def _setup_pipes(fd_pipes, close_fds=True):
"""Setup pipes for a forked process.
WARNING: When not followed by exec, the close_fds behavior
can trigger interference from destructors that close file
descriptors. This interference happens when the garbage
collector intermittently executes such destructors after their
corresponding file descriptors have been re-used, leading
to intermittent "[Errno 9] Bad file descriptor" exceptions in
forked processes. This problem has been observed with PyPy 1.8,
and also with CPython under some circumstances (as triggered
by xmpppy in bug #374335). In order to close a safe subset of
file descriptors, see portage.locks._close_fds().
"""
my_fds = {}
# To protect from cases where direct assignment could
# clobber needed fds ({1:2, 2:1}) we first dupe the fds
# into unused fds.
for fd in fd_pipes:
my_fds[fd] = os.dup(fd_pipes[fd])
# Then assign them to what they should be.
for fd in my_fds:
os.dup2(my_fds[fd], fd)
if close_fds:
# Then close _all_ fds that haven't been explicitly
# requested to be kept open.
for fd in get_open_fds():
if fd not in my_fds:
try:
os.close(fd)
except OSError:
pass
def _spawn(self, args, fd_pipes=None, **kwargs):
"""
Override SpawnProcess._spawn to fork a subprocess that calls
self._run(). This uses multiprocessing.Process in order to leverage
any pre-fork and post-fork interpreter housekeeping that it provides,
promoting a healthy state for the forked interpreter.
"""
# Since multiprocessing.Process closes sys.__stdin__, create a
# temporary duplicate of fd_pipes[0] so that sys.__stdin__ can
# be restored in the subprocess, in case this is needed for
# things like PROPERTIES=interactive support.
stdin_dup = None
try:
stdin_fd = fd_pipes.get(0)
if stdin_fd is not None and stdin_fd == portage._get_stdin(
).fileno():
stdin_dup = os.dup(stdin_fd)
fcntl.fcntl(stdin_dup, fcntl.F_SETFD,
fcntl.fcntl(stdin_fd, fcntl.F_GETFD))
fd_pipes[0] = stdin_dup
self._proc = multiprocessing.Process(target=self._bootstrap,
args=(fd_pipes, ))
self._proc.start()
finally:
if stdin_dup is not None:
os.close(stdin_dup)
self._proc_join_task = asyncio.ensure_future(self._proc_join(
self._proc, loop=self.scheduler),
loop=self.scheduler)
self._proc_join_task.add_done_callback(
functools.partial(self._proc_join_done, self._proc))
return [self._proc.pid]
def _testPipeLogger(self, test_string):
producer = PopenProcess(proc=subprocess.Popen(
["bash", "-c", self._echo_cmd % test_string],
stdout=subprocess.PIPE, stderr=subprocess.STDOUT),
scheduler=global_event_loop())
fd, log_file_path = tempfile.mkstemp()
try:
consumer = PipeLogger(background=True,
input_fd=os.dup(producer.proc.stdout.fileno()),
log_file_path=log_file_path)
# Close the stdout pipe, since we duplicated it, and it
# must be closed in order to avoid a ResourceWarning.
producer.proc.stdout.close()
producer.pipe_reader = consumer
producer.start()
producer.wait()
self.assertEqual(producer.returncode, os.EX_OK)
self.assertEqual(consumer.returncode, os.EX_OK)
with open(log_file_path, 'rb') as f:
content = f.read()
finally:
os.close(fd)
os.unlink(log_file_path)
return content.decode('ascii', 'replace')
def _testPipeLogger(self, test_string):
producer = PopenProcess(proc=subprocess.Popen(
["bash", "-c", self._echo_cmd % test_string],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT),
scheduler=global_event_loop())
fd, log_file_path = tempfile.mkstemp()
try:
consumer = PipeLogger(background=True,
input_fd=os.dup(
producer.proc.stdout.fileno()),
log_file_path=log_file_path)
# Close the stdout pipe, since we duplicated it, and it
# must be closed in order to avoid a ResourceWarning.
producer.proc.stdout.close()
producer.pipe_reader = consumer
producer.start()
producer.wait()
self.assertEqual(producer.returncode, os.EX_OK)
self.assertEqual(consumer.returncode, os.EX_OK)
with open(log_file_path, 'rb') as f:
content = f.read()
finally:
os.close(fd)
os.unlink(log_file_path)
return content.decode('ascii', 'replace')
def _setup_pipes(fd_pipes):
"""Setup pipes for a forked process."""
my_fds = {}
# To protect from cases where direct assignment could
# clobber needed fds ({1:2, 2:1}) we first dupe the fds
# into unused fds.
for fd in fd_pipes:
my_fds[fd] = os.dup(fd_pipes[fd])
# Then assign them to what they should be.
for fd in my_fds:
os.dup2(my_fds[fd], fd)
# Then close _all_ fds that haven't been explicitly
# requested to be kept open.
for fd in get_open_fds():
if fd not in my_fds:
try:
os.close(fd)
except OSError:
pass
def _setup_pipes(fd_pipes, close_fds=True):
"""Setup pipes for a forked process."""
my_fds = {}
# To protect from cases where direct assignment could
# clobber needed fds ({1:2, 2:1}) we first dupe the fds
# into unused fds.
for fd in fd_pipes:
my_fds[fd] = os.dup(fd_pipes[fd])
# Then assign them to what they should be.
for fd in my_fds:
os.dup2(my_fds[fd], fd)
if close_fds:
# Then close _all_ fds that haven't been explicitly
# requested to be kept open.
for fd in get_open_fds():
if fd not in my_fds:
try:
os.close(fd)
except OSError:
pass
def _setup_pipes(fd_pipes, close_fds=True, inheritable=None):
"""Setup pipes for a forked process.
Even when close_fds is False, file descriptors referenced as
values in fd_pipes are automatically closed if they do not also
occur as keys in fd_pipes. It is assumed that the caller will
explicitly add them to the fd_pipes keys if they are intended
to remain open. This allows for convenient elimination of
unnecessary duplicate file descriptors.
WARNING: When not followed by exec, the close_fds behavior
can trigger interference from destructors that close file
descriptors. This interference happens when the garbage
collector intermittently executes such destructors after their
corresponding file descriptors have been re-used, leading
to intermittent "[Errno 9] Bad file descriptor" exceptions in
forked processes. This problem has been observed with PyPy 1.8,
and also with CPython under some circumstances (as triggered
by xmpppy in bug #374335). In order to close a safe subset of
file descriptors, see portage.locks._close_fds().
NOTE: When not followed by exec, even when close_fds is False,
it's still possible for dup2() calls to cause interference in a
way that's similar to the way that close_fds interferes (since
dup2() has to close the target fd if it happens to be open).
It's possible to avoid such interference by using allocated
file descriptors as the keys in fd_pipes. For example:
pr, pw = os.pipe()
fd_pipes[pw] = pw
By using the allocated pw file descriptor as the key in fd_pipes,
it's not necessary for dup2() to close a file descriptor (it
actually does nothing in this case), which avoids possible
interference.
"""
reverse_map = {}
# To protect from cases where direct assignment could
# clobber needed fds ({1:2, 2:1}) we create a reverse map
# in order to know when it's necessary to create temporary
# backup copies with os.dup().
for newfd, oldfd in fd_pipes.items():
newfds = reverse_map.get(oldfd)
if newfds is None:
newfds = []
reverse_map[oldfd] = newfds
newfds.append(newfd)
# Assign newfds via dup2(), making temporary backups when
# necessary, and closing oldfd if the caller has not
# explicitly requested for it to remain open by adding
# it to the keys of fd_pipes.
while reverse_map:
oldfd, newfds = reverse_map.popitem()
old_fdflags = None
for newfd in newfds:
if newfd in reverse_map:
# Make a temporary backup before re-assignment, assuming
# that backup_fd won't collide with a key in reverse_map
# (since all of the keys correspond to open file
# descriptors, and os.dup() only allocates a previously
# unused file discriptors).
backup_fd = os.dup(newfd)
reverse_map[backup_fd] = reverse_map.pop(newfd)
if oldfd != newfd:
os.dup2(oldfd, newfd)
if _set_inheritable is not None:
# Don't do this unless _set_inheritable is available,
# since it's used below to ensure correct state, and
# otherwise /dev/null stdin fails to inherit (at least
# with Python versions from 3.1 to 3.3).
if old_fdflags is None:
old_fdflags = fcntl.fcntl(oldfd, fcntl.F_GETFD)
fcntl.fcntl(newfd, fcntl.F_SETFD, old_fdflags)
if _set_inheritable is not None:
inheritable_state = None
if not (old_fdflags is None or _FD_CLOEXEC is None):
inheritable_state = not bool(old_fdflags & _FD_CLOEXEC)
if inheritable is not None:
if inheritable_state is not inheritable:
_set_inheritable(newfd, inheritable)
elif newfd in (0, 1, 2):
if inheritable_state is not True:
_set_inheritable(newfd, True)
if oldfd not in fd_pipes:
# If oldfd is not a key in fd_pipes, then it's safe
# to close now, since we've already made all of the
# requested duplicates. This also closes every
# backup_fd that may have been created on previous
# iterations of this loop.
os.close(oldfd)
if close_fds:
# Then close _all_ fds that haven't been explicitly
# requested to be kept open.
for fd in get_open_fds():
if fd not in fd_pipes:
try:
os.close(fd)
except OSError:
pass
def _start(self):
if self.fd_pipes is None:
self.fd_pipes = {}
fd_pipes = self.fd_pipes
self._files = self._files_dict()
files = self._files
master_fd, slave_fd = self._pipe(fd_pipes)
fcntl.fcntl(master_fd, fcntl.F_SETFL,
fcntl.fcntl(master_fd, fcntl.F_GETFL) | os.O_NONBLOCK)
files.process = master_fd
logfile = None
if self._can_log(slave_fd):
logfile = self.logfile
null_input = None
if not self.background or 0 in fd_pipes:
# Subclasses such as AbstractEbuildProcess may have already passed
# in a null file descriptor in fd_pipes, so use that when given.
pass
else:
# TODO: Use job control functions like tcsetpgrp() to control
# access to stdin. Until then, use /dev/null so that any
# attempts to read from stdin will immediately return EOF
# instead of blocking indefinitely.
null_input = os.open('/dev/null', os.O_RDWR)
fd_pipes[0] = null_input
fd_pipes.setdefault(0, sys.stdin.fileno())
fd_pipes.setdefault(1, sys.stdout.fileno())
fd_pipes.setdefault(2, sys.stderr.fileno())
# flush any pending output
for fd in fd_pipes.values():
if fd == sys.stdout.fileno():
sys.stdout.flush()
if fd == sys.stderr.fileno():
sys.stderr.flush()
if logfile is not None:
fd_pipes_orig = fd_pipes.copy()
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
files.log = open(_unicode_encode(logfile,
encoding=_encodings['fs'], errors='strict'), mode='ab')
if logfile.endswith('.gz'):
self._log_file_real = files.log
files.log = gzip.GzipFile(filename='', mode='ab',
fileobj=files.log)
portage.util.apply_secpass_permissions(logfile,
uid=portage.portage_uid, gid=portage.portage_gid,
mode=0o660)
if not self.background:
files.stdout = os.dup(fd_pipes_orig[1])
output_handler = self._output_handler
else:
# Create a dummy pipe so the scheduler can monitor
# the process from inside a poll() loop.
fd_pipes[self._dummy_pipe_fd] = slave_fd
if self.background:
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
output_handler = self._dummy_handler
kwargs = {}
for k in self._spawn_kwarg_names:
v = getattr(self, k)
if v is not None:
kwargs[k] = v
kwargs["fd_pipes"] = fd_pipes
kwargs["returnpid"] = True
kwargs.pop("logfile", None)
self._reg_id = self.scheduler.register(files.process,
self._registered_events, output_handler)
self._registered = True
retval = self._spawn(self.args, **kwargs)
os.close(slave_fd)
if null_input is not None:
os.close(null_input)
if isinstance(retval, int):
# spawn failed
self._unregister()
self._set_returncode((self.pid, retval))
self.wait()
return
self.pid = retval[0]
portage.process.spawned_pids.remove(self.pid)
def _exec(binary, mycommand, opt_name, fd_pipes, env, gid, groups, uid, umask,
pre_exec):
"""
Execute a given binary with options
@param binary: Name of program to execute
@type binary: String
@param mycommand: Options for program
@type mycommand: String
@param opt_name: Name of process (defaults to binary)
@type opt_name: String
@param fd_pipes: Mapping pipes to destination; { 0:0, 1:1, 2:2 }
@type fd_pipes: Dictionary
@param env: Key,Value mapping for Environmental Variables
@type env: Dictionary
@param gid: Group ID to run the process under
@type gid: Integer
@param groups: Groups the Process should be in.
@type groups: Integer
@param uid: User ID to run the process under
@type uid: Integer
@param umask: an int representing a unix umask (see man chmod for umask details)
@type umask: Integer
@param pre_exec: A function to be called with no arguments just prior to the exec call.
@type pre_exec: callable
@rtype: None
@returns: Never returns (calls os.execve)
"""
# If the process we're creating hasn't been given a name
# assign it the name of the executable.
if not opt_name:
opt_name = os.path.basename(binary)
# Set up the command's argument list.
myargs = [opt_name]
myargs.extend(mycommand[1:])
# Set up the command's pipes.
my_fds = {}
# To protect from cases where direct assignment could
# clobber needed fds ({1:2, 2:1}) we first dupe the fds
# into unused fds.
for fd in fd_pipes:
my_fds[fd] = os.dup(fd_pipes[fd])
# Then assign them to what they should be.
for fd in my_fds:
os.dup2(my_fds[fd], fd)
# Then close _all_ fds that haven't been explictly
# requested to be kept open.
for fd in get_open_fds():
if fd not in my_fds:
try:
os.close(fd)
except OSError:
pass
# Set requested process permissions.
if gid:
os.setgid(gid)
if groups:
os.setgroups(groups)
if uid:
os.setuid(uid)
if umask:
os.umask(umask)
if pre_exec:
pre_exec()
# And switch to the new process.
os.execve(binary, myargs, env)
def _setup_pipes(fd_pipes, close_fds=True, inheritable=None):
"""Setup pipes for a forked process.
Even when close_fds is False, file descriptors referenced as
values in fd_pipes are automatically closed if they do not also
occur as keys in fd_pipes. It is assumed that the caller will
explicitly add them to the fd_pipes keys if they are intended
to remain open. This allows for convenient elimination of
unnecessary duplicate file descriptors.
WARNING: When not followed by exec, the close_fds behavior
can trigger interference from destructors that close file
descriptors. This interference happens when the garbage
collector intermittently executes such destructors after their
corresponding file descriptors have been re-used, leading
to intermittent "[Errno 9] Bad file descriptor" exceptions in
forked processes. This problem has been observed with PyPy 1.8,
and also with CPython under some circumstances (as triggered
by xmpppy in bug #374335). In order to close a safe subset of
file descriptors, see portage.locks._close_fds().
NOTE: When not followed by exec, even when close_fds is False,
it's still possible for dup2() calls to cause interference in a
way that's similar to the way that close_fds interferes (since
dup2() has to close the target fd if it happens to be open).
It's possible to avoid such interference by using allocated
file descriptors as the keys in fd_pipes. For example:
pr, pw = os.pipe()
fd_pipes[pw] = pw
By using the allocated pw file descriptor as the key in fd_pipes,
it's not necessary for dup2() to close a file descriptor (it
actually does nothing in this case), which avoids possible
interference.
"""
reverse_map = {}
# To protect from cases where direct assignment could
# clobber needed fds ({1:2, 2:1}) we create a reverse map
# in order to know when it's necessary to create temporary
# backup copies with os.dup().
for newfd, oldfd in fd_pipes.items():
newfds = reverse_map.get(oldfd)
if newfds is None:
newfds = []
reverse_map[oldfd] = newfds
newfds.append(newfd)
# Assign newfds via dup2(), making temporary backups when
# necessary, and closing oldfd if the caller has not
# explicitly requested for it to remain open by adding
# it to the keys of fd_pipes.
while reverse_map:
oldfd, newfds = reverse_map.popitem()
old_fdflags = None
for newfd in newfds:
if newfd in reverse_map:
# Make a temporary backup before re-assignment, assuming
# that backup_fd won't collide with a key in reverse_map
# (since all of the keys correspond to open file
# descriptors, and os.dup() only allocates a previously
# unused file discriptors).
backup_fd = os.dup(newfd)
reverse_map[backup_fd] = reverse_map.pop(newfd)
if oldfd != newfd:
os.dup2(oldfd, newfd)
if _set_inheritable is not None:
# Don't do this unless _set_inheritable is available,
# since it's used below to ensure correct state, and
# otherwise /dev/null stdin fails to inherit (at least
# with Python versions from 3.1 to 3.3).
if old_fdflags is None:
old_fdflags = fcntl.fcntl(oldfd, fcntl.F_GETFD)
fcntl.fcntl(newfd, fcntl.F_SETFD, old_fdflags)
if _set_inheritable is not None:
inheritable_state = None
if not (old_fdflags is None or _FD_CLOEXEC is None):
inheritable_state = not bool(old_fdflags & _FD_CLOEXEC)
if inheritable is not None:
if inheritable_state is not inheritable:
_set_inheritable(newfd, inheritable)
elif newfd in (0, 1, 2):
if inheritable_state is not True:
_set_inheritable(newfd, True)
if oldfd not in fd_pipes:
# If oldfd is not a key in fd_pipes, then it's safe
# to close now, since we've already made all of the
# requested duplicates. This also closes every
# backup_fd that may have been created on previous
# iterations of this loop.
os.close(oldfd)
if close_fds:
# Then close _all_ fds that haven't been explicitly
# requested to be kept open.
for fd in get_open_fds():
if fd not in fd_pipes:
try:
os.close(fd)
except OSError:
pass
def _start(self):
if self.fd_pipes is None:
self.fd_pipes = {}
fd_pipes = self.fd_pipes
master_fd, slave_fd = self._pipe(fd_pipes)
can_log = self._can_log(slave_fd)
if can_log:
log_file_path = self.logfile
else:
log_file_path = None
null_input = None
if not self.background or 0 in fd_pipes:
# Subclasses such as AbstractEbuildProcess may have already passed
# in a null file descriptor in fd_pipes, so use that when given.
pass
else:
# TODO: Use job control functions like tcsetpgrp() to control
# access to stdin. Until then, use /dev/null so that any
# attempts to read from stdin will immediately return EOF
# instead of blocking indefinitely.
null_input = os.open('/dev/null', os.O_RDWR)
fd_pipes[0] = null_input
fd_pipes.setdefault(0, sys.__stdin__.fileno())
fd_pipes.setdefault(1, sys.__stdout__.fileno())
fd_pipes.setdefault(2, sys.__stderr__.fileno())
# flush any pending output
stdout_filenos = (sys.__stdout__.fileno(), sys.__stderr__.fileno())
for fd in fd_pipes.values():
if fd in stdout_filenos:
sys.__stdout__.flush()
sys.__stderr__.flush()
break
fd_pipes_orig = fd_pipes.copy()
if log_file_path is not None:
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
else:
# Create a dummy pipe so the scheduler can monitor
# the process from inside a poll() loop.
fd_pipes[self._dummy_pipe_fd] = slave_fd
if self.background:
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
kwargs = {}
for k in self._spawn_kwarg_names:
v = getattr(self, k)
if v is not None:
kwargs[k] = v
kwargs["fd_pipes"] = fd_pipes
kwargs["returnpid"] = True
kwargs.pop("logfile", None)
retval = self._spawn(self.args, **kwargs)
os.close(slave_fd)
if null_input is not None:
os.close(null_input)
if isinstance(retval, int):
# spawn failed
self._unregister()
self._set_returncode((self.pid, retval))
self.wait()
return
self.pid = retval[0]
portage.process.spawned_pids.remove(self.pid)
stdout_fd = None
if can_log and not self.background:
stdout_fd = os.dup(fd_pipes_orig[1])
self._pipe_logger = PipeLogger(background=self.background,
scheduler=self.scheduler, input_fd=master_fd,
log_file_path=log_file_path,
stdout_fd=stdout_fd)
self._pipe_logger.addExitListener(self._pipe_logger_exit)
self._pipe_logger.start()
self._registered = True
def _start(self):
if self.fd_pipes is None:
self.fd_pipes = {}
else:
self.fd_pipes = self.fd_pipes.copy()
fd_pipes = self.fd_pipes
master_fd, slave_fd = self._pipe(fd_pipes)
can_log = self._can_log(slave_fd)
if can_log:
log_file_path = self.logfile
else:
log_file_path = None
null_input = None
if not self.background or 0 in fd_pipes:
# Subclasses such as AbstractEbuildProcess may have already passed
# in a null file descriptor in fd_pipes, so use that when given.
pass
else:
# TODO: Use job control functions like tcsetpgrp() to control
# access to stdin. Until then, use /dev/null so that any
# attempts to read from stdin will immediately return EOF
# instead of blocking indefinitely.
null_input = os.open('/dev/null', os.O_RDWR)
fd_pipes[0] = null_input
fd_pipes.setdefault(0, portage._get_stdin().fileno())
fd_pipes.setdefault(1, sys.__stdout__.fileno())
fd_pipes.setdefault(2, sys.__stderr__.fileno())
# flush any pending output
stdout_filenos = (sys.__stdout__.fileno(), sys.__stderr__.fileno())
for fd in fd_pipes.values():
if fd in stdout_filenos:
sys.__stdout__.flush()
sys.__stderr__.flush()
break
fd_pipes_orig = fd_pipes.copy()
if log_file_path is not None or self.background:
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
else:
# Create a dummy pipe that PipeLogger uses to efficiently
# monitor for process exit by listening for the EOF event.
# Re-use of the allocated fd number for the key in fd_pipes
# guarantees that the keys will not collide for similarly
# allocated pipes which are used by callers such as
# FileDigester and MergeProcess. See the _setup_pipes
# docstring for more benefits of this allocation approach.
self._dummy_pipe_fd = slave_fd
fd_pipes[slave_fd] = slave_fd
kwargs = {}
for k in self._spawn_kwarg_names:
v = getattr(self, k)
if v is not None:
kwargs[k] = v
kwargs["fd_pipes"] = fd_pipes
kwargs["returnpid"] = True
kwargs.pop("logfile", None)
retval = self._spawn(self.args, **kwargs)
os.close(slave_fd)
if null_input is not None:
os.close(null_input)
if isinstance(retval, int):
# spawn failed
self.returncode = retval
self._async_wait()
return
self.pid = retval[0]
stdout_fd = None
if can_log and not self.background:
stdout_fd = os.dup(fd_pipes_orig[1])
build_logger = BuildLogger(env=self.env,
log_path=log_file_path,
log_filter_file=self.log_filter_file,
scheduler=self.scheduler)
build_logger.start()
pipe_logger = PipeLogger(background=self.background,
scheduler=self.scheduler,
input_fd=master_fd,
log_file_path=build_logger.stdin,
stdout_fd=stdout_fd)
pipe_logger.start()
self._registered = True
self._main_task = asyncio.ensure_future(self._main(
build_logger, pipe_logger),
loop=self.scheduler)
self._main_task.add_done_callback(self._main_exit)
def _start(self):
if self.cancelled:
return
if self.fd_pipes is None:
self.fd_pipes = {}
fd_pipes = self.fd_pipes
fd_pipes.setdefault(0, sys.stdin.fileno())
fd_pipes.setdefault(1, sys.stdout.fileno())
fd_pipes.setdefault(2, sys.stderr.fileno())
# flush any pending output
for fd in fd_pipes.values():
if fd == sys.stdout.fileno():
sys.stdout.flush()
if fd == sys.stderr.fileno():
sys.stderr.flush()
self._files = self._files_dict()
files = self._files
master_fd, slave_fd = self._pipe(fd_pipes)
fcntl.fcntl(master_fd, fcntl.F_SETFL,
fcntl.fcntl(master_fd, fcntl.F_GETFL) | os.O_NONBLOCK)
logfile = None
if self._can_log(slave_fd):
logfile = self.logfile
null_input = None
fd_pipes_orig = fd_pipes.copy()
if self.background:
# TODO: Use job control functions like tcsetpgrp() to control
# access to stdin. Until then, use /dev/null so that any
# attempts to read from stdin will immediately return EOF
# instead of blocking indefinitely.
null_input = open('/dev/null', 'rb')
fd_pipes[0] = null_input.fileno()
else:
fd_pipes[0] = fd_pipes_orig[0]
files.process = os.fdopen(master_fd, 'rb')
if logfile is not None:
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
files.log = open(logfile, mode='ab')
portage.util.apply_secpass_permissions(logfile,
uid=portage.portage_uid, gid=portage.portage_gid,
mode=0o660)
if not self.background:
files.stdout = os.fdopen(os.dup(fd_pipes_orig[1]), 'wb')
output_handler = self._output_handler
else:
# Create a dummy pipe so the scheduler can monitor
# the process from inside a poll() loop.
fd_pipes[self._dummy_pipe_fd] = slave_fd
if self.background:
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
output_handler = self._dummy_handler
kwargs = {}
for k in self._spawn_kwarg_names:
v = getattr(self, k)
if v is not None:
kwargs[k] = v
kwargs["fd_pipes"] = fd_pipes
kwargs["returnpid"] = True
kwargs.pop("logfile", None)
self._reg_id = self.scheduler.register(files.process.fileno(),
self._registered_events, output_handler)
self._registered = True
retval = self._spawn(self.args, **kwargs)
os.close(slave_fd)
if null_input is not None:
null_input.close()
if isinstance(retval, int):
# spawn failed
self._unregister()
self.returncode = retval
self.wait()
return
self.pid = retval[0]
portage.process.spawned_pids.remove(self.pid)
def _start(self):
if self.fd_pipes is None:
self.fd_pipes = {}
else:
self.fd_pipes = self.fd_pipes.copy()
fd_pipes = self.fd_pipes
master_fd, slave_fd = self._pipe(fd_pipes)
can_log = self._can_log(slave_fd)
if can_log:
log_file_path = self.logfile
else:
log_file_path = None
null_input = None
if not self.background or 0 in fd_pipes:
# Subclasses such as AbstractEbuildProcess may have already passed
# in a null file descriptor in fd_pipes, so use that when given.
pass
else:
# TODO: Use job control functions like tcsetpgrp() to control
# access to stdin. Until then, use /dev/null so that any
# attempts to read from stdin will immediately return EOF
# instead of blocking indefinitely.
null_input = os.open('/dev/null', os.O_RDWR)
fd_pipes[0] = null_input
fd_pipes.setdefault(0, portage._get_stdin().fileno())
fd_pipes.setdefault(1, sys.__stdout__.fileno())
fd_pipes.setdefault(2, sys.__stderr__.fileno())
# flush any pending output
stdout_filenos = (sys.__stdout__.fileno(), sys.__stderr__.fileno())
for fd in fd_pipes.values():
if fd in stdout_filenos:
sys.__stdout__.flush()
sys.__stderr__.flush()
break
fd_pipes_orig = fd_pipes.copy()
if log_file_path is not None or self.background:
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
else:
# Create a dummy pipe that PipeLogger uses to efficiently
# monitor for process exit by listening for the EOF event.
# Re-use of the allocated fd number for the key in fd_pipes
# guarantees that the keys will not collide for similarly
# allocated pipes which are used by callers such as
# FileDigester and MergeProcess. See the _setup_pipes
# docstring for more benefits of this allocation approach.
self._dummy_pipe_fd = slave_fd
fd_pipes[slave_fd] = slave_fd
kwargs = {}
for k in self._spawn_kwarg_names:
v = getattr(self, k)
if v is not None:
kwargs[k] = v
kwargs["fd_pipes"] = fd_pipes
kwargs["returnpid"] = True
kwargs.pop("logfile", None)
retval = self._spawn(self.args, **kwargs)
os.close(slave_fd)
if null_input is not None:
os.close(null_input)
if isinstance(retval, int):
# spawn failed
self._unregister()
self._set_returncode((self.pid, retval))
self._async_wait()
return
self.pid = retval[0]
stdout_fd = None
if can_log and not self.background:
stdout_fd = os.dup(fd_pipes_orig[1])
# FD_CLOEXEC is enabled by default in Python >=3.4.
if sys.hexversion < 0x3040000 and fcntl is not None:
try:
fcntl.FD_CLOEXEC
except AttributeError:
pass
else:
fcntl.fcntl(stdout_fd, fcntl.F_SETFD,
fcntl.fcntl(stdout_fd,
fcntl.F_GETFD) | fcntl.FD_CLOEXEC)
self._pipe_logger = PipeLogger(background=self.background,
scheduler=self.scheduler, input_fd=master_fd,
log_file_path=log_file_path,
stdout_fd=stdout_fd)
self._pipe_logger.addExitListener(self._pipe_logger_exit)
self._pipe_logger.start()
self._registered = True
def _exec(binary, mycommand, opt_name, fd_pipes, env, gid, groups, uid, umask,
pre_exec):
"""
Execute a given binary with options
@param binary: Name of program to execute
@type binary: String
@param mycommand: Options for program
@type mycommand: String
@param opt_name: Name of process (defaults to binary)
@type opt_name: String
@param fd_pipes: Mapping pipes to destination; { 0:0, 1:1, 2:2 }
@type fd_pipes: Dictionary
@param env: Key,Value mapping for Environmental Variables
@type env: Dictionary
@param gid: Group ID to run the process under
@type gid: Integer
@param groups: Groups the Process should be in.
@type groups: Integer
@param uid: User ID to run the process under
@type uid: Integer
@param umask: an int representing a unix umask (see man chmod for umask details)
@type umask: Integer
@param pre_exec: A function to be called with no arguments just prior to the exec call.
@type pre_exec: callable
@rtype: None
@returns: Never returns (calls os.execve)
"""
# If the process we're creating hasn't been given a name
# assign it the name of the executable.
if not opt_name:
opt_name = os.path.basename(binary)
# Set up the command's argument list.
myargs = [opt_name]
myargs.extend(mycommand[1:])
# Set up the command's pipes.
my_fds = {}
# To protect from cases where direct assignment could
# clobber needed fds ({1:2, 2:1}) we first dupe the fds
# into unused fds.
for fd in fd_pipes:
my_fds[fd] = os.dup(fd_pipes[fd])
# Then assign them to what they should be.
for fd in my_fds:
os.dup2(my_fds[fd], fd)
# Then close _all_ fds that haven't been explictly
# requested to be kept open.
for fd in get_open_fds():
if fd not in my_fds:
try:
os.close(fd)
except OSError:
pass
# Set requested process permissions.
if gid:
os.setgid(gid)
if groups:
os.setgroups(groups)
if uid:
os.setuid(uid)
if umask:
os.umask(umask)
if pre_exec:
pre_exec()
# And switch to the new process.
os.execve(binary, myargs, env)
def _start(self):
if self.cancelled:
return
if self.fd_pipes is None:
self.fd_pipes = {}
fd_pipes = self.fd_pipes
fd_pipes.setdefault(0, sys.stdin.fileno())
fd_pipes.setdefault(1, sys.stdout.fileno())
fd_pipes.setdefault(2, sys.stderr.fileno())
# flush any pending output
for fd in fd_pipes.values():
if fd == sys.stdout.fileno():
sys.stdout.flush()
if fd == sys.stderr.fileno():
sys.stderr.flush()
self._files = self._files_dict()
files = self._files
master_fd, slave_fd = self._pipe(fd_pipes)
fcntl.fcntl(master_fd, fcntl.F_SETFL,
fcntl.fcntl(master_fd, fcntl.F_GETFL) | os.O_NONBLOCK)
logfile = None
if self._can_log(slave_fd):
logfile = self.logfile
null_input = None
fd_pipes_orig = fd_pipes.copy()
if self.background:
# TODO: Use job control functions like tcsetpgrp() to control
# access to stdin. Until then, use /dev/null so that any
# attempts to read from stdin will immediately return EOF
# instead of blocking indefinitely.
null_input = open('/dev/null', 'rb')
fd_pipes[0] = null_input.fileno()
else:
fd_pipes[0] = fd_pipes_orig[0]
files.process = os.fdopen(master_fd, 'rb')
if logfile is not None:
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
files.log = open(logfile, mode='ab')
portage.util.apply_secpass_permissions(logfile,
uid=portage.portage_uid,
gid=portage.portage_gid,
mode=0o660)
if not self.background:
files.stdout = os.fdopen(os.dup(fd_pipes_orig[1]), 'wb')
output_handler = self._output_handler
else:
# Create a dummy pipe so the scheduler can monitor
# the process from inside a poll() loop.
fd_pipes[self._dummy_pipe_fd] = slave_fd
if self.background:
fd_pipes[1] = slave_fd
fd_pipes[2] = slave_fd
output_handler = self._dummy_handler
kwargs = {}
for k in self._spawn_kwarg_names:
v = getattr(self, k)
if v is not None:
kwargs[k] = v
kwargs["fd_pipes"] = fd_pipes
kwargs["returnpid"] = True
kwargs.pop("logfile", None)
self._reg_id = self.scheduler.register(files.process.fileno(),
self._registered_events,
output_handler)
self._registered = True
retval = self._spawn(self.args, **kwargs)
os.close(slave_fd)
if null_input is not None:
null_input.close()
if isinstance(retval, int):
# spawn failed
self._unregister()
self.returncode = retval
self.wait()
return
self.pid = retval[0]
portage.process.spawned_pids.remove(self.pid)
