr_curve for channel %d has identical voltages: %s" % (c, crv))
if not all((crv[i][1] < crv[i + 1][1]) for i in range(len(crv) - 1)):
raise ValueError("pwr_curve for channel %d is not monotonic: %s" % (c, crv))
self._pwr_curve.append(crv)
# Find the best range to use
try:
ri = comedi.find_range(self._device, self._ao_subd,
c, comedi.UNIT_volt, crv[0][0], crv[-1][0])
except comedi.ComediError:
raise ValueError("Data range between %g and %g V is too high for hardware." %
(crv[0][0], crv[-1][0]))
self._ranges.append(ri)
# Check the spectra
spect = [] # list of the 5 wavelength points
for c, wls in zip(channels, spectra):
if len(wls) != 5:
raise ValueError("Spectra for channel %d doesn't have exactly 5 wavelength points: %s" % (c, wls))
if list(wls) != sorted(wls):
raise ValueError("Spectra for channel %d has unsorted wavelengths: %s" % (c, wls))
for wl in wls:
if not 0 < wl < 100e-6:
raise ValueError("Spectra for channel %d has unexpected wavelength = %f nm"
% (c, wl * 1e9))
spect.append(tuple(wls))
max_power = max(crv[-1][1] for crv in self._pwr_curve)
# power of the whole device (=> max power of the device with max power)
self.power = model.FloatContinuous(0., (0., max_power), unit="W")
self.power.subscribe(self._updatePower)
# ratio of power per channel
# => if some channel don't support max power, clamped before 1
self.emissions = model.ListVA([0.] * len(self._channels), unit="",
setter=self._setEmissions)
# info on which channel is which wavelength
self.spectra = model.ListVA(spect, unit="m", readonly=True)
# make sure everything is off (turning on the HUB will turn on the lights)
self._updateIntensities(self.power.value, self.emissions.value)
self._metadata = {model.MD_HW_NAME: self.getHwName()}
lnx_ver = driver.get_linux_version()
self._swVersion = "%s (driver %s, linux %s)" % (odemis.__version__,
self.getSwVersion(),
".".join("%s" % v for v in lnx_ver))
self._metadata[model.MD_SW_VERSION] = self._swVersion
self._metadata[model.MD_HW_VERSION] = self._hwVersion # unknown