def flash_connectivity(comport, jlink_snr):
flasher = Flasher(serial_port=comport, snr=jlink_snr)
if flasher.fw_check():
print("Board already flashed with connectivity firmware.")
else:
print("Flashing connectivity firmware...")
flasher.fw_flash()
print("Connectivity firmware flashed.")
flasher.reset()
time.sleep(1)
def ble(package, conn_ic_id, port, connect_delay, name, address, jlink_snr,
flash_connectivity):
"""
Perform a Device Firmware Update on a device with a bootloader that supports BLE DFU.
This requires a second nRF device, connected to this computer, with connectivity firmware
loaded. The connectivity device will perform the DFU procedure onto the target device.
"""
ble_driver_init(conn_ic_id)
if name is None and address is None:
name = 'DfuTarg'
click.echo(
"No target selected. Default device name: {} is used.".format(
name))
if port is None and jlink_snr is not None:
port = get_port_by_snr(jlink_snr)
elif port is None:
port = enumerate_ports()
if port is None:
click.echo(
"\nNo Segger USB CDC ports found, please connect your board.")
return
if flash_connectivity:
flasher = Flasher(serial_port=port, snr=jlink_snr)
if flasher.fw_check():
click.echo("Board already flashed with connectivity firmware.")
else:
click.echo("Flashing connectivity firmware...")
flasher.fw_flash()
click.echo("Connectivity firmware flashed.")
flasher.reset()
time.sleep(1)
logger.info("Using connectivity board at serial port: {}".format(port))
ble_backend = DfuTransportBle(serial_port=str(port),
target_device_name=str(name),
target_device_addr=str(address))
ble_backend.register_events_callback(DfuEvent.PROGRESS_EVENT,
update_progress)
dfu = Dfu(zip_file_path=package,
dfu_transport=ble_backend,
connect_delay=connect_delay)
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
click.echo("Device programmed.")
def ble(package, conn_ic_id, port, name, address, jlink_snr, flash_connectivity):
ble_driver_init(conn_ic_id)
"""Perform a Device Firmware Update on a device with a bootloader that supports BLE DFU."""
if name is None and address is None:
name = 'DfuTarg'
click.echo("No target selected. Default device name: {} is used.".format(name))
if port is None and jlink_snr is not None:
click.echo("Please specify also serial port.")
return
elif port is None:
port = enumerate_ports()
if port is None:
click.echo("\nNo Segger USB CDC ports found, please connect your board.")
return
if flash_connectivity:
flasher = Flasher(serial_port=port, snr = jlink_snr)
if flasher.fw_check():
click.echo("Board already flashed with connectivity firmware.")
else:
click.echo("Flashing connectivity firmware...")
flasher.fw_flash()
click.echo("Connectivity firmware flashed.")
flasher.reset()
time.sleep(1)
logger.info("Using connectivity board at serial port: {}".format(port))
ble_backend = DfuTransportBle(serial_port=str(port),
target_device_name=str(name),
target_device_addr=str(address))
ble_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(zip_file_path = package, dfu_transport = ble_backend)
if logger.getEffectiveLevel() > logging.INFO:
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
else:
dfu.dfu_send_images()
click.echo("Device programmed.")
def test_programming(self):
settings = Settings.current()
serial_ports = BLEDriver.enum_serial_ports()
# Check that from enumeration matches
# kits provided from settings
found_ports = list(map(lambda port: port.port, serial_ports))
for serial_port in settings.serial_ports:
self.assertIn(serial_port, found_ports)
for serial_port in serial_ports:
if serial_port.port in settings.serial_ports:
serial_number = serial_port.serial_number
logger.info("%s/%s deleting existing firmware",
serial_port.port, serial_number)
flasher = Flasher(serial_port=serial_port.port)
flasher.erase()
self.assertFalse(
flasher.fw_check(),
"#{} must be programmed because it is erased".format(
serial_number),
)
flasher.fw_flash()
logger.info("%s/%s programmed", serial_port.port,
serial_number)
self.assertTrue(
flasher.fw_check(),
"#{} is programmed, shall not be programmed again".format(
serial_number),
)
# Try to use the device with leading zeroes in serial number removed
flasher = Flasher(snr=serial_port.serial_number.lstrip('0'))
flasher.reset()
logger.info("%s/%s programmed successfully", serial_port.port,
serial_number)
def main(port):
descs = BLEDriver.enum_serial_ports()
print("enum_serial_ports: {} serial ports found".format(len(descs)))
for i, d in enumerate(descs):
print("\nSerial port #{}:".format(i))
print("|")
print("|- Port: \"{}\"".format(d.port))
print("|- Manufacturer: \"{}\"".format(d.manufacturer))
print("|- Serial Number: \"{}\"".format(d.serial_number))
print("|- PnP ID: \"{}\"".format(d.pnp_id))
print("|- Location ID: \"{}\"".format(d.location_id))
print("|- Vendor ID: \"{}\"".format(d.vendor_id))
print("|_ Product ID: \"{}\"".format(d.product_id))
if port != None:
flasher = Flasher(serial_port=port)
if flasher.fw_check():
print("Port \"{}\" already flashed with connectivity firmware".format(port))
else:
print("Flashing Port \"{}\"".format(port))
flasher.fw_flash()
print("Firmware flashed")
def main(port):
descs = BLEDriver.enum_serial_ports()
print("enum_serial_ports: {} serial ports found".format(len(descs)))
for i, d in enumerate(descs):
print("\nSerial port #{}:".format(i))
print("|")
print("|- Port: \"{}\"".format(d.port))
print("|- Manufacturer: \"{}\"".format(d.manufacturer))
print("|- Serial Number: \"{}\"".format(d.serial_number))
print("|- PnP ID: \"{}\"".format(d.pnp_id))
print("|- Location ID: \"{}\"".format(d.location_id))
print("|- Vendor ID: \"{}\"".format(d.vendor_id))
print("|_ Product ID: \"{}\"".format(d.product_id))
if port != None:
flasher = Flasher(serial_port=port)
if flasher.fw_check():
print("Port \"{}\" already flashed with connectivity firmware".
format(port))
else:
print("Flashing Port \"{}\"".format(port))
flasher.fw_flash()
print("Firmware flashed")
def ble(package, port, name, address, jlink_snr, flash_connectivity):
"""Perform a Device Firmware Update on a device with a bootloader that supports BLE DFU."""
if name is None and address is None:
name = 'DfuTarg'
click.echo("No target selected. Default device name: {} is used.".format(name))
if port is None and jlink_snr is not None:
click.echo("Please specify also serial port.")
return
elif port is None:
port = enumerate_ports()
if flash_connectivity:
flasher = Flasher(serial_port=port, snr = jlink_snr)
if flasher.fw_check():
click.echo("Connectivity already flashed with firmware.")
else:
click.echo("Flashing connectivity ")
flasher.fw_flash()
click.echo("Connectivity flashed")
flasher.reset()
time.sleep(1)
ble_backend = DfuTransportBle(serial_port=str(port),
target_device_name=str(name),
target_device_addr=str(address))
ble_backend.register_events_callback(DfuEvent.PROGRESS_EVENT, update_progress)
dfu = Dfu(zip_file_path = package, dfu_transport = ble_backend)
with click.progressbar(length=dfu.dfu_get_total_size()) as bar:
global global_bar
global_bar = bar
dfu.dfu_send_images()
click.echo("Device programmed.")
conn.close()
args.name = ' '.join(args.name)
comport = args.com[0]
jlink_snr = args.snr[0]
flash_connectivity = True
logging.basicConfig(format='%(message)s', level=logging.INFO)
if flash_connectivity:
flasher = Flasher(serial_port=comport, snr = jlink_snr)
if flasher.fw_check():
logger.info("Board already flashed with connectivity firmware.")
else:
logger.info("Flashing connectivity firmware...")
flasher.fw_flash()
logger.info("Connectivity firmware flashed.")
flasher.reset()
time.sleep(1)
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
print 'Socket created'
#Bind socket to local host and port
try:
s.bind((HOST, PORT))
except socket.error as msg:
print 'Bind failed. Error Code : ' + str(msg[0]) + ' Message ' + msg[1]