if ok1.keys in ['', [], None]: # No response was made
ok1.keys = None
# store data for thisExp (ExperimentHandler)
thisExp.addData('ok1.keys', ok1.keys)
if ok1.keys != None: # we had a response
thisExp.addData('ok1.rt', ok1.rt)
thisExp.nextEntry()
# the Routine "instrPractice" was not non-slip safe, so reset the non-slip timer
routineTimer.reset()
# set up handler to look after randomisation of conditions etc
practiceTrials = data.TrialHandler(
nReps=2.0,
method='random',
extraInfo=expInfo,
originPath=
u'/Users/patrickbissett/OneDrive/Poldrack/TrainedInhibition/PsychoPy/IntegratingDifferentCodeFlexibleStim12.psyexp',
trialList=data.importConditions('Trialtypes5.xlsx'),
seed=None,
name='practiceTrials')
thisExp.addLoop(practiceTrials) # add the loop to the experiment
thisPracticeTrial = practiceTrials.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb=thisPracticeTrial.rgb)
if thisPracticeTrial != None:
for paramName in thisPracticeTrial.keys():
exec(paramName + '= thisPracticeTrial.' + paramName)
for thisPracticeTrial in practiceTrials:
currentLoop = practiceTrials
# abbreviate parameter names if possible (e.g. rgb = thisPracticeTrial.rgb)
ori=0,
color='white',
colorSpace='rgb',
opacity=1,
depth=0.0)
# Create some handy timers
globalClock = core.Clock() # to track the time since experiment started
routineTimer = core.CountdownTimer(
) # to track time remaining of each (non-slip) routine
# set up handler to look after randomisation of conditions etc
instructions = data.TrialHandler(
nReps=1,
method='sequential',
extraInfo=expInfo,
originPath=-1,
trialList=data.importConditions('other/instructions.csv'),
seed=None,
name='instructions')
thisExp.addLoop(instructions) # add the loop to the experiment
thisInstruction = instructions.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisInstruction.rgb)
if thisInstruction != None:
for paramName in thisInstruction.keys():
exec(paramName + '= thisInstruction.' + paramName)
for thisInstruction in instructions:
currentLoop = instructions
# abbreviate parameter names if possible (e.g. rgb = thisInstruction.rgb)
if thisInstruction != None:
# refresh the screen
if continueRoutine: # don't flip if this routine is over or we'll get a blank screen
win.flip()
# -------Ending Routine "Instruction"-------
for thisComponent in InstructionComponents:
if hasattr(thisComponent, "setAutoDraw"):
thisComponent.setAutoDraw(False)
# the Routine "Instruction" was not non-slip safe, so reset the non-slip timer
routineTimer.reset()
# set up handler to look after randomisation of conditions etc
practice_trials = data.TrialHandler(
nReps=1,
method='random',
extraInfo=expInfo,
originPath=-1,
trialList=data.importConditions('conditions_practice.csv'),
seed=None,
name='practice_trials')
thisExp.addLoop(practice_trials) # add the loop to the experiment
thisPractice_trial = practice_trials.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisPractice_trial.rgb)
if thisPractice_trial != None:
for paramName in thisPractice_trial.keys():
exec(paramName + '= thisPractice_trial.' + paramName)
for thisPractice_trial in practice_trials:
currentLoop = practice_trials
# abbreviate parameter names if possible (e.g. rgb = thisPractice_trial.rgb)
if thisPractice_trial != None:
win.flip()
ready_screen.draw()
win.flip()
event.waitKeys(keyList=['space'])
# write logs
# send END log event
logging.log(level=logging.DATA,
msg='******* END run %i *******' % run_number)
# save the trial infomation from trial handler
log_filename2 = "%s_%i.csv" % (log_filename[:-4], run_number)
trials.saveAsText(log_filename2, delim=',', dataOut=('n', 'all_raw'))
# =====================
# MAIN
#
# - set up stimuli and runs
for ridx, run in enumerate(runs):
#print run
trials = data.TrialHandler(run,
nReps=1,
extraInfo=run_data,
dataTypes=['stim_onset', 'rt', 'rating'],
method='sequential')
do_run(ridx + 1, trials)
depth=0.0)
key_resp = keyboard.Keyboard()
# Initialize components for Routine "Last_Q"
Last_QClock = core.Clock()
# Create some handy timers
globalClock = core.Clock() # to track the time since experiment started
routineTimer = core.CountdownTimer(
) # to track time remaining of each (non-slip) routine
# set up handler to look after randomisation of conditions etc
trials_3 = data.TrialHandler(
nReps=1,
method='sequential',
extraInfo=expInfo,
originPath=-1,
trialList=data.importConditions('cond_batch_def.csv'),
seed=None,
name='trials_3')
thisExp.addLoop(trials_3) # add the loop to the experiment
thisTrial_3 = trials_3.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisTrial_3.rgb)
if thisTrial_3 != None:
for paramName in thisTrial_3:
exec('{} = thisTrial_3[paramName]'.format(paramName))
for thisTrial_3 in trials_3:
currentLoop = trials_3
# abbreviate parameter names if possible (e.g. rgb = thisTrial_3.rgb)
if thisTrial_3 != None:
def test_comparison_equals(self):
t1 = data.TrialHandler([dict(foo=1)], 2)
t2 = data.TrialHandler([dict(foo=1)], 2)
assert t1 == t2
def test_comparison_not_equal_after_iteration(self):
t1 = data.TrialHandler([dict(foo=1)], 2)
t2 = data.TrialHandler([dict(foo=1)], 3)
t1.__next__()
t2.__next__()
assert t1 != t2
for thisComponent in Instruct2Components:
if hasattr(thisComponent, "setAutoDraw"):
thisComponent.setAutoDraw(False)
# check responses
if key_resp_4.keys in ['', [], None]: # No response was made
key_resp_4.keys=None
thisExp.addData('key_resp_4.keys',key_resp_4.keys)
if key_resp_4.keys != None: # we had a response
thisExp.addData('key_resp_4.rt', key_resp_4.rt)
thisExp.nextEntry()
# the Routine "Instruct2" was not non-slip safe, so reset the non-slip timer
routineTimer.reset()
# set up handler to look after randomisation of conditions etc
practice = data.TrialHandler(nReps=1, method='random',
extraInfo=expInfo, originPath=-1,
trialList=data.importConditions('trialListPrac.xlsx'),
seed=None, name='practice')
thisExp.addLoop(practice) # add the loop to the experiment
thisPractice = practice.trialList[0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisPractice.rgb)
if thisPractice != None:
for paramName in thisPractice:
exec('{} = thisPractice[paramName]'.format(paramName))
for thisPractice in practice:
currentLoop = practice
# abbreviate parameter names if possible (e.g. rgb = thisPractice.rgb)
if thisPractice != None:
for paramName in thisPractice:
exec('{} = thisPractice[paramName]'.format(paramName))
# refresh the screen
if continueRoutine: # don't flip if this routine is over or we'll get a blank screen
win.flip()
# -------Ending Routine "instructions"-------
for thisComponent in instructionsComponents:
if hasattr(thisComponent, "setAutoDraw"):
thisComponent.setAutoDraw(False)
# the Routine "instructions" was not non-slip safe, so reset the non-slip timer
routineTimer.reset()
# set up handler to look after randomisation of conditions etc
block = data.TrialHandler(nReps=2,
method='random',
extraInfo=expInfo,
originPath=-1,
trialList=[None],
seed=None,
name='block')
thisExp.addLoop(block) # add the loop to the experiment
thisBlock = block.trialList[0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisBlock.rgb)
if thisBlock != None:
for paramName in thisBlock:
exec('{} = thisBlock[paramName]'.format(paramName))
for thisBlock in block:
currentLoop = block
# abbreviate parameter names if possible (e.g. rgb = thisBlock.rgb)
if thisBlock != None:
for paramName in thisBlock:
trialLists = [
genTrials(ii,
shape_trials,
shape_lures,
col_trials,
col_lures,
num_stims,
min_dist,
grid_size,
participantNum=participantNum) for ii in range(Blocks)
]
#practice trials
pracList = genTrials('Practice',
4,
2,
0,
0, [4, 8],
min_dist,
grid_size,
participantNum=participantNum)
taskTrials = [
data.TrialHandler(trialLists[ii], 1) for ii in range(len(trialLists))
]
for handlerNum in range(len(trialLists)):
taskTrials[handlerNum].data.addDataType('resp')
taskTrials[handlerNum].data.addDataType('RT')
pracTrials = data.TrialHandler(pracList, 1)
pracTrials.data.addDataType('resp')
pracTrials.data.addDataType('RT')
print('cueMS from frames =', cueFrames*(1000./refreshRate))
print('num of SOAs in the trial:', trialFrames/SOAFrames)
##Factorial design
numResponsesPerTrial = 1 #default. Used to create headers for dataFile
stimList = []
#cuePositions = [dot for dot in range(nDots) if dot not in [0,nDots-1]]
cuePositions = [10]
print('cuePositions: ',cuePositions)
#cuePositions = cuePositions[2:(nDots-3)] #drop the first and final two dots
#Set up the factorial design (list of all conditions)
for cuePos in cuePositions:
stimList.append({'cuePos':cuePos})
trials = data.TrialHandler(stimList, nReps = trialsPerCondition)
#print(trials)
####Create output file###
#########################################################################
dataFile = open(fileNameWithPath + '.txt', 'w')
numResponsesPerTrial = 1
#headers for initial datafile rows, they don't get repeated. These appear in the file in the order they appear here.
oneOffHeaders = [
'subject',
'task',
'staircase',
'trialNum'
]
core.quit()
# refresh the screen
if continueRoutine: # don't flip if this routine is over or we'll get a blank screen
win.flip()
# -------Ending Routine "scannerwarmup"-------
for thisComponent in scannerwarmupComponents:
if hasattr(thisComponent, "setAutoDraw"):
thisComponent.setAutoDraw(False)
# set up handler to look after randomisation of conditions etc
trials = data.TrialHandler(nReps=1,
method='sequential',
extraInfo=expInfo,
originPath=-1,
trialList=data.importConditions(u'event_rt.csv'),
seed=1,
name='trials')
thisExp.addLoop(trials) # add the loop to the experiment
thisTrial = trials.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisTrial.rgb)
if thisTrial != None:
for paramName in thisTrial.keys():
exec(paramName + '= thisTrial.' + paramName)
for thisTrial in trials:
currentLoop = trials
# abbreviate parameter names if possible (e.g. rgb = thisTrial.rgb)
if thisTrial != None:
font='Arial',
units='deg')
fixation = visual.PatchStim(win,
color=-1,
tex=None,
mask='circle',
size=0.2,
units='deg')
# create the list of stimulus conditions: 3 T1 positions, and 8 T2 positions (or 8 lags), i.e., 24 stimulus conditions
stimList = []
for T1pos in [5, 6, 7]:
for T2pres in [1]:
for T2pos in [1, 3, 5, 7, 9]:
stimList.append({'T1pos': T1pos, 'T2pres': T2pres, 'T2pos': T2pos})
trials = data.TrialHandler(stimList, 15)
for thisTrial in trials:
T1position = trials.thisTrial['T1pos']
T1 = numbers[numpy.random.random_integers(0, 7)]
T2position = trials.thisTrial['T1pos'] + trials.thisTrial['T2pos']
if trials.thisTrial['T2pres'] == 1:
T2 = numbers[numpy.random.random_integers(0, 7)]
else:
T2 = letters[numpy.random.random_integers(0, 25)]
#fixation screen
for frameN in range(int(round(params['fp'] * params['frameRate']))):
fixation.draw()
print('graphical_elements_ok')
#randomize stimulus presentations (equal amounts per part)
stim = np.zeros(Ntrials)
s = np.repeat(np.arange(Ngratings), (Ntrials / Ngratings))
s = np.random.permutation(s)
stim = s
print('stim_ok')
# Within-subjects design
TrialList = []
TrialList.append({"gratings": stim.astype(int)})
print(TrialList)
trials = data.TrialHandler(trialList=TrialList, nReps=1, method="sequential")
thisExp.addLoop(trials)
# welcome screen
welcome.draw()
window.flip()
event.waitKeys(keyList="space")
instruct.draw()
example_1.draw()
example_2.draw()
window.flip()
event.waitKeys(keyList="space")
start.draw()
window.flip()
if instr1Resp.keys in ['', [], None]: # No response was made
instr1Resp.keys = None
thisExp.addData('instr1Resp.keys', instr1Resp.keys)
if instr1Resp.keys != None: # we had a response
thisExp.addData('instr1Resp.rt', instr1Resp.rt)
thisExp.addData('instr1Resp.started', instr1Resp.tStartRefresh)
thisExp.addData('instr1Resp.stopped', instr1Resp.tStopRefresh)
thisExp.nextEntry()
# the Routine "instructions" was not non-slip safe, so reset the non-slip timer
routineTimer.reset()
# set up handler to look after randomisation of conditions etc
trials = data.TrialHandler(nReps=1,
method='sequential',
extraInfo=expInfo,
originPath=-1,
trialList=data.importConditions('goNogoCond1.xlsx'),
seed=None,
name='trials')
thisExp.addLoop(trials) # add the loop to the experiment
thisTrial = trials.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisTrial.rgb)
if thisTrial != None:
for paramName in thisTrial:
exec('{} = thisTrial[paramName]'.format(paramName))
for thisTrial in trials:
currentLoop = trials
# abbreviate parameter names if possible (e.g. rgb = thisTrial.rgb)
if thisTrial != None:
#last screen
exit_screen = visual.TextStim(win,
text='Thank you for participating!',
pos=(0, 0),
units='norm',
height=0.1)
#logging
expdir = os.getcwd()
subjdir = '%s/logs/%s' % (expdir, subj_id)
if not os.path.exists(subjdir):
os.makedirs(subjdir)
log_file = os.path.join(subjdir, 'sub{}_Investment-Ratings-{}.csv')
trial_data = [r for r in csv.DictReader(open('TrustRatings.csv', 'rU'))]
trials = data.TrialHandler(trial_data[:], 1, method="sequential")
question_map = {'2': 'trustworthy', '1': 'likeable', '0': 'approachable'}
stim_map = {
'3': 'pos',
'2': 'neg',
'1': 'neu',
}
#clock
globalClock = core.Clock()
logging.setDefaultClock(globalClock)
timer = core.Clock()
#main task
if __continue.keys in ['', [], None]: # No response was made
__continue.keys = None
thisExp.addData('__continue.keys', __continue.keys)
if __continue.keys != None: # we had a response
thisExp.addData('__continue.rt', __continue.rt)
thisExp.addData('__continue.started', __continue.tStartRefresh)
thisExp.addData('__continue.stopped', __continue.tStopRefresh)
thisExp.nextEntry()
# the Routine "_instructions" was not non-slip safe, so reset the non-slip timer
routineTimer.reset()
# set up handler to look after randomisation of conditions etc
_loop_noises = data.TrialHandler(
nReps=1,
method='random',
extraInfo=expInfo,
originPath=-1,
trialList=data.importConditions('csvs/noise_conditions.csv'),
seed=None,
name='_loop_noises')
thisExp.addLoop(_loop_noises) # add the loop to the experiment
this_loop_noise = _loop_noises.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = this_loop_noise.rgb)
if this_loop_noise != None:
for paramName in this_loop_noise: # assign each variable to their corresponding value
exec('{} = this_loop_noise[paramName]'.format(paramName))
for this_loop_noise in _loop_noises:
currentLoop = _loop_noises
# abbreviate parameter names if possible (e.g. rgb = this_loop_noise.rgb)
if this_loop_noise != None:
thisComponent.setAutoDraw(False)
# check responses
if key_resp_3.keys in ['', [], None]: # No response was made
key_resp_3.keys = None
# store data for thisExp (ExperimentHandler)
thisExp.addData('key_resp_3.keys', key_resp_3.keys)
if key_resp_3.keys != None: # we had a response
thisExp.addData('key_resp_3.rt', key_resp_3.rt)
thisExp.nextEntry()
# set up handler to look after randomisation of conditions etc
trials = data.TrialHandler(
nReps=1,
method='random',
extraInfo=expInfo,
originPath=
u'/Users/aaron/Documents/GitHub/NCIL-SOC-2015/PsychoPy/stroop.psyexp',
trialList=data.importConditions(u'psychopy_playing_conditions.xlsx'),
seed=666,
name='trials')
thisExp.addLoop(trials) # add the loop to the experiment
thisTrial = trials.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb=thisTrial.rgb)
if thisTrial != None:
for paramName in thisTrial.keys():
exec(paramName + '= thisTrial.' + paramName)
for thisTrial in trials:
currentLoop = trials
# abbreviate parameter names if possible (e.g. rgb = thisTrial.rgb)
def test_comparison_not_equal(self):
t1 = data.TrialHandler([dict(foo=1)], 2)
t2 = data.TrialHandler([dict(foo=1)], 3)
assert t1 != t2
if expInfo['session'] == '1':
run = [1, 2, 1, 2, 2, 1, 2, 1, 1]
elif expInfo['session'] == '2':
run = [2, 2, 1, 1, 1, 2, 2, 1, 2]
myarray = []
for i in range(len(run)):
myarray.append(
{
'run': run[i],
'runNum': (i)
}
) #puts data into an array of dictionaries that the TrialHandler function will accept
block = data.TrialHandler(nReps=1,
method=u'sequential',
extraInfo=expInfo,
originPath=None,
trialList=myarray,
seed=None,
name='block')
thisExp.addLoop(block) #add the loop to the experiment
thisBlock = block.trialList[0] #so we can initialise stimuli with some values
#abbreviate parameter names if possible (e.g. rgb=thisBlock.rgb)
if thisBlock != None:
for paramName in thisBlock.keys():
exec(paramName + '=thisBlock.' + paramName)
begExpClock.reset()
for thisBlock in block:
currentLoop = block
#abbrieviate parameter names if possible (e.g. rgb=thisBlock.rgb)
if thisBlock != None:
for paramName in thisBlock.keys():
# refresh the screen
if continueRoutine: # don't flip if this routine is over or we'll get a blank screen
win.flip()
# -------Ending Routine "setup"-------
for thisComponent in setupComponents:
if hasattr(thisComponent, "setAutoDraw"):
thisComponent.setAutoDraw(False)
# the Routine "setup" was not non-slip safe, so reset the non-slip timer
routineTimer.reset()
# set up handler to look after randomisation of conditions etc
tasks = data.TrialHandler(nReps=3,
method='sequential',
extraInfo=expInfo,
originPath=-1,
trialList=[None],
seed=None,
name='tasks')
thisExp.addLoop(tasks) # add the loop to the experiment
thisTask = tasks.trialList[0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisTask.rgb)
if thisTask != None:
for paramName in thisTask:
exec('{} = thisTask[paramName]'.format(paramName))
for thisTask in tasks:
currentLoop = tasks
# abbreviate parameter names if possible (e.g. rgb = thisTask.rgb)
if thisTask != None:
for paramName in thisTask:
# refresh the screen
if continueRoutine: # don't flip if this routine is over or we'll get a blank screen
win.flip()
else: # this Routine was not non-slip safe so reset non-slip timer
routineTimer.reset()
#-------Ending Routine "instructions"-------
for thisComponent in instructionsComponents:
if hasattr(thisComponent, "setAutoDraw"):
thisComponent.setAutoDraw(False)
# set up handler to look after randomisation of conditions etc
trials = data.TrialHandler(nReps=1,
method=u'sequential',
extraInfo=expInfo,
originPath=None,
trialList=data.importConditions(csv_file),
seed=None,
name='trials')
thisExp.addLoop(trials) # add the loop to the experiment
thisTrial = trials.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb=thisTrial.rgb)
if thisTrial != None:
for paramName in thisTrial.keys():
exec(paramName + '= thisTrial.' + paramName)
for thisTrial in trials:
currentLoop = trials
# abbreviate parameter names if possible (e.g. rgb = thisTrial.rgb)
if thisTrial != None:
def run_experiment(self,
window_dim=[800, 600],
screen_index=0,
monitor_name="testMonitor"):
""" The main function that performs the stimulus presentation with synchronized timing
Args:
----
window_dim, screen_index, monitor_name: size, index, and name of stim presentation monitor. (see PsychoPy Window documentation for specifics)
Note:
----
- make sure to set SYN_CONNECTED = True when actually connected to Synapse
- to make sure the code runs smoothly, best to comment out all print statements before running an experiment
"""
if (self.SYN_CONNECTED):
# Connect to Synapse & switch to preview mode
syn = synex.syn_connect('192.168.1.37')
#defining the window
window = visual.Window(size=window_dim,
screen=screen_index,
monitor=monitor_name,
color=[-1, -1, -1],
units='pix')
#instantiate a generic flash stimulus; will set the specifics of the parameters (pres_dur, luminance) later in the loop.
flash = fs2.Flash_Stim(cur_screen=screen_index,
cur_monitor=monitor_name,
win_dim=window_dim,
pres_dur=0,
luminance=0)
marker = pdm.PhotodiodeMarker()
#making experimentHandler, and trials from rand_trials_sample
trials_subset = self.rand_trials_sample()
"""
data_info={"ISI": 's',
"flash_dur": 'ms',
"luminance": 'RGB ranging from -1 (black) to 1 (white)',
"wave_freq": 'hz', #waveFreq = freq of the tone
"pulse_dur": 'ms', #pulseDur = length of time the tone is played
"wave_amp": 'dB', #waveAmp = sound levels
"stimulus": '0 (A only), 1 (V only) , or 2 (A+V)',
"delay": 'ms' # delay between presenting A and V
}
"""
exp = data.ExperimentHandler(name='testExp',
savePickle=True,
saveWideText=True,
dataFileName='experiment')
trials = data.TrialHandler(
trialList=trials_subset, nReps=1, method='sequential'
) # since already randomized we can go ahead and use "sequential" here...
exp.addLoop(trials)
#load values into the buffer before the trial starts...
params_list = synex.get_params(trials)
if (self.SYN_CONNECTED):
syn.setMode(3) # switch to record mode
# event.waitKeys(keyList='space') #could put this in to have the actual experiment (1st pdm flash, etc.) start on keypress
expClock = core.Clock()
expClock.reset()
#the experiment loop! 0: Auditory only; 1: Visual only; 2: A+V
for trial in trials:
inter = trial['ISI_s']
#initial marker flash for each trial
for n in range(0, 10): #draw for 10 frames
marker.draw_marker(window)
window.flip()
"""
#print("Waiting system delay time...", self.SYSTEM_DELAY, " ms \n")
time.sleep(self.SYSTEM_DELAY/1000.0)
#maximum delay if presenting auditory before visual plus maybe 30-50% ~250ms + 125 = 375ms
sleep_time = (self.JITTER*1.5)/1000.0
time.sleep(sleep_time)
"""
stim_code = trial['stimulus']
if (self.SYN_CONNECTED):
#set the auditory value decided by Psychopy in Synapse: WaveAmp, WaveFreq, Delay (?)
synex.set_stim_params(params_list, syn, trials.thisTrialN)
synex.set_schmitt(syn, lockout_time=self.SYSTEM_DELAY
) # set the system delay lockout time
synex.set_stimcode(syn, stim_code)
if (stim_code == 0 or stim_code == 2): #auditory stim only || A+V
core.wait((self.JITTER + self.SYSTEM_DELAY) / 1000.0)
elif (stim_code == 1): #visual stim only
core.wait(self.JITTER / 1000.0)
if (stim_code == 0): #auditory stim only
#print("=============================\n")
#print("===Auditory component only===\n *Play tone at %d dB*\n" %trial['wave_amp_dB'])
trial['delay_ms'] = None #set all visual parameters to None
trial["flash_dur_ms"] = None
trial["luminance"] = None
trial['delay_ms'] = None
#wait while the audio is playing
exp.addData('Aud_onset', expClock.getTime())
core.wait(trial['pulse_dur_ms'] / 1000.0)
elif (stim_code == 1): #visual stim only
trial['wave_freq_Hz'] = None
trial['pulse_dur_ms'] = None
trial['wave_amp_dB'] = None
trial[
'delay_ms'] = None # set all audio-related parameters to none
if (self.SYN_CONNECTED):
#set the auditory value decided by Psychopy in Synapse: WaveAmp, WaveFreq, Delay (?)
syn.setParameterValue(
'aStim2', 'WaveAmp',
0) # set all values to 0 bc no auditory
syn.setParameterValue('aStim2', 'WaveFreq', 0)
syn.setParameterValue('aStim2', 'PulseDur', 0)
#print("===========================\n")
#print("===Visual component only===\n")
dur = (
trial['flash_dur_ms']
) / 1000.0 #pres. dur. in ms -> div by 1000 since flash takes in seconds
lum = trial['luminance'] # luminance
flash.pres_dur = dur
flash.luminance = lum
#print("Luminance: ", lum)
#present the stimulus
exp.addData('Vis_onset',
expClock.getTime()) #record visual onset time
marker.draw_marker(window)
flash.flash(window)
window.flip()
elif (stim_code == 2): #A+V stim
#option 1: Audio first: delay -
if (trial['delay_ms'] < 0
): #delay = time (ms) between A and V within the trial
#print("=================================================\n")
#print("===Auditory and visual components on: A first ===\n *Play tone at %d dB*\n" %trial['wave_amp_dB'])
# add auditory onset data
exp.addData('Aud_onset', expClock.getTime())
# wait while the audio is going + the delay btw stimuli
total_wait = (abs(trial['delay_ms']) +
trial['pulse_dur_ms']) / 1000.0
#print("Waiting for tone to play: " ,trial['pulse_dur_ms'] , "ms")
#print("Waiting (stimulus delay): " ,(trial['delay_ms']), " ms")
core.wait(total_wait)
dur = (trial['flash_dur_ms']) / 1000.0 #pres. dur. in ms
lum = trial['luminance'] # luminance
flash.pres_dur = dur
flash.luminance = lum
#print("Luminance: \n", lum)
# Record visual onset
exp.addData('Vis_onset', expClock.getTime())
#present the stimulus
marker.draw_marker(window)
flash.flash(window)
window.flip(
) #TODO: change to be timed by frame instead of seconds
#option 2: Visual first: delay +
if (trial['delay_ms'] > 0):
#print("=================================================\n")
#print("===Auditory and visual components on: V first ===\n *Play tone at %d dB*\n" %trial['wave_amp_dB'])
dur = (trial['flash_dur_ms']) / 1000.0 #pres. dur. in ms
lum = trial['luminance'] # luminance
flash.pres_dur = dur
flash.luminance = lum
#print("Luminance: \n", lum)
exp.addData('Vis_onset',
expClock.getTime()) # visual onset data
#present the stimulus
marker.draw_marker(window)
flash.flash(window)
window.flip(
) #TODO: change to be timed by frame instead of seconds
#convert delay to seconds
# total_wait = (trial['delay_ms']+trial['pulse_dur_ms'])/1000.0 # after visual presented, need to wait the delay btw stimuli + the duration of the audio pulse
#print("Waiting (stimulus delay): " ,trial['delay_ms'], " ms")
core.wait(trial['delay_ms'] / 1000.0)
exp.addData('Aud_onset', expClock.getTime())
#print("Waiting for tone to play: " ,trial['pulse_dur_ms'], "ms")
core.wait(trial['pulse_dur_ms'] / 1000.0)
#option 3: Simultaneous: delay 0
if (trial['delay_ms'] == 0):
#print("======================================================\n")
#print("===Auditory and visual components on: Simultaneous ===\n *Play tone at %d dB*\n" %trial['wave_amp_dB'])
dur = (trial['flash_dur_ms']) / 1000.0 #pres. dur. in ms
lum = trial['luminance'] # luminance
flash.pres_dur = dur
flash.luminance = lum
#print("Luminance: \n", lum)
exp.addData('Aud_onset', expClock.getTime())
exp.addData('Vis_onset', expClock.getTime())
#present the stimulus
marker.draw_marker(window)
flash.flash(window)
window.flip(
) #TODO: change to be timed by frame instead of seconds
#print("Waiting ISI Time: ", inter, 's \n')
core.wait(
inter - (self.JITTER / 1000.0)
) #inter stimulus interval = time between successive presentations
window.flip()
exp.nextEntry()
ori=0,
color='white',
colorSpace='rgb',
opacity=1,
depth=-5.0)
# Create some handy timers
globalClock = core.Clock() # to track the time since experiment started
routineTimer = core.CountdownTimer(
) # to track time remaining of each (non-slip) routine
# set up handler to look after randomisation of conditions etc
trials = data.TrialHandler(nReps=1,
method='sequential',
extraInfo=expInfo,
originPath=-1,
trialList=data.importConditions('Trust.csv'),
seed=None,
name='trials')
thisExp.addLoop(trials) # add the loop to the experiment
thisTrial = trials.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisTrial.rgb)
if thisTrial != None:
for paramName in thisTrial.keys():
exec(paramName + '= thisTrial.' + paramName)
for thisTrial in trials:
currentLoop = trials
# abbreviate parameter names if possible (e.g. rgb = thisTrial.rgb)
if thisTrial != None:
bubble = visual.Circle(win, fillColor='black', lineColor='black')
#==========================
# Define the trial sequence
#==========================
# Define a list of trials with their properties:
# - Which image (without the suffix)
# - Which orientation
stim_order = []
for im, ori in zip(imlist, orilist):
stim_order.append({'im': im, 'ori': ori})
trials = data.TrialHandler(stim_order,
nReps=1,
extraInfo=exp_info,
method='sequential',
originPath=datapath)
#=====================
# Start the experiment
#=====================
# Initialize two clocks:
# - for image change time
# - for response time
change_clock = core.Clock()
rt_clock = core.Clock()
# Run through the trials
for trial in trials:
#-------------------------------------------------------------------------------------------#
# ---------- usefule lists ----------
TrialComponents = [image] + sliderComponents + buttonComponents + ballComponents
# repeaet the trial for 5 times, range(0,5) = [0,1,2,3,4]
for k in range(0,5):
# ----- trial preparation -----
# set up handler to look after randomisation of conditions etc
trials = data.TrialHandler(nReps=1, method='sequential',
extraInfo=expInfo, originPath=-1,
trialList=data.importConditions(conditionFile[0], selection=selectionGenerator(ramDistractor)),
seed=None, name='trials')
thisExp.addLoop(trials) # add the loop to the experiment
thisTrial = trials.trialList[0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisTrial.rgb)
if thisTrial != None:
for paramName in thisTrial:
exec('{} = thisTrial[paramName]'.format(paramName))
# ----- enter one trial -----
for thisTrial in trials:
currentLoop = trials
if continueRoutine: # don't flip if this routine is over or we'll get a blank screen
win.flip()
win.clearBuffer()
# -------Ending Routine "instructPractice"-------
for thisComponent in instructPracticeComponents:
if hasattr(thisComponent, "setAutoDraw"):
thisComponent.setAutoDraw(False)
# the Routine "instructPractice" was not non-slip safe, so reset the non-slip timer
routineTimer.reset()
# set up handler to look after randomisation of conditions etc
practice = data.TrialHandler(nReps=1.0,
method='sequential',
extraInfo=expInfo,
originPath=-1,
trialList=data.importConditions('practice.xlsx'),
seed=None,
name='practice')
thisExp.addLoop(practice) # add the loop to the experiment
thisPractice = practice.trialList[
0] # so we can initialise stimuli with some values
# abbreviate parameter names if possible (e.g. rgb = thisPractice.rgb)
if thisPractice != None:
for paramName in thisPractice.keys():
exec(paramName + '= thisPractice.' + paramName)
for thisPractice in practice:
currentLoop = practice
# abbreviate parameter names if possible (e.g. rgb = thisPractice.rgb)
stimuli = exptInfo['05. Stimuli'].split(',')
stimList = []
for stimulus in stimuli:
for speed in speeds:
stimList.append({
'stimulus':
stimulus,
'speed':
speed,
'stimCueSound':
'./sounds/stim {}cms {}.wav'.format(speed, stimulus),
'timingCueSound':
'./sounds/timing {}cm-sec.wav'.format(speed)
})
trials = data.TrialHandler(stimList, exptInfo['03. Number of repeats'])
# ----
# -- MAKE FOLDER/FILES TO SAVE DATA --
saveFiles = DataFileCollection(
foldername=exptInfo['09. Folder for saving data'],
filename=exptInfo['02. Experiment name'] + '_' +
exptInfo['10. Date and time'] + '_P' + exptInfo['01. Participant Code'],
headers=['trial', 'stimulus', 'speed', 'rating'],
dlgInput=exptInfo)
# ----
# -- SETUP VISUAL INTERFACE INCLUDING VAS --
def start(self, data_folder, mode=u'Демо', test_screen=None):
logging.console.setLevel(logging.WARNING)
log = logging.LogFile('data/' + data_folder + '/' + self.name + '.log',
level=logging.INFO,
filemode='w')
self.init_attr()
# Make output folder
DATA_FILE = 'data/' + data_folder + '/' + self.name + '.csv'
self.data_file = open(DATA_FILE, mode='w')
self.data_file.write(';'.join(self.varnames) + '\n')
self.test_screen = test_screen
self.init_devices()
self.init_instr_stimuli()
self.init_trial_stimuli()
# --------------------------------------------------------------------
# Start the test
# 1. Instruction
self.vars['series'] = 'training'
# We will need this for demonstration
self.training_trials = self.trial_dict.pop('training')
try:
self.start_demonstration()
except FinishTest:
self.exit()
return
self.keys = [x['cor_resp'] for x in self.training_trials]
trials = data.TrialHandler(self.training_trials,
self.nreps,
method='random')
core.wait(1)
maxtrials = self.maxtrain
for trial in trials:
if self.totalN + 1 > maxtrials:
self.status = 'interrupted'
self.exit()
# Run trial
self.trial_seq += 1
self.totalN += 1
self.vars['n'] = self.totalN
self.vars['trial'] = trials.thisN + 1
for i, v in trial.iteritems():
self.vars[i] = v
self.wait(trial)
self.write_data()
# Check status
if self.trial_seq >= self.mintrain:
if float(self.ncorrect) / self.trial_seq >= self.mincorrect:
break
else:
try:
self.check_status()
except FinishTest:
self.exit()
return
logging.flush()
# --------------------------------------------------------------------
# 2. Main series
if mode == u'Демо':
maxtrials = self.ndemo
else:
maxtrials = self.maxtrials
try:
self.instr_stimuli['start_main'].draw()
self.test_screen.flip()
self.suspend(wait=None)
except FinishTest:
self.exit()
return
except GoOn:
pass
for series in self.trial_dict:
self.nfailed = 0
self.invalidstrike = 0
self.ncorrect = 0
self.trial_seq = 0
self.vars['series'] = series
self.keys = [x['cor_resp'] for x in self.trial_dict[series]]
trials = data.TrialHandler(self.trial_dict[series],
self.nreps,
method='random')
core.wait(1)
for trial in trials:
if self.totalN + 1 > maxtrials:
self.status = 'complete'
break
if self.trial_seq >= self.mintrain:
try:
self.check_status()
except FinishTest:
self.exit()
return
# break after breaktrials number of trials
if self.totalN > 0 and (self.totalN % self.breaktrials) == 0:
self.make_a_break(self.breaktime)
self.trial_seq += 1
self.totalN += 1
self.vars['n'] = self.totalN
self.vars['trial'] = trials.thisN + 1
for i, v in trial.iteritems():
self.vars[i] = v
self.wait(trial)
self.write_data()
logging.flush()
else:
self.status = 'complete'
self.exit()
return
#######################
## Factorial design ###
#######################
numResponsesPerTrial = 1 #default. Used to create headers for dataFile
stimList = []
#cuePositions = [dot for dot in range(nDots) if dot not in [0,nDots-1]]
cuePositions = [pos for pos in range(8,17)]
print('cuePositions: ',cuePositions)
#cuePositions = cuePositions[2:(nDots-3)] #drop the first and final two dots
#Set up the factorial design (list of all conditions)
for cuePos in cuePositions:
stimList.append({'cuePos':cuePos})
trials = data.TrialHandler(stimList, nReps = trialsPerCondition) #trialsPerCondition on line 80 so that it's in the setup dialogue box. Change it there to change dialogue box default.
####Create output file###
#########################################################################
dataFile = open(fileNameWithPath + '.txt', 'w')
numResponsesPerTrial = 1
#headers for initial datafile rows, they don't get repeated. These appear in the file in the order they appear here.
oneOffHeaders = [
'subject',
'task',
'staircase',
'trialNum',
'stimulus',
'monitorWidth',