def create_grid() -> Tuple[pp.Grid, dict, dict]:
""" Ivar ex3 grid"""
# Define the three fractures
n_points = 16
# Injection
f_1 = pp.EllipticFracture(
np.array([10, 3.5, -3]), 11, 18, 0.5, 0, 0, num_points=n_points,
)
f_2 = pp.EllipticFracture(
np.array([1, 5, 1]),
15,
10,
np.pi * 0,
np.pi / 4.0,
np.pi / 2.0,
num_points=n_points,
)
# Production
f_3 = pp.EllipticFracture(
np.array([-13, 0, 0]), 20, 10, 0.5, np.pi / 3, np.pi / 1.6, num_points=n_points,
)
fractures = [f_1, f_2, f_3]
# Define the domain
size = 50
box = {
"xmin": -size,
"xmax": size,
"ymin": -size,
"ymax": size,
"zmin": -size,
"zmax": size,
}
mesh_size = 3.2
mesh_args = {
"mesh_size_frac": mesh_size,
"mesh_size_min": 0.5 * mesh_size,
"mesh_size_bound": 3 * mesh_size,
}
# Make a fracture network
network = pp.FractureNetwork3d(fractures, domain=box)
# Generate the mixed-dimensional mesh
gb = network.mesh(mesh_args)
return gb, box, mesh_args
def create_grid(self):
"""
Method that creates and returns the GridBucket of a 3D domain with two
fractures. The two sides of the fractures are coupled together with a
mortar grid.
"""
# define fractures
f_1 = pp.EllipticFracture(np.array([-0.1, -0.3, -0.8]),
1.5,
1.5,
np.pi / 6.3,
np.pi / 2.2,
np.pi / 4.1,
num_points=8)
f_2 = pp.EllipticFracture(np.array([1.5, 0.6, 0.8]),
1.5,
1.5,
0,
np.pi / 2.3,
-np.pi / 4.2,
num_points=8)
# Define a 3d FractureNetwork
self.fractures = [f_1, f_2]
network = pp.FractureNetwork3d([f_1, f_2], domain=self.domain)
# Generate the mixed-dimensional mesh
gb = network.mesh(self.mesh_args)
# Remove fracture grid as it is not needed
for g2 in gb.grids_of_dimension(2):
gb.remove_node(g2)
# Define the mortar grid
meshing.create_mortar_grids(gb)
g = gb.grids_of_dimension(3)[0]
data_edge = gb.edge_props((g, g))
mg = data_edge['mortar_grid']
# Map the mortars to the subcell grid
data_edge['mortar_grid_f2c'] = copy.deepcopy(
mg) #keep copy of face to cell mortar
meshing.map_mortar_to_submortar(gb)
return gb
def fractures(self):
"""
Define the two fractures.
The first fracture is the one where injection takes place.
"""
n_points = 4
# Size
s = 12
# Major axis rotation
major = np.pi / 4
# Dip
dip_1, dip_2 = np.pi / 4, np.pi / 4
# Strike:
# The values below imply dip about the y and x axis, respectively
strike, strike_2 = np.pi / 2, 0
f_1 = pp.EllipticFracture(
np.array([-10, 0, 0]), s, s, major, strike, dip_1, num_points=n_points
)
f_2 = pp.EllipticFracture(
np.array([10, 0, 0]), s, s, major, strike_2, dip_2, num_points=n_points
)
self.fracs = [f_1, f_2]
def create_grid():
file_name = 'fractures.csv'
data = np.genfromtxt(file_name, delimiter=',')
data = np.atleast_2d(data)
centers = data[:, 0:3]
maj_ax = data[:, 3]
min_ax = data[:, 4]
maj_ax_ang = data[:, 5]
strike_ang = data[:, 6]
dip_ang = data[:, 7]
if data.shape[1] == 9:
num_points = data[:, 8]
else:
num_points = 16 * np.ones(data.shape[0])
frac_list = []
for i in range(maj_ax.shape[0]):
frac_list.append(
pp.EllipticFracture(centers[i, :], maj_ax[i], min_ax[i],
maj_ax_ang[i], strike_ang[i], dip_ang[i],
num_points[i]))
frac_network = pp.FractureNetwork(frac_list)
box = {
'xmin': -5000,
'ymin': -5000,
'zmin': -5000,
'xmax': 10000,
'ymax': 10000,
'zmax': 10000
}
gb = pp.meshing.simplex_grid(frac_network,
box,
mesh_size_bound=10000,
mesh_size_frac=500,
mesh_size_min=200)
return gb
def elliptic_network_3d_from_csv(file_name,
has_domain=True,
tol=1e-4,
degrees=False):
"""
Create the fracture network from a set of 3d fractures stored in a csv file and
domain. In the csv file, we assume the following structure
- first line (optional) describes the domain as a rectangle with
X_MIN, Y_MIN, Z_MIN, X_MAX, Y_MAX, Z_MAX
- the other lines descibe the N fractures as a elliptic fractures:
center_x, center_y, center_z, major_axis, minor_axis, major_axis_angle,
strike_angle, dip_angle, num_points.
See EllipticFracture for information about the parameters
Lines that start with a # are ignored.
Parameters:
file_name: name of the file
has_domain: if the first line in the csv file specify the domain
tol: (optional) tolerance for the methods
Return:
FractureNetwork3d: the fracture network
"""
# The first line of the csv file defines the bounding box for the domain
frac_list = []
# Extract the data from the csv file
with open(file_name, "r") as csv_file:
spam_reader = csv.reader(csv_file, delimiter=",")
# Read the domain first
if has_domain:
domain = np.asarray(next(spam_reader), dtype=np.float)
domain = {
"xmin": domain[0],
"xmax": domain[3],
"ymin": domain[1],
"ymax": domain[4],
"zmin": domain[2],
"zmax": domain[5],
}
for row in spam_reader:
# If the line starts with a '#', we consider this a comment
if row[0][0] == "#":
continue
# Read the data
data = np.asarray(row, dtype=np.float)
if not data.size % 9 == 0:
raise ValueError("Data has to have size 9")
# Skip empty lines. Useful if the file ends with a blank line.
if data.size == 0:
continue
centers = data[0:3]
maj_ax = data[3]
min_ax = data[4]
maj_ax_ang = data[5] * (1 - degrees + degrees * np.pi / 180)
strike_ang = data[6] * (1 - degrees + degrees * np.pi / 180)
dip_ang = data[7] * (1 - degrees + degrees * np.pi / 180)
num_points = int(data[8])
frac_list.append(
pp.EllipticFracture(centers, maj_ax, min_ax, maj_ax_ang,
strike_ang, dip_ang, num_points))
# Create the network
if has_domain:
return pp.FractureNetwork3d(frac_list, tol=tol, domain=domain)
else:
return pp.FractureNetwork3d(frac_list, tol=tol)
def create_grid(self):
"""
Method that creates the GridBucket of a 3D domain with three fractures.
The first fracture is the one where injection takes place and
production takes place in the third fracture. Fractures 1 and 2 intersect.
"""
# Define the three fractures
n_points = 16
# Injection
f_1 = pp.EllipticFracture(
np.array([10, 3.5, -3]),
11,
18,
0.5,
0,
0,
num_points=n_points,
)
f_2 = pp.EllipticFracture(
np.array([1, 5, 1]),
15,
10,
np.pi * 0,
np.pi / 4.0,
np.pi / 2.0,
num_points=n_points,
)
# Production
f_3 = pp.EllipticFracture(
np.array([-13, 0, 0]),
20,
10,
0.5,
np.pi / 3,
np.pi / 1.6,
num_points=n_points,
)
self.fractures = [f_1, f_2, f_3]
# Define the domain
size = 50
self.box = {
"xmin": -size,
"xmax": size,
"ymin": -size,
"ymax": size,
"zmin": -size,
"zmax": size,
}
# Make a fracture network
self.network = pp.FractureNetwork3d(self.fractures, domain=self.box)
# Generate the mixed-dimensional mesh
# write_fractures_to_csv(self)
gb = self.network.mesh(self.mesh_args)
pp.contact_conditions.set_projections(gb)
self.gb = gb
self.Nd = self.gb.dim_max()
# Tag the wells
self._tag_well_cells()
self.n_frac = len(gb.grids_of_dimension(self.Nd - 1))
self.update_all_apertures(to_iterate=False)
self.update_all_apertures()
