def setup(hass, base_config):
"""Common setup for Envisalink devices."""
from pyenvisalink import EnvisalinkAlarmPanel
from pydispatch import dispatcher
global EVL_CONTROLLER
config = base_config.get(DOMAIN)
_host = config.get(CONF_EVL_HOST)
_port = config.get(CONF_EVL_PORT)
_code = config.get(CONF_CODE)
_panel_type = config.get(CONF_PANEL_TYPE)
_panic_type = config.get(CONF_PANIC)
_version = config.get(CONF_EVL_VERSION)
_user = config.get(CONF_USERNAME)
_pass = config.get(CONF_PASS)
_keep_alive = config.get(CONF_EVL_KEEPALIVE)
_zone_dump = config.get(CONF_ZONEDUMP_INTERVAL)
_zones = config.get(CONF_ZONES)
_partitions = config.get(CONF_PARTITIONS)
_connect_status = {}
EVL_CONTROLLER = EnvisalinkAlarmPanel(_host,
_port,
_panel_type,
_version,
_user,
_pass,
_zone_dump,
_keep_alive,
hass.loop)
def login_fail_callback(data):
"""Callback for when the evl rejects our login."""
_LOGGER.error("The envisalink rejected your credentials.")
_connect_status['fail'] = 1
def connection_fail_callback(data):
"""Network failure callback."""
_LOGGER.error("Could not establish a connection with the envisalink.")
_connect_status['fail'] = 1
def connection_success_callback(data):
"""Callback for a successful connection."""
_LOGGER.info("Established a connection with the envisalink.")
_connect_status['success'] = 1
def zones_updated_callback(data):
"""Handle zone timer updates."""
_LOGGER.info("Envisalink sent a zone update event. Updating zones...")
dispatcher.send(signal=SIGNAL_ZONE_UPDATE,
sender=None,
zone=data)
def alarm_data_updated_callback(data):
"""Handle non-alarm based info updates."""
_LOGGER.info("Envisalink sent new alarm info. Updating alarms...")
dispatcher.send(signal=SIGNAL_KEYPAD_UPDATE,
sender=None,
partition=data)
def partition_updated_callback(data):
"""Handle partition changes thrown by evl (including alarms)."""
_LOGGER.info("The envisalink sent a partition update event.")
dispatcher.send(signal=SIGNAL_PARTITION_UPDATE,
sender=None,
partition=data)
def stop_envisalink(event):
"""Shutdown envisalink connection and thread on exit."""
_LOGGER.info("Shutting down envisalink.")
EVL_CONTROLLER.stop()
def start_envisalink(event):
"""Startup process for the Envisalink."""
hass.loop.call_soon_threadsafe(EVL_CONTROLLER.start)
for _ in range(10):
if 'success' in _connect_status:
hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, stop_envisalink)
return True
elif 'fail' in _connect_status:
return False
else:
time.sleep(1)
_LOGGER.error("Timeout occurred while establishing evl connection.")
return False
EVL_CONTROLLER.callback_zone_timer_dump = zones_updated_callback
EVL_CONTROLLER.callback_zone_state_change = zones_updated_callback
EVL_CONTROLLER.callback_partition_state_change = partition_updated_callback
EVL_CONTROLLER.callback_keypad_update = alarm_data_updated_callback
EVL_CONTROLLER.callback_login_failure = login_fail_callback
EVL_CONTROLLER.callback_login_timeout = connection_fail_callback
EVL_CONTROLLER.callback_login_success = connection_success_callback
_result = start_envisalink(None)
if not _result:
return False
# Load sub-components for Envisalink
if _partitions:
load_platform(hass, 'alarm_control_panel', 'envisalink',
{CONF_PARTITIONS: _partitions,
CONF_CODE: _code,
CONF_PANIC: _panic_type}, base_config)
load_platform(hass, 'sensor', 'envisalink',
{CONF_PARTITIONS: _partitions,
CONF_CODE: _code}, base_config)
if _zones:
load_platform(hass, 'binary_sensor', 'envisalink',
{CONF_ZONES: _zones}, base_config)
return True
def async_setup(hass, config):
"""Set up for Envisalink devices."""
from pyenvisalink import EnvisalinkAlarmPanel
conf = config.get(DOMAIN)
host = conf.get(CONF_EVL_HOST)
port = conf.get(CONF_EVL_PORT)
code = conf.get(CONF_CODE)
panel_type = conf.get(CONF_PANEL_TYPE)
panic_type = conf.get(CONF_PANIC)
version = conf.get(CONF_EVL_VERSION)
user = conf.get(CONF_USERNAME)
password = conf.get(CONF_PASS)
keep_alive = conf.get(CONF_EVL_KEEPALIVE)
zone_dump = conf.get(CONF_ZONEDUMP_INTERVAL)
zones = conf.get(CONF_ZONES)
partitions = conf.get(CONF_PARTITIONS)
sync_connect = asyncio.Future(loop=hass.loop)
controller = EnvisalinkAlarmPanel(host, port, panel_type, version, user,
password, zone_dump, keep_alive,
hass.loop)
hass.data[DATA_EVL] = controller
@callback
def login_fail_callback(data):
"""Handle when the evl rejects our login."""
_LOGGER.error("The Envisalink rejected your credentials")
if not sync_connect.done():
sync_connect.set_result(False)
@callback
def connection_fail_callback(data):
"""Network failure callback."""
_LOGGER.error("Could not establish a connection with the Envisalink")
if not sync_connect.done():
sync_connect.set_result(False)
@callback
def connection_success_callback(data):
"""Handle a successful connection."""
_LOGGER.info("Established a connection with the Envisalink")
if not sync_connect.done():
hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP,
stop_envisalink)
sync_connect.set_result(True)
@callback
def zones_updated_callback(data):
"""Handle zone timer updates."""
_LOGGER.info("Envisalink sent a zone update event. Updating zones...")
async_dispatcher_send(hass, SIGNAL_ZONE_UPDATE, data)
@callback
def alarm_data_updated_callback(data):
"""Handle non-alarm based info updates."""
_LOGGER.info("Envisalink sent new alarm info. Updating alarms...")
async_dispatcher_send(hass, SIGNAL_KEYPAD_UPDATE, data)
@callback
def partition_updated_callback(data):
"""Handle partition changes thrown by evl (including alarms)."""
_LOGGER.info("The envisalink sent a partition update event")
async_dispatcher_send(hass, SIGNAL_PARTITION_UPDATE, data)
@callback
def stop_envisalink(event):
"""Shutdown envisalink connection and thread on exit."""
_LOGGER.info("Shutting down Envisalink")
controller.stop()
controller.callback_zone_timer_dump = zones_updated_callback
controller.callback_zone_state_change = zones_updated_callback
controller.callback_partition_state_change = partition_updated_callback
controller.callback_keypad_update = alarm_data_updated_callback
controller.callback_login_failure = login_fail_callback
controller.callback_login_timeout = connection_fail_callback
controller.callback_login_success = connection_success_callback
_LOGGER.info("Start envisalink.")
controller.start()
result = yield from sync_connect
if not result:
return False
# Load sub-components for Envisalink
if partitions:
hass.async_create_task(
async_load_platform(
hass, 'alarm_control_panel', 'envisalink', {
CONF_PARTITIONS: partitions,
CONF_CODE: code,
CONF_PANIC: panic_type
}, config))
hass.async_create_task(
async_load_platform(hass, 'sensor', 'envisalink', {
CONF_PARTITIONS: partitions,
CONF_CODE: code
}, config))
if zones:
hass.async_create_task(
async_load_platform(hass, 'binary_sensor', 'envisalink',
{CONF_ZONES: zones}, config))
return True
def async_setup(hass, config):
"""Common setup for Envisalink devices."""
from pyenvisalink import EnvisalinkAlarmPanel
conf = config.get(DOMAIN)
host = conf.get(CONF_EVL_HOST)
port = conf.get(CONF_EVL_PORT)
code = conf.get(CONF_CODE)
panel_type = conf.get(CONF_PANEL_TYPE)
panic_type = conf.get(CONF_PANIC)
version = conf.get(CONF_EVL_VERSION)
user = conf.get(CONF_USERNAME)
password = conf.get(CONF_PASS)
keep_alive = conf.get(CONF_EVL_KEEPALIVE)
zone_dump = conf.get(CONF_ZONEDUMP_INTERVAL)
zones = conf.get(CONF_ZONES)
partitions = conf.get(CONF_PARTITIONS)
sync_connect = asyncio.Future(loop=hass.loop)
controller = EnvisalinkAlarmPanel(
host, port, panel_type, version, user, password, zone_dump,
keep_alive, hass.loop)
hass.data[DATA_EVL] = controller
@callback
def login_fail_callback(data):
"""Callback for when the evl rejects our login."""
_LOGGER.error("The envisalink rejected your credentials.")
sync_connect.set_result(False)
@callback
def connection_fail_callback(data):
"""Network failure callback."""
_LOGGER.error("Could not establish a connection with the envisalink.")
sync_connect.set_result(False)
@callback
def connection_success_callback(data):
"""Callback for a successful connection."""
_LOGGER.info("Established a connection with the envisalink.")
hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, stop_envisalink)
sync_connect.set_result(True)
@callback
def zones_updated_callback(data):
"""Handle zone timer updates."""
_LOGGER.info("Envisalink sent a zone update event. Updating zones...")
async_dispatcher_send(hass, SIGNAL_ZONE_UPDATE, data)
@callback
def alarm_data_updated_callback(data):
"""Handle non-alarm based info updates."""
_LOGGER.info("Envisalink sent new alarm info. Updating alarms...")
async_dispatcher_send(hass, SIGNAL_KEYPAD_UPDATE, data)
@callback
def partition_updated_callback(data):
"""Handle partition changes thrown by evl (including alarms)."""
_LOGGER.info("The envisalink sent a partition update event.")
async_dispatcher_send(hass, SIGNAL_PARTITION_UPDATE, data)
@callback
def stop_envisalink(event):
"""Shutdown envisalink connection and thread on exit."""
_LOGGER.info("Shutting down envisalink.")
controller.stop()
controller.callback_zone_timer_dump = zones_updated_callback
controller.callback_zone_state_change = zones_updated_callback
controller.callback_partition_state_change = partition_updated_callback
controller.callback_keypad_update = alarm_data_updated_callback
controller.callback_login_failure = login_fail_callback
controller.callback_login_timeout = connection_fail_callback
controller.callback_login_success = connection_success_callback
_LOGGER.info("Start envisalink.")
controller.start()
result = yield from sync_connect
if not result:
return False
# Load sub-components for Envisalink
if partitions:
hass.async_add_job(async_load_platform(
hass, 'alarm_control_panel', 'envisalink', {
CONF_PARTITIONS: partitions,
CONF_CODE: code,
CONF_PANIC: panic_type
}, config
))
hass.async_add_job(async_load_platform(
hass, 'sensor', 'envisalink', {
CONF_PARTITIONS: partitions,
CONF_CODE: code
}, config
))
if zones:
hass.async_add_job(async_load_platform(
hass, 'binary_sensor', 'envisalink', {
CONF_ZONES: zones
}, config
))
return True
def setup(hass, base_config):
"""Common setup for Envisalink devices."""
from pyenvisalink import EnvisalinkAlarmPanel
from pydispatch import dispatcher
global EVL_CONTROLLER
config = base_config.get(DOMAIN)
_host = config.get(CONF_EVL_HOST)
_port = config.get(CONF_EVL_PORT)
_code = config.get(CONF_CODE)
_panel_type = config.get(CONF_PANEL_TYPE)
_panic_type = config.get(CONF_PANIC)
_version = config.get(CONF_EVL_VERSION)
_user = config.get(CONF_USERNAME)
_pass = config.get(CONF_PASS)
_keep_alive = config.get(CONF_EVL_KEEPALIVE)
_zone_dump = config.get(CONF_ZONEDUMP_INTERVAL)
_zones = config.get(CONF_ZONES)
_partitions = config.get(CONF_PARTITIONS)
_connect_status = {}
EVL_CONTROLLER = EnvisalinkAlarmPanel(_host, _port, _panel_type, _version,
_user, _pass, _zone_dump,
_keep_alive, hass.loop)
def login_fail_callback(data):
"""Callback for when the evl rejects our login."""
_LOGGER.error("The envisalink rejected your credentials.")
_connect_status['fail'] = 1
def connection_fail_callback(data):
"""Network failure callback."""
_LOGGER.error("Could not establish a connection with the envisalink.")
_connect_status['fail'] = 1
def connection_success_callback(data):
"""Callback for a successful connection."""
_LOGGER.info("Established a connection with the envisalink.")
_connect_status['success'] = 1
def zones_updated_callback(data):
"""Handle zone timer updates."""
_LOGGER.info("Envisalink sent a zone update event. Updating zones...")
dispatcher.send(signal=SIGNAL_ZONE_UPDATE, sender=None, zone=data)
def alarm_data_updated_callback(data):
"""Handle non-alarm based info updates."""
_LOGGER.info("Envisalink sent new alarm info. Updating alarms...")
dispatcher.send(signal=SIGNAL_KEYPAD_UPDATE,
sender=None,
partition=data)
def partition_updated_callback(data):
"""Handle partition changes thrown by evl (including alarms)."""
_LOGGER.info("The envisalink sent a partition update event.")
dispatcher.send(signal=SIGNAL_PARTITION_UPDATE,
sender=None,
partition=data)
def stop_envisalink(event):
"""Shutdown envisalink connection and thread on exit."""
_LOGGER.info("Shutting down envisalink.")
EVL_CONTROLLER.stop()
def start_envisalink(event):
"""Startup process for the Envisalink."""
hass.loop.call_soon_threadsafe(EVL_CONTROLLER.start)
for _ in range(10):
if 'success' in _connect_status:
hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, stop_envisalink)
return True
elif 'fail' in _connect_status:
return False
else:
time.sleep(1)
_LOGGER.error("Timeout occurred while establishing evl connection.")
return False
EVL_CONTROLLER.callback_zone_timer_dump = zones_updated_callback
EVL_CONTROLLER.callback_zone_state_change = zones_updated_callback
EVL_CONTROLLER.callback_partition_state_change = partition_updated_callback
EVL_CONTROLLER.callback_keypad_update = alarm_data_updated_callback
EVL_CONTROLLER.callback_login_failure = login_fail_callback
EVL_CONTROLLER.callback_login_timeout = connection_fail_callback
EVL_CONTROLLER.callback_login_success = connection_success_callback
_result = start_envisalink(None)
if not _result:
return False
# Load sub-components for Envisalink
if _partitions:
load_platform(
hass, 'alarm_control_panel', 'envisalink', {
CONF_PARTITIONS: _partitions,
CONF_CODE: _code,
CONF_PANIC: _panic_type
}, base_config)
load_platform(hass, 'sensor', 'envisalink', {
CONF_PARTITIONS: _partitions,
CONF_CODE: _code
}, base_config)
if _zones:
load_platform(hass, 'binary_sensor', 'envisalink',
{CONF_ZONES: _zones}, base_config)
return True
async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
"""Set up for Envisalink devices."""
conf = config[DOMAIN]
host = conf.get(CONF_HOST)
port = conf.get(CONF_EVL_PORT)
code = conf.get(CONF_CODE)
panel_type = conf.get(CONF_PANEL_TYPE)
panic_type = conf.get(CONF_PANIC)
version = conf.get(CONF_EVL_VERSION)
user = conf.get(CONF_USERNAME)
password = conf.get(CONF_PASS)
keep_alive = conf.get(CONF_EVL_KEEPALIVE)
zone_dump = conf.get(CONF_ZONEDUMP_INTERVAL)
zones = conf.get(CONF_ZONES)
partitions = conf.get(CONF_PARTITIONS)
connection_timeout = conf.get(CONF_TIMEOUT)
create_zone_bypass_switches = conf.get(CONF_CREATE_ZONE_BYPASS_SWITCHES)
sync_connect: asyncio.Future[bool] = asyncio.Future()
controller = EnvisalinkAlarmPanel(
host,
port,
panel_type,
version,
user,
password,
zone_dump,
keep_alive,
hass.loop,
connection_timeout,
create_zone_bypass_switches,
)
hass.data[DATA_EVL] = controller
@callback
def async_login_fail_callback(data):
"""Handle when the evl rejects our login."""
_LOGGER.error("The Envisalink rejected your credentials")
if not sync_connect.done():
sync_connect.set_result(False)
@callback
def async_connection_fail_callback(data):
"""Network failure callback."""
_LOGGER.error(
"Could not establish a connection with the Envisalink- retrying")
if not sync_connect.done():
hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP,
stop_envisalink)
sync_connect.set_result(True)
@callback
def async_connection_success_callback(data):
"""Handle a successful connection."""
_LOGGER.info("Established a connection with the Envisalink")
if not sync_connect.done():
hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP,
stop_envisalink)
sync_connect.set_result(True)
@callback
def async_zones_updated_callback(data):
"""Handle zone timer updates."""
_LOGGER.debug("Envisalink sent a zone update event. Updating zones")
async_dispatcher_send(hass, SIGNAL_ZONE_UPDATE, data)
@callback
def async_alarm_data_updated_callback(data):
"""Handle non-alarm based info updates."""
_LOGGER.debug("Envisalink sent new alarm info. Updating alarms")
async_dispatcher_send(hass, SIGNAL_KEYPAD_UPDATE, data)
@callback
def async_partition_updated_callback(data):
"""Handle partition changes thrown by evl (including alarms)."""
_LOGGER.debug("The envisalink sent a partition update event")
async_dispatcher_send(hass, SIGNAL_PARTITION_UPDATE, data)
@callback
def async_zone_bypass_update(data):
"""Handle zone bypass status updates."""
_LOGGER.debug(
"Envisalink sent a zone bypass update event. Updating zones")
async_dispatcher_send(hass, SIGNAL_ZONE_BYPASS_UPDATE, data)
@callback
def stop_envisalink(event):
"""Shutdown envisalink connection and thread on exit."""
_LOGGER.info("Shutting down Envisalink")
controller.stop()
async def handle_custom_function(call: ServiceCall) -> None:
"""Handle custom/PGM service."""
custom_function = call.data.get(ATTR_CUSTOM_FUNCTION)
partition = call.data.get(ATTR_PARTITION)
controller.command_output(code, partition, custom_function)
controller.callback_zone_timer_dump = async_zones_updated_callback
controller.callback_zone_state_change = async_zones_updated_callback
controller.callback_partition_state_change = async_partition_updated_callback
controller.callback_keypad_update = async_alarm_data_updated_callback
controller.callback_login_failure = async_login_fail_callback
controller.callback_login_timeout = async_connection_fail_callback
controller.callback_login_success = async_connection_success_callback
controller.callback_zone_bypass_update = async_zone_bypass_update
_LOGGER.info("Start envisalink")
controller.start()
if not await sync_connect:
return False
# Load sub-components for Envisalink
if partitions:
hass.async_create_task(
async_load_platform(
hass,
Platform.ALARM_CONTROL_PANEL,
"dscalarm",
{
CONF_PARTITIONS: partitions,
CONF_CODE: code,
CONF_PANIC: panic_type
},
config,
))
hass.async_create_task(
async_load_platform(
hass,
Platform.SENSOR,
"dscalarm",
{
CONF_PARTITIONS: partitions,
CONF_CODE: code
},
config,
))
if zones:
hass.async_create_task(
async_load_platform(hass, Platform.BINARY_SENSOR, "dscalarm",
{CONF_ZONES: zones}, config))
# Create zone bypass switches only if enabled and only for DSC panels
if create_zone_bypass_switches and panel_type == PANEL_TYPE_DSC:
hass.async_create_task(
async_load_platform(hass, "switch", "dscalarm",
{CONF_ZONES: zones}, config))
hass.services.async_register(DOMAIN,
SERVICE_CUSTOM_FUNCTION,
handle_custom_function,
schema=SERVICE_SCHEMA)
return True
async def async_setup(opp, config):
"""Set up for Envisalink devices."""
conf = config.get(DOMAIN)
host = conf.get(CONF_HOST)
port = conf.get(CONF_EVL_PORT)
code = conf.get(CONF_CODE)
panel_type = conf.get(CONF_PANEL_TYPE)
panic_type = conf.get(CONF_PANIC)
version = conf.get(CONF_EVL_VERSION)
user = conf.get(CONF_USERNAME)
password = conf.get(CONF_PASS)
keep_alive = conf.get(CONF_EVL_KEEPALIVE)
zone_dump = conf.get(CONF_ZONEDUMP_INTERVAL)
zones = conf.get(CONF_ZONES)
partitions = conf.get(CONF_PARTITIONS)
connection_timeout = conf.get(CONF_TIMEOUT)
sync_connect = asyncio.Future()
controller = EnvisalinkAlarmPanel(
host,
port,
panel_type,
version,
user,
password,
zone_dump,
keep_alive,
opp.loop,
connection_timeout,
)
opp.data[DATA_EVL] = controller
@callback
def login_fail_callback(data):
"""Handle when the evl rejects our login."""
_LOGGER.error("The Envisalink rejected your credentials")
if not sync_connect.done():
sync_connect.set_result(False)
@callback
def connection_fail_callback(data):
"""Network failure callback."""
_LOGGER.error("Could not establish a connection with the Envisalink- retrying")
if not sync_connect.done():
opp.bus.async_listen_once(EVENT_OPENPEERPOWER_STOP, stop_envisalink)
sync_connect.set_result(True)
@callback
def connection_success_callback(data):
"""Handle a successful connection."""
_LOGGER.info("Established a connection with the Envisalink")
if not sync_connect.done():
opp.bus.async_listen_once(EVENT_OPENPEERPOWER_STOP, stop_envisalink)
sync_connect.set_result(True)
@callback
def zones_updated_callback(data):
"""Handle zone timer updates."""
_LOGGER.debug("Envisalink sent a zone update event. Updating zones")
async_dispatcher_send(opp, SIGNAL_ZONE_UPDATE, data)
@callback
def alarm_data_updated_callback(data):
"""Handle non-alarm based info updates."""
_LOGGER.debug("Envisalink sent new alarm info. Updating alarms")
async_dispatcher_send(opp, SIGNAL_KEYPAD_UPDATE, data)
@callback
def partition_updated_callback(data):
"""Handle partition changes thrown by evl (including alarms)."""
_LOGGER.debug("The envisalink sent a partition update event")
async_dispatcher_send(opp, SIGNAL_PARTITION_UPDATE, data)
@callback
def stop_envisalink(event):
"""Shutdown envisalink connection and thread on exit."""
_LOGGER.info("Shutting down Envisalink")
controller.stop()
async def handle_custom_function(call):
"""Handle custom/PGM service."""
custom_function = call.data.get(ATTR_CUSTOM_FUNCTION)
partition = call.data.get(ATTR_PARTITION)
controller.command_output(code, partition, custom_function)
controller.callback_zone_timer_dump = zones_updated_callback
controller.callback_zone_state_change = zones_updated_callback
controller.callback_partition_state_change = partition_updated_callback
controller.callback_keypad_update = alarm_data_updated_callback
controller.callback_login_failure = login_fail_callback
controller.callback_login_timeout = connection_fail_callback
controller.callback_login_success = connection_success_callback
_LOGGER.info("Start envisalink")
controller.start()
result = await sync_connect
if not result:
return False
# Load sub-components for Envisalink
if partitions:
opp.async_create_task(
async_load_platform(
opp,
"alarm_control_panel",
"envisalink",
{CONF_PARTITIONS: partitions, CONF_CODE: code, CONF_PANIC: panic_type},
config,
)
)
opp.async_create_task(
async_load_platform(
opp,
"sensor",
"envisalink",
{CONF_PARTITIONS: partitions, CONF_CODE: code},
config,
)
)
if zones:
opp.async_create_task(
async_load_platform(
opp, "binary_sensor", "envisalink", {CONF_ZONES: zones}, config
)
)
opp.services.async_register(
DOMAIN, SERVICE_CUSTOM_FUNCTION, handle_custom_function, schema=SERVICE_SCHEMA
)
return True