def main():
"""
Get configuration, get driver, and build handler and start it.
"""
args = get_args()
driver = serial_link.get_base_args_driver(args)
# Driver with context
# Handler with context
with Handler(Framer(driver.read, driver.write,
verbose=args.verbose)) as link:
data = bytearray(open(args.firmware, 'rb').read())
def progress_cb(size, _):
sys.stdout.write("\rProgress: %d%% \r" %
(100 * size / len(data)))
sys.stdout.flush()
print('Transferring image file...')
FileIO(link).write(b"upgrade.image_set.bin",
data,
progress_cb=progress_cb)
print('Committing file to flash...')
link.add_callback(serial_link.log_printer, SBP_MSG_LOG)
link.add_callback(serial_link.printer, SBP_MSG_PRINT_DEP)
code = shell_command(link, b"upgrade_tool upgrade.image_set.bin", 300)
if code != 0:
print('Failed to perform upgrade (code = %d)' % code)
return
print('Resetting Piksi...')
link(MsgReset(flags=0))
def main(args=None):
"""
Get configuration, get driver, and build handler and start it.
"""
args = get_args(args)
command = args.command
driver = serial_link.get_base_args_driver(args)
with Handler(Framer(driver.read, driver.write,
verbose=args.verbose)) as link:
settings = Settings(link, timeout=args.timeout)
with settings:
if command == 'write':
settings.write(args.section,
args.setting,
args.value,
verbose=args.verbose)
elif command == 'read':
print(
settings.read(args.section,
args.setting,
verbose=args.verbose))
elif command == 'all':
settings.read_all(verbose=True)
elif command == 'save':
settings.save()
elif command == 'reset':
settings.reset()
elif command == 'read_to_file':
settings.read_to_file(args.output, verbose=args.verbose)
elif command == 'write_from_file':
settings.write_from_file(args.filename, verbose=args.verbose)
# If saving was requested, we have done a write command, and the write was requested, we save
if command.startswith("write") and args.save_after_write:
print("Saving Settings to Flash.")
settings.save()
def main():
args = get_args()
selected_driver = serial_link.get_base_args_driver(args)
# Driver with context
with selected_driver as driver:
# Handler with context
with Handler(Framer(driver.read, driver.write, args.verbose)) as link:
f = FileIO(link)
try:
if args.write:
f.write(raw_filename(args.write[1]), bytearray(open(args.write[0], 'rb').read()))
elif args.read:
if len(args.read) not in [1, 2]:
sys.stderr.write("Error: fileio read requires either 1 or 2 arguments, SOURCE and optionally DEST.")
sys.exit(1)
data = f.read(raw_filename(args.read[0]))
if len(args.read) == 2:
with open(args.read[1], ('w' if args.hex else 'wb')) as fd:
fd.write(hexdump(data) if args.hex else data)
elif args.hex:
print(hexdump(data))
else:
print(printable_text_from_device(data))
elif args.delete:
f.remove(raw_filename(args.delete[0]))
elif args.list is not None:
print_dir_listing(f.readdir(raw_filename(args.list[0])))
else:
print("No command given, listing root directory:")
print_dir_listing(f.readdir())
except KeyboardInterrupt:
pass
def main():
"""
Get configuration, get driver, and build handler and start it.
"""
args = get_args()
command = args.command
return_code = 0
driver = serial_link.get_base_args_driver(args)
with Handler(Framer(driver.read, driver.write, verbose=args.verbose)) as link:
settings = Settings(link, timeout=args.timeout)
with settings:
if command == 'write':
settings.write(args.section, args.setting, args.value, verbose=args.verbose)
elif command == 'read':
print(settings.read(args.section, args.setting, verbose=args.verbose))
elif command == 'all':
settings.read_all(verbose=True)
elif command == 'save':
settings.save()
elif command == 'reset':
settings.reset()
elif command == 'read_to_file':
settings.read_to_file(args.output, verbose=args.verbose)
elif command == 'write_from_file':
settings.write_from_file(args.filename, verbose=args.verbose)
# If saving was requested, we have done a write command, and the write was requested, we save
if command.startswith("write") and args.save_after_write:
print("Saving Settings to Flash.")
settings.save()
def main():
"""
Get configuration, get driver, and build handler and start it.
"""
args = get_args()
driver = serial_link.get_base_args_driver(args)
# Driver with context
# Handler with context
with Handler(Framer(driver.read, driver.write, verbose=args.verbose)) as link:
data = bytearray(open(args.file, 'rb').read())
def progress_cb(size):
sys.stdout.write("\rProgress: %d%% \r" %
(100 * size / len(data)))
sys.stdout.flush()
print('Transferring image file...')
FileIO(link).write(
b"upgrade.image_set.bin", data, progress_cb=progress_cb)
print('Committing file to flash...')
link.add_callback(serial_link.log_printer, SBP_MSG_LOG)
link.add_callback(serial_link.printer, SBP_MSG_PRINT_DEP)
code = shell_command(link, b"upgrade_tool upgrade.image_set.bin", 300)
if code != 0:
print('Failed to perform upgrade (code = %d)' % code)
return
print('Resetting Piksi...')
link(MsgReset(flags=0))
def connection_from_args(args):
cnx_data = None
connect_error = None
description = ''
mode = ''
port = getattr(args, 'port', None)
baud = getattr(args, 'baud', None)
if port is not None:
if args.tcp:
# Use the TPC driver and interpret port arg as host:port
description = port
mode = 'TCP/IP'
elif args.file:
# Use file and interpret port arg as the file
print("Using file '%s'" % port)
description = os.path.split(port)[-1]
mode = 'file'
else:
if args.rtscts:
print("using flow control")
# Use the port passed and assume serial connection
print("Using serial device '%s'" % port)
description = os.path.split(port)[-1]
description += (" @" + str(baud)) if baud else ""
mode = 'serial'
try:
driver = s.get_base_args_driver(args)
except Exception as e: # noqa
connect_error = e
else:
cnx_data = ConnectionData(
driver=driver,
description=description,
mode=mode
)
return (cnx_data, connect_error)
def connection_from_args(args):
cnx_data = None
connect_error = None
description = ''
mode = ''
port = getattr(args, 'port', None)
baud = getattr(args, 'baud', None)
if port is not None:
if args.tcp:
# Use the TPC driver and interpret port arg as host:port
description = port
mode = 'TCP/IP'
elif args.file:
# Use file and interpret port arg as the file
print("Using file '%s'" % port)
description = os.path.split(port)[-1]
mode = 'file'
else:
if args.rtscts:
print("using flow control")
# Use the port passed and assume serial connection
print("Using serial device '%s'" % port)
description = os.path.split(port)[-1]
description += (" @" + str(baud)) if baud else ""
mode = 'serial'
try:
driver = s.get_base_args_driver(args)
except Exception as e: # noqa
connect_error = e
else:
cnx_data = ConnectionData(
driver=driver,
description=description,
mode=mode
)
return (cnx_data, connect_error)
def main():
args = get_args()
selected_driver = serial_link.get_base_args_driver(args)
# Driver with context
with selected_driver as driver:
# Handler with context
with Handler(Framer(driver.read, driver.write, args.verbose)) as link:
f = FileIO(link)
try:
if args.write:
file_data = bytearray(open(args.write[0], 'rb').read())
f.write(raw_filename(args.write[1]), file_data, progress_cb=mk_progress_cb(len(file_data)))
sys.stdout.write("\n")
sys.stdout.flush()
elif args.read:
if len(args.read) not in [1, 2]:
sys.stderr.write("Error: fileio read requires either 1 or 2 arguments, SOURCE and optionally DEST.")
sys.exit(1)
data = f.read(raw_filename(args.read[0]))
if len(args.read) == 2:
with open(args.read[1], ('w' if args.hex else 'wb')) as fd:
fd.write(hexdump(data) if args.hex else data)
elif args.hex:
print(hexdump(data))
else:
print(printable_text_from_device(data))
elif args.delete:
f.remove(raw_filename(args.delete[0]))
elif args.list is not None:
print_dir_listing(f.readdir(raw_filename(args.list[0])))
else:
print("No command given, listing root directory:")
print_dir_listing(f.readdir())
except KeyboardInterrupt:
pass