def on_interface_assign(self, button):
menuitem=OOF.Material.Interface.Assign
params = filter(lambda x: x.name != 'material', menuitem.params)
materialname = self.currentMaterialName()
if parameterwidgets.getParameters(
title="Assign material %s to an interface" % materialname, *params):
menuitem.callWithDefaults(material=materialname)
def save_skeletonCB(self, button):
menuitem = mainmenu.OOF.File.Save.Skeleton
skelname = self.skelwidget.get_value()
params = filter(lambda x: x.name!="skeleton", menuitem.params)
if parameterwidgets.getParameters(title='Save Skeleton "%s"' % skelname,
*params):
menuitem.callWithDefaults(skeleton=skelname)
def copyeqstateCB(self, gtkobj): # Button callback
menuitem = subpmenu.Copy_Equation_State
targetparam = menuitem.get_arg("target")
targetparam.set(self.currentFullSubProblemName())
if parameterwidgets.getParameters(targetparam,
title="Select a target subproblem"):
menuitem.callWithDefaults(source=self.currentFullSubProblemName())
def fakeFileSelector(mode, ident=None, title=None, filename=None, params=None):
nameparam = parameter.StringParameter('filename')
parameters = [nameparam]
if params:
parameters.extend(params)
if parameterwidgets.getParameters(title='Fake FileSelector', *parameters):
return nameparam.value
def newCB(self, *args): # gtk callback
menuitem = meshmenu.csmenu.New
if parameterwidgets.getParameters(menuitem.get_arg("name"),
menuitem.get_arg("cross_section"),
title="New cross section",
scope=self.scope):
menuitem.callWithDefaults(mesh=self.meshwidget.get_value())
def copyCB(self, button):
menuitem = mainmenu.OOF.Image.Copy
nameparam = menuitem.get_arg('name')
msparam = menuitem.get_arg('microstructure')
if parameterwidgets.getParameters(msparam, nameparam,
title="Copy Image"):
menuitem.callWithDefaults(image=self.imagewidget.get_value())
def autoCB(self, gtkobj): # gtk callback for "Auto..." button
paramset = filter(lambda x: x.name!='microstructure',
skeletonmenu.Auto.params)
if parameterwidgets.getParameters(title='Automatic skeleton',
*paramset):
skeletonmenu.Auto.callWithDefaults(
microstructure=self.currentMSName())
def newBoundaryCB(self, gtkobj): # button callback
menuitem = boundarymenu.boundarymenu.Construct
nameparam = menuitem.get_arg('name')
builderparam = menuitem.get_arg('constructor')
if parameterwidgets.getParameters(
nameparam, builderparam, title="New Boundary",scope=self):
menuitem.callWithDefaults(skeleton=self.skelwidget.get_value())
def modifyBoundaryCB(self, *args): # button callback
# The parameter widget needs to know what types of modifiers to
# present -- this can be passed through via the "parameter",
# which should have its ".modifiertype" attribute set to the
# same as the current boundary object.
menuitem = boundarymenu.boundarymenu.Modify
modparam = menuitem.get_arg('modifier')
skelctxt = skeletoncontext.skeletonContexts[
self.skelwidget.get_value()]
bdyobj = skelctxt.getBoundary(self.boundarylist.get_value())
# Hang the extra data we need on the parameter dialog box --
# it's a widgetscope, so the enclosed widgets can navigate to
# it easily, and it has the same lifetime as the data in
# question. The price of this is that we have to do the
# dialog operations ourselves.
dialog_extra = {'modifiertype' : bdyobj.modifiertype,
'boundaryname' : self.boundarylist.get_value() }
if parameterwidgets.getParameters(
modparam, title="Boundary modifier", scope=self,
dialog_data=dialog_extra):
menuitem.callWithDefaults(skeleton=self.skelwidget.get_value(),
boundary=self.boundarylist.get_value())
def deleteCB(self, gtkobj):
menuitem = meshbdymenu.bdyanalysismenu.Delete
if parameterwidgets.getParameters(
menuitem.get_arg('name'),
title='Delete a named boundary analysis',
scope=self):
menuitem.callWithDefaults()
def savenamedCB(self, gtkobj):
menuitem = meshbdymenu.bdyanalysismenu.SaveAnalysisDefs
if parameterwidgets.getParameters(
title="Save Boundary Analysis Definitions",
ident="SaveAnalysis",
*menuitem.params):
menuitem.callWithDefaults()
def on_assignment(self, button): # gtk callback
menuitem = OOF.Material.Assign
params = filter(lambda x: x.name != 'material', menuitem.params)
materialname = self.currentMaterialName()
if parameterwidgets.getParameters(
title="Assign material %s to %ss" % (materialname,pixstring), *params):
menuitem.callWithDefaults(material=materialname)
def editCB(self, *args): # gtk callback
menuitem = meshmenu.csmenu.Edit
csname = self.chooser.get_value()
csparam = menuitem.get_arg('cross_section')
csparam.value = self.meshobj.getCrossSection(csname)
if parameterwidgets.getParameters(menuitem.get_arg('cross_section'),
title="Edit cross section " + csname):
menuitem.callWithDefaults(mesh=self.meshobj.path(), name=csname)
def subprobRenameCB(self, gtkobj):
menuitem = mainmenu.OOF.Subproblem.Rename
namearg = menuitem.get_arg('name')
cursubprob = self.currentFullSubProblemName()
namearg.value = labeltree.makePath(cursubprob)[-1]
if parameterwidgets.getParameters(
namearg, title="Rename subproblem " + namearg.value):
menuitem.callWithDefaults(subproblem=cursubprob)
def saveCB(self, *args):
menuitem = mainmenu.OOF.File.Save.Mesh
meshname = self.meshwidget.get_value()
params = filter(lambda x: x.name!="mesh", menuitem.params)
if parameterwidgets.getParameters(ident='SaveMeshFromPage',
title='Save Mesh "%s"' % meshname,
*params):
menuitem.callWithDefaults(mesh=meshname)
def renameCB(self, *args): # gtk button callback
menuitem = meshmenu.Rename
namearg = menuitem.get_arg('name')
curmeshpath = self.currentFullMeshName()
namearg.value = labeltree.makePath(curmeshpath)[-1]
if parameterwidgets.getParameters(namearg,
title='Rename mesh '+namearg.value):
menuitem.callWithDefaults(mesh=curmeshpath)
def copyCB(self, *args):
menuitem = meshmenu.csmenu.Copy
csname = self.chooser.get_value()
if parameterwidgets.getParameters(menuitem.get_arg('mesh'),
menuitem.get_arg('name'),
title="Copy cross section " + csname):
menuitem.callWithDefaults(current=self.meshobj.path(),
cross_section=csname)
def on_copy_property(self, button): # gtk callback
menuitem = OOF.Property.Copy
newnameparam = menuitem.get_arg('new_name')
if parameterwidgets.getParameters(
newnameparam,
title='Copy property ' + self.current_property[0]):
if newnameparam.nontrivial():
menuitem.callWithDefaults(property=self.current_property[0])
def copyinitCB(self, button): # gtk callback, copy field initializers
menuitem = meshmenu.Copy_Field_Initializers
targetparam = menuitem.get_arg("target")
targetparam.set(self.currentFullMeshName())
if parameterwidgets.getParameters(targetparam,
parentwindow=guitop.top().gtk,
title="Select a target Mesh"):
menuitem.callWithDefaults(source=self.currentFullMeshName())
def copyfstateCB(self, gtkobj): # Button callback.
menuitem = subpmenu.Copy_Field_State
targetparam = menuitem.get_arg("target")
targetparam.set(self.currentFullSubProblemName())
if parameterwidgets.getParameters(targetparam,
title="Select a target Subproblem"):
menuitem.callWithDefaults(source=self.currentFullSubProblemName())
def renameMSCB(self, button):
menuitem = mainmenu.OOF.Microstructure.Rename
namearg = menuitem.get_arg('name')
namearg.value = self.currentMSName()
if parameterwidgets.getParameters(
namearg,
title='Rename Microstructure '+self.currentMSName()):
menuitem.callWithDefaults(microstructure=self.currentMSName())
def copyGroupButtonCB(self, button):
menuitem = mainmenu.OOF.PixelGroup.Copy
nameparam = menuitem.get_arg('name')
if parameterwidgets.getParameters(
nameparam,
title='Copy group '+self.currentGroup().name()):
menuitem.callWithDefaults(microstructure=self.currentMSName(),
group=self.currentGroupName())
def copySolverCB(self, *args): # gtk callback
menuitem = subpmenu.Copy_Solver
targetparam = menuitem.get_arg("target")
targetparam.set(self.currentFullSubProblemName())
if parameterwidgets.getParameters(
targetparam,
title="Copy a Solver to a Subproblem"):
menuitem.callWithDefaults(source=self.currentFullSubProblemName())
def copyinitCB(self, button): # gtk callback, copy field initializer
menuitem = meshmenu.Copy_Field_Initializers
targetparam = menuitem.get_arg("target")
targetparam.set(self.currentFullMeshName())
if parameterwidgets.getParameters(targetparam,
parentwindow=guitop.top().gtk,
title="Select a target Mesh"):
menuitem.callWithDefaults(source=self.currentFullMeshName())
def copyAllSolversCB(self, *args):
menuitem = meshmenu.Copy_All_Solvers
targetparam = menuitem.get_arg("target")
targetparam.set(self.currentFullMeshName())
if parameterwidgets.getParameters(
targetparam,
title="Copy all Solvers to a Mesh"):
menuitem.callWithDefaults(source=self.currentFullMeshName())
def createCB(self, gtkobj): # create a named analysis
menuitem = meshbdymenu.bdyanalysismenu.Create
if parameterwidgets.getParameters(menuitem.get_arg('name'),
title='Name an analysis operation',
scope=self):
menuitem.callWithDefaults(
boundary=self.bdylist.get_value(),
analyzer=self.analysisWidget.get_value())
def newGroupCB(self, gtkobj):
skelpath = self.parent.getCurrentSkeletonName()
menuitem = self.activemode().getGroupMenu().New_Group
group_param = menuitem.get_arg('name')
if parameterwidgets.getParameters(
group_param,
title='Create a new %s group' % self.activemode().name()):
menuitem.callWithDefaults(skeleton=skelpath)
def addMaterialCB(self, gtkobj):
skelpath = self.parent.getCurrentSkeletonName()
current_group = self.grouplist.get_value()
menuitem = self.activemode().getGroupMenu().Assign_Material
if parameterwidgets.getParameters(
menuitem.get_arg('material'),
title="Assign a material to a %s group" % self.activemode().name()):
menuitem.callWithDefaults(skeleton=skelpath, group=current_group)
def renameGroupButtonCB(self, button):
menuitem = mainmenu.OOF.PixelGroup.Rename
nameparam = menuitem.get_arg('new_name')
nameparam.value = self.currentGroupName()
if parameterwidgets.getParameters(nameparam,
title='Rename %sgroup ' % pixstring +
self.currentGroupName()):
menuitem.callWithDefaults(microstructure=self.currentMSName(),
group=self.currentGroupName())
def newOutputCB(self, gtkbutton):
# Create a new scheduled output
menuitem = outputmenu.New
params = filter(lambda a: a.name != 'mesh', menuitem.params)
if parameterwidgets.getParameters(title='Define a new Output',
scope=self,
parentwindow=guitop.top().gtk,
*params):
menuitem.callWithDefaults(mesh=self.currentFullMeshName())
def copyCB(self, *args): # gtk button callback
menuitem = mainmenu.OOF.Mesh.Copy
nameparam = menuitem.get_arg("name")
fieldparam = menuitem.get_arg("copy_field")
eqnparam = menuitem.get_arg("copy_equation")
bcparam = menuitem.get_arg("copy_bc")
if parameterwidgets.getParameters(nameparam, fieldparam, eqnparam,
bcparam, title='Copy a mesh'):
menuitem.callWithDefaults(mesh=self.currentFullMeshName())
def copyGroupCB(self, gtkobj):
skelpath = self.parent.getCurrentSkeletonName()
current_group = self.grouplist.get_value()
menuitem = self.activemode().getGroupMenu().Copy_Group
new_group_param = menuitem.get_arg('new_name')
if parameterwidgets.getParameters(new_group_param,
title='Copy group %s' %
current_group):
menuitem.callWithDefaults(skeleton=skelpath, group=current_group)
def saveMSCB(self, button):
menuitem = mainmenu.OOF.File.Save.Microstructure
msname = self.currentMSName()
if parameterwidgets.getParameters(menuitem.get_arg('filename'),
menuitem.get_arg('mode'),
menuitem.get_arg('format'),
title="Save Microstructure '%s'" %
msname):
menuitem.callWithDefaults(microstructure=msname)
def newOutputCB(self, gtkbutton):
# Create a new scheduled output
menuitem = outputmenu.New
params = filter(lambda a: a.name != 'mesh', menuitem.params)
if parameterwidgets.getParameters(title='Define a new Output',
scope=self,
parentwindow=guitop.top().gtk,
*params):
menuitem.callWithDefaults(mesh=self.currentFullMeshName())
def bcCopyAll_CB(self, gtkobj):
currentmesh = self.currentFullMeshName()
if currentmesh:
menuitem = boundaryconditionmenu.bcmenu.Copy_All
meshnameparam = menuitem.get_arg("mesh")
if parameterwidgets.getParameters(
meshnameparam,
title="Choose the target mesh.", scope=self):
menuitem.callWithDefaults(current=currentmesh)
def createCB(self, gtkobj): # create a named analysis
menuitem = analyzemenu.namedanalysismenu.Create
if parameterwidgets.getParameters(menuitem.get_arg('name'),
title='Name an analysis operation',
scope=self):
menuitem.callWithDefaults(operation=self.op_obj.get_value(),
data=self.output_obj.get_value(),
domain=self.domain_obj.get_value(),
sampling=self.sample_obj.get_value())
def addMaterialCB(self, gtkobj):
skelpath = self.parent.getCurrentSkeletonName()
current_group = self.grouplist.get_value()
menuitem = self.activemode().getGroupMenu().Assign_Material
if parameterwidgets.getParameters(
menuitem.get_arg('material'),
title="Assign a material to a %s group" %
self.activemode().name()):
menuitem.callWithDefaults(skeleton=skelpath, group=current_group)
def renameCB(self, *args): # gtk button callback
menuitem = meshmenu.Rename
namearg = menuitem.get_arg('name')
curmeshpath = self.currentFullMeshName()
namearg.value = labeltree.makePath(curmeshpath)[-1]
if parameterwidgets.getParameters(namearg,
title='Rename mesh ' +
namearg.value):
menuitem.callWithDefaults(mesh=curmeshpath)
def subprobRenameCB(self, gtkobj):
menuitem = mainmenu.OOF.Subproblem.Rename
namearg = menuitem.get_arg('name')
cursubprob = self.currentFullSubProblemName()
namearg.value = labeltree.makePath(cursubprob)[-1]
if parameterwidgets.getParameters(namearg,
title="Rename subproblem " +
namearg.value):
menuitem.callWithDefaults(subproblem=cursubprob)
def saveMSCB(self, button):
menuitem = mainmenu.OOF.File.Save.Microstructure
msname = self.currentMSName()
if parameterwidgets.getParameters(
menuitem.get_arg('filename'),
menuitem.get_arg('mode'),
menuitem.get_arg('format'),
title="Save Microstructure '%s'" % msname):
menuitem.callWithDefaults(microstructure=msname)
def copyCB(self, *args): # gtk button callback
menuitem = mainmenu.OOF.Mesh.Copy
nameparam = menuitem.get_arg("name")
fieldparam = menuitem.get_arg("copy_field")
eqnparam = menuitem.get_arg("copy_equation")
bcparam = menuitem.get_arg("copy_bc")
if parameterwidgets.getParameters(nameparam, fieldparam, eqnparam,
bcparam, title='Copy a mesh'):
menuitem.callWithDefaults(mesh=self.currentFullMeshName())
def bcCopyAll_CB(self, gtkobj):
currentmesh = self.currentFullMeshName()
if currentmesh:
menuitem = boundaryconditionmenu.bcmenu.Copy_All
meshnameparam = menuitem.get_arg("mesh")
if parameterwidgets.getParameters(meshnameparam,
title="Choose the target mesh.",
scope=self):
menuitem.callWithDefaults(current=currentmesh)
def on_copy(self, button): # gtk callback
oldname = self.currentMaterialName()
if oldname is not None:
menuitem = OOF.Material.Copy
newnameparam = menuitem.get_arg('new_name')
if parameterwidgets.getParameters(
newnameparam, title="Name for the new material."):
if newnameparam.nontrivial():
menuitem.callWithDefaults(name=oldname)
def newBoundaryCB(self, gtkobj): # button callback
menuitem = boundarymenu.boundarymenu.Construct
nameparam = menuitem.get_arg('name')
builderparam = menuitem.get_arg('constructor')
if parameterwidgets.getParameters(nameparam,
builderparam,
title="New Boundary",
scope=self):
menuitem.callWithDefaults(skeleton=self.skelwidget.get_value())
def renameBoundaryCB(self, gtkobj): # button callback
menuitem = boundarymenu.boundarymenu.Rename
newname = menuitem.get_arg('name')
oldname = self.boundarylist.get_value()
newname.set(oldname)
if parameterwidgets.getParameters(newname,
title="New name for this boundary"):
menuitem.callWithDefaults(skeleton=self.skelwidget.get_value(),
boundary=self.boundarylist.get_value())
def editCB(self, *args): # gtk callback
menuitem = meshmenu.csmenu.Edit
csname = self.chooser.get_value()
csparam = menuitem.get_arg('cross_section')
csparam.value = self.meshobj.getCrossSection(csname)
if parameterwidgets.getParameters(menuitem.get_arg('cross_section'),
title="Edit cross section " +
csname):
menuitem.callWithDefaults(mesh=self.meshobj.path(), name=csname)
def copyCB(self, *args):
menuitem = meshmenu.csmenu.Copy
csname = self.chooser.get_value()
if parameterwidgets.getParameters(menuitem.get_arg('mesh'),
menuitem.get_arg('name'),
title="Copy cross section " +
csname):
menuitem.callWithDefaults(current=self.meshobj.path(),
cross_section=csname)
def on_rename(self, button): # gtk callback
oldname = self.currentMaterialName()
if oldname is not None:
menuitem = OOF.Material.Rename
newnameparam = menuitem.get_arg("name")
if parameterwidgets.getParameters(
newnameparam, title="New name for the material."):
if newnameparam.nontrivial():
menuitem.callWithDefaults(material=oldname)
def newdirCB(self, button):
dirnameparam = parameter.StringParameter('directory name')
if parameterwidgets.getParameters(dirnameparam, title="New Directory"):
if dirnameparam.value[0] != os.sep:
dirname = os.path.join(self.cwd(), dirnameparam.value)
else:
dirname = dirnameparam.value
os.mkdir(dirname) # raises exception if file exists
self.dirHistory.push(dirname)
self.switchDir(dirname)
def renameInterfaceCB(self, gtkobj):
menuitem = mainmenu.OOF.Microstructure.Interface.Rename
newname = menuitem.get_arg('name')
oldname = self.interfacelist.get_value()
newname.set(oldname)
if parameterwidgets.getParameters(newname,
title="New name for this interface"):
menuitem.callWithDefaults(
microstructure=self.skelwidget.get_value(depth=1),
interface=self.interfacelist.get_value())
def renameCB(self, button):
menuitem = mainmenu.OOF.ActiveArea.Rename
namearg = menuitem.get_arg('newname')
namearg.value = self.getCurrentActiveArea()
oldname = self.getCurrentActiveArea()
if parameterwidgets.getParameters(menuitem.get_arg('newname'),
title="Rename active%s '%s'"
% (spacestring,oldname)):
menuitem.callWithDefaults(microstructure=self.getCurrentMSName(),
oldname=oldname)
def doubleClickMethodCB(self, method):
menuitem = self.menu.LayerSet.Replace_Method
methodarg = menuitem.get_arg('method')
methodarg.value = method
if parameterwidgets.getParameters(methodarg,
parentwindow=self.gtk,
title=self.methodDialogTitle(),
scope=self):
layernumber = self.methodList.get_index()
menuitem.callWithDefaults(layer_number=layernumber)
def renameCB(self, *args): # gtk callback
menuitem = meshmenu.csmenu.Rename
oldname = self.chooser.get_value()
namearg = menuitem.get_arg('name')
namearg.value = oldname
if parameterwidgets.getParameters(namearg,
title='Rename cross section "%s"' %
oldname):
menuitem.callWithDefaults(mesh=self.meshwidget.get_value(),
cross_section=oldname)
def on_save(self, button): # gtk callback
# Save a single material
menuitem = OOF.File.Save.Materials
materialname = self.currentMaterialName()
params = filter(lambda x: x.name != "materials", menuitem.params)
if parameterwidgets.getParameters(title='Save Material "%s"' %
materialname,
ident='SaveMat',
*params):
menuitem.callWithDefaults(materials=[materialname])
def renameCB(self, gtkbutton):
menuitem = outputmenu.Rename
nameparam = menuitem.get_arg('name')
name = self.currentOutputName()
nameparam.set(name)
if parameterwidgets.getParameters(nameparam,
title='Rename output "%s"' % name,
scope=self,
parentwindow=guitop.top().gtk):
menuitem.callWithDefaults(mesh=self.currentFullMeshName(),
output=self.currentOutputName())
def assignmatCB(self, gtkobj):
menuitem = mainmenu.OOF.Material.Interface.Assign
matparam = menuitem.get_arg('material')
interfacename = self.interfacelist.get_value()
if parameterwidgets.getParameters(
matparam,
title="Assign material to interface %s" % interfacename):
menuitem.callWithDefaults(
microstructure=self.skelwidget.get_value(depth=1),
interfaces=[interfacename],
skeleton=None)
def newInterfaceCB(self, gtkobj):
#self.skelwidget.get_value() returns the skeletonpath,
#e.g. "msname:skelname". Pass depth=1 to get "msname"
msname = self.skelwidget.get_value(depth=1)
menuitem = mainmenu.OOF.Microstructure.Interface.New
params = filter(lambda x: x.name != 'microstructure', menuitem.params)
if parameterwidgets.getParameters(
title="Create interface in microstructure %s" % msname,
scope=self,
*params):
menuitem.callWithDefaults(microstructure=msname)
def _save_prop(menuitem):
global materialspage
propname = materialspage.current_property_name()
if propname:
params = filter(lambda x: x.name != "property", menuitem.params)
if parameterwidgets.getParameters(ident='PropMenu',
title='Save Property',
*params):
menuitem.callWithDefaults(property=propname)
else:
reporter.report("No property selected for saving.")
def bcRename_CB(self, gtkobj):
meshname = self.currentFullMeshName()
bcname = self.bclist.getBCName()
if meshname and bcname:
menuitem = boundaryconditionmenu.bcmenu.Rename
newnameparam = menuitem.get_arg('name')
newnameparam.value = bcname
if parameterwidgets.getParameters(
newnameparam,
title="Rename the boundary condition '%s'" % bcname):
menuitem.callWithDefaults(mesh=meshname, bc=bcname)
def setSolverCB(self, *args): # gtk callback
menuitem = subpmenu.Set_Solver
subp = self.currentSubProblemContext()
mode_arg = menuitem.get_arg('solver_mode')
mode_arg.set(subp.solver_mode)
if parameterwidgets.getParameters(mode_arg,
title='Specify Solver',
parentwindow=guitop.top().gtk,
scope=self):
menuitem.callWithDefaults(
subproblem=self.currentFullSubProblemName())
