def GetSinglePlotStatistics(self, statisticList):
logger.info("Getting Single Plot Statistics ")
methodString = "-m GetSinglePlotStatistics-1,1"
result = self.SendCommandAndGetResponse(methodString)
if result.Status.HasError():
logger.error(
"Error in Sending Command to get Single Point Statistics")
return result
current = "current : "
voltage = "voltage : "
match = re.findall(current + '(.*?);', result.CmdResult.Output,
re.DOTALL)
if len(match) < 1:
return StatusResult.Error("Could not read Current Value")
# logger.info("Current : " + match[0])
current = match[0]
match = re.findall(voltage + '(.*?);', result.CmdResult.Output,
re.DOTALL)
if len(match) < 1:
return StatusResult.Error("Could not read Voltage Value")
# logger.info("Voltage : " + match[0])
voltage = match[0]
statisticList[0] = current
statisticList[1] = voltage
return StatusResult.Success()
def PingStatus(self, IpAddress):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: PingStatus
# Input: IpAddress
# Description:Pings the machine (with IpAddress provided as an argument)
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
result = CommandLine.RunCommand('ping ' + IpAddress, 30)
if result.Status.HasError():
logger.error("Error in pinging host {0} . {1}".format(
IpAddress, result.CmdResult.Output))
return StatusResult.Error("Error in pinging host {0} . {1}".format(
IpAddress, result.CmdResult.Output))
logger.info(result.CmdResult.Output)
if ('unreachable.' in result.CmdResult.Output):
#No route from the local system. Packets sent were never put on the wire.
return StatusResult.Error('IpAddress is unreacheable. ' +
result.CmdResult.Output)
elif ('Ping request could not find host' in result.CmdResult.Output):
return StatusResult.Error('host_not_found. ' +
result.CmdResult.Output)
elif ('Request timed out.' in result.CmdResult.Output):
return StatusResult.Error('Connection time out' +
result.CmdResult.Output)
return StatusResult.Success()
def CopyUdasLogs(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: CopyUdasLogs
# Input: Takes no argument
# Description: Copy UDAS waveform from Default location to Logs location
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
self.udasDir = TestCaseConfig.ReportsPath + '\\UDAS'
logger.info("UDAS Directory : " + self.udasDir)
logger.info("Copying UDAS waveform from Default location to Logs location")
try :
os.makedirs(self.udasDir)
except OSError :
if not os.path.exists(self.udasDir) :
return StatusResult.Error("Error in creating UDAS Directory on Automation PC : " + self.udasDir)
try:
files = os.listdir(self.logsPath)
for file in files:
shutil.copy(os.path.join(self.logsPath, file), os.path.join(self.udasDir, file))
except Exception as e:
return StatusResult.Error('Failed to copy UDAS waveform : ', str(e))
logger.info("Copying UDAS waveform Completed")
return StatusResult.Success()
def GetAcquisitionError(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: GetAcquisitionError
# Description: Get Acquisition Error if encountered
#-------------------------------------------------------------------------------------------------------------------
"""
logger.info("Getting Acquisition Error")
commandToRun = "GetAcquisitionError()"
result = self.SendCommandAndGetResponse(commandToRun, False)
if result.HasError():
return result
outputs = None
if self.LastApiResponse:
outputs = self.LastApiResponse.split(",")
if (outputs == None or len(outputs) == 0):
return StatusResult.Error(
f"Incorrect response from Kratos while checking for Acquisition errors. Response: {self.LastApiResponse}"
)
if (outputs[0] != "NO ERROR"):
return StatusResult.Error(
f"Error response from Kratos while checking for Acquisition errors. Response: {self.LastApiResponse}"
)
return StatusResult.Success()
def startsystem(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: startsystem
# Description: Start the system with the previously deployed template
# Input: Takes no argument
# Examples:
# startsystem()
# It will start TBSLTE sytem with the previously deployed template
# and check if system is running at end
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if not self._get_tbslteutil_handle():
return StatusResult.Error("TBSLTEUtil handle not initialized")
try:
output = self._tbslte_handle.start_system()
except Exception as e:
return StatusResult.Error(
f"TBSLTEUtil threw an exception while starting the system: {e}"
)
if output == 0:
return StatusResult.Error("Failed to start the TBS system")
elif output == 2:
logger.debug(
"TBSLTE system was already running before calling the 'startsystem' function"
)
logger.info("TBSLTE system is up and running")
return StatusResult.Success()
def stopsystem(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: stopsystem
# Description: Stop the TBSLTE system and check system is in stopped mode at end
# Input: Takes no argument
# Examples:
# stopsystem()
# It will stop TBSLTE sytem
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if not self._get_tbslteutil_handle():
return StatusResult.Error("TBSLTEUtil handle not initialized")
try:
output = self._tbslte_handle.stop_system()
except Exception as e:
return StatusResult.Error(
f"TBSLTEUtil threw an exception while stopping the system: {e}"
)
if output == 0:
return StatusResult.Error("Failed to stop the TBS system")
elif output == 2:
logger.debug(
"TBSLTE system was already stopped before calling the 'stopsystem' function"
)
logger.info("TBSLTE system is stopped successfully")
return StatusResult.Success()
def sendtbsltecomponentrawcommand(self, **kwargs):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: sendtbsltecomponentrawcommand
# Description: This function allow user access any tbslte component module raw function directly
# Input: Takes argument :
# component_name (:class:`str`): : Required: Component name
# tbslte.BMSC, tbslte.GW, tbslte.MME, tbslte.ENB, tbslte.CELL
# componet_index (:class:`str`): : Required: Value can be 'all'
# component or component index
# method (:class:`str`): None: Required:TBS raw API, please use
# go/tbsltedoc https://qct-artifactory.qualcomm.com/artifactory
# /tbs-content-browsing-local/sphinx_docs.zip!/sphinx_docs/index.html for API detail
# inputs (:class:`list`): : Required: TBS component raw API input
# parameters. It supports multiple parameters
# Example:
# sendtbsltecomponentrawcommand({component_name='CELL', componet_index='all', method='set_mimo_ior',inputs=-50 })
# Send set_mimo_ior input -50 in all Panda Cell
# sendtbsltecomponentrawcommand({component_name='CELL',componet_index= 'all', method= 'get_mimo_ior'})
# Send get_mimo_ior input None in all Panda Cell
# sendtbsltecomponentrawcommand({component_name='CELL',componet_index= '1',method= 'get_mimo_ior'})
# Send get_mimo_ior input None in all Panda Cell index 1
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if not self._get_tbslteutil_handle():
return StatusResult.Error("TBSLTEUtil handle not initialized")
try:
component_name = kwargs.get('component_name')
componet_index = kwargs.get('componet_index')
method = kwargs.get('method')
inputs = kwargs.get('inputs')
output = self._tbslte_handle.tbslte_component_dispatcher(
component_name, component_index, method, inputs)
except Exception as e:
return StatusResult.Error(
f"TBSLTEUtil threw an exception during tbslte_component_dispatcher: {e}"
)
if not output:
return StatusResult.Error(
f"Failed to run sendtbsltecomponentrawcommand for the input: {json.dumps(kwargs)}"
)
logger.info(
f"Successful in running sendtbsltecomponentrawcommand for the input: {json.dumps(kwargs)}"
)
return StatusResult.Success()
def StartMeasurement(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: StartMeasurement
# Input: Takes no argument
# Description: Starts power measurement on ALPACA
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if self.boardHasEpm:
if self.epm.getData:
logger.warning('ALPACA : Measurement already running. Stopping previous measurement')
result = self.StopMeasurement()
if result.HasError():
logger.error('ALPACA : Error stopping previous measurement')
return result
logger.info('ALPACA : Starting measurement')
try:
self.epm.StartMeasurement()
except Exception as e:
logger.error(str(e))
return StatusResult.Error('ALPACA : ', str(e))
return StatusResult.Success()
def SetDataCollectionPath(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: SetDataCollectionPath
# Input: Takes no argument
# Description: Sets up path to save UDAS waveform on automation PC
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
logger.info("Setting Logs Location for saving UDAS")
if self.boardHasEpm:
if self.epm.getData:
logger.warning('ALPACA : Measurement already running. Stopping previous measurement')
result = self.StopMeasurement()
if result.HasError():
logger.error('ALPACA : Error stopping previous measurement')
return result
self.logsPath = "C:\\Automation\\Logs\\" + str(datetime.now().strftime('%Y-%m-%d_%H-%M-%S'))
if self.boardHasEpm:
try:
logger.info('ALPACA : Log directory path : ' + self.logsPath)
self.epm.SetLogDirectory(self.logsPath)
except Exception as e:
logger.error(str(e))
return StatusResult.Error('ALPACA : ', str(e))
return StatusResult.Success()
def GetSinglePlotStatistics(self, statisticList):
logger.info("Getting Single Plot Statistics ")
for channel in ['CURRENT', 'VOLTAGE']:
commandToRun = f"GetSinglePlotStatistics(0,{channel})"
result = self.SendCommandAndGetResponse(commandToRun)
if result.HasError():
logger.error(f"Error in reading battery {channel}")
return result
dataFields = None
if self.LastApiResponse:
dataFields = self.LastApiResponse.split(",")
if (dataFields == None or len(dataFields) < 3):
return StatusResult.Error(
f"Kratos: Failed to parse response while reading battery {channel} value. Response: {self.LastApiResponse}"
)
if channel == 'CURRENT':
statisticList[0] = dataFields[2]
else:
statisticList[1] = dataFields[2]
return StatusResult.Success()
def StartAcquisition(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: StartAcquisition
# Description: Starts Acquisition on Kratos
#-------------------------------------------------------------------------------------------------------------------
"""
logger.info("Starting Acquisition")
commandToRun = "StartAcquisition()"
result = self.SendCommandAndGetResponse(commandToRun, False)
if (result.HasError()):
return result
status = KratosConstants.ExtAcquisitionStatus.UNKNOWN
logger.info("Kratos: Waiting For Acquisition To Be Ready")
# Wait for up to 60seconds for the waiting for trigger screen
startTime = datetime.datetime.now()
while (status !=
KratosConstants.ExtAcquisitionStatus.WAITING_FOR_TRIGGER
and (datetime.datetime.now() - startTime).seconds < 60):
time.sleep(2)
status = self.GetExtAcquisitionStatus()
if (status !=
KratosConstants.ExtAcquisitionStatus.WAITING_FOR_TRIGGER):
return StatusResult.Error(
"Kratos: Acquisition Is Not Ready. Check That A Measurement Can Be Performed Manually"
)
return StatusResult.Success()
def SetupServerIperf(port, throughput):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: SetupServerIperf
# Input: Takes two arguments
# argument1: port
# argument2: throughput
# Description: Function used start iPerf Server
# Return: StatusResult result
#-------------------------------------------------------------------------------------------------------------------
"""
logger.info("Calling SetupServerIperf function")
logger.info("TBS: Starting Iperf Server")
command = TbsIPerfActions.plinkstr + "iperf -s -p " + str(
port) + " -u -i2 -w " + str(throughput) + "M "
logger.info("TBS: " + str(command))
try:
logger.info("Creating iPerfServer Thread")
iPerfServerThread = Thread(target=CommandLine.RunCommand,
args=[command, 15])
logger.info("Staring iPerfServer Thread")
iPerfServerThread.start()
except Exception as e:
logger.error("Exception raised from SetupServerIperf function: " +
str(e))
return StatusResult.Error(
"Exception raised from SetupServerIperf function: " + str(e))
time.sleep(10)
logger.info("SetupServerIperf function worked fine")
return StatusResult.Success()
def sendtestabilitycommandonltetbs(self, **kwargs):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: sendtestabilitycommandonltetbs
# Description: Sends testability command to tbslte station
# Input: Takes argument :
# command (:class:`str`): : Required: The testability command to execute
# Example:
# sendtestabilitycommandonltetbs({command="MME COMMAND GET MME_QUERY_STATE"})
# Send testability command MME COMMAND GET MME_QUERY_STATE to
# the TBSLTE station
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if not self._get_tbslteutil_handle():
return StatusResult.Error("TBSLTEUtil handle not initialized")
try:
command = kwargs.get('command')
output = self._tbslte_handle.send_testability_command(command)
except Exception as e:
return StatusResult.Error(
f"TBSLTEUtil threw an exception while sending testability command to tbslte station: {e}"
)
if output is None:
return StatusResult.Error(
'Sending testability command failed, returned None')
else:
# TBSLTE returns dict include request_status.
result_hash = str(command).split(' ')[0] + '_STATUS'
if (result_hash in output.keys()
and 'REQUEST_STATUS' in output[result_hash].keys()
and output[result_hash]['REQUEST_STATUS']['ERROR'] == 0
and output[result_hash]['REQUEST_STATUS']['CAUSE']
== 'SUCCESS'):
logger.info(
"Successful in sending testability command to TBSLTE system"
)
else:
return StatusResult.Error(
f'Sending testability command failed, returned output: {json.dumps(output)}'
)
return StatusResult.Success()
def CheckCalibrationStatus(self, calibrationStatusList):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: CheckCalibrationStatus
# Description: Checks Status of Self Calibration, DMM Calibration & External Calibration
#-------------------------------------------------------------------------------------------------------------------
"""
logger.info("Checking Calibration")
methodString = "-m CheckCalibrationStatus-false,false,false"
result = self.SendCommandAndGetResponse(methodString)
if result.Status.HasError():
logger.error(
"Error in Sending Command to get Single Point Statistics")
return result
selfCalibrationStatus = "selfCalOk : "
dmmCalibrationStatus = "dmmCalOk : "
externalCalibrationStatus = "extCalOk : "
match = re.findall(selfCalibrationStatus + '(.*?);',
result.CmdResult.Output, re.DOTALL)
if len(match) < 1:
return StatusResult.Error("Could not read Self Calibration Status")
selfCalibrationStatus = match[0]
match = re.findall(dmmCalibrationStatus + '(.*?);',
result.CmdResult.Output, re.DOTALL)
if len(match) < 1:
return StatusResult.Error("Could not read DMM Calibration Status")
dmmCalibrationStatus = match[0]
match = re.findall(externalCalibrationStatus + '(.*?);',
result.CmdResult.Output, re.DOTALL)
if len(match) < 1:
return StatusResult.Error(
"Could not read External Calibration Status")
externalCalibrationStatus = match[0]
calibrationStatusList.append(selfCalibrationStatus)
calibrationStatusList.append(dmmCalibrationStatus)
calibrationStatusList.append(externalCalibrationStatus)
return result
def setadditionalcablelost(self, **kwargs):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: setadditionalcablelost
# Description: Set additional cable loss value for either downlink or uplink
# Input: Takes argument :
# link (:class:`str`): : Required: UPLINK or DOWNLINK
# lost (:class:`float`): : Required: Loss in db to write at given antenna indices
# antenna (:class:`int`): : Optional: Antenna at which the loss value is read
# cell (:class:`int`): 0: Optional: Index of cell of base station
# Example:
# setadditionalcablelost({link:'downlink', lost: 25.0})
# Set downlink additional 25db cable lost on cell 0 all antenna
# setadditionalcablelost({link : 'uplink', lost: 20.0, antenna : 1, cell:1})
# Set uplink additional 20db cable lost on cell 1 antenna 1
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if not self._get_tbslteutil_handle():
return StatusResult.Error("TBSLTEUtil handle not initialized")
try:
link = kwargs.get('link')
lost = kwargs.get('lost')
antenna = kwargs.get('antenna')
cell = kwargs.get('cell')
output = self._tbslte_handle.set_cable_loss(
link, lost, antenna, cell)
except Exception as e:
return StatusResult.Error(
f"TBSLTEUtil threw an exception while setting cable losses: {e}"
)
if not output:
return StatusResult.Error(
f"Setting additional cable losses failed for the input: {json.dumps(kwargs)}"
)
logger.info(
f"Setting additional cable losses successful for the input: {json.dumps(kwargs)}"
)
return StatusResult.Success()
def configuretemplateonltetbs(self, **kwargs):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: configuretemplateonltetbs
# Description: configure template for ltetbs
# Input: Takes argument :
# template_path (:class:`str`): : Required: The TBS server accessible
# template file path. The template will be deployed to the system
# regardless of its current state
# Examples:
# configuretemplateonltetbs({template_path: '/prj/qct/octopus/test/templates/Golden/LabOps/Wildcat_v27/BC01_EPN_4cell_20MHz_XOR_CAT11.xml'})
# It will configure and load /prj/qct/octopus/test/templates/Golden/LabOps/Wildcat_v27/BC01_EPN_4cell_20MHz_XOR_CAT11.xml
# in tbslte station template and run system, make sure system running
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if not self._get_tbslteutil_handle():
return StatusResult.Error(f"TBSLTEUtil handle not initialized")
try:
template_path = kwargs.get('template_path')
logger.debug(
f"Deploying template {template_path} on TBSLTE station {self._host_id}"
)
output = self._tbslte_handle.deploy_template(template_path)
except Exception as e:
return StatusResult.Error(
f"TBSLTEUtil threw an exception while deploying the template: {e}"
)
if not output:
return StatusResult.Error(
f"Failed to deploy template {template_path}")
logger.info(
f"Template {template_path} is deployed successful and LTETBS is running"
)
return StatusResult.Success()
def SetConfigurationFile(self, configFile):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: SetConfigurationFile
# Input: Takes one argument
# configFile: json config filename for ALPACA
# Description: Sets up configuration for ALPACA card
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
logger.info("Loading ALPACA Configuration : " + configFile)
if not configFile.endswith('.json'):
return StatusResult.Error('ALPACA : ', 'Incorrect Configuration file for ALPACA, JSON file needed')
configFile = CommonApplicationUtilities._ResourcesConfigFilePath + '\\Alpaca\\' + configFile
if self.boardHasEpm:
if self.epm.getData:
logger.warning('ALPACA : Measurement already running. Stopping previous measurement')
result = self.StopMeasurement()
if result.HasError():
logger.error('ALPACA : Error while stopping previous measurement')
return result
if not os.path.exists(configFile):
return StatusResult.Error('ALPACA : ', 'Configuration file not found')
if self.boardHasEpm:
try:
self.epm.SetConfigFile(configFile)
except Exception as e:
logger.error(str(e))
return StatusResult.Error('ALPACA : ', str(e))
return StatusResult.Success()
def sendtbslterawcommand(self, **kwargs):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: sendtbslterawcommand
# Description: This function allow user access any tbslte module raw function directly
# Input: Takes argument :
# method (:class:`str`) : : Required: An ltetbs function name
# inputs (:class:`list`) : : Required: tbslte input parameters
# Example:
# sendtbslterawcommand({command: 'testability_command', inputs: ['MME COMMAND GET MME_QUERY_STATE']})
# Send testability_command input : MME COMMAND GET MME_QUERY_STATE' to tbslte station
# sendtbslterawcommand({command: 'start_system'})
# Send start_system input : None to tbslte station
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if not self._get_tbslteutil_handle():
return StatusResult.Error("TBSLTEUtil handle not initialized")
try:
method = kwargs.get('method')
inputs = kwargs.get('inputs')
output = self._tbslte_handle.tbslte_dispatcher(method, inputs)
except Exception as e:
return StatusResult.Error(
f"TBSLTEUtil threw an exception while trying to run the command {method} with input {inputs}: {e}"
)
if not output:
return StatusResult.Error(
f"Failed to run sendtbslterawcommand for the input: {json.dumps(kwargs)}"
)
logger.info(
f"Successful in running sendtbslterawcommand for the input: {json.dumps(kwargs)}"
)
return StatusResult.Success()
def GetTECComPort():
"""
-------------------------------------------------------------------------------------------------------------------
Name: GetTECComPort
Input: Takes no argument
Description: Get the COM port number for TEC
Return: StatusResult() object
-------------------------------------------------------------------------------------------------------------------
"""
port = WindowsComPort.GetComPort('prolific usb-to-serial comm port')
if not port:
return StatusResult.Error('TEC not detected!')
logger.info("The COM port of the TEC is " + port.device)
return StatusResult.Success()
def setpandaioronltetbs(self, **kwargs):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: setpandaioronltetbs
# Description: Set panda ior on tbslte station all cells all transmitters all receivers
# Input: Takes argument :
# ior (:class:`float`): : Required: PowerDbm value to set at a given
# tx/rx index for a given cell
# Example:
# setpandaioronltetbs({ior=-25.5})
# Set panda all cells all transmitters all receivers ior to -25.5
# setpandaioronltetbs({ior=0.0})
# Set panda all cells all transmitters all receivers ior to 0
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if not self._get_tbslteutil_handle():
return StatusResult.Error("TBSLTEUtil handle not initialized")
try:
ior = kwargs.get('ior')
output = self._tbslte_handle.set_ior_on_cells(ior)
except Exception as e:
return StatusResult.Error(
f"TBSLTEUtil threw an exception while setting Ior on cells: {e}"
)
if not output:
return StatusResult.Error(
f"Setting Ior to {ior} failed on all cells for all transmitters, all receivers"
)
logger.info(
f"Setting Ior to {ior} successful on all cells for all transmitters, all receivers"
)
return StatusResult.Success()
def ActivateBSECell(self):
try:
logger.info("Activating BSE Cell")
result = self.SendCommandAndGetResponse(
"-m ActivateBSECell-" + self.address + "," +
UxmCallBoxHandler.protocolType)
if result.Status.HasError():
return result
'''
Logic to check if the operation performed is successfull
It could be parsing the obtained console log
'''
except Exception as ex:
return StatusResult.Error("Failed To De Register UE From IMS : " +
str(ex))
return StatusResult.Success()
def initialize_handler(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: initialize_handler
# Description: Create TBSLTEUtility handle and connect to Qualcomm LTE(4G) Test Base Station based on key tbslte_host_id
# Input: Takes no argument
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
self._host_id = TestSuiteConfig.TbsLteHostId
if self._host_id is None:
return StatusResult.Error("TbsLteHostId is not provisioned")
logger.debug(
f"TBSLTE Host ID {self._host_id} obtained from input XML key TbsLteHostId"
)
return StatusResult.Success()
def UsbOn(self):
"""
-------------------------------------------------------------------------------------------------------------------
Name: UsbOn
Input: Takes no argument
Description: Enables USB
Return: StatusResult() object
-------------------------------------------------------------------------------------------------------------------
"""
logger.info("Spiderboard: USB On")
result = self.ExecuteCommand(SpiderBoard.usbOn)
if result.HasError():
logger.error(result.ErrorMessage())
return StatusResult.Error("USB on with the Spiderboard failed! " +
result.ErrorMessage())
return StatusResult.Success()
def Relay2Off(self):
"""
-------------------------------------------------------------------------------------------------------------------
Name: Relay2Off
Input: Takes no argument
Description: Disables Relay2
Return: StatusResult() object
-------------------------------------------------------------------------------------------------------------------
"""
logger.info("Spiderboard: Relay2 Off")
result = self.ExecuteCommand(SpiderBoard.relay2Off)
if result.HasError():
logger.error(result.ErrorMessage())
return StatusResult.Error(
"Relay2 off with the Spiderboard failed! " +
result.ErrorMessage())
return StatusResult.Success()
def RecallAgilentUXMRegister(self, register):
try:
logger.info("Recalling Agilent UXM Register : " + register)
print("Recalling Agilent UXM Register : " + register)
result = self.SendCommandAndGetResponse(
"-m RecallAgilentUXMRegister-" + self.address + "," +
register + "," + UxmCallBoxHandler.protocolType)
if result.Status.HasError():
return result
'''
Logic to check if the operation performed is successfull
It could be parsing the obtained console log
'''
except Exception as ex:
return StatusResult.Error("Failed To De Register UE From IMS : " +
str(ex))
return StatusResult.Success()
def initialize_scenario(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: initialize_scenario
# Description: Initialize instance variables for a single scenario
# Input: Takes no argument
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if self._tbslte_handle is None:
try:
self._tbslte_handle = TBSLTEUtil(self._host_id)
except Exception as e:
logger.error(
'Failed to initialize TBS module. Please make sure your TBS is running on Octopus 96 or above'
)
return StatusResult.Error(
f'Failed to create TBSLTEUtil object. Error: {e}')
return StatusResult.Success()
def ReleaseTacPort(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: ReleaseTacPort
# Input: Takes no argument
# Description: close TAC port
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
if self.boardHasTac and hasattr(self.tac, 'ser'):
try:
logger.debug('Releasing TAC port')
self.tac.ser.close()
except Exception as e:
logger.error('Failed to close TAC port')
logger.error(str(e))
return StatusResult.Error('Failed to close TAC port : ', str(e))
return StatusResult.Success()
def UsbOff(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: UsbOff
# Input: Takes no argument
# Description: Disable USB on ALPACA
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
logger.info('ALPACA: USB OFF')
if self.boardHasTac:
try:
self.tac.DisconnectUsb()
except Exception as e:
logger.error(str(e))
return StatusResult.Error('ALPACA : ', str(e))
return StatusResult.Success()
def PowerOn(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: PowerOn
# Input: Takes no argument
# Description: Power On ALPACA card
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
logger.info("ALPACA: Power ON");
if self.boardHasTac:
try:
self.tac.On()
except Exception as e:
logger.error(str(e))
return StatusResult.Error('ALPACA : ', str(e))
return StatusResult.Success()
def EdlSwitchOff(self):
"""
#-------------------------------------------------------------------------------------------------------------------
# Name: EdlSwitchOff
# Input: Takes no argument
# Description: Switch OFF EDL on ALPACA card
# Return: StatusResult() object
#-------------------------------------------------------------------------------------------------------------------
"""
logger.info('ALPACA: EDL switch off')
if self.boardHasTac:
try:
self.tac._write('edl', 0)
except Exception as e:
logger.error(str(e))
return StatusResult.Error('ALPACA : ', str(e))
return StatusResult.Success()
