def setPose(name, node=None, ns=""):
""" Reads the attributes off all objects in the specified set (name) and sets those as the set values
:param name str: name of the pose to set
:param node str: if specified, only applies the pose on the specified node
"""
if name == 'default': raise NameError("Can't override the default pose!")
setName = ns + names.nodeName(
'set', names.getDescriptor(name), side=names.getSide(name))
if node:
node = node.replace(names.getNS(node), "")
nodes = [ns + node]
else:
nodes = util.objectSet.getSetContents(setName)
for node in nodes:
if not cmds.objExists("{0}.{1}".format(node, name)):
cmds.error("{0} is not part of the pose {1}".format(node, name))
data = json.loads(cmds.getAttr("{0}.{1}".format(node, name)))
for attr in data:
val = cmds.getAttr("{0}.{1}".format(node, attr))
data[attr] = val
prettyData = json.dumps(data,
sort_keys=True,
indent=3,
separators=(',', ': '))
cmds.setAttr("{0}.{1}".format(node, name), prettyData, type="string")
def loadPoses(nameList, path, ns=""):
""" Tries to load all poses in specified location with specfied names
:param nameList list : list of pose names to look for
:param path str: folder to look in
"""
if not os.path.exists(path):
raise NameError("The path '{0}' does not exist!".format(path))
if not cmds.objExists(ns + basePoseSet):
raise ValueError("This scene does not have a base pose set!")
for name in nameList:
setName = ns + names.nodeName(
'set', names.getDescriptor(name), side=names.getSide(name))
if not cmds.objExists(setName):
cmds.sets(setName, add=ns + basePoseSet)
dataPath = os.path.join(path, name + "Pose.json")
data = json.loads(open(dataPath).read())
for node in data:
if not cmds.objExists("{0}.{1}".format(ns + node, name)): continue
newData = {}
for attr in data[node]:
val = data[node][attr]
newData[attr] = val
prettyData = json.dumps(newData,
sort_keys=True,
indent=3,
separators=(',', ': '))
cmds.setAttr("{0}.{1}".format(ns + node, name),
prettyData,
type="string")
def savePoses(nameList, path, ns=""):
""" Saves out all poses in nameList to specified path. Creates a new file per pose
:param nameList list: list of pose names to save out
:param path str: path to save to, should be in the style "/test/path" and cannot be a file
"""
if not os.path.exists(path):
raise NameError("The path '{0}' does not exist!".format(path))
for name in nameList:
setName = names.nodeName('set',
names.getDescriptor(name),
side=names.getSide(name))
nodes = util.objectSet.getSetContents(setName)
data = {}
for node in nodes:
data[node] = {}
if not cmds.objExists("{0}.{1}".format(node, name)):
cmds.error("{0} is not part of the pose {1}".format(
node, name))
poseData = json.loads(cmds.getAttr("{0}.{1}".format(node, name)))
for attr in poseData:
val = cmds.getAttr("{0}.{1}".format(node, attr))
poseData[attr] = val
data[node] = poseData
prettyData = json.dumps(data,
sort_keys=True,
indent=3,
separators=(',', ': '))
# Create a file name
dataPath = os.path.join(path, name + "Pose.json")
if os.path.exists(dataPath):
# os.rename and shutil.move both throws errors, doing it the manual way...
old = json.loads(open(dataPath).read())
f = open(dataPath + "OLD", 'w')
prettyData = json.dumps(old,
sort_keys=True,
indent=3,
separators=(',', ': '))
print >> f, prettyData
f.close()
os.remove(dataPath)
# Save the data to disc. Running json.dumps and printing line by line returns an easily readable json
f = open(dataPath, 'w')
prettyData = json.dumps(data,
sort_keys=True,
indent=3,
separators=(',', ': '))
print >> f, prettyData
f.close()
def createPoses(node, nameList=[], extra=[], ns=""):
""" Creates poses specified in the nameList on specified node.
:param node str: node to add poses to
:param nameList list: list of pose names
:param extra list: appends the attributes specified in this list to the default list of attrs
Example:
from ooutdmaya.rigging.core.util import pose
reload(pose)
if not cmds.objExists('pose_set'): cmds.sets('pose_set')
mySphere = cmds.polySphere(n="test1_geo", ch=0)[0]
cmds.addAttr(mySphere, ln="testAttr", at="float", k=True, dv=10)
pose.createPoses(mySphere, ['default', 'test'], ['testAttr])
"""
if not node: return
if not cmds.objExists(ns + node): return
attrList = [
'tx', 'ty', 'tz', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz', 'v',
'rotateOrder'
]
if extra: attrList = attrList + extra
data = {}
for attr in attrList:
val = cmds.getAttr("{0}.{1}".format(ns + node, attr))
data[attr] = val
prettyData = json.dumps(data,
sort_keys=True,
indent=3,
separators=(',', ': '))
for name in nameList:
cmds.addAttr(ns + node, ln=name, dt="string", h=False)
cmds.setAttr("{0}.{1}".format(ns + node, name),
prettyData,
type="string")
setName = ns + names.nodeName(
'set', names.getDescriptor(name), side=names.getSide(name))
if cmds.objExists(setName):
cmds.sets(ns + node, add=setName)
else:
newSet = util.lib.createNode('objectSet', name=ns + setName)
cmds.sets(newSet, add=ns + basePoseSet)
cmds.sets(ns + node, add=newSet)
def applyPose(name, node=None, ns=""):
""" Applies the pose specified (name) to all objects in the relevant pose set
:param name str: name of the pose to apply
"""
setName = ns + names.nodeName(
'set', names.getDescriptor(ns + name), side=names.getSide(ns + name))
print setName
if node:
node = node.replace(names.getNS(node), "")
nodes = [ns + node]
else:
nodes = util.objectSet.getSetContents(setName)
for node in nodes:
if not cmds.objExists("{0}.{1}".format(node, name)):
cmds.error("{0} is not part of the pose {1}".format(node, name))
data = json.loads(cmds.getAttr("{0}.{1}".format(node, name)))
for attr in data:
try:
cmds.setAttr("{0}.{1}".format(node, attr), data[attr])
except:
continue
def getSide(*args, **kwargs):
# cmds.warning('ooutdmaya.rigging.core.util.names.getSide now DEPRECIATED... please use\n\tooutdmaya.common.util.names.getSide instead')
return names.getSide(*args, **kwargs)
def buildInterp(self, bias=0.0):
"""Build interpolation joint
Note:
Uses MayaMuscle cSmartConstraint to reliably interpolate a joints rotation between two other joints. Useful
for skinning tweaks in areas where you need a softer bend, or maintain volume. Changing bias defines how the rotation
is interpolated between the parent and target joint.
Aim can be x, y, z, -x, -y, -z
Args:
bias (float): -1 follows parent, 1 follows target
"""
# Prep variables and check for prerequisites
self.side = names.getSide(self.target)
self.descriptor = names.getDescriptor(self.target)
self.basename = "{0}_{1}_{2}".format(self.side, self.descriptor,
"interp")
if self.target == "":
raise ValueError(
"Tried building interpolation joint setup without a target.")
if not cmds.pluginInfo('MayaMuscle', q=1, l=1):
try:
cmds.loadPlugin('MayaMuscle')
except:
raise RuntimeError('Unable to load the MayaMuscle plugin!')
# Setup interp grp
if not cmds.objExists("rigInterp_grp"):
rigInterpGrp = cmds.group(n="rigInterp_grp", em=1, w=1)
if self.parent:
cmds.parent(rigInterpGrp, self.parent)
elif cmds.objExists("misc_grp"):
cmds.parent(rigInterpGrp, "misc_grp")
# Create hierarchy
masterGrp = cmds.group(em=1,
n=names.addModifier(self.basename, 'grp'),
p="rigInterp_grp")
cmds.delete(cmds.parentConstraint(self.target, masterGrp, mo=0))
# Create driver joints
cmds.select(d=1)
cDrv = cmds.joint(
n=names.addModifier(self.basename, 'joint', addSuffix='child'))
cmds.select(d=1)
pDrv = cmds.joint(
n=names.addModifier(self.basename, 'joint', addSuffix='parent'))
cmds.parent(cDrv, pDrv, masterGrp)
# Identify parent joint
pJnt = cmds.listRelatives(self.target, p=1, typ="joint")[0]
# Match dummy joint placements and move rotation to jointOrientation
cmds.delete(cmds.parentConstraint(pJnt, pDrv, mo=0))
cmds.delete(cmds.parentConstraint(self.target, cDrv, mo=0))
cmds.makeIdentity(pDrv, r=1, a=1)
cmds.makeIdentity(cDrv, r=1, a=1)
# Create parent constraints
pParCon = cmds.parentConstraint(pJnt,
pDrv,
mo=0,
n=names.addModifier(
pDrv, 'parentConstraint'))
cParCon = cmds.parentConstraint(self.target,
cDrv,
mo=0,
n=names.addModifier(
cDrv, 'parentConstraint'))
# Create the interpolation joint, add helper group structure.
cmds.select(d=1)
self.intJnt = cmds.joint(n=names.addModifier(self.basename, 'joint'))
intOffGrp = cmds.group(em=1,
w=1,
n=names.addModifier(self.intJnt,
'grp',
addSuffix="offset"))
intConGrp = cmds.group(intOffGrp,
w=1,
n=names.addModifier(self.intJnt,
'grp',
addSuffix="constraint"))
cmds.delete(cmds.parentConstraint(self.intJnt, intConGrp, mo=0))
cmds.xform(intOffGrp, ro=(0, 0, 0), t=(0, 0, 0), a=1, ws=1)
cmds.parent(self.intJnt, intOffGrp)
# Pretty it up a bit
cmds.setAttr("{0}.overrideEnabled".format(self.intJnt), 1)
cmds.setAttr("{0}.radius".format(self.intJnt), 1.5)
cmds.setAttr("{0}.overrideColor".format(self.intJnt), 17)
# Create muscle smart constraint and connect it up
# Note on the cMuscleSmartConstraint:
# It has a build in trigger with the ability to adjust the bias. So, say you want it to follow the shoulder more
# at values above 90 degrees, but want it to interpolate 50/50 for all rotation values under that, you can do it
# by setting a trigger rotation value of 90, and once it hits 90 degrees of rotation, it'll smoothly move bias more
# towards the shoulder rather than the elbow.
smartCon = cmds.createNode("cMuscleSmartConstraint",
n=names.addModifier(
self.basename,
'cMuscleSmartConstraint',
addSuffix='constraint'))
cmds.connectAttr("{0}.worldMatrix".format(pDrv),
"{0}.worldMatrixA".format(smartCon))
cmds.connectAttr("{0}.worldMatrix".format(cDrv),
"{0}.worldMatrixB".format(smartCon))
cmds.connectAttr("{0}.outTranslate".format(smartCon),
"{0}.translate".format(self.intJnt))
cmds.connectAttr("{0}.outRotate".format(smartCon),
"{0}.rotate".format(self.intJnt))
# Set axis based on the aim attribute
axisList = ["x", "y", "z", "-x", "-y", "-z"]
axisSet = 0
for z, i in enumerate(axisList):
if self.aimAxis == i:
cmds.setAttr("{0}.axis".format(smartCon), z)
axisSet = 1
if not axisSet:
cmds.setAttr("{0}.axis".format(smartCon), 0)
# Promote bias attributes etc. to master node for manual adjustments
cmds.addAttr(masterGrp,
ln="customAttributes",
nn="__Custom Attributes__",
k=1)
cmds.setAttr("{0}.customAttributes".format(masterGrp), l=1)
cmds.addAttr(
masterGrp,
ln="axis",
)
cmds.addAttr(masterGrp, ln="trigger", k=1, min=0, max=180)
cmds.addAttr(masterGrp, ln="bias", k=1, min=-1, max=1)
cmds.addAttr(masterGrp, ln="biasAdjust", k=1, min=-2, max=2)
cmds.connectAttr("{0}.trigger".format(masterGrp),
"{0}.triggerMin".format(smartCon))
cmds.connectAttr("{0}.bias".format(masterGrp),
"{0}.bias".format(smartCon))
cmds.connectAttr("{0}.biasAdjust".format(masterGrp),
"{0}.biasAdjust".format(smartCon))
# Clean up
cmds.parent(intConGrp, masterGrp)
cmds.setAttr("{0}.bias".format(masterGrp), bias)
cmds.setAttr("{0}.inheritsTransform".format(masterGrp), 0)
for i in [cDrv, pDrv]:
cmds.setAttr("{0}.v".format(i), 0)
attrList = ["sx", "sy", "sz"]
for attr in attrList:
cmds.setAttr("{0}.{1}".format(self.intJnt, attr), l=1)
def buildTwist(self, reverse=0, noflip=0, stretch=0):
"""Builds a twist joint setup.
Note:
Requires at least 3 joints to build (ie. shoulder - elbow - wrist).
Example:
test = HelperJoints()
test.target = "joint2"
test._buildTwist(noflip=1)
Args:
reverse (bool): Defines whether we're extracting the twist down the chain or up the chain.
In a general sense, for a shoulder, reverse should be 0, for an ankle, reverse should be 1.
noflip (bool): Sets the constraints to noflip mode, allowing 360 degree rotation
stretch (bool): Toggles whether or not the joint length should be continuesly sampled to "stretch"
twist joints along with it whatever it's build inbetween.
"""
# Default args
if self.target == "":
raise ValueError(
"Tried building twist joint setup without a target (self.target)."
)
if self.val == 0:
raise ValueError(
"Tried building twist joint with specified amount (self.val) being 0 (no twist joints)"
)
self.side = names.getSide(self.target)
self.descriptor = names.getDescriptor(self.target)
if self.side:
self.basename = "{0}_{1}_{2}".format(self.side, self.descriptor,
"twist")
else:
self.basename = "{0}_{1}".format(self.descriptor, "twist")
# Setup twist grp
if not cmds.objExists("rigTwist_grp"):
rigTwistGrp = cmds.group(n="rigTwist_grp", em=1, w=1)
if self.parent:
cmds.parent(rigTwistGrp, self.parent)
elif cmds.objExists("misc_grp"):
cmds.parent(rigTwistGrp, "misc_grp")
# Check if matrix nodes are loaded
if not cmds.pluginInfo('matrixNodes', q=1, l=1):
try:
cmds.loadPlugin('matrixNodes')
except:
raise RuntimeError('Unable to load the matrixNodes plugin!')
# Could potentially remove type limitation from this section if needed in the future.
if self.childTarget == "":
self.childTarget = cmds.listRelatives(self.target,
c=1,
typ="joint")[0]
if self.parentTarget == "":
self.parentTarget = cmds.listRelatives(self.target,
p=1,
typ="joint")[0]
if self.jntLen == 0:
lenFound = 0
for i in ["x", "y", "z"]:
if self.aimAxis == i:
self.jntLen = cmds.getAttr("{0}.t{1}".format(
self.target, i))
lenFound = 1
if not lenFound and not self.jntLen:
raise ValueError(
"Joint length was not specified and the length could not be retrieved automatically"
)
masterGrp = cmds.group(n=names.addModifier(self.basename,
'grp',
addSuffix='Master'),
em=1,
p="rigTwist_grp")
cmds.setAttr("{0}.inheritsTransform".format(masterGrp), 0)
# Create dummy setup
dummyTarget = cmds.duplicate(self.target,
po=1,
n=names.addModifier(
self.basename,
'joint',
addSuffix='DummyTarget'))[0]
dummyParent = cmds.duplicate(self.parentTarget,
po=1,
n=names.addModifier(
self.basename,
'joint',
addSuffix='DummyParent'))[0]
dummyChild = cmds.duplicate(self.childTarget,
po=1,
n=names.addModifier(
self.basename,
'joint',
addSuffix='DummyChild'))[0]
cmds.parent(dummyChild, dummyTarget)
cmds.parent(dummyTarget, dummyParent)
cmds.parent(dummyParent, masterGrp)
matchList = [self.target, self.parentTarget, self.childTarget]
for z, i in enumerate([dummyTarget, dummyParent, dummyChild]):
cmds.parentConstraint(matchList[z],
i,
n=names.addModifier(i, 'parentConstraint'),
mo=0)
# Create slave joints
slaveA = cmds.duplicate(dummyTarget,
po=1,
n=names.addModifier(self.basename,
'joint',
addSuffix='SlaveA'))[0]
if reverse:
slaveB = cmds.duplicate(dummyParent,
po=1,
n=names.addModifier(self.basename,
'joint',
addSuffix='SlaveB'))[0]
else:
slaveB = cmds.duplicate(dummyChild,
po=1,
n=names.addModifier(self.basename,
'joint',
addSuffix='SlaveB'))[0]
cmds.parent(slaveB, slaveA)
# Redundant parenting, just to be sure
if not cmds.listRelatives(slaveA, p=1, typ="joint")[0] == dummyParent:
cmds.parent(slaveA, dummyParent)
# Create IK to remove the main axis
rpIK, rpEE = cmds.ikHandle(n=names.addModifier(self.basename,
'ikHandle',
addSuffix='Ext'),
sj=slaveA,
ee=slaveB)
rpEE = cmds.rename(
rpEE,
names.addModifier(self.basename, 'endEffector', addSuffix='Ext'))
cmds.parent(rpIK, dummyTarget)
cmds.setAttr("{0}.poleVectorX".format(rpIK), 0)
cmds.setAttr("{0}.poleVectorY".format(rpIK), 0)
cmds.setAttr("{0}.poleVectorZ".format(rpIK), 0)
# Create space locators that'll help store the current twist value (and visualize for debugging)
twistValA = cmds.spaceLocator(
n=names.addModifier(self.basename, 'locator', addSuffix='A'))[0]
twistValB = cmds.spaceLocator(
n=names.addModifier(self.basename, 'locator', addSuffix='B'))[0]
cmds.parent(twistValA, twistValB, dummyTarget)
attrList = [".tx", ".ty", ".tz", ".rx", ".ry", ".rz"]
for attr in attrList:
cmds.setAttr(twistValA + attr, 0)
cmds.setAttr(twistValB + attr, 0)
valAOri = cmds.orientConstraint(slaveA,
twistValA,
n=names.addModifier(self.basename,
'orientConstraint',
addSuffix='A'))[0]
valBOri = cmds.orientConstraint(slaveA,
dummyTarget,
twistValB,
n=names.addModifier(self.basename,
'orientConstraint',
addSuffix='B'))[0]
if noflip:
cmds.setAttr("{0}.interpType".format(valAOri), 0)
cmds.setAttr("{0}.interpType".format(valBOri), 0)
# Create transform for easy attribute access and prep
twistGrp = cmds.group(n=names.addModifier(self.basename,
'grp',
addSuffix='Ext'),
em=1,
w=1)
cmds.parent(twistGrp, masterGrp)
attrList = [
".tx", ".ty", ".tz", ".rx", ".ry", ".rz", ".sx", ".sy", ".sz", ".v"
]
for attr in attrList:
cmds.setAttr(twistGrp + attr, l=1, k=0)
cmds.addAttr(twistGrp, ln="twistValA", k=1)
cmds.addAttr(twistGrp, ln="twistValB", k=1)
cmds.connectAttr("{0}.rx".format(twistValA),
"{0}.twistValA".format(twistGrp))
valBmdl = cmds.createNode("multDoubleLinear",
n=names.addModifier(self.basename,
'multDoubleLinear',
addSuffix='ValueB'))
cmds.setAttr("{0}.input2".format(valBmdl), 2)
cmds.connectAttr("{0}.rx".format(twistValB),
"{0}.input1".format(valBmdl))
cmds.connectAttr("{0}.output".format(valBmdl),
"{0}.twistValB".format(twistGrp))
# Create a group for the twist joints to get a better ui result
jntGrp = cmds.group(n=names.addModifier(self.basename,
'grp',
addSuffix='Joints'),
em=1,
p=masterGrp)
cmds.parentConstraint(dummyParent,
jntGrp,
mo=0,
n=names.addModifier(self.basename,
'parentConstraint',
addSuffix='Joints'))
# Get the placement values for the twist joints
val = self.val + 1
jntPlacement = []
if self.aimAxis.lower() == "y":
tr = "ty"
elif self.aimAxis.lower() == "z":
tr = "tz"
else:
tr = "tx"
self.twistJoints = list()
for i in range(val):
i += 1
if not i == val:
div = float(i) / float(val)
jntPlacement = float("{0:.2f}".format(self.jntLen * div))
curJoint = str(i)
# Create, place and connect twist joints based on extracted information
jnt = cmds.duplicate(dummyParent,
po=1,
n=names.addModifier(
self.basename,
'joint',
addSuffix=curJoint))[0]
cmds.parent(jnt, jntGrp)
for i in ["jointOrientX", "jointOrientY", "jointOrientZ"]:
cmds.setAttr("{0}.{1}".format(jnt, i), 0)
if stretch:
stretchMdl = cmds.createNode(
"multDoubleLinear",
n=names.addModifier(self.basename,
'multDoubleLinear',
addSuffix=curJoint + "Stretch"))
cmds.setAttr("{0}.input2".format(stretchMdl), div)
cmds.connectAttr("{0}.{1}".format(dummyTarget, tr),
"{0}.input1".format(stretchMdl))
cmds.connectAttr("{0}.output".format(stretchMdl),
"{0}.{1}".format(jnt, tr))
else:
cmds.setAttr("{0}.{1}".format(jnt, tr), jntPlacement)
twistValmdl = cmds.createNode("multDoubleLinear",
n=names.addModifier(
self.basename,
'multDoubleLinear',
addSuffix=curJoint))
cmds.setAttr("{0}.input2".format(twistValmdl), (div * -1))
if noflip:
cmds.connectAttr("{0}.twistValB".format(twistGrp),
"{0}.input1".format(twistValmdl))
else:
cmds.connectAttr("{0}.twistValA".format(twistGrp),
"{0}.input1".format(twistValmdl))
cmds.connectAttr("{0}.output".format(twistValmdl),
"{0}.rx".format(jnt))
# Pretty it up a bit
cmds.setAttr("{0}.overrideEnabled".format(jnt), 1)
cmds.setAttr("{0}.radius".format(jnt), 0.5)
cmds.setAttr("{0}.overrideColor".format(jnt), 12)
# Lock values
attrList = ["tx", "ty", "tz", "rx", "ry", "rz"]
for attr in attrList:
cmds.setAttr("{0}.{1}".format(jnt, attr), l=1)
# Assign joints to variable
self.twistJoints = self.twistJoints + [jnt]
# Clean up
cmds.setAttr("{0}.v".format(dummyParent), 0)
