def create_equations(self):
equations = [
Group(equations=[
TaitEOS(dest='fluid', sources=None, rho0=self.ro, c0=self.co,
gamma=7.0),
TaitEOS(dest='tank', sources=None, rho0=self.ro, c0=self.co,
gamma=7.0),
], real=False),
Group(equations=[
ContinuityEquation(
dest='fluid',
sources=['fluid', 'tank', 'cube'],),
ContinuityEquation(
dest='tank',
sources=['fluid', 'tank', 'cube'], ),
MomentumEquation(dest='fluid', sources=['fluid', 'tank'],
alpha=self.alpha, beta=0.0, c0=self.co,
gy=-9.81),
SolidForceOnFluid(dest='fluid', sources=['cube']),
XSPHCorrection(dest='fluid', sources=['fluid', 'tank']),
]),
Group(equations=[
BodyForce(dest='cube', sources=None, gy=-9.81),
FluidForceOnSolid(dest='cube', sources=['fluid']),
# RigidBodyCollision(
# dest='cube',
# sources=['tank'],
# kn=1e5,
# en=0.5, )
]),
Group(equations=[RigidBodyMoments(dest='cube', sources=None)]),
Group(equations=[RigidBodyMotion(dest='cube', sources=None)]),
]
return equations
def create_equations(self):
equations = [
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=1000,
c0=self.co,
gamma=7.0),
TaitEOS(dest='wall',
sources=None,
rho0=1000,
c0=self.co,
gamma=7.0),
],
real=False),
Group(equations=[
ContinuityEquation(dest='fluid', sources=['fluid', 'wall']),
ContinuityEquation(dest='wall', sources=['fluid', 'wall']),
MomentumEquation(dest='fluid',
sources=['fluid', 'wall'],
alpha=self.alpha,
beta=0.0,
c0=self.co,
gy=-9.81),
XSPHCorrection(dest='fluid', sources=['fluid']),
]),
]
return equations
def create_equations(self):
equations = [
Group(equations=[
TaitEOS(dest='fluid', sources=None, rho0=self.ro, c0=self.co,
gamma=7.0),
TaitEOS(dest='tank', sources=None, rho0=self.ro, c0=self.co,
gamma=7.0),
], real=False),
Group(equations=[
SummationDensityShepardFilter(
dest='fluid',
sources=['fluid', 'tank'], ),
# SummationDensityShepardFilter(
# dest='tank',
# sources=['fluid', 'tank'], ),
SummationDensity(
dest='tank',
sources=['fluid', 'tank'], ),
MomentumEquation(dest='fluid', sources=['fluid', 'tank'],
alpha=self.alpha, beta=0.0, c0=self.co,
gy=-9.81),
XSPHCorrection(dest='fluid', sources=['fluid', 'tank']),
]),
]
return equations
def create_equations(self):
equations = [
Group(equations=[
BodyForce(dest='ball', sources=None, gy=gz),
]),
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=self.ro,
c0=self.co,
gamma=7.0),
TaitEOS(dest='wall',
sources=None,
rho0=self.ro,
c0=self.co,
gamma=7.0),
TaitEOS(dest='temp_wall',
sources=None,
rho0=self.ro,
c0=self.co,
gamma=7.0),
],
real=False),
Group(equations=[
ContinuityEquation(
dest='fluid',
sources=['fluid', 'temp_wall', 'wall'],
),
ContinuityEquation(
dest='temp_wall',
sources=['fluid', 'temp_wall', 'wall'],
),
ContinuityEquation(
dest='wall',
sources=['fluid', 'temp_wall', 'wall'],
),
MomentumEquation(dest='fluid',
sources=['fluid', 'wall', 'temp_wall'],
alpha=self.alpha,
beta=0.0,
c0=self.co,
gy=-9.81),
SolidFluidForce(
dest='fluid',
sources=['ball'],
),
XSPHCorrection(dest='fluid',
sources=['fluid', 'temp_wall', 'wall']),
]),
Group(equations=[
RigidBodyCollision(
dest='ball', sources=['ball', 'wall', 'temp_wall'], kn=1e5)
]),
Group(equations=[RigidBodyMoments(dest='ball', sources=None)]),
Group(equations=[RigidBodyMotion(dest='ball', sources=None)]),
]
return equations
def create_equations(self):
adami_equations = [
Group(equations=[
SummationDensity(dest='liquid',
sources=['liquid', 'wall', 'gas']),
SummationDensity(dest='gas', sources=['liquid', 'wall', 'gas'
]),
SummationDensity(dest='wall',
sources=['liquid', 'wall', 'gas'])
]),
Group(equations=[
TaitEOS(dest='liquid',
sources=None,
rho0=rho1,
c0=c0,
gamma=1,
p0=p1),
TaitEOS(
dest='gas', sources=None, rho0=rho2, c0=c0, gamma=1,
p0=p1),
SolidWallPressureBCnoDensity(dest='wall',
sources=['liquid', 'gas']),
]),
Group(equations=[
ColorGradientAdami(dest='liquid',
sources=['liquid', 'wall', 'gas']),
ColorGradientAdami(dest='gas',
sources=['liquid', 'wall', 'gas']),
]),
Group(equations=[
ConstructStressMatrix(
dest='liquid', sources=None, sigma=sigma, d=2),
ConstructStressMatrix(
dest='gas', sources=None, sigma=sigma, d=2)
]),
Group(equations=[
MomentumEquationPressureGradientAdami(
dest='liquid', sources=['liquid', 'wall', 'gas']),
MomentumEquationPressureGradientAdami(
dest='gas', sources=['liquid', 'wall', 'gas']),
MomentumEquationViscosityAdami(dest='liquid',
sources=['liquid', 'gas']),
MomentumEquationViscosityAdami(dest='gas',
sources=['liquid', 'gas']),
SurfaceForceAdami(dest='liquid',
sources=['liquid', 'wall', 'gas']),
SurfaceForceAdami(dest='gas',
sources=['liquid', 'wall', 'gas']),
SolidWallNoSlipBC(dest='liquid', sources=['wall'], nu=nu1),
SolidWallNoSlipBC(dest='gas', sources=['wall'], nu=nu2),
]),
]
return adami_equations
def create_equations(self):
equations = [
Group(
equations=[
BodyForce(dest='cube', sources=None, gy=-9.81),
# NumberDensity(dest='cube', sources=['cube']),
],
real=False),
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=self.ro,
c0=self.co,
gamma=7.0),
TaitEOS(dest='tank',
sources=None,
rho0=self.ro,
c0=self.co,
gamma=7.0),
],
real=False),
Group(equations=[
ContinuityEquation(
dest='fluid',
sources=['fluid', 'tank', 'cube'],
),
ContinuityEquation(
dest='tank',
sources=['fluid', 'tank', 'cube'],
),
MomentumEquation(dest='fluid',
sources=['fluid', 'tank'],
alpha=self.alpha,
beta=0.0,
c0=self.co,
gy=-9.81),
SolidFluidForce(
dest='fluid',
sources=['cube'],
),
# PressureRigidBody(dest='fluid', sources=['cube'],
# rho0=1500),
XSPHCorrection(dest='fluid', sources=['fluid', 'tank']),
]),
Group(equations=[
RigidBodyCollision(dest='cube', sources=['tank'], kn=1e5)
]),
Group(equations=[RigidBodyMoments(dest='cube', sources=None)]),
Group(equations=[RigidBodyMotion(dest='cube', sources=None)]),
]
return equations
def get_equations(self):
from pysph.sph.basic_equations import XSPHCorrection
from pysph.sph.wc.basic import TaitEOS
from pysph.sph.wc.viscosity import LaminarViscosity
all = self.fluids
equations = []
eq0 = []
for fluid in self.fluids:
eq0.append(CRKSPHPreStep(dest=fluid, sources=all, dim=2))
equations.append(Group(equations=eq0, real=False))
eq1 = []
for fluid in self.fluids:
eq1.append(NumberDensity(dest=fluid, sources=all))
equations.append(Group(equations=eq1, real=False))
eq2 = []
for fluid in self.fluids:
eq2.extend([
CRKSPH(dest=fluid, sources=all, dim=self.dim, tol=self.tol),
SummationDensityCRKSPH(dest=fluid, sources=all)
])
equations.append(Group(equations=eq2, real=False))
eq3 = []
for fluid in self.fluids:
eq3.append(
TaitEOS(dest=fluid, sources=None, rho0=self.rho0, c0=self.c0,
p0=self.p0, gamma=self.gamma))
equations.append(Group(equations=eq3, real=False))
eq4 = []
for fluid in self.fluids:
eq4.extend([
CRKSPH(dest=fluid, sources=all, dim=self.dim, tol=self.tol),
VelocityGradient(dest=fluid, sources=all, dim=self.dim)
])
equations.append(Group(equations=eq4))
eq5 = []
for fluid in self.fluids:
eq5.extend([
CRKSPHSymmetric(dest=fluid, sources=all, dim=self.dim,
tol=self.tol),
MomentumEquation(
dest=fluid, sources=all, dim=self.dim, gx=self.gx,
gy=self.gy, gz=self.gz, cl=self.cl, cq=self.cq,
eta_crit=self.eta_crit, eta_fold=self.eta_fold
),
XSPHCorrection(dest=fluid, sources=all)
])
if abs(self.nu) > 1e-14:
eq5.append(LaminarViscosity(
dest=fluid, sources=self.fluids, nu=self.nu
))
equations.append(Group(equations=eq5))
return equations
def create_equations(self):
adami_equations = [
Group(equations=[
SummationDensity(dest='fluid', sources=['fluid', 'wall']),
SummationDensity(dest='wall', sources=['fluid', 'wall']),
# Density_correction(dest='wall', sources=['fluid', 'wall']),
]),
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=rho1,
c0=c0,
gamma=7,
p0=p1),
SolidWallPressureBCnoDensity(dest='wall', sources=['fluid']),
]),
Group(equations=[
ColorGradientAdami(dest='fluid', sources=['fluid', 'wall']),
]),
Group(equations=[
ConstructStressMatrix(
dest='fluid', sources=None, sigma=sigma, d=2)
]),
Group(equations=[
MomentumEquationPressureGradientAdami(
dest='fluid', sources=['fluid', 'wall']),
# MomentumEquation(dest='fluid', sources=['fluid', 'wall'], c0=c0, alpha=0.0, beta=0.0, tensile_correction=True),
MomentumEquationViscosityAdami(dest='fluid', sources=['fluid']
),
SurfaceForceAdami(dest='fluid', sources=['fluid', 'wall']),
SolidWallNoSlipBC(dest='fluid', sources=['wall'], nu=nu0)
]),
]
return adami_equations
def setUp(self):
from pysph.sph.basic_equations import SummationDensity
from pysph.sph.wc.basic import TaitEOS
self.group = CythonGroup(
[SummationDensity('f', ['f']),
TaitEOS('f', None, rho0=1.0, c0=1.0, gamma=1.4, p0=1.0)]
)
def create_equations(self):
equations = [
Group(equations=[
LiuFluidForce(
dest='fluid',
sources=None,
),
XSPHCorrection(dest='fluid', sources=[
'fluid',
]),
TaitEOS(dest='fluid',
sources=None,
rho0=1000,
c0=1498,
gamma=7.0),
],
real=False),
Group(equations=[
ContinuityEquation(dest='fluid', sources=[
'fluid',
]),
MomentumEquation(dest='fluid',
sources=['fluid'],
alpha=0.1,
beta=0.0,
c0=1498,
gy=-9.81),
XSPHCorrection(dest='fluid', sources=['fluid']),
]),
]
return equations
def create_equations(self):
"""Set up equations.
Body force is necessary to reset fx,fy,fz, although
not body force is applied.
"""
equations = [
Group(equations=[
BodyForce(dest='ellipsoid', sources=None),
NumberDensity(dest='ellipsoid', sources=['ellipsoid']),
NumberDensity(dest='walls', sources=['walls'])
]),
# Tait equation of state
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=self.rho,
c0=self.co,
gamma=7.0),
TaitEOSHGCorrection(dest='ellipsoid',
sources=None,
rho0=self.rho,
c0=self.co,
gamma=7.0),
TaitEOSHGCorrection(dest='walls',
sources=None,
rho0=self.rho,
c0=self.co,
gamma=7.0),
],
real=False),
Group(equations=[
ContinuityEquation(dest='fluid',
sources=['fluid', 'walls', 'ellipsoid']),
ContinuityEquation(dest='ellipsoid', sources=['fluid']),
ContinuityEquation(dest='walls', sources=['fluid']),
LaminarViscosity(
dest='fluid', sources=['fluid', 'walls'], nu=self.nu),
MomentumEquation(dest='fluid',
sources=['fluid', 'walls'],
alpha=self.alpha,
beta=0.0,
c0=self.co),
ViscosityRigidBody(dest='fluid',
sources=['ellipsoid'],
nu=self.nu,
rho0=self.rho),
PressureRigidBody(dest='fluid',
sources=['ellipsoid'],
rho0=self.rho),
XSPHCorrection(dest='fluid', sources=['fluid']),
]),
Group(
equations=[RigidBodyMoments(dest='ellipsoid', sources=None)]),
Group(equations=[RigidBodyMotion(dest='ellipsoid', sources=None)]),
]
return equations
def create_equations(self):
morris_equations = [
Group(equations=[
SummationDensitySourceMass(dest='fluid',
sources=['fluid', 'wall']),
SummationDensitySourceMass(dest='wall',
sources=['fluid', 'wall']),
]),
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=rho1,
c0=c0,
gamma=1,
p0=p1),
SolidWallPressureBCnoDensity(
dest='wall', sources=['fluid'], rho0=rho1, p0=p1),
SmoothedColor(dest='fluid', sources=['fluid', 'wall']),
SmoothedColor(dest='wall', sources=['fluid', 'wall']),
]),
Group(equations=[
MorrisColorGradient(
dest='fluid', sources=['fluid', 'wall'], epsilon=epsilon),
]),
Group(equations=[
FindMaxddelta(dest='fluid', sources=None),
]),
Group(equations=[
MomentumEquationPressureGradientMorris(
dest='fluid', sources=['fluid', 'wall']),
MomentumEquationViscosityMorris(dest='fluid',
sources=['fluid']),
CSFSurfaceTensionForce(
dest='fluid', sources=['fluid', 'wall'], sigma=sigma),
SolidWallNoSlipBC(dest='fluid', sources=['wall'], nu=nu0)
]),
]
return morris_equations
def create_equations(self):
print("Create our own equations.")
equations = [
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=self.ro,
c0=self.co,
gamma=7.0),
],
real=False),
Group(equations=[
ContinuityEquation(dest='fluid', sources=['fluid']),
MomentumEquation(dest='fluid',
sources=['fluid'],
alpha=self.alpha,
beta=0.0,
c0=self.co),
XSPHCorrection(dest='fluid', sources=['fluid']),
]),
]
return equations
def create_equations(self):
morris_equations = [
Group(equations=[
SummationDensitySourceMass(
dest='fluid', sources=[
'fluid', 'wall']),
SummationDensitySourceMass(
dest='wall', sources=[
'fluid', 'wall']),
]),
Group(equations=[
TaitEOS(dest='fluid', sources=None, rho0=rho0, c0=c0, gamma=1, p0=0.0),
SolidWallPressureBCnoDensity(dest='wall', sources=['fluid']),
SmoothedColor(
dest='fluid', sources=[
'fluid', 'wall']),
SmoothedColor(
dest='wall', sources=[
'fluid', 'wall']),
]),
Group(equations=[
MorrisColorGradient(dest='fluid', sources=['fluid', 'wall'],
epsilon=epsilon),
]),
Group(equations=[
InterfaceCurvatureFromDensity(dest='fluid', sources=['fluid', 'wall'],
with_morris_correction=True),
]),
Group(
equations=[
# MomentumEquation(dest='fluid', sources=['fluid', 'wall'], c0=c0, tensile_correction=False, alpha=0.0, beta=0.0),
MomentumEquationPressureGradientMorris(dest='fluid', sources=['fluid', 'wall']),
MomentumEquationViscosityMorris(dest='fluid', sources=['fluid']),
CSFSurfaceTensionForce(
dest='fluid', sources=None, sigma=sigma),
SolidWallNoSlipBC(dest='fluid', sources=['wall'], nu=nu0)
]),
]
return morris_equations
def create_equations(self):
equations = [
# Equation of state
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
TaitEOSHGCorrection(dest='boundary',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
],
real=False),
# Continuity Momentum and XSPH equations
Group(equations=[
ContinuityEquation(dest='fluid', sources=['fluid', 'boundary'
]),
ContinuityEquation(dest='boundary', sources=['fluid']),
MomentumEquation(dest='fluid',
sources=['fluid', 'boundary'],
c0=c0,
alpha=alpha,
beta=beta,
gz=-9.81,
tensile_correction=True),
# Position step with XSPH
XSPHCorrection(dest='fluid', sources=['fluid'], eps=eps)
])
]
return equations
def get_equations(self):
from pysph.sph.equation import Group
from pysph.sph.wc.basic import TaitEOS
from pysph.sph.basic_equations import XSPHCorrection
from pysph.sph.wc.transport_velocity import (
ContinuityEquation, MomentumEquationPressureGradient,
MomentumEquationViscosity, MomentumEquationArtificialViscosity,
SolidWallPressureBC, SolidWallNoSlipBC, SetWallVelocity,
VolumeSummation)
equations = []
all = self.fluids + self.solids
g2 = []
for fluid in self.fluids:
g2.append(VolumeSummation(dest=fluid, sources=all))
g2.append(
TaitEOS(dest=fluid,
sources=None,
rho0=self.rho0,
c0=self.c0,
gamma=self.gamma,
p0=self.p0))
for solid in self.solids:
g2.append(VolumeSummation(dest=solid, sources=all))
g2.append(SetWallVelocity(dest=solid, sources=self.fluids))
equations.append(Group(equations=g2, real=False))
g3 = []
for solid in self.solids:
g3.append(
SolidWallPressureBC(dest=solid,
sources=self.fluids,
b=1.0,
rho0=self.rho0,
p0=self.B,
gx=self.gx,
gy=self.gy,
gz=self.gz))
equations.append(Group(equations=g3, real=False))
g4 = []
for fluid in self.fluids:
g4.append(ContinuityEquation(dest=fluid, sources=all))
g4.append(
MomentumEquationPressureGradient(dest=fluid,
sources=all,
pb=0.0,
gx=self.gx,
gy=self.gy,
gz=self.gz,
tdamp=self.tdamp))
if self.alpha > 0.0:
g4.append(
MomentumEquationArtificialViscosity(dest=fluid,
sources=all,
c0=self.c0,
alpha=self.alpha))
if self.nu > 0.0:
g4.append(
MomentumEquationViscosity(dest=fluid,
sources=self.fluids,
nu=self.nu))
if len(self.solids) > 0:
g4.append(
SolidWallNoSlipBC(dest=fluid,
sources=self.solids,
nu=self.nu))
g4.append(XSPHCorrection(dest=fluid, sources=[fluid]))
equations.append(Group(equations=g4))
return equations
def get_equations(self):
from pysph.sph.equation import Group
from pysph.sph.wc.basic import (MomentumEquation, TaitEOS,
TaitEOSHGCorrection,
UpdateSmoothingLengthFerrari)
from pysph.sph.wc.basic import (ContinuityEquationDeltaSPH,
MomentumEquationDeltaSPH)
from pysph.sph.basic_equations import \
(ContinuityEquation, SummationDensity, XSPHCorrection)
from pysph.sph.wc.viscosity import LaminarViscosity
equations = []
g1 = []
all = self.fluids + self.solids
if self.summation_density:
g0 = []
for name in self.fluids:
g0.append(SummationDensity(dest=name, sources=all))
equations.append(Group(equations=g0, real=False))
for name in self.fluids:
g1.append(
TaitEOS(dest=name,
sources=None,
rho0=self.rho0,
c0=self.c0,
gamma=self.gamma))
if self.hg_correction:
# This correction applies only to solids.
for name in self.solids:
g1.append(
TaitEOSHGCorrection(dest=name,
sources=None,
rho0=self.rho0,
c0=self.c0,
gamma=self.gamma))
equations.append(Group(equations=g1, real=False))
g2 = []
for name in self.solids:
g2.append(ContinuityEquation(dest=name, sources=self.fluids))
for name in self.fluids:
if self.delta_sph:
other = all[:]
other.remove(name)
g2.append(
ContinuityEquationDeltaSPH(dest=name,
sources=[name],
c0=self.c0,
delta=self.delta))
if len(other) > 0:
g2.append(ContinuityEquation(dest=name, sources=other))
g2.append(
MomentumEquationDeltaSPH(
dest=name,
sources=[name],
rho0=self.rho0,
c0=self.c0,
alpha=self.alpha,
gx=self.gx,
gy=self.gy,
gz=self.gz,
))
if len(other) > 0:
g2.append(
MomentumEquation(
dest=name,
sources=other,
c0=self.c0,
alpha=self.alpha,
beta=self.beta,
gx=self.gx,
gy=self.gy,
gz=self.gz,
tensile_correction=self.tensile_correction))
g2.append(XSPHCorrection(dest=name, sources=[name]))
else:
if not self.summation_density:
g2.append(ContinuityEquation(dest=name, sources=all))
g2.extend([
MomentumEquation(
dest=name,
sources=all,
alpha=self.alpha,
beta=self.beta,
gx=self.gx,
gy=self.gy,
gz=self.gz,
c0=self.c0,
tensile_correction=self.tensile_correction),
XSPHCorrection(dest=name, sources=[name])
])
if abs(self.nu) > 1e-14:
eq = LaminarViscosity(dest=name,
sources=self.fluids,
nu=self.nu)
g2.insert(-1, eq)
equations.append(Group(equations=g2))
if self.update_h:
g3 = [
UpdateSmoothingLengthFerrari(dest=x,
sources=None,
dim=self.dim,
hdx=self.hdx) for x in self.fluids
]
equations.append(Group(equations=g3, real=False))
return equations
def get_surface_tension_equations(fluids, solids, scheme, rho0, p0, c0, b,
factor1, factor2, nu, sigma, d, epsilon,
gamma, real=False):
"""
This function returns the required equations for the multiphase
formulation taking inputs of the fluid particles array, solid particles
array, the scheme to be used and other physical parameters
Parameters
------------------
fluids: list
List of names of fluid particle arrays
solids: list
List of names of solid particle arrays
scheme: string
The scheme with which the equations are to be setup.
Supported Schemes:
1. TVF scheme with Morris' surface tension.
String to be used: "tvf"
2. Adami's surface tension implementation which doesn't involve
calculation of curvature. String to be used: "adami_stress"
3. Adami's surface tension implementation which involves
calculation of curvature. String to be used: "adami"
4. Shadloo Yildiz surface tension formulation.
String to be used: "shadloo"
5. Morris' surface tension formulation. This is the default scheme
which will be used if none of the above strings are input as
scheme.
rho0 : float
The reference density of the medium (Currently multiple reference
densities for different particles is not supported)
p0 : float
The background pressure of the medium(Currently multiple background
pressures for different particles is not supported)
c0 : float
The speed of sound of the medium(Currently multiple speeds of sounds
for different particles is not supported)
b : float
The b parameter of the generalized Tait Equation of State. Refer to
the Tait Equation's documentation for reference
factor1 : float
The factor for scaling of smoothing length for calculation of
interface curvature number for shadloo's scheme
factor2 : float
The factor for scaling back of smoothing length for calculation of
forces after calculating the interface curvature number in shadloo's
scheme
nu : float
The kinematic viscosity of the medium
sigma : float
The surface tension of the system
d : int
The number of dimensions of the problem in the cartesian space
epsilon: float
Put this option false if the equations are supposed to be evaluated
for the ghost particles, else keep it True
"""
if scheme == 'tvf':
result = []
equations = []
for i in fluids+solids:
equations.append(SummationDensity(dest=i, sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(StateEquation(dest=i, sources=None, rho0=rho0,
p0=p0))
equations.append(SmoothedColor(dest=i, sources=fluids+solids))
for i in solids:
equations.append(SolidWallPressureBCnoDensity(dest=i,
sources=fluids))
equations.append(SmoothedColor(dest=i, sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(MorrisColorGradient(dest=i, sources=fluids+solids,
epsilon=epsilon))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(InterfaceCurvatureFromNumberDensity(
dest=i, sources=fluids+solids, with_morris_correction=True))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(MomentumEquationPressureGradient(dest=i,
sources=fluids+solids, pb=p0))
equations.append(MomentumEquationViscosity(dest=i, sources=fluids,
nu=nu))
equations.append(CSFSurfaceTensionForce(dest=i, sources=None,
sigma=sigma))
equations.append(MomentumEquationArtificialStress(dest=i,
sources=fluids))
if len(solids) != 0:
equations.append(SolidWallNoSlipBC(dest=i, sources=solids,
nu=nu))
result.append(Group(equations))
elif scheme == 'adami_stress':
result = []
equations = []
for i in fluids+solids:
equations.append(SummationDensity(dest=i, sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(TaitEOS(dest=i, sources=None, rho0=rho0, c0=c0,
gamma=gamma, p0=p0))
for i in solids:
equations.append(SolidWallPressureBCnoDensity(dest=i,
sources=fluids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(ColorGradientAdami(dest=i, sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(ConstructStressMatrix(dest=i, sources=None,
sigma=sigma, d=d))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(MomentumEquationPressureGradientAdami(dest=i,
sources=fluids+solids))
equations.append(MomentumEquationViscosityAdami(dest=i,
sources=fluids))
equations.append(SurfaceForceAdami(dest=i, sources=fluids+solids))
if len(solids) != 0:
equations.append(SolidWallNoSlipBC(dest=i, sources=solids,
nu=nu))
result.append(Group(equations))
elif scheme == 'adami':
result = []
equations = []
for i in fluids+solids:
equations.append(SummationDensity(dest=i, sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(StateEquation(dest=i, sources=None, rho0=rho0,
p0=p0, b=b))
for i in solids:
equations.append(SolidWallPressureBCnoDensity(dest=i,
sources=fluids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(AdamiColorGradient(dest=i, sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(AdamiReproducingDivergence(dest=i,
sources=fluids+solids,
dim=d))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(MomentumEquationPressureGradient(
dest=i, sources=fluids+solids, pb=0.0))
equations.append(MomentumEquationViscosityAdami(dest=i,
sources=fluids))
equations.append(CSFSurfaceTensionForceAdami(dest=i, sources=None))
if len(solids) != 0:
equations.append(SolidWallNoSlipBC(dest=i, sources=solids,
nu=nu))
result.append(Group(equations))
elif scheme == 'shadloo':
result = []
equations = []
for i in fluids+solids:
equations.append(SummationDensity(dest=i, sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(StateEquation(dest=i, sources=None, rho0=rho0,
p0=p0, b=b))
equations.append(SY11ColorGradient(dest=i, sources=fluids+solids))
for i in solids:
equations.append(SolidWallPressureBCnoDensity(dest=i,
sources=fluids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(ScaleSmoothingLength(dest=i, sources=None,
factor=factor1))
result.append(Group(equations, real=real, update_nnps=True))
equations = []
for i in fluids:
equations.append(SY11DiracDelta(dest=i, sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(InterfaceCurvatureFromNumberDensity(
dest=i, sources=fluids+solids, with_morris_correction=True))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(ScaleSmoothingLength(dest=i, sources=None,
factor=factor2))
result.append(Group(equations, real=real, update_nnps=True))
equations = []
for i in fluids:
equations.append(MomentumEquationPressureGradient(
dest=i, sources=fluids+solids, pb=0.0))
equations.append(MomentumEquationViscosity(dest=i, sources=fluids,
nu=nu))
equations.append(ShadlooYildizSurfaceTensionForce(dest=i,
sources=None,
sigma=sigma))
if len(solids) != 0:
equations.append(SolidWallNoSlipBC(dest=i, sources=solids,
nu=nu))
result.append(Group(equations))
else:
result = []
equations = []
for i in fluids+solids:
equations.append(SummationDensitySourceMass(dest=i,
sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(TaitEOS(dest=i, sources=None, rho0=rho0, c0=c0,
gamma=gamma, p0=0.0))
equations.append(SmoothedColor(dest=i, sources=fluids+solids))
for i in solids:
equations.append(SolidWallPressureBCnoDensity(dest=i,
sources=fluids))
equations.append(SmoothedColor(dest=i, sources=fluids+solids))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(MorrisColorGradient(dest=i, sources=fluids+solids,
epsilon=epsilon))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(InterfaceCurvatureFromDensity(
dest=i, sources=fluids+solids, with_morris_correction=True))
result.append(Group(equations, real=real))
equations = []
for i in fluids:
equations.append(MomentumEquationPressureGradientMorris(dest=i,
sources=fluids+solids))
equations.append(MomentumEquationViscosityMorris(dest=i,
sources=fluids))
equations.append(CSFSurfaceTensionForce(dest=i, sources=None,
sigma=sigma))
if len(solids) != 0:
equations.append(SolidWallNoSlipBC(dest=i, sources=solids,
nu=nu))
result.append(Group(equations))
return result
def create_equations(self):
morris_equations = [
Group(equations=[
SummationDensity(dest='fluid', sources=['fluid']),
],
real=False,
update_nnps=False),
Group(
equations=[
# IsothermalEOS(
# dest='fluid',
# sources=None,
# rho0=rho1,
# p0=0.0,
# c0=c0),
TaitEOS(dest='fluid',
sources=None,
rho0=rho1,
c0=c0,
gamma=1.0,
p0=p1),
SmoothedColor(dest='fluid', sources=[
'fluid',
]),
# ScaleSmoothingLength(dest='fluid', sources=None, factor=2.0/3.0),
],
real=True,
update_nnps=True),
Group(
equations=[
MorrisColorGradient(dest='fluid',
sources=[
'fluid',
],
epsilon=epsilon),
# ScaleSmoothingLength(dest='fluid', sources=None, factor=1.5),
],
real=False,
update_nnps=False),
# Group(equations=[
# InterfaceCurvatureFromNumberDensity(dest='fluid', sources=['fluid'],
# with_morris_correction=True),
# ], real=False, update_nnps=False),
Group(equations=[
FindMaxddelta(dest='fluid', sources=None),
]),
Group(equations=[
MomentumEquationPressureGradient(dest='fluid',
sources=['fluid']),
MomentumEquationViscosity(dest='fluid', sources=['fluid']),
],
real=False,
update_nnps=False),
Group(equations=[
CSFSurfaceTensionForce(dest='fluid', sources=['fluid']),
],
real=False,
update_nnps=False)
]
return morris_equations
def create_equations(self):
# Formulation for REF1
equations1 = [
# For the multi-phase formulation, we require an estimate of the
# particle volume. This can be either defined from the particle
# number density or simply as the ratio of mass to density.
Group(equations=[
VolumeFromMassDensity(dest='fluid', sources=None)
], ),
# Equation of state is typically the Tait EOS with a suitable
# exponent gamma
Group(equations=[
TaitEOS(
dest='fluid',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
], ),
# The boundary conditions are imposed by extrapolating the fluid
# pressure, taking into considering the bounday acceleration
Group(equations=[
SolidWallPressureBC(dest='solid', sources=['fluid'], b=1.0, gy=gy,
rho0=rho0, p0=p0),
], ),
# Main acceleration block
Group(equations=[
# Continuity equation
ContinuityEquation(
dest='fluid', sources=[
'fluid', 'solid']),
# Pressure gradient with acceleration damping.
MomentumEquationPressureGradient(
dest='fluid', sources=['fluid', 'solid'], pb=0.0, gy=gy,
tdamp=tdamp),
# artificial viscosity for stability
MomentumEquationArtificialViscosity(
dest='fluid', sources=['fluid', 'solid'], alpha=0.24, c0=c0),
# Position step with XSPH
XSPHCorrection(dest='fluid', sources=['fluid'], eps=0.0)
]),
]
# Formulation for REF2. Note that for this formulation to work, the
# boundary particles need to have a spacing different from the fluid
# particles (usually determined by a factor beta). In the current
# implementation, the value is taken as 1.0 which will mostly be
# ineffective.
equations2 = [
# For the multi-phase formulation, we require an estimate of the
# particle volume. This can be either defined from the particle
# number density or simply as the ratio of mass to density.
Group(equations=[
VolumeFromMassDensity(dest='fluid', sources=None)
], ),
# Equation of state is typically the Tait EOS with a suitable
# exponent gamma
Group(equations=[
TaitEOS(
dest='fluid',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
], ),
# Main acceleration block
Group(equations=[
# The boundary conditions are imposed as a force or
# accelerations on the fluid particles. Note that the
# no-penetration condition is to be satisfied with this
# equation. The subsequent equations therefore do not have
# solid as the source. Note the difference between the
# ghost-fluid formulations. K should be 0.01*co**2
# according to REF2. We take it much smaller here on
# account of the multiple layers of boundary particles
MonaghanKajtarBoundaryForce(dest='fluid', sources=['solid'],
K=0.02, beta=1.0, h=hdx * dx),
# Continuity equation
ContinuityEquation(dest='fluid', sources=['fluid', ]),
# Pressure gradient with acceleration damping.
MomentumEquationPressureGradient(
dest='fluid', sources=['fluid'], pb=0.0, gy=gy,
tdamp=tdamp),
# artificial viscosity for stability
MomentumEquationArtificialViscosity(
dest='fluid', sources=['fluid'], alpha=0.25, c0=c0),
# Position step with XSPH
XSPHCorrection(dest='fluid', sources=['fluid'], eps=0.0)
]),
]
# Formulation for REF3
equations3 = [
# For the multi-phase formulation, we require an estimate of the
# particle volume. This can be either defined from the particle
# number density or simply as the ratio of mass to density.
Group(equations=[
VolumeFromMassDensity(dest='fluid', sources=None)
], ),
# Equation of state is typically the Tait EOS with a suitable
# exponent gamma. The solid phase is treated just as a fluid and
# the pressure and density operations is updated for this as well.
Group(equations=[
TaitEOS(
dest='fluid',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
TaitEOS(
dest='solid',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
], ),
# Main acceleration block. The boundary conditions are imposed by
# peforming the continuity equation and gradient of pressure
# calculation on the solid phase, taking contributions from the
# fluid phase
Group(equations=[
# Continuity equation
ContinuityEquation(
dest='fluid', sources=[
'fluid', 'solid']),
ContinuityEquation(dest='solid', sources=['fluid']),
# Pressure gradient with acceleration damping.
MomentumEquationPressureGradient(
dest='fluid', sources=['fluid', 'solid'], pb=0.0, gy=gy,
tdamp=tdamp),
# artificial viscosity for stability
MomentumEquationArtificialViscosity(
dest='fluid', sources=['fluid', 'solid'], alpha=0.25, c0=c0),
# Position step with XSPH
XSPHCorrection(dest='fluid', sources=['fluid'], eps=0.5)
]),
]
if self.options.bc_type == 1:
return equations1
elif self.options.bc_type == 2:
return equations2
elif self.options.bc_type == 3:
return equations3
def create_equations(self):
# Formulation for REF1
# (using only first set of equations for simplicity)
equations = [
Group(equations=[
DiffuseMaterial(dest='fluid',
sources=['fluid'],
diffusion_speed=0.1)
], ),
# For the multi-phase formulation, we require an estimate of the
# particle volume. This can be either defined from the particle
# number density or simply as the ratio of mass to density
Group(
equations=[VolumeFromMassDensity(dest='fluid',
sources=None)], ),
# Equation of state is typically the Tait EOS with a suitable
# exponent gamma
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
], ),
# The boundary conditions are imposed by extrapolating the fluid
# pressure, taking into consideration the boundary acceleration
Group(equations=[
SolidWallPressureBC(dest='solid',
sources=['fluid'],
b=1.0,
gy=gravity_y,
rho0=rho0,
p0=p0)
], ),
# Main acceleration block
Group(equations=[
# Continuity equation
ContinuityEquation(dest='fluid', sources=['fluid', 'solid']),
# Pressure gradient with acceleration damping
MomentumEquationPressureGradient(dest='fluid',
sources=['fluid', 'solid'],
pb=0.0,
gy=gravity_y,
tdamp=tdamp),
# artificial viscosity for stability
MomentumEquationArtificialViscosity(dest='fluid',
sources=['fluid', 'solid'],
alpha=0.24,
c0=c0),
# Position step with XSPH
XSPHCorrection(dest='fluid', sources=['fluid'], eps=0.0)
]),
]
return equations
def create_equations(self):
equations = [
Group(equations=[
BodyForce(dest='block', sources=None, gy=gy),
NumberDensity(dest='block', sources=['block']),
NumberDensity(dest='solid', sources=['solid']),
], ),
# Equation of state is typically the Tait EOS with a suitable
# exponent gamma
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
TaitEOSHGCorrection(dest='solid',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
TaitEOSHGCorrection(dest='block',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
], ),
# Main acceleration block
Group(equations=[
# Continuity equation with dissipative corrections for fluid on fluid
ContinuityEquationDeltaSPH(
dest='fluid', sources=['fluid'], c0=c0, delta=0.1),
ContinuityEquation(dest='fluid', sources=['solid', 'block']),
ContinuityEquation(dest='solid', sources=['fluid']),
ContinuityEquation(dest='block', sources=['fluid']),
# Momentum equation
MomentumEquation(dest='fluid',
sources=['fluid', 'solid', 'block'],
alpha=alpha,
beta=beta,
gy=-9.81,
c0=c0,
tensile_correction=True),
PressureRigidBody(dest='fluid',
sources=['block', 'solid'],
rho0=rho0),
ViscosityRigidBody(
dest='fluid', sources=['block', 'solid'
], rho0=rho0, nu=nu),
# Position step with XSPH
XSPHCorrection(dest='fluid', sources=['fluid']),
RigidBodyCollision(dest='block',
sources=['solid'],
k=1.0,
d=2.0,
eta=0.1,
kt=0.1),
]),
Group(equations=[RigidBodyMoments(dest='block', sources=None)]),
Group(equations=[RigidBodyMotion(dest='block', sources=None)]),
]
return equations
# Create a solver. The damping is performed for the first 50 iterations.
solver = Solver(kernel=kernel,
dim=dim,
integrator=integrator,
dt=dt,
tf=tf,
adaptive_timestep=True,
n_damp=50,
fixed_h=False)
# create the equations
equations = [
# Equation of state
Group(equations=[
TaitEOS(dest='fluid', sources=None, rho0=ro, c0=co, gamma=gamma),
TaitEOSHGCorrection(dest='boundary',
sources=None,
rho0=ro,
c0=co,
gamma=gamma),
],
real=False),
Group(equations=[
# Continuity equation with dissipative corrections for fluid on fluid
ContinuityEquationDeltaSPH(
dest='fluid', sources=['fluid'], c0=co, delta=0.1),
ContinuityEquation(dest='fluid', sources=['boundary']),
ContinuityEquation(dest='boundary', sources=['fluid']),
def create_equations(self):
sy11_equations = [
Group(
equations=[SummationDensity(dest='fluid', sources=['fluid'])],
real=False),
Group(equations=[
StateEquation(dest='fluid', sources=None, rho0=rho0, p0=p0),
SY11ColorGradient(dest='fluid', sources=['fluid'])
],
real=False),
Group(equations=[
ScaleSmoothingLength(dest='fluid',
sources=None,
factor=factor1)
],
real=False,
update_nnps=True),
Group(equations=[SY11DiracDelta(dest='fluid', sources=['fluid'])],
real=False),
Group(equations=[
InterfaceCurvatureFromNumberDensity(
dest='fluid',
sources=['fluid'],
with_morris_correction=True),
],
real=False),
Group(
equations=[
ScaleSmoothingLength(dest='fluid',
sources=None,
factor=factor2)
],
real=False,
update_nnps=True,
),
Group(equations=[
MomentumEquationPressureGradient(dest='fluid',
sources=['fluid'],
pb=0.0),
MomentumEquationViscosity(dest='fluid',
sources=['fluid'],
nu=nu),
ShadlooYildizSurfaceTensionForce(dest='fluid',
sources=None,
sigma=sigma),
], )
]
adami_equations = [
Group(
equations=[SummationDensity(dest='fluid', sources=['fluid'])],
real=False),
Group(equations=[
StateEquation(dest='fluid', sources=None, rho0=rho0, p0=p0),
],
real=False),
Group(equations=[
AdamiColorGradient(dest='fluid', sources=['fluid']),
],
real=False),
Group(equations=[
AdamiReproducingDivergence(dest='fluid',
sources=['fluid'],
dim=2),
],
real=False),
Group(equations=[
MomentumEquationPressureGradient(dest='fluid',
sources=['fluid'],
pb=p0),
MomentumEquationViscosityAdami(dest='fluid',
sources=['fluid']),
CSFSurfaceTensionForceAdami(
dest='fluid',
sources=None,
)
], )
]
adami_stress_equations = [
Group(equations=[
SummationDensity(dest='fluid', sources=['fluid']),
],
real=False),
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=rho0,
c0=c0,
gamma=7,
p0=p0),
],
real=False),
Group(equations=[
ColorGradientAdami(dest='fluid', sources=['fluid']),
],
real=False),
Group(equations=[
ConstructStressMatrix(dest='fluid',
sources=None,
sigma=sigma,
d=2)
],
real=False),
Group(equations=[
MomentumEquationPressureGradientAdami(dest='fluid',
sources=['fluid']),
MomentumEquationViscosityAdami(dest='fluid', sources=['fluid'
]),
SurfaceForceAdami(dest='fluid', sources=['fluid']),
]),
]
tvf_equations = [
Group(
equations=[SummationDensity(dest='fluid', sources=['fluid'])],
real=False),
Group(equations=[
StateEquation(dest='fluid', sources=None, rho0=rho0, p0=p0),
SmoothedColor(dest='fluid', sources=['fluid']),
],
real=False),
Group(equations=[
MorrisColorGradient(dest='fluid',
sources=['fluid'],
epsilon=epsilon),
],
real=False),
Group(equations=[
InterfaceCurvatureFromNumberDensity(
dest='fluid',
sources=['fluid'],
with_morris_correction=True),
],
real=False),
Group(equations=[
MomentumEquationPressureGradient(dest='fluid',
sources=['fluid'],
pb=p0),
MomentumEquationViscosity(dest='fluid',
sources=['fluid'],
nu=nu),
CSFSurfaceTensionForce(dest='fluid', sources=None,
sigma=sigma),
MomentumEquationArtificialStress(dest='fluid',
sources=['fluid']),
], )
]
morris_equations = [
Group(equations=[
SummationDensitySourceMass(dest='fluid', sources=['fluid']),
],
real=False,
update_nnps=False),
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=rho0,
c0=c0,
gamma=1.0),
SmoothedColor(dest='fluid', sources=[
'fluid',
]),
ScaleSmoothingLength(dest='fluid',
sources=None,
factor=2.0 / 3.0),
],
real=False,
update_nnps=False),
Group(equations=[
MorrisColorGradient(dest='fluid',
sources=[
'fluid',
],
epsilon=epsilon),
],
real=False,
update_nnps=False),
Group(equations=[
InterfaceCurvatureFromDensity(dest='fluid',
sources=['fluid'],
with_morris_correction=True),
ScaleSmoothingLength(dest='fluid', sources=None, factor=1.5),
],
real=False,
update_nnps=False),
Group(equations=[
MomentumEquationPressureGradientMorris(dest='fluid',
sources=['fluid']),
MomentumEquationViscosityMorris(dest='fluid',
sources=['fluid']),
CSFSurfaceTensionForce(dest='fluid', sources=None,
sigma=sigma),
],
update_nnps=False)
]
if self.options.scheme == 'tvf':
return tvf_equations
elif self.options.scheme == 'adami_stress':
return adami_stress_equations
elif self.options.scheme == 'adami':
return adami_equations
elif self.options.scheme == 'shadloo':
return sy11_equations
else:
return morris_equations
def create_equations(self):
h0 = dx * hdx
co = 10.0 * self.geom.get_max_speed(g=9.81)
gamma = 7.0
alpha = 0.5
beta = 0.0
B = co * co * rho0 / gamma
equations = [
Group(equations=[
BodyForce(dest='obstacle', sources=None, gz=-9.81),
NumberDensity(dest='obstacle', sources=['obstacle']),
NumberDensity(dest='boundary', sources=['boundary']),
], ),
# Equation of state
Group(equations=[
TaitEOS(dest='fluid',
sources=None,
rho0=rho0,
c0=co,
gamma=gamma),
TaitEOSHGCorrection(dest='boundary',
sources=None,
rho0=rho0,
c0=co,
gamma=gamma),
TaitEOSHGCorrection(dest='obstacle',
sources=None,
rho0=rho0,
c0=co,
gamma=gamma),
],
real=False),
# Continuity, momentum and xsph equations
Group(equations=[
ContinuityEquation(dest='fluid',
sources=['fluid', 'boundary', 'obstacle']),
ContinuityEquation(dest='boundary', sources=['fluid']),
ContinuityEquation(dest='obstacle', sources=['fluid']),
MomentumEquation(dest='fluid',
sources=['fluid', 'boundary'],
alpha=alpha,
beta=beta,
gz=-9.81,
c0=co,
tensile_correction=True),
PressureRigidBody(dest='fluid',
sources=['obstacle'],
rho0=rho0),
XSPHCorrection(dest='fluid', sources=['fluid']),
RigidBodyCollision(dest='obstacle',
sources=['boundary'],
k=1.0,
d=2.0,
eta=0.1,
kt=0.1),
]),
Group(equations=[RigidBodyMoments(dest='obstacle', sources=None)]),
Group(equations=[RigidBodyMotion(dest='obstacle', sources=None)]),
]
return equations
def create_equations(self):
# Formulation for REF1
equations1 = [
# Spoon Equations
Group(
equations=[
HarmonicOscilllator(dest='spoon',
sources=None,
A=0.5,
omega=0.2),
# Translate acceleration to positions
XSPHCorrection(dest='spoon', sources=['spoon'], eps=0.0)
],
real=False),
# Water Faucet Equations
Group(equations=[
H2OFaucet(dest='tahini',
sources=None,
x=1.25,
y=tahiniH,
r=0.15,
fill_rate=7),
DiffuseH2O(
dest='tahini', sources=['tahini'], diffusion_speed=0.1),
]),
# For the multi-phase formulation, we require an estimate of the
# particle volume. This can be either defined from the particle
# number density or simply as the ratio of mass to density.
Group(
equations=[VolumeFromMassDensity(dest='tahini',
sources=None)], ),
# Equation of state is typically the Tait EOS with a suitable
# exponent gamma
Group(equations=[
TaitEOSHGCorrection(dest='tahini',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
], ),
# The boundary conditions are imposed by extrapolating the tahini
# pressure, taking into considering the bounday acceleration
Group(equations=[
SolidWallPressureBC(dest='bowl',
sources=['tahini'],
b=1.0,
gy=gy,
rho0=rho0,
p0=p0),
SolidWallPressureBC(dest='spoon',
sources=['tahini'],
b=1.0,
gy=gy,
rho0=rho0,
p0=p0),
], ),
# Main acceleration block
Group(equations=[
TahiniEquation(
dest='tahini', sources=['tahini'], sigma=dx / 1.122),
# Continuity equation
ContinuityEquation(dest='tahini',
sources=['tahini', 'bowl', 'spoon']),
# Pressure gradient with acceleration damping.
MomentumEquationPressureGradient(
dest='tahini',
sources=['tahini', 'bowl', 'spoon'],
pb=0.0,
gy=gy,
tdamp=tdamp),
# artificial viscosity for stability
MomentumEquationArtificialViscosity(
dest='tahini',
sources=['tahini', 'bowl', 'spoon'],
alpha=1,
c0=c0),
# Position step with XSPH
XSPHCorrection(dest='tahini', sources=['tahini'], eps=0.0)
]),
]
# Formulation for REF3
equations3 = [
# Spoon Equations
Group(
equations=[
HarmonicOscilllator(dest='spoon',
sources=None,
A=0.5,
omega=0.2),
# Translate acceleration to positions
XSPHCorrection(dest='spoon', sources=['spoon'], eps=0.0)
],
real=False),
# Water Faucet Equations
Group(equations=[
H2OFaucet(dest='tahini',
sources=None,
x=Cx,
y=tahiniH,
r=0.15,
fill_rate=5),
DiffuseH2O(
dest='tahini', sources=['tahini'], diffusion_speed=0.1),
]),
# For the multi-phase formulation, we require an estimate of the
# particle volume. This can be either defined from the particle
# number density or simply as the ratio of mass to density.
Group(
equations=[VolumeFromMassDensity(dest='tahini',
sources=None)], ),
# Equation of state is typically the Tait EOS with a suitable
# exponent gamma. The solid phase is treated just as a fluid and
# the pressure and density operations is updated for this as well.
Group(equations=[
TaitEOS(dest='tahini',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
TaitEOS(dest='bowl',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
TaitEOS(dest='spoon',
sources=None,
rho0=rho0,
c0=c0,
gamma=gamma),
], ),
# Main acceleration block. The boundary conditions are imposed by
# peforming the continuity equation and gradient of pressure
# calculation on the bowl phase, taking contributions from the
# tahini phase
Group(equations=[
TahiniEquation(
dest='tahini', sources=['tahini'], sigma=dx / 1.122),
# Continuity equation
ContinuityEquation(dest='tahini',
sources=['tahini', 'bowl', 'spoon']),
ContinuityEquation(dest='bowl', sources=['tahini']),
ContinuityEquation(dest='spoon', sources=['tahini']),
# Pressure gradient with acceleration damping.
MomentumEquationPressureGradient(
dest='tahini',
sources=['tahini', 'bowl', 'spoon'],
pb=0.0,
gy=gy,
tdamp=tdamp),
# artificial viscosity for stability
MomentumEquationArtificialViscosity(
dest='tahini',
sources=['tahini', 'bowl', 'spoon'],
alpha=1,
c0=c0),
# Position step with XSPH
XSPHCorrection(dest='tahini', sources=['tahini'], eps=0.5)
]),
]
if self.options.bc_type == 1:
return equations1
elif self.options.bc_type == 3:
return equations3
