def test_classical() -> None:
# circuit to cover capabilities covered in HQS example notebook
c = Circuit(1)
a = c.add_c_register("a", 8)
b = c.add_c_register("b", 10)
c.add_c_register("c", 10)
c.add_c_setbits([True], [a[0]])
c.add_c_setbits([False, True] + [False] * 6, list(a))
c.add_c_setbits([True, True] + [False] * 8, list(b))
c.X(0, condition=reg_eq(a ^ b, 1))
c.X(0, condition=(a[0] ^ b[0]))
c.X(0, condition=reg_eq(a & b, 1))
c.X(0, condition=reg_eq(a | b, 1))
c.X(0, condition=a[0])
c.X(0, condition=reg_neq(a, 1))
c.X(0, condition=if_not_bit(a[0]))
c.X(0, condition=reg_gt(a, 1))
c.X(0, condition=reg_lt(a, 1))
c.X(0, condition=reg_geq(a, 1))
c.X(0, condition=reg_leq(a, 1))
b = HoneywellBackend("HQS-LT-S1-APIVAL")
b.compile_circuit(c)
assert b.get_counts(c, 10)
def test_honeywell() -> None:
token = os.getenv("HQS_AUTH")
backend = HoneywellBackend(
device_name="HQS-LT-1.0-APIVAL", machine_debug=skip_remote_tests
)
c = Circuit(4, 4, "test 1")
c.H(0)
c.CX(0, 1)
c.Rz(0.3, 2)
c.CSWAP(0, 1, 2)
c.CRz(0.4, 2, 3)
c.CY(1, 3)
c.ZZPhase(0.1, 2, 0)
c.Tdg(3)
c.measure_all()
backend.compile_circuit(c)
n_shots = 4
handle = backend.process_circuits([c], n_shots)[0]
correct_shots = np.zeros((4, 4))
correct_counts = {(0, 0, 0, 0): 4}
res = backend.get_result(handle, timeout=49)
shots = res.get_shots()
counts = res.get_counts()
assert backend.circuit_status(handle).status is StatusEnum.COMPLETED
assert np.all(shots == correct_shots)
assert counts == correct_counts
newshots = backend.get_shots(c, 4, timeout=49)
assert np.all(newshots == correct_shots)
newcounts = backend.get_counts(c, 4)
assert newcounts == correct_counts
if token is None:
assert backend.device is None
def test_bell() -> None:
b = HoneywellBackend(device_name="HQS-LT-1.0-APIVAL")
c = Circuit(2, 2, "test 2")
c.H(0)
c.CX(0, 1)
c.measure_all()
b.compile_circuit(c)
n_shots = 10
shots = b.get_shots(c, n_shots)
print(shots)
assert all(q[0] == q[1] for q in shots)
def test_default_pass() -> None:
b = HoneywellBackend(device_name="HQS-LT-1.0-APIVAL")
for ol in range(3):
comp_pass = b.default_compilation_pass(ol)
c = Circuit(3, 3)
c.H(0)
c.CX(0, 1)
c.CSWAP(1, 0, 2)
c.ZZPhase(0.84, 2, 0)
c.measure_all()
comp_pass.apply(c)
for pred in b.required_predicates:
assert pred.verify(c)
def test_multireg() -> None:
b = HoneywellBackend(device_name="HQS-LT-1.0-APIVAL", label="test 3")
c = Circuit()
q1 = Qubit("q1", 0)
q2 = Qubit("q2", 0)
c1 = Bit("c1", 0)
c2 = Bit("c2", 0)
for q in (q1, q2):
c.add_qubit(q)
for cb in (c1, c2):
c.add_bit(cb)
c.H(q1)
c.CX(q1, q2)
c.Measure(q1, c1)
c.Measure(q2, c2)
b.compile_circuit(c)
n_shots = 10
shots = b.get_shots(c, n_shots)
assert np.array_equal(shots, np.zeros((10, 2)))
def test_cost_estimate(c: Circuit, n_shots: int) -> None:
b = HoneywellBackend("HQS-LT-S1-APIVAL")
b.compile_circuit(c)
estimate = b.cost_estimate(c, n_shots)
status = b.circuit_status(b.process_circuit(c, n_shots))
status_msg = status.message
message_dict = literal_eval(status_msg)
if message_dict["cost"] is not None:
api_cost = float(message_dict["cost"])
assert estimate == api_cost
def test_cancel() -> None:
b = HoneywellBackend(device_name="HQS-LT-1.0-APIVAL", label="test cancel")
c = Circuit(2, 2).H(0).CX(0, 1).measure_all()
b.compile_circuit(c)
handle = b.process_circuit(c, 10)
try:
# will raise HTTP error if job is already completed
b.cancel(handle)
except HQSAPIError as err:
check_completed = "job has completed already" in str(err)
assert check_completed
if not check_completed:
raise err
print(b.circuit_status(handle))
def test_shots_bits_edgecases(n_shots, n_bits) -> None:
honeywell_backend = HoneywellBackend("HQS-LT-1.0-APIVAL", machine_debug=True)
c = Circuit(n_bits, n_bits)
# TODO TKET-813 add more shot based backends and move to integration tests
h = honeywell_backend.process_circuit(c, n_shots)
res = honeywell_backend.get_result(h)
correct_shots = np.zeros((n_shots, n_bits), dtype=int)
correct_shape = (n_shots, n_bits)
correct_counts = Counter({(0,) * n_bits: n_shots})
# BackendResult
assert np.array_equal(res.get_shots(), correct_shots)
assert res.get_shots().shape == correct_shape
assert res.get_counts() == correct_counts
# Direct
assert np.array_equal(honeywell_backend.get_shots(c, n_shots), correct_shots)
assert honeywell_backend.get_shots(c, n_shots).shape == correct_shape
assert honeywell_backend.get_counts(c, n_shots) == correct_counts
)
tp = TketPass(seq)
pm = PassManager(
[
# Insert initial qiskit passes
Unroller(["cx", "p", "u"]),
tp,
# Insert final qiskit passes
]
)
qi = QuantumInstance(backend, pass_manager=pm)
# Similarly, when using `TketBackend` it may be necessary to include some compilation in `qiskit` to enable the conversion into `pytket`, and then some further `pytket` compilation to get it suitable for the actual target backend. For example, `qiskit.circuit.library.standard_gates.DCXGate` currently does not have an equivalent elementary operation in `pytket`, so must be decomposed before we can map across, and likewise the `OpType.ZZMax` gate used by `pytket.extensions.honeywell.HoneywellBackend` (from the `pytket-honeywell` extension) has no equivalent in `qiskit` so the targeting of the final gateset must be performed by `pytket`.
from pytket.extensions.honeywell import HoneywellBackend
pm = PassManager(
Unroller(["cx", "p", "u"])
) # Map to a basic gateset to allow conversion to pytket
hb = HoneywellBackend(device_name="HQS-LT-1.0-APIVAL", machine_debug=True)
backend = TketBackend(
hb, hb.default_compilation_pass(2)
) # Then use pytket compilation with optimisation level 2
qi = QuantumInstance(backend, pass_manager=pm)
# Exercises:
# - Try running the GAS example using another device/simulator through the `TketBackend` wrapper. The simplest option is to just go full-circle and use the `AerBackend` from `pytket-qiskit` which itself is a wrapper around the `qasm_simulator`.
# - Take another example notebook from the Qiskit [official tutorials](https://github.com/Qiskit/qiskit-tutorials) or [community tutorials](https://github.com/qiskit-community/qiskit-community-tutorials) and try changing out the backend used to a `pytket` backend. For example, try running the [Qiskit Chemistry example](https://github.com/Qiskit/qiskit-tutorials/blob/master/tutorials/chemistry/1_programmatic_approach.ipynb) using a Rigetti device (or simulator) with `ForestBackend` from `pytket-pyquil`, and add in `pytket.passes.PauliSimp` to exploit the structure of the UCCSD ansatz.
