def do_ti_install(install_profile, screen, update_status_func, quit_event,
time_change_event):
'''Installation engine for text installer.
Raises InstallationError for any error occurred during install.
'''
#
# The following information is needed for installation.
# Make sure they are provided before even starting
#
# locale
locale = install_profile.system.locale
logging.debug("default locale: %s", locale)
# timezone
timezone = install_profile.system.tz_timezone
logging.debug("time zone: %s", timezone)
# hostname
hostname = install_profile.system.hostname
logging.debug("hostname: %s", hostname)
ulogin = None
user_home_dir = ""
root_user = install_profile.users[0]
root_pass = root_user.password
reg_user = install_profile.users[1]
ureal_name = reg_user.real_name
ulogin = reg_user.login_name
upass = reg_user.password
logging.debug("Root password: %s", root_pass)
if ulogin:
user_home_dir = "/export/home/" + ulogin
ZFS_SHARED_FS.insert(0, user_home_dir)
logging.debug("User real name: %s", ureal_name)
logging.debug("User login: %s", ulogin)
logging.debug("User password: %s", upass)
(inst_device, inst_device_size) = \
install_profile.disk.get_install_dev_name_and_size()
logging.debug("Installation Device Name: %s", inst_device)
logging.debug("Installation Device Size: %sMB", inst_device_size)
swap_dump = ti_utils.SwapDump()
min_inst_size = ti_utils.get_minimum_size(swap_dump)
logging.debug("Minimum required size: %sMB", min_inst_size)
if (inst_device_size < min_inst_size):
logging.error("Size of device specified for installation "
"is too small")
logging.error("Size of install device: %sMB", inst_device_size)
logging.error("Minimum required size: %sMB", min_inst_size)
raise ti_utils.InstallationError
recommended_size = ti_utils.get_recommended_size(swap_dump)
logging.debug("Recommended size: %sMB", recommended_size)
if (inst_device_size < recommended_size):
# Warn users that their install target size is not optimal
# Just log the warning, but continue with the installation.
logging.warning("Size of device specified for installation is "
"not optimal")
logging.warning("Size of install device: %sMB", inst_device_size)
logging.warning("Recommended size: %sMB", recommended_size)
# Validate the value specified for timezone
if not tz_isvalid(timezone):
logging.error("Timezone value specified (%s) is not valid", timezone)
raise ti_utils.InstallationError
# Compute the time to set here. It will be set after the rtc
# command is run, if on x86.
install_time = datetime.datetime.now() + install_profile.system.time_offset
if platform.processor() == "i386":
#
# At this time, the /usr/sbin/rtc command does not work in alternate
# root. It hard codes to use /etc/rtc_config.
# Therefore, we set the value for rtc_config in the live environment
# so it will get copied over to the alternate root.
#
exec_cmd([RTC_CMD, "-z", timezone], "set timezone")
exec_cmd([RTC_CMD, "-c"], "set timezone")
#
# Set the system time to the time specified by the user
# The value to set the time to is computed before the "rtc" commands.
# This is required because rtc will mess up the computation of the
# time to set. The rtc command must be run before the command
# to set time. Otherwise, the time that we set will be overwritten
# after running /usr/sbin/rtc.
#
cmd = ["/usr/bin/date", install_time.strftime("%m%d%H%M%y")]
exec_cmd(cmd, "set system time")
time_change_event.set()
global INSTALL_STATUS
INSTALL_STATUS = InstallStatus(screen, update_status_func, quit_event)
rootpool_name = install_profile.disk.get_install_root_pool()
cleanup_existing_install_target(install_profile, inst_device)
do_ti(install_profile, swap_dump)
do_transfer()
ict_mesg = "Completing transfer process"
INSTALL_STATUS.update(InstallStatus.ICT, 0, ict_mesg)
# Save the timezone in the installed root's /etc/default/init file
ti_utils.save_timezone_in_init(INSTALLED_ROOT_DIR, timezone)
# If swap was created, add appropriate entry to <target>/etc/vfstab
swap_device = swap_dump.get_swap_device(rootpool_name)
logging.debug("Swap device: %s", swap_device)
ti_utils.setup_etc_vfstab_for_swap(swap_device, INSTALLED_ROOT_DIR)
try:
run_ICTs(install_profile, hostname, ict_mesg, inst_device, locale,
root_pass, ulogin, upass, ureal_name, rootpool_name)
finally:
post_install_cleanup(install_profile, rootpool_name)
INSTALL_STATUS.update(InstallStatus.ICT, 100, ict_mesg)
def do_ti_install(install_profile, screen, update_status_func, quit_event,
time_change_event):
'''Installation engine for text installer.
Raises InstallationError for any error occurred during install.
'''
#
# The following information is needed for installation.
# Make sure they are provided before even starting
#
# locale
locale = install_profile.system.locale
logging.debug("default locale: %s", locale)
# timezone
timezone = install_profile.system.tz_timezone
logging.debug("time zone: %s", timezone)
# hostname
hostname = install_profile.system.hostname
logging.debug("hostname: %s", hostname)
ulogin = None
user_home_dir = ""
root_user = install_profile.users[0]
root_pass = root_user.password
reg_user = install_profile.users[1]
ureal_name = reg_user.real_name
ulogin = reg_user.login_name
upass = reg_user.password
logging.debug("Root password: %s", root_pass)
if ulogin:
user_home_dir = "/export/home/" + ulogin
ZFS_SHARED_FS.insert(0, user_home_dir)
logging.debug("User real name: %s", ureal_name)
logging.debug("User login: %s", ulogin)
logging.debug("User password: %s", upass)
(inst_device, inst_device_size) = \
install_profile.disk.get_install_dev_name_and_size()
logging.debug("Installation Device Name: %s", inst_device)
logging.debug("Installation Device Size: %sMB", inst_device_size)
swap_dump = ti_utils.SwapDump()
min_inst_size = ti_utils.get_minimum_size(swap_dump)
logging.debug("Minimum required size: %sMB", min_inst_size)
if (inst_device_size < min_inst_size):
logging.error("Size of device specified for installation "
"is too small")
logging.error("Size of install device: %sMB", inst_device_size)
logging.error("Minimum required size: %sMB", min_inst_size)
raise ti_utils.InstallationError
recommended_size = ti_utils.get_recommended_size(swap_dump)
logging.debug("Recommended size: %sMB", recommended_size)
if (inst_device_size < recommended_size):
# Warn users that their install target size is not optimal
# Just log the warning, but continue with the installation.
logging.warning("Size of device specified for installation is "
"not optimal")
logging.warning("Size of install device: %sMB", inst_device_size)
logging.warning("Recommended size: %sMB", recommended_size)
# Validate the value specified for timezone
if not tz_isvalid(timezone):
logging.error("Timezone value specified (%s) is not valid", timezone)
raise ti_utils.InstallationError
# Compute the time to set here. It will be set after the rtc
# command is run, if on x86.
install_time = datetime.datetime.now() + install_profile.system.time_offset
if platform.processor() == "i386":
#
# At this time, the /usr/sbin/rtc command does not work in alternate
# root. It hard codes to use /etc/rtc_config.
# Therefore, we set the value for rtc_config in the live environment
# so it will get copied over to the alternate root.
#
exec_cmd([RTC_CMD, "-z", timezone], "set timezone")
exec_cmd([RTC_CMD, "-c"], "set timezone")
#
# Set the system time to the time specified by the user
# The value to set the time to is computed before the "rtc" commands.
# This is required because rtc will mess up the computation of the
# time to set. The rtc command must be run before the command
# to set time. Otherwise, the time that we set will be overwritten
# after running /usr/sbin/rtc.
#
cmd = ["/usr/bin/date", install_time.strftime("%m%d%H%M%y")]
exec_cmd(cmd, "set system time")
time_change_event.set()
global INSTALL_STATUS
INSTALL_STATUS = InstallStatus(screen, update_status_func, quit_event)
rootpool_name = install_profile.disk.get_install_root_pool()
cleanup_existing_install_target(install_profile, inst_device)
do_ti(install_profile, swap_dump)
do_transfer()
ict_mesg = "Completing transfer process"
INSTALL_STATUS.update(InstallStatus.ICT, 0, ict_mesg)
# Save the timezone in the installed root's /etc/default/init file
ti_utils.save_timezone_in_init(INSTALLED_ROOT_DIR, timezone)
# If swap was created, add appropriate entry to <target>/etc/vfstab
swap_device = swap_dump.get_swap_device(rootpool_name)
logging.debug("Swap device: %s", swap_device)
ti_utils.setup_etc_vfstab_for_swap(swap_device, INSTALLED_ROOT_DIR)
#
# The /etc/.sysIDtool.state file needs to be written before calling
# the ICTs, because it gets copied over by the ICTs into the installed
# system.
#
create_sysid_file()
try:
run_ICTs(install_profile, hostname, ict_mesg, inst_device,
locale, root_pass, ulogin, upass, ureal_name,
rootpool_name)
finally:
post_install_cleanup(install_profile, rootpool_name)
INSTALL_STATUS.update(InstallStatus.ICT, 100, ict_mesg)