class DataWorker(QtCore.QObject):
run_start = QtCore.pyqtSignal()
config_data = QtCore.pyqtSignal(dict)
interpreted_data = QtCore.pyqtSignal(dict)
meta_data = QtCore.pyqtSignal(dict)
finished = QtCore.pyqtSignal()
def __init__(self):
QtCore.QObject.__init__(self)
self.integrate_readouts = 1
self.n_readout = 0
self._stop_readout = Event()
self.setup_raw_data_analysis()
def setup_raw_data_analysis(self):
self.interpreter = PyDataInterpreter()
self.histograming = PyDataHistograming()
self.interpreter.set_warning_output(False)
self.histograming.set_no_scan_parameter()
self.histograming.create_occupancy_hist(True)
self.histograming.create_rel_bcid_hist(True)
self.histograming.create_tot_hist(True)
self.histograming.create_tdc_hist(True)
def connect(self, socket_addr):
self.socket_addr = socket_addr
self.context = zmq.Context()
self.socket_pull = self.context.socket(zmq.PULL)
self.socket_pull.connect(self.socket_addr)
self.poller = zmq.Poller() # poll needed to be able to return QThread
self.poller.register(self.socket_pull, zmq.POLLIN)
@pyqtSlot(float)
def on_set_integrate_readouts(self, value):
self.integrate_readouts = value
def analyze_raw_data(self, raw_data):
self.interpreter.interpret_raw_data(raw_data)
self.histograming.add_hits(self.interpreter.get_hits())
@pyqtSlot()
def process_data(self): # infinite loop via QObject.moveToThread(), does not block event loop
while(not self._stop_readout.wait(0.001)): # use wait(), do not block here
# socks = dict(self.poller.poll(1))
# if self.socket_pull in socks and socks[self.socket_pull] == zmq.POLLIN:
# meta_data = self.socket_pull.recv_json()
try:
meta_data = self.socket_pull.recv_json(flags=zmq.NOBLOCK)
except zmq.Again:
pass
else:
name = meta_data.pop('name')
if name == 'FEI4readoutData':
data = self.socket_pull.recv()
# reconstruct numpy array
buf = buffer(data)
dtype = meta_data.pop('dtype')
shape = meta_data.pop('shape')
data_array = np.frombuffer(buf, dtype=dtype).reshape(shape)
# count readouts and reset
self.n_readout += 1
if self.integrate_readouts != 0 and self.n_readout % self.integrate_readouts == 0:
self.histograming.reset()
# we do not want to reset interpreter to keep the error counters
# self.interpreter.reset()
# interpreted data
self.analyze_raw_data(data_array)
if self.integrate_readouts == 0 or self.n_readout % self.integrate_readouts == self.integrate_readouts - 1:
interpreted_data = {
'occupancy': self.histograming.get_occupancy(),
'tot_hist': self.histograming.get_tot_hist(),
'tdc_counters': self.interpreter.get_tdc_counters(),
'error_counters': self.interpreter.get_error_counters(),
'service_records_counters': self.interpreter.get_service_records_counters(),
'trigger_error_counters': self.interpreter.get_trigger_error_counters(),
'rel_bcid_hist': self.histograming.get_rel_bcid_hist()}
self.interpreted_data.emit(interpreted_data)
# meta data
meta_data.update({'n_hits': self.interpreter.get_n_hits(), 'n_events': self.interpreter.get_n_events()})
self.meta_data.emit(meta_data)
elif name == 'RunConf':
# TODO: from FE config
try:
n_bcid = int(data[1]['trig_count'])
except KeyError:
n_bcid = 0
self.histograming.reset()
self.interpreter.reset()
self.interpreter.set_trig_count(n_bcid)
self.run_start.emit()
self.config_data.emit(meta_data)
self.finished.emit()
# @pyqtSlot()
def stop(self):
self._stop_readout.set()
class DataWorker(QtCore.QObject):
run_start = QtCore.pyqtSignal()
config_data = QtCore.pyqtSignal(dict)
interpreted_data = QtCore.pyqtSignal(dict)
meta_data = QtCore.pyqtSignal(dict)
finished = QtCore.pyqtSignal()
def __init__(self):
QtCore.QObject.__init__(self)
self.integrate_readouts = 1
self.n_readout = 0
self._stop_readout = Event()
self.setup_raw_data_analysis()
def setup_raw_data_analysis(self):
self.interpreter = PyDataInterpreter()
self.histograming = PyDataHistograming()
self.interpreter.set_warning_output(False)
self.histograming.set_no_scan_parameter()
self.histograming.create_occupancy_hist(True)
self.histograming.create_rel_bcid_hist(True)
self.histograming.create_tot_hist(True)
self.histograming.create_tdc_hist(True)
def connect(self, socket_addr):
self.socket_addr = socket_addr
self.context = zmq.Context()
self.socket_pull = self.context.socket(zmq.PULL)
self.socket_pull.connect(self.socket_addr)
self.poller = zmq.Poller() # poll needed to be able to return QThread
self.poller.register(self.socket_pull, zmq.POLLIN)
@pyqtSlot(float)
def on_set_integrate_readouts(self, value):
self.integrate_readouts = value
def analyze_raw_data(self, raw_data):
self.interpreter.interpret_raw_data(raw_data)
self.histograming.add_hits(self.interpreter.get_hits())
@pyqtSlot()
def process_data(
self
): # infinite loop via QObject.moveToThread(), does not block event loop
while (not self._stop_readout.wait(0.001)
): # use wait(), do not block here
# socks = dict(self.poller.poll(1))
# if self.socket_pull in socks and socks[self.socket_pull] == zmq.POLLIN:
# meta_data = self.socket_pull.recv_json()
try:
meta_data = self.socket_pull.recv_json(flags=zmq.NOBLOCK)
except zmq.Again:
pass
else:
name = meta_data.pop('name')
if name == 'FEI4readoutData':
data = self.socket_pull.recv()
# reconstruct numpy array
buf = buffer(data)
dtype = meta_data.pop('dtype')
shape = meta_data.pop('shape')
data_array = np.frombuffer(buf, dtype=dtype).reshape(shape)
# count readouts and reset
self.n_readout += 1
if self.integrate_readouts != 0 and self.n_readout % self.integrate_readouts == 0:
self.histograming.reset()
# we do not want to reset interpreter to keep the error counters
# self.interpreter.reset()
# interpreted data
self.analyze_raw_data(data_array)
if self.integrate_readouts == 0 or self.n_readout % self.integrate_readouts == self.integrate_readouts - 1:
interpreted_data = {
'occupancy':
self.histograming.get_occupancy(),
'tot_hist':
self.histograming.get_tot_hist(),
'tdc_counters':
self.interpreter.get_tdc_counters(),
'error_counters':
self.interpreter.get_error_counters(),
'service_records_counters':
self.interpreter.get_service_records_counters(),
'trigger_error_counters':
self.interpreter.get_trigger_error_counters(),
'rel_bcid_hist':
self.histograming.get_rel_bcid_hist()
}
self.interpreted_data.emit(interpreted_data)
# meta data
meta_data.update({
'n_hits':
self.interpreter.get_n_hits(),
'n_events':
self.interpreter.get_n_events()
})
self.meta_data.emit(meta_data)
elif name == 'RunConf':
# TODO: from FE config
try:
n_bcid = int(data[1]['trig_count'])
except KeyError:
n_bcid = 0
self.histograming.reset()
self.interpreter.reset()
self.interpreter.set_trig_count(n_bcid)
self.run_start.emit()
self.config_data.emit(meta_data)
self.finished.emit()
# @pyqtSlot()
def stop(self):
self._stop_readout.set()
class DataWorker(QtCore.QObject):
run_start = QtCore.pyqtSignal()
run_config_data = QtCore.pyqtSignal(dict)
global_config_data = QtCore.pyqtSignal(dict)
filename = QtCore.pyqtSignal(dict)
interpreted_data = QtCore.pyqtSignal(dict)
meta_data = QtCore.pyqtSignal(dict)
finished = QtCore.pyqtSignal()
def __init__(self):
QtCore.QObject.__init__(self)
self.integrate_readouts = 1
self.n_readout = 0
self._stop_readout = Event()
self.setup_raw_data_analysis()
self.reset_lock = Lock()
def setup_raw_data_analysis(self):
self.interpreter = PyDataInterpreter()
self.histograming = PyDataHistograming()
self.interpreter.set_warning_output(False)
self.histograming.set_no_scan_parameter()
self.histograming.create_occupancy_hist(True)
self.histograming.create_rel_bcid_hist(True)
self.histograming.create_tot_hist(True)
self.histograming.create_tdc_hist(True)
def connect(self, socket_addr):
self.socket_addr = socket_addr
self.context = zmq.Context()
self.socket_pull = self.context.socket(zmq.SUB) # subscriber
self.socket_pull.setsockopt(zmq.SUBSCRIBE, "") # do not filter any data
self.socket_pull.connect(self.socket_addr)
@pyqtSlot(float)
def on_set_integrate_readouts(self, value):
self.integrate_readouts = value
# @pyqtSlot()
def reset(self):
with self.reset_lock:
self.histograming.reset()
self.interpreter.reset()
self.n_readout = 0
def analyze_raw_data(self, raw_data):
self.interpreter.interpret_raw_data(raw_data)
self.histograming.add_hits(self.interpreter.get_hits())
@pyqtSlot()
def process_data(self): # infinite loop via QObject.moveToThread(), does not block event loop
while not self._stop_readout.wait(0.01): # use wait(), do not block here
with self.reset_lock:
try:
meta_data = self.socket_pull.recv_json(flags=zmq.NOBLOCK)
except zmq.Again:
pass
else:
name = meta_data.pop("name")
if name == "ReadoutData":
data = self.socket_pull.recv()
# reconstruct numpy array
buf = buffer(data)
dtype = meta_data.pop("dtype")
shape = meta_data.pop("shape")
data_array = np.frombuffer(buf, dtype=dtype).reshape(shape)
# count readouts and reset
self.n_readout += 1
if self.integrate_readouts != 0 and self.n_readout % self.integrate_readouts == 0:
self.histograming.reset()
# we do not want to reset interpreter to keep the error counters
# self.interpreter.reset()
# interpreted data
self.analyze_raw_data(data_array)
if (
self.integrate_readouts == 0
or self.n_readout % self.integrate_readouts == self.integrate_readouts - 1
):
interpreted_data = {
"occupancy": self.histograming.get_occupancy(),
"tot_hist": self.histograming.get_tot_hist(),
"tdc_counters": self.interpreter.get_tdc_counters(),
"error_counters": self.interpreter.get_error_counters(),
"service_records_counters": self.interpreter.get_service_records_counters(),
"trigger_error_counters": self.interpreter.get_trigger_error_counters(),
"rel_bcid_hist": self.histograming.get_rel_bcid_hist(),
}
self.interpreted_data.emit(interpreted_data)
# meta data
meta_data.update(
{"n_hits": self.interpreter.get_n_hits(), "n_events": self.interpreter.get_n_events()}
)
self.meta_data.emit(meta_data)
elif name == "RunConf":
self.run_config_data.emit(meta_data)
elif name == "GlobalRegisterConf":
trig_count = int(meta_data["conf"]["Trig_Count"])
self.interpreter.set_trig_count(trig_count)
self.global_config_data.emit(meta_data)
elif name == "Reset":
self.histograming.reset()
self.interpreter.reset()
self.run_start.emit()
elif name == "Filename":
self.filename.emit(meta_data)
self.finished.emit()
# @pyqtSlot()
def stop(self):
self._stop_readout.set()
class DataWorker(QtCore.QObject):
connected = QtCore.pyqtSignal(bool)
data_ready = QtCore.pyqtSignal(tuple, list)
def __init__(self):
QtCore.QObject.__init__(self)
self.integrate_readouts = 0
self.n_readout = 0
self.setup_raw_data_analysis()
def setup_raw_data_analysis(self):
self.interpreter = PyDataInterpreter()
self.histograming = PyDataHistograming()
self.interpreter.set_warning_output(False)
self.histograming.set_no_scan_parameter()
self.histograming.create_occupancy_hist(True)
self.histograming.create_rel_bcid_hist(True)
self.histograming.create_tot_hist(True)
self.histograming.create_tdc_hist(True)
def connect(self, socket_addr):
self.socket_addr = socket_addr
self.context = zmq.Context()
self.socket = self.context.socket(zmq.PULL)
self.socket.connect(self.socket_addr)
self.poller = zmq.Poller() # poll needed to be able to return QThread
self.poller.register(self.socket, zmq.POLLIN)
self.connected.emit(True)
def set_integrate_readouts(self, value):
self.integrate_readouts = value
def recv_data(self, flags=0, copy=True, track=False):
if self.poller.poll(10):
meta_data = self.socket.recv_json(flags=flags)
msg = self.socket.recv(flags=flags, copy=copy, track=track)
array = np.fromstring(msg, dtype=meta_data['dtype'])
return array.reshape(meta_data['shape']), meta_data['timestamp_start'], meta_data['timestamp_stop'], meta_data['readout_error'], re.sub(r'\bOrderedDict\b|[()\[\],\']', '', meta_data['scan_parameters'])
else:
return None, None, None, None, None
def analyze_raw_data(self, raw_data):
self.interpreter.interpret_raw_data(raw_data)
self.histograming.add_hits(self.interpreter.get_hits())
def process_data(self):
data = self.recv_data() # poll on ZMQ queue for data
if data[1]: # identify non empty data by existing time stamp
self.n_readout += 1
if self.integrate_readouts and self.n_readout % self.integrate_readouts == 0:
self.histograming.reset()
self.analyze_raw_data(data[0])
interpreted_data = self.histograming.get_occupancy(), self.histograming.get_tot_hist(), self.interpreter.get_tdc_counters(), self.interpreter.get_error_counters(), self.interpreter.get_service_records_counters(), self.interpreter.get_trigger_error_counters(), self.histograming.get_rel_bcid_hist()
self.data_ready.emit(interpreted_data, [data[1], data[2], data[3], data[4]])
QtCore.QTimer.singleShot(0.0001, self.process_data)
def __del__(self):
self.socket.close()
self.context.term()
class DataWorker(QtCore.QObject):
run_start = QtCore.pyqtSignal()
run_config_data = QtCore.pyqtSignal(dict)
global_config_data = QtCore.pyqtSignal(dict)
filename = QtCore.pyqtSignal(dict)
interpreted_data = QtCore.pyqtSignal(dict)
meta_data = QtCore.pyqtSignal(dict)
finished = QtCore.pyqtSignal()
def __init__(self):
QtCore.QObject.__init__(self)
self.integrate_readouts = 1
self.n_readout = 0
self._stop_readout = Event()
self.setup_raw_data_analysis()
self.reset_lock = Lock()
def setup_raw_data_analysis(self):
self.interpreter = PyDataInterpreter()
self.histograming = PyDataHistograming()
self.interpreter.set_warning_output(False)
self.histograming.set_no_scan_parameter()
self.histograming.create_occupancy_hist(True)
self.histograming.create_rel_bcid_hist(True)
self.histograming.create_tot_hist(True)
self.histograming.create_tdc_hist(True)
def connect(self, socket_addr):
self.socket_addr = socket_addr
self.context = zmq.Context()
self.socket_pull = self.context.socket(zmq.SUB) # subscriber
self.socket_pull.setsockopt(zmq.SUBSCRIBE,
'') # do not filter any data
self.socket_pull.connect(self.socket_addr)
@pyqtSlot(float)
def on_set_integrate_readouts(self, value):
self.integrate_readouts = value
# @pyqtSlot()
def reset(self):
with self.reset_lock:
self.histograming.reset()
self.interpreter.reset()
self.n_readout = 0
def analyze_raw_data(self, raw_data):
self.interpreter.interpret_raw_data(raw_data)
self.histograming.add_hits(self.interpreter.get_hits())
@pyqtSlot()
def process_data(
self
): # infinite loop via QObject.moveToThread(), does not block event loop
while (not self._stop_readout.wait(0.01)
): # use wait(), do not block here
with self.reset_lock:
try:
meta_data = self.socket_pull.recv_json(flags=zmq.NOBLOCK)
except zmq.Again:
pass
else:
name = meta_data.pop('name')
if name == 'ReadoutData':
data = self.socket_pull.recv()
# reconstruct numpy array
buf = buffer(data)
dtype = meta_data.pop('dtype')
shape = meta_data.pop('shape')
data_array = np.frombuffer(buf,
dtype=dtype).reshape(shape)
# count readouts and reset
self.n_readout += 1
if self.integrate_readouts != 0 and self.n_readout % self.integrate_readouts == 0:
self.histograming.reset()
# we do not want to reset interpreter to keep the error counters
# self.interpreter.reset()
# interpreted data
self.analyze_raw_data(data_array)
if self.integrate_readouts == 0 or self.n_readout % self.integrate_readouts == self.integrate_readouts - 1:
interpreted_data = {
'occupancy':
self.histograming.get_occupancy(),
'tot_hist':
self.histograming.get_tot_hist(),
'tdc_counters':
self.interpreter.get_tdc_counters(),
'error_counters':
self.interpreter.get_error_counters(),
'service_records_counters':
self.interpreter.get_service_records_counters(
),
'trigger_error_counters':
self.interpreter.get_trigger_error_counters(),
'rel_bcid_hist':
self.histograming.get_rel_bcid_hist()
}
self.interpreted_data.emit(interpreted_data)
# meta data
meta_data.update({
'n_hits':
self.interpreter.get_n_hits(),
'n_events':
self.interpreter.get_n_events()
})
self.meta_data.emit(meta_data)
elif name == 'RunConf':
self.run_config_data.emit(meta_data)
elif name == 'GlobalRegisterConf':
trig_count = int(meta_data['conf']['Trig_Count'])
self.interpreter.set_trig_count(trig_count)
self.global_config_data.emit(meta_data)
elif name == 'Reset':
self.histograming.reset()
self.interpreter.reset()
self.run_start.emit()
elif name == 'Filename':
self.filename.emit(meta_data)
self.finished.emit()
# @pyqtSlot()
def stop(self):
self._stop_readout.set()
