def get_proxy_label(self, xmlgroup, xmlname):
pxm = servermanager.ProxyManager()
prototype = pxm.GetPrototypeProxy(xmlgroup, xmlname)
if not prototype:
# a bit of a hack but we assume that there's a stub of some
# writer that's not available in this build but is available
# with the build used by the simulation code (probably through a plugin)
# this stub must have the proper name in the coprocessing hints
print "WARNING: Could not find", xmlname, "writer in", xmlgroup, \
"XML group. This is not a problem as long as the writer is available with " \
"the ParaView build used by the simulation code."
return servermanager._make_name_valid(xmlname)
return servermanager._make_name_valid(prototype.GetXMLLabel())
def updateProxyProperties(proxy, properties):
"""
Loop over the properties object and update the mapping properties
to the given proxy.
"""
try:
allowedProperties = proxy.ListProperties()
for key in properties:
validKey = servermanager._make_name_valid(key)
if validKey in allowedProperties:
value = removeUnicode(properties[key])
property = servermanager._wrap_property(
proxy, proxy.GetProperty(validKey))
if property.GetDomain('proxy_list') and len(
value) == 1 and type(value[0]) == str:
try:
idx = property.GetAvailable().index(value[0])
proxyToSet = servermanager._getPyProxy(
property.GetDomain('proxy_list').GetProxy(idx))
property.SetData(proxyToSet)
except:
traceback.print_stack()
pass
elif value == 'vtkProcessId':
property.SetElement(0, value)
else:
property.SetData(value)
except:
traceback.print_stack()
def updateProxyProperties(proxy, properties):
"""
Loop over the properties object and update the mapping properties
to the given proxy.
"""
try:
allowedProperties = proxy.ListProperties()
for key in properties:
validKey = servermanager._make_name_valid(key)
if validKey in allowedProperties:
value = removeUnicode(properties[key])
property = servermanager._wrap_property(proxy, proxy.GetProperty(validKey))
if property.GetDomain('proxy_list') and len(value) == 1 and type(value[0]) == str:
try:
idx = property.GetAvailable().index(value[0])
proxyToSet = servermanager._getPyProxy(property.GetDomain('proxy_list').GetProxy(idx))
property.SetData(proxyToSet)
except:
traceback.print_stack()
pass
elif value == 'vtkProcessId':
property.SetElement(0, value)
else:
property.SetData(value)
except:
traceback.print_stack()
def get_proxy_label(self, xmlgroup, xmlname):
pxm = servermanager.ProxyManager()
prototype = pxm.GetPrototypeProxy(xmlgroup, xmlname)
if not prototype:
# a bit of a hack but we assume that there's a stub of some
# writer that's not available in this build but is available
# with the build used by the simulation code (probably through a plugin)
# this stub must have the proper name in the coprocessing hints
print "WARNING: Could not find", xmlname, "writer in", xmlgroup, "XML group. This is not a problem as long as the writer is available with " "the ParaView build used by the simulation code."
ctor = servermanager._make_name_valid(xmlname)
else:
ctor = servermanager._make_name_valid(prototype.GetXMLLabel())
# TODO: use servermanager.ProxyManager().NewProxy() instead
# we create the writer proxy such that it is not registered with the
# ParaViewPipelineController, so its state is not sent to ParaView Live.
return "servermanager.%s.%s" % (xmlgroup, ctor)
def get_proxy_label(self, xmlgroup, xmlname):
pxm = servermanager.ProxyManager()
prototype = pxm.GetPrototypeProxy(xmlgroup, xmlname)
if not prototype:
# a bit of a hack but we assume that there's a stub of some
# writer that's not available in this build but is available
# with the build used by the simulation code (probably through a plugin)
# this stub must have the proper name in the coprocessing hints
print "WARNING: Could not find", xmlname, "writer in", xmlgroup, \
"XML group. This is not a problem as long as the writer is available with " \
"the ParaView build used by the simulation code."
ctor = servermanager._make_name_valid(xmlname)
else:
ctor = servermanager._make_name_valid(prototype.GetXMLLabel())
# TODO: use servermanager.ProxyManager().NewProxy() instead
# we create the writer proxy such that it is not registered with the
# ParaViewPipelineController, so its state is not sent to ParaView Live.
return "servermanager.%s.%s" % (xmlgroup, ctor)
def make_trace(self):
"""gather trace for the writer proxies that are not in the trace pipeline but
rather in the new export state.
"""
res = []
res.append("")
res.append("# Now any catalyst writers")
pxm = servermanager.ProxyManager()
globalepxy = pxm.GetProxy("export_global", "catalyst")
exports = pxm.GetProxiesInGroup("export_writers") #todo should use ExportDepot
for x in exports:
xs = x[0]
pxy = pxm.GetProxy('export_writers', xs)
if not pxy.HasAnnotation('enabled'):
continue
xmlname = pxy.GetXMLName()
if xmlname == "Cinema image options":
# skip the array and property export information we stuff in this proxy
continue
# note: this logic is not truly correct. the way this is setup,
# there is no good way to really find the variable name used for the input since the names
# that smtrace assigns are already cleaned up at this point.
# Ideally, this class should have been written as a true `Accessor` so it could
# be traced correctly. Right now, I am hacking this to attempt to get a reasonable name
# that works in most cases.
inputname = xs.split('|')[0]
inputname = servermanager._make_name_valid(inputname)
inputname = inputname[0].lower() + inputname[1:]
writername = xs.split('|')[1]
xmlgroup = pxy.GetXMLGroup()
padding_amount = globalepxy.GetProperty("FileNamePadding").GetElement(0)
write_frequency = pxy.GetProperty("WriteFrequency").GetElement(0)
filename = pxy.GetProperty("CatalystFilePattern").GetElement(0)
cpstate_globals = get_globals()
sim_inputs = locate_simulation_inputs(pxy)
for sim_input_name in sim_inputs:
if not write_frequency in cpstate_globals.write_frequencies[sim_input_name]:
cpstate_globals.write_frequencies[sim_input_name].append(write_frequency)
cpstate_globals.write_frequencies[sim_input_name].sort()
if not sim_input_name in cpstate_globals.channels_needed:
cpstate_globals.channels_needed.append(sim_input_name)
prototype = pxm.GetPrototypeProxy(xmlgroup, xmlname)
if not prototype:
varname = self.__make_name(xmlname)
else:
varname = self.__make_name(prototype.GetXMLLabel())
# Write pass array proxy
if pxy.GetProperty("ChooseArraysToWrite").GetElement(0) == 1:
point_arrays = []
cell_arrays = []
arrays_property = pxy.GetProperty("PointDataArrays")
for i in range(arrays_property.GetNumberOfElements()):
point_arrays.append(arrays_property.GetElement(i))
arrays_property = pxy.GetProperty("CellDataArrays")
for i in range(arrays_property.GetNumberOfElements()):
cell_arrays.append(arrays_property.GetElement(i))
f = "%s_arrays = PassArrays(Input=%s, PointDataArrays=%s, CellDataArrays=%s)" % \
(inputname, inputname, str(point_arrays), str(cell_arrays))
inputname = "%s_arrays" % inputname
res.append(f)
# Actual writer
f = "%s = servermanager.writers.%s(Input=%s)" % (varname, writername, inputname)
res.append(f)
# set various writer properties, except for the filename since that will be set later.
# point, cell and field arrays should already be set
notNeededProperties = ['CatalystFilePattern', 'CellDataArrays', 'ChooseArraysToWrite', 'EdgeDataArrays',
'FieldDataArrays', 'FileName', 'FileNameSuffix', 'Filenamesuffix', 'Input',
'PointDataArrays', 'WriteFrequency',]
for p in pxy.ListProperties():
if p not in notNeededProperties and len(pxy.GetProperty(p)):
if isinstance(pxy.GetProperty(p).GetData(), servermanager.Proxy):
proxyvalue = pxy.GetProperty(p).GetData()
cpstate_globals = get_globals()
if proxyvalue in cpstate_globals.variable_to_name_map:
f = "%s.%s = %s" % (varname, p, cpstate_globals.variable_to_name_map[proxyvalue])
res.append(f)
elif hasattr(pxy.GetProperty(p), 'GetElement'):
value = pxy.GetProperty(p).GetElement(0)
if isinstance(value, numbers.Number):
f = "%s.%s = %s" % (varname, p, value)
elif isinstance(value, str):
f = "%s.%s = '%s'" % (varname, p, value)
else:
f = "%s.%s = %s" % (varname, p, str(value))
res.append(f)
if self.__make_temporal_script:
f = "STP.RegisterWriter(%s, '%s', tp_writers)" % (
varname, filename)
else:
f = "coprocessor.RegisterWriter(%s, filename='%s', freq=%s, paddingamount=%s)" % (
varname, filename, write_frequency, padding_amount)
res.append(f)
res.append("")
if len(res) == 2:
return [] # don't clutter output if there are no writers
return res
def make_trace(self):
"""gather trace for the writer proxies that are not in the trace pipeline but
rather in the new export state.
"""
res = []
res.append("")
res.append("# Now any catalyst writers")
pxm = servermanager.ProxyManager()
globalepxy = pxm.GetProxy("export_global", "catalyst")
exports = pxm.GetProxiesInGroup(
"export_writers") #todo should use ExportDepot
for x in exports:
xs = x[0]
pxy = pxm.GetProxy('export_writers', xs)
if not pxy.HasAnnotation('enabled'):
continue
xmlname = pxy.GetXMLName()
if xmlname == "Cinema image options":
# skip the array and property export information we stuff in this proxy
continue
# note: this logic is not truly correct. the way this is setup,
# there is no good way to really find the variable name used for the input since the names
# that smtrace assigns are already cleaned up at this point.
# Ideally, this class should have been written as a true `Accessor` so it could
# be traced correctly. Right now, I am hacking this to attempt to get a reasonable name
# that works in most cases.
inputname = xs.split('|')[0]
inputname = servermanager._make_name_valid(inputname)
inputname = inputname[0].lower() + inputname[1:]
writername = xs.split('|')[1]
xmlgroup = pxy.GetXMLGroup()
padding_amount = globalepxy.GetProperty(
"FileNamePadding").GetElement(0)
write_frequency = pxy.GetProperty("WriteFrequency").GetElement(0)
filename = pxy.GetProperty("CatalystFilePattern").GetElement(0)
DataMode = pxy.GetProperty("DataMode")
if DataMode is not None:
DataMode = pxy.GetProperty("DataMode").GetElement(0)
HeaderType = pxy.GetProperty("HeaderType")
if HeaderType is not None:
HeaderType = pxy.GetProperty("HeaderType").GetElement(0)
EncodeAppendedData = pxy.GetProperty("EncodeAppendedData")
if EncodeAppendedData is not None:
EncodeAppendedData = pxy.GetProperty(
"EncodeAppendedData").GetElement(0) != 0
CompressorType = pxy.GetProperty("CompressorType")
if CompressorType is not None:
CompressorType = pxy.GetProperty("CompressorType").GetElement(
0)
CompressionLevel = pxy.GetProperty("CompressionLevel")
if CompressionLevel is not None:
CompressionLevel = pxy.GetProperty(
"CompressionLevel").GetElement(0)
cpstate_globals = get_globals()
sim_inputs = locate_simulation_inputs(pxy)
for sim_input_name in sim_inputs:
if not write_frequency in cpstate_globals.write_frequencies[
sim_input_name]:
cpstate_globals.write_frequencies[sim_input_name].append(
write_frequency)
cpstate_globals.write_frequencies[sim_input_name].sort()
if not sim_input_name in cpstate_globals.channels_needed:
cpstate_globals.channels_needed.append(sim_input_name)
prototype = pxm.GetPrototypeProxy(xmlgroup, xmlname)
if not prototype:
varname = self.__make_name(xmlname)
else:
varname = self.__make_name(prototype.GetXMLLabel())
# Write pass array proxy
if pxy.GetProperty("ChooseArraysToWrite").GetElement(0) == 1:
point_arrays = []
cell_arrays = []
arrays_property = pxy.GetProperty("PointDataArrays")
for i in range(arrays_property.GetNumberOfElements()):
point_arrays.append(arrays_property.GetElement(i))
arrays_property = pxy.GetProperty("CellDataArrays")
for i in range(arrays_property.GetNumberOfElements()):
cell_arrays.append(arrays_property.GetElement(i))
f = "%s_arrays = PassArrays(Input=%s, PointDataArrays=%s, CellDataArrays=%s)" % \
(inputname, inputname, str(point_arrays), str(cell_arrays))
inputname = "%s_arrays" % inputname
res.append(f)
# Actual writer
f = "%s = servermanager.writers.%s(Input=%s)" % (
varname, writername, inputname)
res.append(f)
if self.__make_temporal_script:
f = "STP.RegisterWriter(%s, '%s', tp_writers)" % (varname,
filename)
else:
f = "coprocessor.RegisterWriter(%s, filename='%s', freq=%s, paddingamount=%s, DataMode='%s', HeaderType='%s', EncodeAppendedData=%s, CompressorType='%s', CompressionLevel='%s')" % (
varname, filename, write_frequency, padding_amount,
DataMode, HeaderType, EncodeAppendedData, CompressorType,
CompressionLevel)
res.append(f)
res.append("")
if len(res) == 2:
return [] # don't clutter output if there are no writers
return res