def run(self):
"""Run method that starts all the real work"""
# Create the dialog with elements (after translation) and keep reference
# Only create GUI ONCE in callback, so that it will only load when the plugin is started
if self.first_start:
self.first_start = False
self.dlg = ProevenVerzamelingDialog()
self.reset_ui()
# Initialize QGIS filewidget to select a directory
self.dlg.fileWidget.setStorageMode(1)
# Signalling the Open button. Here the actual logic behind the plugin starts
self.dlg.buttonBox.button(QDialogButtonBox.Ok).clicked.connect(
self.read_form)
# Signalling the reset button.
self.dlg.buttonBox.button(
QDialogButtonBox.RestoreDefaults).clicked.connect(
self.reset_ui)
rx1 = QRegExp(r"^\[\d{1,2}(\.\d{1})?(?:,\d{1,2}(\.\d{1})?)+\]$")
vg_validator = QRegExpValidator(rx1)
self.dlg.le_vg_sdp.setValidator(vg_validator)
self.dlg.le_vg_trx.setValidator(vg_validator)
rx2 = QRegExp(r"^[\w\-. ]+$")
filename_validator = QRegExpValidator(rx2)
self.dlg.le_outputName.setValidator(filename_validator)
# show the dialog
self.dlg.show()
def __init__(self, parent=None):
QSyntaxHighlighter.__init__(self, parent)
self.parent = parent
sqlKeyword = QTextCharFormat()
sqlOperator = QTextCharFormat()
self.highlightingRules = []
# Keywords
sqlKeyword.setFontWeight(QFont.Bold)
sqlKeyword.setForeground(Qt.blue)
sqlKeywords = ["AND", "OR", "LIKE"]
for word in sqlKeywords:
regExp = QRegExp("\\b" + word + "\\b", Qt.CaseInsensitive)
rule = HighlightingRule(regExp, sqlKeyword)
self.highlightingRules.append(rule)
# Comparison Operators
sqlOperator.setForeground(Qt.magenta)
sqlOperators = ["<", ">", "="]
for operator in sqlOperators:
regExp = QRegExp("\\W" + operator + "\\W", Qt.CaseInsensitive)
rule = HighlightingRule(regExp, sqlOperator)
self.highlightingRules.append(rule)
def set_regexp_date_validator(widget, button=None, regex_type=1):
""" Set QRegExpression in order to validate QLineEdit(widget) field type date.
Also allow to enable or disable a QPushButton(button), like typical accept button
@Type=1 (yyy-mm-dd), @Type=2 (dd-mm-yyyy)
"""
placeholder = "yyyy-mm-dd"
if regex_type == 1:
widget.setPlaceholderText("yyyy-mm-dd")
placeholder = "yyyy-mm-dd"
reg_exp = QRegExp(
"(((\d{4})([-])(0[13578]|10|12)([-])(0[1-9]|[12][0-9]|3[01]))|"
"((\d{4})([-])(0[469]|11)([-])([0][1-9]|[12][0-9]|30))|"
"((\d{4})([-])(02)([-])(0[1-9]|1[0-9]|2[0-8]))|"
"(([02468][048]00)([-])(02)([-])(29))|"
"(([13579][26]00)([-])(02)([-])(29))|"
"(([0-9][0-9][0][48])([-])(02)([-])(29))|"
"(([0-9][0-9][2468][048])([-])(02)([-])(29))|"
"(([0-9][0-9][13579][26])([-])(02)([-])(29)))")
elif regex_type == 2:
widget.setPlaceholderText("dd-mm-yyyy")
placeholder = "dd-mm-yyyy"
reg_exp = QRegExp(
"(((0[1-9]|[12][0-9]|3[01])([-])(0[13578]|10|12)([-])(\d{4}))|"
"(([0][1-9]|[12][0-9]|30)([-])(0[469]|11)([-])(\d{4}))|"
"((0[1-9]|1[0-9]|2[0-8])([-])(02)([-])(\d{4}))|"
"((29)(-)(02)([-])([02468][048]00))|"
"((29)([-])(02)([-])([13579][26]00))|"
"((29)([-])(02)([-])([0-9][0-9][0][48]))|"
"((29)([-])(02)([-])([0-9][0-9][2468][048]))|"
"((29)([-])(02)([-])([0-9][0-9][13579][26])))")
widget.setValidator(QRegExpValidator(reg_exp))
widget.textChanged.connect(
partial(eval_regex, widget, reg_exp, button, placeholder))
def prepareLayout(self):
"""Przygotowanie layoutu SMTP"""
self.port_lineEdit.setValidator(QRegExpValidator(QRegExp("[0-9]*")))
self.host_lineEdit.setValidator(QRegExpValidator(QRegExp(r"\S*")))
self.receiver_lineEdit.setValidator(
QRegExpValidator(QRegExp(r"[0-9a-zA-Z.\-\_\@\+]*")))
self.user_lineEdit.setValidator(
QRegExpValidator(QRegExp(r"[0-9a-zA-Z.\-\_\@\+]*")))
self.readSettings("smtp") # wczytaj zapisane wartości
self.cancel_btn.clicked.connect(self.close)
self.send_btn.clicked.connect(self.send_btn_clicked)
self.save_btn.clicked.connect(lambda: self.saveSettings("smtp"))
def __init__(self, iface):
"""Constructor.
:param iface: An interface instance that will be passed to this class
which provides the hook by which you can manipulate the QGIS
application at run time.
:type iface: QgsInterface
"""
# Save reference to the QGIS interface
self.iface = iface
# initialize plugin directory
self.plugin_dir = os.path.dirname(__file__)
self.dlg = ConstIdentificacionDialog(parent=iface.mainWindow())
# initialize locale
locale = QSettings().value('locale/userLocale')[0:2]
locale_path = os.path.join(self.plugin_dir, 'i18n',
'ConstIdentificacion_{}.qm'.format(locale))
if os.path.exists(locale_path):
self.translator = QTranslator()
self.translator.load(locale_path)
QCoreApplication.installTranslator(self.translator)
# Declare instance attributes
self.actions = []
self.menu = self.tr(u'&Constancia Identificacion')
self.abrePredio5 = False
self.directorioAGuardar5 = None
self.cve_catastral5 = None
self.canvas = iface.mapCanvas()
# eventos
self.dlg.btnBrowse_4.clicked.connect(self.selectDirectory4)
self.dlg.btnGenerar_4.clicked.connect(self.generarDoc4)
self.dlg.btnSeleccionar_4.clicked.connect(self.activarSeleccion4)
self.dlg.exit_signal.connect(self.closeEvent)
self.dlg.fldCveCat_4.textChanged.connect(self.lineEditToUpper4)
#validaciones
rx = QRegExp("[a-zA-Z0-9]{31}")
val = QRegExpValidator(rx)
self.dlg.fldCveCat_4.setValidator(val)
rx = QRegExp("[a-zA-ZÀ-ÿ ]{255}")
val = QRegExpValidator(rx)
self.dlg.fldNomSolic.setValidator(val)
self.onlyInt = QIntValidator()
self.dlg.fldNumSolucitud.setValidator(self.onlyInt)
self.dlg.dateEdit_2.setDate(QDate.currentDate())
def prepareLayout(self):
"""Przygotowanie layoutu metadanych"""
for listWidget in utils.getWidgetsByType(self, QListWidget):
self.prepareListWidgets(listWidget)
# pola z ustawień
initializeMetadataForm(self)
# pola edytowalne
metadataElementDictToForm(
metadataElementDict=dictionaries.metadataListWidgetsDefaultItems,
targetForm=self)
p = QPixmap(':/plugins/wtyczka_app/img/info1.png')
# Ograniczenia Pól QLineEdit
# URI:
for objectName in ["e4_lineEdit"]:
input = utils.getWidgetByName(self, QLineEdit, objectName)
input.setValidator(QRegExpValidator(QRegExp(r"\S*")))
# mail:
for objectName in ["e22_mail_lineEdit", "e29_mail_lineEdit"]:
input = utils.getWidgetByName(self, QLineEdit, objectName)
input.setValidator(
QRegExpValidator(QRegExp(r"[0-9a-zA-Z.\-\_\@\+]*")))
# unikalny identyfikator danych przestrzennych:
input = utils.getWidgetByName(self, QLineEdit, "e5_lineEdit")
input.setValidator(QRegExpValidator(QRegExp(r"[0-9A-Z.\-/]*")))
# prostokat ograniczajacy
input = utils.getWidgetByName(self, QLineEdit, "e11_lineEdit")
input.setValidator(QRegExpValidator(QRegExp("[0-9.,]*")))
# rozdzielczość przestrzenna
input = utils.getWidgetByName(self, QLineEdit, "e16_lineEdit")
input.setValidator(QRegExpValidator(QRegExp("[0-9]*")))
# czyszczenie QgsDateTimeEdit
for dateTimeEdit in utils.getWidgetsByType(self, QDateTimeEdit):
if dateTimeEdit.objectName() != 'e30_dateTimeEdit':
dateTimeEdit.clear()
# nadanie grafiki tooltipa
for label in utils.getWidgetsByType(self, QLabel):
if label.objectName().endswith("_tooltip"):
label.setMaximumWidth(16)
label.setPixmap(p.scaled(16, 16, Qt.KeepAspectRatio))
label.setToolTip(
"<FONT COLOR=black>%s</FONT>" % label.toolTip()
) # dodanie tooltip z documentation 'rich text' dla zawijania
def __init__(self, parent=None):
super().__init__(parent)
keyword_format = QTextCharFormat()
keyword_format.setForeground(Qt.darkMagenta)
keyword_patterns = [
"\\b?xml\\b", "/>", ">", "<", ";", "\[", "\]", "\(", "\)"
]
self.highlightingRules = [(QRegExp(pattern), keyword_format)
for pattern in keyword_patterns]
element_format = QTextCharFormat()
element_format.setForeground(QColor("#117700"))
self.highlightingRules.append(
(QRegExp("\\b[A-Za-z_\-]+(?=[\s\/>:;])"), element_format))
nominatim_area_format = QTextCharFormat()
nominatim_area_format.setFontItalic(True)
nominatim_area_format.setFontWeight(QFont.Bold)
nominatim_area_format.setForeground(QColor("#FF7C00"))
self.highlightingRules.append(
(QRegExp("\{\{[A-Za-z0-9:, ]*\}\}"), nominatim_area_format))
attribute_format = QTextCharFormat()
attribute_format.setFontItalic(True)
attribute_format.setForeground(QColor("#2020D2"))
self.highlightingRules.append(
(QRegExp("\\b[A-Za-z0-9_-]+(?=\\=|\\[|\\(|$|\\.)"),
attribute_format))
value_format = QTextCharFormat()
value_format.setForeground(Qt.red)
self.highlightingRules.append(
(QRegExp("(\"[A-Za-z0-9:, _.]*\"|\:([0-9]+)(?=\,|\]))"),
value_format))
area_format = QTextCharFormat()
area_format.setForeground(QColor("#11CC00"))
area_pattern = [
"\.([A-Za-z0-9_]{2,})(?=\\)|\\;)", "\(([0-9]{2,})\)",
"[0-9]+[.]+[0-9]+"
]
for pattern in area_pattern:
self.highlightingRules.append((QRegExp(pattern), area_format))
single_line_comment_format = QTextCharFormat()
single_line_comment_format.setForeground(Qt.gray)
self.highlightingRules.append(
(QRegExp("(<!--[^\n]*-->|//[^\n]*)"), single_line_comment_format))
# Multi lines comment
self.oql_start_comment = QRegExp("\/\*")
self.oql_end_comment = QRegExp('\*\/')
def __init__(self, document):
QSyntaxHighlighter.__init__(self, document.document())
#msgBox=QMessageBox()
#msgBox.setText(document.toPlainText())
#msgBox.exec()
# Multi-line strings (expression, flag, style)
# FIXME: The triple-quotes in these two lines will mess up the
# syntax highlighting from this point onward
self.tri_single = (QRegExp("'''"), 1, STYLES['string2'])
self.tri_double = (QRegExp('"""'), 2, STYLES['string2'])
rules = []
# All other rules
rules += [
# 'self'
(r'\bself\b', 0, STYLES['self']),
# Double-quoted string, possibly containing escape sequences
(r'"[^"\\]*(\\.[^"\\]*)*"', 0, STYLES['string']),
# Single-quoted string, possibly containing escape sequences
(r"'[^'\\]*(\\.[^'\\]*)*'", 0, STYLES['string']),
# 'def' followed by an identifier
(r'([?]\w+)', 1, STYLES['defclass']),
(r'([<][h][t][t][p][:][/][/]\w+[>])', 0, STYLES['uri']),
# 'class' followed by an identifier
(r'(\w+[:]\w+)', 1, STYLES['uri']),
# From '#' until a newline
(r'#[^\n]*', 0, STYLES['comment']),
# Numeric literals
(r'\b[+-]?[0-9]+[lL]?\b', 0, STYLES['numbers']),
(r'\b[+-]?0[xX][0-9A-Fa-f]+[lL]?\b', 0, STYLES['numbers']),
(r'\b[+-]?[0-9]+(?:\.[0-9]+)?(?:[eE][+-]?[0-9]+)?\b', 0, STYLES['numbers']),
]
# Keyword, operator, and brace rules
rules += [(r'\b%s\b' % w, 0, STYLES['keyword'])
for w in SPARQLHighlighter.keywords]
rules += [(r'%s' % o, 0, STYLES['operator'])
for o in SPARQLHighlighter.operators]
rules += [(r'%s' % b, 0, STYLES['brace'])
for b in SPARQLHighlighter.braces]
# Build a QRegExp for each pattern
self.rules = [(QRegExp(pat), index, fmt)
for (pat, index, fmt) in rules]
def __init__(self, parent=None):
"""Constructor."""
super(UstawieniaDialog, self).__init__(parent)
self.setupUi(self)
self.setWindowTitle(title_settings)
self.setWindowIcon(QtGui.QIcon(icon_settings))
self.setWindowFlags(Qt.WindowMinimizeButtonHint
| Qt.WindowSystemMenuHint
| Qt.WindowMinMaxButtonsHint
| Qt.WindowCloseButtonHint)
self.exit_btn.clicked.connect(self.reject)
self.contactMail_lineEdit.setValidator(
QRegExpValidator(QRegExp(r"[0-9a-zA-Z.\-\_\@\+]*")))
self.adminMail_lineEdit.setValidator(
QRegExpValidator(QRegExp(r"[0-9a-zA-Z.\-\_\@\+]*")))
def __init__(self, triplestoreconf, prefixes, prefixstore, comboBox):
super(QDialog, self).__init__()
self.setupUi(self)
self.triplestoreconf = triplestoreconf
self.prefixstore = prefixstore
self.comboBox = comboBox
self.prefixes = prefixes
for item in triplestoreconf:
self.tripleStoreChooser.addItem(item["name"])
self.tripleStoreChooser.currentIndexChanged.connect(
self.loadTripleStoreConfig)
#self.addTripleStoreButton.clicked.connect(self.addNewSPARQLEndpoint)
urlregex = QRegExp(
"http[s]?://(?:[a-zA-Z]|[0-9]|[$-_@.&+]|[!*\(\),]|(?:%[0-9a-fA-F][0-9a-fA-F]))+"
)
urlvalidator = QRegExpValidator(urlregex, self)
self.tripleStoreEdit.setValidator(urlvalidator)
self.tripleStoreEdit.textChanged.connect(self.check_state1)
self.tripleStoreEdit.textChanged.emit(self.tripleStoreEdit.text())
self.epsgEdit.setValidator(QIntValidator(1, 100000))
prefixregex = QRegExp("[a-z]+")
prefixvalidator = QRegExpValidator(prefixregex, self)
self.tripleStorePrefixNameEdit.setValidator(prefixvalidator)
self.addPrefixButton.clicked.connect(self.addPrefixToList)
self.removePrefixButton.clicked.connect(self.removePrefixFromList)
self.testConnectButton.clicked.connect(self.testTripleStoreConnection)
self.deleteTripleStore.clicked.connect(self.deleteTripleStoreFunc)
self.resetConfiguration.clicked.connect(self.restoreFactory)
self.newTripleStore.clicked.connect(self.createNewTripleStore)
#self.exampleQuery.textChanged.connect(self.validateSPARQL)
self.sparqlhighlighter = SPARQLHighlighter(self.exampleQuery)
self.tripleStorePrefixEdit.setValidator(urlvalidator)
self.tripleStorePrefixEdit.textChanged.connect(self.check_state2)
self.tripleStorePrefixEdit.textChanged.emit(
self.tripleStorePrefixEdit.text())
self.tripleStoreApplyButton.clicked.connect(
self.applyCustomSPARQLEndPoint)
self.tripleStoreCloseButton.clicked.connect(
self.closeTripleStoreDialog)
self.detectConfiguration.clicked.connect(
self.detectTripleStoreConfiguration)
s = QSettings() #getting proxy from qgis options settings
self.proxyEnabled = s.value("proxy/proxyEnabled")
self.proxyType = s.value("proxy/proxyType")
self.proxyHost = s.value("proxy/proxyHost")
self.proxyPort = s.value("proxy/proxyPort")
self.proxyUser = s.value("proxy/proxyUser")
self.proxyPassword = s.value("proxy/proxyPassword")
def __init__(self):
"""Constructor for the dialog.
"""
QDialog.__init__(self)
self.setupUi(self)
self.btnsave = self.buttonBox.button(QDialogButtonBox.Save)
self.saveCtrl()
re = QRegExp('[0-9.]+')
val = QRegExpValidator(re)
self.lineEdit_longitude.setValidator(val)
self.lineEdit_2_latitude.setValidator(val)
self.toolButton.setToolTip('Degree - decimal conversion')
self.toolButton.clicked.connect(self.trafo)
self.lineEdit_3.textChanged.connect(self.saveCtrl)
self.lineEdit_5.textChanged.connect(self.saveCtrl)
self.comboBox.currentIndexChanged.connect(self.saveCtrl)
self.funcs = VetEpiGISFuncs()
def _configure_table_editor_properties(self, base_table_editor):
qgis_version = QGis.QGIS_VERSION_INT
#Get scroll area first
scroll_area = base_table_editor.findChild(QScrollArea, "scrollArea")
if not scroll_area is None:
contents_widget = scroll_area.widget()
object_names = ['^mRefreshPushButton$'
] ##, '^mLayerLabel$', '^mLayerComboBox$', ]
for object_name in object_names:
name_regex = QRegExp(object_name)
for widget in contents_widget.findChildren(
QWidget, name_regex):
widget.setVisible(False)
# main_properties_groupbox = contents_widget.findChild(QGroupBox, "groupBox")
# #Version 2.4
# if qgis_version >= 20400 and qgis_version <= 20600:
# self._hide_filter_controls(main_properties_groupbox)
# if qgis_version >= 20600:
# feature_filter_groupbox = contents_widget.findChild(QGroupBox, "groupBox_5")
# if not feature_filter_groupbox is None:
# self._hide_filter_controls(feature_filter_groupbox)
appearance_groupbox = contents_widget.findChild(
QGroupBox, "groupBox_6")
appearance_groupbox.setVisible(True)
def clicked_event(self):
# Create the dialog
self.dlg_manager = EpaManager()
load_settings(self.dlg_manager)
# Manage widgets
reg_exp = QRegExp("^[A-Za-z0-9_]{1,16}$")
self.dlg_manager.txt_result_id.setValidator(QRegExpValidator(reg_exp))
# Fill combo box and table view
self.fill_combo_result_id()
self.dlg_manager.tbl_rpt_cat_result.setSelectionBehavior(
QAbstractItemView.SelectRows)
fill_table(self.dlg_manager.tbl_rpt_cat_result, 'v_ui_rpt_cat_result')
set_table_columns(self.dlg_manager,
self.dlg_manager.tbl_rpt_cat_result,
'v_ui_rpt_cat_result')
# Set signals
self.dlg_manager.btn_delete.clicked.connect(
partial(multi_rows_delete, self.dlg_manager.tbl_rpt_cat_result,
'rpt_cat_result', 'result_id'))
self.dlg_manager.btn_close.clicked.connect(
partial(close_dialog, self.dlg_manager))
self.dlg_manager.rejected.connect(
partial(close_dialog, self.dlg_manager))
self.dlg_manager.txt_result_id.editTextChanged.connect(
self.filter_by_result_id)
# Open form
open_dialog(self.dlg_manager, dlg_name='go2epa_manager')
def _accept(self):
filename = unicode(self.dlg.uXmlFile.text())
homedir = os.path.dirname(filename)
settings = QSettings()
settings.setValue(self.browsePathSetting, homedir)
if not filename:
QMessageBox.information(
self.dlg, "M150Xml error",
"You must specify a M150Xml file to import")
return
if not os.path.exists(filename):
QMessageBox.information(self.dlg, "M150Xml error",
"Cannot open " + filename)
return
#try:
if QRegExp('\.xml$', Qt.CaseInsensitive).indexIn(filename) > -1:
self.dlg.uXmlFile.setText(filename)
data = M150XmlImp(filename)
if self.dlg.uImportParcels.isChecked():
self._createHaltungsLayer(data)
if self.dlg.uImportMarks.isChecked():
self._createSchachtLayer(data)
if self.dlg.uImportObs.isChecked():
self._createInspektionsLayer(data)
self._createStationsLayer(data)
self._createInspektionsLayerSchacht(data)
self._createStationsLayerSchacht(data)
def pg_tables(schema="public", exclude_lookups=False):
"""
Returns a list of all the tables in the given schema minus the default PostGIS tables.
Views are also excluded. See separate function for retrieving views.
:rtype: list
"""
t = text(
"SELECT table_name FROM information_schema.tables WHERE table_schema = :tschema and table_type = :tbtype "
"ORDER BY table_name ASC")
result = _execute(t, tschema=schema, tbtype="BASE TABLE")
pgTables = []
for r in result:
tableName = r["table_name"]
# Remove default PostGIS tables
tableIndex = getIndex(_postGISTables, tableName)
if tableIndex != -1:
continue
if exclude_lookups:
# Validate if table is a lookup table and if it is, then omit
rx = QRegExp("check_*")
rx.setPatternSyntax(QRegExp.Wildcard)
if not rx.exactMatch(tableName):
pgTables.append(tableName)
else:
pgTables.append(tableName)
return pgTables
def __init__(self, parent, coord=None):
if not coord:
coord = [0, 0, 0, 0, True]
super(GeoLocalizationDialog, self).__init__(parent)
if platform.system() != "Linux":
font = QFont()
font.setFamily(u"Segoe UI Symbol")
self.setFont(font)
self.setupUi(self)
self.check_haveresources.setChecked(coord[4])
self.setModal(True)
self.btn_cancel.clicked.connect(lambda: self.done(QDialog.Rejected))
self.btn_add.clicked.connect(lambda: self.done(QDialog.Accepted))
self.spin_west_limit.setValue(float(str(coord[0]).replace(",", ".")))
self.spin_east_limit.setValue(float(str(coord[1]).replace(",", ".")))
self.spin_north_limit.setValue(float(str(coord[2]).replace(",", ".")))
self.spin_south_south.setValue(float(str(coord[3]).replace(",", ".")))
self.spin_west_limit.setDecimals(5)
self.spin_east_limit.setDecimals(5)
self.spin_north_limit.setDecimals(5)
self.spin_south_south.setDecimals(5)
self.superParent = None
temp = self.parent()
while self.superParent is None:
if issubclass(type(temp),
geographicinformationPanel.Ui_geographicinfo):
self.superParent = temp
else:
temp = temp.parent()
for info in self.findChildren(qwidgets.QPushButton, QRegExp('info_*')):
info.setIcon(qgui.QIcon(':/resourcesFolder/icons/help_icon.svg'))
info.setText('')
info.pressed.connect(self.printHelp)
def __init__(self, parent=None):
super(LCDefineDegradationWidget, self).__init__(parent)
self.setupUi(self)
self.classes = [self.tr("Tree-covered"),
self.tr("Grassland"),
self.tr("Cropland"),
self.tr("Wetland"),
self.tr("Artificial"),
self.tr("Bare land"),
self.tr("Water body")]
self.deg_def_matrix.setRowCount(len(self.classes))
self.deg_def_matrix.setColumnCount(len(self.classes))
self.deg_def_matrix.setHorizontalHeaderLabels(self.classes)
self.deg_def_matrix.setVerticalHeaderLabels(self.classes)
self.trans_matrix_default = [0, -1, -1, -1, -1, -1, 0, # Tree-covered
1, 0, 1, -1, -1, -1, 0, # grassland
1, -1, 0, -1, -1, -1, 0, # cropland
-1, -1, -1, 0, -1, -1, 0, # wetland
1, 1, 1, 1, 0, 1, 0, # artificial
1, 1, 1, 1, -1, 0, 0, # Other land
0, 0, 0, 0, 0, 0, 0] # water body
for row in range(0, self.deg_def_matrix.rowCount()):
for col in range(0, self.deg_def_matrix.columnCount()):
line_edit = TransMatrixEdit()
line_edit.setValidator(QRegExpValidator(QRegExp("[-0+]")))
line_edit.setAlignment(Qt.AlignHCenter)
self.deg_def_matrix.setCellWidget(row, col, line_edit)
self.trans_matrix_set()
# Setup the vertical label for the rows of the table
label_lc_baseline_year = VerticalLabel(self)
label_lc_baseline_year.setText(QtWidgets.QApplication.translate("DlgCalculateLC", "Land cover in initial year ", None))
sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Preferred, QtWidgets.QSizePolicy.Minimum)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(self.label_lc_target_year.sizePolicy().hasHeightForWidth())
label_lc_baseline_year.setSizePolicy(sizePolicy)
font = QFont()
font.setBold(True)
font.setWeight(75)
label_lc_baseline_year.setFont(font)
self.lc_trans_table_layout.addWidget(label_lc_baseline_year, 1, 0, 1, 1, Qt.AlignCenter)
self.deg_def_matrix.setStyleSheet('QTableWidget {border: 0px;}')
self.deg_def_matrix.horizontalHeader().setStyleSheet('QHeaderView::section {background-color: white;border: 0px;}')
self.deg_def_matrix.verticalHeader().setStyleSheet('QHeaderView::section {background-color: white;border: 0px;}')
self.deg_def_matrix.horizontalHeader().setResizeMode(QtWidgets.QHeaderView.Stretch)
self.deg_def_matrix.verticalHeader().setResizeMode(QtWidgets.QHeaderView.Stretch)
self.btn_transmatrix_reset.clicked.connect(self.trans_matrix_set)
self.btn_transmatrix_loadfile.clicked.connect(self.trans_matrix_loadfile)
self.btn_transmatrix_savefile.clicked.connect(self.trans_matrix_savefile)
self.legend_deg.setStyleSheet('QLineEdit {background: #AB2727;} QLineEdit:hover {border: 1px solid gray; background: #AB2727;}')
self.legend_imp.setStyleSheet('QLineEdit {background: #45A146;} QLineEdit:hover {border: 1px solid gray; background: #45A146;}')
self.legend_stable.setStyleSheet('QLineEdit {background: #FFFFE0;} QLineEdit:hover {border: 1px solid gray; background: #FFFFE0;}')
def create_fb(self):
""" Create a new empty fieldbook from template and add to layer list. Layer/file name changed to start with
'fb\\_' if neccessary.
"""
ofname, __ = QFileDialog.getSaveFileName(
self.iface.mainWindow(),
tr('New fieldbook'),
filter=tr('Fieldbook file (*.sqlite)'))
if not ofname:
return
if QRegExp('fb_').indexIn(QFileInfo(ofname).baseName()):
ofname = QDir.cleanPath(
QFileInfo(ofname).absolutePath() + QDir().separator() + 'fb_' +
QFileInfo(ofname).fileName())
ofbase = QDir.cleanPath(
QFileInfo(ofname).absolutePath() + QDir().separator() +
QFileInfo(ofname).baseName())
tempbase = QDir.cleanPath(self.plugin_dir + QDir().separator() +
'template' + QDir().separator() +
'fb_template')
QFile(tempbase + '.sqlite').copy(ofbase + '.sqlite')
fb = QgsVectorLayer(ofbase + '.sqlite',
QFileInfo(ofbase).baseName(), 'ogr')
if fb.isValid():
QgsProject.instance().addMapLayer(fb)
def filterModel(self, col=None):
if col != None:
self.proxyModel.setFilterKeyColumn(col)
expr = QRegExp("?*", Qt.CaseInsensitive, QRegExp.Wildcard)
self.proxyModel.setFilterRegExp(expr)
else:
self.proxyModel.setFilterRegExp(None)
def highlightBlock(self, text: str):
"""Highlight of a comment block"""
# for every pattern
for pattern, char_format in self.highlightingRules:
# Create a regular expression from the retrieved pattern
expression = QRegExp(pattern)
# Check what index that expression occurs at with the ENTIRE text
index = expression.indexIn(text)
# While the index is greater than 0
while index >= 0:
# Get the length of how long the expression is true,
# set the format from the start to the length with
# the text format
length = expression.matchedLength()
self.setFormat(index, length, char_format)
# Set index to where the expression ends in the text
index = expression.indexIn(text, index + length)
# Do multi-line strings
self.match_multiline(text, self.oql_start_comment,
self.oql_end_comment, 1, Qt.gray)
def create_coordlist(self):
""" Create a new coordinate list from template and add to layer list. Layer/file name changed to start with
'coord\\_' if neccessary.
"""
ofname, __ = QFileDialog.getSaveFileName(
self.iface.mainWindow(),
tr('QGIS co-ordinate list'),
filter=tr('SpatiaLite file (*.sqlite)'))
if not ofname:
return
if QRegExp('coord_').indexIn(QFileInfo(ofname).baseName()):
ofname = QDir.cleanPath(
QFileInfo(ofname).absolutePath() + QDir().separator() +
'coord_' + QFileInfo(ofname).fileName())
ofbase = QDir.cleanPath(
QFileInfo(ofname).absolutePath() + QDir().separator() +
QFileInfo(ofname).baseName())
tempbase = QDir.cleanPath(self.plugin_dir + QDir().separator() +
'template' + QDir().separator() +
'coord_template')
QFile(tempbase + '.sqlite').copy(ofbase + '.sqlite')
coord = QgsVectorLayer(ofbase + '.sqlite',
QFileInfo(ofbase).baseName(), 'ogr')
if coord.isValid():
QgsProject.instance().addMapLayer(coord)
def __init__(self, db_connector, uri, type, parent=None):
"""
Constructor
:param db: database connection instance
:param type: type of parameter to capture (database or schema)
:param parent: parent of dialog
"""
QDialog.__init__(self, parent)
self.type = type
self.db_connector = db_connector
self.uri = uri
self.parent = parent
self.setupUi(self)
if self.type == 'database':
self.message_label.setText(
QCoreApplication.translate("GetDBOrSchemaNameDialog",
"Enter the name of the database:"))
self.parameter_line_edit.setPlaceholderText(
QCoreApplication.translate(
"GetDBOrSchemaNameDialog",
"[Name of the database to be created]"))
else:
self.message_label.setText(
QCoreApplication.translate("GetDBOrSchemaNameDialog",
"Enter the name of the schema:"))
self.parameter_line_edit.setPlaceholderText(
QCoreApplication.translate(
"GetDBOrSchemaNameDialog",
"[Name of the schema to be created]"))
self.setWindowTitle(
QCoreApplication.translate("GetDBOrSchemaNameDialog",
"Create {type}").format(type=self.type))
self.validators = Validators()
# schema name mustn't have special characters
regex = QRegExp("[a-zA-Z0-9_]+")
validator = QRegExpValidator(regex)
self.parameter_line_edit.setValidator(validator)
self.parameter_line_edit.setMaxLength(63)
self.parameter_line_edit.textChanged.connect(
self.validators.validate_line_edits_lower_case)
self.parameter_line_edit.textChanged.emit(
self.parameter_line_edit.text())
self.bar = QgsMessageBar()
self.bar.setSizePolicy(QSizePolicy.Minimum, QSizePolicy.Fixed)
self.layout().addWidget(self.bar, 0, 0, Qt.AlignTop)
self.buttonBox.accepted.disconnect()
self.buttonBox.accepted.connect(self.accepted)
self.buttonBox.clear()
self.buttonBox.addButton(QDialogButtonBox.Cancel)
self.buttonBox.addButton(
QCoreApplication.translate("GetDBOrSchemaNameDialog",
"Create {type}").format(type=self.type),
QDialogButtonBox.AcceptRole)
def __init__(self,
column,
row,
triplestoreconf,
prefixes,
interlinkOrEnrich,
table,
propOrClass=False,
bothOptions=False,
currentprefixes=None,
addVocab=None):
super(QDialog, self).__init__()
self.setupUi(self)
self.currentcol = column
self.currentrow = row
self.table = table
self.prefixes = prefixes
self.currentprefixes = currentprefixes
self.bothOptions = bothOptions
self.triplestoreconf = triplestoreconf
self.interlinkOrEnrich = interlinkOrEnrich
self.addVocab = addVocab
if column != 4:
self.findConcept.setChecked(True)
if column == 4 or (not interlinkOrEnrich
and column != 4) or (not interlinkOrEnrich
and propOrClass):
self.findProperty.setChecked(True)
if not bothOptions:
self.findProperty.setEnabled(False)
self.findConcept.setEnabled(False)
self.tripleStoreEdit.setEnabled(False)
for triplestore in self.triplestoreconf:
if not "File" == triplestore["name"]:
self.tripleStoreEdit.addItem(triplestore["name"])
if addVocab != None:
for cov in addVocab:
self.tripleStoreEdit.addItem(addVocab[cov]["label"])
self.searchButton.clicked.connect(self.getClassesFromLabel)
urlregex = QRegExp(
"http[s]?://(?:[a-zA-Z#]|[0-9]|[$-_@.&+]|[!*\(\),]|(?:%[0-9a-fA-F][0-9a-fA-F]))+"
)
urlvalidator = QRegExpValidator(urlregex, self)
self.costumproperty.setValidator(urlvalidator)
self.costumproperty.textChanged.connect(self.check_state3)
self.costumproperty.textChanged.emit(self.costumproperty.text())
self.costumpropertyButton.clicked.connect(self.applyConceptToColumn2)
self.applyButton.clicked.connect(self.applyConceptToColumn)
s = QSettings() #getting proxy from qgis options settings
self.proxyEnabled = s.value("proxy/proxyEnabled")
self.proxyType = s.value("proxy/proxyType")
self.proxyHost = s.value("proxy/proxyHost")
self.proxyPort = s.value("proxy/proxyPort")
self.proxyUser = s.value("proxy/proxyUser")
self.proxyPassword = s.value("proxy/proxyPassword")
if self.proxyHost != None and self.ProxyPort != None:
proxy = urllib.ProxyHandler({'http': proxyHost})
opener = urllib.build_opener(proxy)
urllib.install_opener(opener)
def __init__(self, settings):
super(ConfigDialog, self).__init__(None)
self.setupUi(self)
SettingDialog.__init__(self, settings)
self.settings = settings
regex = QRegExp(MUNCODE_REGEX, Qt.CaseInsensitive)
self.muncodeValidator = QRegExpValidator(regex)
self.kommunefilter.setValidator(self.muncodeValidator)
def supporting_doc_tables_regexp():
"""
:return: Returns an instance of a Regex class for filtering supporting
documents tables in the database.
:rtype: QRegExp
"""
doc_tables_filter = "|".join(SUPPORTING_DOC_TAGS)
return QRegExp(doc_tables_filter)
def prepareLayout(self):
"""Przygotowanie layoutu CSW"""
self.host_lineEdit.setValidator(QRegExpValidator(QRegExp(r"\S*")))
self.readSettings("csw") # wczytaj zapisane wartości
self.cancel_btn.clicked.connect(self.close)
self.send_btn.clicked.connect(self.send_btn_clicked)
self.save_btn.clicked.connect(lambda: self.saveSettings("csw"))
def __init__(self, parent):
super(InlineServiceOperation, self).__init__(parent)
if platform.system() != "Linux":
font = QFont()
font.setFamily(u"Segoe UI Symbol")
self.setFont(font)
self.setupUi(self)
self.parent = parent
self.superParent = parent.superParent
self.combo_items_dcp = customCombo.dic_to_CustomComboBox_dic(
self.superParent.codelist["DCPCodeList"])
tla.setupListView(self.dcp, CustomComboBox, self, comboList=list(self.combo_items_dcp.values()), NoParent=True)
tla.setupListView(self.connectionPoint, QgsFilterLineEdit, self, NoParent=True)
tla.setupMandatoryField(None, self.operationName, self.label_operationName, u"Elemento Obrigatório.", )
tla.setupMandatoryField(None, self.dcp, self.label_dcp, u"Obrigatório conter pelo menos uma entrada")
tla.setupMandatoryField(None, self.connectionPoint, self.label_connectionPoint, u"Obrigatório conter pelo menos uma entrada")
for btn in self.findChildren(QPushButton, QRegExp('btn_*')):
if '_add_' in btn.objectName():
btn.setIcon(QIcon(':/resourcesFolder/icons/plus_icon.svg'))
btn.setText('')
elif '_del_' in btn.objectName():
btn.setIcon(QIcon(':/resourcesFolder/icons/delete_icon.svg'))
btn.setText('')
for info in self.findChildren(QPushButton, QRegExp('info_*')):
info.setIcon(QIcon(':/resourcesFolder/icons/help_icon.svg'))
info.setText('')
info.pressed.connect(self.printHelp)
self.operationName.editingFinished.connect(self.update_title)
self.update_title()
self.btn_del_operation.setToolTip(u"Agagar Operação.")
self.eater = tla.EatWheel()
for x in self.findChildren(QComboBox):
x.installEventFilter(self.eater)
x.setFocusPolicy(Qt.StrongFocus)
for x in self.findChildren(QDateTimeEdit):
x.installEventFilter(self.eater)
x.setFocusPolicy(Qt.StrongFocus)
self.btn_del_operation.clicked.connect(self.deleteOperation)
self.dcp.model().dataChanged.connect(self.update_title)
self.connectionPoint.model().dataChanged.connect(self.update_title)
self.combo_dcp.setCurrentIndex(self.combo_dcp.findText("WebServices"))
def __init__(self, parent=None, iface=None):
"""Constructor for import dialog.
.. versionadded: 3.3
:param parent: Optional widget to use as parent.
:type parent: QWidget
:param iface: An instance of QgisInterface.
:type iface: QgisInterface
"""
QDialog.__init__(self, parent)
self.parent = parent
self.setupUi(self)
title = self.tr('PetaBencana Downloader')
self.setWindowTitle(title)
icon = resources_path('img', 'icons', 'add-petabencana-layer.svg')
self.setWindowIcon(QtGui.QIcon(icon))
self.iface = iface
self.source = None
self.radio_button_group = QButtonGroup()
self.radio_button_group.addButton(self.radio_button_production)
self.radio_button_group.addButton(self.radio_button_development)
self.radio_button_group.setExclusive(True)
self.radio_button_production.setChecked(True)
self.populate_combo_box()
developer_mode = setting('developer_mode', False, bool)
if not developer_mode:
self.radio_button_widget.hide()
self.source_label.hide()
self.output_group.adjustSize()
# signals
self.radio_button_production.clicked.connect(self.populate_combo_box)
self.radio_button_development.clicked.connect(self.populate_combo_box)
# Set up things for context help
self.help_button = self.button_box.button(
QtWidgets.QDialogButtonBox.Help)
# Allow toggling the help button
self.help_button.setCheckable(True)
self.help_button.toggled.connect(self.help_toggled)
self.main_stacked_widget.setCurrentIndex(1)
# set up the validator for the file name prefix
expression = QRegExp('^[A-Za-z0-9-_]*$')
validator = QtGui.QRegExpValidator(expression, self.filename_prefix)
self.filename_prefix.setValidator(validator)
self.time_stamp = None
self.restore_state()
def searchTextChanged(self, text):
"""Process a change in the search filter text."""
# user adding characters and has exceeded 3 or more, or is removing characters
if len(text) >= 3 or len(self.searchText) > len(text):
regex = QRegExp(text, Qt.CaseInsensitive, QRegExp.RegExp)
self.proxyModel.setFilterRegExp(regex)
self.treeView.expandAll()
# update last search text state
self.searchText = text
def __init__(self, parent):
super(ServiceOperationsWidget, self).__init__(parent)
self.setupUi(self)
self.op_box.setAlignment(Qt.AlignTop)
self.superParent = self.parent()
self.operationList = []
self.btn_add_operations.clicked.connect(self.add_operation)
self.check_mandatory_operations()
for btn in self.findChildren(QPushButton, QRegExp('btn_*')):
if '_add_' in btn.objectName():
btn.setIcon(QIcon(':/resourcesFolder/icons/plus_icon.svg'))
# btn.setText('')
elif '_del_' in btn.objectName():
btn.setIcon(QIcon(':/resourcesFolder/icons/delete_icon.svg'))
btn.setText('')
for info in self.findChildren(QPushButton, QRegExp('info_*')):
info.setIcon(QIcon(':/resourcesFolder/icons/help_icon.svg'))
info.setText('')
info.pressed.connect(self.printHelp)