def stem_example_rtp(self):
""" an example used in the tests below, a main stem with laterals """
self.plant = pb.Organism(
) # store organism (not owned by Organ, or OrganRandomParameter)
p0 = pb.StemRandomParameter(self.plant)
p0.name, p0.subType, p0.la, p0.lb, p0.lmax, p0.ln, p0.r, p0.dx = "main", 1, 1, 10, 100, (
89. / 19.), 1, 0.5
p0.successor = [3]
p0.successorP = [1.]
p1 = pb.StemRandomParameter(self.plant)
p1.name, p1.subType, p1.la, p1.ln, p1.r, p1.dx = "lateral", 3, 25, 0, 2, 0.1
self.p0, self.p1 = p0, p1 # needed at later point
self.plant.setOrganRandomParameter(
p0) # the organism manages the type parameters and takes ownership
self.plant.setOrganRandomParameter(p1)
# TODO (first node is not set, if seed is used)
self.plant.setOrganRandomParameter(pb.SeedRandomParameter(self.plant))
self.seed = pb.Seed(
self.plant) # store parent (not owned by child Organ)
#
param0 = p0.realize() # set up stem by hand (without a stem system)
param0.la, param0.lb = 0, 0 # its important parent has zero length, otherwise creation times are messed up
parentstem = pb.Stem(1, param0, True, True, 0., 0.,
pb.Vector3d(0, 0, -1), 0, 0, False,
0) # takes ownership of param0
parentstem.setOrganism(self.plant)
parentstem.addNode(pb.Vector3d(0, 0, -3),
0) # there is no nullptr in Python
self.parentstem = parentstem # store parent (not owned by child Organ)
#
self.stem = pb.Stem(self.plant, p0.subType, pb.Vector3d(0, 0, -1), 0,
self.parentstem, 0, 0)
self.stem.setOrganism(self.plant)
def test_leaf(self):
""" leaf without lateral leafs """
ons = pb.Matrix3d(pb.Vector3d(0., 0., 1.), pb.Vector3d(0., 1., 0.), pb.Vector3d(1., 0., 0.))
plant = pb.Plant() # store organism (not owned by Organ, or OrganRandomParameter)
p0 = pb.LeafRandomParameter(plant)
p0.name, p0.subType, p0.la, p0.lb, p0.lmax, p0.ln, p0.r, p0.dx = "leaf", 1, 3.5, 1., 7.5, 3, 1, 0.1
phi = np.array([-90, -45, 0., 45, 90]) / 180. * np.pi
l = np.array([3, 2.2, 1.7, 2, 3.5])
N = 100 # N is rather high for testing
p0.createLeafRadialGeometry(phi, l, N)
# y = np.array([-3, -3 * 0.7, 0., 3.5 * 0.7, 3.5])
# l = np.array([0., 2.2 * 0.7, 1.7, 1.8 * 0.7, 0.])
# N = 105 # N is rather high for testing
# p0.createLeafGeometry(y, l, N)
plant.setOrganRandomParameter(p0) # the organism manages the type parameters and takes ownership
plant.setOrganRandomParameter(pb.SeedRandomParameter(plant))
# because we cannot pass a nullptr to pb.Leaf(...) L48
param0 = p0.realize() # set up leaf by hand (without a leaf syleaf)
param0.la, param0.lb = 0, 0 # its important parent has zero length, otherwise creation times are messed up
parentleaf = pb.Leaf(1, param0, True, True, 0., 0., ons, 0, False, 0) # takes ownership of param0
parentleaf.setOrganism(plant)
parentleaf.addNode(pb.Vector3d(0, 0, -3), 0) # there is no nullptr in Python
leaf = pb.Leaf(plant, p0.subType, ons, 0, parentleaf , 0)
leaf.setOrganism(plant)
leaf.simulate(7)
vp.plot_leaf(leaf)
def test_constructors(self):
""" tests two kinds of constructors and copy"""
self.root_example_rrp()
# 1. constructor from scratch
param = self.p0.realize()
root = pb.Root(1, param, True, True, 0., 0., pb.Vector3d(0, 0, -1), 0,
0, False, 0)
root.setOrganism(self.plant)
root.addNode(pb.Vector3d(0, 0, -3),
0) # parent must have at least one nodes
# 2. used in simulation (must have parent, since there is no nullptr in Pyhton)
root2 = pb.Root(self.plant, self.p1.subType, pb.Vector3d(0, 0, -1), 0,
root, 0, 0)
root.addChild(root2)
# 3. deep copy (with a factory function)
plant2 = pb.Organism()
root3 = root.copy(plant2)
self.assertEqual(
str(root), str(root3),
"deep copy: the root string representations shold be equal")
self.assertIsNot(root.getParam(), root3.getParam(),
"deep copy: roots have same specific parameter set"
) # type OrganSpecificParameter
self.assertEqual(str(root.param()), str(root3.param()),
"deep copy: roots have different parameter values"
) # type RootSpecificParameter
def root_example_rrp(self):
""" an example used in the tests below, a main root with laterals """
self.plant = pb.Organism(
) # store organism (not owned by Organ, or OrganRandomParameter)
p0 = pb.RootRandomParameter(self.plant)
p0.name, p0.subType, p0.la, p0.lb, p0.lmax, p0.ln, p0.r, p0.dx = "taproot", 1, 10., 1., 100., 1., 1.5, 0.5
p0.successor = [2]
p0.successorP = [1.]
p1 = pb.RootRandomParameter(self.plant)
p1.name, p1.subType, p1.lmax, p1.r, p1.dx = "lateral", 2, 25., 2., 0.1
self.p0, self.p1 = p0, p1 # needed at later point
self.plant.setOrganRandomParameter(
p0) # the organism manages the type parameters and takes ownership
self.plant.setOrganRandomParameter(p1)
srp = pb.SeedRandomParameter(self.plant)
self.plant.setOrganRandomParameter(srp)
param0 = p0.realize() # set up root by hand (without a root system)
param0.la, param0.lb = 0, 0 # its important parent has zero length, otherwise creation times are messed up
parentroot = pb.Root(1, param0, True, True, 0., 0.,
pb.Vector3d(0, 0, -1), 0, 0, False,
0) # takes ownership of param0
parentroot.setOrganism(self.plant)
parentroot.addNode(pb.Vector3d(0, 0, -3),
0) # there is no nullptr in Python
self.parentroot = parentroot # store parent (not owned by child Organ)
self.root = pb.Root(self.plant, p0.subType, pb.Vector3d(0, 0, -1), 0,
self.parentroot, 0, 0)
self.root.setOrganism(self.plant)
def test_sequential(self):
""" tests if the the organ tree can be represented in a seqential list"""
self.hand_example()
self.add_nodes() # only organs with number of nodes > 1 are considered
ring = pb.Organ(self.human1, self.thumb, 0, 0, 4, self.ons, 0) # add a ring to the thumb
self.thumb.addChild(ring)
ring.addNode(pb.Vector3d(0, -1, 1.6), self.thumb.getNodeId(1), 4)
ring.addNode(pb.Vector3d(0, -1, 1.6), 4)
organs = self.hand.getOrgans()
def hand_example(self):
""" an example used in the tests below, a hand with two fingers """
self.human1 = pb.Organism() # same example as in test_constructor ...
otp = pb.OrganRandomParameter(self.human1)
self.human1.setOrganRandomParameter(otp)
op = otp.realize()
self.hand = pb.Organ(self.human1.getOrganIndex(), op, True, True, 0, 15., pb.Vector3d(0., 0., 1.), 0., 0, False, 0)
self.hand.setOrganism(self.human1)
self.thumb = pb.Organ(self.human1, self.hand, 0, 0, 4, pb.Vector3d(0., 0., 1.), 0., 0) # delayedfor 4 days
self.little_finger = pb.Organ(self.human1, self.hand, 0, 0, 3, pb.Vector3d(0., 0., 1.), 0., 0) # delayed for 3 days
self.hand.addChild(self.thumb)
def read_rsml(file_name:str, verbose=True):
""" reads an RSML file and converts to MappedSegments with units [cm]
@file_name the file name of the rsml, including file extension (e.g. "test.rsml" )
@return a CPlantBox MappedSegments object
"""
polylines, props, funcs = rsml.read_rsml(file_name)
bn = 0 # count base roots
for i, _ in enumerate(polylines):
if props["parent-poly"][i] < 0:
bn += 1
if bn > 1:
polylines, props, funcs = rsml.artificial_shoot(polylines, props, funcs)
if verbose:
print("XylemFluxPython.read_rsml: added an artificial shoot")
nodes, segs = rsml.get_segments(polylines, props)
radii, seg_ct, types = rsml.get_parameter(polylines, funcs, props)
if verbose:
print("XylemFluxPython.read_rsml: read rsml with", len(nodes), "nodes and", len(segs), "segments")
nodes = np.array(nodes) # for slicing in the plots
nodes2 = [] # Conversions...
for n in nodes:
nodes2.append(pb.Vector3d(n[0] , n[1] , n[2]))
segs2 = []
nodeCTs = np.zeros((len(nodes), 1)) # we need node creation times
for i, s in enumerate(segs):
nodeCTs[s[1]] = seg_ct[i]
segs2.append(pb.Vector2i(int(s[0]), int(s[1])))
radii = np.array(radii)
types = np.array(types, dtype=np.int64) - 1 # index must start with 0
if verbose:
print(" nodeCTs [{:g}, {:g}] days".format(np.min(nodeCTs), np.max(nodeCTs)))
print(" raddii [{:g}, {:g}] cm".format(np.min(radii), np.max(radii)))
print(" subTypes [{:g}, {:g}] ".format(np.min(types), np.max(types)))
return pb.MappedSegments(nodes2, nodeCTs, segs2, radii, types) # root system grid
def convert_to_xylem_flux_(self):
""" converts the polylines to a SegmentAnalyser and a MappedSegments object, and stores max_ct
uses:
properties["parent-poly"], properties["parent-nodes"]
radii, cts, types
"""
nodes, segs = rsml_reader.get_segments(self.polylines, self.properties) # fetch nodes and segments
segRadii = np.zeros((segs.shape[0], 1)) # convert to paramter per segment
segCTs = np.zeros((segs.shape[0], 1))
subTypes = np.zeros((segs.shape[0], 1))
for i, s in enumerate(segs):
segRadii[i] = self.radii[s[1]] # seg to node index
segCTs[i] = self.cts[s[1]]
subTypes[i] = self.types[s[1]]
if np.isnan(subTypes[0]):
subTypes = np.ones((len(segs),), dtype=np.int64)
segs_ = [pb.Vector2i(s[0], s[1]) for s in segs] # convert to CPlantBox types
nodes_ = [pb.Vector3d(n[0], n[1], n[2]) for n in nodes]
self.analyser = pb.SegmentAnalyser(nodes_, segs_, segCTs, segRadii)
self.analyser.addData("subType", subTypes)
ms = pb.MappedSegments(self.analyser.nodes, np.array(self.cts), segs_, np.array(segRadii), np.array(subTypes))
self.xylem_flux = xylem_flux.XylemFluxPython(ms)
self.base_nodes = self.get_base_node_indices_()
self.xylem_flux.neumann_ind = self.base_nodes # needed for suf
self.xylem_flux.dirichlet_ind = self.base_nodes # needed for krs
self.base_segs = self.xylem_flux.find_base_segments()
def test_dynamics(self):
""" tests if nodes created in last time step are correct """ #
self.hand_example()
self.hand.simulate(1)
self.add_nodes()
n0 = self.hand.getNumberOfNodes() - self.hand.getOldNumberOfNodes()
n1 = self.little_finger.getNumberOfNodes() - self.little_finger.getOldNumberOfNodes()
n2 = self.thumb.getNumberOfNodes() - self.thumb.getOldNumberOfNodes()
self.assertEqual(n0, 4, "wrong number of new nodes")
self.assertEqual(n1, 2, "wrong number of new nodes")
self.assertEqual(n2, 2, "wrong number of new nodes")
self.hand.simulate(1)
n0 = self.hand.getNumberOfNodes() - self.hand.getOldNumberOfNodes()
n1 = self.little_finger.getNumberOfNodes() - self.little_finger.getOldNumberOfNodes()
n2 = self.thumb.getNumberOfNodes() - self.thumb.getOldNumberOfNodes()
self.assertEqual(n0, 0, "wrong number of new nodes")
self.assertEqual(n1, 0, "wrong number of new nodes")
self.assertEqual(n2, 0, "wrong number of new nodes")
self.hand.simulate(1)
self.little_finger.addNode(pb.Vector3d(0, 1, 1.6), 6)
n0 = self.hand.getNumberOfNodes() - self.hand.getOldNumberOfNodes()
n1 = self.little_finger.getNumberOfNodes() - self.little_finger.getOldNumberOfNodes()
n2 = self.thumb.getNumberOfNodes() - self.thumb.getOldNumberOfNodes()
self.assertEqual(n0, 0, "wrong number of new nodes")
self.assertEqual(n1, 1, "wrong number of new nodes")
def root_example_rrp2(self):
""" an example used in the tests below, a main root with laterals """
self.plant = pb.RootSystem(
) # store organism (not owned by Organ, or OrganRandomParameter)
p0 = pb.RootRandomParameter(self.plant)
p0.name, p0.subType, p0.la, p0.lb, p0.lmax, p0.ln, p0.lnk, p0.r, p0.dx, p0.dxMin = "taproot", 1, 0.95, 0.8, 10., 1.05, 0.01, 0.8, 0.25, 0.2
p0.successor = [2]
p0.successorP = [1.]
p1 = pb.RootRandomParameter(self.plant)
p1.name, p1.subType, p1.lmax, p1.r, p1.dx = "lateral", 2, 2., 2., 2.
self.plant.setOrganRandomParameter(
p0) # the organism manages the type parameters and takes ownership
self.plant.setOrganRandomParameter(p1)
srp = pb.SeedRandomParameter(self.plant)
self.plant.setOrganRandomParameter(srp)
print("root p0, initial parameters: lmax = ", p0.lmax, ", lb = ",
p0.lb, ", la = ", p0.la, ", ln = ", p0.ln)
param0 = p0.realize() # set up root by hand (without a root system)
print("root p0, realized parameters: lmax = ",
sum((sum(param0.ln), param0.lb, param0.la)), ", lb = ",
param0.lb, ", la = ", param0.la, ", mean ln = ",
np.mean(param0.ln))
if ((param0.lb % p0.dx > 0) and (param0.lb % p0.dx < p0.dxMin * 0.99)):
print("lb value does not fit with dx and dxMin")
print(param0.lb % p0.dx)
if ((param0.la % p0.dx > 0) and (param0.la % p0.dx < p0.dxMin * 0.99)):
print("la value does not fit with dx and dxMin")
print(param0.la % p0.dx)
if (any([(lni % p0.dx > 0 and lni % p0.dx < p0.dxMin * 0.99)
for lni in param0.ln])):
print("ln value does not fit with dx and dxMin")
param0.la, param0.lb = 0, 0 # its important parent has zero length, otherwise creation times are messed up
parentroot = pb.Root(1, param0, True, True, 0., 0.,
pb.Vector3d(0, 0, -1), 0, 0, False,
0) # takes ownership of param0
parentroot.setOrganism(self.plant)
parentroot.addNode(pb.Vector3d(0, 0, -1),
0) # there is no nullptr in Python
self.parentroot = parentroot # store parent (not owned by child Organ)
self.root = pb.Root(self.plant, p0.subType, pb.Vector3d(0, 0, -1), 0,
self.parentroot, 0, 0)
self.root.setOrganism(self.plant)
self.p0 = p0
def read_rsml(file_name: str):
"""
Reads an RSML file and converts to MappedSegments with units [cm]
"""
polylines, props, funcs = rsml.read_rsml(file_name)
assert len(polylines) == len(
props['parent-poly']
), "XylemFluxPython.read_rsml: wrong number of parent-poly tags"
if not 'parent-node' in props: # reconstruct...
print("parse_rsml: no parent-node tag found, reconstructing...")
props['parent-node'] = []
for i in range(0, len(polylines)):
if props['parent-poly'][i] >= 0:
pni = XylemFluxPython.connect(
np.array(polylines[i][0]),
polylines[props['parent-poly'][i]])
else:
pni = -1
# print("parent", props['parent-poly'][i], "pni", pni)
props['parent-node'].append(pni)
assert len(polylines) == len(
props['parent-node']
), "XylemFluxPython.read_rsml: wrong number of parent-node tags"
nodes, segs = rsml.get_segments(polylines, props)
print("Read rsml:", len(nodes), "segs", len(segs), "segs")
nodes2 = [pb.Vector3d(n[0], n[1], n[2])
for n in nodes] # convert to plantbox types
segs2 = [pb.Vector2i(int(s[0]), int(s[1])) for s in segs]
radii_, nodeCTs_, types_ = [], [], []
for i, p in enumerate(polylines):
for j in range(0, len(p)):
if 'diameter' in funcs:
radii_.append(funcs['diameter'][i][j] / 2)
else:
print("XylemFluxPython.read_rsml: no diameter tag found")
radii_.append(0.)
if 'emergence_time' in funcs:
nodeCTs_.append(funcs['emergence_time'][i][j])
else:
print(
"XylemFluxPython.read_rsml: no emergence_time tag found"
)
nodeCTs_.append(0.)
if 'type' in funcs:
types_.append(funcs["type"][i][j])
elif 'type' in props:
types_.append(props["type"][i])
else:
print("XylemFluxPython.read_rsml: no type tag found")
types_.append(0)
nodeCTs = np.array(nodeCTs_) # creation times per node
radii = np.zeros((len(segs), 1)) # radii per segment
types = np.ones((len(segs), 1), dtype=np.int64) # types per semgent
for i, s in enumerate(segs):
radii[i] = radii_[s[1]]
types[i] = types_[s[1]] - 1 # index must start with 0
return pb.MappedSegments(nodes2, nodeCTs, segs2, radii,
types) # root system grid
def add_nodes(self):
""" used in the tests below, adds nodes to the hand example """
self.hand.addNode(pb.Vector3d(0, 0, 0), 0)
self.hand.addNode(pb.Vector3d(0, 0, 1.5), 0)
self.hand.addNode(pb.Vector3d(0, -1, 1.6), 0) # thumb
self.hand.addNode(pb.Vector3d(0, 1, 1.6), 0) # little finger
thumb = self.hand.getNodeId(2)
lf = self.hand.getNodeId(3)
self.thumb.addNode(pb.Vector3d(0, -1, 1.6), thumb, 4)
self.thumb.addNode(pb.Vector3d(0, -2, 2.5), 4)
self.little_finger.addNode(pb.Vector3d(0, 1, 1.6), lf, 3)
self.little_finger.addNode(pb.Vector3d(0, 1.7, 2.5), 3)
def test_constructors(self):
""" tests two kinds of constructors and copy"""
self.stem_example_rtp()
# 1. constructor from scratch
param = self.p0.realize()
stem = pb.Stem(1, param, True, True, 0., 0., pb.Vector3d(0, 0, -1), 0,
0, False, 0)
stem.setOrganism(self.plant)
stem.addNode(pb.Vector3d(0, 0, -3),
0) # parent must have at least one nodes
# 2. used in simulation (must have parent, since there is no nullptr in Pyhton)
stem2 = pb.Stem(self.plant, self.p1.subType, pb.Vector3d(0, 0, -1), 0,
stem, 0, 0)
stem.addChild(stem2)
# 3. deep copy (with a factory function)
plant2 = pb.Organism()
stem3 = stem.copy(plant2)
self.assertEqual(str(stem), str(stem3),
"deep copy: the organs shold be equal")
self.assertIsNot(stem.getParam(), stem3.getParam(),
"deep copy: organs have same parameter set")
def test_constructors(self):
""" tests three different kinds of constructors """
human1 = pb.Organism()
otp = pb.OrganRandomParameter(human1)
human1.setOrganRandomParameter(otp)
op = otp.realize()
# 1. constructor from scratch
hand = pb.Organ(human1.getOrganIndex(), op, True, True, 0., 15., pb.Vector3d(0., 0., 1.), 0., 0, False, 0)
hand.setOrganism(human1)
# 2. used in simulation (must have parent, since there is no nullptr in Pyhton)
thumb = pb.Organ(human1, hand, 0, 0, 4, pb.Vector3d(0., 0., 1.), 0., 0)
little_finger = pb.Organ(human1, hand, 0, 0, 3, pb.Vector3d(0., 0., 1.), 0., 0)
hand.addChild(thumb)
hand.addChild(little_finger)
# 3. deep copy (with a factory function)
human2 = pb.Organism()
human2.setOrganRandomParameter(otp.copy(human2))
hand2 = hand.copy(human2)
self.assertEqual(str(hand), str(hand2), "deep copy: the organs should be equal")
self.assertIsNot(hand.getParam(), hand2.getParam(), "deep copy: organs have same parameter set")
self.assertEqual(str(hand.getParam()), str(hand2.getParam()), "deep copy: the different parameter set values")
self.assertEqual(str(hand.getOrganRandomParameter()), str(hand2.getOrganRandomParameter()), "deep copy: the different random parameter set values")
def stem_example_rtp(self, phytomereGrowth = "sequential"):
""" an example used in the tests below, a main stem with laterals """
self.plant = pb.Plant() # store organism (not owned by Organ, or OrganRandomParameter)
p0 = pb.StemRandomParameter(self.plant)
p0.name, p0.subType, p0.la, p0.lb, p0.lmax, p0.ln, p0.r, p0.dx, p0.dxMin = "main", 1, 10., 10., 100., 1., 1.5, 1, 0.5
p0.delayLat = 1.
p0.delayNG = 2.
p0.successor = [5]
p0.successorP = [1.]
if phytomereGrowth == "sequential":
p0.nodalGrowth = 0
if phytomereGrowth == "equal":
p0.nodalGrowth = 1
p1 = pb.StemRandomParameter(self.plant)
p1.name, p1.subType, p1.lmax, p1.r, p1.dx, p1.dxMin = "lateral", 5, 5., 2., 1, 0.5
self.p0, self.p1 = p0, p1 # needed at later point
self.plant.setOrganRandomParameter(p0) # the organism manages the type parameters and takes ownership
self.plant.setOrganRandomParameter(p1)
srp = pb.SeedRandomParameter(self.plant)
self.plant.setOrganRandomParameter(srp)
# creates seed organ (otherwise throws error in plant::simulate())
# test == True => no need to give root parameter
self.plant.initialize(verbose = False, test = True)
param0 = p0.realize() # set up stem by hand (without a stem system)
param0.la, param0.lb = 0, 0 # its important parent has zero length, otherwise creation times are messed up
self.ons = pb.Matrix3d(pb.Vector3d(0., 0., 1.), pb.Vector3d(0., 1., 0.), pb.Vector3d(1., 0., 0.))
parentstem = pb.Stem(1, param0, True, True, 0., 0., self.ons, 0, False, 0) # takes ownership of param0
parentstem.setOrganism(self.plant)
parentstem.addNode(pb.Vector3d(0, 0, -3), 0) # there is no nullptr in Python
self.parentstem = parentstem # store parent (not owned by child Organ)
self.stem = pb.Stem(self.plant, p0.subType, self.ons, 0, self.parentstem , 0)
self.stem.setOrganism(self.plant)
def soil_cores(x :list, y :list, r :float, h :float):
"""
A lsit of soil core geometries with a fixed location in the field
@param x x coordinates of the soil cores (cm)
@param y y coordinates of the soil cores (cm)
@param r radius of the soil core (cm)
@param h height of the soil core (cm)
"""
assert len(x) == len(y), "coordinate length must be equal"
core = pb.SDF_PlantContainer(r, r, h, False)
cores = []
for i in range(0, len(x)):
cores.append(pb.SDF_RotateTranslate(core, 0., pb.SDF_Axis.xaxis, pb.Vector3d(x[i], y[i], 0.))) # just translate
return cores;
def get_srp(self):
self.plant = pb.Organism() # need to store this
srp = pb.SeedRandomParameter(self.plant)
srp.seedPos = pb.Vector3d(0, 0, -2)
srp.firstB = 3 # basal
srp.delayB = 5
srp.maxB = 7
srp.nC = 7
srp.firstSB = 30 # shoot borne
srp.delaySB = 10
srp.delayRC = 70
srp.nz = 0.7
srp.maxTil = 3 # stem
srp.simtime = 10
self.plant.setOrganRandomParameter(srp)
return srp
def initialize_root_systems(N :int, M :int, distN :float, distM :float):
"""
Initializes M*N root systems
@param N number of rows
@param M number of columns
@param distN distance between rows
@param distM distance between columns
@return a list of initialized root systems
"""
allRS = []
for i in range(0, N):
for j in range(0, M):
rs = pb.RootSystem()
rs.readParameters(path + name + ".xml")
rs.getRootSystemParameter().seedPos = pb.Vector3d(distN * i, distM * j, -3.) # cm
rs.initialize(False) # verbose = False
allRS.append(rs)
return allRS
def read_rsml(file_name: str, verbose=True):
""" reads an RSML file and converts to MappedSegments with units [cm]
@file_name the file name of the rsml, including file extension (e.g. "test.rsml" )
@return a CPlantBox MappedSegments object
"""
polylines, props, funcs, _ = rsml.read_rsml(file_name)
bn = 0 # count base roots
for i, _ in enumerate(polylines):
if props["parent-poly"][i] < 0:
bn += 1
if bn > 1:
rsml.artificial_shoot(polylines, props, funcs)
if verbose:
print("XylemFluxPython.read_rsml: added an artificial shoot")
nodes, segs = rsml.get_segments(polylines, props)
if verbose:
print("XylemFluxPython.read_rsml: read rsml with", len(nodes),
"nodes and", len(segs), "segments")
nodes2 = [pb.Vector3d(n[0], n[1], n[2])
for n in nodes] # Conversions to PlantBox types
segs2 = [pb.Vector2i(int(s[0]), int(s[1])) for s in segs]
radii, cts, types, tag_names = rsml.get_parameter(
polylines, funcs, props)
segRadii = np.zeros(
(segs.shape[0], 1)) # convert to paramter per segment
segTypes = np.zeros((segs.shape[0], 1))
for i, s in enumerate(segs):
segRadii[i] = radii[s[1]] # seg to node index
segTypes[i] = types[s[1]]
if verbose:
print(" cts [{:g}, {:g}] days".format(
np.min(cts), np.max(cts)))
print(" raddii [{:g}, {:g}] cm".format(
np.min(radii), np.max(radii)))
print(" subTypes [{:g}, {:g}] ".format(
np.min(types), np.max(types)))
print()
return pb.MappedSegments(nodes2, cts, segs2, segRadii,
segTypes) # root system grid
def rs_example_rtp(self):
""" an example used in some of the tests below, 100 basals with laterals """
self.rs = pb.RootSystem()
srp = pb.SeedRandomParameter(self.rs)
srp.subType = 0
srp.seedPos = pb.Vector3d(0., 0., -3.)
srp.maxB = 100
srp.firstB = 10
srp.delayB = 3
self.rs.setRootSystemParameter(srp)
p0 = pb.RootRandomParameter(self.rs)
p0.name, p0.subType, p0.la, p0.lmax, p0.ln, p0.r, p0.dx = "taproot", 1, 10, 101, 89. / 19., 1, 0.5
p0.lb = 2
p0.successor = [2]
p0.successorP = [1.]
p1 = pb.RootRandomParameter(self.rs)
p1.name, p1.subType, p1.la, p1.ln, p1.r, p1.dx = "lateral", 2, 25, 0, 2, 0.1
self.p0, self.p1, self.srp = p0, p1, srp # Python will garbage collect them away, if not stored
self.rs.setOrganRandomParameter(p0) # the organism manages the type parameters
self.rs.setOrganRandomParameter(p1)
def read_rsml(file_name: str):
"""
Reads an RSML file and converts to MappedSegments with units [cm]
"""
polylines, props, funcs = rsml.read_rsml(file_name)
nodes, segs = rsml.get_segments(polylines, props)
radii, seg_ct, types = rsml.get_parameter(polylines, funcs, props)
print("Read rsml:", len(nodes), "nodes", len(radii), "radii")
nodes = np.array(nodes) # for slicing in the plots
nodes2 = [] # Conversions...
for n in nodes:
nodes2.append(pb.Vector3d(n[0], n[1], n[2]))
segs2 = []
nodeCTs = np.zeros((len(nodes), 1)) # we need node creation times
for i, s in enumerate(segs):
nodeCTs[s[1]] = seg_ct[i]
segs2.append(pb.Vector2i(int(s[0]), int(s[1])))
radii = np.array(radii)
types = np.array(types, dtype=np.int64) - 1 # index must start with 0
return pb.MappedSegments(nodes2, nodeCTs, segs2, radii,
types) # root system grid
TairK = TairC + 273.15
es = 0.61078 * math.exp(17.27 * TairC / (TairC + 237.3))
ea = es * RH
VPD = es - ea
# root system
pl = pb.MappedPlant() #pb.MappedRootSystem() #pb.MappedPlant()
path = "../../../modelparameter/plant/" #"../../../modelparameter/rootsystem/"
name = "manyleaves" #"Anagallis_femina_Leitner_2010" # Zea_mays_1_Leitner_2010
pl.readParameters(path + name + ".xml")
""" soil """
min_ = np.array([-5, -5, -15])
max_ = np.array([9, 4, 0])
res_ = np.array([5, 5, 5])
pl.setRectangularGrid(pb.Vector3d(min_), pb.Vector3d(max_), pb.Vector3d(res_),
True) # cut and map segments
pl.initialize()
pl.simulate(simtime, False)
#rs.simulate(simtime, False) #test to see if works in case of several simulate
r = Leuning(pl)
nodes = r.get_nodes()
tiproots, tipstem, tipleaf = r.get_organ_nodes_tips(
) #end node of end segment of each organ
node_tips = np.concatenate((tiproots, tipstem, tipleaf))
tiproots, tipstem, tipleaf = r.get_organ_segments_tips(
) #end segment of each organ
seg_tips = np.concatenate((tiproots, tipstem, tipleaf))
rs = pb.MappedRootSystem()
rs.readParameters(path + name + ".xml")
if not periodic:
sdf = pb.SDF_PlantBox(0.99 * (max_b[0] - min_b[0]),
0.99 * (max_b[1] - min_b[1]), max_b[2] - min_b[2])
else:
sdf = pb.SDF_PlantBox(np.Inf, np.Inf, max_b[2] - min_b[2])
rs.setGeometry(sdf)
rs.initialize()
rs.simulate(rs_age, False)
r = XylemFluxPython(rs)
init_conductivities(r, age_dependent)
""" Coupling (map indices) """
picker = lambda x, y, z: s.pick([x, y, z])
r.rs.setSoilGrid(picker) # maps segments
r.rs.setRectangularGrid(pb.Vector3d(min_b), pb.Vector3d(max_b),
pb.Vector3d(cell_number), True)
r.test() # sanity checks
nodes = r.get_nodes()
cci = picker(nodes[0, 0], nodes[0, 1], nodes[0, 2]) # collar cell index
""" Numerical solution """
start_time = timeit.default_timer()
x_, y_ = [], []
sx = s.getSolutionHead() # inital condition, solverbase.py
N = round(sim_time / dt)
t = 0.
for i in range(0, N):
rx = r.solve(rs_age + t, -trans * sinusoidal(t), sx[cci], sx, True,
wilting_point) # xylem_flux.py
"""scales insertion angle"""
import sys
sys.path.append("../../..")
import numpy as np
import plantbox as pb
import vtk_plot as vp
rs = pb.RootSystem()
path = "../../../modelparameter/rootsystem/"
name = "Anagallis_femina_Leitner_2010"
rs.readParameters(path + name + ".xml")
# box with a left and a right compartment for analysis
sideBox = pb.SDF_PlantBox(10, 20, 50)
left = pb.SDF_RotateTranslate(sideBox, pb.Vector3d(-4.99, 0, 0))
right = pb.SDF_RotateTranslate(sideBox, pb.Vector3d(4.99, 0, 0))
leftright = pb.SDF_Union(left, right)
rs.setGeometry(leftright)
# left compartment has a minimum of 0.01, 1 elsewhere
maxS = 1. # maximal
minS = 0.1 # minimal
slope = 1. # [cm] linear gradient between min and max
leftC = pb.SDF_Complement(left)
soilprop = pb.SoilLookUpSDF(leftC, maxS, minS, slope)
# Manually set scaling function and tropism parameters
sigma = [0.4, 1., 1., 1., 1.] * 2
for p in rs.getRootRandomParameter():
if p.subType > 2:
p.dx = 0.25 # adjust resolution
rs.readParameters(path + name + ".xml")
# Manually set tropism to hydrotropism for the first ten root types
sigma = [0.4, 1., 1., 1., 1.] * 2
for p in rs.getRootRandomParameter():
p.dx = 0.25 # adjust resolution
p.tropismT = pb.TropismType.hydro
p.tropismN = 2 # strength of tropism
p.tropismS = sigma[p.subType - 1]
# Static soil property in a thin layer
maxS = 0.7 # maximal
minS = 0.1 # minimal
slope = 5 # linear gradient between min and max (cm)
box = pb.SDF_PlantBox(30, 30, 2) # cm
layer = pb.SDF_RotateTranslate(box, pb.Vector3d(0, 0, -16))
soil_prop = pb.SoilLookUpSDF(layer, maxS, minS, slope)
# Set the soil properties before calling initialize
rs.setSoil(soil_prop)
# Initialize
rs.initialize()
# Simulate
simtime = 100 # e.g. 30 or 60 days
dt = 1
N = round(simtime / dt)
for _ in range(0, N):
# in a dynamic soil setting you would need to update the soil properties (soil_prop)
rs.simulate(dt)
""" nodes and segments from measurements """
import sys
sys.path.append("../../..")
import plantbox as pb
# Data from any source, as Python types
nodes = [
[0, 1, 0],
[0, 1, -1],
[0, 1, -2],
[0, 1, -3],
]
segs = [[0, 1], [1, 2], [2, 3]]
cts = [0., 0., 0.]
radii = [0.1, 0.1, 0.1]
# convert from Python to C++ binding types
nodes = [pb.Vector3d(n[0], n[1], n[2]) for n in nodes]
segs = [pb.Vector2i(s[0], s[1]) for s in segs]
# create the SegmentAnalyser without underlying RootSystem
ana = pb.SegmentAnalyser(nodes, segs, cts, radii)
print("length", ana.getSummed("length"))
ana.write("results/example_3d.vtp", ["creationTime", "radius"])
def vector_3d(a):
return pb.Vector3d(a[0], a[1], a[2])
path = "../../modelparameter/rootsystem/"
name = "Glycine_max_Moraes2020_opt2"
simtime = 154
N = 17 # number of columns
M = 3 # number of rows
dist = 38 # inter-row distance [cm]
distp = 6 # inter-plant distance within the rows [cm]
# Initializes N*M root systems
allRS = []
for i in range(0, N):
for j in range(0, M):
rs = pb.RootSystem()
rs.readParameters(path + name + ".xml")
rs.getRootSystemParameter().seedPos = pb.Vector3d(
distp * i, dist * j, -3.) # cm
rs.initialize(False) # verbose = False
allRS.append(rs)
# Simulate
rs.setSeed(2)
for rs in allRS:
rs.simulate(simtime, False) # verbose = False
# Export results as single vtp files (as polylines)
ana = pb.SegmentAnalyser() # see example 3b
for i, rs in enumerate(allRS):
vtpname = "results/" + name + "/" + str(i) + ".vtp"
rs.write(vtpname)
ana.addSegments(rs) # collect all
p2.a, p2.a_s = 0.0501, 0.0069 # [cm] radius TODO
p2.theta = (180. - 98.45) / 180. * np.pi # [rad]
# p2.lmax, p2.lmaxs = 3.339, 0.2 * 3.339 # fit k and r
# p2.r, p2.rs = 3.745, 0.1 * 3.745 # fit k and r
p2.lmax, p2.lmaxs = 5, 0.5 # fit r
p2.r, p2.rs = 0.483, 0.1 * 0.483 # fit r
p2.r, p2.rs = 0.823, 0.1 * 0.823 # fit r (last measurement removed)
# by visual comparison
p2.tropismT, p2.tropismN, p2.tropismS = pb.TropismType.gravi, 1, 0.2
rs.setOrganRandomParameter(p0)
rs.setOrganRandomParameter(p1)
rs.setOrganRandomParameter(p2)
""" seed """
srp = pb.SeedRandomParameter(rs) # with default values
srp.seedPos = pb.Vector3d(0., 0., -0.6) # [cm] seed position TODO ?
srp.maxB = 0 # [-] number of basal roots (neglecting basal roots and shoot borne)
rs.setRootSystemParameter(srp)
""" container geometry """
length = 7.425 # cm
height = 14.31 # cm
rhizotron = pb.SDF_PlantBox(length, length, height)
rs.setGeometry(rhizotron) # soilcore, or rhizotron
# elongation impedance at boundaries
layer = 0.5 # cm
smaller_rhizotron = pb.SDF_PlantBox(length - 2 * layer, length - 2 * layer,
height - layer)
scale_elongation = Boundary_Elongation_Impedance(
smaller_rhizotron, 0.1) # 1 instead of 0.1 would disable the impedance
for p in rs.getRootRandomParameter():
from cmath import pi
sys.path.append("../..")
import plantbox as pb
import numpy as np
import matplotlib.pyplot as plt
path = "../../modelparameter/rootsystem/"
name = "Glycine_max_Moraes2020_opt2"
rs = pb.RootSystem()
rs.readParameters(path + name + ".xml")
# Create and set geometry
rs.setMinDx(1.e-3)
x0 = pb.Vector3d(0., 0., -1.)
nx = pb.Vector3d(1., 0., -1.)
ny = pb.Vector3d(0., 1., -1.)
soil_layer = pb.SDF_HalfPlane(x0, nx,
ny) # there was bug, with updated CPlantBox
rs.setGeometry(soil_layer)
rs.setSeed(2)
rs.initialize()
simtime = 154. # days
dt = 1.
N = round(simtime / dt) # steps
fig, ax1 = plt.subplots()
# Plot some length over time
