def test_sensors_temperatures_against_sysctl(self):
num_cpus = psutil.cpu_count(True)
for cpu in range(num_cpus):
sensor = "dev.cpu.%s.temperature" % cpu
# sysctl returns a string in the format 46.0C
sysctl_result = int(float(sysctl(sensor)[:-1]))
self.assertAlmostEqual(
psutil.sensors_temperatures()["coretemp"][cpu].current,
sysctl_result, delta=10)
sensor = "dev.cpu.%s.coretemp.tjmax" % cpu
sysctl_result = int(float(sysctl(sensor)[:-1]))
self.assertEqual(
psutil.sensors_temperatures()["coretemp"][cpu].high,
sysctl_result)
def __init__(self):
"""Init sensors stats."""
# Temperatures
self.init_temp = False
self.stemps = {}
try:
# psutil>=5.1.0, Linux-only
self.stemps = psutil.sensors_temperatures()
except AttributeError:
logger.debug("Cannot grab temperatures. Platform not supported.")
else:
self.init_temp = True
# Solve an issue #1203 concerning a RunTimeError warning message displayed
# in the curses interface.
warnings.filterwarnings("ignore")
# Fans
self.init_fan = False
self.sfans = {}
try:
# psutil>=5.2.0, Linux-only
self.sfans = psutil.sensors_fans()
except AttributeError:
logger.debug("Cannot grab fans speed. Platform not supported.")
else:
self.init_fan = True
# !!! Disable Fan: High CPU consumption with psutil 5.2.0 or higher
# Delete the two followings lines when corrected (https://github.com/giampaolo/psutil/issues/1199)
self.init_fan = False
logger.debug("Fan speed sensors disable (see https://github.com/giampaolo/psutil/issues/1199)")
# Init the stats
self.reset()
def __init__(self):
"""Init sensors stats."""
# Temperatures
self.init_temp = False
self.stemps = {}
try:
# psutil>=5.1.0 is required
self.stemps = psutil.sensors_temperatures()
except AttributeError:
logger.warning("PsUtil 5.1.0 or higher is needed to grab temperatures sensors")
except OSError as e:
# FreeBSD: If oid 'hw.acpi.battery' not present, Glances wont start #1055
logger.error("Can not grab temperatures sensors ({})".format(e))
else:
self.init_temp = True
# Fans
self.init_fan = False
self.sfans = {}
try:
# psutil>=5.2.0 is required
self.sfans = psutil.sensors_fans()
except AttributeError:
logger.warning("PsUtil 5.2.0 or higher is needed to grab fans sensors")
except OSError as e:
logger.error("Can not grab fans sensors ({})".format(e))
else:
self.init_fan = True
# !!! Disable Fan: High CPU consumption is PSUtil 5.2.0
# Delete the following line when corrected
self.init_fan = False
# Init the stats
self.reset()
def build_sensors_list(self, type):
"""Build the sensors list depending of the type.
type: SENSOR_TEMP_UNIT or SENSOR_FAN_UNIT
output: a list"""
ret = []
if type == SENSOR_TEMP_UNIT and self.init_temp:
input_list = self.stemps
self.stemps = psutil.sensors_temperatures()
elif type == SENSOR_FAN_UNIT and self.init_fan:
input_list = self.sfans
self.sfans = psutil.sensors_fans()
else:
return ret
for chipname, chip in iteritems(input_list):
i = 1
for feature in chip:
sensors_current = {}
# Sensor name
if feature.label == '':
sensors_current['label'] = chipname + ' ' + str(i)
else:
sensors_current['label'] = feature.label
# Fan speed and unit
sensors_current['value'] = int(feature.current)
sensors_current['unit'] = type
# Add sensor to the list
ret.append(sensors_current)
i += 1
return ret
def test_sensors_temperatures_fahreneit(self):
d = {'coretemp': [('label', 50.0, 60.0, 70.0)]}
with mock.patch("psutil._psplatform.sensors_temperatures",
return_value=d) as m:
temps = psutil.sensors_temperatures(
fahrenheit=True)['coretemp'][0]
assert m.called
self.assertEqual(temps.current, 122.0)
self.assertEqual(temps.high, 140.0)
self.assertEqual(temps.critical, 158.0)
def test_sensors_temperatures(self):
temps = psutil.sensors_temperatures()
for name, entries in temps.items():
self.assertIsInstance(name, str)
for entry in entries:
self.assertIsInstance(entry.label, str)
if entry.current is not None:
self.assertGreaterEqual(entry.current, 0)
if entry.high is not None:
self.assertGreaterEqual(entry.high, 0)
if entry.critical is not None:
self.assertGreaterEqual(entry.critical, 0)
def main():
if not hasattr(psutil, "sensors_temperatures"):
sys.exit("platform not supported")
temps = psutil.sensors_temperatures()
if not temps:
sys.exit("can't read any temperature")
for name, entries in temps.items():
print(name)
for entry in entries:
print(" %-20s %s °C (high = %s °C, critical = %s °C)" % (
entry.label or name, entry.current, entry.high,
entry.critical))
print()
def main():
if hasattr(psutil, "sensors_temperatures"):
temps = psutil.sensors_temperatures()
else:
temps = {}
if hasattr(psutil, "sensors_fans"):
fans = psutil.sensors_fans()
else:
fans = {}
if hasattr(psutil, "sensors_battery"):
battery = psutil.sensors_battery()
else:
battery = None
if not any((temps, fans, battery)):
print("can't read any temperature, fans or battery info")
return
names = set(list(temps.keys()) + list(fans.keys()))
for name in names:
print(name)
# Temperatures.
if name in temps:
print(" Temperatures:")
for entry in temps[name]:
print(" %-20s %s°C (high=%s°C, critical=%s°C)" % (
entry.label or name, entry.current, entry.high,
entry.critical))
# Fans.
if name in fans:
print(" Fans:")
for entry in fans[name]:
print(" %-20s %s RPM" % (
entry.label or name, entry.current))
# Battery.
if battery:
print("Battery:")
print(" charge: %s%%" % round(battery.percent, 2))
if battery.power_plugged:
print(" status: %s" % (
"charging" if battery.percent < 100 else "fully charged"))
print(" plugged in: yes")
else:
print(" left: %s" % secs2hours(battery.secsleft))
print(" status: %s" % "discharging")
print(" plugged in: no")
def fetch_temps():
temps = []
sensors = psutil.sensors_temperatures()
for thing in sensors:
for piece in sensors[thing]:
tcurrent = piece.current
tmax = piece.high
tcrit = piece.critical
if not tcurrent or (not tmax and not tcrit):
continue
if not tmax:
tmax = tcrit
elif not tcrit:
tcrit = tmax
temps.append((thing, tcurrent, tmax, tcrit))
print(temps)
return temps
def getStatusBytes():
global statusCacheTime, statusCache
if time.time()< (statusCacheTime+10):
return statusCache
statusCacheTime = time.time()
bstat = 0
nstat = 255
temp = 0
try:
import psutil
battery = psutil.sensors_battery()
bstat = int((battery.percent/100)*63)
if battery.power_plugged:
bstat +=128
else:
bstat+=0
temp = 0
x = psutil.sensors_temperatures()
for i in x:
for j in x[i]:
if temp< j.current:
temp = j.current
except:
print(traceback.format_exc())
#Linux only
#TODO: This assumes that if there's wifi,
#That's what's being used, otherwise we get unknown.
#This inaccurate data is better than nothing I think.
try:
##This reports WiFi signal level on
p = subprocess.check_output("iwconfig", stderr=os.devnull)
sig = int(re.search(b"Signal level=(.*?)dBm",p).group(1).decode("utf8"))
sig=min(sig, -20)
sig=max(sig,-120)
nstat= sig+120
except:
pass
statusCache = struct.pack("<BBb",int(bstat),nstat, max(min(int(temp), 127), -127))
return statusCache
def test_temperatures(self):
if hasattr(psutil, "sensors_temperatures") and \
psutil.sensors_temperatures():
self.assert_stdout('temperatures.py')
else:
self.assert_syntax('temperatures.py')
def update(self):
temps = psutil.sensors_temperatures()
if self.unit_name in temps:
self._temp = next(filter(lambda s: s.label==self.sub_label, temps[self.unit_name]), None).current
def update(self):
self.temp = psutil.sensors_temperatures()
self.set_temperatures()
def get_value(self):
return psutil.sensors_temperatures()
def render(self) -> List[Block]:
sensors: Dict[str, List[Any]] = psutil.sensors_temperatures()
sensor = sensors['coretemp'][0]
i, c = self.get_icon, self.get_color_key
text = f'{sensor.current:.0f}°C'
return self.simple_blocks(icon=i(sensor), text=text, color_key=c(sensor))
def hardWare():
"""返回当前主机硬件信息"""
try:
monitor = {
"ret": 0,
"cpu_info": {},
"memory": {},
"disk": {},
"network": {}
}
monitor["cpu_info"]["percent"] = psutil.cpu_percent(percpu=False)
monitor["memory"]["total"] = psutil.virtual_memory()[0]
monitor["memory"]["used"] = psutil.virtual_memory()[3]
monitor["memory"]["available"] = psutil.virtual_memory()[1]
monitor["memory"]["percent"] = psutil.virtual_memory()[2]
monitor["disk"]["total"] = psutil.disk_usage("/")[0]
monitor["disk"]["used"] = psutil.disk_usage("/")[1]
monitor["disk"]["available"] = psutil.disk_usage("/")[2]
monitor["disk"]["percent"] = psutil.disk_usage("/")[3]
monitor["disk"]["read_conut"] = psutil.disk_io_counters()[0]
monitor["disk"]["write_conut"] = psutil.disk_io_counters()[1]
monitor["disk"]["read_bytes"] = psutil.disk_io_counters()[2]
monitor["disk"]["write_bytes"] = psutil.disk_io_counters()[3]
monitor["disk"]["read_time"] = psutil.disk_io_counters()[4]
monitor["disk"]["write_time"] = psutil.disk_io_counters()[5]
monitor["disk"]["busy_time"] = psutil.disk_io_counters()[8]
monitor["network"]["bytes_sent"] = psutil.net_io_counters()[0]
monitor["network"]["bytes_recv"] = psutil.net_io_counters()[1]
monitor["network"]["packets_sent"] = psutil.net_io_counters()[2]
monitor["network"]["packets_recv"] = psutil.net_io_counters()[3]
monitor["network"]["errin"] = psutil.net_io_counters()[4]
monitor["network"]["errout"] = psutil.net_io_counters()[5]
monitor["cpu_info"]["temperature"] = psutil.sensors_temperatures(
)["cpu-thermal"][0][1]
monitor["boot_time"] = time.strftime(
"%Y-%m-%d %X", time.localtime(psutil.boot_time()))
monitor["users"] = len(psutil.users())
monitor["pids"] = len(psutil.pids())
while True:
result = instance.read()
temperature = result.temperature
humidity = result.humidity
if temperature != 0 and humidity != 0:
break
monitor["temperature"] = temperature
monitor["humidity"] = humidity
temperature_humidity_list = []
if mongoFindOne(temperature_humidity_key):
temperature_humidity_list = mongoFindOne(
temperature_humidity_key)["val"][-9:]
t_h_time_list = []
t_list = []
h_list = []
for msg in temperature_humidity_list:
a = msg["time"]
# print a
# print time.strftime('%H',time.localtime(a))
t_h_time_list.append(
time.strftime('%H', time.localtime(msg["time"])))
t_list.append(msg["temperature"])
h_list.append(msg["humidity"])
# print t_h_time_list
monitor["t_h_time_list"] = t_h_time_list
monitor["t_list"] = t_list
monitor["h_list"] = h_list
except:
monitor = {"ret": 1001, "err": "[Hardware]Get Monitor Status Failed"}
finally:
monitor["time"] = int(time.time())
# print monitor
# print '--------------------------------------------------'
return monitor
def computerInformation():
try:
print "System CPU times", 30 * "-", "\n"
print psutil.cpu_times()
except:
print ""
try:
print "Number of logical CPUs in the system", 30 * "-", "\n"
print psutil.cpu_count()
except:
print ""
try:
print "Number of usable CPUs", 30 * "-", "\n"
print len(psutil.Process().cpu_affinity())
except:
print ""
try:
print "CPU statistics", 30 * "-", "\n"
print psutil.cpu_stats()
except:
print ""
try:
print "CPU frequency", 30 * "-", "\n"
print psutil.cpu_freq()
except:
print ""
try:
print "Statistics about system memory", 30 * "-", "\n"
print psutil.virtual_memory()
except:
print ""
try:
print "System swap memory statistics", 30 * "-", "\n"
print psutil.swap_memory()
except:
print ""
try:
print "Mounted disk partitions", 30 * "-", "\n"
print psutil.disk_partitions()
except:
print ""
try:
print "Disk usage statistics", 30 * "-", "\n"
print psutil.disk_usage('/')
except:
print ""
try:
print "System-wide disk I/O statistics", 30 * "-", "\n"
print psutil.disk_io_counters()
except:
print ""
try:
print "System-wide network I/O statistics", 30 * "-", "\n"
print psutil.net_io_counters()
except:
print ""
try:
print "System-wide socket connections", 30 * "-", "\n"
print psutil.net_connections()
except:
print ""
try:
print "The addresses associated to each NIC", 30 * "-", "\n"
print psutil.net_if_addrs()
except:
print ""
try:
print "Information about each NIC", 30 * "-", "\n"
print psutil.net_if_stats()
except:
print ""
try:
print "Hardware temperatures", 30 * "-", "\n"
print psutil.sensors_temperatures()
except:
print ""
try:
print "Hardware fans speed", 30 * "-", "\n"
print psutil.sensors_fans()
except:
print ""
try:
print "Battery status information", 30 * "-", "\n"
battery = psutil.sensors_battery()
print battery
print("charge = %s%%, time left = %s" %
(battery.percent, secs2hours(battery.secsleft)))
except:
print ""
try:
print "System boot time", 30 * "-", "\n"
print psutil.boot_time()
except:
print ""
try:
print "Users currently connected on the system", 30 * "-", "\n"
print psutil.users()
except:
print ""
try:
print "Current running PIDs", 30 * "-", "\n"
print psutil.pids()
except:
print ""
def main():
fahrenheit = False
names = False
testing = False
time_start = None
components = "gStfM"
separator = " "
home = os.getenv("HOME")
draw_icons = False
pcpu, avg, speed, freqs, temp, fans, b_time, memory, swap, disks_usage, which, ul, dl, xfer_start, xfer_finish, \
path_to_icon, glyph, c_name= None, None, None, None, None, None, None, None, None, None, None, None, None, None, \
None, None, None, None
for i in range(1, len(sys.argv)):
if sys.argv[i] == "-h" or sys.argv[i] == "--help":
print_help()
exit(0)
if sys.argv[i] == "-F":
fahrenheit = True
if sys.argv[i] == "-N":
names = True
if sys.argv[i] == "-T":
testing = True
if sys.argv[i].startswith("-C"):
components = sys.argv[i][2::]
if sys.argv[i].startswith("-S"):
try:
# if number given
spacing = int(sys.argv[i][2::])
separator = " " * spacing
except ValueError:
# string given
separator = sys.argv[i][2::]
if sys.argv[i].startswith("-W"):
try:
which = int(sys.argv[i][2::])
except ValueError:
pass
if sys.argv[i].upper() == "-ALL":
components = "gpaQStfMcWDUk"
names = True
testing = True
if sys.argv[i].startswith("-I"):
draw_icons = True
# We can only have one icon per executor, so let's strip components to the first one
components = sys.argv[i][2]
# exception for UL/DL speed; to assign an icon to it we need to calculate speeds first
if components != "k":
path_to_icon = icon_path(home, components)
if sys.argv[i].startswith("-M"):
# We can only have a custom name for a single component
components = components[0]
names = True
c_name = sys.argv[i][2::]
if testing:
time_start = int(round(time.time() * 1000))
output = ""
# Prepare ONLY requested data, ONLY once
if "g" or "p" in components:
try:
pcpu = psutil.cpu_percent(interval=1, percpu=True)
except:
pass
if "a" in components:
try:
avg = str(psutil.cpu_percent(interval=1))
if len(avg) < 4:
avg = " " + avg
except:
pass
if "s" or "S" in components:
try:
speed = psutil.cpu_freq(False)
except:
pass
if "q" or "Q" in components:
try:
freqs = psutil.cpu_freq(True)
if len(freqs) == 0:
freqs = None
except:
pass
if "t" in components:
try:
temp = psutil.sensors_temperatures(fahrenheit)
except:
pass
if "f" in components:
try:
fans = psutil.sensors_fans()
except:
pass
if "m" or "M" or "z" or "Z" in components:
try:
memory = psutil.virtual_memory()
except:
pass
if "w" or "W" or "x" in components:
try:
swap = psutil.swap_memory()
except:
pass
if "k" in components:
try:
xfer_start = psutil.net_io_counters()
time.sleep(1)
xfer_finish = psutil.net_io_counters()
ul = (xfer_finish[0] - xfer_start[0]) / 1024
dl = (xfer_finish[1] - xfer_start[1]) / 1024
# We've not selected an icon previously. Now we have enough data.
if draw_icons:
path_to_icon = net_icon(home, ul, dl)
else:
glyph = net_glyph(home, ul, dl)
except:
pass
drives = []
# Find drive names, mountpoints
if "d" or "D" or "n" or "N" in components:
try:
d = psutil.disk_partitions()
# This will store name, mountpoint
for entry in d:
n = entry[0].split("/")
name = n[len(n) - 1]
# name, mountpoint
drive = name, entry[1]
drives.append(drive)
except:
pass
if "d" or "D" in components:
try:
disks_usage = []
for drive in drives:
# Search drives by path
data = psutil.disk_usage(drive[1])
# Store name, used, total, percent
essential = drive[0].upper(), data[1], data[0], data[3]
disks_usage.append(essential)
except:
pass
if "n" in components or "N" in components:
try:
disks_usage = []
for drive in drives:
# Search drives by path
data = psutil.disk_usage(drive[1])
# Store mountpoint, used, total, percent
essential = drive[1], data[1], data[0], data[3]
disks_usage.append(essential)
except:
pass
if "u" or "U" in components:
try:
b_time = psutil.boot_time()
except:
pass
# Build output component after component
output += separator
for char in components:
if char == "g" and pcpu is not None:
if c_name:
output += c_name
output += graph_per_cpu(pcpu) + separator
if char == "p" and pcpu is not None:
if names:
output += c_name if c_name else "CPU: "
output += per_cpu(pcpu) + separator
if char == "a" and avg is not None:
if names:
output += c_name if c_name else ""
output += avg + "%" + separator
if char == "q" and freqs is not None:
if names:
output += c_name if c_name else ""
output += freq_per_cpu(freqs)[0][:-1] + "GHz" + separator
if char == "Q" and freqs is not None:
if names:
output += c_name if c_name else ""
result = freq_per_cpu(freqs)
output += result[0][:-1] + "/" + str(result[1]) + "GHz" + separator
if char == "s" and speed is not None:
if names:
output += c_name if c_name else ""
output += str(round(speed[0] / 1000, 1)) + "GHz" + separator
if char == "S" and speed is not None:
if names:
output += c_name if c_name else ""
output += str(round(speed[0] / 1000, 1)) + "/" + str(
round(speed[2] / 1000, 1)) + "GHz" + separator
if char == "t" and temp is not None and len(temp) > 0:
if names:
output += c_name if c_name else ""
output += str(temp["coretemp"][0][1]).split(".")[0]
output += "℉" if fahrenheit else "℃"
output += separator
if char == "f" and fans is not None and len(fans) > 0:
if names:
output += c_name if c_name else " "
fan0 = next(iter(fans.values()))
output += str(fan0[0][1]) + "/m" + separator
if char == 'm' and memory is not None:
if names:
output += c_name if c_name else " "
output += str(round(
(memory[0] - memory[1]) / 1073741824, 1)) + "GB" + separator
if char == 'M' and memory is not None:
if names:
output += c_name if c_name else " "
output += str(round((memory[3]) / 1073741824, 1)) + "/" + str(
round(memory[0] / 1073741824, 1)) + "GB" + separator
if char == 'c' and memory is not None:
if names:
output += c_name if c_name else " "
output += str(memory[2]) + "%" + separator
if char == 'C' and memory is not None:
if names:
output += c_name if c_name else " "
output += str(100 - memory[2]) + "%" + separator
if char == 'u' and b_time is not None:
up_time = int(time.time()) - b_time
m, s = divmod(up_time, 60)
h, m = divmod(m, 60)
if names:
output += c_name if c_name else " "
output += "%d:%02d" % (h, m) + separator
if char == 'U' and b_time is not None:
up_time = int(time.time()) - b_time
m, s = divmod(up_time, 60)
h, m = divmod(m, 60)
if names:
output += c_name if c_name else " "
output += "%d:%02d:%02d" % (h, m, s) + separator
if char == "w" and swap is not None:
if names:
output += c_name if c_name else "SWAP: "
output += str(round(swap[1] / 1073741824, 1)) + "GB" + separator
if char == "W" and swap is not None:
if names:
output += c_name if c_name else "SWAP: "
output += str(round(swap[1] / 1073741824, 1)) + "/"
output += str(round(swap[0] / 1073741824, 1)) + "GB" + separator
if char == "x" and swap is not None:
if names:
output += c_name if c_name else "SWAP: "
output += str(swap[3]) + "%" + separator
if char == "d" or char == "n" and disks_usage is not None:
if which is not None:
try:
entry = disks_usage[which]
output += entry[0] + ": "
output += str(entry[3]) + "%" + separator
except IndexError:
pass
else:
for entry in disks_usage:
output += entry[0] + ": "
output += str(entry[3]) + "%" + separator
if char == "D" or char == "N" and disks_usage is not None:
if c_name:
output += c_name
if which is not None:
try:
entry = disks_usage[which]
output += entry[0] + ":"
output += str(round(entry[1] / 1073741824, 1)) + "/"
output += str(round(entry[2] / 1073741824,
1)) + "GB" + separator
except IndexError:
pass
else:
for entry in disks_usage:
output += entry[0] + ":"
output += str(round(entry[1] / 1073741824, 1)) + "/"
output += str(round(entry[2] / 1073741824,
1)) + "GB" + separator
if char == "k":
if names and xfer_start is not None and xfer_finish is not None:
output += c_name if c_name else glyph
output += '%08.2f' % (
(xfer_finish[0] - xfer_start[0]) / 1024) + '/' + '%08.2f' % (
(xfer_finish[1] - xfer_start[1]) /
1024) + ' kB/s' + separator
if testing:
output += "[" + str(
int((round(time.time() * 1000)) - time_start) /
1000) + "s]" + separator
# remove leading and trailing separator
l = len(separator)
if l > 0:
output = output[l:-l]
if draw_icons:
print(path_to_icon)
print(output)
import time
import serial
import psutil
ser = serial.Serial('/dev/ttyACM0')
ser.baudrate = 9600
ser.flushInput()
cpu = 0
ram = 0
temp = 0
while (1):
cpu = psutil.cpu_percent()
ram = psutil.virtual_memory().percent
temp = psutil.sensors_temperatures()["acpitz"][0][1]
string_to_send = str(int(cpu)) + "," + str(int(ram)) + "," + str(
int(temp)) + "\n"
print(string_to_send)
ser.write(bytes(string_to_send, encoding='utf8'))
time.sleep(3)
# CPU percentage per cpu
try:
cpu_percent = psutil.cpu_percent(interval=None, percpu=True)
except:
cpu_percent = "\033[1mNO DATA RECEIVED\033[0m"
# CPU frequency
try:
cpu_frequency = psutil.cpu_freq()
except:
cpu_frequency = "\033[1mNO DATA RECEIVED\033[0m"
# CPU temperarature
try:
cpu_temp = psutil.sensors_temperatures()
except:
cpu_temp = "\033[1mNO DATA RECEIVED\033[0m"
# MEMORY information
try:
memory = psutil.virtual_memory()
except:
memory = "\033[1mNO DATA RECEIVED\033[0m"
# CPU fan
try:
cpu_fan = psutil.sensors_fans()
except:
cpu_fan = "\033[1mNO DATA RECEIVED\033[0m"
def getCPUTemp():
return str(psutil.sensors_temperatures()['cpu-thermal'][0][1])
def temp():
return jsonify({'sensors_temperatures':psutil.sensors_temperatures(fahrenheit=False)})
#DATA E HORA
data_e_hora_atuais = datetime.now()
fuso_horario = timezone('America/Sao_Paulo')
data_e_hora_sao_paulo = data_e_hora_atuais.astimezone(fuso_horario)
data = data_e_hora_sao_paulo.strftime('%Y-%m-%d')
hora = data_e_hora_sao_paulo.strftime('%H:%M:%S')
#RETORNA UM FLOAT QUE REPRESENTA A UTILIZAÇÃO ATUAL DA CPU DE TODO O SISTEMA COMO UMA PORCENTAGEM
cpu_percent = psutil.cpu_percent(interval=0.1, percpu=False)
#RETORNA A FREQUÊNCIA DA CPU, INCLUINDO A FREQUÊNCIA ATUAL EXPRESSA EM MHZ
cpu_mhz = psutil.cpu_freq(percpu=False)[0]
#RETORNA A TEMPERATURA MAIS ALTA ENTRE OS NÚCLEOS DA CPU
temps = psutil.sensors_temperatures(fahrenheit=False)
name = list(temps.keys())
cpu_temp = temps[name[0]][0][1]
#RETORNA ESTATÍSTICAS SOBRE O USO DE MEMÓRIA DO SISTEMA, INCLUINDO O CAMPO PERCENTUAL
memory_percent = psutil.virtual_memory()[2]
#RETORNA ESTATÍSTICAS DE USO DE DISCO INCLUINDO A PORCENTAGEM DE USO
disk_percent = psutil.disk_usage('/')[3]
#RETORNA AS INFORMAÇÕES DE STATUS DA BATERIA, INCLUINDO A PORCENTAGEM
battery_percent = psutil.sensors_battery()[0]
#EXECUÇÃO DAS CONSULTAS SQL EM PYTHON
sql_zero = "INSERT INTO datahora (data, hora) VALUES (%s, %s)"
sql_datahora = (data, hora)
def main():
t0 = time.time()
# Initialize empty list of frames for simple_motion_detector
last_frames = []
# HOG face detector
hog = dlib.get_frontal_face_detector()
# Load gender model
genderNet, MODEL_MEAN_VALUES, genderList = load_gender_model()
# Key parameters
(i_frame, see, date, small_frame_w, h_line_1, h_line_2, n_last_frames,
delta_threshold, dilate_iterations, min_stripe_area, padding,
face_padding, hog_threshold, temp_threshold) = key_params()
# Counters: one for the case where a frame has more than one face, the
# other for counting how many times the computer has slept to avoid
# overheating
face_in_frame, rests = 1, 0
# Load random forest classifier (get rid of wheel detections)
forest = load_forest()
# Create directory for frames
if not (os.path.isdir(cwd + 'frames_cnn_hog/' + date) or see):
os.mkdir(cwd + 'frames_cnn_hog/' + date)
# Create faces DataFrame and encodings array
df_faces = pd.DataFrame(columns=[
'date', 'frame', 'face_in_frame', 'h_face', 'RGB', 'score',
'face_type', 'gender', 'gender_conf'
])
encodings = np.zeros((0, 128))
# Get video capture of "video_[date].avi" (verbosely)
n_frame, total_frames, cap = get_video_capture(date, i_frame)
while True:
# Set frontal face boolean as False and face_in_frame as 1
frontal_face = False
face_in_frame = 1
n_frame = int(cap.get(cv2.CAP_PROP_POS_FRAMES) + 1)
# Read frame
ret, frame = cap.read()
# Break if not correctly read
if not ret:
break
small_frame = imutils.resize(frame, width=small_frame_w)
r = frame.shape[1] / small_frame.shape[1]
fgmask, last_frames = simple_motion_detector(
small_frame.copy(), n_frame, i_frame, n_last_frames, last_frames,
delta_threshold, dilate_iterations)
mov = check_stripe_movement(fgmask, min_stripe_area, h_line_1,
h_line_2)
if mov:
# print('PROCESSING')
rgb_frame = cv2.cvtColor(frame, cv2.COLOR_BGR2RGB)
rgb_small_frame = cv2.cvtColor(small_frame, cv2.COLOR_BGR2RGB)
face_locations = face_recognition.face_locations(rgb_small_frame,
model="cnn")
big_face_locations = [
tuple([int(r * x) for x in face]) for face in face_locations
]
face_encodings = face_recognition.face_encodings(
rgb_frame, big_face_locations)
for face_location, big_face_location, face_encoding in zip(
face_locations, big_face_locations, face_encodings):
# print("FACE")
top, right, bottom, left = face_location
big_top, big_right, big_bottom, big_left = big_face_location
rgb = rgb_frame[big_top:big_bottom,
big_left:big_right, :].mean(axis=0).mean(
axis=0)
forest_pred = get_forest_pred(forest, rgb)
h_face = big_bottom - big_top
hog_fl, scores, idx = hog_face_loc(rgb_small_frame, top, right,
bottom, left, padding, hog,
hog_threshold)
if len(hog_fl) and forest_pred:
# print('FRONTAL')
gender, gender_conf = predict_gender(
frame, big_top, big_right, big_bottom, big_left,
face_padding, MODEL_MEAN_VALUES, genderNet, genderList)
draw_face_small_frame(small_frame, face_in_frame, gender,
top, right, bottom, left, padding)
df_faces = df_faces.append(
{
'date': date,
'frame': n_frame,
'face_in_frame': face_in_frame,
'h_face': h_face,
'RGB': rgb,
'score': scores[0],
'face_type': idx[0],
'gender': gender,
'gender_conf': gender_conf
},
ignore_index=True)
encodings = np.concatenate(
(encodings, face_encoding.reshape((1, 128))))
frontal_face = True
face_in_frame += 1
if frontal_face and not see:
cv2.imwrite(
cwd + 'frames_cnn_hog/' + date + '/' + str(n_frame) + '.jpg',
small_frame)
if see:
key = draw_and_show(small_frame, fgmask, h_line_1, h_line_2)
if key == ord('q'):
break
if ((n_frame % 10000) == 0) and not see:
df_faces.to_csv(cwd + 'CSVs_cnn_hog/' + date + '_' + str(i_frame) +
'.csv')
np.save((cwd + 'encodings_cnn_hog/' + date + '_' + str(i_frame) +
'.npy'), encodings)
# print('-----------CSV and encodings saved------------')
if (psutil.sensors_temperatures()['coretemp'][0].current >
temp_threshold):
# print('resting...')
while (psutil.sensors_temperatures()['coretemp'][0].current > 68):
time.sleep(1)
rests += 1
if not see:
np.save(
(cwd + 'encodings_cnn_hog/' + date + '_' + str(i_frame) + '.npy'),
encodings)
df_faces.to_csv(cwd + 'CSVs_cnn_hog/' + date + '_' + str(i_frame) +
'.csv')
print('CSV and encodings saved')
cap.release()
if see:
cv2.destroyAllWindows()
print('Processed', n_frame, 'of', total_frames, 'frames')
print('Faces data shapes:', df_faces.shape, encodings.shape)
print('Total time:', round((time.time() - t0) / 3600, 2), 'hours')
print('Rested ' + str(rests) + ' times')
print('Done processing', date)
cluster_1_door.main(date)
#!/usr/bin/python3.6
import json
import psutil
import os
import re
data = {'cpu': {}}
data['cpu']['count'] = psutil.cpu_count(logical=False)
data['cpu']['countLogial'] = psutil.cpu_count(logical=True)
temperatures = psutil.sensors_temperatures()
if 'coretemp' in temperatures:
temperatures = psutil.sensors_temperatures()['coretemp']
data['cpu']['temperature'] = {'data': {}, 'high': temperatures[0].high, 'critical': temperatures[0].critical}
for (key,val) in enumerate(temperatures):
data['cpu']['temperature']['data'][key] = val.current
data['cpu']['times'] = {}
timesOutput = re.sub(r'([0-1]?[0-9]|2[0-3]):[0-5][0-9]:[0-5][0-9]\s*(PM|AM)*\s*', '', os.popen('mpstat -P ALL').read())
timesOutput = re.sub(r'[%]', '', timesOutput)
timesOutput = re.sub(r'[ ]+', ' ', timesOutput).split('\n')
del timesOutput[:2]
timesOutput.pop()
for i, val in enumerate(timesOutput):
timesOutput[i] = timesOutput[i].split(' ')
data['cpu']['times']['header'] = timesOutput[0]
data['cpu']['times']['data'] = {}
async def property_update(device_client, os_type, machine):
print("[DEBUG] Update System Message")
# get IP Address
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.connect(("8.8.8.8", 80))
ipLocal = s.getsockname()[0]
s.close()
ipPublic = requests.get('http://ifconfig.me/ip', timeout=1).text.strip()
#
global root_path
if os_type == "Windows":
root_path = 'C:/'
hostname_str = platform.node()
cpuInfo = ' '.join(
os.popen('wmic cpu get name').read().splitlines()[2].split())
cpuCores = psutil.cpu_count()
biosManufacturer = ' '.join(
os.popen('wmic bios get Manufacturer').read().splitlines()
[2].split())
biosVersion = ''.join(
os.popen('wmic bios get Version').read().splitlines()[2].split())
baseboardManufacturer = ''.join(
os.popen('wmic baseboard get Manufacturer').read().splitlines()
[2].split())
baseboardSerialNumber = ''.join(
os.popen('wmic baseboard get SerialNumber').read().splitlines()
[2].split())
baseboardProduct = ''.join(
os.popen('wmic baseboard get Product').read().splitlines()
[2].split())
osVersion = ''.join(
os.popen('wmic os get Version').read().splitlines()[2].split())
osBuildNumber = ''.join(
os.popen('wmic os get BuildNumber').read().splitlines()[2].split())
elif os_type == "Linux":
root_path = '/'
hostname_str = platform.node()
osVersion = ' '.join(
os.popen('hostnamectl |grep "Operating System"').read().split(':')
[1].split())
osBuildNumber = ' '.join(
os.popen('hostnamectl |grep "Kernel"').read().split(':')
[1].split())
if "x86" in machine:
cpuInfo = ' '.join(
os.popen('lscpu |grep "Model name"').read().split(':')
[1].split())
biosManufacturer = ' '.join(
os.popen('cat /sys/class/dmi/id/bios_vendor').read().split())
biosVersion = ' '.join(
os.popen('cat /sys/class/dmi/id/bios_version').read().split())
baseboardManufacturer = ' '.join(
os.popen('cat /sys/class/dmi/id/board_vendor').read().split())
baseboardSerialNumber = ' '.join(
os.popen(
'sudo cat /sys/class/dmi/id/board_serial').read().split())
baseboardProduct = ' '.join(
os.popen('cat /sys/class/dmi/id/board_name').read().split())
# Linux Only
highTemp = psutil.sensors_temperatures()['coretemp'][0][2]
criticalTemp = psutil.sensors_temperatures()['coretemp'][0][3]
else:
biosManufacturer = 'N/A'
biosVersion = 'N/A'
baseboardManufacturer = 'N/A'
baseboardSerialNumber = 'N/A'
baseboardProduct = 'N/A'
try:
cpuInfo = ' '.join(
os.popen('lscpu |grep "Model name"').read().split(':')
[1].split())
except:
cpuInfo = machine
try:
highTemp = psutil.sensors_temperatures()['soc-thermal'][0][2]
criticalTemp = psutil.sensors_temperatures(
)['soc-thermal'][0][3]
except:
highTemp = 0
criticalTemp = 0
cpuCores = psutil.cpu_count()
cpuMaxfreq = psutil.cpu_freq().max
logicalDISKtotal = psutil.disk_usage(root_path).total
memTotal = psutil.virtual_memory().total
# Print Property result
print('============================')
print('Property List Upodate >>>>>>')
print("OS type : {os}".format(os=os_type))
print("OS Version : {osV}".format(osV=osVersion))
print("OS Build/Kernel : {osK}".format(osK=osBuildNumber))
print("Hostname : {host}".format(host=hostname_str))
print("CPU Info : {cpu}".format(cpu=cpuInfo))
print("CPU Core Count : {cpus}".format(cpus=cpuCores))
print("CPU Max Frequency : {cpuMF}".format(cpuMF=cpuMaxfreq))
if os_type == "Linux":
print("> CPU High Temp : {cpu_ht} Ce".format(cpu_ht=highTemp))
print("> CPU Critical : {cpu_ct} Ce".format(cpu_ct=criticalTemp))
print("BIOS Manufature : {biosM}".format(biosM=biosManufacturer))
print("BIOS Version : {biosV}".format(biosV=biosVersion))
print("Board Manufature : {boardM}".format(boardM=baseboardManufacturer))
print("Board Product : {boardP}".format(boardP=baseboardProduct))
print(
"Board SerialNumber : {boardSN}".format(boardSN=baseboardSerialNumber))
print("System DISK size : {diskSZ}".format(diskSZ=logicalDISKtotal))
print("Memory size : {memSZ}".format(memSZ=memTotal))
print("Local IP Address : {ip}".format(ip=ipLocal))
print("Public IP Address : {ip}".format(ip=ipPublic))
# For Multiple components
if os_type == "Windows":
properties_device_info = pnp_helper.create_reported_properties(
windows_device_info_component_name,
hostname=hostname_str,
cpuInfo=cpuInfo,
cpuCores=cpuCores,
cpuMaxfreq=cpuMaxfreq,
biosManufacturer=biosManufacturer,
biosVersion=biosVersion,
baseboardManufacturer=baseboardManufacturer,
baseboardSerialNumber=baseboardSerialNumber,
baseboardProduct=baseboardProduct,
osVersion=osVersion,
osBuildNumber=osBuildNumber,
memTotal=memTotal,
logicalDISKtotal=logicalDISKtotal,
ipLocal=ipLocal,
ipPublic=ipPublic,
)
elif os_type == "Linux":
properties_device_info = pnp_helper.create_reported_properties(
linux_device_info_component_name,
hostname=hostname_str,
cpuInfo=cpuInfo,
cpuCores=cpuCores,
cpuMaxfreq=cpuMaxfreq,
biosManufacturer=biosManufacturer,
biosVersion=biosVersion,
baseboardManufacturer=baseboardManufacturer,
baseboardSerialNumber=baseboardSerialNumber,
baseboardProduct=baseboardProduct,
osVersion=osVersion,
osBuildNumber=osBuildNumber,
memTotal=memTotal,
logicalDISKtotal=logicalDISKtotal,
ipLocal=ipLocal,
ipPublic=ipPublic,
highTemp=highTemp,
criticalTemp=criticalTemp,
)
global property_updates
property_updates = asyncio.gather(
device_client.patch_twin_reported_properties(properties_device_info), )
def get_cpu_temp(self):
cpu_temp = 0
t = psutil.sensors_temperatures()['coretemp']
for c in t:
cpu_temp = max(cpu_temp, c.current)
return cpu_temp
def sysinfo():
"""
get system information
"""
# processor_info
model_name = getoutput("egrep 'model name' /proc/cpuinfo -m 1").split(":")[-1]
print(f"Processor:{model_name}")
# get core count
total_cpu_count = int(getoutput("nproc --all"))
print("Cores:", total_cpu_count)
# get architecture
cpu_arch = pl.machine()
print("Architecture:", cpu_arch)
# get driver
driver = getoutput("cpufreqctl.auto-cpufreq --driver")
print("Driver: " + driver)
# get usage and freq info of cpus
usage_per_cpu = psutil.cpu_percent(interval=1, percpu=True)
# psutil current freq not used, gives wrong values with offline cpu's
minmax_freq_per_cpu = psutil.cpu_freq(percpu=True)
# max and min freqs, psutil reports wrong max/min freqs whith offline cores with percpu=False
max_freq = max([freq.max for freq in minmax_freq_per_cpu])
min_freq = min([freq.min for freq in minmax_freq_per_cpu])
print("\n" + "-" * 30 + " Current CPU states " + "-" * 30 + "\n")
print(f"CPU max frequency: {max_freq:.0f} MHz")
print(f"CPU min frequency: {min_freq:.0f} MHz\n")
# get coreid's and frequencies of online cpus by parsing /proc/cpuinfo
coreid_info = getoutput("egrep 'processor|cpu MHz|core id' /proc/cpuinfo").split("\n")
cpu_core = dict()
freq_per_cpu = []
for i in range(0, len(coreid_info), 3):
freq_per_cpu.append(float(coreid_info[i + 1].split(':')[-1]))
cpu = int(coreid_info[i].split(':')[-1])
core = int(coreid_info[i + 2].split(':')[-1])
cpu_core[cpu] = core
online_cpu_count = len(cpu_core)
offline_cpus = [str(cpu) for cpu in range(total_cpu_count) if cpu not in cpu_core]
# temperatures
core_temp = psutil.sensors_temperatures()
temp_per_cpu = [float("nan")] * online_cpu_count
try:
if "coretemp" in core_temp:
# list labels in 'coretemp'
core_temp_labels = [temp.label for temp in core_temp["coretemp"]]
for i, cpu in enumerate(cpu_core):
# get correct index in core_temp
core = cpu_core[cpu]
cpu_temp_index = core_temp_labels.index(f"Core {core}")
temp_per_cpu[i] = core_temp["coretemp"][cpu_temp_index].current
elif "k10temp" in core_temp:
# https://www.kernel.org/doc/Documentation/hwmon/k10temp
temp_per_cpu = [core_temp["k10temp"][0].current] * online_cpu_count
elif "zenpower" in core_temp:
# https://github.com/AdnanHodzic/auto-cpufreq/issues/145#issuecomment-763294009
temp_per_cpu = [core_temp["zenpower"][0].current] * online_cpu_count
elif "acpitz" in core_temp:
temp_per_cpu = [core_temp["acpitz"][0].current] * online_cpu_count
except:
pass
print("\t Usage Temperature Frequency")
for (cpu, usage, freq, temp) in zip(cpu_core, usage_per_cpu, freq_per_cpu, temp_per_cpu):
print(f"CPU{cpu}:\t{usage:>5.1f}% {temp:>3.0f} °C {freq:>5.0f} MHz")
if offline_cpus:
print(f"\nDisabled CPUs: {','.join(offline_cpus)}")
# get average temperature of all cores
avg_cores_temp = sum(temp_per_cpu)
global avg_all_core_temp
avg_all_core_temp = float(avg_cores_temp/online_cpu_count)
def burn(x: int = cpu_count()) -> heat_metrics:
try:
if x >= cpu_count():
x = x - 1
x * x
except:
raise SystemExit
return heat_metrics(mins=float(argv[2]), cool=False)
if __name__ == '__main__':
try:
n_cpu = int(argv[1])
ts = datetime.now()
device = 'nct6796'
T0 = sensors_temperatures().get(device)[2].current
c = Fore.GREEN
nc = Style.RESET_ALL
print(ts)
print(' {c}{}°{nc} CPUs: {c}{}{nc}'.format(T0, n_cpu, c=c, nc=nc))
with Pool(n_cpu) as p:
p.map(burn, range(n_cpu))
print('\n Starting {}Cooling{nc} until {c}{}{nc}'.format(Fore.BLUE,
T0,
c=c,
nc=nc))
ts0 = datetime.now()
heat_metrics(mins=1, cool=True, limit=T0)
ts_d = ts0 - datetime.now()
print('Finished Cooling in {c}{}'.format(ts_d, c=c))
def GetSensorsTemperature():
senstemp = psutil.sensors_temperatures(fahrenheit=False)
return senstemp
def test_temperatures(self):
if not psutil.sensors_temperatures():
self.skipTest("no temperatures")
self.assert_stdout('temperatures.py')
def _get_cpu_tmp_(self):
return str(psutil.sensors_temperatures()['cpu-thermal'][0].current)
def _machine_stats(self):
"""
:return: machine stats dictionary, all values expressed in megabytes
"""
cpu_usage = [float(v) for v in psutil.cpu_percent(percpu=True)]
stats = {
"cpu_usage": sum(cpu_usage) / float(len(cpu_usage)),
}
bytes_per_megabyte = 1024**2
def bytes_to_megabytes(x):
return x / bytes_per_megabyte
virtual_memory = psutil.virtual_memory()
stats["memory_used_gb"] = bytes_to_megabytes(
virtual_memory.used) / 1024
stats["memory_free_gb"] = bytes_to_megabytes(
virtual_memory.available) / 1024
disk_use_percentage = psutil.disk_usage(Text(Path.home())).percent
stats["disk_free_percent"] = 100.0 - disk_use_percentage
with warnings.catch_warnings():
if logging.root.level > logging.DEBUG: # If the logging level is bigger than debug, ignore
# psutil.sensors_temperatures warnings
warnings.simplefilter("ignore", category=RuntimeWarning)
sensor_stat = (psutil.sensors_temperatures() if hasattr(
psutil, "sensors_temperatures") else {})
if "coretemp" in sensor_stat and len(sensor_stat["coretemp"]):
stats["cpu_temperature"] = max(
[float(t.current) for t in sensor_stat["coretemp"]])
# update cached measurements
net_stats = psutil.net_io_counters()
stats["network_tx_mbs"] = bytes_to_megabytes(net_stats.bytes_sent)
stats["network_rx_mbs"] = bytes_to_megabytes(net_stats.bytes_recv)
io_stats = psutil.disk_io_counters()
stats["io_read_mbs"] = bytes_to_megabytes(io_stats.read_bytes)
stats["io_write_mbs"] = bytes_to_megabytes(io_stats.write_bytes)
# check if we can access the gpu statistics
if self._gpustat:
try:
gpu_stat = self._gpustat.new_query()
for i, g in enumerate(gpu_stat.gpus):
# only monitor the active gpu's, if none were selected, monitor everything
if self._active_gpus and i not in self._active_gpus:
continue
stats["gpu_%d_temperature" % i] = float(
g["temperature.gpu"])
stats["gpu_%d_utilization" % i] = float(
g["utilization.gpu"])
stats["gpu_%d_mem_usage" % i] = 100. * float(
g["memory.used"]) / float(g["memory.total"])
# already in MBs
stats["gpu_%d_mem_free_gb" %
i] = float(g["memory.total"] -
g["memory.used"]) / 1024
stats["gpu_%d_mem_used_gb" %
i] = float(g["memory.used"]) / 1024
except Exception:
# something happened and we can't use gpu stats,
self._gpustat_fail += 1
if self._gpustat_fail >= 3:
self._task.get_logger().report_text(
'TRAINS Monitor: GPU monitoring failed getting GPU reading, '
'switching off GPU monitoring')
self._gpustat = None
return stats
def test_sensors_temperatures(self):
# Duplicate of test_system.py. Keep it anyway.
for name, units in psutil.sensors_temperatures().items():
self.assertIsInstance(name, str)
for unit in units:
self.assertIsInstance(unit.label, str)
def test_sensors_temperatures(self):
# Duplicate of test_system.py. Keep it anyway.
for name, units in psutil.sensors_temperatures().items():
self.assertIsInstance(name, str)
for unit in units:
self.assertIsInstance(unit.label, str)
#!/usr/bin/python3
import psutil
import socket
import time
TARGET_IP="192.168.28.53"
TARGET_PORT=1234
while True:
temperature = 0.0
time.sleep(0.5)
temperature += psutil.sensors_temperatures()["coretemp"][0].current
time.sleep(0.5)
temperature += psutil.sensors_temperatures()["coretemp"][0].current
time.sleep(0.5)
temperature += psutil.sensors_temperatures()["coretemp"][0].current
time.sleep(0.5)
temperature += psutil.sensors_temperatures()["coretemp"][0].current
time.sleep(0.5)
temperature += psutil.sensors_temperatures()["coretemp"][0].current
temperature /= 5.0
cores = psutil.cpu_percent(percpu=True)
out = str(temperature) + "," + ",".join(map(str, sorted(cores, reverse=True)))
socket.socket(socket.AF_INET, socket.SOCK_DGRAM).sendto(out.encode("utf-8"), (TARGET_IP, TARGET_PORT))
def run():
db = Database()
_time = int(time.time())
cpu_usage = psutil.cpu_percent()
disk_space = psutil.disk_usage('/var/lib/docker')
disk_usage = psutil.disk_io_counters(perdisk=False)
network_usage = psutil.net_io_counters(pernic=True)
temperatures = psutil.sensors_temperatures()
def get_average(items):
items = [item.current for item in items]
return sum(items) / len(items)
db.insert_hardware(
_time, {
"component": "ram",
"hw_id": None,
"utilisation": psutil.virtual_memory().percent,
"temperature": None,
"power_consumption": None,
})
db.insert_hardware(
_time, {
"component": "disk_space",
"hw_id": None,
"utilisation": disk_space.free,
"temperature": None,
"power_consumption": None,
})
'''
db.insert_hardware(_time, {
"component": "disk_usage",
"hw_id": None,
"utilisation": disk_usage.read_count,
"temperature": None,
"power_consumption": None,
})
for item in network_usage:
db.insert_hardware(_time, {
"component": "network",
"hw_id": item,
"utilisation": network_usage[item].bytes_recv,
"temperature": None,
"power_consumption": None,
})
'''
db.insert_hardware(
_time,
{
"component": "cpu",
"hw_id": None,
"utilisation": psutil.cpu_percent(),
"temperature": None, #get_average(temperatures['coretemp']),
"power_consumption": None,
})
for gpu in GPUtil.getGPUs():
db.insert_hardware(
_time, {
"component": "gpu",
"hw_id": gpu.id,
"utilisation": gpu.load * 100,
"temperature": gpu.temperature,
"power_consumption": float(exec("gpu_power", args=(gpu.id))),
})
def test_temperatures(self):
if hasattr(psutil, "sensors_temperatures") and \
psutil.sensors_temperatures():
self.assert_stdout('temperatures.py')
else:
self.assert_syntax('temperatures.py')
def main():
####################
# MEASUREMENTS
####################
# Number of CPUs
num_total_cpu = psutil.cpu_count(
) # Total CPU count (physical and virtual)
num_physical_cpu = psutil.cpu_count(logical=False) # Physical CPU count
min_cpu_freq = psutil.cpu_freq().min # Minimum operating frequency
max_cpu_freq = psutil.cpu_freq().max # Maximum operating frequency
# Overall motion controller CPU percent usage
# Ignore first value. See documentation on usage
psutil.cpu_percent()
psutil.cpu_percent(percpu=True)
total_cpu_percent = list() # Total CPU usage
per_cpu_percent = list() # Per CPU usage
# Real time CPU frequency
total_cpu_freq = list() # Real time CPU frequency
per_cpu_freq = list() # Real time per CPU frequency
per_cpu_temp = list() # CPU temperature
total_context_switches = 0 # Total number of context switches
# Resource heavy processes for monitoring
planning_cpu_affinity = [
p.cpu_affinity() for p in psutil.process_iter()
if 'mujin_plannings' in p.as_dict(attrs=['pid', 'name'])['name']
]
rbridges_cpu_affinity = [
p.cpu_affinity() for p in psutil.process_iter()
if 'mujin_robotbridges_start' in p.as_dict(
attrs=['pid', 'name'])['name']
]
######################
# INFRASTRUCTURE SETUP
######################
parser = argparse.ArgumentParser(
description='Script for collecting motion controller data')
parser.add_argument(
'-mpt',
'--motion_controller_port',
action='store',
type=int,
dest='motionServerPort',
default=24000,
help='Motion controller data collection server port. Default is 7777')
parser.add_argument('-vip',
'--vision_controller_server',
action='store',
type=str,
dest='visionServerIp',
required=True,
help='Vision controller IP address')
parser.add_argument(
'-vpt',
'--',
action='store',
type=int,
dest='visionServerPort',
default=24001,
help='Vision controller data collection server port. Default is 7777')
parser.add_argument('-sec',
'--seconds',
action='store',
type=int,
dest='samplingRate',
default=5,
help='Sample frequency: Number of seconds per sample')
options = parser.parse_args()
ConfigureLogging()
# Create server to listen for start event (for collecting motion controller data)
log.warn(
'Starting motion controller server and connecting to vision controller server...'
)
visionControllerClient = SyncTestWithControllerClient(
options.visionServerIp, options.visionServerPort
) # Create vision controller client to sync tests
motionControllerServer = SyncTestWithControllerServer(
options.motionServerPort, visionControllerClient)
motionControllerServer.Start(
) # Spin off thread to listen for start and stop events from motion controller
log.warn('Created motion controller server!')
# Wait for start data collection event
log.warn('Motion server listening for start collection event!')
while motionControllerServer.ShouldRun() is not True:
continue
log.warn(
'Motion server received start data collection event and successfully synced with vision controller. Starting data collection on motion controller!'
)
#########################
# DATA COLLECTION
#########################
# Start measuring context switches
contextSwitchesStart = psutil.cpu_stats().ctx_switches
# Waits for controller to set 'isRunningOrderCycle' to False (production cycles finished running)
lastSample = time.time()
sampleInterval = options.samplingRate
while motionControllerServer.ShouldRun() is not False:
timeLapsed = time.time() - lastSample
if timeLapsed > sampleInterval:
total_cpu_percent.append(psutil.cpu_percent())
per_cpu_percent.append(psutil.cpu_percent(percpu=True))
total_cpu_freq.append(psutil.cpu_freq().current)
per_cpu_freq.append(
[cpuFreq.current for cpuFreq in psutil.cpu_freq(percpu=True)])
per_cpu_temp.append([
cpuTemp.current
for cpuTemp in psutil.sensors_temperatures()['coretemp'][1:(
num_total_cpu + 1)]
])
lastSample = time.time()
else:
continue
# Stop measuring context switches
total_context_switches = psutil.cpu_stats(
).ctx_switches - contextSwitchesStart
log.warn(
'Stopped data collection on motion controller and requesting vision controller server to stop data collection'
)
# Stop motion controller data colelction server
log.warn('Stopping motion controller server...')
motionControllerServer.Stop()
log.warn('Stopped motion controller server!')
###################################
# COLLECT DATA FROM ORDER CYCLE LOG
###################################
# Collect data from /var/log/mujin/ordercycles/ordercycles.log
logFile = '/var/log/mujin/ordercycles/ordercycles.log'
orderCycleLogEntry = cpuTestUtilities.ParseRotatedLog(
logFile,
logparserfn=lambda cursor, line: (cursor, ujson.loads(line)),
limit=1)[0][1]
total_time = float(orderCycleLogEntry['cycleElapsedProcessingTime'])
num_cycles = len(orderCycleLogEntry['cycleStatistics']['executed'])
detection_times = [
cycle['objectDetectionTime']
for cycle in orderCycleLogEntry['visionStatistics']['detectionHistory']
]
planning_times = [
cycle['totalPlanningComputationTime']
for cycle in orderCycleLogEntry['cycleStatistics']['executed']
]
trajectory_times = [
cycle['trajtotalduration']
for cycle in orderCycleLogEntry['cycleStatistics']['executed']
]
#####################################
# WRITE DATA TO FILES AND SAVE GRAPHS
#####################################
log.warn('Writing motion controller data...')
# Data
kwargs = \
{ \
'num_total_cpu': num_total_cpu, \
'num_physical_cpu': num_physical_cpu, \
'min_cpu_freq': min_cpu_freq, \
'max_cpu_freq': max_cpu_freq, \
'total_time': total_time, \
'num_cycles': num_cycles, \
'detection_times': detection_times, \
'planning_times': planning_times, \
'trajectory_times': trajectory_times, \
'total_cpu_percent': total_cpu_percent, \
'per_cpu_percent': per_cpu_percent, \
'total_cpu_freq': total_cpu_freq, \
'per_cpu_freq': per_cpu_freq, \
'per_cpu_temp': per_cpu_temp, \
'total_context_switches': total_context_switches, \
'planning_cpu_affinity': planning_cpu_affinity, \
'rbridges_cpu_affinity': rbridges_cpu_affinity \
}
# Write to output file
WriteDataSaveGraphData(**kwargs)
log.warn('Finished writing motion controller data!')
async def view_log(websocket, path):
global config
global dmrids
logging.info('Connected, remote={}, path={}'.format(websocket.remote_address, path))
try:
try:
parse_result = urlparse(path)
except Exception:
raise ValueError('Fail to parse URL', format(path))
path = os.path.abspath(parse_result.path)
now = datetime.datetime.now(datetime.timezone.utc)
year = str(now.year)
month = str(now.month)
if len(month) == 1:
month = "0" + month
day = str(now.day)
if len(day) == 1:
day = "0" + day
file_path = ""
if path == "/MMDVM":
if config['DEFAULT']['Filerotate'] == "True":
file_path = config['MMDVMHost']['Logdir']+config['MMDVMHost']['Prefix']+"-"+year+"-"+month+"-"+day+".log"
else:
file_path = config['MMDVMHost']['Logdir']+config['MMDVMHost']['Prefix']+".log"
elif path == "/DAPNET":
if config['DEFAULT']['Filerotate'] == "True":
file_path = config['DAPNETGateway']['Logdir']+config['DAPNETGateway']['Prefix']+"-"+year+"-"+month+"-"+day+".log"
else:
file_path = config['DAPNETGateway']['Logdir']+config['DAPNETGateway']['Prefix']+".log"
if path == "/MMDVM" or path == "/DAPNET":
logging.info(file_path)
if not os.path.isfile(file_path):
raise ValueError('File not found', format(file_path))
with open(file_path, newline = '\n', encoding="utf8", errors='ignore') as f:
content = ''.join(deque(f, int(config['DEFAULT']['MaxLines'])))
content = conv.convert(content, full=False)
lines = content.split("\n")
for line in lines:
if line.find("received") > 0 or line.find("network watchdog") > 0:
if line.find("from ") > 0 and line.find("to ") > 0:
source = line[line.index("from ") + 5:line.index("to ")].strip()
if source in dmrids:
line = line.replace(source, dmrids[source])
if source in callsigns:
newval = source + "$" + callsigns[source] + "$"
line = line.replace(source, newval)
if line.find("to ") > 0:
if line.find("at ") > 0 and line.find("late entry") < 0:
target = line[line.index("to ") + 3:line.rindex("at ")]
if target in dmrids:
line = line.replace(target, dmrids[target])
if target in callsigns:
newval = target + "$" + callsigns[target] + "$"
line = line.replace(target, newval)
else:
target = line[line.index("to") + 3:]
if target.find(",") > 0:
target = target[0:target.index(",")]
if target in dmrids:
line = line.replace(target, dmrids[target])
if target in callsigns:
newval = target + "$" + callsigns[target] + "$"
line = line.replace(target, newval)
await websocket.send(line)
while True:
content = f.read()
if content:
content = conv.convert(content, full=False)
lines = content.split("\n")
for line in lines:
if line.find("received") > 0 or line.find("network watchdog") > 0 or line.find("transmission lost") > 0:
if line.find("from ") > 0 and line.find("to ") > 0:
source = line[line.index("from ") + 5:line.index("to ")].strip()
if source in dmrids:
line = line.replace(source, dmrids[source])
if source in callsigns:
newval = source + "$" + callsigns[source] + "$"
line = line.replace(source, newval)
if line.find("to ") > 0:
if line.find("at ") > 0 and line.find("late entry") < 0:
target = line[line.index("to ") + 3:line.rindex("at ")]
if target in dmrids:
line = line.replace(target, dmrids[target])
if target in callsigns:
newval = target + "$" + callsigns[target] + "$"
line = line.replace(target, newval)
else:
target = line[line.index("to") + 3:]
if target.find(",") > 0:
target = target[0:target.index(",")]
if target in dmrids:
line = line.replace(target, dmrids[target])
if target in callsigns:
newval = target + "$" + callsigns[target] + "$"
line = line.replace(target, newval)
await websocket.send(line)
else:
await asyncio.sleep(0.2)
if path == "/SYSINFO":
mmdvmhost_version = str(subprocess.Popen(config['MMDVMHost']['MMDVM_bin'] + " -v", shell=True, stdout=subprocess.PIPE).stdout.read().decode("utf-8"))
mmdvmhost_ctime = time.ctime(os.path.getmtime(config['MMDVMHost']['MMDVM_bin']))
mmdvmhost_buildtime = datetime.datetime.strptime(mmdvmhost_ctime, "%a %b %d %H:%M:%S %Y")
mmdvm_version = getMMDVMVersion()
callsign = mmdvmhost_config['General']['Callsign']
dmrid = mmdvmhost_config['General']['Id']
txqrg = mmdvmhost_config['Info']['TXFrequency']
rxqrg = mmdvmhost_config['Info']['RXFrequency']
await websocket.send("HOSTINFO: mmdvmhost_version:" + mmdvmhost_version + " mmdvmhost_ctime:" + mmdvmhost_ctime + " mmdvm_version:" + mmdvm_version + " callsign:" + callsign + " dmrid:" + dmrid + " txqrg:" + txqrg + " rxqrg:" + rxqrg)
await asyncio.sleep(1)
while True:
cpu_temp = ""
temps = psutil.sensors_temperatures()
if not temps:
cpu_temp = "N/A"
for name, entries in temps.items():
for entry in entries:
if entry.label or name == "cpu_thermal":
cpu_temp = str(entry.current)
cpufrqs = psutil.cpu_freq()
cpufrq = "N/A"
if cpufrqs:
cpufrq = str(cpufrqs.current)
cpu_usage = str(psutil.cpu_percent())
cpu_load = os.getloadavg();
cpu_load1 = str(cpu_load[0])
cpu_load5 = str(cpu_load[1])
cpu_load15 = str(cpu_load[2])
ram = psutil.virtual_memory()
ram_total = str(ram.total / 2**20)
ram_used = str(ram.used / 2**20)
ram_free = str(ram.free / 2**20)
ram_percent_used = str(ram.percent)
disk = psutil.disk_usage('/')
disk_total = str(disk.total / 2**30)
disk_used = str(disk.used / 2**30)
disk_free = str(disk.free / 2**30)
disk_percent_used = str(disk.percent)
await websocket.send("SYSINFO: cputemp:" + cpu_temp + " cpufrg:" + cpufrq + " cpuusage:" + cpu_usage + " cpu_load1:" + cpu_load1 + " cpu_load5:" + cpu_load5 + " cpu_load15:" + cpu_load15 + " ram_total:" + ram_total + " ram_used:" + ram_used + " ram_free:" + ram_free + " ram_percent_used:" + ram_percent_used + " disk_total:" + disk_total + " disk_used:" + disk_used + " disk_free:" + disk_free + " disk_percent_used:" + disk_percent_used)
await asyncio.sleep(10)
if path == "/SERVICES":
services_items = [x for x in config.items('ServiceMonitoring') if x[0] not in config.defaults()]
while True:
for key, value in services_items:
logging.info('key: ' + key + " = " + value)
if checkIfProcessRunning(value):
logging.info('process ' + value + " is running")
await websocket.send("SERVICESMONITOR: " + value + ":running")
else:
logging.info('process ' + value + " is stopped")
await websocket.send("SERVICESMONITOR: " + value + ":stopped")
await asyncio.sleep(30)
except ValueError as e:
try:
await websocket.send('Logtailer-Errormessage: ValueError: {}'.format(e))
await websocket.close()
except Exception:
pass
log_close(websocket, path, e)
except Exception as e:
try:
await websocket.send('Logtailer-Errormessage: Error: {}'.format(e))
await websocket.close()
except Exception:
pass
log_close(websocket, path, e)
else:
log_close(websocket, path)
async def handle_input(data, reader: asyncio.StreamReader,
writer: asyncio.StreamWriter):
format = data.get("type", None)
if format is None:
# if the client won't tell us what they're sending why should we even bother
log.warning(
f"server: Broken client sent data without a type. Dropping")
raise TypeError("Invalid packet (no type given)")
if format == "ping":
# Send back a double with ping time in ms
writer.write(struct.pack(">d", client.latency * 1000))
await writer.drain()
return
if format == "status":
# Send back a whole dict of information
response = {
"time": time.time(),
"active": client.active,
"uptime": time.perf_counter() - client.first_execution,
"latency": client.latency * 1000,
"servers": len(client.guilds),
"msg_count": client.message_count,
"cmd_count": client.command_count,
"cache_len": len(client._connection._messages),
"pid": os.getpid(),
"hostname": socket.gethostname(),
"cpu_temp":
psutil.sensors_temperatures()['cpu-thermal'][0].current,
}
response = json.dumps(response).encode()
length = len(response)
response = struct.pack(">L", length) + response
writer.write(response)
await writer.drain()
return
if format == "msg_send":
target_id = data.get("id", None)
message = data.get("msg", "")
if target_id is None:
raise ValueError("No target provided")
if message == "":
raise ValueError("No message provided")
target: discord.User = client.get_user(target_id)
if target is None:
target: discord.TextChannel = client.get_channel(target_id)
if target is None:
raise LookupError("Unknown recipient")
assert isinstance(target, discord.TextChannel)
else:
assert isinstance(target, discord.User)
try:
msg = await target.send(message)
except discord.Forbidden as exc:
response = {
"success": False,
"error": "Invalid Permissions",
"description": f"Forbidden: {str(exc)}"
}
except discord.HTTPException as exc:
response = {
"success": False,
"error": "Message Send Failure",
"description": f"HTTPException: {str(exc)}"
}
except Exception as exc:
response = {
"success": False,
"error": "Unknown error",
"description": str(exc)
}
else:
response = {
"success": True,
"time": str(msg.created_at),
"guild": msg.guild.name,
"channel": msg.channel.name,
}
response = json.dumps(response).encode()
response = struct.pack(">L", len(response)) + response
writer.write(response)
await writer.drain()
return
if format == "enable":
client.active = True
writer.write(struct.pack(">L?", 1, True))
await writer.drain()
return
if format == "disable":
client.active = False
writer.write(struct.pack(">L?", 1, True))
await writer.drain()
async def stats(self, ctx):
_(
"""Show some stats about the bot, ranging from hard- and software statistics, over performance to ingame stats."""
)
async with self.bot.pool.acquire() as conn:
characters = await conn.fetchval("SELECT COUNT(*) FROM profile;")
items = await conn.fetchval("SELECT COUNT(*) FROM allitems;")
pg_version = conn.get_server_version()
temps = psutil.sensors_temperatures()
temps = temps[list(temps.keys())[0]]
cpu_temp = statistics.mean(x.current for x in temps)
pg_version = f"{pg_version.major}.{pg_version.micro} {pg_version.releaselevel}"
d0 = self.bot.user.created_at
d1 = datetime.datetime.now()
delta = d1 - d0
myhours = delta.days * 1.5
sysinfo = distro.linux_distribution()
if self.bot.owner_ids:
owner = nice_join(
[str(await self.bot.get_user_global(u)) for u in self.bot.owner_ids]
)
else:
owner = str(await self.bot.get_user_global(self.bot.owner_id))
guild_count = sum(
await self.bot.cogs["Sharding"].handler("guild_count", self.bot.shard_count)
)
meminfo = psutil.virtual_memory()
cpu_freq = psutil.cpu_freq()
cpu_name = await get_cpu_name()
compiler = re.search(r".*\[(.*)\]", sys.version)[1]
embed = discord.Embed(
title=_("IdleRPG Statistics"),
colour=0xb8bbff,
url=self.bot.BASE_URL,
description=_(
"Official Support Server Invite: https://support.idlerpg.xyz"
),
)
embed.set_thumbnail(url=self.bot.user.avatar_url)
embed.set_footer(
text=f"IdleRPG {self.bot.version} | By {owner}",
icon_url=self.bot.user.avatar_url,
)
embed.add_field(
name=_("Hosting Statistics"),
value=_(
"""\
CPU: **{cpu_name}**
CPU Usage: **{cpu}%**, **{cores}** cores/**{threads}** threads @ **{freq}** GHz
RAM Usage: **{ram}%** (Total: **{total_ram}**)
CPU Temperature: **{cpu_temp}°C**
Python Version **{python}** <:python:445247273065250817>
discord.py Version **{dpy}**
Compiler: **{compiler}**
Operating System: **{osname} {osversion}**
Kernel Version: **{kernel}**
PostgreSQL Version: **{pg_version}**
Redis Version: **{redis_version}**"""
).format(
cpu_name=cpu_name,
cpu=psutil.cpu_percent(),
cores=psutil.cpu_count(logical=False),
threads=psutil.cpu_count(),
cpu_temp=round(cpu_temp, 2),
freq=cpu_freq.max / 1000
if cpu_freq.max
else round(cpu_freq.current / 1000, 2),
ram=meminfo.percent,
total_ram=humanize.naturalsize(meminfo.total),
python=platform.python_version(),
dpy=pkg.get_distribution("discord.py").version,
compiler=compiler,
osname=sysinfo[0].title(),
osversion=sysinfo[1],
kernel=os.uname().release if os.name == "posix" else "NT",
pg_version=pg_version,
redis_version=self.bot.redis_version,
),
inline=False,
)
embed.add_field(
name=_("Bot Statistics"),
value=_(
"""\
Code lines written: **{lines}**
Shards: **{shards}**
Servers: **{guild_count}**
Characters: **{characters}**
Items: **{items}**
Average hours of work: **{hours}**"""
).format(
lines=self.bot.linecount,
shards=self.bot.shard_count,
guild_count=guild_count,
characters=characters,
items=items,
hours=myhours,
),
inline=False,
)
await ctx.send(embed=embed)
(int(0*scale),int(90*scale)),
font,
scale / font_scale,
(0,255,0),
int(1*scale))
loads = psutil.getloadavg()
cv2.putText(images[2][2],
f'LOAD = {loads}',
(int(0*scale),int(120*scale)),
font,
scale / font_scale,
(0,255,0),
int(1*scale))
temps = psutil.sensors_temperatures()
package_temp = temps['coretemp'][0].current
package_limit = temps['coretemp'][0].high
cv2.putText(images[2][2],
f'CPU T = {package_temp:.1f} C',
(int(0*scale),int(150*scale)),
font,
scale / font_scale,
(0,255,0) if package_temp < package_limit else (0,255,255),
int(1*scale))
gpu_percs = pynvml.nvmlDeviceGetUtilizationRates(gpuObj)
gpu_mem = pynvml.nvmlDeviceGetMemoryInfo(gpuObj)
cv2.putText(images[2][2],
f'GPU % = Time : {gpu_percs.gpu} Mem : {100*gpu_mem.used/gpu_mem.total:.0f}',
(int(0*scale),int(180*scale)),
import requests
import psutil
id = 45
temp = psutil.sensors_temperatures()['coretemp'][0][1]
count = psutil.cpu_count()
url = 'http://localhost:8000/storedata'
import time
t = time.time()
while True:
if time.time() - t > 5:
temp = psutil.sensors_temperatures()['coretemp'][0][1]
myobj = {'data': str(id) + ',' + str(count) + ',' + str(temp)}
x = requests.post(url, json=myobj)
print(myobj['data'])
t = time.time()
