def py_execute(self, args, design):
ys.log_header(design, "Allocating macrocells for SOPs\n")
for module in design.selected_whole_modules_warn():
sops = [
cell for cell in module.selected_cells()
if cell.type.str() == "$sop"
]
mcs = [
cell for cell in module.selected_cells()
if cell.type.str() == "$__macrocell"
]
print(mcs)
mcs_by_output = {
get_cell_port_wire_name(mc, ID_PORT_IO_A): mc
for mc in mcs if io_func_is(mc, "output")
}
print(mcs_by_output)
for sop in sops:
sop_output = get_cell_port_wire_name(sop, ID_PORT_Y)
if sop_output in mcs_by_output:
new_cell = mcs_by_output[sop_output]
print(
f"Allocate mc {new_cell.get_string_attribute(ys.IdString('$mc'))} for sop {sop.name.str()} (output wire {sop_output})"
)
else:
if len(self.device.available_mcs) == 0:
raise SystemExit("Ran out of macrocells")
mc = self.device.available_mcs[-1]
self.device.available_mcs = self.device.available_mcs[:-1]
new_cell = module.addCell(
module.uniquify(ys.IdString(f"$mc{mc}")),
ys.IdString("$__macrocell"))
new_cell.set_string_attribute(ID_ATTR_MC, mc)
new_cell.set_string_attribute(ID_ATTR_IO_FUNC, "input")
new_cell.set_string_attribute(ID_ATTR_LOGIC_FUNC, "sop")
new_cell.set_string_attribute(ID_ATTR_SOP, sop.name.str())
new_cell.setPort(ID_PORT_XT, get_cell_port(sop, ID_PORT_Y))
new_cell.setPort(ID_PORT_FB, get_cell_port(sop, ID_PORT_Y))
new_cell.setPort(ID_PORT_A, get_cell_port(sop, ID_PORT_A))
new_cell.setParam(ID_PARAM_DEPTH,
get_cell_param(sop, ID_PARAM_DEPTH))
new_cell.setParam(ID_PARAM_WIDTH,
get_cell_param(sop, ID_PARAM_WIDTH))
new_cell.setParam(ID_PARAM_TABLE,
get_cell_param(sop, ID_PARAM_TABLE))
new_cell.setParam(
ID_PARAM_ST_INV,
ys.Const(
ys.State.S1 if sop.has_attribute(ID_ATTR_INV_OUTPUT)
else ys.State.S0, 1))
self.device.input_sigs[get_cell_port_wire_name(
sop, ID_PORT_Y
)] = f"MC{new_cell.get_string_attribute(ID_ATTR_MC)}_FB"
def py_execute(self, args, design):
ys.log_header(design, "Plotting cell stats\n")
cell_stats = {}
for module in design.selected_whole_modules_warn():
for cell in module.selected_cells():
if cell.type.str() in cell_stats:
cell_stats[cell.type.str()] += 1
else:
cell_stats[cell.type.str()] = 1
plt.bar(range(len(cell_stats)), height = list(cell_stats.values()),align='center')
plt.xticks(range(len(cell_stats)), list(cell_stats.keys()))
plt.show()
def py_execute(self, args, design):
ys.log_header(design, "Plotting cell stats\n")
cell_stats = {}
for module in design.selected_whole_modules_warn():
for cell in module.selected_cells():
if cell.type.str() in cell_stats:
cell_stats[cell.type.str()] += 1
else:
cell_stats[cell.type.str()] = 1
plt.bar(range(len(cell_stats)),
height=list(cell_stats.values()),
align='center')
plt.xticks(range(len(cell_stats)), list(cell_stats.keys()))
plt.show()
def py_execute(self, args, design):
ys.log_header(design, "Coalescing $_NOT_ gates with $sop outputs\n")
for module in design.selected_whole_modules_warn():
# Find all the $_NOT_ cells that are fed by $sop cells, but where the
# $sop only feeds that $_NOT_ cell, remove the $_NOT_ cell, and add an
# inversion attribute to the $sop cell.
cell_inputs = {} # input wire name -> Set[Cell]
not_inputs = {} # input wire name -> Cell
sop_outputs = {} # output wire name -> Cell
for cell in [cell for cell in module.selected_cells()]:
inputs = get_cell_port(cell, ID_PORT_A).to_sigbit_vector()
for s in inputs:
if not s.is_wire():
continue # It's probably a const
name = f"{s.wire.name.str()}[{s.offset}]"
if name not in cell_inputs:
cell_inputs[name] = set()
cell_inputs[name].update([cell])
if cell.type.str() == "$_NOT_":
name = f"{inputs[0].wire.name.str()}[{s.offset}]"
not_inputs[name] = cell
if cell.type.str() == "$sop":
output = get_cell_port(cell,
ID_PORT_Y).to_sigbit_vector()[0]
name = f"{output.wire.name.str()}[{output.offset}]"
sop_outputs[name] = cell
inversions = [] # List[Tuple[$sop Cell, $_NOT_ Cell]]
for wire_name, cell in not_inputs.items():
if len(cell_inputs[wire_name]) == 1:
if wire_name in sop_outputs:
sop = sop_outputs[wire_name]
inversions.append((sop, cell))
cells_to_remove = []
for sop, not_cell in inversions:
sop.set_bool_attribute(ID_ATTR_INV_OUTPUT, True)
# Replace the output wire in the $sop with the output wire from the $_NOT_.
sop.setPort(ID_PORT_Y, get_cell_port(not_cell, ID_PORT_Y))
cells_to_remove.append(not_cell)
for cell in cells_to_remove:
module.remove(cell)
ys.log(
f"Coalesced {len(cells_to_remove)} $_NOT_ cells with $sop cells.\n"
)
def py_execute(self, args, design):
ys.log_header(design, f"Writing JED file {args[1]}\n")
file = args[1]
for module in design.selected_whole_modules_warn():
mcs = [
cell for cell in module.selected_cells()
if cell.type.str() == "$__macrocell"
]
for mc in mcs:
self.set_fuses_for_mc(mc)
fuse_attrs = {
k.str()[6:]: v.decode_string()
for k, v in module.attributes.items()
if k.str().startswith("$fuse.")
}
for k, v in fuse_attrs.items():
self.device.set_fuse(k, v)
self.device.commit_fuses(args[1])
def py_execute(self, args, design):
ys.log_header(design, "Replacing $sop cells equivalent to $_NOT_\n")
for module in design.selected_whole_modules_warn():
cells_to_remove = []
for cell in [
cell for cell in module.selected_cells()
if cell.type.str() == "$sop"
]:
sop_depth = cell.parameters.get(
ys.IdString("\\DEPTH")).as_int()
sop_width = cell.parameters.get(
ys.IdString("\\WIDTH")).as_int()
sop_table = cell.parameters.get(
ys.IdString("\\TABLE")).as_int()
sop_input = get_cell_port(cell, ID_PORT_A)
sop_output = get_cell_port(cell, ID_PORT_Y)
if sop_depth != 1 or sop_width != 1 or sop_table != 1:
continue
not_cell = module.addCell(
module.uniquify(ys.IdString("$notsop")),
ys.IdString("$_NOT_"))
not_cell.setPort(ys.IdString("\\A"), sop_input)
not_cell.setPort(ID_PORT_Y, sop_output)
ys.log(
f"$sop cell {cell.name.str()} replaced with $_NOT_ cell {not_cell.name.str()}\n"
)
cells_to_remove.append(cell)
for cell in cells_to_remove:
module.remove(cell)
ys.log(
f"Replaced {len(cells_to_remove)} $sop cells with $_NOT_ cells.\n"
)
def py_execute(self, args, design):
ys.log_header(design,
"Setting UIM multiplexer and product term fuses\n")
for module in design.selected_whole_modules_warn():
mcs = [
cell for cell in module.selected_cells()
if cell.type.str() == "$__macrocell"
]
mcs = [mc for mc in mcs if mc.has_attribute(ID_ATTR_LOGIC_FUNC)]
mcs = [
mc for mc in mcs
if mc.get_string_attribute(ID_ATTR_LOGIC_FUNC) == "sop"
]
mc_num_to_cell = {
mc.get_string_attribute(ID_ATTR_MC): mc
for mc in mcs
}
block_to_mcs = {block: [] for block in self.device.blocks}
for mc in mc_num_to_cell.keys():
block_to_mcs[self.device.mc_to_block[mc]].append(mc)
print(block_to_mcs)
print(self.device.input_sigs)
for blk, mcs in block_to_mcs.items():
print(f"Constructing set of signals in block {blk}")
# Construct the set of needed signals.
sigs = set()
for mc in mcs:
inputs = get_cell_port(mc_num_to_cell[mc],
ID_PORT_A).to_sigbit_vector()
sigs.update(set(i.wire.name.str() for i in inputs))
# Convert to ordered array of signames
sigs = [self.device.input_sigs[s] for s in sigs]
if len(sigs) == 0:
print(f"No used signals in block {blk}")
continue
print(f"Used signals in block {blk}: {sigs}")
# Construct the set of candidate switches for those signals.
candidate_switches = set()
for sig in sigs:
candidate_switches.update(
set(s for s in self.device.sig_to_uim[blk][sig]))
# Convert to ordered array
candidate_switches = [s for s in candidate_switches]
print(
f"Candidate switches in block {blk}: {candidate_switches}")
# Construct the cost matrix. We assign an different cost per candidate
# switch to help the algorithm be stable.
matrix = [[DISALLOWED for _ in range(len(candidate_switches))]
for _ in range(len(sigs))]
for row, sig in enumerate(sigs):
cost = 1
for candidate_switch in self.device.sig_to_uim[blk][sig]:
col = candidate_switches.index(candidate_switch)
matrix[row][col] = cost
cost += 1
cost_matrix = make_cost_matrix(
matrix, lambda cost: cost
if cost != DISALLOWED else DISALLOWED)
# Assign signals to switches.
m = Munkres()
indexes = m.compute(cost_matrix)
sig_to_switch = {}
print("Setting UIM fuses")
for r, c in indexes:
v = matrix[r][c]
print(f"Set {candidate_switches[c]} to {sigs[r]}")
module.set_string_attribute(
ys.IdString(f"$fuse.{candidate_switches[c]}"), sigs[r])
sig_to_switch[sigs[r]] = candidate_switches[c]
print(f"Setting product term fuses:")
for mc in mcs:
cell = mc_num_to_cell[mc]
if not cell.hasParam(ID_PARAM_TABLE):
continue
depth = cell.parameters.get(ID_PARAM_DEPTH).as_int()
# Width is the number of inputs
width = cell.parameters.get(ID_PARAM_WIDTH).as_int()
# for (int i = 0; i < sop_depth; i++) {
# for (int j = 0; j < sop_width; j++)
# {
# if (sop_table[2 * (i * sop_width + j) + 0])
# {
# and_in_comp.insert(sop_inputs[j]);
# }
# if (sop_table[2 * (i * sop_width + j) + 1])
# {
# and_in_true.insert(sop_inputs[j]);
# }
# }
table = cell.parameters.get(ID_PARAM_TABLE).as_string()
inputs = get_cell_port(cell, ID_PORT_A).to_sigbit_vector()
product_terms = []
print(f" Table for mc {mc} is {table}")
for i in range(depth):
offset = 2 * i * width
size = 2 * width
product_term = table[offset:offset + size]
product_terms.append(product_term)
for i, term in enumerate(product_terms):
print(f" Term {i}: {term}")
fuses = []
for j in range(0, len(term) // 2):
offset = 2 * j
pattern = term[offset:offset + 2]
sig = inputs[j].wire.name.str()
signame = self.device.input_sigs[sig]
uim = sig_to_switch[signame]
print(
f" Input {sig} ({signame}) is {pattern}")
if pattern[0] == "1": # negative
fuses.append(f"{uim}_N")
if pattern[1] == "1": # positive
fuses.append(f"{uim}_P")
cell.set_string_attribute(
ys.IdString(f"$fuse.MC{mc}.PT{i+1}"),
",".join(fuses))
def py_execute(self, args, design):
ys.log_header(design, "Adding IO macrocells\n")
for module in design.selected_whole_modules_warn():
tbufs = [
cell for cell in module.selected_cells()
if cell.type.str() == "$_TBUF_"
]
for tbuf in tbufs:
tbuf_output = get_cell_port(tbuf, ID_PORT_Y)
tbuf_enable = get_cell_port(tbuf, ID_PORT_E)
print(
f"TBUF {sigspec_str(tbuf_output)}, enable = {sigspec_str(tbuf_enable)}"
)
print(f" -- Number of TBUFS: {len(tbufs)}")
for wire in module.wires_.values():
print(
f"Wire {wire.name.str()} offset {wire.start_offset} port_id {wire.port_id} input {wire.port_input} output {wire.port_output}"
)
output_wires = [
wire for wire in module.wires_.values() if wire.port_output
]
print(f" -- Number of output wires (ports): {len(output_wires)}")
i_wires = [
wire for wire in module.wires_.values()
if self.is_input_pin(wire)
]
o_wires = [
wire for wire in module.wires_.values()
if self.is_output_pin(wire)
]
print(f" -- Input wires: {len(i_wires)}")
print(f" -- Output wires: {len(o_wires)}")
i_ports = []
o_ports = []
for conn_from, conn_to in module.connections_:
if not conn_from.is_wire() or not conn_to.is_wire():
continue
conn_from_name = conn_from.as_wire().name.str()
conn_to_name = conn_to.as_wire().name.str()
if self.is_input_pin(conn_from.as_wire()):
i_ports.append(conn_to_name)
if self.is_output_pin(conn_from.as_wire()):
o_ports.append(conn_to_name)
if self.is_input_pin(conn_to.as_wire()):
i_ports.append(conn_from_name)
if self.is_output_pin(conn_to.as_wire()):
o_ports.append(conn_from_name)
print(f" -- Input ports: {i_ports}")
print(f" -- Output ports: {o_ports}")
for wire in output_wires:
n = wire.name.str().split("_")[1]
mc = self.device.gpiobuf_to_mc[int(n)]
new_cell = module.addCell(
module.uniquify(ys.IdString(f"$mc{n}")),
ys.IdString("$__macrocell"))
new_cell.set_string_attribute(ys.IdString("$gpiobuf"), n)
new_cell.set_string_attribute(ID_ATTR_MC, mc)
if wire.name.str() in i_ports:
new_cell.setPort(ID_PORT_PAD, ys.SigSpec(wire))
new_cell.setPort(ID_PORT_IO_EN, ys.SigSpec(ys.State.S0))
new_cell.set_string_attribute(ID_ATTR_IO_FUNC, "input")
self.device.input_mcs[wire.name.str()] = mc
self.device.input_sigs[wire.name.str()] = f"M{mc}_PAD"
else:
new_cell.setPort(ID_PORT_IO_A, ys.SigSpec(wire))
new_cell.setPort(ID_PORT_IO_EN, ys.SigSpec(ys.State.S1))
new_cell.set_string_attribute(ID_ATTR_IO_FUNC, "output")
self.device.input_mcs[wire.name.str()] = mc
# Remove this MC from the list of available MCs
self.device.available_mcs.remove(mc)
ys.log(
f"Added {len(output_wires)} macrocells ({len(i_ports)} inputs, {len(o_ports)} outputs)\n"
)
def py_execute(self, args, design):
ys.log_header(design, "Splitting overly large $sop cells\n")
threshold = 5
if len(args) > 1:
threshold = int(args[1])
new_cells = 0
cells_to_remove = []
for module in design.selected_whole_modules_warn():
sops = [
cell for cell in module.selected_cells()
if cell.type.str() == "$sop"
]
for sop in sops:
# Depth is the number of product terms
sop_depth = sop.parameters.get(ID_PARAM_DEPTH).as_int()
if sop_depth <= threshold:
continue
cells_to_remove.append(sop)
# Width is the number of inputs
sop_width = sop.parameters.get(ID_PARAM_WIDTH)
# for (int i = 0; i < sop_depth; i++) {
# for (int j = 0; j < sop_width; j++)
# {
# if (sop_table[2 * (i * sop_width + j) + 0])
# {
# and_in_comp.insert(sop_inputs[j]);
# }
# if (sop_table[2 * (i * sop_width + j) + 1])
# {
# and_in_true.insert(sop_inputs[j]);
# }
# }
sop_table = sop.parameters.get(ID_PARAM_TABLE)
sop_inputs = get_cell_port(sop, ID_PORT_A)
sop_output = get_cell_port(sop, ID_PORT_Y)
table = sop_table.as_string()
product_terms = []
print(f"Table is {table}")
for i in range(sop_depth):
offset = 2 * i * sop_width.as_int()
size = 2 * sop_width.as_int()
product_term = table[offset:offset + size]
product_terms.append(product_term)
print(f" Term {i}: {product_term}")
# Rather than create $sops with 5 inputs each and then ORing
# them together in another $sop, we ripple $sops together.
new_output = None
offset = 0
while offset < sop_depth:
is_first = offset == 0
is_last = sop_depth - offset < threshold
# We can fit N inputs into the first $sop, but only
# N-1 inputs into the subsequent $sops because they
# ripple their outputs.
if is_first:
new_inputs = sop_inputs
new_product_terms = product_terms[:threshold]
offset += threshold
else:
new_inputs = sop_inputs
new_product_terms = [
f"{p}00" for p in product_terms[offset:offset +
threshold - 1]
]
additional_product_term = f"{'00'*sop_inputs.size()}01"
new_inputs.append(new_output)
new_product_terms.append(additional_product_term)
offset += threshold - 1
new_width = new_inputs.size()
new_depth = len(new_product_terms)
print(f"New width: {new_width}")
print(f"New depth: {new_depth}")
print(f"New product terms: {''.join(new_product_terms)}")
new_table = ys.Const.from_string(
"".join(new_product_terms))
print(f"new inputs for sop: {sigspec_str(new_inputs)}")
if is_last:
new_output = sop_output
print(f"final output: {sigspec_str(new_output)}")
else:
new_output = ys.SigSpec(
module.addWire(
module.uniquify(
ys.IdString("$smaller_sop_out"))))
print(f"new ripple output: {sigspec_str(new_output)}")
table = new_table.as_string()
print(f"New table: {table}")
for i in range(new_depth):
off = 2 * i * new_width
size = 2 * new_width
product_term = table[off:off + size]
print(f" Term {i}: {product_term}")
new_cell = module.addCell(
module.uniquify(ys.IdString("$smaller_sop")),
ys.IdString("$sop"))
new_cell.setPort(ys.IdString("\\A"), new_inputs)
new_cell.setPort(ID_PORT_Y, new_output)
new_cell.setParam(ys.IdString("\\TABLE"), new_table)
new_cell.setParam(ys.IdString("\\DEPTH"),
ys.Const(new_depth, 32))
new_cell.setParam(ys.IdString("\\WIDTH"),
ys.Const(new_width, 32))
new_cells += 1
for cell in cells_to_remove:
module.remove(cell)
ys.log(
f"Removed {len(cells_to_remove)} overly large $sop cells and replaced with {new_cells} cells.\n"
)