def __init__(self, parent=None):
super(OpenClDeviceDialog, self).__init__(parent)
filename = get_ui_file("opencl-device-dialog.ui")
qt.loadUi(filename, self)
self.__availableIds = {}
model = self.__createModel()
self._deviceView.setModel(model)
self._deviceView.setSelectionMode(qt.QAbstractItemView.SingleSelection)
self._deviceView.setSelectionBehavior(qt.QAbstractItemView.SelectRows)
header = self._deviceView.horizontalHeader()
if qt.qVersion() < "5.0":
header.setClickable(True)
header.setMovable(True)
header.setSectionResizeMode = self.setResizeMode
else:
header.setSectionsClickable(True)
header.setSectionsMovable(True)
header.setStretchLastSection(False)
header.setSectionResizeMode(0, qt.QHeaderView.Stretch)
header.setSectionResizeMode(1, qt.QHeaderView.Interactive)
header.setSectionResizeMode(2, qt.QHeaderView.ResizeToContents)
header.setSectionResizeMode(3, qt.QHeaderView.ResizeToContents)
header.setSectionResizeMode(4, qt.QHeaderView.ResizeToContents)
self._buttonBox.accepted.connect(self.accept)
self._buttonBox.rejected.connect(self.reject)
self._group = qt.QButtonGroup(self)
self._group.setExclusive(True)
self._group.addButton(self._anyDeviceButton)
self._group.addButton(self._anyGpuButton)
self._group.addButton(self._anyCpuButton)
self._group.addButton(self._availableButton)
self._group.addButton(self._customButton)
self._group.buttonClicked.connect(self.__modeChanged)
self._anyDeviceButton.setChecked(True)
self.__modeChanged()
if pyopencl is None:
self._availableButton.setEnabled(False)
self._availableButton.setToolTip(
"PyOpenCL have to be installed to display available devices.")
def __init__(self, parent=None):
super(GeometryDialog, self).__init__(parent)
filename = get_ui_file("geometry-dialog.ui")
qt.loadUi(filename, self)
self.__geometry = GeometryModel()
self.__fit2dGeometry = Fit2dGeometryModel()
self.__detector = None
self.__originalGeometry = None
self.__updatingModel = False
# Connect buttons
self._buttonBox.rejected.connect(self.reject)
self._buttonBox.accepted.connect(self.accept)
# Create shared units
angleUnit = DataModel()
angleUnit.setValue(units.Unit.RADIAN)
lengthUnit = DataModel()
lengthUnit.setValue(units.Unit.METER)
pixelUnit = DataModel()
pixelUnit.setValue(units.Unit.PIXEL)
# Connect pyFAI widgets to units
self._pyfaiDistance.setDisplayedUnitModel(lengthUnit)
self._pyfaiDistance.setModelUnit(units.Unit.METER)
self._pyfaiDistanceUnit.setUnitModel(lengthUnit)
self._pyfaiDistanceUnit.setUnitEditable(True)
self._pyfaiPoni1.setDisplayedUnitModel(lengthUnit)
self._pyfaiPoni1.setModelUnit(units.Unit.METER)
self._pyfaiPoni1Unit.setUnitModel(lengthUnit)
self._pyfaiPoni1Unit.setUnitEditable(True)
self._pyfaiPoni2.setDisplayedUnitModel(lengthUnit)
self._pyfaiPoni2.setModelUnit(units.Unit.METER)
self._pyfaiPoni2Unit.setUnitModel(lengthUnit)
self._pyfaiPoni2Unit.setUnitEditable(True)
self._pyfaiRotation1.setDisplayedUnitModel(angleUnit)
self._pyfaiRotation1.setModelUnit(units.Unit.RADIAN)
self._pyfaiRotation1Unit.setUnitModel(angleUnit)
self._pyfaiRotation1Unit.setUnitEditable(True)
self._pyfaiRotation2.setDisplayedUnitModel(angleUnit)
self._pyfaiRotation2.setModelUnit(units.Unit.RADIAN)
self._pyfaiRotation2Unit.setUnitModel(angleUnit)
self._pyfaiRotation2Unit.setUnitEditable(True)
self._pyfaiRotation3.setDisplayedUnitModel(angleUnit)
self._pyfaiRotation3.setModelUnit(units.Unit.RADIAN)
self._pyfaiRotation3Unit.setUnitModel(angleUnit)
self._pyfaiRotation3Unit.setUnitEditable(True)
# Connect fit2d widgets to units
self._fit2dDistance.setDisplayedUnitModel(lengthUnit)
self._fit2dDistance.setModelUnit(units.Unit.MILLIMETER)
self._fit2dDistanceUnit.setUnit(units.Unit.MILLIMETER)
# self._fit2dDistanceUnit.setUnitModel(lengthUnit)
# self._fit2dDistanceUnit.setUnitEditable(True)
self._fit2dCenterX.setDisplayedUnitModel(pixelUnit)
self._fit2dCenterX.setModelUnit(units.Unit.PIXEL)
self._fit2dCenterXUnit.setUnit(units.Unit.PIXEL)
# self._fit2dCenterXUnit.setUnitModel(pixelUnit)
# self._fit2dCenterXUnit.setUnitEditable(True)
self._fit2dCenterY.setDisplayedUnitModel(pixelUnit)
self._fit2dCenterY.setModelUnit(units.Unit.PIXEL)
self._fit2dCenterYUnit.setUnit(units.Unit.PIXEL)
# self._fit2dCenterYUnit.setUnitModel(pixelUnit)
# self._fit2dCenterYUnit.setUnitEditable(True)
self._fit2dTilt.setDisplayedUnitModel(angleUnit)
self._fit2dTilt.setModelUnit(units.Unit.DEGREE)
self._fit2dTiltUnit.setUnit(units.Unit.DEGREE)
# self._fit2dTiltUnit.setUnitModel(angleUnit)
# self._fit2dTiltUnit.setUnitEditable(True)
self._fit2dTiltPlan.setDisplayedUnitModel(angleUnit)
self._fit2dTiltPlan.setModelUnit(units.Unit.DEGREE)
self._fit2dTiltPlanUnit.setUnit(units.Unit.DEGREE)
# self._fit2dTiltPlanUnit.setUnitModel(angleUnit)
# self._fit2dTiltPlanUnit.setUnitEditable(True)
# Connect fit2d model-widget
self._fit2dDistance.setModel(self.__fit2dGeometry.distance())
self._fit2dCenterX.setModel(self.__fit2dGeometry.centerX())
self._fit2dCenterY.setModel(self.__fit2dGeometry.centerY())
self._fit2dTilt.setModel(self.__fit2dGeometry.tilt())
self._fit2dTiltPlan.setModel(self.__fit2dGeometry.tiltPlan())
self._pyfaiDistance.setModel(self.__geometry.distance())
self._pyfaiPoni1.setModel(self.__geometry.poni1())
self._pyfaiPoni2.setModel(self.__geometry.poni2())
self._pyfaiRotation1.setModel(self.__geometry.rotation1())
self._pyfaiRotation2.setModel(self.__geometry.rotation2())
self._pyfaiRotation3.setModel(self.__geometry.rotation3())
self.__geometry.changed.connect(self.__updateFit2dFromPyfai)
self.__fit2dGeometry.changed.connect(self.__updatePyfaiFromFit2d)
self.__geometry.changed.connect(self.__updateButtons)
# NOTE: All the buttons have to be create here.
# Changing available buttons on the focus event create a segfault
types = (qt.QDialogButtonBox.Ok | qt.QDialogButtonBox.Cancel |
qt.QDialogButtonBox.Reset | qt.QDialogButtonBox.Close)
self._buttonBox.setStandardButtons(types)
resetButton = self._buttonBox.button(qt.QDialogButtonBox.Reset)
resetButton.clicked.connect(self.__resetToOriginalGeometry)
self.__updateButtons()
def __init__(self, parent=None):
super(GeometryDialog, self).__init__(parent)
filename = get_ui_file("geometry-dialog.ui")
qt.loadUi(filename, self)
self.__geometry = None
self.__detector = None
# Connect close button
self._buttonBox.rejected.connect(self.reject)
# Create shared units
angleUnit = DataModel()
angleUnit.setValue(units.Unit.RADIAN)
lengthUnit = DataModel()
lengthUnit.setValue(units.Unit.METER)
pixelUnit = DataModel()
pixelUnit.setValue(units.Unit.PIXEL)
# Connect pyFAI widgets to units
self._pyfaiDistance.setDisplayedUnitModel(lengthUnit)
self._pyfaiDistance.setModelUnit(units.Unit.METER)
self._pyfaiDistanceUnit.setUnitModel(lengthUnit)
self._pyfaiDistanceUnit.setUnitEditable(True)
self._pyfaiPoni1.setDisplayedUnitModel(lengthUnit)
self._pyfaiPoni1.setModelUnit(units.Unit.METER)
self._pyfaiPoni1Unit.setUnitModel(lengthUnit)
self._pyfaiPoni1Unit.setUnitEditable(True)
self._pyfaiPoni2.setDisplayedUnitModel(lengthUnit)
self._pyfaiPoni2.setModelUnit(units.Unit.METER)
self._pyfaiPoni2Unit.setUnitModel(lengthUnit)
self._pyfaiPoni2Unit.setUnitEditable(True)
self._pyfaiRotation1.setDisplayedUnitModel(angleUnit)
self._pyfaiRotation1.setModelUnit(units.Unit.RADIAN)
self._pyfaiRotation1Unit.setUnitModel(angleUnit)
self._pyfaiRotation1Unit.setUnitEditable(True)
self._pyfaiRotation2.setDisplayedUnitModel(angleUnit)
self._pyfaiRotation2.setModelUnit(units.Unit.RADIAN)
self._pyfaiRotation2Unit.setUnitModel(angleUnit)
self._pyfaiRotation2Unit.setUnitEditable(True)
self._pyfaiRotation3.setDisplayedUnitModel(angleUnit)
self._pyfaiRotation3.setModelUnit(units.Unit.RADIAN)
self._pyfaiRotation3Unit.setUnitModel(angleUnit)
self._pyfaiRotation3Unit.setUnitEditable(True)
# Connect fit2d widgets to units
self._fit2dDistance.setDisplayedUnitModel(lengthUnit)
self._fit2dDistance.setModelUnit(units.Unit.MILLIMETER)
self._fit2dDistanceUnit.setUnit(units.Unit.MILLIMETER)
# self._fit2dDistanceUnit.setUnitModel(lengthUnit)
# self._fit2dDistanceUnit.setUnitEditable(True)
self._fit2dCenterX.setDisplayedUnitModel(pixelUnit)
self._fit2dCenterX.setModelUnit(units.Unit.PIXEL)
self._fit2dCenterXUnit.setUnit(units.Unit.PIXEL)
# self._fit2dCenterXUnit.setUnitModel(pixelUnit)
# self._fit2dCenterXUnit.setUnitEditable(True)
self._fit2dCenterY.setDisplayedUnitModel(pixelUnit)
self._fit2dCenterY.setModelUnit(units.Unit.PIXEL)
self._fit2dCenterYUnit.setUnit(units.Unit.PIXEL)
# self._fit2dCenterYUnit.setUnitModel(pixelUnit)
# self._fit2dCenterYUnit.setUnitEditable(True)
self._fit2dTilt.setDisplayedUnitModel(angleUnit)
self._fit2dTilt.setModelUnit(units.Unit.DEGREE)
self._fit2dTiltUnit.setUnit(units.Unit.DEGREE)
# self._fit2dTiltUnit.setUnitModel(angleUnit)
# self._fit2dTiltUnit.setUnitEditable(True)
self._fit2dTiltPlan.setDisplayedUnitModel(angleUnit)
self._fit2dTiltPlan.setModelUnit(units.Unit.DEGREE)
self._fit2dTiltPlanUnit.setUnit(units.Unit.DEGREE)
# self._fit2dTiltPlanUnit.setUnitModel(angleUnit)
# self._fit2dTiltPlanUnit.setUnitEditable(True)
# Connect fit2d model-widget
self.__fit2dDistance = DataModel()
self.__fit2dCenterX = DataModel()
self.__fit2dCenterY = DataModel()
self.__fit2dTilt = DataModel()
self.__fit2dTiltPlan = DataModel()
self._fit2dDistance.setModel(self.__fit2dDistance)
self._fit2dCenterX.setModel(self.__fit2dCenterX)
self._fit2dCenterY.setModel(self.__fit2dCenterY)
self._fit2dTilt.setModel(self.__fit2dTilt)
self._fit2dTiltPlan.setModel(self.__fit2dTiltPlan)
def __init__(self, parent=None):
super(GeometryDialog, self).__init__(parent)
filename = get_ui_file("geometry-dialog.ui")
qt.loadUi(filename, self)
self.__geometry = GeometryModel()
self.__fit2dGeometry = Fit2dGeometryModel()
self.__detector = None
self.__originalGeometry = None
self.__updatingModel = False
# Connect buttons
self._buttonBox.rejected.connect(self.reject)
self._buttonBox.accepted.connect(self.accept)
# Create shared units
angleUnit = DataModel()
angleUnit.setValue(units.Unit.RADIAN)
lengthUnit = DataModel()
lengthUnit.setValue(units.Unit.METER)
pixelUnit = DataModel()
pixelUnit.setValue(units.Unit.PIXEL)
# Connect pyFAI widgets to units
self._pyfaiDistance.setDisplayedUnitModel(lengthUnit)
self._pyfaiDistance.setModelUnit(units.Unit.METER)
self._pyfaiDistanceUnit.setUnitModel(lengthUnit)
self._pyfaiDistanceUnit.setUnitEditable(True)
self._pyfaiPoni1.setDisplayedUnitModel(lengthUnit)
self._pyfaiPoni1.setModelUnit(units.Unit.METER)
self._pyfaiPoni1Unit.setUnitModel(lengthUnit)
self._pyfaiPoni1Unit.setUnitEditable(True)
self._pyfaiPoni2.setDisplayedUnitModel(lengthUnit)
self._pyfaiPoni2.setModelUnit(units.Unit.METER)
self._pyfaiPoni2Unit.setUnitModel(lengthUnit)
self._pyfaiPoni2Unit.setUnitEditable(True)
self._pyfaiRotation1.setDisplayedUnitModel(angleUnit)
self._pyfaiRotation1.setModelUnit(units.Unit.RADIAN)
self._pyfaiRotation1Unit.setUnitModel(angleUnit)
self._pyfaiRotation1Unit.setUnitEditable(True)
self._pyfaiRotation2.setDisplayedUnitModel(angleUnit)
self._pyfaiRotation2.setModelUnit(units.Unit.RADIAN)
self._pyfaiRotation2Unit.setUnitModel(angleUnit)
self._pyfaiRotation2Unit.setUnitEditable(True)
self._pyfaiRotation3.setDisplayedUnitModel(angleUnit)
self._pyfaiRotation3.setModelUnit(units.Unit.RADIAN)
self._pyfaiRotation3Unit.setUnitModel(angleUnit)
self._pyfaiRotation3Unit.setUnitEditable(True)
# Connect fit2d widgets to units
self._fit2dDistance.setDisplayedUnit(units.Unit.MILLIMETER)
self._fit2dDistance.setModelUnit(units.Unit.MILLIMETER)
self._fit2dDistanceUnit.setUnit(units.Unit.MILLIMETER)
self._fit2dCenterX.setDisplayedUnitModel(pixelUnit)
self._fit2dCenterX.setModelUnit(units.Unit.PIXEL)
self._fit2dCenterXUnit.setUnit(units.Unit.PIXEL)
self._fit2dCenterY.setDisplayedUnitModel(pixelUnit)
self._fit2dCenterY.setModelUnit(units.Unit.PIXEL)
self._fit2dCenterYUnit.setUnit(units.Unit.PIXEL)
self._fit2dTilt.setDisplayedUnit(units.Unit.DEGREE)
self._fit2dTilt.setModelUnit(units.Unit.DEGREE)
self._fit2dTiltUnit.setUnit(units.Unit.DEGREE)
self._fit2dTiltPlan.setDisplayedUnit(units.Unit.DEGREE)
self._fit2dTiltPlan.setModelUnit(units.Unit.DEGREE)
self._fit2dTiltPlanUnit.setUnit(units.Unit.DEGREE)
# Connect fit2d model-widget
self._fit2dDistance.setModel(self.__fit2dGeometry.distance())
self._fit2dCenterX.setModel(self.__fit2dGeometry.centerX())
self._fit2dCenterY.setModel(self.__fit2dGeometry.centerY())
self._fit2dTilt.setModel(self.__fit2dGeometry.tilt())
self._fit2dTiltPlan.setModel(self.__fit2dGeometry.tiltPlan())
self._pyfaiDistance.setModel(self.__geometry.distance())
self._pyfaiPoni1.setModel(self.__geometry.poni1())
self._pyfaiPoni2.setModel(self.__geometry.poni2())
self._pyfaiRotation1.setModel(self.__geometry.rotation1())
self._pyfaiRotation2.setModel(self.__geometry.rotation2())
self._pyfaiRotation3.setModel(self.__geometry.rotation3())
self.__geometry.changed.connect(self.__updateFit2dFromPyfai)
self.__fit2dGeometry.changed.connect(self.__updatePyfaiFromFit2d)
self.__geometry.changed.connect(self.__updateButtons)
# NOTE: All the buttons have to be create here.
# Changing available buttons on the focus event create a segfault
types = (qt.QDialogButtonBox.Ok | qt.QDialogButtonBox.Cancel
| qt.QDialogButtonBox.Reset | qt.QDialogButtonBox.Close)
self._buttonBox.setStandardButtons(types)
resetButton = self._buttonBox.button(qt.QDialogButtonBox.Reset)
resetButton.clicked.connect(self.__resetToOriginalGeometry)
self.__updateButtons()
__license__ = "GPLv3+"
__copyright__ = "European Synchrotron Radiation Facility, Grenoble, France"
__date__ = "21/03/2013"
__satus__ = "development"
import sys, logging, json, os, time, types, threading
import os.path as op
import numpy
logging.basicConfig(level=logging.INFO)
logger = logging.getLogger("pyFAI.integrate_widget")
from PyQt4 import QtCore, QtGui, uic
from PyQt4.QtCore import SIGNAL
import pyFAI, fabio
from pyFAI.opencl import ocl
from pyFAI.utils import float_, int_, str_, get_ui_file
UIC = get_ui_file("integration.ui")
FROM_PYMCA = "From PyMca"
class AIWidget(QtGui.QWidget):
"""
"""
def __init__(self, input_data=None):
self.ai = pyFAI.AzimuthalIntegrator()
self.input_data = input_data
self.output_path = None
self.output_format = None
self.slow_dim = None
self.fast_dim = None
self.name = None
__license__ = "GPLv3+"
__copyright__ = "European Synchrotron Radiation Facility, Grenoble, France"
__date__ = "21/03/2013"
__satus__ = "development"
import sys, logging, json, os, time, types, threading
import os.path as op
import numpy
logging.basicConfig(level=logging.INFO)
logger = logging.getLogger("pyFAI.integrate_widget")
from PyQt4 import QtCore, QtGui, uic
from PyQt4.QtCore import SIGNAL
import pyFAI, fabio
from pyFAI.opencl import ocl
from pyFAI.utils import float_, int_, str_, get_ui_file
UIC = get_ui_file("integration.ui")
FROM_PYMCA = "From PyMca"
class AIWidget(QtGui.QWidget):
"""
"""
def __init__(self, input_data=None):
self.ai = pyFAI.AzimuthalIntegrator()
self.input_data = input_data
self.output_path = None
self.output_format = None
self.slow_dim = None
self.fast_dim = None
self.name = None
self._sem = threading.Semaphore()