def of_demo_23():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 23 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# Input Port
# IPv4 Destination Address
eth_type = ETH_TYPE_MPLS_UCAST
in_port = 13
mpls_label = 27
# --- Flow Actions: Set Field
# Output
new_mpls_label = 44
output_port = 14
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" MPLS Label (%s)" %
(hex(eth_type), in_port, mpls_label))
print (" Action: Set Field (MPLS Label %s)\n"
" Output (Physical Port number %s)" %
(new_mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 29
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name="Change MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1022)
flow_entry.set_flow_cookie(cookie=401)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = SetFieldAction(order=0)
action.set_mpls_label(new_mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=2)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# MPLS Label
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_mpls_label(mpls_label)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
# 'Output'
instruction = Instruction(instruction_order = 0)
action = SetFieldAction(order = 0)
action.set_mpls_label(new_mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order = 1, port = 2)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# MPLS Label
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_mpls_label(mpls_label)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK) == True):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
def of_demo_24():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 24 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# Input Port
# MPLS Label
eth_type = ETH_TYPE_MPLS_UCAST
in_port = 14
mpls_label = 44
# --- Flow Actions: Pop MPLS
# Output
pop_ether_type = ETH_TYPE_MPLS_UCAST
output_port = 13
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" MPLS Label (%s)" %
(hex(eth_type), in_port, mpls_label))
print (" Action: Pop MPLS (Ethernet Type %s)\n"
" Output (Physical Port number %s)" %
(pop_ether_type, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 30
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name="Strip MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1023)
flow_entry.set_flow_cookie(cookie=889)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Pop MPLS Header'
# 'Output'
instruction = Instruction(instruction_order=0)
action = PopMplsHeaderAction(order=0)
action.set_eth_type(pop_ether_type)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# MPLS Label
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_mpls_label(mpls_label)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_42():
f = "cfg.yml"
d = {}
if load_dict_from_file(f, d) is False:
print ("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d["ctrlIpAddr"]
ctrlPortNum = d["ctrlPortNum"]
ctrlUname = d["ctrlUname"]
ctrlPswd = d["ctrlPswd"]
nodeName = d["nodeName"]
rundelay = d["rundelay"]
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 42 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" % (ctrlIpAddr, nodeName))
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Modify MPLS TTL example1"
priority = 900
cookie = 1300
match_in_port = 3
match_eth_type = ETH_TYPE_MPLS_UCAST
match_mpls_label = 567
act_mod_mpls_ttl = 2
act_out_port = 112
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (
" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" MPLS Label (%s)" % (match_in_port, hex(match_eth_type), match_mpls_label)
)
print (" Actions: Set MPLS TTL (%s)\n" " Output (%s)" % (act_mod_mpls_ttl, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetMplsTTLAction(action_order)
action.set_ttl(act_mod_mpls_ttl)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_mpls_label(match_mpls_label)
flow_entry1.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if status.eq(STATUS.OK):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
table_id = 0
flow_id += 1
flow_name = "Modify MPLS TTL example2"
priority = 900
cookie = 1300
match_in_port = 112
match_eth_type = ETH_TYPE_MPLS_UCAST
match_mpls_label = 567
act_out_port = 3
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (
" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" MPLS Label (%s)" % (match_in_port, hex(match_eth_type), match_mpls_label)
)
print (" Actions: Decrement MPLS TTL\n" " Output (%s)" % (act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry2 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry2.set_flow_table_id(table_id)
flow_entry2.set_flow_name(flow_name)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_hard_timeout(0)
flow_entry2.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = DecMplsTTLAction(action_order)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_mpls_label(match_mpls_label)
flow_entry2.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if status.eq(STATUS.OK):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print ("\n")
print (
"<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName)
)
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_42():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 42 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Modify MPLS TTL example1"
priority = 900
cookie = 1300
match_in_port = 3
match_eth_type = ETH_TYPE_MPLS_UCAST
match_mpls_label = 567
act_mod_mpls_ttl = 2
act_out_port = 112
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" MPLS Label (%s)" %
(match_in_port, hex(match_eth_type), match_mpls_label))
print(
" Actions: Set MPLS TTL (%s)\n"
" Output (%s)" % (act_mod_mpls_ttl, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetMplsTTLAction(action_order)
action.set_ttl(act_mod_mpls_ttl)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_mpls_label(match_mpls_label)
flow_entry1.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
table_id = 0
flow_id += 1
flow_name = "Modify MPLS TTL example2"
priority = 900
cookie = 1300
match_in_port = 112
match_eth_type = ETH_TYPE_MPLS_UCAST
match_mpls_label = 567
act_out_port = 3
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" MPLS Label (%s)" %
(match_in_port, hex(match_eth_type), match_mpls_label))
print(
" Actions: Decrement MPLS TTL\n"
" Output (%s)" % (act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry2 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry2.set_flow_table_id(table_id)
flow_entry2.set_flow_name(flow_name)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_hard_timeout(0)
flow_entry2.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = DecMplsTTLAction(action_order)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_mpls_label(match_mpls_label)
flow_entry2.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print("\n")
print(
"<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName))
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
