def __do_address_mode(self):
""" This code is running in a thread when in address mode. """
expire = time.time() + self.__address_mode_timeout
address_mode = power_api.set_addressmode()
want_an_address_8 = power_api.want_an_address(
power_api.POWER_API_8_PORTS)
want_an_address_12 = power_api.want_an_address(
power_api.POWER_API_12_PORTS)
set_address = power_api.set_address()
# AGT start
data = address_mode.create_input(power_api.BROADCAST_ADDRESS,
self.__get_cid(),
power_api.ADDRESS_MODE)
self.__write_to_serial(data)
# Wait for WAA and answer.
while not self.__address_mode_stop and time.time() < expire:
try:
header, data = self.__read_from_serial()
waa_8 = want_an_address_8.check_header_partial(header)
waa_12 = want_an_address_12.check_header_partial(header)
if not waa_8 and not waa_12:
LOGGER.warning(
"Received non WAA/WAD message in address mode")
else:
(old_address, cid) = (ord(header[:2][1]), header[2:3])
# Ask power_controller for new address, and register it.
new_address = self.__power_controller.get_free_address()
if self.__power_controller.module_exists(old_address):
self.__power_controller.readdress_power_module(
old_address, new_address)
else:
version = power_api.POWER_API_8_PORTS if waa_8 else power_api.POWER_API_12_PORTS
self.__power_controller.register_power_module(
new_address, version)
# Send new address to power module
address_data = set_address.create_input(
old_address, ord(cid), new_address)
self.__write_to_serial(address_data)
except CommunicationTimedOutException:
pass # Didn't receive a command, no problem.
except Exception as exception:
traceback.print_exc()
LOGGER.warning("Got exception in address mode: %s", exception)
# AGT stop
data = address_mode.create_input(power_api.BROADCAST_ADDRESS,
self.__get_cid(),
power_api.NORMAL_MODE)
self.__write_to_serial(data)
self.__address_mode = False
self.__address_thread = None
def test_address_mode(self):
""" Test the address mode. """
sad = power_api.set_addressmode()
serial_mock = RS485(SerialMock(
[sin(sad.create_input(power_api.BROADCAST_ADDRESS, 1, power_api.ADDRESS_MODE)),
sout(power_api.want_an_address(power_api.POWER_API_8_PORTS).create_output(0, 0)),
sin(power_api.set_address().create_input(0, 0, 1)),
sout(power_api.want_an_address(power_api.POWER_API_12_PORTS).create_output(0, 0)),
sin(power_api.set_address().create_input(0, 0, 2)),
sout(''), # Timeout read after 1 second
sin(sad.create_input(power_api.BROADCAST_ADDRESS, 2, power_api.NORMAL_MODE))],
1
))
SetUpTestInjections(power_db=PowerCommunicatorTest.FILE)
controller = PowerController()
comm = self.__get_communicator(serial_mock, power_controller=controller)
comm.start()
self.assertEqual(controller.get_free_address(), 1)
comm.start_address_mode()
self.assertTrue(comm.in_address_mode())
time.sleep(0.5)
comm.stop_address_mode()
self.assertEqual(controller.get_free_address(), 3)
self.assertFalse(comm.in_address_mode())
def test_address_mode(self):
""" Test the address mode. """
sad = power_api.set_addressmode()
serial_mock = RS485(SerialMock(
[sin(sad.create_input(power_api.BROADCAST_ADDRESS, 1, power_api.ADDRESS_MODE)),
sout(power_api.want_an_address(power_api.POWER_API_8_PORTS).create_output(0, 0)),
sin(power_api.set_address().create_input(0, 0, 1)),
sout(power_api.want_an_address(power_api.POWER_API_12_PORTS).create_output(0, 0)),
sin(power_api.set_address().create_input(0, 0, 2)),
sout(''), ## Timeout read after 1 second
sin(sad.create_input(power_api.BROADCAST_ADDRESS, 2, power_api.NORMAL_MODE))
], 1))
controller = PowerController(PowerCommunicatorTest.FILE)
comm = self.__get_communicator(serial_mock, power_controller=controller)
comm.start()
self.assertEqual(controller.get_free_address(), 1)
comm.start_address_mode()
self.assertTrue(comm.in_address_mode())
time.sleep(0.5)
comm.stop_address_mode()
self.assertEqual(controller.get_free_address(), 3)
self.assertFalse(comm.in_address_mode())
def __do_address_mode(self):
""" This code is running in a thread when in address mode. """
expire = time.time() + self.__address_mode_timeout
address_mode = power_api.set_addressmode()
want_an_address_8 = power_api.want_an_address(power_api.POWER_API_8_PORTS)
want_an_address_12 = power_api.want_an_address(power_api.POWER_API_12_PORTS)
set_address = power_api.set_address()
# AGT start
data = address_mode.create_input(power_api.BROADCAST_ADDRESS,
self.__get_cid(),
power_api.ADDRESS_MODE)
self.__write_to_serial(data)
# Wait for WAA and answer.
while not self.__address_mode_stop and time.time() < expire:
try:
header, data = self.__read_from_serial()
waa_8 = want_an_address_8.check_header_partial(header)
waa_12 = want_an_address_12.check_header_partial(header)
if not waa_8 and not waa_12:
LOGGER.warning("Received non WAA/WAD message in address mode")
else:
(old_address, cid) = (ord(header[:2][1]), header[2:3])
# Ask power_controller for new address, and register it.
new_address = self.__power_controller.get_free_address()
if self.__power_controller.module_exists(old_address):
self.__power_controller.readdress_power_module(old_address, new_address)
else:
version = power_api.POWER_API_8_PORTS if waa_8 else power_api.POWER_API_12_PORTS
self.__power_controller.register_power_module(new_address, version)
# Send new address to power module
address_data = set_address.create_input(old_address, ord(cid), new_address)
self.__write_to_serial(address_data)
except CommunicationTimedOutException:
pass # Didn't receive a command, no problem.
except Exception as exception:
traceback.print_exc()
LOGGER.warning("Got exception in address mode: %s", exception)
# AGT stop
data = address_mode.create_input(power_api.BROADCAST_ADDRESS,
self.__get_cid(),
power_api.NORMAL_MODE)
self.__write_to_serial(data)
self.__address_mode = False
self.__address_thread = None
def test_address_mode(self):
""" Test the address mode. """
events = []
def handle_events(master_event):
events.append(master_event)
self.pubsub.subscribe_master_events(PubSub.MasterTopics.POWER, handle_events)
sad = power_api.set_addressmode(power_api.POWER_MODULE)
sad_p1c = power_api.set_addressmode(power_api.P1_CONCENTRATOR)
self.power_data.extend([
sin(sad.create_input(power_api.BROADCAST_ADDRESS, 1, power_api.ADDRESS_MODE)),
sin(sad_p1c.create_input(power_api.BROADCAST_ADDRESS, 2, power_api.ADDRESS_MODE)),
sout(power_api.want_an_address(power_api.POWER_MODULE).create_output(0, 0)),
sin(power_api.set_address(power_api.POWER_MODULE).create_input(0, 0, 1)),
sout(power_api.want_an_address(power_api.ENERGY_MODULE).create_output(0, 0)),
sin(power_api.set_address(power_api.ENERGY_MODULE).create_input(0, 0, 2)),
sout(power_api.want_an_address(power_api.P1_CONCENTRATOR).create_output(0, 0)),
sin(power_api.set_address(power_api.P1_CONCENTRATOR).create_input(0, 0, 3)),
sout(bytearray()), # Timeout read after 1 second
sin(sad.create_input(power_api.BROADCAST_ADDRESS, 3, power_api.NORMAL_MODE)),
sin(sad_p1c.create_input(power_api.BROADCAST_ADDRESS, 4, power_api.NORMAL_MODE))
])
self.serial.start()
self.communicator.start()
self.assertEqual(self.store.get_free_address(), 1)
self.communicator.start_address_mode()
self.assertTrue(self.communicator.in_address_mode())
self.pubsub._publish_all_events()
time.sleep(0.5)
assert [] == events
self.communicator.stop_address_mode()
self.pubsub._publish_all_events()
assert MasterEvent(MasterEvent.Types.POWER_ADDRESS_EXIT, {}) in events
assert len(events) == 1
self.assertEqual(self.store.get_free_address(), 4)
self.assertFalse(self.communicator.in_address_mode())
def __do_address_mode(self):
# type: () -> None
""" This code is running in a thread when in address mode. """
if self.__power_store is None:
self.__address_mode = False
self.__address_thread = None
return
expire = time.time() + self.__address_mode_timeout
address_mode = power_api.set_addressmode(power_api.ENERGY_MODULE)
address_mode_p1c = power_api.set_addressmode(power_api.P1_CONCENTRATOR)
want_an_address_8 = power_api.want_an_address(power_api.POWER_MODULE)
want_an_address_12 = power_api.want_an_address(power_api.ENERGY_MODULE)
want_an_address_p1c = power_api.want_an_address(
power_api.P1_CONCENTRATOR)
set_address = power_api.set_address(power_api.ENERGY_MODULE)
set_address_p1c = power_api.set_address(power_api.P1_CONCENTRATOR)
# AGT start
data = address_mode.create_input(power_api.BROADCAST_ADDRESS,
self.__get_cid(),
power_api.ADDRESS_MODE)
self.__write_to_serial(data)
data = address_mode_p1c.create_input(power_api.BROADCAST_ADDRESS,
self.__get_cid(),
power_api.ADDRESS_MODE)
self.__write_to_serial(data)
# Wait for WAA and answer.
while not self.__address_mode_stop and time.time() < expire:
try:
header, data = self.__read_from_serial()
if set_address.check_header_partial(
header) or set_address_p1c.check_header_partial(
header):
continue
version = None
if want_an_address_8.check_header_partial(header):
version = power_api.POWER_MODULE
elif want_an_address_12.check_header_partial(header):
version = power_api.ENERGY_MODULE
elif want_an_address_p1c.check_header_partial(header):
version = power_api.P1_CONCENTRATOR
if version is None:
logger.warning(
"Received unexpected message in address mode")
else:
(old_address, cid) = (header[:2][1], header[2:3])
# Ask power_controller for new address, and register it.
new_address = self.__power_store.get_free_address()
if self.__power_store.module_exists(old_address):
self.__power_store.readdress_power_module(
old_address, new_address)
else:
self.__power_store.register_power_module(
new_address, version)
# Send new address to module
if version == power_api.P1_CONCENTRATOR:
address_data = set_address_p1c.create_input(
old_address, ord(cid), new_address)
else:
# Both power- and energy module share the same API
address_data = set_address.create_input(
old_address, ord(cid), new_address)
self.__write_to_serial(address_data)
except CommunicationTimedOutException:
pass # Didn't receive a command, no problem.
except Exception as exception:
logger.exception("Got exception in address mode: %s",
exception)
# AGT stop
data = address_mode.create_input(power_api.BROADCAST_ADDRESS,
self.__get_cid(),
power_api.NORMAL_MODE)
self.__write_to_serial(data)
data = address_mode_p1c.create_input(power_api.BROADCAST_ADDRESS,
self.__get_cid(),
power_api.NORMAL_MODE)
self.__write_to_serial(data)
self.__address_mode = False