Exemplo n.º 1
0
def call_subprocess(
    cmd,  # type: Union[List[str], CommandArgs]
    show_stdout=False,  # type: bool
    cwd=None,  # type: Optional[str]
    on_returncode='raise',  # type: str
    extra_ok_returncodes=None,  # type: Optional[Iterable[int]]
    command_desc=None,  # type: Optional[str]
    extra_environ=None,  # type: Optional[Mapping[str, Any]]
    unset_environ=None,  # type: Optional[Iterable[str]]
    spinner=None,  # type: Optional[SpinnerInterface]
    log_failed_cmd=True  # type: Optional[bool]
):
    # type: (...) -> Text
    """
    Args:
      show_stdout: if true, use INFO to log the subprocess's stderr and
        stdout streams.  Otherwise, use DEBUG.  Defaults to False.
      extra_ok_returncodes: an iterable of integer return codes that are
        acceptable, in addition to 0. Defaults to None, which means [].
      unset_environ: an iterable of environment variable names to unset
        prior to calling subprocess.Popen().
      log_failed_cmd: if false, failed commands are not logged, only raised.
    """
    if extra_ok_returncodes is None:
        extra_ok_returncodes = []
    if unset_environ is None:
        unset_environ = []
    # Most places in pip use show_stdout=False. What this means is--
    #
    # - We connect the child's output (combined stderr and stdout) to a
    #   single pipe, which we read.
    # - We log this output to stderr at DEBUG level as it is received.
    # - If DEBUG logging isn't enabled (e.g. if --verbose logging wasn't
    #   requested), then we show a spinner so the user can still see the
    #   subprocess is in progress.
    # - If the subprocess exits with an error, we log the output to stderr
    #   at ERROR level if it hasn't already been displayed to the console
    #   (e.g. if --verbose logging wasn't enabled).  This way we don't log
    #   the output to the console twice.
    #
    # If show_stdout=True, then the above is still done, but with DEBUG
    # replaced by INFO.
    if show_stdout:
        # Then log the subprocess output at INFO level.
        log_subprocess = subprocess_logger.info
        used_level = logging.INFO
    else:
        # Then log the subprocess output using DEBUG.  This also ensures
        # it will be logged to the log file (aka user_log), if enabled.
        log_subprocess = subprocess_logger.debug
        used_level = logging.DEBUG

    # Whether the subprocess will be visible in the console.
    showing_subprocess = subprocess_logger.getEffectiveLevel() <= used_level

    # Only use the spinner if we're not showing the subprocess output
    # and we have a spinner.
    use_spinner = not showing_subprocess and spinner is not None

    if command_desc is None:
        command_desc = format_command_args(cmd)

    log_subprocess("Running command %s", command_desc)
    env = os.environ.copy()
    if extra_environ:
        env.update(extra_environ)
    for name in unset_environ:
        env.pop(name, None)
    try:
        proc = subprocess.Popen(
            # Convert HiddenText objects to the underlying str.
            reveal_command_args(cmd),
            stderr=subprocess.STDOUT,
            stdin=subprocess.PIPE,
            stdout=subprocess.PIPE,
            cwd=cwd,
            env=env,
        )
        proc.stdin.close()
    except Exception as exc:
        if log_failed_cmd:
            subprocess_logger.critical(
                "Error %s while executing command %s",
                exc,
                command_desc,
            )
        raise
    all_output = []
    while True:
        # The "line" value is a unicode string in Python 2.
        line = console_to_str(proc.stdout.readline())
        if not line:
            break
        line = line.rstrip()
        all_output.append(line + '\n')

        # Show the line immediately.
        log_subprocess(line)
        # Update the spinner.
        if use_spinner:
            spinner.spin()
    try:
        proc.wait()
    finally:
        if proc.stdout:
            proc.stdout.close()
    proc_had_error = (proc.returncode
                      and proc.returncode not in extra_ok_returncodes)
    if use_spinner:
        if proc_had_error:
            spinner.finish("error")
        else:
            spinner.finish("done")
    if proc_had_error:
        if on_returncode == 'raise':
            if not showing_subprocess and log_failed_cmd:
                # Then the subprocess streams haven't been logged to the
                # console yet.
                msg = make_subprocess_output_error(
                    cmd_args=cmd,
                    cwd=cwd,
                    lines=all_output,
                    exit_status=proc.returncode,
                )
                subprocess_logger.error(msg)
            exc_msg = ('Command errored out with exit status {}: {} '
                       'Check the logs for full command output.').format(
                           proc.returncode, command_desc)
            raise InstallationError(exc_msg)
        elif on_returncode == 'warn':
            subprocess_logger.warning(
                'Command "%s" had error code %s in %s',
                command_desc,
                proc.returncode,
                cwd,
            )
        elif on_returncode == 'ignore':
            pass
        else:
            raise ValueError('Invalid value: on_returncode=%s' %
                             repr(on_returncode))
    return ''.join(all_output)
Exemplo n.º 2
0
def call_subprocess(
        cmd,  # type: Union[List[str], CommandArgs]
        show_stdout=False,  # type: bool
        cwd=None,  # type: Optional[str]
        on_returncode="raise",  # type: str
        extra_ok_returncodes=None,  # type: Optional[Iterable[int]]
        command_desc=None,  # type: Optional[str]
        extra_environ=None,  # type: Optional[Mapping[str, Any]]
        unset_environ=None,  # type: Optional[Iterable[str]]
        spinner=None,  # type: Optional[SpinnerInterface]
        log_failed_cmd=True,  # type: Optional[bool]
        stdout_only=False,  # type: Optional[bool]
):
    # type: (...) -> str
    """
    Args:
      show_stdout: if true, use INFO to log the subprocess's stderr and
        stdout streams.  Otherwise, use DEBUG.  Defaults to False.
      extra_ok_returncodes: an iterable of integer return codes that are
        acceptable, in addition to 0. Defaults to None, which means [].
      unset_environ: an iterable of environment variable names to unset
        prior to calling subprocess.Popen().
      log_failed_cmd: if false, failed commands are not logged, only raised.
      stdout_only: if true, return only stdout, else return both. When true,
        logging of both stdout and stderr occurs when the subprocess has
        terminated, else logging occurs as subprocess output is produced.
    """
    if extra_ok_returncodes is None:
        extra_ok_returncodes = []
    if unset_environ is None:
        unset_environ = []
    # Most places in pip use show_stdout=False. What this means is--
    #
    # - We connect the child's output (combined stderr and stdout) to a
    #   single pipe, which we read.
    # - We log this output to stderr at DEBUG level as it is received.
    # - If DEBUG logging isn't enabled (e.g. if --verbose logging wasn't
    #   requested), then we show a spinner so the user can still see the
    #   subprocess is in progress.
    # - If the subprocess exits with an error, we log the output to stderr
    #   at ERROR level if it hasn't already been displayed to the console
    #   (e.g. if --verbose logging wasn't enabled).  This way we don't log
    #   the output to the console twice.
    #
    # If show_stdout=True, then the above is still done, but with DEBUG
    # replaced by INFO.
    if show_stdout:
        # Then log the subprocess output at INFO level.
        log_subprocess = subprocess_logger.info
        used_level = logging.INFO
    else:
        # Then log the subprocess output using VERBOSE.  This also ensures
        # it will be logged to the log file (aka user_log), if enabled.
        log_subprocess = subprocess_logger.verbose
        used_level = VERBOSE

    # Whether the subprocess will be visible in the console.
    showing_subprocess = subprocess_logger.getEffectiveLevel() <= used_level

    # Only use the spinner if we're not showing the subprocess output
    # and we have a spinner.
    use_spinner = not showing_subprocess and spinner is not None

    if command_desc is None:
        command_desc = format_command_args(cmd)

    log_subprocess("Running command %s", command_desc)
    env = os.environ.copy()
    if extra_environ:
        env.update(extra_environ)
    for name in unset_environ:
        env.pop(name, None)
    try:
        proc = subprocess.Popen(
            # Convert HiddenText objects to the underlying str.
            reveal_command_args(cmd),
            stdin=subprocess.PIPE,
            stdout=subprocess.PIPE,
            stderr=subprocess.STDOUT if not stdout_only else subprocess.PIPE,
            cwd=cwd,
            env=env,
            errors="backslashreplace",
        )
    except Exception as exc:
        if log_failed_cmd:
            subprocess_logger.critical(
                "Error %s while executing command %s",
                exc,
                command_desc,
            )
        raise
    all_output = []
    if not stdout_only:
        assert proc.stdout
        assert proc.stdin
        proc.stdin.close()
        # In this mode, stdout and stderr are in the same pipe.
        while True:
            line = proc.stdout.readline()  # type: str
            if not line:
                break
            line = line.rstrip()
            all_output.append(line + "\n")

            # Show the line immediately.
            log_subprocess(line)
            # Update the spinner.
            if use_spinner:
                assert spinner
                spinner.spin()
        try:
            proc.wait()
        finally:
            if proc.stdout:
                proc.stdout.close()
        output = "".join(all_output)
    else:
        # In this mode, stdout and stderr are in different pipes.
        # We must use communicate() which is the only safe way to read both.
        out, err = proc.communicate()
        # log line by line to preserve pip log indenting
        for out_line in out.splitlines():
            log_subprocess(out_line)
        all_output.append(out)
        for err_line in err.splitlines():
            log_subprocess(err_line)
        all_output.append(err)
        output = out

    proc_had_error = proc.returncode and proc.returncode not in extra_ok_returncodes
    if use_spinner:
        assert spinner
        if proc_had_error:
            spinner.finish("error")
        else:
            spinner.finish("done")
    if proc_had_error:
        if on_returncode == "raise":
            if not showing_subprocess and log_failed_cmd:
                # Then the subprocess streams haven't been logged to the
                # console yet.
                msg = make_subprocess_output_error(
                    cmd_args=cmd,
                    cwd=cwd,
                    lines=all_output,
                    exit_status=proc.returncode,
                )
                subprocess_logger.error(msg)
            raise InstallationSubprocessError(proc.returncode, command_desc)
        elif on_returncode == "warn":
            subprocess_logger.warning(
                'Command "%s" had error code %s in %s',
                command_desc,
                proc.returncode,
                cwd,
            )
        elif on_returncode == "ignore":
            pass
        else:
            raise ValueError(f"Invalid value: on_returncode={on_returncode!r}")
    return output