def setUp(self):
"""Set some data and ensure the application is in the state we want"""
Timings.Fast()
self.app = Application()
self.app.start(os.path.join(mfc_samples_folder, u"CmnCtrl3.exe"))
self.app2 = Application().start(_notepad_exe())
def setTiming(self, speed):
if speed.lower() == 'slow':
Timings.Slow()
elif speed.lower() == 'fast':
Timings.Fast()
else:
Timings.Defaults()
def setUp(self):
"""Set some data and ensure the application is in the state we want"""
Timings.Fast()
actionlogger.enable()
self.app = Application().start(_notepad_exe())
self.logger = logging.getLogger('pywinauto')
self.out = self.logger.parent.handlers[0].stream
self.logger.parent.handlers[0].stream = open('test_logging.txt', 'w')
def setUp(self):
"""Set some data and ensure the application is in the state we want"""
Timings.Fast()
self.app = Application()
self.app.start(os.path.join(mfc_samples_folder, u"CmnCtrl1.exe"))
self.dlg = self.app.Common_Controls_Sample
self.ctrl = self.dlg.TreeView.WrapperObject()
def setUp(self):
"""Set some data and ensure the application is in the state we want"""
Timings.Fast()
self.app = Application()
self.app.start(_notepad_exe())
self.dlg = self.app.UntitledNotepad
self.ctrl = HwndWrapper(self.dlg.Edit.handle)
def setUp(self):
"""Set some data and ensure the application is in the state we want"""
Timings.Fast()
self.app = Application().start(os.path.join(mfc_samples_folder, u"CmnCtrl3.exe"))
self.dlg = self.app.Common_Controls_Sample
self.dlg.TabControl.Select('CButton (Command Link)')
self.ctrl = HwndWrapper(self.dlg.Command_button_here.handle)
def setUp(self):
"""Set some data and ensure the application is in the state we want"""
Timings.Fast()
self.app1 = Application().start(u"cmd.exe",
create_new_console=True,
wait_for_idle=False)
self.app2 = Application().start(
os.path.join(mfc_samples_folder, u"CmnCtrl2.exe"))
def setUp(self):
"""Set some data and ensure the application is in the state we want"""
Timings.Fast()
EmptyClipboard()
self.app1 = Application().start("notepad.exe")
self.app2 = Application().start("notepad.exe")
self.app1.UntitledNotepad.MoveWindow(RECT(0, 0, 200, 200))
self.app2.UntitledNotepad.MoveWindow(RECT(0, 200, 200, 400))
def setUp(self):
"""Set some data and ensure the application is in the state we want"""
Timings.Fast()
self.app1 = Application().start(u"cmd.exe",
create_new_console=True,
wait_for_idle=False)
self.app2 = Application().start(os.path.join(
mfc_samples_folder, u"CmnCtrl2.exe"))
self.app2.wait_cpu_usage_lower(threshold=1.5, timeout=30, usage_interval=1)
def setUp(self):
"""Set some data and ensure the application is in the state we want"""
Timings.Fast()
self.app = Application()
self.app.start(_notepad_exe())
self.dlg = self.app.Window_(title='Untitled - Notepad', class_name='Notepad')
self.ctrl = HwndWrapper(self.dlg.Edit.handle)
self.dlg.Edit.SetEditText("Here is some text\r\n and some more")
self.app2 = Application().start(_notepad_exe())
def matchXl_dict(self,year):
self.book = xlrd.open_workbook(self.from_this_dir('C:\\MYP\\Python\\custom.xlsx'), formatting_info=False)
self.sheet = self.book.sheet_by_name('Sheet1')
xlval = self.sheet.col_values( 0,0,4)
Timings.Defaults()
app = Application()
try:
app.connect_(title_re = ".*Skip Logic.*")
except:
app.start_('C:\MYP\Swami-KT\MYP_09_00_00_93\QATools\start.bat')
time.sleep(5)
app.connect_(title_re = ".*Skip Logic.*")
Timings.Fast()
def save_spectra(self):
acquisition_mode = self.acquisition_mode.get()
safe_acquisition = not self.fast_acquisition.get()
overwrite = self.overwrite.get()
if self.fast_acquisition.get():
Timings.Fast()
Timings.window_find_timeout = 2
if acquisition_mode == ACQUISITION_MODE_MANUAL:
self.results_text.set("Manual save")
if acquisition_mode == ACQUISITION_MODE_LIVE:
self.results_text.set("Live save")
app = Application(backend="win32").connect(
path=self.program_path.get())
logger.info("Application connected")
top_window = app.window(title_re=".*ElementsView.*")
if safe_acquisition:
top_window.wait("exists enabled visible ready")
for spectrum_id in range(1, self.number_spectra.get() + 1):
logger.info("Spectrum id: {:d}".format(spectrum_id))
if safe_acquisition:
top_window.wait("exists enabled visible ready")
if acquisition_mode == ACQUISITION_MODE_MANUAL:
top_window.Button2.click()
time.sleep(self.delay_spectrum_s.get())
if safe_acquisition:
top_window.wait("exists enabled visible ready")
top_window.menu_select("File -> Save")
if safe_acquisition:
app.Comment.wait("exists enabled visible ready")
app.CommentEdit.Edit.SetEditText("auto script")
app.Comment.OK.click()
save_as_window = app['Save As']
if safe_acquisition:
save_as_window.wait("exists enabled visible ready")
file_name = "%s_%i.elv" % (self.basename.get(), spectrum_id)
save_as_window.Edit.SetEditText(file_name)
save_as_window.Save.click()
if overwrite:
try:
window_confirm = app['Confirm Save As']
if safe_acquisition:
window_confirm.wait("exists enabled visible ready")
if self.overwrite.get():
window_confirm.Yes.click()
else:
window_confirm.No.click()
save_as_window.Cancel.click()
self.results_text.set("Cancel save file already exist")
return
except Exception as message:
logger.error(message)
logger.info("Done")
self.results_text.set("Done")
import os
import os.path
import unittest
import time
import pprint
import pdb
import warnings
import sys
sys.path.append(".")
from pywinauto import application
from pywinauto.application import *
from pywinauto import findwindows
from pywinauto.timings import Timings
Timings.Fast()
#application.set_timing(1, .01, 1, .01, .05, 0, 0, .1, 0, .01)
# page setup dialog takes a long time to load
# so make sure that we wait for it.
Timings.window_find_timeout = 10
class ApplicationTestCases(unittest.TestCase):
"Unit tests for the application.Application class"
def setUp(self):
"""Start the application set some data and ensure the application
is in the state we want it."""
self.prev_warn = warnings.showwarning
def no_warnings(*args, **kwargs): pass
def _set_timings_fast():
"""Set Timings.Fast() and some slower settings for reliability"""
Timings.Fast()
Timings.window_find_timeout = 3
Timings.closeclick_dialog_close_wait = 2.
def RunNotepad():
"Run notepad and do some small stuff with it"
print "Run with option 'language' e.g. notepad_fast.py language to use"
print "application data. This should work on any language Windows/Notepad"
print
print "Trying fast timing settings - it's possible these won't work"
print "if pywinauto tries to access a window that is not accessible yet"
# use fast timings - but allow to wait for windows a long time
Timings.Fast()
Timings.window_find_timeout = 10
start = time.time()
run_with_appdata = False
if len(sys.argv) > 1 and sys.argv[1].lower() == 'language':
run_with_appdata = True
scriptdir = os.path.split(os.path.abspath(__file__))[0]
if run_with_appdata:
print "\nRunning this script so it will load application data and run"
print "against any lanuguage version of Notepad/Windows"
# make sure that the app data gets read from the same folder as
# the script
app = application.Application(
os.path.join(scriptdir, "Notepad_fast.pkl"))
else:
app = application.Application()
## for distribution we don't want to connect to anybodies application
## because we may mess up something they are working on!
#try:
# app.connect_(path = ur"c:\windows\system32\notepad.exe")
#except application.ProcessNotFoundError:
# app.start_(ur"c:\windows\system32\notepad.exe")
app.start_(ur"notepad.exe")
app.Notepad.MenuSelect("File->PageSetup")
# ----- Page Setup Dialog ----
# Select the 4th combobox item
app.PageSetupDlg.SizeComboBox.Select(4)
# Select the 'Letter' combobox item or the Letter
try:
app.PageSetupDlg.SizeComboBox.Select("Letter")
except ValueError:
app.PageSetupDlg.SizeComboBox.Select('Letter (8.5" x 11")')
app.PageSetupDlg.SizeComboBox.Select(2)
# run some tests on the Dialog. List of available tests:
# "AllControls",
# "AsianHotkey",
# "ComboBoxDroppedHeight",
# "CompareToRefFont",
# "LeadTrailSpaces",
# "MiscValues",
# "Missalignment",
# "MissingExtraString",
# "Overlapping",
# "RepeatedHotkey",
# "Translation",
# "Truncation",
bugs = app.PageSetupDlg.RunTests('RepeatedHotkey Truncation')
# if there are any bugs they will be printed to the console
# and the controls will be highlighted
tests.print_bugs(bugs)
# ----- Next Page Setup Dialog ----
app.PageSetupDlg.Printer.Click()
# do some radio button clicks
# Open the Connect to printer dialog so we can
# try out checking/unchecking a checkbox
app.PageSetupDlg.Network.Click()
# ----- Connect To Printer Dialog ----
# Select a checkbox
app.ConnectToPrinter.ExpandByDefault.Check()
app.ConnectToPrinter.ExpandByDefault.UnCheck()
# try doing the same by using click
app.ConnectToPrinter.ExpandByDefault.Click()
app.ConnectToPrinter.ExpandByDefault.Click()
# close the dialog
app.ConnectToPrinter.Cancel.CloseClick()
# ----- 2nd Page Setup Dialog again ----
app.PageSetupDlg.Properties.Click()
doc_props = app.window_(title_re=".*Properties$")
doc_props.Wait('exists', timeout=40)
#
# # ----- Document Properties Dialog ----
# # some tab control selections
# # Two ways of selecting tabs with indices...
# doc_props.TabCtrl.Select(0)
# doc_props.TabCtrl.Select(1)
# try:
# doc_props.TabCtrl.Select(2)
# except IndexError:
# # not all users have 3 tabs in this dialog
# pass
#
# # or with text...
# #doc_props.TabCtrl.Select("PaperQuality")
# doc_props.TabCtrl.Select(1)
#
# try:
# #doc_props.TabCtrl.Select("JobRetention")
# doc_props.TabCtrl.Select("3")
# except MatchError:
# # some people do not have the "Job Retention" tab
# pass
#
# doc_props.TabCtrl.Select("Finishing")
# #doc_props.TabCtrl.Select(0)
#
# # do some radio button clicks
# doc_props.RotatedLandscape.Click()
# doc_props.BackToFront.Click()
# doc_props.FlipOnShortEdge.Click()
#
# doc_props.Portrait.Click()
# doc_props._None.Click()
# #doc_props.FrontToBack.Click()
#
# # open the Advanced options dialog in two steps
# advbutton = doc_props.Advanced
# advbutton.Click()
#
# # close the 4 windows
#
# # ----- Advanced Options Dialog ----
# app.window_(title_re = ".* Advanced Options").Ok.Click()
# ----- Document Properties Dialog again ----
doc_props.Cancel.CloseClick()
# for some reason my current printer driver
# window does not close cleanly :(
if doc_props.Cancel.Exists():
doc_props.OK.CloseClick()
# ----- 2nd Page Setup Dialog again ----
app.PageSetupDlg.OK.CloseClick()
# ----- Page Setup Dialog ----
app.PageSetupDlg.Ok.CloseClick()
# type some text - note that extended characters ARE allowed
app.Notepad.Edit.SetEditText(u"I am typing s\xe4me text to Notepad\r\n\r\n"
"And then I am going to quit")
app.Notepad.Edit.RightClick()
app.Popup.MenuItem("Right To Left Reading Order").Click()
#app.PopupMenu.MenuSelect("Paste", app.Notepad.ctrl_())
#app.Notepad.Edit.RightClick()
#app.PopupMenu.MenuSelect(
# "Right To Left Reading Order", app.Notepad.ctrl_())
#app.PopupMenu.MenuSelect(
# "Show unicode control characters", app.Notepad.ctrl_())
#time.sleep(1)
#app.Notepad.Edit.RightClick()
#app.PopupMenu.MenuSelect("Right To Left Reading Order", app.Notepad.ctrl_())
#time.sleep(1)
#app.Notepad.Edit.RightClick()
#app.PopupMenu.MenuSelect(
# "Insert Unicode control character -> IAFS", app.Notepad.ctrl_())
#time.sleep(1)
#app.Notepad.Edit.TypeKeys("{ESC}")
# the following shows that Sendtext does not accept
# accented characters - but does allow 'control' characters
app.Notepad.Edit.TypeKeys(
u"{END}{ENTER}SendText d\xf6\xe9s "
u"s\xfcpp\xf4rt \xe0cce\xf1ted characters!!!",
with_spaces=True)
# Try and save
app.Notepad.MenuSelect("File->SaveAs")
app.SaveAs.EncodingComboBox.Select("UTF-8")
app.SaveAs.FileNameEdit.SetEditText("Example-utf8.txt")
app.SaveAs.Save.CloseClick()
# my machine has a weird problem - when connected to the network
# the SaveAs Dialog appears - but doing anything with it can
# cause a LONG delay - the easiest thing is to just wait
# until the dialog is no longer active
# - Dialog might just be gone - because click worked
# - dialog might be waiting to disappear
# so can't wait for next dialog or for it to be disabled
# - dialog might be waiting to display message box so can't wait
# for it to be gone or for the main dialog to be enabled.
# while the dialog exists wait upto 30 seconds (and yes it can
# take that long on my computer sometimes :-( )
app.SaveAsDialog2.Cancel.WaitNot('enabled')
# If file exists - it asks you if you want to overwrite
try:
app.SaveAs.Yes.Wait('exists').CloseClick()
except pywinauto.MatchError:
pass
# exit notepad
app.Notepad.MenuSelect("File->Exit")
if not run_with_appdata:
app.WriteAppData(os.path.join(scriptdir, "Notepad_fast.pkl"))
print "That took %.3f to run" % (time.time() - start)
def RunTestTool(self, year, quarter, sleeptime):
Timings.Defaults()
app = Application()
try:
app.connect_(title_re = ".*a.*")
sys.stderr.write ( 'connected to window '+'\n')
except:
import sys, string, os
app.start_('C:\\MYP\\Python\\start.bat')
time.sleep(5)
app.connect_(title_re = ".*a.*")
sys.stderr.write ( 'connected to window '+'\n')
app.connect_(title_re = ".*a.*")
app.top_window_().Restore()
Timings.Fast()
window = app.window_(process=18000)
window.SetFocus()
time.sleep(5)
app.top_window_().Click()
time.sleep(5)
#window.TypeKeys("{TAB 2}")
window.TypeKeys("{RIGHT 2}")
window.TypeKeys("{TAB 4}")
sys.stderr.write ( 'tabbing completed'+'\n')
dict = app.top_window_()._ctrl_identifiers()
print dict
for k,v in dict.items():
#print v
for v1 in v:
if (v1==u'a'):
print k.handle
#k.Click()
app.top_window_().YearComboxBox.Select(year)
#app.top_window_().ComboBox7.Select("a")
app.top_window_()['a'].Click()
sys.stderr.write ( 'Setting Options and Clicked'+'\n')
print app.top_window_().PopulationComboBox1.ItemTexts()
measures= []
measures = app.top_window_().PopulationComboBox1.ItemTexts()
print measures
mmap= {
'a':['b'],
}
#from collections import OrderedDict
#mmap1={}
#mmap1=OrderedDict((mmap[key], True) for key in mmap)
measures=mmap.keys()
measures.sort()
s=''
s1=''
dictErrors ={}
i=0
previousError=''
previousSkip=''
for measure in measures:
i=i+1
#if(i==6):
#break
print 'using '
print measure
indicators=[]
indicators=mmap[measure]
if not measure == '': # Change the not operator if you want to run it for all cases in one go.
app.top_window_().PopulationComboBox1.Select(measure)
#indicators= app.top_window_().IndicatorComboBox3.ItemTexts()
for indicator in indicators:
if indicator == '':
continue
app.top_window_().IndicatorComboBox3.Select(indicator)
app.top_window_()['Create and Run TestsButton'].Click()
#app.top_window_()['Create and Run TestsButton'].Click()
#time.sleep(12)
while(True):
time.sleep(1)
times_Run = app.top_window_()['Testing:Edit'].Texts()[0].strip(" ").split()[0]
if(times_Run=='00100'):
s1=app.top_window_()['Skip Logic ErrorsEdit2'].Texts()[0].strip(" ")
s = app.top_window_()['Measure Engine ErrorsEdit2'].Texts()[0].strip(" ")
print s
print s1
break
#print dictErrors
sleeptime = 30
errors=''
time.sleep(sleeptime)
sys.stderr.write ( 'Slept for '+str(sleeptime)+'\n')
#print s+s1
#s1 = app.top_window_()['Skip Logic ErrorsEdit2'].Texts()[0]
#s = app.top_window_()['Measure Engine ErrorsEdit2'].Texts()[0]
print errors
print dictErrors
if(errors != '' ):
raise AssertionError(errors)
app.start_('C:\\MYP\\Python\\stop.bat')
print 'reached3'
#MayNotWork app.kill()
app.start_('C:\\MYP\\Python\\stop.bat')
sys.stderr.write ( 'All done')