def _handle_ConnectionUp (self, event):
""" On datapath join, create a new LLDP packet per port """
assert event.dpid not in self._dps
if self.install_flow:
log.debug("Installing flow for %s (%d)", dpidToStr(event.dpid), event.dpid)
msg = of.ofp_flow_mod(match = of.ofp_match( dl_type = ethernet.LLDP_TYPE, dl_dst = NDP_MULTICAST))
msg.actions.append(of.ofp_action_output(port = of.OFPP_CONTROLLER)) # LC: send to the controller, when it get a LLDP msg
event.connection.send(msg)
self._dps.add(event.dpid) # LC: keep track of the sw that install the flows
# LC : printing port information
premapping = "/tmp/"
f = open(premapping + "sw-ports.txt", "a")
print " For ports:"
for p in event.ofp.ports:
print "%s %s %s " % (dpidToStr(event.dpid), p.port_no, p.hw_addr)
print >>f, "%s,%d,%s" % (dpidToStr(event.dpid), p.port_no, p.hw_addr)
f.close()
#LC: Collecting network topology
for p in event.ofp.ports:
info = Discovery.Sinfo(event.dpid, p.port_no, p.hw_addr)
if info not in self.swinfo:
self.swinfo[info] = time.time()
#LC: To the sender 'LLDPSender()' add the SW, parsing the dpid and the ports
#LC: def addSwitch (self, dpid, ports):
self._sender.addSwitch(event.dpid, [(p.port_no, p.hw_addr)
for p in event.ofp.ports])
def _handle_FlowStatsReceived(event):
stats = flow_stats_to_list(event.stats)
#log.debug("FlowStatsReceived from %s: %s", dpidToStr(event.connection.dpid), stats)
log.debug("FlowStatsReceived from %s", dpidToStr(self.connection.dpid))
for f in event.stats:
if tainted_hosts.has_key(str(f.match.dl_src)) or str(f.match.dl_src) in protected_resources:
print('***** storing statstics ******')
bytes_count = 0
flows_count = 0
packets_count = 0
dst = str(f.match.dl_dst)
src = str(f.match.dl_src)
bytes_count += f.byte_count
packets_count += f.packet_count
flows_count += 1
if src in protected_resources:
data_recvd_from_protected[dst] = bytes_count
if not tracked_flows.has_key(src + '-' + dst):
tracked_flows[src + '-' + dst] = [0,0,0]
(tracked_flows.get(src + '-' + dst))[0] = bytes_count
(tracked_flows.get(src + '-' + dst))[1] = packets_count
(tracked_flows.get(src + '-' + dst))[2] = flows_count
log.debug("traffic switch %s: %s bytes %s packets %s flows", dpidToStr(event.connection.dpid), bytes_count, packets_count, flows_count)
def _handle_portstats_received (event):
stats = flow_stats_to_list(event.stats)
ports_dpid = {}
ports_list = []
for p in stats:
ports = {}
ports['recvPackets'] = p['rx_packets']
ports['transmitPackets'] = p['tx_packets']
ports['transmitBytes'] = p['tx_bytes']
ports['PortNumber'] = p['port_no']
ports['recvBytes'] = p['rx_bytes']
ports_list.append(ports)
ports_dpid['ports'] = ports_list
ports_dpid['dpid'] = "00:00:" + dpidToStr(event.connection.dpid).replace('-',':')
storage_of_ports.append(ports_dpid)
log.debug("PortStatsReceived from %s: %s",
dpidToStr(event.connection.dpid), stats)
def _handle_flowstats_received (event):
stats = flow_stats_to_list(event.stats)
log.debug("FlowStatsReceived from %s: %s",
dpidToStr(event.connection.dpid), stats)
# Get number of bytes/packets in flows for web traffic only
# I have added: Save stats to a text file (output_file, or separate files )
web_bytes = 0
web_flows = 0
web_packet = 0
output_file=open("output.txt", "a+") #my own: open a text(canbeanyotherformat) file and append the stats in it (r+, w+, a+)
flows_file=open("flows.txt", "a+")
bytes_file=open("bytes.txt", "a+")
packets_file=open("packets.txt","a+")
for f in event.stats:
if f.match.tp_dst == 80 or f.match.tp_src == 80:
web_bytes += f.byte_count
web_packet += f.packet_count
web_flows += 1
log.info("Web traffic from %s: %s bytes (%s packets) over %s flows", dpidToStr(event.connection.dpid), web_bytes, web_packet, web_flows)
localtime = time.asctime( time.localtime(time.time()) ) # my own:to display local time
# my own:print in Output File
output_file.write( localtime + " Web traffic:" +" Bytes:"+ str(web_bytes)+ '\t'+" Packets:" + str(web_packet) +'\t'+" Flows:"+str(web_flows) +"\n") # my own:print in Output File
# write stats on separate files
flows_file.write( str(web_flows)+ "\n")
bytes_file.write( str(web_bytes)+ "\n")
packets_file.write(str(web_packet)+ "\n")
#my own: to close the file
output_file.close()
flows_file.close()
bytes_file.close()
packets_file.close()
def _handle_openflow_ConnectionUp (self, event):
sw = switches.get(event.dpid)
print "DPID for",event.dpid," = ",dpidToStr(event.dpid)
if sw is None:
# New switch
sw = Switch()
sw.dpid = event.dpid
switches[event.dpid] = sw
sw.connect(event.connection)
else:
sw.connect(event.connection)
dpids.append(event.dpid)
ports[dpidToStr(event.dpid)] = {}
print "Add ports to link status DB"
dpid_ts[event.dpid] = 0.000
dpid_latency[event.dpid] = 0.000
dpid_stats[event.dpid] = []
for p in event.ofp.ports:
port = [0.0, 100, 0]
ports[dpidToStr(event.dpid)][p.port_no] = port
"""
Tell all switches to forward latency packets to controller
"""
print "Connected to switch",dpidToStr(event.dpid)
connection = event.connection
match = of.ofp_match(dl_type = LAT_TYPE,dl_dst = pkt.ETHERNET.NDP_MULTICAST)
msg = of.ofp_flow_mod()
msg.priority = 65000
msg.match = match
msg.actions.append(of.ofp_action_output(port = of.OFPP_CONTROLLER))
connection.send(msg)
def _handle_switchdesc_received (event): global switch_desc event.connection.dpid switch_desc[dpidToStr(event.connection.dpid)]['hw_desc'] = event.stats.hw_desc switch_desc[dpidToStr(event.connection.dpid)]['sw_desc'] = event.stats.sw_desc switch_desc[dpidToStr(event.connection.dpid)]['mfr_desc'] = event.stats.mfr_desc switch_desc[dpidToStr(event.connection.dpid)]['serial_num'] = event.stats.serial_num
def _handle_flowstats_received (event):
stats = flow_stats_to_list(event.stats)
log.debug("FlowStatsReceived from %s: %s",
dpidToStr(event.connection.dpid), stats)
# print >> the_file, "FlowStatsReceived from " + dpidToStr(event.connection.dpid) ": " + stats
the_file.write("Time: " + time.asctime(time.localtime(time.time())) + "\n")
the_file.write("FlowStatsReceived from " + dpidToStr(event.connection.dpid) + ": " + str(stats) + "\n\n")
# for f in event.stats:
# if str(f.match.dl_dst) == "00:00:00:00:00:11":
# the_file.write("FlowStatsReceived from " + dpidToStr(event.connection.dpid) + ": " + str(f.match.dl_dst) + "\n")
# else:
# the_file.write("Mac removed from flow table" + "\n\n")
# Get number of bytes/packets in flows for web traffic only
web_bytes = 0
web_flows = 0
web_packet = 0
for f in event.stats:
if f.match.tp_dst == 80 or f.match.tp_src == 80:
web_bytes += f.byte_count
web_packet += f.packet_count
web_flows += 1
log.info("Web traffic from %s: %s bytes (%s packets) over %s flows",
dpidToStr(event.connection.dpid), web_bytes, web_packet, web_flows)
def find_latency(dpid):
for key in ports[dpidToStr(dpid)]:
if(key != 65534):
packet = of.ofp_packet_out(action = of.ofp_action_output(port = key))
packet.data = create_lat_pkt(dpid,key,ports[dpidToStr(dpid)][key][0])
#print "Sending to ",dpid," key ", key
core.openflow.sendToDPID(dpid, packet)
def handle_flows_redirection(cls, dpid, connections, switch_addresss, message):
""" Sends flow mod messages to redirect flows to created queues """
#print 'message from ' + str(switch_addresss)
#print 'Connections ' + str(dir(connections))
dpid = dpid[:len(dpid)-1]
dpid = dpid[len(dpid)-12:]
#print 'Received dpid: ' + str(dpid)
#print "message to be used for redirection" + str(message)
msg = of.ofp_flow_mod(command=of.OFPFC_DELETE)
msg.priority = 65535
#print "dpid parameter: " + str(dpid)
for connection in connections:
connection_dpid = connection.dpid
dpid_str = dpidToStr(connection_dpid)
dpid_str = dpid_str.replace("-", "")
#print 'Real dpid_str: ' + dpid_str
if dpid == dpid_str:
connection.send(msg)
#print 'Sent to: ' + str(connection)
#print 'Well...done'
for i in range(len(message['bw_list'])):
# We only want to redirect outgoing flows
if message['bw_list'][i]['action'] != 'OFPP_LOCAL':
my_match = of.ofp_match(dl_type = 0x800,nw_src=message['bw_list'][i]['nw_src'],nw_dst=message['bw_list'][i]['nw_dst'])
#print "Flow Match: " + str(my_match)
msg = of.ofp_flow_mod()
msg.match = my_match
msg.priority = 65535
msg.idle_timeout = 0
msg.hard_timeout = 0
msg.actions.append(of.ofp_action_enqueue(port=int(message['bw_list'][i]['action']), queue_id=int(message['queue_list'][i]['queueId'])))
#print "Flow mod message: " + str(msg)
#toDo: Check a better way to do this
#print "dpid parameter: " + str(dpid)
for connection in connections:
connection_dpid=connection.dpid
#print "Connection dpid: " + str(connection_dpid)
dpid_str=dpidToStr(connection_dpid)
dpid_str=dpid_str.replace("-", "")
#print 'Real dpid_str: ' + dpid_str
if dpid == dpid_str:
connection.send(msg)
global flow_mod_time
flow_mod_time = time.time()
print "Notification time: " + str(notification_time)
print "Flow stats reply: " + str(flow_stats_reply_time)
print "Queues done time: " + str(queues_done_time)
print "Flow mode time :" + str(flow_mod_time)
def _handle_PacketIn (event):
packet = event.parsed
if packet.effective_ethertype == LAT_TYPE:
"""
Handle incoming latency packets
"""
#print dpidToStr(event.dpid)
port = packet.src
[prevtime, swdpdest, swdpsrc] = packet.payload.split(',')
prevtime = float(prevtime)
currtime = time.time()
#print "PrevTime = ", prevtime, " CurrTime = ", currtime
dest_dpid = dpidToStr(event.dpid)
if dest_dpid == swdpdest:
#print "DPID matched"
latency = round((((currtime - prevtime)*1000) - dpid_latency[strToDPID(swdpsrc)] - dpid_latency[event.dpid]), 4)
#print "Latency =",latency
#swd = ports[dpidToStr(self.dpid)]
swd = ports[swdpsrc]
#for k in swd:
# if swd[k][0] == mac:
# break
k = 0
for p in switch_adjacency[strToDPID(swdpsrc)]:
if swdebug:
print swdpsrc,"\n",switch_adjacency[strToDPID(swdpsrc)]
if switch_adjacency[strToDPID(swdpsrc)][p] is event.dpid:
if swdebug:
print "matches with",dpidToStr(event.dpid)," when p = ",p
k = p
if latency >=0:
if k in ports[swdpsrc]:
ports[swdpsrc][k][0] = latency
return
def _handle_PacketIn(self, event):
packet = event.parsed
if packet.dst.is_multicast:
return
# Learn the source and fill up routing table
# self.table[(event.connection,packet.src)] = event.port
# dst_port = self.table.get((event.connection,packet.dst))
print("Switch {} has no flow for dst {} or src {}".format(
dpidToStr(event.dpid),packet.dst,packet.src))
# setup reverse flow:
# "Every packet with dst=packet.src should go out event.port of
# event.connection"
# arp = packet.find('arp')
dst_port = self.find_edge_port(event.dpid)
if not dst_port:
log.warning("Switch {} could not find edge port".format(
dpidToStr(event.dpid)))
return
self.install_flow(event.dpid, dst_port, src=packet.src)
self.send_packet(event, dst_port)
def _handle_ConnectionUp(self, event):
# Use dpid to differentiate between switches (datapath-id)
# Each switch has its own flow table. As we'll see in this
# example we need to write different rules in different tables.
dpid = dpidToStr(event.dpid)
log.debug("Switch %s has come up.", dpid)
""" Add your logic here """
# We load openflow entries depending of the switch dpid.
# rememeber that this function is trigered every time a switch is connected to the controller.
if ( dpid == '00-00-00-00-00-01' ):
msg_1p1 = of.ofp_flow_mod()
msg_1p1.match.in_port = 1
msg_1p1.actions.append(of.ofp_action_output(port = 3))
log.info("Rule for %s and port %i", dpidToStr(event.dpid), msg_1p1.match.in_port)
# send the rule to the switch
event.connection.send(msg_1p1)
# inPort - 3
# we also are able to declare everything in one line as follow:
msg_1p3 = of.ofp_flow_mod( match = of.ofp_match ( in_port = 3),
action = of.ofp_action_output (port = 1))
event.connection.send(msg_1p3)
# inPort - 2
msg_1p2 = of.ofp_flow_mod( match = of.ofp_match ( in_port = 2),
action = of.ofp_action_output (port = 4))
event.connection.send(msg_1p2)
# inPort - 4
msg_1p4 = of.ofp_flow_mod( match = of.ofp_match ( in_port = 4),
action = of.ofp_action_output(port = 2))
event.connection.send(msg_1p4)
elif ( event.dpid == 4 ): # I can also use dpid as Integer
# 1 to 3
msg_4p1 = of.ofp_flow_mod( match = of.ofp_match ( in_port = 1),
action = of.ofp_action_output (port = 3))
event.connection.send(msg_4p1)
# 3 to 1
msg_4p3 = of.ofp_flow_mod( match = of.ofp_match ( in_port = 3),
action = of.ofp_action_output (port = 1))
event.connection.send(msg_4p3)
# 2 to 4
msg_4p2 = of.ofp_flow_mod( match = of.ofp_match ( in_port = 2),
action = of.ofp_action_output (port = 4))
event.connection.send(msg_4p2)
# 4 to 2
msg_4p4 = of.ofp_flow_mod( match = of.ofp_match ( in_port = 4),
action = of.ofp_action_output (port = 2))
event.connection.send(msg_4p4)
# elif ( dpid == '00-00-00-00-00-02' ) or ( dpid == '00-00-00-00-00-03' ):
else:
msg = of.ofp_flow_mod()
msg.match.in_port = 1
msg.actions.append(of.ofp_action_output(port = 2))
event.connection.send(msg)
msg = of.ofp_flow_mod()
msg.match.in_port = 2
msg.actions.append(of.ofp_action_output(port = 1))
event.connection.send(msg)
def create_lat_pkt(dpid, port):
pkt1 = pkt.ethernet(type=LAT_TYPE)
for l in core.openflow_discovery.adjacency:
if ((l.dpid1 == dpid) and (l.port1 == port)):
#print "Sending for",l
pkt1.dst = pkt.ETHERNET.NDP_MULTICAST #need to decide
pkt1.payload = str(time.time()) + ',' + dpidToStr(l.dpid2) + ',' + dpidToStr(l.dpid1)
return pkt1.pack()
def DeleteRule (event, dl_type=0x800, nw_proto=1, port=0, src_port=of.OFPP_ALL):
try:
del firewall[(event.connection,dl_type,nw_proto,port,src_port)]
log.debug("Deleting firewall rule in %s: %s %s %s %s" %
dpidToStr(event.connection.dpid), dl_type, nw_proto, port, src_port)
except KeyError:
log.error("Cannot find in %s: %s %s %s %s" %
dpidToStr(event.connection.dpid), dl_type, nw_proto, port, src_port)
def _handle_PacketIn (self, event):
#Parsing Incoming packet
packet = event.parsed
#Updating mac-table to port-mapping
self.macToPortMap[packet.src] = event.port
#Flooding Function
def flood():
print "[+] Debug: Flooding"
msg = of.ofp_packet_out()
msg.actions.append(of.ofp_action_output(port = of.OFPP_FLOOD))
msg.in_port = event.port
msg.buffer_id = event.ofp.buffer_id
self.connection.send(msg)
#Dropping Function
def drop():
print "[+] Debug: Dropping Packets"
msg = of.ofp_flow_mod()
msg.match = of.ofp_match.from_packet(packet)
msg.idle_timeout = 10
msg.hard_timeout = 30
msg.buffer_id = event.ofp.buffer_id
self.connection.send(msg)
#Forwarding Function
def forward():
print "[+] Debug: Forwarding"
#TODO - WILL CODE
msg = of.ofp_flow_mod()
msg.match.dl_src = packet.src
msg.match.dl_dst = packet.dst
msg.idle_timeout = 10
msg.hard_timeout = 30
msg.actions.append(of.ofp_action_output(port = outport))
msg.buffer_id = event.ofp.buffer_id
self.connection.send(msg)
#Check if Packet has not been mapped
if packet.dst not in self.macToPortMap:
#switch does not know egress port
#Flood the packet
log.debug("[-] Debug: Port for %s unknown -- Flooding" % (packet.dst,))
print "[+] Debug: Port for %s unknown -- Flooding" % (packet.dst,)
flood()
#If it has then forward the packet unless its destination is the same port its been received on
else:
#Forward packet if SW knows outprt
outport = self.macToPortMap[packet.dst]
if outport == event.port:
log.warning("[-] Same port for packet from %s -> %s on %s/ Drop." %
(packet.src, packet.dst, outport), dpidToStr(event.dpid))
print "[-] Same port for packet from %s -> %s on %s/ Drop." % (packet.src, packet.dst, outport)
drop()
return
log.debug("[F] Installing flow for %s port:%i -> %sport:%i" %
(packet.src, event.port, packet.dst, outport), dpidToStr(event.dpid))
print "[F] Debug: Installing flow:\n %s port:%i -> %s port:%i \n on Switch:" % (packet.src, event.port, packet.dst, outport), dpidToStr(event.dpid)
log.debug("[+] Port for %s known -- Forwarding" % (packet.dst,))
print "[+] Debug: Port for %s known -- Forwarding" % (packet.dst,)
#Forward the packet if in MacToPortMap map
forward()
def _handle_openflow_ConnectionDown (self, event):
#print "CD"
#Remove Host when Switch gets down
for l in self.links:
if l[0] == dpidToStr(event.dpid):
print 'l:',l
self.hosts.remove(l[1])
self.switches.remove(dpidToStr(event.dpid))
self.send_table()
def _calc_paths ():
####### CHANGED PART ########
# access monitoring server and get distance_map
import xmlrpclib
# TODO change the Server IP and Port to the command line option
monitoring_server = xmlrpclib.ServerProxy("http://133.1.134.225:8000")
distance_map = monitoring_server.request_link_distance()
##############################
"""
Essentially Floyd-Warshall algorithm
"""
sws = switches.values()
# return list of values to sws [dpid1,dpid2,dpid3,dpid3]
path_map.clear()
for k in sws:
# pick up the [sw1][sw2] , port_number
for j,port in adjacency[k].iteritems():
if port is None: continue
####### CHANGED PART #############
k_dpid = (dpidToStr(k.dpid)).replace("-","")
j_dpid = (dpidToStr(j.dpid)).replace("-","")
if j_dpid not in distance_map[k_dpid]:
path_distance = distance_map[j_dpid][k_dpid]
else:
path_distance = distance_map[k_dpid][j_dpid]
path_map[k][j] = (path_distance, None)
####################################
path_map[k][k] = (0,None) # distance, intermediate
"""
for i in sws:
for j in sws:
a = path_map[i][j][0]
#a = adjacency[i][j]
if a is None: a = "*"
print a,
print
"""
for k in sws:
for i in sws:
for j in sws:
if path_map[i][k][0] is not None:
if path_map[k][j][0] is not None:
# i -> k -> j exists
ikj_dist = path_map[i][k][0]+path_map[k][j][0]
if path_map[i][j][0] is None or ikj_dist < path_map[i][j][0]:
# i -> k -> j is better than existing
path_map[i][j] = (ikj_dist, k)
print "--------------------"
for i in sws:
for j in sws:
print path_map[i][j][0],
print
def _handle_openflow_ConnectionDown(self, event):
sw = self.topology.getEntityByID(event.dpid)
if sw is None:
log.warn("Switch %s disconnected, but... it doesn't exist!" % (dpidToStr(event.dpid),))
else:
if sw.connection is None:
log.warn("Switch %s disconnected, but... it's wasn't connected!" % (dpidToStr(event.dpid),))
sw.connection = None
log.info("Switch " + str(event.dpid) + " disconnected")
def _handle_PacketIn (self, event):
"""
Handles packet in messages from the switch.
"""
return
#log.debug("incoming package")
dpid = event.connection.dpid
inport = event.port
packet = event.parsed # This is the parsed packet data.
if not packet.parsed:
log.warning("Ignoring incomplete packet")
return
def flood ():
""" Floods the packet """
return
log.debug("flood was called")
if event.ofp.buffer_id == -1:
log.warning("Not flooding unbuffered packet on %s",
dpidToStr(event.dpid))
return
msg = of.ofp_packet_out()
if time.time() - self.connection.connect_time > FLOOD_DELAY:
# Only flood if we've been connected for a little while...
#log.debug("%i: flood %s -> %s", event.dpid, packet.src, packet.dst)
msg.actions.append(of.ofp_action_output(port = of.OFPP_FLOOD))
else:
pass
#log.info("Holding down flood for %s", dpidToStr(event.dpid))
msg.buffer_id = event.ofp.buffer_id
msg.in_port = event.port
#self.connection.send(msg)
#packet_in = event.ofp # The actual ofp_packet_in message.
# Comment out the following line and uncomment the one after
# when starting the exercise.
#self.act_like_hub(packet, packet_in)
#self.act_like_switch(packet, packet_in)
#log.warning("Traffic in SW: %s -> %s on %s. Drop." % (packet.src, packet.dst, event.port), dpidToStr(event.dpid))
#log.debug("Traffic in SW: %s -> %s on %s. Drop." % (packet.src, packet.dst, event.port))
if packet.dst.isMulticast():
flood() # 3a
else:
if packet.type == 0x0800:
ip_packet = packet.next
log.debug("Is Ethernet package")
if ip_packet.protocol == 0x01:
icmp_packet = ip_packet.next
log.debug("Is ICMP package")
log.debug("SW:%s InPort:%i IP %s => %s", dpidToStr(event.dpid), inport, str(ip_packet.srcip), str(ip_packet.dstip))
if ip_packet.protocol == 0x17:
udp_packet = ip_packet.next
log.debug("Is UDP package")
log.debug("SW:%s InPort:%i IP %s => %s", dpidToStr(event.dpid), inport, str(ip_packet.srcip), str(ip_packet.dstip))
log.debug("SW:%s InPort:%i Eth %s => %s", dpidToStr(event.dpid), inport, str(packet.src), str(packet.dst))
def handle_PortStatsReceived (event):
#Handles port stats event.
#self.stats = event.stats
print "Switch",dpidToStr(event.dpid)
log.debug("PortStatsReceived")
for portStats in event.stats:
ports[dpidToStr(event.dpid)][portStats.port_no][rx] = portStats.rx_dropped
ports[dpidToStr(event.dpid)][portStats.port_no][tx] = portStats.tx_dropped
def perform(self, event):
print 'Unhandled event: ',
if isinstance(event, ConnectionUp):
print 'ConnectionUp from switch %s' % dpidToStr(event.dpid)
elif isinstance(event, ConnectionDown):
print 'ConnectionDown from switch %s' % dpidToStr(event.dpid)
elif isinstance(event, PacketIn):
print 'PacketIn from switch %s [%d]' % (dpidToStr(event.dpid), event.port)
else:
print event
def calculate_PLR(dpid, port_stat):
port_dropped = port_stat.tx_dropped - ports[dpidToStr(dpid)][port_stat.port_no][PREV_TX_DROPPED]
port_tx_pkts = port_stat.tx_packets - ports[dpidToStr(dpid)][port_stat.port_no][PREV_TX_PKTS]
try:
port_plr = port_dropped / port_tx_pkts * 100
except ZeroDivisionError:
print "ERROR: No packets has been sent!!!"
port_plr = 0
ports[dpidToStr(dpid)][port_stat.port_no][PREV_TX_DROPPED] = port_stat.tx_dropped
ports[dpidToStr(dpid)][port_stat.port_no][PREV_TX_PKTS] = port_stat.tx_packets
ports[dpidToStr(dpid)][port_stat.port_no][TX_PLR] =port_stat.tx_packets
def _handle_ConnectionUp(event):
global s1_dpid, s2_dpid
print "ConnectionUp: ",
dpidToStr(event.connection.dpid)
# remember the connection dpid for switch
for m in event.connection.features.ports:
if m.name == "s1-eth1":
s1_dpid = event.connection.dpid
print "s1_dpid=", s1_dpid
elif m.name == "s2-eth1":
s2_dpid = event.connection.dpid
print "s2_dpid=", s2_dpid
def __init__(self,event):
self.connection = event.connection
self.dpid = event.connection.dpid
dpids.append(self.dpid)
ports[dpidToStr(event.dpid)] = {}
print "Add ports to link status DB"
dpid_ts[self.dpid] = 0.000
dpid_latency[self.dpid] = 0.000
dpid_stats[self.dpid] = []
for p in event.ofp.ports:
port = [str(p.hw_addr), 0.0, 100, 0, 0]
ports[dpidToStr(event.dpid)][p.port_no] = port
def handle_QueueStatsReceived (event):
#Handles port stats event.
#self.stats = event.stats
# print "Switch",dpidToStr(event.dpid)
log.debug("QueueStatsReceived")
# print "Queue stats received"
for qStats in event.stats:
if qStats.port_no in ports[dpidToStr(event.dpid)]:
qSt = qStats.tx_errors - ports[dpidToStr(event.dpid)][qStats.port_no][tx]
ports[dpidToStr(event.dpid)][qStats.port_no][tx] = qSt
def _handle_ConnectionUp(self, event):
# Use dpid to differentiate between switches (datapath-id)
# Each switch has its own flow table. As we'll see in this
# example we need to write different rules in different tables.
dpid = dpidToStr(event.dpid)
log.debug("Switch %s has come up.", dpid)
""" Add your logic here """
fms = []
if dpid == "00-00-00-00-00-01" or dpid == "00-00-00-00-00-04":
fm = of.ofp_flow_mod()
fm.match.in_port = 3
fm.actions.append(of.ofp_action_output(port = 1))
fms.append(fm)
fm = of.ofp_flow_mod()
fm.match.in_port = 1
fm.actions.append(of.ofp_action_output(port = 3))
fms.append(fm)
fm = of.ofp_flow_mod()
fm.match.in_port = 4
fm.actions.append(of.ofp_action_output(port = 2))
fms.append(fm)
fm = of.ofp_flow_mod()
fm.match.in_port = 2
fm.actions.append(of.ofp_action_output(port = 4))
fms.append(fm)
if dpid == "00-00-00-00-00-02" or dpid == "00-00-00-00-00-03":
"""
fm = of.ofp_flow_mod()
fm.actions.append(of.ofp_action_output(port = of.OFPP_FLOOD))
fms.append(fm)
"""
fm = of.ofp_flow_mod()
fm.match.in_port = 1
fm.actions.append(of.ofp_action_output(port = 2))
fms.append(fm)
fm = of.ofp_flow_mod()
fm.match.in_port = 2
fm.actions.append(of.ofp_action_output(port = 1))
fms.append(fm)
for fm in fms:
event.connection.send(fm)
log.debug("Slicing rules installed on %s", dpidToStr(event.dpid))
def _handle_LinkEvent (self, event):
s1 = event.link.dpid1
s2 = event.link.dpid2
if s1 > s2:
s1,s2 = s2,s1
s1 = dpidToStr(s1)
s2 = dpidToStr(s2)
if event.added:
self.links.add((s1,s2))
elif event.removed and (s1,s2) in self.links:
self.links.remove((s1,s2))
log.debug("Discovered Link Event between %s and %s.", s1, s2)
def _handle_openflow_discovery_LinkEvent (self, event):
#print "LE"
s1 = event.link.dpid1
s2 = event.link.dpid2
if s1 > s2: s1,s2 = s2,s1
s1 = dpidToStr(s1)
s2 = dpidToStr(s2)
if event.added:
self.links.add((s1,s2))
elif event.removed and (s2,s2) in self.links:
self.links.remove((s1,s2))
self.send_table()
def _handle_openflow_ConnectionUp(self, event):
sw = self.topology.getEntityByID(event.dpid)
add = False
if sw is None:
sw = OpenFlowSwitch(event.dpid)
add = True
else:
if sw.connection is not None:
log.warn("Switch %s connected, but... it's already connected!" % (dpidToStr(event.dpid),))
sw._setConnection(event.connection, event.ofp)
log.info("Switch " + dpidToStr(event.dpid) + " connected")
if add:
self.topology.addEntity(sw)
sw.raiseEvent(SwitchJoin, sw)
def create_eco_subnet():
global phy_topology
switchNum = POD_NUM**3/4 + 1
p_edge_top = POD_NUM**3/4 + 1 + POD_NUM + POD_NUM**2/2
p_edge_bottom = p_edge_top + POD_NUM**2/2
all_path = nx.shortest_path(phy_topology,dpidToStr(switchNum))
for edge_num in range(p_edge_top,p_edge_bottom):
path = all_path[dpidToStr(edge_num)]
_init_check_switch(path)
for s1,s2 in zip(path[:-1],path[1:]):
if _check_path(s1,s2)==False:
exit
def _log_if_first_or_end_node(self, event):
if event.dpid == 2 and self.switched:
message = "B-Packet_In DPID:%s Time: %s " % (dpidToStr(
event.dpid), get_time_now())
elif event.dpid == 2 and not self.switched:
message = "A-Packet_In DPID:%s Time: %s " % (dpidToStr(
event.dpid), get_time_now())
elif event.dpid == 3 and event.port == 1 and self.switched:
message = "B-Packet_In DPID:%s Time: %s " % (dpidToStr(
event.dpid), get_time_now())
elif event.dpid == 3 and event.port == 1 and not self.switched:
message = "A-Packet_In DPID:%s Time: %s " % (dpidToStr(
event.dpid), get_time_now())
else:
return
self.logger(message)
def _handle_PacketIn (self, event):
eth_packet = event.parsed
in_port = event.port
# assuming that switches do not have any forwarding rule pre-installed
# so the first packet from a host will travel to controller
# it is a rough logic to discover host, it can be improved
if not eth_packet.parsed:
return
src_mac = eth_packet.src
if eth_packet.type == ethernet.ARP_TYPE:
arp_packet = eth_packet.payload
if not arp_packet.hwsrc == src_mac:
return
src_ip = arp_packet.protosrc
if src_ip == IP_ANY:
return
elif eth_packet.type == ethernet.IP_TYPE:
ip_packet = eth_packet.payload
src_ip = ip_packet.srcip
if src_ip == IP_ANY:
return
else:
return
if not hosts[str(src_ip)]:
hosts[str(src_ip)]['mac'] = str(src_mac)
hosts[str(src_ip)]['switch'] = dpidToStr(event.connection.dpid)
hosts[str(src_ip)]['last_time_seen'] = int(time.time())
hosts[str(src_ip)]['in_port'] = in_port
def _handle_ConnectionUp(self, event):
def _setup_flow(iport, oport):
msg = of.ofp_flow_mod()
msg.match.in_port = iport
msg.actions.append(of.ofp_action_output(port=oport))
event.connection.send(msg)
def _setup_session(s, t):
_setup_flow(s, t)
_setup_flow(t, s)
# Use dpid to differentiate between switches (datapath-id)
# Each switch has its own flow table. As we'll see in this
# example we need to write different rules in different tables.
dpid = dpidToStr(event.dpid)
log.debug("------------ Switch %s has come up.", dpid)
""" Add your logic here """
# Upper Slide
# h1 <-s1-s2-s4-> h3
if event.dpid == 1:
_setup_session(1, 3)
_setup_session(2, 4)
if event.dpid == 2:
_setup_session(1, 2)
if event.dpid == 3:
_setup_session(1, 2)
if event.dpid == 4:
_setup_session(1, 3)
_setup_session(2, 4)
log.debug("------------ Setup Rules for %s done.", dpid)
def _handle_openflow_PacketIn(self, event):
dpid = event.dpid
packet = event.parsed
port = event.port
etype = packet.type
log.debug("PacketIn from %s, EtherType=%#x", dpidToStr(event.dpid),
etype)
if etype == ethernet.IP_TYPE:
self.raiseEvent(ViroPacketInIP, dpid, port, packet)
elif etype == ethernet.IPV6_TYPE:
self.raiseEvent(ViroPacketInIPV6, dpid, port, packet)
elif etype == ethernet.LLDP_TYPE:
self.raiseEvent(ViroPacketInLLDP, dpid, port, packet)
elif etype == ethernet.ARP_TYPE:
self.raiseEvent(ViroPacketInARP, dpid, port, packet)
elif etype == viro.VIRO_TYPE:
packet = viro(packet.raw)
viro_payload = packet.payload
if isinstance(viro_payload, viroctrl):
self.raiseEvent(ViroPacketInVIROCtrl, dpid, port, packet)
else:
self.raiseEvent(ViroPacketInVIROData, dpid, port, packet)
else:
log.debug("Unknown packet type %#x", etype)
def calc_qos_index(traffic_type):
create_neighbourhood_matrix()
tos_constants = QOS_weights[traffic_type]
if swdebug:
print "Initialized constants. Finding cost now"
sw_latency_map = {}
QOS_indices[traffic_type] = {}
for switch in dpids:
QOS_indices[switch] = {}
switchStr = dpidToStr(switch)
sw_latency_map = ports[switchStr]
port_list = []
link_costs = {}
for port in switch_neighbourhood[switch]:
port_list = sw_latency_map[port]
dest_switch = switch_neighbourhood[switch][port]
l = port_list[latency]
b = port_list[bw]
t = port_list[tx]
n = 0
if traffic_type is not "best_effort":
n = 1
cost = (tos_constants[0] * b) + n * ((tos_constants[1] * l) +
(tos_constants[2] * t))
link_costs[dest_switch] = cost
QOS_indices[traffic_type][switch] = link_costs
return QOS_indices[traffic_type]
def _handle_port_stats(event):
global start_time
global network
port_stats = flow_stats_to_list(event.stats)
#log.debug(port_stats)
for node in network:
if (dpidToStr(
event.dpid) == network[node]["MAC"]): # find which switch
for link in network[node][
"link"]: # for each link connected to this switch
try:
# calculate updated congestion value
link["cong_value"] = MBPS * (
port_stats[link["out_port"]]["tx_bytes"] -
link["prev_tx_bytes"])
# has controller just started up?
if ((datetime.now() - start_time).total_seconds() >
WAIT_FOR_STARTUP):
log.debug("\nBW on node %s, port %s: (Mbps): %s\n",
node, link["out_port"], link["cong_value"])
if (link["cong_value"] >
CONG_THRESH): # congestion detected
log.debug("\nCongestion on node %s, port %s\n",
node, link["out_port"])
# store tx_bytes for next iteration
link["prev_tx_bytes"] = port_stats[
link["out_port"]]["tx_bytes"]
except IndexError:
pass
def issue_switch_meas(self, event):
# TODO: Maybe consider entire vector to the StateMachine object?
# Extract the switch id from the event info
switchId = dpidToStr(event.connection.dpid)
switchNo = int(switchId[-1])
# iterate over the event info and generate the flow vector
# initialize the measurement vector
#measurement = np.zeros((self.num_flows,1))
# loop over the flow numbers and write the value to the measurement vector
for f in event.stats:
for i in range(8):
addressFrom = "10.0.0." + str(i)
for j in range(8):
addressTo = "10.0.0." + str(j)
# Should I check for looping back?
if f.match.nw_dst == IPAddr(
addressFrom) and f.match.nw_src == IPAddr(
addressTo):
if i != j:
#print 'The index = ' + str(self.filter.ComputeFlowNum(i, j))
#print 'The switch number = ' + str(switchNo)
self.filter.UpdateMeasurement(
self.filter.ComputeFlowNum(i, j), switchNo,
f.byte_count)
#measurement[self.filter.ComputeFlowNum(i, j),1] = f.byte_count
return switchNo
def handle_aggregateflowstats_received(event):
agg_stat = event.stats
log.info(
"AggregateFlowStatsReceived from %s: %s bytes (%s packets) over %s flows",
dpidToStr(event.connection.dpid), agg_stat.byte_count,
agg_stat.packet_count, agg_stat.flow_count)
def _handle_openflow_ConnectionUp(self, event):
sw = self.topology.getEntityByID(event.dpid)
add = False
if sw is None:
sw = OpenFlowSwitch(event.dpid)
add = True
else:
if sw._connection is not None:
log.warn(
"Switch %s connected, but... it's already connected!" %
(dpidToStr(event.dpid), ))
sw._setConnection(event.connection, event.ofp)
log.info("Switch " + dpidToStr(event.dpid) + " connected")
if add:
self.topology.addEntity(sw)
sw.raiseEvent(SwitchJoin, sw)
def flow_flush():
msg = of.ofp_flow_mod(command=of.OFPFC_DELETE)
for connection in core.openflow.connections:
connection.send(msg)
log.info("-> Clearing all flows from %s!" %
(dpidToStr(connection.dpid), ))
def list_switches(ofnexus=None):
if ofnexus is None:
from pox.core import core
ofnexus = core.openflow
r = []
for dpid, con in ofnexus._connections.iteritems():
ports = []
for p in con.features.ports:
ports.append({
'port_no': p.port_no,
'hw_addr': str(p.hw_addr),
'name': p.name
})
ports.sort(key=lambda item: item['port_no'])
rr = {
'dpid': dpidToStr(dpid),
'n_tables': con.features.n_tables,
'ports': ports
}
r.append(rr)
r.sort(key=lambda item: item['dpid'])
return r
def transform_key(d):
newd = dict()
for k,v in d.items():
if isinstance(v, dict):
v = transform_key(v)
newd[dpidToStr(k)] = v
return newd
def _handle_ConnectionUp(event):
msg = OutMessage()
msg.set_policy("netasm.examples.netasm.standalone.hub")
event.connection.send(msg)
log.info("netasm.examples.netasm.standalone.hub for %s", dpidToStr(event.dpid))
def list_switches(ofnexus=None):
#FELIPE TOMM - TCC
#Lista os Switches em JSON
if ofnexus is None:
from pox.core import core
ofnexus = core.openflow
r = []
for dpid, con in ofnexus._connections.iteritems():
ports = []
for p in con.ports.values():
pdict = {
'port_no': p.port_no,
'hw_addr': str(p.hw_addr),
'name': p.name
}
for bit, name in of.ofp_port_config_map.items():
if p.config & bit:
pdict[name.split('OFPPC_', 1)[-1].lower()] = True
for bit, name in of.ofp_port_state_map.items():
if p.state & bit:
pdict[name.split('OFPPS_', 1)[-1].lower()] = True
ports.append(pdict)
ports.sort(key=lambda item: item['port_no'])
rr = {
'dpid': dpidToStr(dpid),
'n_tables': con.features.n_tables,
'ports': ports
}
r.append(rr)
r.sort(key=lambda item: item['dpid'])
return r
def _handle_ConnectionUp(self, event):
current_switch = "s%s" % event.dpid
for i in range(0, 4):
# making rules based on MAC addresses
match = of.ofp_match()
match.dl_dst = EthAddr(host_MACs[i])
next_step = next_in_path(current_switch, hosts[i])
out_port = ports[current_switch][next_step]
# create a new flow table modification message
msg = of.ofp_flow_mod()
# assign this flow table message's match condition to the one above
msg.match = match
# make the action for this msg
msg.actions.append(of.ofp_action_output(port=out_port))
# send the flow table entry to the switch
event.connection.send(msg)
# making rules for ARP packets based on IP addresses
match = of.ofp_match()
match.dl_type = 0x806
match.nw_dst = IPAddr(host_IPs[i])
next_step = next_in_path(current_switch, hosts[i])
out_port = ports[current_switch][next_step]
# create a new flow table modification message
msg = of.ofp_flow_mod()
# assign this flow table message's match condition to the one above
msg.match = match
# make the action for this msg
msg.actions.append(of.ofp_action_output(port=out_port))
# send the flow table entry to the switch
event.connection.send(msg)
log.debug("Dijkstra installed on %s", dpidToStr(event.dpid))
def handle_flowstats_received(self, event):
#global web_bytes, web_packet
stats = flow_stats_to_list(event.stats)
log.debug("FlowStatsReceived from %s: %s",
dpidToStr(event.connection.dpid), stats)
#web_flows = 0
for f in event.stats:
# if f.match.tp_dst == 80 or f.match.tp_src == 80:
# if f.match.nw_dst == IPAddr("10.0.0.1"):
self.web_bytes += f.byte_count
self.web_packet += f.packet_count
self.web_flows += 1
log.info("Flow traffic from %s: %s bytes (%s packets) over %s flows",
dpidToStr(event.connection.dpid), self.web_bytes,
self.web_packet, self.web_flows)
def _handle_ConnectionUp(self, event):
print "switch dpid " + str(
event.dpid
) #it prints the switch connection information, on the screen
print "Hex dpid: " + str(dpidToStr(event.dpid))
self.myconnections.append(
event.connection) # will pass as a reference to above
def _handle_ConnectionUp(self, event):
# Use dpid to differentiate between switches (datapath-id)
# Each switch has its own flow table. As we'll see in this
# example we need to write different rules in different tables.
dpid = dpidToStr(event.dpid)
log.debug("Switch %s has come up.", dpid)
if dpid in self.portmap:
# Writing drop rules at edge switches itself should suffice.
# It's always better to keep the complexity at edge of the network. (recall NVP)
log.debug("Writing drop rules for switch %s.", dpid)
for (srcmac, dstmac) in self.portmap[dpid]:
msg = of.ofp_flow_mod()
msg.priority = 200
# We need to drop packets coming from <inport> and destined for <dstmac>
msg.match.dl_src = srcmac
msg.match.dl_dst = dstmac
event.connection.send(msg)
# No forwarding action implies drop action
# Write flood rules for rest of the traffic
log.debug("Writing flood rules for %s.", dpid)
msg = of.ofp_flow_mod()
msg.priority = 100
msg.actions.append(of.ofp_action_output(port=of.OFPP_FLOOD))
event.connection.send(msg)
log.debug("Slicing rules installed on %s", dpid)
def sw_HostPorts(
): ####for ARP requests. Has dpid as key and ports as values.(Function can be relocated)
create_neighbourhood_matrix()
for dpid in dpids:
host_ports[dpid] = []
for p in ports[dpidToStr(dpid)].keys():
if p == 65534:
continue
flag = False
for switchp in switch_neighbourhood[dpid].keys():
if p is switchp:
flag = True
if flag is False:
host_ports[dpid].append(p)
if swdebug:
print "Host port for", dpidToStr(dpid), " = ", host_ports[dpid]
def _handle_ConnectionUp(self, event):
log.info("Switch %s has come up.", dpid_to_str(event.dpid))
csvfile = open('/home/mininet/pox/pox/misc/firewall-policies.csv',
'rb')
black_list = []
total_row = 0
for row in csv.reader(csvfile, delimiter=','):
black_list.append(row)
total_row = total_row + 1
for i in range(1, total_row):
compare = black_list[i][1] + black_list[i][2]
log.info("TTTT %s", EthAddr(black_list[i][1]))
msg = of.ofp_flow_mod()
msg.match.dl_dst = EthAddr(black_list[i][1])
msg.match.dl_src = EthAddr(black_list[i][2])
msg.priority = 100
msg.actions.append(of.ofp_action_output(port=of.OFPP_NONE))
event.connection.send(msg)
'''
msg2 = of.ofp_flow_mod()
msg2.match.dl_src=EthAddr(black_list[i][1])
msg2.match.dl_dst=EthAddr(black_list[i][2])
msg2.idle_timeout = 10
msg2.hard_timeout = 30
msg2.priority = 100
msg2.actions.append(of.ofp_action_output(port = of.OFPP_NONE))
msg2.data = event.ofp # 6a
event.connection.send(msg2)
'''
log.info("Firewall rules installed on %s", dpidToStr(event.dpid))
def _handle_ConnectionUp(self, event):
sw = self.switches.get(event.dpid)
sw_str = dpidToStr(event.dpid)
log.info("Saw switch come up: %s", sw_str)
name_str = self.t.id_gen(dpid=event.dpid).name_str()
if name_str not in self.t.switches():
log.warn("Ignoring unknown switch %s" % sw_str)
return
if sw is None:
log.info("Added fresh switch %s" % sw_str)
sw = Switch()
self.switches[event.dpid] = sw
sw.connect(event.connection)
else:
log.info("Odd - already saw switch %s come up" % sw_str)
sw.connect(event.connection)
sw.connection.send(of.ofp_set_config(miss_send_len=MISS_SEND_LEN))
if len(self.switches) == len(self.t.switches()):
log.info("Woo! All switches up")
self.all_switches_up = True
if self.mode == 'proactive':
self._install_proactive_flows()
if self.mode == 'hybrid':
self._install_hybrid_static_flows()
def _handle_ConnectionUp(self, event):
sw = self.switches.get(event.dpid)
sw_str = dpidToStr(event.dpid)
self.con = event.connection
self.mac = self.con.eth_addr
log.info("Saw switch come up: %s", sw_str)
name_str = self.t.id_gen(dpid=event.dpid).name_str()
if name_str not in self.t.switches():
log.warn("Ignoring unknown switch %s" % sw_str)
return
if sw is None:
log.info("Added fresh switch %s" % sw_str)
sw = Switch()
self.switches[event.dpid] = sw
sw.connect(event.connection)
else:
log.info("Odd - already saw switch %s come up" % sw_str)
sw.connect(event.connection)
sw.connection.send(of.ofp_set_config(miss_send_len=MISS_SEND_LEN))
if len(self.switches) == len(self.t.switches()):
log.info("Woo! All switches up")
self.all_switches_up = True
self._get_all_paths()
if self.all_switches_up == True:
self._do_probe()
def _handle_ConnectionUp(self, event):
sw = self.switches.get(event.dpid)
sw_str = dpidToStr(event.dpid)
sw_name = self.t.id_gen(dpid=event.dpid).name_str()
self.macTable.clear() #clear macTable when there is a new conection
if sw_name not in self.t.switches():
log.warn("Ignoring unknown switch %s" % sw_str)
return
if sw is None:
log.info("Added a new switch %s" % sw_name)
sw = Switch()
self.switches[event.dpid] = sw
sw.connect(event.connection)
else:
log.debug("Odd - already saw switch %s come up" % sw_str)
sw.connect(event.connection)
sw.connection.send(of.ofp_set_config(miss_send_len=MISS_SEND_LEN))
if len(self.switches) == len(self.t.switches()):
log.info("All of the switches are up")
if self.mode == 'proactive':
self._install_proactive_flows()
log.info("Routing is complete")
self.all_switches_up = True
def _handle_PacketIn (self, event):
# parsing the input packet
packet = event.parse()
# updating out mac to port mapping
self.macToPort[packet.src] = event.port
if packet.type == packet.LLDP_TYPE or packet.type == 0x86DD:
# Drop LLDP packets
# Drop IPv6 packets
# send of command without actions
msg = of.ofp_packet_out()
msg.buffer_id = event.ofp.buffer_id
msg.in_port = event.port
self.connection.send(msg)
return
if packet.dst not in self.macToPort:
# does not know out port
# flood the packet
log.debug("I am inside the switch %s"% (event.dpid))
log.debug("Port for %s unknown -- flooding switch " % (packet.dst,))
msg = of.ofp_packet_out()
msg.actions.append(of.ofp_action_output(port = of.OFPP_FLOOD))
msg.buffer_id = event.ofp.buffer_id
msg.in_port = event.port
self.connection.send(msg)
#log.debug("Still flooding")
else:
# installing flow
outport = self.macToPort[packet.dst]
if outport == event.port:
log.warning("Same port for packet from %s -> %s on %s. Drop." %
(packet.src, packet.dst, outport), dpidToStr(event.dpid))
return
log.debug("installing flow for %s.%i -> %s.%i" % (packet.src, event.port, packet.dst, outport))
log.debug("this is dpid %s" % dpidToStr(event.dpid))
msg = of.ofp_flow_mod()
msg.match.dl_src = packet.src
msg.match.dl_dst = packet.dst
msg.idle_timeout = IDLE_TIMEOUT
msg.hard_timeout = HARD_TIMEOUT
msg.actions.append(of.ofp_action_output(port = outport))
msg.buffer_id = event.ofp.buffer_id
self.connection.send(msg)
def _handle_flowstats_received(event):
stats = flow_stats_to_list(event.stats) #get event stats
log.debug("Flow stats received from %s:%s",
dpidToStr(event.connection.dpid), stats)
global flow_bytes_past # last recording flow bytes
global max_bytes # max value
global max_addr # max value' address
flow_bytes_now = 0
flow_bytes = 0
flow_bandwidth = 0 # bandwidth
for f in event.stats:
if f.match.dl_dst == EthAddr("00:00:00:00:00:01"):
flow_bytes_now += f.byte_count
if f.byte_count > max_bytes:
max_bytes = f.byte_count
max_addr = f.match.dl_src
flow_bytes = flow_bytes_now - flow_bytes_past
#flow_bandwidth = (flow_bytes*8.0/5.0)/1000000.0
flow_bandwidth = (flow_bytes * 8.0) / 1000000.0
flow_bytes_past = flow_bytes_now
#if there is data to h1
if flow_bandwidth >= 0:
log.info("Traffic to h1 is %s bytes ", flow_bytes)
log.info("Traffic to h1 is %s bandwidth ", flow_bandwidth)
msg = of.ofp_flow_mod() # create message object
msg.match = of.ofp_match()
threshold = 16 # set threshold 16 here
if flow_bandwidth > threshold:
msg.match.dl_src = max_addr
msg.match.dl_dst = EthAddr("00:00:00:00:00:01")
event.connection.send(msg)
#if src address is host 2
if max_addr == EthAddr("00:00:00:00:00:02"):
log.info("Overload: Packets from h2 are dropped")
#if src address is host 3
if max_addr == EthAddr("00:00:00:00:00:03"):
log.info("Overload: Packets from h3 are dropped")
#if src address is host 4
if max_addr == EthAddr("00:00:00:00:00:04"):
log.info("Overload: Packets from h4 are dropped")
else:
msg.match.dl_src = max_addr
#set msg match's address
msg.match.dl_dst = EthAddr("00:00:00:00:00:01")
event.connection.send(msg)
#if src address is host 2
if max_addr == EthAddr("00:00:00:00:00:02"):
log.info("Packets from h2 are forwarded")
#if src address is host 3
if max_addr == EthAddr("00:00:00:00:00:03"):
log.info("Packets from h3 are forwarded")
#if src address is host 4
if max_addr == EthAddr("00:00:00:00:00:04"):
log.info("Packets from h4 are forwarded")
else:
#if not exceed the threshold
log.info("sending packets successfully")
def _expireLinks(self):
'''
Called periodially by a timer to expire links that haven't been
refreshed recently.
'''
curtime = time.time()
deleteme = []
for link, timestamp in self.adjacency.iteritems():
if curtime - timestamp > LINK_TIMEOUT:
deleteme.append(link)
log.info('link timeout: %s.%i -> %s.%i' %
(dpidToStr(link.dpid1), link.port1,
dpidToStr(link.dpid2), link.port2))
if deleteme:
self._deleteLinks(deleteme)
def _handle_ConnectionUp(event):
"""
Be a proactive hub by telling every connected switch to flood all packets
"""
msg = of.ofp_flow_mod()
msg.actions.append(of.ofp_action_output(port=of.OFPP_FLOOD))
event.connection.send(msg)
log.info("Hubifying %s", dpidToStr(event.dpid))
def find_HostPorts ():
#print ports
create_adjacency()
for dpid in dpids:
host_ports[dpid] = []
# print "Host port for",dpidToStr(dpid)
for allp in ports[dpidToStr(dpid)].keys():
if allp == 65534:
continue
flag = False
for corep in switch_adjacency[dpid].keys():
# print "Compare allp",allp," with corep",corep
if allp is corep:
flag = True
if flag is False:
host_ports[dpid].append(allp)
print "Host port for",dpidToStr(dpid)," = ",host_ports[dpid]
def _handle_flowstats_received(event):
stats = flow_stats_to_list(event.stats)
log.debug("FlowStatsReceived from %s: %s",
dpidToStr(event.connection.dpid), stats)
# Get number of bytes/packets in flows for web traffic only
web_bytes = 0
web_flows = 0
web_packet = 0
log.info(event.stats)
for f in event.stats:
if f.match.tp_dst == 80 or f.match.tp_src == 80:
web_bytes += f.byte_count
web_packet += f.packet_count
web_flows += 1
log.info("Web traffic from %s: %s bytes (%s packets) over %s flows",
dpidToStr(event.connection.dpid), web_bytes, web_packet, web_flows)
def _handle_ConnectionUp(self, event):
log.info("Creating port-sec table for DPID %s", dpidToStr(event.dpid))
self.table[event.dpid] = {}
# check all the switch ports and initialize MAC address counter to zero
for port in event.ofp.ports:
log.debug("Init port number: %d, port name: %s" %
(port.port_no, port.name))
self.table[event.dpid][port.port_no] = []