def accept(self):
self.settings.setValue("/Processing/dialogBase", self.saveGeometry())
checkCRS = ProcessingConfig.getSetting(
ProcessingConfig.WARN_UNMATCHING_CRS)
try:
self.setParamValues()
if checkCRS and not self.alg.checkInputCRS():
reply = QMessageBox.question(
self, self.tr("Unmatching CRS's"),
self.tr('Layers do not all use the same CRS. This can '
'cause unexpected results.\nDo you want to '
'continue?'), QMessageBox.Yes | QMessageBox.No,
QMessageBox.No)
if reply == QMessageBox.No:
return
checkExtentCRS = ProcessingConfig.getSetting(
ProcessingConfig.WARN_UNMATCHING_EXTENT_CRS)
if checkExtentCRS and self.checkExtentCRS():
reply = QMessageBox.question(
self, self.tr("Extent CRS"),
self.
tr('Extent parameters must use the same CRS as the input layers.\n'
'Your input layers do not have the same extent as the project, '
'so the extent might be in a wrong CRS if you have selected it from the canvas.\n'
'Do you want to continue?'),
QMessageBox.Yes | QMessageBox.No, QMessageBox.No)
if reply == QMessageBox.No:
return
msg = self.alg._checkParameterValuesBeforeExecuting()
if msg:
QMessageBox.warning(self,
self.tr('Unable to execute algorithm'),
msg)
return
self.btnRun.setEnabled(False)
self.btnClose.setEnabled(False)
buttons = self.mainWidget.iterateButtons
self.iterateParam = None
for i in range(len(list(buttons.values()))):
button = list(buttons.values())[i]
if button.isChecked():
self.iterateParam = list(buttons.keys())[i]
break
self.progressBar.setMaximum(0)
self.lblProgress.setText(self.tr('Processing algorithm...'))
# Make sure the Log tab is visible before executing the algorithm
try:
self.tabWidget.setCurrentIndex(1)
self.repaint()
except:
pass
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
self.setInfo(
self.tr('<b>Algorithm %s starting...</b>') % self.alg.name)
if self.iterateParam:
if runalgIterating(self.alg, self.iterateParam, self.feedback):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
else:
command = self.alg.getAsCommand()
if command:
ProcessingLog.addToLog(ProcessingLog.LOG_ALGORITHM,
command)
if runalg(self.alg, self.feedback):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
except AlgorithmDialogBase.InvalidParameterValue as e:
try:
self.buttonBox.accepted.connect(
lambda e=e: e.widget.setPalette(QPalette()))
palette = e.widget.palette()
palette.setColor(QPalette.Base, QColor(255, 255, 0))
e.widget.setPalette(palette)
except:
pass
self.bar.clearWidgets()
self.bar.pushMessage("",
"Wrong or missing parameter value: %s" %
e.parameter.description,
level=QgsMessageBar.WARNING,
duration=5)
def accept(self):
checkCRS = ProcessingConfig.getSetting(
ProcessingConfig.WARN_UNMATCHING_CRS)
try:
self.setParamValues()
if checkCRS and not self.alg.checkInputCRS():
reply = QMessageBox.question(
self, self.tr("Unmatching CRS's"),
self.tr('Layers do not all use the same CRS. This can '
'cause unexpected results.\nDo you want to '
'continue?'), QMessageBox.Yes | QMessageBox.No,
QMessageBox.No)
if reply == QMessageBox.No:
return
msg = self.alg.checkParameterValuesBeforeExecuting()
if msg:
QMessageBox.warning(self,
self.tr('Unable to execute algorithm'),
msg)
return
self.btnRun.setEnabled(False)
self.btnClose.setEnabled(False)
buttons = self.mainWidget.iterateButtons
self.iterateParam = None
for i in range(len(buttons.values())):
button = buttons.values()[i]
if button.isChecked():
self.iterateParam = buttons.keys()[i]
break
self.progressBar.setMaximum(0)
self.lblProgress.setText(self.tr('Processing algorithm...'))
# Make sure the Log tab is visible before executing the algorithm
try:
self.tabWidget.setCurrentIndex(1)
self.repaint()
except:
pass
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
self.setInfo(
self.tr('<b>Algorithm %s starting...</b>') % self.alg.name)
if self.iterateParam:
if runalgIterating(self.alg, self.iterateParam, self):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
else:
command = self.alg.getAsCommand()
if command:
ProcessingLog.addToLog(ProcessingLog.LOG_ALGORITHM,
command)
if runalg(self.alg, self):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
except AlgorithmDialogBase.InvalidParameterValue, e:
try:
self.buttonBox.accepted.connect(
lambda: e.widget.setPalette(QPalette()))
palette = e.widget.palette()
palette.setColor(QPalette.Base, QColor(255, 255, 0))
e.widget.setPalette(palette)
self.lblProgress.setText(
self.tr('<b>Missing parameter value: %s</b>') %
e.parameter.description)
return
except:
QMessageBox.critical(
self, self.tr('Unable to execute algorithm'),
self.tr('Wrong or missing parameter values'))
def accept(self):
self.settings.setValue("/Processing/dialogBase", self.saveGeometry())
checkCRS = ProcessingConfig.getSetting(ProcessingConfig.WARN_UNMATCHING_CRS)
try:
self.setParamValues()
if checkCRS and not self.alg.checkInputCRS():
reply = QMessageBox.question(self, self.tr("Unmatching CRS's"),
self.tr('Layers do not all use the same CRS. This can '
'cause unexpected results.\nDo you want to '
'continue?'),
QMessageBox.Yes | QMessageBox.No,
QMessageBox.No)
if reply == QMessageBox.No:
return
checkExtentCRS = ProcessingConfig.getSetting(ProcessingConfig.WARN_UNMATCHING_EXTENT_CRS)
if checkExtentCRS and self.checkExtentCRS():
reply = QMessageBox.question(self, self.tr("Extent CRS"),
self.tr('Extent parameters must use the same CRS as the input layers.\n'
'Your input layers do not have the same extent as the project, '
'so the extent might be in a wrong CRS if you have selected it from the canvas.\n'
'Do you want to continue?'),
QMessageBox.Yes | QMessageBox.No,
QMessageBox.No)
if reply == QMessageBox.No:
return
msg = self.alg._checkParameterValuesBeforeExecuting()
if msg:
QMessageBox.warning(
self, self.tr('Unable to execute algorithm'), msg)
return
self.btnRun.setEnabled(False)
self.btnClose.setEnabled(False)
buttons = self.mainWidget.iterateButtons
self.iterateParam = None
for i in range(len(list(buttons.values()))):
button = list(buttons.values())[i]
if button.isChecked():
self.iterateParam = list(buttons.keys())[i]
break
self.progressBar.setMaximum(0)
self.lblProgress.setText(self.tr('Processing algorithm...'))
# Make sure the Log tab is visible before executing the algorithm
try:
self.tabWidget.setCurrentIndex(1)
self.repaint()
except:
pass
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
self.setInfo(
self.tr('<b>Algorithm %s starting...</b>') % self.alg.name)
if self.iterateParam:
if runalgIterating(self.alg, self.iterateParam, self.feedback):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
else:
command = self.alg.getAsCommand()
if command:
ProcessingLog.addToLog(
ProcessingLog.LOG_ALGORITHM, command)
if runalg(self.alg, self.feedback):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
except AlgorithmDialogBase.InvalidParameterValue as e:
try:
self.buttonBox.accepted.connect(lambda e=e:
e.widget.setPalette(QPalette()))
palette = e.widget.palette()
palette.setColor(QPalette.Base, QColor(255, 255, 0))
e.widget.setPalette(palette)
except:
pass
self.bar.clearWidgets()
self.bar.pushMessage("", "Wrong or missing parameter value: %s" % e.parameter.description,
level=QgsMessageBar.WARNING, duration=5)
def accept(self):
checkCRS = ProcessingConfig.getSetting(
ProcessingConfig.WARN_UNMATCHING_CRS)
try:
self.setParamValues()
if checkCRS and not self.alg.checkInputCRS():
reply = QMessageBox.question(self, "Unmatching CRS's",
'Layers do not all use the same CRS.\n'
+ 'This can cause unexpected results.\n'
+ 'Do you want to continue?',
QMessageBox.Yes | QMessageBox.No,
QMessageBox.No)
if reply == QMessageBox.No:
return
msg = self.alg.checkParameterValuesBeforeExecuting()
if msg:
QMessageBox.warning(self, 'Unable to execute algorithm', msg)
return
self.runButton.setEnabled(False)
self.buttonBox.button(
QDialogButtonBox.Close).setEnabled(False)
buttons = self.paramTable.iterateButtons
self.iterateParam = None
for i in range(len(buttons.values())):
button = buttons.values()[i]
if button.isChecked():
self.iterateParam = buttons.keys()[i]
break
self.tabWidget.setCurrentIndex(1) # Log tab
self.progress.setMaximum(0)
self.progressLabel.setText('Processing algorithm...')
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
self.setInfo('<b>Algorithm %s starting...</b>' % self.alg.name)
# make sure the log tab is visible before executing the algorithm
try:
self.repaint()
except:
pass
if self.iterateParam:
if runalgIterating(self.alg,
self.iterateParam, self):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
else:
command = self.alg.getAsCommand()
if command:
ProcessingLog.addToLog(ProcessingLog.LOG_ALGORITHM,
command)
if runalg(self.alg, self):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
except AlgorithmExecutionDialog.InvalidParameterValue, ex:
try:
self.buttonBox.accepted.connect(lambda :
ex.widget.setPalette(QPalette()))
palette = ex.widget.palette()
palette.setColor(QPalette.Base, QColor(255, 255, 0))
ex.widget.setPalette(palette)
self.progressLabel.setText('<b>Missing parameter value: '
+ ex.parameter.description + '</b>')
return
except:
QMessageBox.critical(self, 'Unable to execute algorithm',
'Wrong or missing parameter values')
def accept(self):
self.settings.setValue("/Processing/dialogBase", self.saveGeometry())
checkCRS = ProcessingConfig.getSetting(ProcessingConfig.WARN_UNMATCHING_CRS)
try:
self.setParamValues()
if checkCRS and not self.alg.checkInputCRS():
reply = QMessageBox.question(
self,
self.tr("Unmatching CRS's"),
self.tr(
"Layers do not all use the same CRS. This can "
"cause unexpected results.\nDo you want to "
"continue?"
),
QMessageBox.Yes | QMessageBox.No,
QMessageBox.No,
)
if reply == QMessageBox.No:
return
msg = self.alg._checkParameterValuesBeforeExecuting()
if msg:
QMessageBox.warning(self, self.tr("Unable to execute algorithm"), msg)
return
self.btnRun.setEnabled(False)
self.btnClose.setEnabled(False)
buttons = self.mainWidget.iterateButtons
self.iterateParam = None
for i in range(len(buttons.values())):
button = buttons.values()[i]
if button.isChecked():
self.iterateParam = buttons.keys()[i]
break
self.progressBar.setMaximum(0)
self.lblProgress.setText(self.tr("Processing algorithm..."))
# Make sure the Log tab is visible before executing the algorithm
try:
self.tabWidget.setCurrentIndex(1)
self.repaint()
except:
pass
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
self.setInfo(self.tr("<b>Algorithm %s starting...</b>") % self.alg.name)
if self.iterateParam:
if runalgIterating(self.alg, self.iterateParam, self):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
else:
command = self.alg.getAsCommand()
if command:
ProcessingLog.addToLog(ProcessingLog.LOG_ALGORITHM, command)
if runalg(self.alg, self):
self.finish()
else:
QApplication.restoreOverrideCursor()
self.resetGUI()
except AlgorithmDialogBase.InvalidParameterValue as e:
try:
self.buttonBox.accepted.connect(lambda: e.widget.setPalette(QPalette()))
palette = e.widget.palette()
palette.setColor(QPalette.Base, QColor(255, 255, 0))
e.widget.setPalette(palette)
self.lblProgress.setText(self.tr("<b>Missing parameter value: %s</b>") % e.parameter.description)
return
except:
QMessageBox.critical(
self, self.tr("Unable to execute algorithm"), self.tr("Wrong or missing parameter values")
)
