def run_fem2(bdf_model, out_model, xref, punch,
sum_load, size, is_double,
reject, debug=False, log=None):
"""
Reads/writes the BDF to verify nothing has been lost
Parameters
----------
bdf_model : str
the filename to run
xref : bool
xrefs
punch : bool
punches
"""
assert os.path.exists(bdf_model), bdf_model
assert os.path.exists(out_model), out_model
fem2 = BDF(debug=debug, log=log)
fem2.log.info('starting fem2')
sys.stdout.flush()
try:
fem2.read_bdf(out_model, xref=xref, punch=punch)
except:
print("failed reading %r" % out_model)
raise
#fem2.sumForces()
#fem2.sumMoments()
out_model2 = bdf_model + '_out2'
fem2.write_bdf(out_model2, interspersed=True)
#fem2.writeAsCTRIA3(out_model_2)
os.remove(out_model2)
return fem2
def run_fem2(bdf_model,
out_model,
xref,
punch,
sum_load,
size,
precision,
reject,
debug=False,
log=None):
assert os.path.exists(bdf_model), bdf_model
assert os.path.exists(out_model), out_model
fem2 = BDF(debug=debug, log=log)
fem2.log.info('starting fem2')
sys.stdout.flush()
try:
fem2.read_bdf(out_model, xref=xref, punch=punch)
except:
print("failed reading %r" % out_model)
raise
#fem2.sumForces()
#fem2.sumMoments()
out_model2 = bdf_model + '_out2'
fem2.write_bdf(out_model2, interspersed=True)
#fem2.writeAsCTRIA3(out_model_2)
os.remove(out_model2)
return fem2
def test_combo_1(self):
model = BDF(debug=False, log=None)
bdfname = os.path.join(testpath, 'test_mass.dat')
model.read_bdf(bdfname, xref=True)
# these are valid
eids, mass = model.elements.get_mass_by_element_id([8, 9])
print('massA = %s' % mass)
eids, mass = model.elements.get_mass_by_element_id(range(1, 10))
print('massB = %s' % mass)
# no analysis - out of range
elements = model.elements[[100000, 100001]]
eids, mass = model.elements.get_mass_by_element_id(range(100000, 100005))
print('elementsC = %s' % eids)
print('massC = %s' % mass)
eids, mass = model.elements.get_mass_by_element_id(range(-10, -5))
print('elementsD = %s' % eids)
print('massD = %s' % mass)
print('-------------------------')
eids, mass = model.elements.get_mass_by_element_id(range(-3, 20))
print('massE = %s' % mass)
print('eidsE = %s' % eids)
print('\neid mass')
print('----------')
for eidi, massi in zip(eids, mass):
print('%-5s %-5s' % (eidi, massi))
def test_bad_01(self):
model = BDF(debug=False, log=None)
bdfname = os.path.join(testpath, 'test_mass.dat')
model.read_bdf(bdfname, xref=True)
# this passes silently
print(model.elements[['cat']])
# this does not
with self.assertRaises(TypeError):
print(model.elements[None])
#print('elements = %r' % model.elements['cat'])
with self.assertRaises(KeyError):
model.elements['cat']
def test_mass_solid_1(self): # passes
model = BDF(debug=False, log=None)
bdfname = os.path.join(TEST_PATH, 'test_mass.dat')
model.read_bdf(bdfname, xref=True)
# hexa - psolid - nsm = 0
#print(model.elements[7:8])
#print(model.elements[[7,8]])
model.elements[7:9]
model.elements[7:9:2]
model.elements[1:100]
#hexa = model.get_elements(7)
#hexa = model.get_elements(7)
#print(hexa)
hexa = model.elements[7]
print('hexa =', hexa)
mass = 0.2
volume = 2. # l * w * h = 1 * 1 * 2
rho = 0.1
E = 1.0
G = 2.0
nu = 3.0
centroid = array([0.5, 0.5, 1.0])
self.verify_psolid_element(hexa, mass, volume, centroid, rho, E, G, nu)
# tetra - psolid
tetra = model.elements[8]
mass = 1 / 30.
volume = 1 / 3. # 1/3 * b * h = 1/3 * 0.5 * 2.0
rho = 0.1
E = 1.0
G = 2.0
nu = 3.0
centroid = array([0.5, 0.25, 0.5])
self.verify_psolid_element(tetra, mass, volume, centroid, rho, E, G,
nu)
# penta - psolid
penta = model.elements[9]
mass = 0.1
volume = 1.0 # b * h = 0.5 * 2
rho = 0.1
E = 1.0
G = 2.0
nu = 3.0
centroid = array([2 / 3., 1 / 3., 1.])
self.verify_psolid_element(penta, mass, volume, centroid, rho, E, G,
nu)
def bdf_renumber(bdf_filename,
bdf_filename_out,
size=8,
is_double=False,
starting_id_dict=None,
round_ids=False,
cards_to_skip=None):
"""
Renumbers a BDF
Parameters
----------
bdf_filename : str
a bdf_filename (string; supported) or a BDF model (BDF)
that has been cross referenced and is fully valid (a equivalenced deck is not valid)
bdf_filename_out : str
a bdf_filename to write
size : int; {8, 16}; default=8
the bdf write precision
is_double : bool; default=False
the field precision to write
starting_id_dict : dict, None (default=None)
None : renumber everything starting from 1
dict : {key : starting_id}
key : str
the key (e.g. eid, nid, cid, ...)
starting_id : int, None
int : the value to start from
None : don't renumber this key
round_ids : bool; default=False
Should a rounding up be applied for each variable?
This makes it easier to read a deck and verify that it's been renumbered properly.
This only really applies when starting_id_dict is None
cards_to_skip : List[str]; (default=None -> don't skip any cards)
There are edge cases (e.g. FLUTTER analysis) where things can break due to
uncross-referenced cards. You need to disable entire classes of cards in
that case (e.g. all aero cards).
.. todo:: bdf_model option for bdf_filename hasn't been tested
.. todo:: add support for subsets (e.g. renumber only a subset of nodes/elements)
.. todo:: doesn't support partial renumbering
.. todo:: doesn't support element material coordinate systems
..warning :: spoints might be problematic...check
..warning :: still in development, but it usually brutally crashes if it's not supported
..warning :: be careful of card unsupported cards (e.g. ones not read in)
Supports
========
- GRIDs
- no superelements
- COORDx
- elements
- CELASx/CONROD/CBAR/CBEAM/CQUAD4/CTRIA3/CTETRA/CPENTA/CHEXA
- RBAR/RBAR1/RBE1/RBE2/RBE3/RSPLINE
- properties
- PSHELL/PCOMP/PCOMPG/PSOLID/PSHEAR/PBAR/PBARL
PROD/PTUBE/PBEAM
- mass
- CMASSx/CONMx/PMASS
- aero
- FLFACT
- SPLINEx
- FLUTTER
- partial case control
- METHOD/CMETHOD/FREQENCY
- LOAD/DLOAD/LSEQ/LOADSET...LOADSET/LSEQ is iffy
- SET cards
- nodes
- elements
- SPC/MPC/FLUTTER/FLFACT
- constraints
- SPC/SPCADD/SPCAX/SPCD
- MPC/MPCADD
- SUPORT/SUPORT1
- solution control/methods
- TSTEP/TSTEPNL
- NLPARM
- EIGB/EIGC/EIGRL/EIGR
- sets
- USET
- other
- tables
- materials
- loads/dloads
Not Done
========
- SPOINT
- any cards with SPOINTs
- DMIG/DMI/DMIJ/DMIJI/DMIK/etc.
- CELASx
- CDAMPx
- superelements
- aero cards
- CAEROx
- PAEROx
- thermal cards?
- optimization cards
- SETx
- PARAM,GRDPNT,x; where x>0
- GRID SEID
- case control
- STATSUB
- SUBCASE
- global SET cards won't be renumbered properly
Examples
--------
# Renumber Everything; Start from 1
>>> bdf_renumber(bdf_filename, bdf_filename_out, size=8, is_double=False,
round_ids=False)
# Renumber Everything; Start Material IDs from 100
>>> starting_id_dict = {
'mid' : 100,
}
>>> bdf_renumber(bdf_filename, bdf_filename_out, size=8, is_double=False,
starting_ids_dict=starting_ids_dict, round_ids=False)
# Only Renumber Material IDs
>>> starting_id_dict = {
'cid' : None,
'nid' : None,
'eid' : None,
'pid' : None,
'mid' : 1,
'spc_id' : None,
'mpc_id' : None,
'load_id' : None,
'dload_id' : None,
'method_id' : None,
'cmethod_id' : None,
'spline_id' : None,
'table_id' : None,
'flfact_id' : None,
'flutter_id' : None,
'freq_id' : None,
'tstep_id' : None,
'tstepnl_id' : None,
'suport_id' : None,
'suport1_id' : None,
'tf_id' : None,
}
>>> bdf_renumber(bdf_filename, bdf_filename_out, size=8, is_double=False,
starting_ids_dict=starting_ids_dict, round_ids=False)
"""
starting_id_dict_default = {
'cid': 1,
'nid': 1,
'eid': 1,
'pid': 1,
'mid': 1,
'spc_id': 1,
'mpc_id': 1,
'load_id': 1,
'dload_id': 1,
'method_id': 1,
'cmethod_id': 1,
'spline_id': 1,
'table_id': 1,
'flfact_id': 1,
'flutter_id': 1,
'freq_id': 1,
'tstep_id': 1,
'tstepnl_id': 1,
'suport_id': 1,
'suport1_id': 1,
'tf_id': 1,
}
# fill up starting_id_dict
if starting_id_dict is None:
starting_id_dict = starting_id_dict_default
else:
for key, value in iteritems(starting_id_dict_default):
if key not in starting_id_dict:
starting_id_dict[key] = value
nid = None
cid = None
eid = None
pid = None
mid = None
spc_id = None
mpc_id = None
load_id = None
dload_id = None
method_id = None
cmethod_id = None
spline_id = None
table_id = None
flfact_id = None
flutter_id = None
freq_id = None
tstep_id = None
tstepnl_id = None
suport_id = None
suport1_id = None
tf_id = None
# turn them into variables
for key, value in sorted(iteritems(starting_id_dict)):
#assert isinstance(key, string_types), key
assert key in starting_id_dict_default, 'key=%r is invalid' % (key)
if value is None:
pass
else:
if not isinstance(value, integer_types):
msg = 'key=%r value=%r must be an integer; type(value)=%s' % (
key, value, type(value))
raise TypeError(msg)
if key == 'nid':
nid = int(value)
elif key == 'cid':
if value is None:
cid = None
else:
cid = int(value)
elif key == 'eid':
eid = int(value)
elif key == 'pid':
if value is None:
pid = None
else:
pid = int(value)
elif key == 'mid':
if value is None:
mid = None
else:
mid = int(value)
elif key == 'spc_id':
spc_id = int(value)
elif key == 'mpc_id':
mpc_id = int(value)
elif key == 'load_id':
load_id = int(value)
elif key == 'dload_id':
dload_id = int(value)
elif key == 'method_id':
method_id = int(value)
elif key == 'cmethod_id':
cmethod_id = int(value)
elif key == 'spline_id':
spline_id = int(value)
elif key == 'table_id':
table_id = int(value)
elif key == 'flfact_id':
flfact_id = int(value)
elif key == 'flutter_id':
flutter_id = int(value)
elif key == 'freq_id':
freq_id = int(value)
elif key == 'tstep_id':
tstep_id = int(value)
elif key == 'tstepnl_id':
tstepnl_id = int(value)
elif key == 'suport_id':
suport_id = int(value)
elif key == 'suport1_id':
suport1_id = int(value)
elif key == 'tf_id':
tf_id = int(value)
else:
raise NotImplementedError('key=%r' % key)
# build the maps
#eid_map = {}
#nid_map = {}
#reverse_nid_map = {}
#pid_map = {}
#mid_map = {}
#mpc_map = {}
#spc_map = {}
dload_map = {}
load_map = {}
cmethod_map = {}
method_map = {}
#flfact_map = {}
#flutter_map = {}
#aefact_map = {}
#freq_map = {}
tstep_map = {}
tstepnl_map = {}
suport_map = {}
suport1_map = {}
if isinstance(bdf_filename, string_types):
model = BDF(debug=False)
model.disable_cards(cards_to_skip)
model.read_bdf(bdf_filename)
else:
model = bdf_filename
elements = [
model.celas1,
model.celas2,
model.celas3,
model.celas4,
#model.cdamp1,
#model.cdamp2,
#model.cdamp3,
#model.cdamp4,
model.conrod,
model.crod,
model.ctube,
model.cbar,
model.cbeam,
model.cshear,
model.cquad4,
model.ctria3,
model.cquad8,
model.ctria6,
#model.ctriax,
model.ctriax6,
model.ctetra4,
model.ctetra10,
model.cpenta6,
model.cpenta15,
#model.cpyram5, model.cpyram13,
model.chexa8,
model.chexa20,
]
props = [
model.pelas,
#model.pdamp,
model.ptube,
model.ptube,
model.pbar,
model.pbarl,
model.pbeam,
model.pbeaml,
model.pshear,
model.pshell,
model.pcomp,
#model.pcompg,
model.psolid,
model.plsolid,
]
materials = [
model.mat1,
#model.mat2,
#model.mat3,
#model.mat4,
#model.mat5,
model.mat8,
#model.mat9,
#model.mat10,
#model.mat11,
]
loads = [
model.force,
model.force1,
model.force2,
model.moment,
model.moment1,
model.moment2,
model.pload,
model.pload1,
model.pload2,
model.pload4,
#model.rforce,
#model.dload,
#model.load,
#model.sload,
]
nid_map = {}
#reverse_nid_map = {}
if 'nid' in starting_id_dict and nid is not None:
#i = nid
#nid_map = {}
ngrids = model.grid.n
if ngrids:
nids = model.grid.node_id - 1
nid_map.update({(nid + nids[i]): (i + 1) for i in range(ngrids)})
#reverse_nid_map.update(
#{(i+1) : (nid + nids[i]) for i in range(ngrids)}) # index to nid
#print(min(nid_map))
# TODO: SPOINTs
# TODO: EPOINTs
#if model.spoints.points:
cid_map = {}
if 'cid' in starting_id_dict and cid is not None:
cids = model.coords.coords.keys()
#print(cids)
ncoords = len(cids)
cids.sort()
#print('cids =', cids)
cid_map.update({(cid + cids[i] - 1): (i) for i in range(ncoords)})
#print('cid_map =', cid_map)
eid_map = {}
if 'eid' in starting_id_dict and pid is not None:
eids = [element.element_id for element in elements if element.n]
eids.append(model.rigid_elements.keys())
eids = np.hstack(eids)
neids = len(eids)
eids.sort()
eid_map.update({eids[i]: (i + eid) for i in range(neids)})
pid_map = {}
if 'pid' in starting_id_dict and pid is not None:
pids = np.hstack([prop.property_id for prop in props if prop.n])
npids = len(pids)
pids.sort()
pid_map.update({pids[i]: (i + pid) for i in range(npids)})
mid_map = {}
if 'mid' in starting_id_dict and mid is not None:
mids = np.hstack([mat.material_id for mat in materials])
nmids = len(mids)
mids.sort()
mid_map.update({mids[i]: (mid + i) for i in range(nmids)})
load_map = {}
if 'load_id' in starting_id_dict and load_id is not None:
loadsi = [load.load_id for load in loads if load.n]
if loadsi:
#print(loadsi)
load_ids = np.unique(np.hstack(loadsi))
del loadsi
nload_ids = len(load_ids)
load_ids.sort()
load_map.update(
{load_ids[i]: (load_id + i)
for i in range(nload_ids)})
spc_map = {}
if 'spc_id' in starting_id_dict and spc_map is not None:
spcs = [model.spc, model.spc1, model.spcadd]
spcsi = []
for spc_obj in spcs:
#print(spc_obj)
#spc_ids = [spc.spc_id for spc_id, spc in iteritems(spc_obj) if spc.n]
spc_ids = spc_obj.keys()
if spc_ids:
spcsi.append(spc_ids)
#spcsi = [spc_id for spc_id in spcs]
#print('spcsi =', spcsi)
#asdf
if spcsi:
#print(loadsi)
spc_ids = np.unique(np.hstack(spcsi))
#del spcsi
nspc_ids = len(spc_ids)
spc_ids.sort()
spc_map.update({spc_ids[i]: (spc_id + i) for i in range(nspc_ids)})
#print('spc_ids =', spc_ids)
caero_map = {}
#if model.caeros:
#caeros = model.caeros.keys()
#caeros.sort()
#ncaeros = len(caeros)
#caero_map = {caeros[i] : (i+1) for i in range(ncaeros)}
paero_map = {}
if model.paeros:
paeros = model.paeros.keys()
paeros.sort()
npaeros = len(paeros)
paero_map = {paeros[i]: (i + 1) for i in range(npaeros)}
aefact_map = {}
if model.aefacts:
aefacts = model.aefacts.keys()
aefacts.sort()
naefacts = len(aefacts)
aefact_map = {aefacts[i]: (i + 1) for i in range(naefacts)}
spline_map = {}
#if model.splines:
#splines = model.splines.keys()
#splines.sort()
#nsplines = len(splines)
#spline_map = {splines[i] : (i+1) for i in range(nsplines)}
set_map = {}
if model.sets:
sets = model.sets.keys()
sets.sort()
nsets = len(sets)
set_map = {sets[i]: (i + 1) for i in range(nsets)}
#load_map = {}
maps = {
'node': nid_map,
'coord': cid_map,
'property': pid_map,
'element': eid_map,
'load': load_map,
'material': mid_map,
'caero': caero_map, # ???
'paero': paero_map, # PAEROx
'aefact': aefact_map, # ???
'spline': spline_map, # SPLINE1-SPLINE5
'set': set_map,
}
model.grid.update(maps)
model.coords.update(maps)
for elem in elements:
elem.update(maps)
rigid_elements2 = {}
for eid, elem in iteritems(model.rigid_elements):
eid2 = eid_map[eid]
rigid_elements2[eid2] = eid_map[eid]
elem.update(maps)
for prop in props:
prop.update(maps)
for mat in materials:
mat.update(maps)
for spc_dict in spcs:
for spc_id, spc in iteritems(spc_dict):
spc.update(maps)
if model.aero is not None:
model.aero.update(maps)
if model.aeros is not None:
model.aeros.update(maps)
for caero in itervalues(model.caeros):
caero.update(maps)
for spline in itervalues(model.splines):
spline.update(model, maps)
for flutter in itervalues(model.flutters):
flutter.update(maps)
for flfact in itervalues(model.flfacts):
flfact.update(maps)
for flutter in itervalues(model.flutters):
flutter.update(maps)
for desvar in itervalues(model.desvars):
desvar.update(maps)
for dconstr in itervalues(model.dconstrs):
dconstr.update(maps)
for dresp in itervalues(model.dresps):
dresp.update(maps)
for dconadd in itervalues(model.dconadds):
dconadd.update(maps)
for dvgrid in itervalues(model.dvgrids):
dvgrid.update(maps)
for dvcrel in itervalues(model.dvcrels):
dvcrel.update(maps)
for dvmrel in itervalues(model.dvmrels):
dvmrel.update(maps)
for dvprel in itervalues(model.dvprels):
dvprel.update(maps)
model.darea.update(maps)
model.dphase.update(maps)
if bdf_filename_out is not None:
model.write_bdf(bdf_filename_out,
size=size,
is_double=is_double,
interspersed=False)
return model
def test_mass_shell_1(self): # passes
model = BDF(debug=False, log=None)
bdfname = os.path.join(testpath, 'test_mass.dat')
model.read_bdf(bdfname, xref=True)
###########
# QUADS
centroid = array([.5, .5, 0.])
normal = array([.0, .0, 1.])
###########
# quad - pcomp
quad = model.elements[1]
i = model.properties_shell.pcomp.get_property_index_by_property_id(quad.property_id)
prop = model.properties_shell.pcomp[i]
#mat = model.properties_shell.pshell[prop.material_id]
mass = 0.12
area = 1.0
nsm = 0.
thickness = 0.7
rho1 = 0.1
rho10 = 0.2
t1 = 0.1
t10 = 0.5
# there are two layers of t1
mpa = (2. * rho1 * t1 + rho10 * t10) + nsm
mass2 = mpa * area
assert allclose(mass, mass2), 'mass=%s mass2=%s diff=%s' % (mass, mass2, abs(mass - mass2))
self.verify_pcomp_element(quad, prop, nsm, thickness, mass, area, centroid, normal)
rho = None
# quad - pshell, nsm=0
eid = 3
pid = 2
quad = model.elements[eid]
prop = model.properties_shell.pshell.slice_by_property_id(pid)
#mat = model.materials[prop.material_id] # good?
mat = None
rho = 0.1
mass = 0.0125
t = 0.125
nsm = 0.
area = 1.
mass2 = area * (rho * t + nsm)
assert allclose(mass, mass2), 'eid=%s pid=%s mass=%s mass2=%s diff=%s\n%s%s%s\nrho=%s A=%s t=%s nsm=%s' % (
eid, pid, mass, mass2, abs(mass - mass2), quad, prop, mat, rho, area, t, nsm)
centroid = array([.5, .5, 0.])
normal = array([.0, .0, 1.])
self.verify_pshell_element(quad, prop, mat, rho, mass, area, centroid, normal, nsm)
# quad - pshell, nsm=1
quad = model.elements[5]
prop = model.properties_shell.pshell.slice_by_property_id(quad.property_id)
#mat = model.properties_shell.pshell[prop.material_id]
mat = None
mass = 1.0125 # mass w/o nsm + 1.0 b/c area=1
nsm = 1.
self.verify_pshell_element(quad, prop, mat, rho, mass, area, centroid, normal, nsm)
###########
# TRIS
centroid = array([2., 1., 0.]) / 3.
normal = array([.0, .0, 1.])
###########
# tri - pcomp
tri = model.elements[2]
prop = model.properties_shell.pcomp.slice_by_property_id(tri.property_id)
#mat = model.properties_shell.pshell[prop.material_id]
mass = 0.06
area = 0.5
nsm = 0.
thickness = 0.7
self.verify_pcomp_element(tri, prop, nsm, thickness, mass, area, centroid, normal)
# tri - pshell, nsm=0
tri = model.elements[4]
i = model.properties_shell.pshell.get_property_index_by_property_id(tri.property_id)
prop = model.properties_shell.pshell[i]
#mat = model.properties_shell.pshell[prop.material_id]
mat = None
mass = 0.00625
nsm = 0.
self.verify_pshell_element(tri, prop, mat, rho, mass, area, centroid, normal, nsm)
# tri - pshell, nsm=1
tri = model.elements[6]
prop = model.properties_shell.pshell.slice_by_property_id(tri.property_id)
#mat = model.properties_shell.pshell[prop.material_id]
mat = None
mass = 0.50625 # mass w/o nsm + 0.5 b/c area=0.5
nsm = 1.
self.verify_pshell_element(tri, prop, mat, rho, mass, area, centroid, normal, nsm)