def __init__(self, sample, readout=None):
self.sample = sample
if readout is None:
self.readout = sample.readout
else:
self.readout = readout
self.comment = None
self.mode = None
self.x_set_obj = None
self.y_set_obj = None
self.z_set_obj = None
self.dirname = None
self.data_dir = None
self.plotSuffix = ''
self.hold = False
self.show_progress_bar = True
self.ReadoutTrace = False
self.open_qviewkit = True
self.create_averaged_data = False
self.qviewkit_singleInstance = True
self._qvk_process = False
self._plot_comment = ''
self.multiplex_attribute = "readout_pulse_frequency"
self.multiplex_unit = "Hz"
self.init = iniTD(sample)
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'timedomain'
self._measurement_object.sample = self.sample
def __init__(self, IV_Device, exp_name = '', sample = None):
self.IVD = IV_Device
self.exp_name = exp_name
self._sample = sample
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = True
self._plot_comment=""
self.set_log_function()
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'transport'
self._measurement_object.sample = self._sample
self._qvk_process = False
self.number_of_timetraces = 1 #relevant in time domain mode
def __init__(self,
quartz=None,
ohmmeter=None,
mfc=None,
film_name='',
sample=None):
self.quartz = quartz
self.ohmmeter = ohmmeter
self.mfc = mfc
self.film_name = film_name
self._sample = sample
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = False
self._show_ideal = False
self._fit_resistance = False
self._fit_every = 1
self._fit_points = 5
self._p0 = None
self._reference_uid = None
self._plot_comment = ""
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'sputter_deposition'
self._measurement_object.sample = self._sample
self._qvk_process = True
self._duration = 60. # Duration of monitoring
self._resolution = 2. # How often values should be taken
self._target_resistance = 1000.
self._target_thickness = 20.
self._target_marker = False
self._depmon_queue = Queue(
) # for communication with the depmon thread
def __init__(self):
self.exp_name = None
self.dirname = "" # TODO new name
self.comment = ""
self.sourcecode = ""
self.sample = None
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'TimeDomain'
self._measurement_object.sample = self.sample
# data
self.coords = {}
self.values = {}
def __init__(self, vna, exp_name = '', sample = None):
self.vna = vna
self.averaging_start_ready = "start_measurement" in self.vna.get_function_names() and "ready" in self.vna.get_function_names()
if not self.averaging_start_ready: logging.warning(__name__ + ': With your VNA instrument driver (' + self.vna.get_type() + '), I can not see when a measurement is complete. So I only wait for a specific time and hope the VNA has finished. Please consider implemeting the necessary functions into your driver.')
self.exp_name = exp_name
self._sample = sample
self.landscape = None
self.span = 200e6 #[Hz]
self.tdx = 0.002 #[s]
self.tdy = 0.002 #[s]
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = True
self._fit_resonator = False
self._plot_comment=""
self.set_log_function()
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'spectroscopy'
self._measurement_object.sample = self._sample
self._qvk_process = False
self.number_of_timetraces = 1 #relevant in time domain mode
def __init__(self, vna, exp_name='', sample=None):
self.vna = vna
self.averaging_start_ready = "start_measurement" in self.vna.get_function_names(
) and "ready" in self.vna.get_function_names()
if not self.averaging_start_ready:
logging.warning(
__name__ + ': With your VNA instrument driver (' +
self.vna.get_type() +
'), I can not see when a measurement is complete. So I only wait for a specific time and hope the VNA has finished. Please consider implemeting the necessary functions into your driver.'
)
self.exp_name = exp_name
self._sample = sample
self.landscape = None
self.span = 200e6 #[Hz]
self.tdx = 0.002 #[s]
self.tdy = 0.002 #[s]
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = True
self._fit_resonator = False
self._plot_comment = ""
self.set_log_function()
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'spectroscopy'
self._measurement_object.sample = self._sample
self._qvk_process = False
self.number_of_timetraces = 1 #relevant in time domain mode
def __init__(self, sig_analyzer, exp_name='', sample=None):
self.sig_analyzer = sig_analyzer
self.averaging_start_ready = "start_measurement" in self.sig_analyzer.get_function_names() \
and "ready" in self.sig_analyzer.get_function_names()
if not self.averaging_start_ready:
logging.warning(
__name__ + ': With your signal analyzer driver (' +
self.sig_analyzer.get_type() + '),'
' I can not see when a measurement is complete. '
'So I only wait for a specific time and hope the VNA has finished. '
'Please consider implemeting the necessary functions into your driver.'
)
self.exp_name = exp_name
self._sample = sample
self.landscape = None
self.span = 200e6 # [Hz]
self.tdx = 0.002 # [s]
self.tdy = 0.002 # [s]
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = True
self._plot_comment = ""
self.set_log_function()
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'spectroscopy'
self._measurement_object.sample = self._sample
self._qvk_process = False
class SputterMonitor(object):
"""
Sputter monitoring class, derived from spectroscopy.py
monitors and stores sputter parameters live during deposition
facilitates dynamic flow adjustment
Example:
m = SPUTTER_Monitor(quartz, ohmmeter, film_name, sample)
m.set_filmparameters() ... see in corresponding docstring
m.monitor_depo()
Args:
quartz (Instrument): The quartz oscillator instrument measuring thickness and rate.
ohmmeter (Instrument): The resistance measurement instrument.
mfc (Instrument): The mass flow controller instrument.
film_name (str): A name can be given, that is added to the directory and filename.
sample (Sample): A sample object can be given that is stored in the h5 file.
Attributes:
Should be listed here... Until then, use tabbing.
"""
def __init__(self,
quartz=None,
ohmmeter=None,
mfc=None,
film_name='',
sample=None):
self.quartz = quartz
self.ohmmeter = ohmmeter
self.mfc = mfc
self.film_name = film_name
self._sample = sample
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = False
self._show_ideal = False
self._fit_resistance = False
self._fit_every = 1
self._fit_points = 5
self._p0 = None
self._reference_uid = None
self._plot_comment = ""
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'sputter_deposition'
self._measurement_object.sample = self._sample
self._qvk_process = True
self._duration = 60. # Duration of monitoring
self._resolution = 2. # How often values should be taken
self._target_resistance = 1000.
self._target_thickness = 20.
self._target_marker = False
self._depmon_queue = Queue(
) # for communication with the depmon thread
def set_duration(self, duration=60.):
"""
Set the duration for the monitoring. Better too long than too short.
Args:
duration (float): Monitoring duration in seconds.
"""
self._duration = duration
def get_duration(self):
"""
Get the duration for the monitoring.
Returns:
duration (float): Monitoring duration in seconds.
"""
return self._duration
def set_resolution(self, resolution=2.0):
"""
Set the resolution for the monitoring.
Every x second, the parameters will be read and stored.
Args:
resolution (float): Monitoring resolution in seconds.
"""
self._resolution = resolution
def get_resolution(self):
"""
Get the resolution for the monitoring.
Every x second, the parameters will be read and stored.
Returns:
resolution (float): Monitoring resolution in seconds.
"""
return self._resolution
def set_filmparameters(self,
resistance=1000.,
thickness=20.,
target_marker=False):
"""
Set the target parameters of the film to be deposited.
They are used to calculate the ideal trend of the measured parameters and their deviation from the ideal.
Args:
resistance (float): The target sheet resistance in Ohm.
thickness (float): The target thickness in nm.
target_marker (bool): Display a cross marking the target resistance and thickness.
"""
self._target_resistance = resistance
self._target_thickness = thickness
self._target_marker = target_marker
def get_filmparameters(self):
"""
Get the set film parameters.
Returns:
Tuple containing:
[0]: target_resistance (float): The target sheet resistance in Ohm.
[1]: target_thickness (float): The target thickness in nm.
"""
return self._target_resistance, self._target_thickness
def ideal_resistance(self, thickness):
"""
Calculates the ideal resistance at a given thickness depending on the set film parameters.
Args:
thickness (float): Film thickness in nm for which the ideal resistance should be calculated.
Returns:
The ideal resistance as a float.
"""
try:
return 1. / (thickness * (1. / self._target_resistance) /
self._target_thickness)
except:
return np.nan
def ideal_trend(self):
"""
Calculates a list of ideal resistances that is used as comparison in a view together with the real values.
"""
t = np.linspace(1, self._target_thickness, 300)
return [t, self.ideal_resistance(t)]
def set_fit(self, fit=False, fit_every=1, fit_points=5, p0=None):
"""
Settings for the fit used to estimate final resistance at target thickness and thickness at target resistance.
Args:
fit (bool): Turn on the fit.
fit_every (int): Fit after every x measurement.
fit_points (int): Fit to the last x points.
p0 (list): Provide initial values for the curvefit.
"""
self._fit_resistance = fit
self._fit_every = fit_every
self._fit_points = fit_points
self._p0 = p0
def set_reference_uid(self, uid=None):
"""
Set a UID to be shown as a reference trace in the "resistance_thickness" view.
Args:
uid (str): The UID of the h5 file from which the resistance and thickness data is to be displayed.
"""
try:
ref = hdf.Data(qkit.fid[uid])
self._ref_resistance = ref.data.resistance[:]
self._ref_thickness = ref.data.thickness[:]
self._reference_uid = uid
ref.close()
return self._reference_uid
except:
self._reference_uid = None
return "Invalid UID"
def set_resistance_4W(self, four_wire=False):
"""
Sets 2 (default) or 4 wire measurement mode, if the device supports it.
Args:
four_wire = False
"""
self.ohmmeter.set_measure_4W(four_wire)
def get_rate(self, test_thickness):
"""
Tests deposition rate.
Args:
test_thickness (in nm)
"""
self.quartz.set_timer_zero()
self.quartz.set_thickness_zero()
time.sleep(3)
while self.quartz.get_thickness() < test_thickness * 1e-2:
time.sleep(1)
mins, secs = self.quartz.get_time().split(':')
t = 60 * float(mins) + float(secs)
rate = test_thickness / t
return rate, t
def _theory(self, thickness, thickness_start, conductivity,
cond_per_layer):
"""
Calculate a prediction for the resistance at a certain film thickness,
given the current thickness, current conductivity and added conductivity per layer.
Args:
thickness (float): Film thickness for which the resistance shall be predicted
thickness_start (float): Film thickness at the start of the prediction.
conductivity (float): Film conductivity at the start of the prediction.
cond_per_layer (float): Added conductivity per layer for the remaining film growth.
Returns:
The projected film resistance (float).
"""
t_added = thickness - thickness_start
try:
return 1. / (conductivity + t_added * cond_per_layer)
except:
return np.nan
def _linear(self, x, a, b):
"""
Helper function providing a linear fitting function.
"""
return a * x + b
def _fit_layer(self, t_points, R_points):
"""
Fit the changing film resistance to extract the gained conductivity per layer.
This is then used to project the final film resistance with the provided target film parameters.
Args:
t_points (numpy array): Thickness data from which the conductivity per layer is to be extracted.
R_points (numpy array): Resistance data from which the conductivity per layer is to be extracted.
Returns:
Tuple containing:
[0]: t_final (float): The predicted thickness at which the target resistance will be reached.
[1]: R_final (float): The predicted resistance that will be reached at the target thickness.
[2]: popt[0] (float): Conductivity per layer as obtained by linear fit.
"""
# ToDo: Store all fits, Store time of fit to sync it to other datasets, revise theory.
for i in R_points:
if i == 0:
return [np.nan, np.nan, np.nan]
try:
c_target = 1. / self._target_resistance
c_points = 1. / R_points
popt, _ = curve_fit(self._linear, t_points, c_points, p0=self._p0)
R_final = self._theory(self._target_thickness, t_points[0],
c_points[0], popt[0])
t_final = ((c_target - c_points[-1]) / popt[0]) + t_points[-1]
return [t_final, R_final, popt[0]]
except:
return [np.nan, np.nan, np.nan]
def _reciprocal(self, thickness, cond_per_layer):
"""
Function used by the curvefit routine.
Args:
thickness: Film thickness in nm.
cond_per_layer: Film conductance per layer.
Returns:
The resistance for the given parameters as a float.
"""
try:
return 1. / (thickness * cond_per_layer)
except:
return np.nan
def _fit_trend(self, t_points, R_points):
"""
Do the fit used to estimate final resistance at target thickness and thickness at target resistance.
Args:
t_points: The last x points of film thickness in nm.
R_points: The last x points of film resistivity in Ohm.
Returns:
List of [R_final, t_final] with
R_final (float): Estimated final resistance at target thickness.
t_final (float): Estimated thickness at target resistance.
"""
for i in t_points:
if i == 0:
return [np.nan, np.nan]
try:
self._popt, _ = curve_fit(self._reciprocal,
t_points,
R_points,
p0=self._p0)
t_final = 1. / (self._target_resistance * self._popt[0])
R_final = 1. / (self._target_thickness * self._popt[0])
return [t_final, R_final]
except:
return [np.nan, np.nan]
def _prepare_measurement_quartz(self):
"""
All the relevant settings from the quartz are updated and called.
"""
# self.quartz.get_all()
# self.quartz.get_frequency() # Store it somewhere
pass
def _prepare_measurement_ohmmeter(self):
"""
All the relevant settings from the ohmmeter are updated and called.
"""
# self.ohmmeter.get_all()
pass
def _prepare_measurement_mfc(self):
"""
All the relevant settings from the ohmmeter are updated and called.
"""
# self.mfc.get_all()
self.Ar_channel = self.mfc.predef_channels['Ar']
self.ArO_channel = self.mfc.predef_channels['ArO']
pass
def _prepare_monitoring_file(self):
"""
Creates the output .h5-file with distinct the required datasets and views.
At this point all measurement parameters are known and put in the output file.
"""
self._data_file = hdf.Data(name=self._file_name, mode='a')
self._measurement_object.uuid = self._data_file._uuid
self._measurement_object.hdf_relpath = self._data_file._relpath
self._measurement_object.instruments = qkit.instruments.get_instrument_names(
)
self._measurement_object.save()
self._mo = self._data_file.add_textlist('measurement')
self._mo.append(self._measurement_object.get_JSON())
# write logfile and instrument settings
self._write_settings_dataset()
self._log = waf.open_log_file(self._data_file.get_filepath())
'''
Time record
'''
self._data_time = self._data_file.add_value_vector('time',
x=None,
unit='s')
'''
Quartz datasets
'''
self._data_rate = self._data_file.add_value_vector(
'rate', x=self._data_time, unit='nm/s', save_timestamp=False)
self._data_thickness = self._data_file.add_value_vector(
'thickness', x=self._data_time, unit='nm', save_timestamp=False)
'''
Ohmmeter datasets
'''
self._data_resistance = self._data_file.add_value_vector(
'resistance', x=self._data_time, unit='Ohm', save_timestamp=False)
self._data_conductance = self._data_file.add_value_vector(
'conductance', x=self._data_time, unit='S', save_timestamp=False)
self._data_deviation_abs = self._data_file.add_value_vector(
'deviation_absolute',
x=self._data_time,
unit='Ohm',
save_timestamp=False)
self._data_deviation_rel = self._data_file.add_value_vector(
'deviation_relative',
x=self._data_time,
unit='relative',
save_timestamp=False)
'''
MFC datasets
'''
# FIXME: units?
if self.mfc:
self._data_pressure = self._data_file.add_value_vector(
'pressure',
x=self._data_time,
unit='ubar',
save_timestamp=False)
self._data_Ar_flow = self._data_file.add_value_vector(
'Ar_flow',
x=self._data_time,
unit='sccm',
save_timestamp=False)
self._data_ArO_flow = self._data_file.add_value_vector(
'ArO_flow',
x=self._data_time,
unit='sccm',
save_timestamp=False)
'''
Calculate ideal trend and create record
'''
self._thickness_coord = self._data_file.add_coordinate(
'thickness_coord', unit='nm')
self._thickness_coord.add(self.ideal_trend()[0])
if self._show_ideal:
self._data_ideal = self._data_file.add_value_vector(
'ideal_resistance',
x=self._thickness_coord,
unit='Ohm',
save_timestamp=False)
self._data_ideal.append(self.ideal_trend()[1])
'''
Create target marker
'''
if self._target_marker:
self._target_thickness_line = self._data_file.add_value_vector(
'target_thickness', x=None, unit='nm', save_timestamp=False)
self._target_thickness_line.append([
0.8 * self._target_thickness, self._target_thickness,
self._target_thickness, self._target_thickness,
self._target_thickness, 1.2 * self._target_thickness
])
self._target_resistance_line = self._data_file.add_value_vector(
'target_resistance', x=None, unit='Ohm', save_timestamp=False)
self._target_resistance_line.append([
self._target_resistance, self._target_resistance,
1.2 * self._target_resistance, 0.8 * self._target_resistance,
self._target_resistance, self._target_resistance
])
self._target_conductance_line = self._data_file.add_value_vector(
'target_conductance', x=None, unit='S', save_timestamp=False)
self._target_conductance_line.append([
1. / self._target_resistance, 1. / self._target_resistance,
1. / 1.2 / self._target_resistance,
1. / 0.8 / self._target_resistance,
1. / self._target_resistance, 1. / self._target_resistance
])
'''
Estimation datasets
'''
if self._fit_resistance:
self._thickness_estimation = self._data_file.add_value_vector(
'thickness_estimation',
x=None,
unit='nm',
save_timestamp=False)
self._resistance_estimation = self._data_file.add_value_vector(
'resistance_estimation',
x=None,
unit='Ohm',
save_timestamp=False)
self._last_resistance_fit = self._data_file.add_value_vector(
'last_resistance_fit',
x=None,
unit='Ohm',
save_timestamp=False)
'''
Reference dataset
'''
if not self._reference_uid == None:
self._thickness_reference = self._data_file.add_value_vector(
'thickness_reference', x=None, unit='nm', save_timestamp=False)
self._thickness_reference.append(self._ref_thickness)
self._resistance_reference = self._data_file.add_value_vector(
'reference_' + self._reference_uid,
x=None,
unit='Ohm',
save_timestamp=False)
self._resistance_reference.append(self._ref_resistance)
'''
Create Views
'''
self._resist_view = self._data_file.add_view('resistance_thickness',
x=self._data_thickness,
y=self._data_resistance)
if self._show_ideal:
self._resist_view.add(x=self._thickness_coord, y=self._data_ideal)
if self._target_marker:
self._resist_view.add(x=self._target_thickness_line,
y=self._target_resistance_line)
if not self._reference_uid == None:
self._resist_view.add(x=self._thickness_reference,
y=self._resistance_reference)
if self._fit_resistance:
self._resist_view.add(x=self._thickness_coord,
y=self._last_resistance_fit)
self._conductance_view = self._data_file.add_view(
'conductance_thickness',
x=self._data_thickness,
y=self._data_conductance)
if self._target_marker:
self._conductance_view.add(x=self._target_thickness_line,
y=self._target_conductance_line)
self._deviation_abs_view = self._data_file.add_view(
'deviation_absolute',
x=self._data_thickness,
y=self._data_deviation_abs)
self._deviation_rel_view = self._data_file.add_view(
'deviation_relative',
x=self._data_thickness,
y=self._data_deviation_rel)
'''
Create comment
'''
if self.comment:
self._data_file.add_comment(self.comment)
'''
Open GUI
'''
if self.qviewkit_singleInstance and self.open_qviewkit and self._qvk_process:
self._qvk_process.terminate() # terminate an old qviewkit instance
def _write_settings_dataset(self):
"""
Writes a dataset containing the settings of the measurement instruments.
"""
self._settings = self._data_file.add_textlist('settings')
settings = waf.get_instrument_settings(self._data_file.get_filepath())
self._settings.append(settings)
def _init_depmon(self):
"""
Initializes the measurement, the required files and instruments.
Should only be called by the main functions monitor_depo or start_depmon.
"""
self._measurement_object.measurement_func = 'sputter_monitoring'
self._measurement_object.x_axis = 'time'
self._measurement_object.y_axis = ''
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = True
if not self.dirname:
self.dirname = 'SPUTTER_monitoring'
self._file_name = self.dirname.replace(' ', '').replace(',', '_')
if self.film_name:
self._file_name += '_' + self.film_name
self.x_vec = np.arange(0, self._duration, self._resolution)
self._prepare_measurement_quartz()
self._prepare_measurement_ohmmeter()
if self.mfc:
self._prepare_measurement_mfc()
self._prepare_monitoring_file()
def _acquire(self, mon_data):
"""
Acquires and stores current information from the instruments.
Should only be called by main functions monitor_depo or start_depmon.
"""
self._data_time.append(time.time() - mon_data.t0)
# mon_data.resistance.append(self.ohmmeter.get_resistance())
mon_data.resistance = np.append(mon_data.resistance,
self.ohmmeter.get_resistance())
if self.quartz:
rate = self.quartz.get_rate(nm=True)
# mon_data.thickness.append(self.quartz.get_thickness(nm=True))
mon_data.thickness = np.append(mon_data.thickness,
self.quartz.get_thickness(nm=True))
if self.mfc:
pressure = self.mfc.get_pressure()
Ar_flow = self.mfc.get_flow(self.Ar_channel)
ArO_flow = self.mfc.get_flow(self.ArO_channel)
if mon_data.resistance[-1] > 1.e9:
mon_data.resistance[-1] = np.nan
self._data_resistance.append(mon_data.resistance[-1])
if not mon_data.resistance[-1] == 0:
self._data_conductance.append(1. / mon_data.resistance[-1])
else:
self._data_conductance.append(np.nan)
if self.quartz:
self._data_rate.append(rate)
self._data_thickness.append(mon_data.thickness[-1])
if self.mfc:
self._data_pressure.append(pressure)
self._data_Ar_flow.append(Ar_flow)
self._data_ArO_flow.append(ArO_flow)
if self.quartz:
deviation_abs = mon_data.resistance[-1] - self.ideal_resistance(
mon_data.thickness[-1])
deviation_rel = deviation_abs / self._target_resistance
self._data_deviation_abs.append(deviation_abs)
self._data_deviation_rel.append(deviation_rel)
if ((self._fit_resistance) and (mon_data.it % self._fit_every == 0)
and (len(mon_data.resistance) >= self._fit_points)):
"""
# OLD ROUTINE
estimation = self._fit_trend(mon_data.thickness[-self._fit_points:None],
mon_data.resistance[-self._fit_points:None])
self._thickness_estimation.append(estimation[0])
self._resistance_estimation.append(estimation[1])
self._last_resistance_fit.append(self._reciprocal(self.ideal_trend()[0],self._popt[0]), reset=True)
"""
estimation = self._fit_layer(
mon_data.thickness[-self._fit_points:None],
mon_data.resistance[-self._fit_points:None])
self._thickness_estimation.append(estimation[0])
self._resistance_estimation.append(estimation[1])
self._last_resistance_fit.append(self._theory(
self.ideal_trend()[0], mon_data.thickness[-1],
1. / mon_data.resistance[-1], estimation[2]),
reset=True)
def monitor_depo(self):
"""
Main sputter deposition monitoring function.
Consider using the threaded version by calling start_depmon().
Records the film resistance, thickness and deposition rate live during the sputter process.
Stores everything into a h5 file.
Provides measures to estimate the resulting resistance of the final film and thereby
facilitates live adjustments to the sputter parameters.
Note:
set_duration and set_resolution should be called before to set the monitoring length and time resolution.
set_filmparameters should be called before to provide the actual target values.
"""
self._init_depmon()
if self.progress_bar:
self._p = Progress_Bar(
self._duration / self._resolution,
'EVAP_timetrace ' + self.dirname,
self._resolution) # FIXME: Doesn't make much sense...
print('Monitoring deposition...')
sys.stdout.flush()
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(
self._data_file.get_filepath(),
datasets=['views/resistance_thickness'])
try:
"""
Initialize the data lists.
"""
class MonData(object):
resistance = np.array([])
thickness = np.array([])
mon_data = MonData()
"""
Main loop:
"""
mon_data.t0 = time.time(
) # note: Windows has limitations on time precision (about 16ms)
for mon_data.it, _ in enumerate(self.x_vec):
self._acquire(mon_data)
if self.progress_bar:
self._p.iterate()
# calculate the time when the next iteration should take place
ti = mon_data.t0 + (float(mon_data.it) + 1) * self._resolution
# wait until the total dt(iteration) has elapsed
while time.time() < ti:
time.sleep(0.05)
except KeyboardInterrupt:
print('Monitoring interrupted by user.')
except Exception as e:
print(e)
print(e.__doc__)
print(e.message)
finally:
self._end_measurement()
def _monitor_depo_bg(self):
"""
Main sputter deposition monitoring function, threaded version
Should only be called by main function start_depmon.
Records the film resistance, thickness and deposition rate live during the sputter process.
Stores everything into a h5 file.
Provides measures to estimate the resulting resistance of the final film and thereby
facilitates live adjustments to the sputter parameters.
Note:
set_duration and set_resolution should be called before to set the monitoring length and time resolution.
set_filmparameters should be called before to provide the actual target values.
"""
class StopPauseExeption(Exception):
pass
class StartPauseExeption(Exception):
pass
"""
A few boilerplate functions for the thread management:
continue, stop, status, etc...
"""
def stop():
raise StopIteration
def do_nothing():
pass
def status():
self._depmon_queue.put(loop_status)
def cont():
raise StopPauseExeption
def pause():
raise StartPauseExeption
loop_status = 0
tasks = {}
tasks[0] = stop
tasks[1] = do_nothing
tasks[2] = status
tasks[3] = pause
tasks[4] = cont
"""
Initialize the data lists.
"""
class MonData(object):
resistance = np.array([])
thickness = np.array([])
mon_data = MonData()
"""
Main loop:
"""
mon_data.it = 0
mon_data.t0 = time.time(
) # note: Windows has limitations on time precision (about 16ms)?
while True:
self._acquire(mon_data)
# Handle external commands
try:
tasks.get(self._depmon_queue.get(False), do_nothing)()
self._depmon_queue.task_done()
except Empty:
pass
except StartPauseExeption:
print('monitoring paused')
while True:
try:
time.sleep(0.1)
tasks.get(self._depmon_queue.get(False), do_nothing)()
self._depmon_queue.task_done()
except StopPauseExeption:
print('monitoring restarted')
break
except Empty:
pass
except StopPauseExeption:
pass
except StopIteration:
break
# calculate the time when the next iteration should take place
mon_data.it += 1
ti = mon_data.t0 + (float(mon_data.it)) * self._resolution
loop_status = ti # for now we simply return the runtime
# wait until the total dt(iteration) has elapsed
while time.time() < ti:
time.sleep(0.05)
self._end_measurement()
def start_depmon(self):
"""
Starts the main sputter deposition monitoring function background process (depmon).
Records the film resistance, thickness and deposition rate live during the sputter process.
Stores everything into a h5 file.
Provides measures to estimate the resulting resistance of the final film and thereby
facilitates live adjustments to the sputter parameters.
Note:
set_duration and set_resolution should be called before to set the monitoring length and time resolution.
set_filmparameters should be called before to provide the actual target values.
Hint:
Check with 'list_depmon_threads()'
Stop with 'stop_depmon()'
"""
print('Monitoring deposition...')
sys.stdout.flush()
self._init_depmon()
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(
self._data_file.get_filepath(),
datasets=['views/resistance_thickness'],
refresh=1.)
self._depmon = Thread(target=self._monitor_depo_bg, name="depmon-1")
self._depmon.daemon = True
self._depmon.start()
def stop_depmon(self):
"""
Stop the deposition monitoring thread.
Can be executed several times if more than one monitoring thread is running.
Hint:
Check with 'list_depmon_threads()'
"""
self._depmon_queue.put(0)
def status_depmon(self):
"""
Give a heartbeat of the deposition monitoring thread (in the moment just the runtime).
"""
self._depmon_queue.put(2)
print(self._depmon_queue.get())
self._depmon_queue.task_done()
def pause_depmon(self):
print('Pause Monitoring deposition...')
self._depmon_queue.put(3)
def continue_depmon(self):
print('Continue Monitoring deposition...')
self._depmon_queue.put(4)
def list_depmon_threads(self):
"""
List all bg deposition monitoring threads.
"""
for thread in threading.enumerate():
if thread.getName()[:3] == "dep":
print(thread)
def _end_measurement(self):
"""
The data file is closed and file path is printed.
"""
print(self._data_file.get_filepath())
# qviewkit.save_plots(self._data_file.get_filepath(),comment=self._plot_comment)
# #old version where we have to wait for the plots
t = threading.Thread(
target=qviewkit.save_plots,
args=[self._data_file.get_filepath(), self._plot_comment])
t.start()
self._data_file.close_file()
waf.close_log_file(self._log)
self.dirname = None
class spectrum(object):
'''
usage:
m = spectrum(vna = vna1)
m.set_x_parameters(arange(-0.05,0.05,0.01),'flux coil current',coil.set_current, unit = 'mA')
m.set_y_parameters(arange(4e9,7e9,10e6),'excitation frequency',mw_src1.set_frequency, unit = 'Hz')
m.gen_fit_function(...) several times
m.measure_XX()
'''
def __init__(self, vna, exp_name='', sample=None):
self.vna = vna
self.averaging_start_ready = "start_measurement" in self.vna.get_function_names(
) and "ready" in self.vna.get_function_names()
if not self.averaging_start_ready:
logging.warning(
__name__ + ': With your VNA instrument driver (' +
self.vna.get_type() +
'), I can not see when a measurement is complete. So I only wait for a specific time and hope the VNA has finished. Please consider implemeting the necessary functions into your driver.'
)
self.exp_name = exp_name
self._sample = sample
self.landscape = None
self.span = 200e6 #[Hz]
self.tdx = 0.002 #[s]
self.tdy = 0.002 #[s]
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = True
self._fit_resonator = False
self._plot_comment = ""
self.set_log_function()
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'spectroscopy'
self._measurement_object.sample = self._sample
self._qvk_process = False
self.number_of_timetraces = 1 #relevant in time domain mode
def set_log_function(self,
func=None,
name=None,
unit=None,
log_dtype=None):
'''
A function (object) can be passed to the measurement loop which is excecuted before every x iteration
but after executing the x_object setter in 2D measurements and before every line (but after setting
the x value) in 3D measurements.
The return value of the function of type float or similar is stored in a value vector in the h5 file.
Call without any arguments to delete all log functions. The timestamp is automatically saved.
func: function object in list form
name: name of logging parameter appearing in h5 file, default: 'log_param'
unit: unit of logging parameter, default: ''
log_dtype: h5 data type, default: 'f' (float32)
'''
if name == None:
try:
name = ['log_param'] * len(func)
except Exception:
name = None
if unit == None:
try:
unit = [''] * len(func)
except Exception:
unit = None
if log_dtype == None:
try:
log_dtype = ['f'] * len(func)
except Exception:
log_dtype = None
self.log_function = []
self.log_name = []
self.log_unit = []
self.log_dtype = []
if func != None:
for i, f in enumerate(func):
self.log_function.append(f)
self.log_name.append(name[i])
self.log_unit.append(unit[i])
self.log_dtype.append(log_dtype[i])
def set_x_parameters(self, x_vec, x_coordname, x_set_obj, x_unit=""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
x_vec (array): conains the sweeping values
x_coordname (string)
x_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
x_unit (string): optional
'''
self.x_vec = x_vec
self.x_coordname = x_coordname
self.x_set_obj = x_set_obj
self.delete_fit_function()
self.x_unit = x_unit
def set_y_parameters(self, y_vec, y_coordname, y_set_obj, y_unit=""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
y_vec (array): contains the sweeping values
y_coordname (string)
y_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
y_unit (string): optional
'''
self.y_vec = y_vec
self.y_coordname = y_coordname
self.y_set_obj = y_set_obj
self.delete_fit_function()
self.y_unit = y_unit
def gen_fit_function(self, curve_f, curve_p, units='', p0=[-1, 0.1, 7]):
'''
curve_f: 'parab', 'hyp', specifies the fit function to be employed
curve_p: set of points that are the basis for the fit in the format [[x1,x2,x3,...],[y1,y2,y3,...]], frequencies in Hz
units: set this to 'Hz' in order to avoid large values that cause the fit routine to diverge
p0 (optional): start parameters for the fit, must be an 1D array of length 3 ([a,b,c,d]),
where for the parabula p0[3] will be ignored
The parabolic function takes the form y = a*(x-b)**2 + c , where (a,b,c) = p0
The hyperbolic function takes the form y = sqrt[ a*(x-b)**2 + c ], where (a,b,c) = p0
adds a trace to landscape
'''
if not self.landscape:
self.landscape = []
x_fit = curve_p[0]
if units == 'Hz':
y_fit = np.array(curve_p[1]) * 1e-9
else:
y_fit = np.array(curve_p[1])
try:
multiplier = 1
if units == 'Hz':
multiplier = 1e9
fit_fct = None
if curve_f == 'parab':
fit_fct = self.f_parab
elif curve_f == 'hyp':
fit_fct = self.f_hyp
elif curve_f == 'lin':
fit_fct = self.f_lin
p0 = p0[:2]
else:
print 'function type not known...aborting'
raise ValueError
popt, pcov = curve_fit(fit_fct, x_fit, y_fit, p0=p0)
self.landscape.append(multiplier * fit_fct(self.x_vec, *popt))
except Exception as message:
print 'fit not successful:', message
popt = p0
def _prepare_measurement_vna(self):
'''
all the relevant settings from the vna are updated and called
'''
self.vna.get_all()
#ttip.get_temperature()
self._nop = self.vna.get_nop()
self._sweeptime_averages = self.vna.get_sweeptime_averages()
self._freqpoints = self.vna.get_freqpoints()
if self.averaging_start_ready: self.vna.pre_measurement()
def _prepare_measurement_file(self):
'''
creates the output .h5-file with distinct dataset structures for each measurement type.
at this point all measurement parameters are known and put in the output file
'''
self._data_file = hdf.Data(name=self._file_name)
self._measurement_object.uuid = self._data_file._uuid
self._measurement_object.hdf_relpath = self._data_file._relpath
self._measurement_object.instruments = qt.instruments.get_instruments()
self._measurement_object.save()
self._mo = self._data_file.add_textlist('measurement')
self._mo.append(self._measurement_object.get_JSON())
# write logfile and instrument settings
self._write_settings_dataset()
self._log = waf.open_log_file(self._data_file.get_filepath())
if not self._scan_time:
self._data_freq = self._data_file.add_coordinate('frequency',
unit='Hz')
self._data_freq.add(self._freqpoints)
if self._scan_1D:
self._data_real = self._data_file.add_value_vector(
'real', x=self._data_freq, unit='', save_timestamp=True)
self._data_imag = self._data_file.add_value_vector(
'imag', x=self._data_freq, unit='', save_timestamp=True)
self._data_amp = self._data_file.add_value_vector(
'amplitude',
x=self._data_freq,
unit='arb. unit',
save_timestamp=True)
self._data_pha = self._data_file.add_value_vector(
'phase', x=self._data_freq, unit='rad', save_timestamp=True)
if self._scan_2D:
self._data_x = self._data_file.add_coordinate(self.x_coordname,
unit=self.x_unit)
self._data_x.add(self.x_vec)
self._data_amp = self._data_file.add_value_matrix(
'amplitude',
x=self._data_x,
y=self._data_freq,
unit='arb. unit',
save_timestamp=True)
self._data_pha = self._data_file.add_value_matrix(
'phase',
x=self._data_x,
y=self._data_freq,
unit='rad',
save_timestamp=True)
if self.log_function != None: #use logging
self._log_value = []
for i in range(len(self.log_function)):
self._log_value.append(
self._data_file.add_value_vector(
self.log_name[i],
x=self._data_x,
unit=self.log_unit[i],
dtype=self.log_dtype[i]))
if self._nop < 10:
"""creates view: plot middle point vs x-parameter, for qubit measurements"""
self._data_amp_mid = self._data_file.add_value_vector(
'amplitude_midpoint',
unit='arb. unit',
x=self._data_x,
save_timestamp=True)
self._data_pha_mid = self._data_file.add_value_vector(
'phase_midpoint',
unit='rad',
x=self._data_x,
save_timestamp=True)
#self._view = self._data_file.add_view("amplitude vs. " + self.x_coordname, x = self._data_x, y = self._data_amp[self._nop/2])
if self._scan_3D:
self._data_x = self._data_file.add_coordinate(self.x_coordname,
unit=self.x_unit)
self._data_x.add(self.x_vec)
self._data_y = self._data_file.add_coordinate(self.y_coordname,
unit=self.y_unit)
self._data_y.add(self.y_vec)
if self._nop == 0: #saving in a 2D matrix instead of a 3D box HR: does not work yet !!! test things before you put them online.
self._data_amp = self._data_file.add_value_matrix(
'amplitude',
x=self._data_x,
y=self._data_y,
unit='arb. unit',
save_timestamp=False)
self._data_pha = self._data_file.add_value_matrix(
'phase',
x=self._data_x,
y=self._data_y,
unit='rad',
save_timestamp=False)
else:
self._data_amp = self._data_file.add_value_box(
'amplitude',
x=self._data_x,
y=self._data_y,
z=self._data_freq,
unit='arb. unit',
save_timestamp=False)
self._data_pha = self._data_file.add_value_box(
'phase',
x=self._data_x,
y=self._data_y,
z=self._data_freq,
unit='rad',
save_timestamp=False)
if self.log_function != None: #use logging
self._log_value = []
for i in range(len(self.log_function)):
self._log_value.append(
self._data_file.add_value_vector(
self.log_name[i],
x=self._data_x,
unit=self.log_unit[i],
dtype=self.log_dtype[i]))
if self._scan_time:
self._data_freq = self._data_file.add_coordinate('frequency',
unit='Hz')
self._data_freq.add([self.vna.get_centerfreq()])
self._data_time = self._data_file.add_coordinate('time', unit='s')
self._data_time.add(
np.arange(0, self._nop, 1) * self.vna.get_sweeptime() /
(self._nop - 1))
self._data_x = self._data_file.add_coordinate('trace_number',
unit='')
self._data_x.add(np.arange(0, self.number_of_timetraces, 1))
self._data_amp = self._data_file.add_value_matrix(
'amplitude',
x=self._data_x,
y=self._data_time,
unit='lin. mag.',
save_timestamp=False)
self._data_pha = self._data_file.add_value_matrix(
'phase',
x=self._data_x,
y=self._data_time,
unit='rad.',
save_timestamp=False)
if self.comment:
self._data_file.add_comment(self.comment)
if self.qviewkit_singleInstance and self.open_qviewkit and self._qvk_process:
self._qvk_process.terminate() #terminate an old qviewkit instance
def _write_settings_dataset(self):
self._settings = self._data_file.add_textlist('settings')
settings = waf.get_instrument_settings(self._data_file.get_filepath())
self._settings.append(settings)
def measure_1D(self, rescan=True, web_visible=True):
'''
measure method to record a single (averaged) VNA trace, S11 or S21 according to the setting on the VNA
rescan: If True (default), the averages on the VNA are cleared and a new measurement is started.
If False, it will directly take the data from the VNA without waiting.
'''
self._scan_1D = True
self._scan_2D = False
self._scan_3D = False
self._scan_time = False
self._measurement_object.measurement_func = 'measure_1D'
self._measurement_object.x_axis = 'frequency'
self._measurement_object.y_axis = ''
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = 'VNA_tracedata'
self._file_name = self.dirname.replace(' ', '').replace(',', '_')
if self.exp_name:
self._file_name += '_' + self.exp_name
self._prepare_measurement_vna()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(self._data_file.get_filepath(),
datasets=['amplitude', 'phase'])
if self._fit_resonator:
self._resonator = resonator(self._data_file.get_filepath())
print 'recording trace...'
sys.stdout.flush()
qt.mstart()
if rescan:
if self.averaging_start_ready:
self.vna.start_measurement()
ti = time()
if self.progress_bar:
self._p = Progress_Bar(self.vna.get_averages(),
self.dirname,
self.vna.get_sweeptime())
qt.msleep(.2)
while not self.vna.ready():
if time() - ti > self.vna.get_sweeptime(query=False):
if self.progress_bar: self._p.iterate()
ti = time()
qt.msleep(.2)
if self.progress_bar:
while self._p.progr < self._p.max_it:
self._p.iterate()
else:
self.vna.avg_clear()
if self.vna.get_averages() == 1 or self.vna.get_Average(
) == False: #no averaging
if self.progress_bar:
self._p = Progress_Bar(1, self.dirname,
self.vna.get_sweeptime())
qt.msleep(self.vna.get_sweeptime()) #wait single sweep
if self.progress_bar: self._p.iterate()
else: #with averaging
if self.progress_bar:
self._p = Progress_Bar(self.vna.get_averages(),
self.dirname,
self.vna.get_sweeptime())
if "avg_status" in self.vna.get_function_names():
for a in range(self.vna.get_averages()):
while self.vna.avg_status() <= a:
qt.msleep(
.2
) #maybe one would like to adjust this at a later point
if self.progress_bar: self._p.iterate()
else: #old style
for a in range(self.vna.get_averages()):
qt.msleep(self.vna.get_sweeptime()
) #wait single sweep time
if self.progress_bar: self._p.iterate()
data_amp, data_pha = self.vna.get_tracedata()
data_real, data_imag = self.vna.get_tracedata('RealImag')
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
self._data_real.append(data_real)
self._data_imag.append(data_imag)
if self._fit_resonator:
self._do_fit_resonator()
qt.mend()
self._end_measurement()
def measure_2D(self, web_visible=True):
'''
measure method to record a (averaged) VNA trace, S11 or S21 according to the setting on the VNA
for all parameters x_vec in x_obj
'''
if not self.x_set_obj:
logging.error('axes parameters not properly set...aborting')
return
self._scan_1D = False
self._scan_2D = True
self._scan_3D = False
self._scan_time = False
self._measurement_object.measurement_func = 'measure_2D'
self._measurement_object.x_axis = self.x_coordname
self._measurement_object.y_axis = 'frequency'
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = self.x_coordname
self._file_name = '2D_' + self.dirname.replace(' ', '').replace(
',', '_')
if self.exp_name:
self._file_name += '_' + self.exp_name
if self.progress_bar:
self._p = Progress_Bar(len(self.x_vec),
'2D VNA sweep ' + self.dirname,
self.vna.get_sweeptime_averages())
self._prepare_measurement_vna()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
if self._nop < 10:
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(
self._data_file.get_filepath(),
datasets=['amplitude_midpoint', 'phase_midpoint'])
else:
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(
self._data_file.get_filepath(),
datasets=['amplitude', 'phase'])
if self._fit_resonator:
self._resonator = resonator(self._data_file.get_filepath())
self._measure()
def measure_3D(self, web_visible=True):
'''
measure full window of vna while sweeping x_set_obj and y_set_obj with parameters x_vec/y_vec. sweep over y_set_obj is the inner loop, for every value x_vec[i] all values y_vec are measured.
optional: measure method to perform the measurement according to landscape, if set
self.span is the range (in units of the vertical plot axis) data is taken around the specified funtion(s)
note: make sure to have properly set x,y vectors before generating traces
'''
if not self.x_set_obj or not self.y_set_obj:
logging.error('axes parameters not properly set...aborting')
return
self._scan_1D = False
self._scan_2D = False
self._scan_3D = True
self._scan_time = False
self._measurement_object.measurement_func = 'measure_3D'
self._measurement_object.x_axis = self.x_coordname
self._measurement_object.y_axis = self.y_coordname
self._measurement_object.z_axis = 'frequency'
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = self.x_coordname + ', ' + self.y_coordname
self._file_name = '3D_' + self.dirname.replace(' ', '').replace(
',', '_')
if self.exp_name:
self._file_name += '_' + self.exp_name
if self.progress_bar:
self._p = Progress_Bar(
len(self.x_vec) * len(self.y_vec),
'3D VNA sweep ' + self.dirname,
self.vna.get_sweeptime_averages())
self._prepare_measurement_vna()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
"""only middle point in freq array is plotted vs x and y"""
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(self._data_file.get_filepath(),
datasets=['amplitude', 'phase'])
if self._fit_resonator:
self._resonator = resonator(self._data_file.get_filepath())
if self.landscape:
self.center_freqs = np.array(self.landscape).T
else:
self.center_freqs = [] #load default sequence
for i in range(len(self.x_vec)):
self.center_freqs.append([0])
self._measure()
def measure_timetrace(self, web_visible=True):
'''
measure method to record a single VNA timetrace, this only makes sense when span is set to 0 Hz!,
tested only with KEYSIGHT E5071C ENA and its corresponding qkit driver
LGruenhaupt 11/2016
'''
if self.vna.get_span() > 0:
print 'VNA span not set to 0 Hz... aborting'
return
self._scan_1D = False
self._scan_2D = False
self._scan_3D = False
self._scan_time = True
self._measurement_object.measurement_func = 'measure_timetrace'
self._measurement_object.x_axis = 'time'
self._measurement_object.y_axis = ''
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = 'VNA_timetrace'
self._file_name = self.dirname.replace(' ', '').replace(',', '_')
if self.exp_name:
self._file_name += '_' + self.exp_name
self.x_vec = np.arange(0, self.number_of_timetraces, 1)
self._prepare_measurement_vna()
self._prepare_measurement_file()
if self.progress_bar:
self._p = Progress_Bar(self.number_of_timetraces,
'VNA timetrace ' + self.dirname,
self.vna.get_sweeptime_averages())
print 'recording timetrace(s)...'
sys.stdout.flush()
qt.mstart()
try:
"""
loop: x_obj with parameters from x_vec
"""
for i, x in enumerate(self.x_vec):
if self.log_function != None:
for i, f in enumerate(self.log_function):
self._log_value[i].append(float(f()))
if self.averaging_start_ready: #LG 11/2016
self.vna.start_measurement()
ti = time(
) #changed from time.time() to time() - LGruenhaupt OCT_2016
tp = time() #added to enable use of progress bar
#self._p = Progress_Bar(self.vna.get_averages(),self.dirname,self.vna.get_sweeptime_averages()) moved to line 303
''' This is to prevent the vna.ready() function from timing out. LG NOV/16 '''
if self.vna.get_Average():
print 'this function only makes sense without averaging'
qt.mend()
self._end_measuremt()
else:
#self._p = Progress_Bar(1,self.dirname,self.vna.get_sweeptime())
qt.msleep(self.vna.get_sweeptime())
#self._p.iterate()
while not self.vna.ready():
qt.msleep(
.2
) #this is just to check if the measurement has finished
data_amp, data_pha = self.vna.get_tracedata()
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
qt.msleep()
if self.progress_bar:
self._p.iterate()
else:
print 'not implemented for this VNA, only works with Keysight ENA 5071C'
qt.mend()
self._end_measurement()
except Exception as e:
print e.__doc__
print e.message
finally:
self._end_measurement()
qt.mend()
def _measure(self):
'''
measures and plots the data depending on the measurement type.
the measurement loops feature the setting of the objects and saving the data in the .h5 file.
'''
qt.mstart()
try:
"""
loop: x_obj with parameters from x_vec
"""
for ix, x in enumerate(self.x_vec):
self.x_set_obj(x)
sleep(self.tdx)
if self.log_function != None:
for i, f in enumerate(self.log_function):
self._log_value[i].append(float(f()))
if self._scan_3D:
for y in self.y_vec:
"""
loop: y_obj with parameters from y_vec (only 3D measurement)
"""
if (
np.min(
np.abs(self.center_freqs[ix] - y *
np.ones(len(self.center_freqs[ix])))
) > self.span / 2.
) and self.landscape: #if point is not of interest (not close to one of the functions)
data_amp = np.zeros(int(self._nop))
data_pha = np.zeros(int(
self._nop)) #fill with zeros
else:
self.y_set_obj(y)
sleep(self.tdy)
if self.averaging_start_ready:
self.vna.start_measurement()
qt.msleep(
.2
) #just to make sure, the ready command does not *still* show ready
while not self.vna.ready():
qt.msleep(.2)
else:
self.vna.avg_clear()
qt.msleep(self._sweeptime_averages)
#if "avg_status" in self.vna.get_function_names():
# while self.vna.avg_status() < self.vna.get_averages():
# qt.msleep(.2) #maybe one would like to adjust this at a later point
""" measurement """
data_amp, data_pha = self.vna.get_tracedata()
if self._nop == 0: # this does not work yet.
print data_amp[0], data_amp, self._nop
self._data_amp.append(data_amp[0])
self._data_pha.append(data_pha[0])
else:
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
if self._fit_resonator:
self._do_fit_resonator()
if self.progress_bar:
self._p.iterate()
qt.msleep()
"""
filling of value-box is done here.
after every y-loop the data is stored the next 2d structure
"""
self._data_amp.next_matrix()
self._data_pha.next_matrix()
if self._scan_2D:
if self.averaging_start_ready:
self.vna.start_measurement()
qt.msleep(
.2
) #just to make sure, the ready command does not *still* show ready
while not self.vna.ready():
qt.msleep(.2)
else:
self.vna.avg_clear()
qt.msleep(self._sweeptime_averages)
""" measurement """
data_amp, data_pha = self.vna.get_tracedata()
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
if self._nop < 10:
#print data_amp[self._nop/2]
self._data_amp_mid.append(
float(data_amp[self._nop / 2]))
self._data_pha_mid.append(
float(data_pha[self._nop / 2]))
if self._fit_resonator:
self._do_fit_resonator()
if self.progress_bar:
self._p.iterate()
qt.msleep()
except Exception as e:
print e.__doc__
print e.message
finally:
self._end_measurement()
qt.mend()
def _end_measurement(self):
'''
the data file is closed and filepath is printed
'''
print self._data_file.get_filepath()
#qviewkit.save_plots(self._data_file.get_filepath(),comment=self._plot_comment) #old version where we have to wait for the plots
t = threading.Thread(
target=qviewkit.save_plots,
args=[self._data_file.get_filepath(), self._plot_comment])
t.start()
self._data_file.close_file()
waf.close_log_file(self._log)
self.dirname = None
if self.averaging_start_ready: self.vna.post_measurement()
def set_resonator_fit(self,
fit_resonator=True,
fit_function='',
f_min=None,
f_max=None):
'''
sets fit parameter for resonator
fit_resonator (bool): True or False, default: True (optional)
fit_function (string): function which will be fitted to the data (optional)
f_min (float): lower frequency boundary for the fitting function, default: None (optional)
f_max (float): upper frequency boundary for the fitting function, default: None (optional)
fit types: 'lorentzian','skewed_lorentzian','circle_fit_reflection', 'circle_fit_notch','fano'
'''
if not fit_resonator:
self._fit_resonator = False
return
self._functions = {
'lorentzian': 0,
'skewed_lorentzian': 1,
'circle_fit_reflection': 2,
'circle_fit_notch': 3,
'fano': 5,
'all_fits': 5
}
try:
self._fit_function = self._functions[fit_function]
except KeyError:
logging.error(
'Fit function not properly set. Must be either \'lorentzian\', \'skewed_lorentzian\', \'circle_fit_reflection\', \'circle_fit_notch\', \'fano\', or \'all_fits\'.'
)
else:
self._fit_resonator = True
self._f_min = f_min
self._f_max = f_max
def _do_fit_resonator(self):
'''
calls fit function in resonator class
fit function is specified in self.set_fit, with boundaries f_mim and f_max
only the last 'slice' of data is fitted, since we fit live while measuring.
'''
if self._fit_function == 0: #lorentzian
self._resonator.fit_lorentzian(f_min=self._f_min,
f_max=self._f_max)
if self._fit_function == 1: #skewed_lorentzian
self._resonator.fit_skewed_lorentzian(f_min=self._f_min,
f_max=self._f_max)
if self._fit_function == 2: #circle_reflection
self._resonator.fit_circle(reflection=True,
f_min=self._f_min,
f_max=self._f_max)
if self._fit_function == 3: #circle_notch
self._resonator.fit_circle(notch=True,
f_min=self._f_min,
f_max=self._f_max)
if self._fit_function == 4: #fano
self._resonator.fit_fano(f_min=self._f_min, f_max=self._f_max)
#if self._fit_function == 5: #all fits
#self._resonator.fit_all_fits(f_min=self._f_min, f_max = self._f_max)
def delete_fit_function(self, n=None):
'''
delete single fit function n (with 0 being the first one generated) or the complete landscape for n not specified
'''
if n:
self.landscape = np.delete(self.landscape, n, axis=0)
else:
self.landscape = None
def plot_fit_function(self, num_points=100):
'''
try:
x_coords = np.linspace(self.x_vec[0], self.x_vec[-1], num_points)
except Exception as message:
print 'no x axis information specified', message
return
'''
if self.landscape:
for trace in self.landscape:
try:
#plt.clear()
plt.plot(self.x_vec, trace)
plt.fill_between(self.x_vec,
trace + float(self.span) / 2,
trace - float(self.span) / 2,
alpha=0.5)
except Exception:
print 'invalid trace...skip'
plt.axhspan(self.y_vec[0],
self.y_vec[-1],
facecolor='0.5',
alpha=0.5)
plt.show()
else:
print 'No trace generated.'
def set_span(self, span):
self.span = span
def get_span(self):
return self.span
def set_tdx(self, tdx):
self.tdx = tdx
def set_tdy(self, tdy):
self.tdy = tdy
def get_tdx(self):
return self.tdx
def get_tdy(self):
return self.tdy
def f_parab(self, x, a, b, c):
return a * (x - b)**2 + c
def f_hyp(self, x, a, b, c):
"hyperbolic function with the form y = sqrt[ a*(x-b)**2 + c ]"
return np.sqrt(a * (x - b)**2 + c)
def f_lin(self, x, a, b):
return a * x + b
def set_plot_comment(self, comment):
'''
Small comment to add at the end of plot pics for more information i.e. good for wiki entries.
'''
self._plot_comment = comment
class spectrum(object):
"""
usage: similar to the old spectroscopy file.However class generates hdf vectors/matrices depending on the number
of traces of your signal_analyzer.
m = spectrum(sig_analyzer = specki)
m.set_x_parameters(arange(-0.05,0.05,0.01),'flux coil current',coil.set_current, unit = 'mA')
m.set_y_parameters(arange(4e9,7e9,10e6),'excitation frequency',mw_src1.set_frequency, unit = 'Hz')
m.gen_fit_function(...) several times
m.measure_XX()
functions that must be additionally implemented in your signal analyzer's driver
get_y_unit(trace) - returns y-unit of your trace
get_active_traces() - returns number of traces
get_trace_name(trace) - returns name of your trace
"""
def __init__(self, sig_analyzer, exp_name='', sample=None):
self.sig_analyzer = sig_analyzer
self.averaging_start_ready = "start_measurement" in self.sig_analyzer.get_function_names() \
and "ready" in self.sig_analyzer.get_function_names()
if not self.averaging_start_ready:
logging.warning(
__name__ + ': With your signal analyzer driver (' +
self.sig_analyzer.get_type() + '),'
' I can not see when a measurement is complete. '
'So I only wait for a specific time and hope the VNA has finished. '
'Please consider implemeting the necessary functions into your driver.'
)
self.exp_name = exp_name
self._sample = sample
self.landscape = None
self.span = 200e6 # [Hz]
self.tdx = 0.002 # [s]
self.tdy = 0.002 # [s]
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = True
self._plot_comment = ""
self.set_log_function()
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'spectroscopy'
self._measurement_object.sample = self._sample
self._qvk_process = False
def set_log_function(self,
func=None,
name=None,
unit=None,
log_dtype=None):
'''
A function (object) can be passed to the measurement loop which is excecuted before every x iteration
but after executing the x_object setter in 2D measurements and before every line (but after setting
the x value) in 3D measurements.
The return value of the function of type float or similar is stored in a value vector in the h5 file.
Call without any arguments to delete all log functions. The timestamp is automatically saved.
func: function object in list form
name: name of logging parameter appearing in h5 file, default: 'log_param'
unit: unit of logging parameter, default: ''
log_dtype: h5 data type, default: 'f' (float32)
'''
if name == None:
try:
name = ['log_param'] * len(func)
except Exception:
name = None
if unit == None:
try:
unit = [''] * len(func)
except Exception:
unit = None
if log_dtype == None:
try:
log_dtype = ['f'] * len(func)
except Exception:
log_dtype = None
self.log_function = []
self.log_name = []
self.log_unit = []
self.log_dtype = []
if func != None:
for i, f in enumerate(func):
self.log_function.append(f)
self.log_name.append(name[i])
self.log_unit.append(unit[i])
self.log_dtype.append(log_dtype[i])
def set_x_parameters(self, x_vec, x_coordname, x_set_obj, x_unit=""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
x_vec (array): conains the sweeping values
x_coordname (string)
x_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
x_unit (string): optional
'''
self.x_vec = x_vec
self.x_coordname = x_coordname
self.x_set_obj = x_set_obj
self.delete_fit_function()
self.x_unit = x_unit
def set_y_parameters(self, y_vec, y_coordname, y_set_obj, y_unit=""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
y_vec (array): contains the sweeping values
y_coordname (string)
y_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
y_unit (string): optional
'''
self.y_vec = y_vec
self.y_coordname = y_coordname
self.y_set_obj = y_set_obj
self.delete_fit_function()
self.y_unit = y_unit
def gen_fit_function(self, curve_f, curve_p, units='', p0=[-1, 0.1, 7]):
'''
curve_f: 'parab', 'hyp', specifies the fit function to be employed
curve_p: set of points that are the basis for the fit in the format [[x1,x2,x3,...],[y1,y2,y3,...]], frequencies in Hz
units: set this to 'Hz' in order to avoid large values that cause the fit routine to diverge
p0 (optional): start parameters for the fit, must be an 1D array of length 3 ([a,b,c,d]),
where for the parabula p0[3] will be ignored
The parabolic function takes the form y = a*(x-b)**2 + c , where (a,b,c) = p0
The hyperbolic function takes the form y = sqrt[ a*(x-b)**2 + c ], where (a,b,c) = p0
adds a trace to landscape
'''
if not qkit.module_available("scipy"):
raise ImportError('scipy not available.')
if not self.landscape:
self.landscape = []
x_fit = curve_p[0]
if units == 'Hz':
y_fit = np.array(curve_p[1]) * 1e-9
else:
y_fit = np.array(curve_p[1])
try:
multiplier = 1
if units == 'Hz':
multiplier = 1e9
fit_fct = None
if curve_f == 'parab':
fit_fct = self.f_parab
elif curve_f == 'hyp':
fit_fct = self.f_hyp
elif curve_f == 'lin':
fit_fct = self.f_lin
p0 = p0[:2]
else:
print('function type not known...aborting')
raise ValueError
popt, pcov = curve_fit(fit_fct, x_fit, y_fit, p0=p0)
self.landscape.append(multiplier * fit_fct(self.x_vec, *popt))
except Exception as message:
print('fit not successful:', message)
popt = p0
def _prepare_measurement_sig_analyzer(self):
'''
all the relevant settings from the vna are updated and called
'''
self.sig_analyzer.get_all()
# ttip.get_temperature()
self._nop = self.sig_analyzer.get_nop()
self._sweeptime_averages = self.sig_analyzer.get_sweeptime_averages()
self._freqpoints = self.sig_analyzer.get_freqpoints()
self.num_traces = self.sig_analyzer.get_active_traces()
self.traces_names = []
self.units = []
for i in range(self.num_traces):
self.traces_names.append(self.sig_analyzer.get_trace_name(
i + 1)) # must be implemented in driver
self.units.append(
self.sig_analyzer.get_y_unit(i +
1)) # must also be impelmented
if self.averaging_start_ready:
self.sig_analyzer.pre_measurement()
def _prepare_measurement_file(self):
'''
creates the output .h5-file with distinct dataset structures for each measurement type.
at this point all measurement parameters are known and put in the output file
'''
self._data_file = hdf.Data(name=self._file_name, mode='a')
self._measurement_object.uuid = self._data_file._uuid
self._measurement_object.hdf_relpath = self._data_file._relpath
self._measurement_object.instruments = qkit.instruments.get_instrument_names(
)
self._measurement_object.save()
self._mo = self._data_file.add_textlist('measurement')
self._mo.append(self._measurement_object.get_JSON())
# write logfile and instrument settings
self._write_settings_dataset()
self._log = waf.open_log_file(self._data_file.get_filepath())
self._data_freq = self._data_file.add_coordinate('frequency',
unit='Hz')
self._data_freq.add(self._freqpoints)
self._data = [] # empty list as we have a variable number of channels
if self._scan_1D:
for i in range(self.num_traces):
self._data.append(
self._data_file.add_value_vector(self.traces_names[i],
x=self._data_freq,
unit=self.units[i],
save_timestamp=True))
if self._scan_2D:
self._data_x = self._data_file.add_coordinate(self.x_coordname,
unit=self.x_unit)
self._data_x.add(self.x_vec)
for i in range(self.num_traces):
self._data.append(
self._data_file.add_value_matrix(self.traces_names[i],
x=self._data_x,
y=self._data_freq,
unit=self.units[i],
save_timestamp=True))
if self.log_function != None: # use logging
self._log_value = []
for i in range(len(self.log_function)):
self._log_value.append(
self._data_file.add_value_vector(
self.log_name[i],
x=self._data_x,
unit=self.log_unit[i],
dtype=self.log_dtype[i]))
if self._scan_3D:
self._data_x = self._data_file.add_coordinate(self.x_coordname,
unit=self.x_unit)
self._data_x.add(self.x_vec)
self._data_y = self._data_file.add_coordinate(self.y_coordname,
unit=self.y_unit)
self._data_y.add(self.y_vec)
for i in range(self.num_traces):
self._data.append(
self._data_file.add_value_box(self.traces_names[i],
x=self._data_x,
y=self.data_y,
z=self._data_freq,
unit=self.units[i],
save_timestamp=True))
if self.log_function != None: # use logging
self._log_value = []
for i in range(len(self.log_function)):
self._log_value.append(
self._data_file.add_value_vector(
self.log_name[i],
x=self._data_x,
unit=self.log_unit[i],
dtype=self.log_dtype[i]))
if self.comment:
self._data_file.add_comment(self.comment)
if self.qviewkit_singleInstance and self.open_qviewkit and self._qvk_process:
self._qvk_process.terminate() # terminate an old qviewkit instance
def _write_settings_dataset(self):
self._settings = self._data_file.add_textlist('settings')
settings = waf.get_instrument_settings(self._data_file.get_filepath())
self._settings.append(settings)
def measure_1D(self, rescan=True, web_visible=True):
'''
measure method to record a single (averaged) VNA trace, S11 or S21 according to the setting on the VNA
rescan: If True (default), the averages on the VNA are cleared and a new measurement is started.
If False, it will directly take the data from the VNA without waiting.
'''
self._scan_1D = True
self._scan_2D = False
self._scan_3D = False
self._scan_time = False
self._measurement_object.measurement_func = 'measure_1D'
self._measurement_object.x_axis = 'frequency'
self._measurement_object.y_axis = ''
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = 'signal_analyzer_tracedata'
self._file_name = self.dirname.replace(' ', '').replace(',', '_')
if self.exp_name:
self._file_name += '_' + self.exp_name
self._prepare_measurement_sig_analyzer()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(self._data_file.get_filepath(),
datasets=self.traces_names)
print('recording trace...')
sys.stdout.flush()
qkit.flow.start()
if rescan:
if self.averaging_start_ready:
self.sig_analyzer.start_measurement()
ti = time()
if self.progress_bar:
self._p = Progress_Bar(self.sig_analyzer.get_averages(),
self.dirname,
self.sig_analyzer.get_sweeptime())
qkit.flow.sleep(.2)
while not self.sig_analyzer.ready():
if time() - ti > self.sig_analyzer.get_sweeptime(
query=False):
if self.progress_bar: self._p.iterate()
ti = time()
qkit.flow.sleep(.2)
if self.progress_bar:
while self._p.progr < self._p.max_it:
self._p.iterate()
else: # not tested!!!!!!
self.sig_analyzer.avg_clear()
if self.sig_analyzer.get_averages(
) == 1 or self.sig_analyzer.get_Average(
) == False: # no averaging
if self.progress_bar:
self._p = Progress_Bar(
1, self.dirname, self.sig_analyzer.get_sweeptime())
qkit.flow.sleep(
self.sig_analyzer.get_sweeptime()) # wait single sweep
if self.progress_bar: self._p.iterate()
else: # with averaging
if self.progress_bar:
self._p = Progress_Bar(
self.sig_analyzer.get_averages(), self.dirname,
self.sig_analyzer.get_sweeptime())
if "avg_status" in self.sig_analyzer.get_function_names():
for a in range(self.sig_analyzer.get_averages()):
while self.sig_analyzer.avg_status() <= a:
qkit.flow.sleep(
.2
) # maybe one would like to adjust this at a later point
if self.progress_bar: self._p.iterate()
else: # old style
for a in range(self.sig_analyzer.get_averages()):
qkit.flow.sleep(self.sig_analyzer.get_sweeptime()
) # wait single sweep time
if self.progress_bar: self._p.iterate()
for i in range(self.num_traces):
self._data[i].append(self.sig_analyzer.get_tracedata(i + 1))
qkit.flow.end()
self._end_measurement()
def measure_2D(self, web_visible=True):
'''
measure method to record a (averaged) VNA trace, S11 or S21 according to the setting on the VNA
for all parameters x_vec in x_obj
'''
if not self.x_set_obj:
logging.error('axes parameters not properly set...aborting')
return
self._scan_1D = False
self._scan_2D = True
self._scan_3D = False
self._scan_time = False
self._measurement_object.measurement_func = 'measure_2D'
self._measurement_object.x_axis = self.x_coordname
self._measurement_object.y_axis = 'frequency'
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = self.x_coordname
self._file_name = '2D_' + self.dirname.replace(' ', '').replace(
',', '_')
if self.exp_name:
self._file_name += '_' + self.exp_name
if self.progress_bar:
self._p = Progress_Bar(len(self.x_vec),
'2D signal analyzer sweep ' + self.dirname,
self.sig_analyzer.get_sweeptime_averages())
self._prepare_measurement_sig_analyzer()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(self._data_file.get_filepath(),
datasets=self.traces_names)
self._measure()
def measure_3D(self, web_visible=True):
'''
measure full window of vna while sweeping x_set_obj and y_set_obj with parameters x_vec/y_vec.
sweep over y_set_obj is the inner loop, for every value x_vec[i] all values y_vec are measured.
optional: measure method to perform the measurement according to landscape, if set
self.span is the range (in units of the vertical plot axis) data is taken around the specified funtion(s)
note: make sure to have properly set x,y vectors before generating traces
'''
if not self.x_set_obj or not self.y_set_obj:
logging.error('axes parameters not properly set...aborting')
return
self._scan_1D = False
self._scan_2D = False
self._scan_3D = True
self._scan_time = False
self._measurement_object.measurement_func = 'measure_3D'
self._measurement_object.x_axis = self.x_coordname
self._measurement_object.y_axis = self.y_coordname
self._measurement_object.z_axis = 'frequency'
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = self.x_coordname + ', ' + self.y_coordname
self._file_name = '3D_' + self.dirname.replace(' ', '').replace(
',', '_')
if self.exp_name:
self._file_name += '_' + self.exp_name
if self.progress_bar:
self._p = Progress_Bar(
len(self.x_vec) * len(self.y_vec),
'3D signal analyzer sweep ' + self.dirname,
self.sig_analyzer.get_sweeptime_averages())
self._prepare_measurement_sig_analyzer()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
"""only middle point in freq array is plotted vs x and y"""
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(self._data_file.get_filepath(),
datasets=self.traces_names)
### ???
if self.landscape:
self.center_freqs = np.array(self.landscape).T
else:
self.center_freqs = [] # load default sequence
for i in range(len(self.x_vec)):
self.center_freqs.append([0])
self._measure()
def _measure(self):
'''
measures and plots the data depending on the measurement type.
the measurement loops feature the setting of the objects and saving the data in the .h5 file.
'''
qkit.flow.start()
try:
"""
loop: x_obj with parameters from x_vec
"""
for ix, x in enumerate(self.x_vec):
self.x_set_obj(x)
sleep(self.tdx)
if self.log_function != None:
for i, f in enumerate(self.log_function):
self._log_value[i].append(float(f()))
#### not tested
if self._scan_3D:
for y in self.y_vec:
"""
loop: y_obj with parameters from y_vec (only 3D measurement)
"""
if (
np.min(
np.abs(self.center_freqs[ix] - y *
np.ones(len(self.center_freqs[ix])))
) > self.span / 2.
) and self.landscape: # if point is not of interest (not close to one of the functions)
data = []
for i in range(self.num_traces):
data.append(np.zeros(int(self._nop)))
else:
self.y_set_obj(y)
sleep(self.tdy)
if self.averaging_start_ready:
self.sig_analyzer.start_measurement()
qkit.flow.sleep(
.2
) # just to make sure, the ready command does not *still* show ready
while not self.sig_analyzer.ready():
qkit.flow.sleep(.2)
else:
self.sig_analyzer.avg_clear()
qkit.flow.sleep(self._sweeptime_averages)
# if "avg_status" in self.sig_analyzer.get_function_names():
# while self.sig_analyzer.avg_status() < self.sig_analyzer.get_averages():
# qkit.flow.sleep(.2) #maybe one would like to adjust this at a later point
""" measurement """
for i in range(self.num_traces):
data[i] = self.sig_analyzer.get_tracedata(i +
1)
self._data[i].append(data[i])
if self.progress_bar:
self._p.iterate()
qkit.flow.sleep()
"""
filling of value-box is done here.
after every y-loop the data is stored the next 2d structure
"""
for i in range(self.num_traces):
self._data[i].next_matrix()
if self._scan_2D:
if self.averaging_start_ready:
self.sig_analyzer.start_measurement()
qkit.flow.sleep(
.2
) # just to make sure, the ready command does not *still* show ready
while not self.sig_analyzer.ready():
qkit.flow.sleep(.2)
else:
self.sig_analyzer.avg_clear()
qkit.flow.sleep(self._sweeptime_averages)
""" measurement """
for i in range(self.num_traces):
self._data[i].append(
self.sig_analyzer.get_tracedata(i + 1))
if self.progress_bar:
self._p.iterate()
qkit.flow.sleep()
finally:
self._end_measurement()
qkit.flow.end()
def _end_measurement(self):
'''
the data file is closed and filepath is printed
'''
print(self._data_file.get_filepath())
# qviewkit.save_plots(self._data_file.get_filepath(),comment=self._plot_comment) #old version where we have to wait for the plots
t = threading.Thread(
target=qviewkit.save_plots,
args=[self._data_file.get_filepath(), self._plot_comment])
t.start()
self._data_file.close_file()
waf.close_log_file(self._log)
self.dirname = None
if self.averaging_start_ready: self.sig_analyzer.post_measurement()
def delete_fit_function(self, n=None):
'''
delete single fit function n (with 0 being the first one generated) or the complete landscape for n not specified
'''
if n:
self.landscape = np.delete(self.landscape, n, axis=0)
else:
self.landscape = None
def plot_fit_function(self, num_points=100):
'''
try:
x_coords = np.linspace(self.x_vec[0], self.x_vec[-1], num_points)
except Exception as message:
print 'no x axis information specified', message
return
'''
if not qkit.module_available("matplotlib"):
raise ImportError("matplotlib not found.")
if self.landscape:
for trace in self.landscape:
try:
# plt.clear()
plt.plot(self.x_vec, trace)
plt.fill_between(self.x_vec,
trace + float(self.span) / 2,
trace - float(self.span) / 2,
alpha=0.5)
except Exception:
print('invalid trace...skip')
plt.axhspan(self.y_vec[0],
self.y_vec[-1],
facecolor='0.5',
alpha=0.5)
plt.show()
else:
print('No trace generated.')
def set_span(self, span):
self.span = span
def get_span(self):
return self.span
def set_tdx(self, tdx):
self.tdx = tdx
def set_tdy(self, tdy):
self.tdy = tdy
def get_tdx(self):
return self.tdx
def get_tdy(self):
return self.tdy
def f_parab(self, x, a, b, c):
return a * (x - b)**2 + c
def f_hyp(self, x, a, b, c):
"hyperbolic function with the form y = sqrt[ a*(x-b)**2 + c ]"
return np.sqrt(a * (x - b)**2 + c)
def f_lin(self, x, a, b):
return a * x + b
def set_plot_comment(self, comment):
'''
Small comment to add at the end of plot pics for more information i.e. good for wiki entries.
'''
self._plot_comment = comment
class spectrum(object):
'''
usage:
m = spectrum(vna = vna1)
m.set_x_parameters(arange(-0.05,0.05,0.01),'flux coil current',coil.set_current, unit = 'mA')
m.set_y_parameters(arange(4e9,7e9,10e6),'excitation frequency',mw_src1.set_frequency, unit = 'Hz')
m.gen_fit_function(...) several times
m.measure_XX()
'''
def __init__(self, vna, exp_name = '', sample = None):
self.vna = vna
self.averaging_start_ready = "start_measurement" in self.vna.get_function_names() and "ready" in self.vna.get_function_names()
if not self.averaging_start_ready: logging.warning(__name__ + ': With your VNA instrument driver (' + self.vna.get_type() + '), I can not see when a measurement is complete. So I only wait for a specific time and hope the VNA has finished. Please consider implemeting the necessary functions into your driver.')
self.exp_name = exp_name
self._sample = sample
self.landscape = None
self.span = 200e6 #[Hz]
self.tdx = 0.002 #[s]
self.tdy = 0.002 #[s]
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = True
self._fit_resonator = False
self._plot_comment=""
self.set_log_function()
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'spectroscopy'
self._measurement_object.sample = self._sample
self._qvk_process = False
self.number_of_timetraces = 1 #relevant in time domain mode
def set_log_function(self, func=None, name = None, unit = None, log_dtype = None):
'''
A function (object) can be passed to the measurement loop which is excecuted before every x iteration
but after executing the x_object setter in 2D measurements and before every line (but after setting
the x value) in 3D measurements.
The return value of the function of type float or similar is stored in a value vector in the h5 file.
Call without any arguments to delete all log functions. The timestamp is automatically saved.
func: function object in list form
name: name of logging parameter appearing in h5 file, default: 'log_param'
unit: unit of logging parameter, default: ''
log_dtype: h5 data type, default: 'f' (float32)
'''
if name == None:
try:
name = ['log_param']*len(func)
except Exception:
name = None
if unit == None:
try:
unit = ['']*len(func)
except Exception:
unit = None
if log_dtype == None:
try:
log_dtype = ['f']*len(func)
except Exception:
log_dtype = None
self.log_function = []
self.log_name = []
self.log_unit = []
self.log_dtype = []
if func != None:
for i,f in enumerate(func):
self.log_function.append(f)
self.log_name.append(name[i])
self.log_unit.append(unit[i])
self.log_dtype.append(log_dtype[i])
def set_x_parameters(self, x_vec, x_coordname, x_set_obj, x_unit = ""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
x_vec (array): conains the sweeping values
x_coordname (string)
x_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
x_unit (string): optional
'''
self.x_vec = x_vec
self.x_coordname = x_coordname
self.x_set_obj = x_set_obj
self.delete_fit_function()
self.x_unit = x_unit
def set_y_parameters(self, y_vec, y_coordname, y_set_obj, y_unit = ""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
y_vec (array): contains the sweeping values
y_coordname (string)
y_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
y_unit (string): optional
'''
self.y_vec = y_vec
self.y_coordname = y_coordname
self.y_set_obj = y_set_obj
self.delete_fit_function()
self.y_unit = y_unit
def gen_fit_function(self, curve_f, curve_p, units = '', p0 = [-1,0.1,7]):
'''
curve_f: 'parab', 'hyp', specifies the fit function to be employed
curve_p: set of points that are the basis for the fit in the format [[x1,x2,x3,...],[y1,y2,y3,...]], frequencies in Hz
units: set this to 'Hz' in order to avoid large values that cause the fit routine to diverge
p0 (optional): start parameters for the fit, must be an 1D array of length 3 ([a,b,c,d]),
where for the parabula p0[3] will be ignored
The parabolic function takes the form y = a*(x-b)**2 + c , where (a,b,c) = p0
The hyperbolic function takes the form y = sqrt[ a*(x-b)**2 + c ], where (a,b,c) = p0
adds a trace to landscape
'''
if not self.landscape:
self.landscape = []
x_fit = curve_p[0]
if units == 'Hz':
y_fit = np.array(curve_p[1])*1e-9
else:
y_fit = np.array(curve_p[1])
try:
if curve_f == 'parab':
"remove the last item"
#p0.pop()
popt, pcov = curve_fit(self.f_parab, x_fit, y_fit, p0=p0)
if units == 'Hz':
self.landscape.append(1e9*self.f_parab(self.x_vec, *popt))
else:
self.landscape.append(self.f_parab(self.x_vec, *popt))
elif curve_f == 'hyp':
popt, pcov = curve_fit(self.f_hyp, x_fit, y_fit, p0=p0)
print popt
if units == 'Hz':
self.landscape.append(1e9*self.f_hyp(self.x_vec, *popt))
else:
self.landscape.append(self.f_hyp(self.x_vec, *popt))
else:
print 'function type not known...aborting'
raise ValueError
except Exception as message:
print 'fit not successful:', message
popt = p0
def _prepare_measurement_vna(self):
'''
all the relevant settings from the vna are updated and called
'''
self.vna.get_all()
#ttip.get_temperature()
self._nop = self.vna.get_nop()
self._sweeptime_averages = self.vna.get_sweeptime_averages()
self._freqpoints = self.vna.get_freqpoints()
if self.averaging_start_ready: self.vna.pre_measurement()
def _prepare_measurement_file(self):
'''
creates the output .h5-file with distinct dataset structures for each measurement type.
at this point all measurement parameters are known and put in the output file
'''
self._data_file = hdf.Data(name=self._file_name)
self._measurement_object.uuid = self._data_file._uuid
self._measurement_object.hdf_relpath = self._data_file._relpath
self._measurement_object.instruments = qt.instruments.get_instruments()
self._measurement_object.save()
self._mo = self._data_file.add_textlist('measurement')
self._mo.append(self._measurement_object.get_JSON())
# write logfile and instrument settings
self._write_settings_dataset()
self._log = waf.open_log_file(self._data_file.get_filepath())
if not self._scan_time:
self._data_freq = self._data_file.add_coordinate('frequency', unit = 'Hz')
self._data_freq.add(self._freqpoints)
if self._scan_1D:
self._data_real = self._data_file.add_value_vector('real', x = self._data_freq, unit = '', save_timestamp = True)
self._data_imag = self._data_file.add_value_vector('imag', x = self._data_freq, unit = '', save_timestamp = True)
self._data_amp = self._data_file.add_value_vector('amplitude', x = self._data_freq, unit = 'arb. unit', save_timestamp = True)
self._data_pha = self._data_file.add_value_vector('phase', x = self._data_freq, unit = 'rad', save_timestamp = True)
if self._scan_2D:
self._data_x = self._data_file.add_coordinate(self.x_coordname, unit = self.x_unit)
self._data_x.add(self.x_vec)
self._data_amp = self._data_file.add_value_matrix('amplitude', x = self._data_x, y = self._data_freq, unit = 'arb. unit', save_timestamp = True)
self._data_pha = self._data_file.add_value_matrix('phase', x = self._data_x, y = self._data_freq, unit='rad', save_timestamp = True)
if self.log_function != None: #use logging
self._log_value = []
for i in range(len(self.log_function)):
self._log_value.append(self._data_file.add_value_vector(self.log_name[i], x = self._data_x, unit = self.log_unit[i], dtype=self.log_dtype[i]))
if self._nop < 10:
"""creates view: plot middle point vs x-parameter, for qubit measurements"""
self._data_amp_mid = self._data_file.add_value_vector('amplitude_midpoint', unit = 'arb. unit', x = self._data_x, save_timestamp = True)
self._data_pha_mid = self._data_file.add_value_vector('phase_midpoint', unit = 'rad', x = self._data_x, save_timestamp = True)
#self._view = self._data_file.add_view("amplitude vs. " + self.x_coordname, x = self._data_x, y = self._data_amp[self._nop/2])
if self._scan_3D:
self._data_x = self._data_file.add_coordinate(self.x_coordname, unit = self.x_unit)
self._data_x.add(self.x_vec)
self._data_y = self._data_file.add_coordinate(self.y_coordname, unit = self.y_unit)
self._data_y.add(self.y_vec)
if self._nop == 0: #saving in a 2D matrix instead of a 3D box HR: does not work yet !!! test things before you put them online.
self._data_amp = self._data_file.add_value_matrix('amplitude', x = self._data_x, y = self._data_y, unit = 'arb. unit', save_timestamp = False)
self._data_pha = self._data_file.add_value_matrix('phase', x = self._data_x, y = self._data_y, unit = 'rad', save_timestamp = False)
else:
self._data_amp = self._data_file.add_value_box('amplitude', x = self._data_x, y = self._data_y, z = self._data_freq, unit = 'arb. unit', save_timestamp = False)
self._data_pha = self._data_file.add_value_box('phase', x = self._data_x, y = self._data_y, z = self._data_freq, unit = 'rad', save_timestamp = False)
if self.log_function != None: #use logging
self._log_value = []
for i in range(len(self.log_function)):
self._log_value.append(self._data_file.add_value_vector(self.log_name[i], x = self._data_x, unit = self.log_unit[i], dtype=self.log_dtype[i]))
if self._scan_time:
self._data_freq = self._data_file.add_coordinate('frequency', unit = 'Hz')
self._data_freq.add([self.vna.get_centerfreq()])
self._data_time = self._data_file.add_coordinate('time', unit = 's')
self._data_time.add(np.arange(0,self._nop,1)*self.vna.get_sweeptime()/(self._nop-1))
self._data_x = self._data_file.add_coordinate('trace_number', unit = '')
self._data_x.add(np.arange(0, self.number_of_timetraces, 1))
self._data_amp = self._data_file.add_value_matrix('amplitude', x = self._data_x, y = self._data_time, unit = 'lin. mag.', save_timestamp = False)
self._data_pha = self._data_file.add_value_matrix('phase', x = self._data_x, y = self._data_time, unit = 'rad.', save_timestamp = False)
if self.comment:
self._data_file.add_comment(self.comment)
if self.qviewkit_singleInstance and self.open_qviewkit and self._qvk_process:
self._qvk_process.terminate() #terminate an old qviewkit instance
def _write_settings_dataset(self):
self._settings = self._data_file.add_textlist('settings')
settings = waf.get_instrument_settings(self._data_file.get_filepath())
self._settings.append(settings)
def measure_1D(self, rescan = True, web_visible = True):
'''
measure method to record a single (averaged) VNA trace, S11 or S21 according to the setting on the VNA
rescan: If True (default), the averages on the VNA are cleared and a new measurement is started.
If False, it will directly take the data from the VNA without waiting.
'''
self._scan_1D = True
self._scan_2D = False
self._scan_3D = False
self._scan_time = False
self._measurement_object.measurement_func = 'measure_1D'
self._measurement_object.x_axis = 'frequency'
self._measurement_object.y_axis = ''
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = 'VNA_tracedata'
self._file_name = self.dirname.replace(' ', '').replace(',','_')
if self.exp_name:
self._file_name += '_' + self.exp_name
self._prepare_measurement_vna()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['amplitude', 'phase'])
if self._fit_resonator:
self._resonator = resonator(self._data_file.get_filepath())
print 'recording trace...'
sys.stdout.flush()
qt.mstart()
if rescan:
if self.averaging_start_ready:
self.vna.start_measurement()
ti = time()
if self.progress_bar: self._p = Progress_Bar(self.vna.get_averages(),self.dirname,self.vna.get_sweeptime())
qt.msleep(.2)
while not self.vna.ready():
if time()-ti > self.vna.get_sweeptime(query=False):
if self.progress_bar: self._p.iterate()
ti = time()
qt.msleep(.2)
if self.progress_bar:
while self._p.progr < self._p.max_it:
self._p.iterate()
else:
self.vna.avg_clear()
if self.vna.get_averages() == 1 or self.vna.get_Average() == False: #no averaging
if self.progress_bar:self._p = Progress_Bar(1,self.dirname,self.vna.get_sweeptime())
qt.msleep(self.vna.get_sweeptime()) #wait single sweep
if self.progress_bar: self._p.iterate()
else: #with averaging
if self.progress_bar: self._p = Progress_Bar(self.vna.get_averages(),self.dirname,self.vna.get_sweeptime())
if "avg_status" in self.vna.get_function_names():
for a in range(self.vna.get_averages()):
while self.vna.avg_status() <= a:
qt.msleep(.2) #maybe one would like to adjust this at a later point
if self.progress_bar: self._p.iterate()
else: #old style
for a in range(self.vna.get_averages()):
qt.msleep(self.vna.get_sweeptime()) #wait single sweep time
if self.progress_bar: self._p.iterate()
data_amp, data_pha = self.vna.get_tracedata()
data_real, data_imag = self.vna.get_tracedata('RealImag')
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
self._data_real.append(data_real)
self._data_imag.append(data_imag)
if self._fit_resonator:
self._do_fit_resonator()
qt.mend()
self._end_measurement()
def measure_2D(self, web_visible = True):
'''
measure method to record a (averaged) VNA trace, S11 or S21 according to the setting on the VNA
for all parameters x_vec in x_obj
'''
if not self.x_set_obj:
logging.error('axes parameters not properly set...aborting')
return
self._scan_1D = False
self._scan_2D = True
self._scan_3D = False
self._scan_time = False
self._measurement_object.measurement_func = 'measure_2D'
self._measurement_object.x_axis = self.x_coordname
self._measurement_object.y_axis = 'frequency'
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = self.x_coordname
self._file_name = '2D_' + self.dirname.replace(' ', '').replace(',','_')
if self.exp_name:
self._file_name += '_' + self.exp_name
if self.progress_bar: self._p = Progress_Bar(len(self.x_vec),'2D VNA sweep '+self.dirname,self.vna.get_sweeptime_averages())
self._prepare_measurement_vna()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
if self._nop < 10:
if self.open_qviewkit: self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['amplitude_midpoint', 'phase_midpoint'])
else:
if self.open_qviewkit: self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['amplitude', 'phase'])
if self._fit_resonator:
self._resonator = resonator(self._data_file.get_filepath())
self._measure()
def measure_3D(self, web_visible = True):
'''
measure full window of vna while sweeping x_set_obj and y_set_obj with parameters x_vec/y_vec. sweep over y_set_obj is the inner loop, for every value x_vec[i] all values y_vec are measured.
optional: measure method to perform the measurement according to landscape, if set
self.span is the range (in units of the vertical plot axis) data is taken around the specified funtion(s)
note: make sure to have properly set x,y vectors before generating traces
'''
if not self.x_set_obj or not self.y_set_obj:
logging.error('axes parameters not properly set...aborting')
return
self._scan_1D = False
self._scan_2D = False
self._scan_3D = True
self._scan_time = False
self._measurement_object.measurement_func = 'measure_3D'
self._measurement_object.x_axis = self.x_coordname
self._measurement_object.y_axis = self.y_coordname
self._measurement_object.z_axis = 'frequency'
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = self.x_coordname + ', ' + self.y_coordname
self._file_name = '3D_' + self.dirname.replace(' ', '').replace(',','_')
if self.exp_name:
self._file_name += '_' + self.exp_name
if self.progress_bar: self._p = Progress_Bar(len(self.x_vec)*len(self.y_vec),'3D VNA sweep '+self.dirname,self.vna.get_sweeptime_averages())
self._prepare_measurement_vna()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
"""only middle point in freq array is plotted vs x and y"""
if self.open_qviewkit: self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['amplitude', 'phase'])
if self._fit_resonator:
self._resonator = resonator(self._data_file.get_filepath())
if self.landscape:
self.center_freqs = np.array(self.landscape).T
else:
self.center_freqs = [] #load default sequence
for i in range(len(self.x_vec)):
self.center_freqs.append([0])
self._measure()
def measure_timetrace(self, web_visible = True):
'''
measure method to record a single VNA timetrace, this only makes sense when span is set to 0 Hz!,
tested only with KEYSIGHT E5071C ENA and its corresponding qkit driver
LGruenhaupt 11/2016
'''
if self.vna.get_span() > 0:
print 'VNA span not set to 0 Hz... aborting'
return
self._scan_1D = False
self._scan_2D = False
self._scan_3D = False
self._scan_time = True
self._measurement_object.measurement_func = 'measure_timetrace'
self._measurement_object.x_axis = 'time'
self._measurement_object.y_axis = ''
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = 'VNA_timetrace'
self._file_name = self.dirname.replace(' ', '').replace(',','_')
if self.exp_name:
self._file_name += '_' + self.exp_name
self.x_vec = np.arange(0,self.number_of_timetraces,1)
self._prepare_measurement_vna()
self._prepare_measurement_file()
if self.progress_bar: self._p = Progress_Bar(self.number_of_timetraces,'VNA timetrace '+self.dirname,self.vna.get_sweeptime_averages())
print 'recording timetrace(s)...'
sys.stdout.flush()
qt.mstart()
try:
"""
loop: x_obj with parameters from x_vec
"""
for i, x in enumerate(self.x_vec):
if self.log_function != None:
for i,f in enumerate(self.log_function):
self._log_value[i].append(float(f()))
if self.averaging_start_ready: #LG 11/2016
self.vna.start_measurement()
ti = time() #changed from time.time() to time() - LGruenhaupt OCT_2016
tp = time() #added to enable use of progress bar
#self._p = Progress_Bar(self.vna.get_averages(),self.dirname,self.vna.get_sweeptime_averages()) moved to line 303
''' This is to prevent the vna.ready() function from timing out. LG NOV/16 '''
if self.vna.get_Average():
print 'this function only makes sense without averaging'
qt.mend()
self._end_measuremt()
else:
#self._p = Progress_Bar(1,self.dirname,self.vna.get_sweeptime())
qt.msleep(self.vna.get_sweeptime())
#self._p.iterate()
while not self.vna.ready(): qt.msleep(.2) #this is just to check if the measurement has finished
data_amp, data_pha = self.vna.get_tracedata()
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
qt.msleep()
if self.progress_bar:
self._p.iterate()
else:
print 'not implemented for this VNA, only works with Keysight ENA 5071C'
qt.mend()
self._end_measurement()
except Exception as e:
print e.__doc__
print e.message
finally:
self._end_measurement()
qt.mend()
def _measure(self):
'''
measures and plots the data depending on the measurement type.
the measurement loops feature the setting of the objects and saving the data in the .h5 file.
'''
qt.mstart()
try:
"""
loop: x_obj with parameters from x_vec
"""
for ix, x in enumerate(self.x_vec):
self.x_set_obj(x)
sleep(self.tdx)
if self.log_function != None:
for i,f in enumerate(self.log_function):
self._log_value[i].append(float(f()))
if self._scan_3D:
for y in self.y_vec:
"""
loop: y_obj with parameters from y_vec (only 3D measurement)
"""
if (np.min(np.abs(self.center_freqs[ix]-y*np.ones(len(self.center_freqs[ix])))) > self.span/2.) and self.landscape: #if point is not of interest (not close to one of the functions)
data_amp = np.zeros(int(self._nop))
data_pha = np.zeros(int(self._nop)) #fill with zeros
else:
self.y_set_obj(y)
sleep(self.tdy)
if self.averaging_start_ready:
self.vna.start_measurement()
qt.msleep(.2) #just to make sure, the ready command does not *still* show ready
while not self.vna.ready():
qt.msleep(.2)
else:
self.vna.avg_clear()
qt.msleep(self._sweeptime_averages)
#if "avg_status" in self.vna.get_function_names():
# while self.vna.avg_status() < self.vna.get_averages():
# qt.msleep(.2) #maybe one would like to adjust this at a later point
""" measurement """
data_amp, data_pha = self.vna.get_tracedata()
if self._nop == 0: # this does not work yet.
print data_amp[0], data_amp, self._nop
self._data_amp.append(data_amp[0])
self._data_pha.append(data_pha[0])
else:
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
if self._fit_resonator:
self._do_fit_resonator()
if self.progress_bar:
self._p.iterate()
qt.msleep()
"""
filling of value-box is done here.
after every y-loop the data is stored the next 2d structure
"""
self._data_amp.next_matrix()
self._data_pha.next_matrix()
if self._scan_2D:
if self.averaging_start_ready:
self.vna.start_measurement()
qt.msleep(.2) #just to make sure, the ready command does not *still* show ready
while not self.vna.ready():
qt.msleep(.2)
else:
self.vna.avg_clear()
qt.msleep(self._sweeptime_averages)
""" measurement """
data_amp, data_pha = self.vna.get_tracedata()
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
if self._nop < 10:
#print data_amp[self._nop/2]
self._data_amp_mid.append(float(data_amp[self._nop/2]))
self._data_pha_mid.append(float(data_pha[self._nop/2]))
if self._fit_resonator:
self._do_fit_resonator()
if self.progress_bar:
self._p.iterate()
qt.msleep()
except Exception as e:
print e.__doc__
print e.message
finally:
self._end_measurement()
qt.mend()
def _end_measurement(self):
'''
the data file is closed and filepath is printed
'''
print self._data_file.get_filepath()
#qviewkit.save_plots(self._data_file.get_filepath(),comment=self._plot_comment) #old version where we have to wait for the plots
t = threading.Thread(target=qviewkit.save_plots,args=[self._data_file.get_filepath(),self._plot_comment])
t.start()
self._data_file.close_file()
waf.close_log_file(self._log)
self.dirname = None
if self.averaging_start_ready: self.vna.post_measurement()
def set_resonator_fit(self,fit_resonator=True,fit_function='',f_min=None,f_max=None):
'''
sets fit parameter for resonator
fit_resonator (bool): True or False, default: True (optional)
fit_function (string): function which will be fitted to the data (optional)
f_min (float): lower frequency boundary for the fitting function, default: None (optional)
f_max (float): upper frequency boundary for the fitting function, default: None (optional)
fit types: 'lorentzian','skewed_lorentzian','circle_fit_reflection', 'circle_fit_notch','fano'
'''
if not fit_resonator:
self._fit_resonator = False
return
self._functions = {'lorentzian':0,'skewed_lorentzian':1,'circle_fit_reflection':2,'circle_fit_notch':3,'fano':5,'all_fits':5}
try:
self._fit_function = self._functions[fit_function]
except KeyError:
logging.error('Fit function not properly set. Must be either \'lorentzian\', \'skewed_lorentzian\', \'circle_fit_reflection\', \'circle_fit_notch\', \'fano\', or \'all_fits\'.')
else:
self._fit_resonator = True
self._f_min = f_min
self._f_max = f_max
def _do_fit_resonator(self):
'''
calls fit function in resonator class
fit function is specified in self.set_fit, with boundaries f_mim and f_max
only the last 'slice' of data is fitted, since we fit live while measuring.
'''
if self._fit_function == 0: #lorentzian
self._resonator.fit_lorentzian(f_min=self._f_min, f_max = self._f_max)
if self._fit_function == 1: #skewed_lorentzian
self._resonator.fit_skewed_lorentzian(f_min=self._f_min, f_max = self._f_max)
if self._fit_function == 2: #circle_reflection
self._resonator.fit_circle(reflection = True, f_min=self._f_min, f_max = self._f_max)
if self._fit_function == 3: #circle_notch
self._resonator.fit_circle(notch = True, f_min=self._f_min, f_max = self._f_max)
if self._fit_function == 4: #fano
self._resonator.fit_fano(f_min=self._f_min, f_max = self._f_max)
#if self._fit_function == 5: #all fits
#self._resonator.fit_all_fits(f_min=self._f_min, f_max = self._f_max)
def delete_fit_function(self, n = None):
'''
delete single fit function n (with 0 being the first one generated) or the complete landscape for n not specified
'''
if n:
self.landscape = np.delete(self.landscape, n, axis=0)
else:
self.landscape = None
def plot_fit_function(self, num_points = 100):
'''
try:
x_coords = np.linspace(self.x_vec[0], self.x_vec[-1], num_points)
except Exception as message:
print 'no x axis information specified', message
return
'''
if self.landscape:
for trace in self.landscape:
try:
#plt.clear()
plt.plot(self.x_vec, trace)
plt.fill_between(self.x_vec, trace+float(self.span)/2, trace-float(self.span)/2, alpha=0.5)
except Exception:
print 'invalid trace...skip'
plt.axhspan(self.y_vec[0], self.y_vec[-1], facecolor='0.5', alpha=0.5)
plt.show()
else:
print 'No trace generated.'
def set_span(self, span):
self.span = span
def get_span(self):
return self.span
def set_tdx(self, tdx):
self.tdx = tdx
def set_tdy(self, tdy):
self.tdy = tdy
def get_tdx(self):
return self.tdx
def get_tdy(self):
return self.tdy
def f_parab(self,x,a,b,c):
return a*(x-b)**2+c
def f_hyp(self,x,a,b,c):
"hyperbolic function with the form y = sqrt[ a*(x-b)**2 + c ]"
return np.sqrt(a*(x-b)**2+c)
def set_plot_comment(self, comment):
'''
Small comment to add at the end of plot pics for more information i.e. good for wiki entries.
'''
self._plot_comment=comment
class QmQkitWrapper:
def __init__(self):
self.exp_name = None
self.dirname = "" # TODO new name
self.comment = ""
self.sourcecode = ""
self.sample = None
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'TimeDomain'
self._measurement_object.sample = self.sample
# data
self.coords = {}
self.values = {}
# Decorator to start qkit
def measure(func):
def wrapper(self, *args, **kwargs):
save = False
if 'save' in kwargs:
save = kwargs['save']
kwargs.pop('save', None)
if save:
qkit.flow.start()
output = func(self, *args, **kwargs)
if save:
if self.dirname:
self._file_name = 'QM_experiment_' + self.exp_name + '_' + self.dirname
else:
self._file_name = 'QM_experiment_' + self.exp_name
self._file_name = self._file_name.replace(' ', '').replace(
',', '_')
# Save function arguments and qm program
astring = ""
for value in args:
astring += "{}, ".format(value)
kstring = ""
for key, value in kwargs.items():
kstring += "{} = {}, ".format(key, value)
self.sourcecode = astring + kstring + "\n\n\n" + inspect.getsource(
func)
self._prepare_measurement_file()
self.store_data()
qkit.flow.end()
self.close_files()
print('Measurement complete: {:s}'.format(
self._data_file.get_filepath()))
else:
print('Measurement complete')
return output
return wrapper
def _prepare_measurement_file(self):
'''
creates the output .h5-file with distinct dataset structures for each measurement type.
at this point all measurement parameters are known and put in the output file
'''
self._data_file = hdf.Data(name=self._file_name, mode='a')
self._measurement_object.uuid = self._data_file._uuid
self._measurement_object.hdf_relpath = self._data_file._relpath
self._measurement_object.instruments = qkit.instruments.get_instrument_names(
)
self._measurement_object.save()
self._mo = self._data_file.add_textlist('measurement')
self._mo.append(self._measurement_object.get_JSON())
# instrument settings and logfile
self._settings = self._data_file.add_textlist('settings')
settings = waf.get_instrument_settings(self._data_file.get_filepath())
self._settings.append(settings)
self._log_file = waf.open_log_file(self._data_file.get_filepath())
def close_files(self):
# save plots and close files
# t = threading.Thread(target=qviewkit.save_plots, args=[self._data_file.get_filepath()])
# t.start()
self._data_file.flush()
self._data_file.close_file()
waf.close_log_file(self._log_file)
# TODO open qkit
# if self.qviewkit_singleInstance and self.open_qviewkit and self._qvk_process:
# self._qvk_process.terminate() # terminate an old qviewkit instance
def store_data(self):
"""
"""
coord_dic = {}
for key in self.coords:
coord_vec = self.coords[key][0]
unit = self.coords[key][1]
coords_file = self._data_file.add_coordinate(key, unit=unit)
coords_file.add(coord_vec)
coord_dic[key] = coords_file
for key in self.values:
values = self.values[key][0]
coord_key_list = self.values[key][1]
unit = self.values[key][2]
if len(coord_key_list) == 1:
value_file = self._data_file.add_value_vector(
key, x=coord_dic[coord_key_list[0]], unit=unit)
value_file.append(values)
elif len(coord_key_list) == 2:
value_file = self._data_file.add_value_matrix(
key,
x=coord_dic[coord_key_list[0]],
y=coord_dic[coord_key_list[1]],
unit=unit)
# file initialization - workaround
value_file.append(values[0, :])
elif len(coord_key_list) == 3:
value_file = self._data_file.add_value_box(
key,
x=coord_dic[coord_key_list[0]],
y=coord_dic[coord_key_list[1]],
z=coord_dic[coord_key_list[2]],
unit=unit)
# file initialization - workaround
value_file.append(values[0, 0, :])
value_file.ds.resize(values.shape)
value_file.ds[:] = values
# source code
sourcecode_file = self._data_file.add_textlist('sourcecode')
sourcecode_file.append(self.sourcecode)
# comment
if self.comment:
self._data_file.add_comment(self.comment)
class Measure_td(object):
'''
useage:
m = Measure_td()
m.set_x_parameters(arange(-0.05,0.05,0.01),'flux coil current (mA)',coil.set_current)
m.set_y_parameters(arange(4e9,7e9,10e6),'excitation frequency (Hz)',mw_src1.set_frequency)
m.measure_XX()
Generally, we want to use
ReadoutTrace = True -> if we want to record the readout pulse or
AWGTrace = True -> if we have a N different time steps in the AWG (Not used, this is done via the mode variable now.)
ToDO (S1, 09/2017):
- Include LogFunctions
- Include 2D_AWG with pre-averaging
- Check multi-tone readout
'''
def __init__(self, sample, readout=None):
self.sample = sample
if readout is None:
self.readout = sample.readout
else:
self.readout = readout
self.comment = None
self.mode = None
self.x_set_obj = None
self.y_set_obj = None
self.z_set_obj = None
self.dirname = None
self.data_dir = None
self.plotSuffix = ''
self.hold = False
self.show_progress_bar = True
self.ReadoutTrace = False
self.open_qviewkit = True
self.create_averaged_data = False
self.qviewkit_singleInstance = True
self._qvk_process = False
self._plot_comment = ''
self.multiplex_attribute = "readout_pulse_frequency"
self.multiplex_unit = "Hz"
self.init = iniTD(sample)
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'timedomain'
self._measurement_object.sample = self.sample
self.state_0_cal = None
self.state_1_cal = None
def set_x_parameters(self, x_vec, x_coordname, x_set_obj, x_unit=None):
self.x_vec = x_vec
self.x_coordname = x_coordname
self.x_set_obj = x_set_obj
if x_unit is None:
logging.warning(__name__ + ': Unit of the x-axis is not set.')
self.x_unit = ''
else:
self.x_unit = x_unit
def set_y_parameters(self, y_vec, y_coordname, y_set_obj, y_unit=None):
self.y_vec = y_vec
self.y_coordname = y_coordname
self.y_set_obj = y_set_obj
if y_unit is None:
logging.warning(__name__ + ': Unit of the y-axis is not set.')
self.y_unit = ''
else:
self.y_unit = y_unit
def set_z_parameters(self, z_vec, z_coordname, z_set_obj, z_unit=None):
self.z_vec = z_vec
self.z_coordname = z_coordname
self.z_set_obj = z_set_obj
if z_unit is None:
logging.warning(__name__ + ': Unit of the z-axis is not set.')
self.z_unit = ''
else:
self.z_unit = z_unit
def measure_1D(self):
if self.x_set_obj is None:
raise ValueError('x-axes parameters not properly set')
self.mode = 1 # 1: 1D, 2: 2D, 3:1D_AWG/2D_AWG, 4:3D_AWG
self._prepare_measurement_file()
if self.show_progress_bar:
p = Progress_Bar(len(self.x_vec), name=self.dirname)
try:
# measurement loop
for x in self.x_vec:
self.x_set_obj(x)
qkit.flow.sleep()
self._append_data()
if self.show_progress_bar: p.iterate()
finally:
self._end_measurement()
def measure_2D(self):
if self.x_set_obj is None or self.y_set_obj is None:
raise ValueError('Axes parameters not properly set')
if self.ReadoutTrace:
raise ValueError(
'ReadoutTrace is currently not supported for 2D measurements')
self.mode = 2 # 1: 1D, 2: 2D, 3:1D_AWG/2D_AWG, 4:3D_AWG
self._prepare_measurement_file()
if self.show_progress_bar:
p = Progress_Bar(len(self.x_vec) * len(self.y_vec),
name=self.dirname)
try:
# measurement loop
for x in self.x_vec:
self.x_set_obj(x)
for y in self.y_vec:
qkit.flow.sleep()
self.y_set_obj(y)
qkit.flow.sleep()
self._append_data()
if self.show_progress_bar: p.iterate()
for i in range(self.ndev):
self._hdf_amp[i].next_matrix()
self._hdf_pha[i].next_matrix()
finally:
self._end_measurement()
def measure_1D_AWG(self, iterations=100):
'''
use AWG sequence for x_vec, averaging over iterations
'''
self.y_vec = range(iterations)
self.y_coordname = 'iteration'
self.y_set_obj = lambda y: True
self.y_unit = ''
self.create_averaged_data = True
self.avg_complex_sum = np.zeros_like(self.x_vec)
try:
return self.measure_2D_AWG(iterations=1)
finally:
self.create_averaged_data = False # This is ALWAYS done after the return! Looks strange and it really is, but it works.
def measure_2D_AWG(self, iterations=1):
'''
x_vec is sequence in AWG
'''
if self.y_set_obj is None:
raise ValueError('y-axes parameters not properly set')
qkit.flow.sleep(
) # if stop button was pressed by now, abort without creating data files
if iterations > 1:
self.z_vec = range(iterations)
self.z_coordname = 'iteration'
self.z_set_obj = lambda z: True
self.z_unit = ''
self.measure_3D_AWG()
# For 3D measurements with iterations, averages are only created at the end to get a consistent averaging base.
hdf_file = hdf.Data(self._hdf.get_filepath())
for j in range(self.ndev):
amp = np.array(hdf_file["/entry/data0/amplitude_%i" % j])
pha = np.array(hdf_file["/entry/data0/phase_%i" % j])
amp_avg = sum(amp[i] for i in range(iterations)) / iterations
pha_avg = sum(pha[i] for i in range(iterations)) / iterations
hdf_amp_avg = hdf_file.add_value_matrix('amplitude_avg_%i' % i,
x=self._hdf_y,
y=self._hdf_x,
unit='a.u.')
hdf_pha_avg = hdf_file.add_value_matrix('phase_avg_%i' % i,
x=self._hdf_y,
y=self._hdf_x,
unit='rad')
for i in range(len(self.y_vec)):
hdf_amp_avg.append(amp_avg[i])
hdf_pha_avg.append(pha_avg[i])
hdf_file.close_file()
else:
self.mode = 3 # 1: 1D, 2: 2D, 3:1D_AWG/2D_AWG, 4:3D_AWG
self._prepare_measurement_file()
# if self.ndev > 1: raise ValueError('Multiplexed readout is currently not supported for 2D measurements')
if self.show_progress_bar:
p = Progress_Bar(len(self.y_vec), name=self.dirname)
try:
# measurement loop
for it in range(len(self.y_vec)):
qkit.flow.sleep(
) # better done during measurement (waiting for trigger)
self.y_set_obj(self.y_vec[it])
self._append_data(iteration=it)
if self.show_progress_bar: p.iterate()
finally:
self._end_measurement()
def measure_3D_AWG(self):
'''
x_vec is sequence in AWG
'''
if self.z_set_obj is None or self.y_set_obj is None:
raise ValueError('x-axes parameters not properly set')
if self.ReadoutTrace:
raise ValueError(
'ReadoutTrace is currently not supported for 3D_AWG measurements'
)
self.mode = 4 # 1: 1D, 2: 2D, 3:1D_AWG/2D_AWG, 4:3D_AWG
self._prepare_measurement_file()
if self.show_progress_bar:
p = Progress_Bar(len(self.y_vec) * len(self.z_vec),
name=self.dirname)
try:
# measurement loop
for z in self.z_vec:
self.z_set_obj(z)
for y in self.y_vec:
qkit.flow.sleep()
self.y_set_obj(y)
qkit.flow.sleep()
self._append_data()
if self.show_progress_bar: p.iterate()
for i in range(self.ndev):
self._hdf_amp[i].next_matrix()
self._hdf_pha[i].next_matrix()
finally:
self._end_measurement()
def measure_1D_ddc_time_trace(self):
"""
measures the time evolution of your transmission / reflection
in your network by performing a digital down conversion
:return: None
"""
time_end = float(self.sample.mspec.get_samples()
) / self.sample.mspec.get_samplerate()
time_array = np.linspace(0, time_end, self.sample.mspec.get_samples())
self.set_x_parameters(time_array, 'time', True, 'sec')
self.mode = 1 # 1: 1D, 2: 2D, 3:1D_AWG/2D_AWG
self._prepare_measurement_file()
try:
qkit.flow.sleep()
self._append_data(ddc=True)
finally:
self._end_measurement()
def measure_2D_ddc_time_trace(self):
"""
Performs a digital down conversion for exactly one value in your awg sequence. But you can sweep other
parameters, such as mw-power or so.
:return:
"""
if self.y_set_obj is None:
raise ValueError('y-axes parameters not properly set')
time_end = float(self.sample.mspec.get_samples()
) / self.sample.mspec.get_samplerate()
time_array = np.linspace(0, time_end, self.sample.mspec.get_samples())
self.set_x_parameters(time_array, 'time', True, 'sec')
self.mode = 2 # 1: 1D, 2: 2D, 3:1D_AWG/2D_AWG
self._prepare_measurement_file()
if self.show_progress_bar:
p = Progress_Bar(len(self.y_vec), name=self.dirname)
try:
for y in self.y_vec:
qkit.flow.sleep()
self.y_set_obj(y)
qkit.flow.sleep()
self._append_data(ddc=True)
if self.show_progress_bar: p.iterate()
finally:
self._end_measurement()
def measure_1D_awg_ddc_timetrace(self):
"""
Performs a digital down conversion of your readout trace for every value in your y-vector,
whereas y_vec should be awg sequence. This function is useful for magnon cavity experiments.
x-vec is automatically set by acquisition window.
(Also, all data are there at once)
:return:
"""
if self.y_vec is None:
raise ValueError('y-axes parameters not properly set')
time_end = float(self.sample.mspec.get_samples()
) / self.sample.mspec.get_samplerate()
time_array = np.linspace(0, time_end, self.sample.mspec.get_samples())
self.set_x_parameters(time_array, 'time', True, 'sec')
self.mode = 2 # 1: 1D, 2: 2D, 3:1D_AWG/2D_AWG
self._prepare_measurement_file()
try:
qkit.flow.sleep()
self._append_data(ddc=True)
finally:
self._end_measurement()
def measure_1D_awg_1D_ddc_timetrace(self):
"""
Performs a digital down conversion of your readout trace for every value in your y-vector
while also sweeping another parameter. y_vec should be awg sequence and z_vec/obj the sweeping parameter.
x-vec is automatically set by acquisition window.
:return:
"""
if (self.y_vec is None) or (self.z_set_obj is None):
raise ValueError('Axes parameters not properly set')
time_end = float(self.sample.mspec.get_samples()
) / self.sample.mspec.get_samplerate()
time_array = np.linspace(0, time_end, self.sample.mspec.get_samples())
self.set_x_parameters(time_array, 'time', True, 'sec')
self.mode = 4
self._prepare_measurement_file()
try:
for z in self.z_vec:
self.z_set_obj(z)
qkit.flow.sleep()
self._append_data(ddc=True)
for i in range(self.ndev):
self._hdf_amp[i].next_matrix()
self._hdf_pha[i].next_matrix()
if self.ReadoutTrace:
self._hdf_I.next_matrix()
self._hdf_Q.next_matrix()
finally:
self._end_measurement()
def _prepare_measurement_file(self):
qkit.flow.start()
if self.dirname is None:
self.dirname = self.x_coordname
self.ndev = len(self.readout.get_tone_freq(
)) # returns array of readout freqs (=1 for non-multiplexed readout)
self._hdf = hdf.Data(name=self.dirname, mode='a')
self._hdf_x = self._hdf.add_coordinate(self.x_coordname,
unit=self.x_unit)
self._hdf_x.add(self.x_vec)
self._measurement_object.uuid = self._hdf._uuid
self._measurement_object.hdf_relpath = self._hdf._relpath
self._measurement_object.instruments = qkit.instruments.get_instrument_names(
)
self._measurement_object.save()
self._mo = self._hdf.add_textlist('measurement')
self._mo.append(self._measurement_object.get_JSON())
self._settings = self._hdf.add_textlist('settings')
settings = waf.get_instrument_settings(self._hdf.get_filepath())
self._settings.append(settings)
self._log = waf.open_log_file(self._hdf.get_filepath())
self._hdf_readout_frequencies = self._hdf.add_coordinate(
self.multiplex_attribute, unit=self.multiplex_unit)
self._hdf_readout_frequencies.add(self.readout.get_tone_freq())
if self.state_0_cal and self.state_1_cal and self.mode > 2:
#Adds calibration of ground and excited state of qubit for visualization of population during measurement
self._hdf_state_0 = self._hdf.add_coordinate("State 0 Calibration")
self._hdf_state_0.add(self.state_0_cal)
self._hdf_state_1 = self._hdf.add_coordinate("State 1 Calibration")
self._hdf_state_1.add(self.state_1_cal)
if self.ReadoutTrace:
self._hdf_TimeTraceAxis = self._hdf.add_coordinate(
'recorded timepoint', unit='s')
self._hdf_TimeTraceAxis.add(
np.arange(self.sample.mspec.get_samples()) /
self.readout.get_adc_clock())
if self.mode == 1: # 1D
self._hdf_amp = []
self._hdf_pha = []
for i in range(self.ndev):
self._hdf_amp.append(
self._hdf.add_value_vector('amplitude_%i' % i,
x=self._hdf_x,
unit='a.u.'))
self._hdf_pha.append(
self._hdf.add_value_vector('phase_%i' % i,
x=self._hdf_x,
unit='rad'))
if self.ReadoutTrace:
self._hdf_I = self._hdf.add_value_matrix(
'I_TimeTrace',
x=self._hdf_x,
y=self._hdf_TimeTraceAxis,
unit='V',
save_timestamp=False)
self._hdf_Q = self._hdf.add_value_matrix(
'Q_TimeTrace',
x=self._hdf_x,
y=self._hdf_TimeTraceAxis,
unit='V',
save_timestamp=False)
elif self.mode == 2: # 2D
self._hdf_y = self._hdf.add_coordinate(self.y_coordname,
unit=self.y_unit)
self._hdf_y.add(self.y_vec)
self._hdf_amp = []
self._hdf_pha = []
for i in range(self.ndev):
self._hdf_amp.append(
self._hdf.add_value_matrix('amplitude_%i' % i,
x=self._hdf_x,
y=self._hdf_y,
unit='a.u.'))
self._hdf_pha.append(
self._hdf.add_value_matrix('phase_%i' % i,
x=self._hdf_x,
y=self._hdf_y,
unit='rad'))
if self.ReadoutTrace:
# TODO: One dimension missing here?
self._hdf_I = self._hdf.add_value_matrix(
'I_TimeTrace',
x=self._hdf_y,
y=self._hdf_TimeTraceAxis,
unit='V',
save_timestamp=False)
self._hdf_Q = self._hdf.add_value_matrix(
'Q_TimeTrace',
x=self._hdf_y,
y=self._hdf_TimeTraceAxis,
unit='V',
save_timestamp=False)
elif self.mode == 3: # 1D_AWG/2D_AWG
self._hdf_y = self._hdf.add_coordinate(self.y_coordname,
unit=self.y_unit)
self._hdf_y.add(self.y_vec)
self._hdf_amp = []
self._hdf_pha = []
self._hdf_p1 = []
for i in range(self.ndev):
self._hdf_amp.append(
self._hdf.add_value_matrix('amplitude_%i' % i,
x=self._hdf_y,
y=self._hdf_x,
unit='a.u.'))
self._hdf_pha.append(
self._hdf.add_value_matrix('phase_%i' % i,
x=self._hdf_y,
y=self._hdf_x,
unit='rad'))
if self.state_0_cal and self.state_1_cal:
self._hdf_p1.append(
self._hdf.add_value_matrix("p1_%i" % i,
x=self._hdf_y,
y=self._hdf_x,
unit=""))
if self.ReadoutTrace:
self._hdf_I = self._hdf.add_value_box(
'I_TimeTrace',
x=self._hdf_y,
y=self._hdf_x,
z=self._hdf_TimeTraceAxis,
unit='V',
save_timestamp=False)
self._hdf_Q = self._hdf.add_value_box(
'Q_TimeTrace',
x=self._hdf_y,
y=self._hdf_x,
z=self._hdf_TimeTraceAxis,
unit='V',
save_timestamp=False)
elif self.mode == 4: # 3D_AWG
self._hdf_y = self._hdf.add_coordinate(self.y_coordname,
unit=self.y_unit)
self._hdf_y.add(self.y_vec)
self._hdf_z = self._hdf.add_coordinate(self.z_coordname,
unit=self.z_unit)
self._hdf_z.add(self.z_vec)
self._hdf_amp = []
self._hdf_pha = []
for i in range(self.ndev):
self._hdf_amp.append(
self._hdf.add_value_box('amplitude_%i' % i,
x=self._hdf_z,
y=self._hdf_y,
z=self._hdf_x,
unit='a.u.'))
self._hdf_pha.append(
self._hdf.add_value_box('phase_%i' % i,
x=self._hdf_z,
y=self._hdf_y,
z=self._hdf_x,
unit='rad'))
if self.state_0_cal and self.state_1_cal:
self._hdf_p1.append(
self._hdf.add_value_box("p1_%i" % i,
x=self._hdf_z,
y=self._hdf_y,
z=self._hdf_x,
unit=""))
if self.ReadoutTrace:
self._hdf_I = self._hdf.add_value_box(
'I_TimeTrace',
x=self._hdf_z,
y=self._hdf_y,
z=self._hdf_TimeTraceAxis,
unit='V',
save_timestamp=False)
self._hdf_Q = self._hdf.add_value_box(
'Q_TimeTrace',
x=self._hdf_y,
y=self._hdf_y,
z=self._hdf_TimeTraceAxis,
unit='V',
save_timestamp=False)
if self.create_averaged_data:
self._hdf_amp_avg = []
self._hdf_pha_avg = []
for i in range(self.ndev):
self._hdf_amp_avg.append(
self._hdf.add_value_vector('amplitude_avg_%i' % i,
x=self._hdf_x,
unit='a.u.'))
self._hdf_pha_avg.append(
self._hdf.add_value_vector('phase_avg_%i' % i,
x=self._hdf_x,
unit='rad'))
if self.comment:
self._hdf.add_comment(self.comment)
self._hdf.hf.hf.attrs['default_ds'] = ['data0/amplitude_%i' % i for i in range(min(5,self.ndev))] +\
['data0/phase_%i' % i for i in range(min(5,self.ndev))]
if self.qviewkit_singleInstance and self.open_qviewkit and self._qvk_process:
self._qvk_process.terminate() # terminate an old qviewkit instance
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(
self._hdf.get_filepath(),
datasets=[
'amplitude_%i' % i for i in range(min(5, self.ndev))
] + ['phase_%i' % i for i in range(min(5, self.ndev))])
try:
self.readout.start()
except AttributeError:
pass
def _append_data(self, iteration=0, ddc=None):
if self.ReadoutTrace:
ampliData, phaseData, Is, Qs = self.readout.readout(timeTrace=True,
ddc=ddc)
else:
ampliData, phaseData = self.readout.readout(timeTrace=False,
ddc=ddc)
if len(ampliData.shape) < 3: # "normal" measurements
for i in range(self.ndev):
self._hdf_amp[i].append(np.atleast_1d(ampliData.T[i]))
self._hdf_pha[i].append(np.atleast_1d(phaseData.T[i]))
if self.state_0_cal and self.state_1_cal and self.mode > 2:
I_iter = np.atleast_1d(ampliData.T[i]) * np.sin(
np.atleast_1d(phaseData.T[i]))
Q_iter = np.atleast_1d(ampliData.T[i]) * np.cos(
np.atleast_1d(phaseData.T[i]))
self._hdf_p1[i].append(
((self.state_1_cal[0][0] - self.state_0_cal[0][0]) *
(I_iter - self.state_0_cal[0][0]) +
(self.state_1_cal[1][0] - self.state_0_cal[1][0]) *
(Q_iter - self.state_0_cal[1][0])) /
((self.state_1_cal[0][0] - self.state_0_cal[0][0])**2 +
(self.state_1_cal[1][0] - self.state_0_cal[1][0])**2))
if self.ReadoutTrace:
if self.mode < 3: # mode 2 not yet fully supported but working for DDC timetrace experiments
self._hdf_I.append(Is)
self._hdf_Q.append(Qs)
elif self.mode == 3: # mode 4 not supported for 3D_awg yet
for ix in range(len(self.x_vec)):
self._hdf_I.append(Is[:, ix])
self._hdf_Q.append(Qs[:, ix])
self._hdf_I.next_matrix()
self._hdf_Q.next_matrix()
else: # for AWG DDC ReadoutTrace, all data are there at once
for i in range(self.ndev):
for j in range(ampliData.T.shape[2]):
self._hdf_amp[i].append(np.atleast_1d(ampliData.T[i, :,
j]))
self._hdf_pha[i].append(np.atleast_1d(phaseData.T[i, :,
j]))
if self.ReadoutTrace:
self._hdf_I.append(Is[:, j])
self._hdf_Q.append(Qs[:, j])
if self.create_averaged_data:
if iteration == 0:
self.avg_complex_sum = ampliData * np.exp(1j * phaseData)
for i in range(self.ndev):
self._hdf_amp_avg[i].append(np.atleast_1d(ampliData.T[i]))
self._hdf_pha_avg[i].append(np.atleast_1d(phaseData.T[i]))
else:
self.avg_complex_sum += ampliData * np.exp(1j * phaseData)
amp_avg = np.abs(self.avg_complex_sum / (iteration + 1))
pha_avg = np.angle(self.avg_complex_sum / (iteration + 1))
for i in range(self.ndev):
self._hdf_amp_avg[i].ds.write_direct(
np.ascontiguousarray(np.atleast_1d(amp_avg.T[i])))
self._hdf_pha_avg[i].ds.write_direct(
np.ascontiguousarray(np.atleast_1d(pha_avg.T[i])))
self._hdf_pha_avg[i].ds.attrs['iteration'] = iteration + 1
self._hdf_amp_avg[i].ds.attrs['iteration'] = iteration + 1
self._hdf.flush()
def _end_measurement(self):
try:
self.readout.cleanup()
except AttributeError:
pass
t = threading.Thread(
target=qviewkit.save_plots,
args=[self._hdf.get_filepath(), self._plot_comment])
t.start()
self._hdf.close_file()
waf.close_log_file(self._log)
qkit.flow.end()
def set_plot_comment(self, comment):
'''
Small comment to add at the end of plot pics for more information i.e. good for wiki entries.
'''
self._plot_comment = comment
def add_qubit_state_cal(self, filepath_to_0, filepath_to_1):
state_0_data = hdf.Data(filepath_to_0)
state_1_data = hdf.Data(filepath_to_1)
self.state_0_cal = (state_0_data.data.amplitude_avg_0[:] *
np.sin(state_0_data.data.phase_avg_0[:]),
state_0_data.data.amplitude_avg_0[:] *
np.cos(state_0_data.data.phase_avg_0[:]))
self.state_1_cal = (state_1_data.data.amplitude_avg_0[:] *
np.sin(state_1_data.data.phase_avg_0[:]),
state_1_data.data.amplitude_avg_0[:] *
np.cos(state_1_data.data.phase_avg_0[:]))
state_0_data.close_file()
state_1_data.close_file()
class transport(object):
'''
usage:
m = spectrum(vna = vna1)
m.set_x_parameters(arange(-0.05,0.05,0.01),'flux coil current',coil.set_current, unit = 'mA')
m.set_y_parameters(arange(4e9,7e9,10e6),'excitation frequency',mw_src1.set_frequency, unit = 'Hz')
m.gen_fit_function(...) several times
m.measure_XX()
'''
def __init__(self, IV_Device, exp_name = '', sample = None):
self.IVD = IV_Device
self.exp_name = exp_name
self._sample = sample
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = True
self._plot_comment=""
self.set_log_function()
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'transport'
self._measurement_object.sample = self._sample
self._qvk_process = False
self.number_of_timetraces = 1 #relevant in time domain mode
self._web_visible = True
self.sweep = self.sweeps()
self._Fraunhofer = True
def add_sweep_4quadrants(self, start, stop, step, offset=0):
self.sweep.add_sweep(start+offset, stop+offset, step)
self.sweep.add_sweep(stop+offset, start+offset, -step)
self.sweep.add_sweep(start+offset, -stop+offset, -step)
self.sweep.add_sweep(-stop+offset, start+offset, step)
def set_log_function(self, func=None, name = None, unit = None, log_dtype = None):
'''
A function (object) can be passed to the measurement loop which is excecuted before every x iteration
but after executing the x_object setter in 2D measurements and before every line (but after setting
the x value) in 3D measurements.
The return value of the function of type float or similar is stored in a value vector in the h5 file.
Call without any arguments to delete all log functions. The timestamp is automatically saved.
func: function object in list form
name: name of logging parameter appearing in h5 file, default: 'log_param'
unit: unit of logging parameter, default: ''
log_dtype: h5 data type, default: 'f' (float32)
'''
if name == None:
try:
name = ['log_param']*len(func)
except Exception:
name = None
if unit == None:
try:
unit = ['']*len(func)
except Exception:
unit = None
if log_dtype == None:
try:
log_dtype = ['f']*len(func)
except Exception:
log_dtype = None
self.log_function = []
self.log_name = []
self.log_unit = []
self.log_dtype = []
if func != None:
for i,f in enumerate(func):
self.log_function.append(f)
self.log_name.append(name[i])
self.log_unit.append(unit[i])
self.log_dtype.append(log_dtype[i])
def set_x_parameters(self, x_vec, x_coordname, x_set_obj, x_unit = ""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
x_vec (array): conains the sweeping values
x_coordname (string)
x_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
x_unit (string): optional
'''
self.x_vec = x_vec
self.x_coordname = x_coordname
self.x_set_obj = x_set_obj
#self.delete_fit_function()
self.x_unit = x_unit
def set_y_parameters(self, y_vec, y_coordname, y_set_obj, y_unit = ""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
y_vec (array): contains the sweeping values
y_coordname (string)
y_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
y_unit (string): optional
'''
self.y_vec = y_vec
self.y_coordname = y_coordname
self.y_set_obj = y_set_obj
self.delete_fit_function()
self.y_unit = y_unit
def set_web_visible(self, web_visible = True):
'''
Sets the web_visible parameter for the measurement class
Input:
web_visible = True (Default) | False
'''
self._web_visible = web_visible
def set_sweep_type(self, sweep_type = 1):
'''
# FIXME: HR this should go into the IVD driver
Sets the sweep type, in the moment only simple sweep types are defined:
Input:
sweep_type:
0: single sweep START -> END
1: double sweep START -> END -> START (default)
2: triple sweep START -> END -> START -> -END
3: quad sweep START -> END -> START -> -END -> START
...
'''
# define the number of datasets for each sweep type
self.IV_sweep_types = { 0:1 , 1:2, 2:3, 3:4 }
self.IV_sweep_type = sweep_type
def get_sweep_type(self):
return self.IV_sweep_type
def get_num_ds_from_sweep_type(self,sweep_type):
# should be self.IVD.IV_sweep_types[sweep_type]
return self.IV_sweep_types[sweep_type]
def _prepare_measurement_IVD(self):
'''
all the relevant settings from the vna are updated and called
'''
self.IVD.get_all()
#ttip.get_temperature()
# bias mode is either current=0 or voltage=1
self._bias_mode = self.IVD.get_bias_mode()
#self._nop = self.IVD.get_nop()
#self._sweeptime_averages = self.IVD.get_sweeptime_averages()
#self._freqpoints = self.IVD.get_freqpoints()
#if self.averaging_start_ready: self.vna.pre_measurement()
def _prepare_measurement_file(self):
'''
creates the output .h5-file with distinct dataset structures for each measurement type.
at this point all measurement parameters are known and put in the output file
'''
print ('filename '+self._file_name)
self._data_file = hdf.Data(name=self._file_name)
self._measurement_object.uuid = self._data_file._uuid
self._measurement_object.hdf_relpath = self._data_file._relpath
self._measurement_object.instruments = qt.instruments.get_instruments()
#self._measurement_object.save()
self._mo = self._data_file.add_textlist('measurement')
self._mo.append(self._measurement_object.get_JSON())
# write logfile and instrument settings
#self._write_settings_dataset()
#self._log = waf.open_log_file(self._data_file.get_filepath())
#if not self._scan_time:
# self._data_freq = self._data_file.add_coordinate('frequency', unit = 'Hz')
# self._data_freq.add(self._freqpoints)
self._data_I = []
self._data_V = []
#self._data_dVdI = []
if self._scan_1D:
if self._bias_mode:# current bias
#self._data_freq = self._data_file.add_coordinate('frequency', unit = 'Hz')
for st in range(self.sweep.get_nos()):
self._data_V.append(self._data_file.add_value_vector('V_'+str(st), unit = 'V', save_timestamp = False))
self._data_I.append(self._data_file.add_value_vector('I_'+str(st), x = self._data_V[st], unit = 'A', save_timestamp = False))
#self._data_dVdI.append(self._data_file.add_value_vector('_data_dVdI_'+str(st), x = self._data_V[st], unit = 'V/A', save_timestamp = False))
IV = self._data_file.add_view('IV', x = self._data_V[0], y = self._data_I[0])
#dVdI = self._data_file.add_view('dVdI', x = self._data_I[0] , y = self._data_dVdI[0])
for i in range(1, self.sweep.get_nos()):
IV.add(x=self._data_V[i],y=self._data_I[i])
#dVdI.add(x=self._data_I[i],y=self._data_dVdI[i])
if self._scan_2D:
self._data_x = self._data_file.add_coordinate(self.x_coordname, unit = self.x_unit)
self._data_x.add(self.x_vec)
for st in range(self.sweep.get_nos()):
self._data_I.append(self._data_file.add_value_vector('I_'+str(st), unit = 'A', save_timestamp = False))
self._data_V.append(self._data_file.add_value_matrix('V_'+str(st), x = self._data_x, y = self._data_I[st], unit = 'V', save_timestamp = False))
#self._data_dVdI.append(self._data_file.add_value_matrix('dVdI_'+str(st), x = self._data_x, y = self._data_I[st], unit = 'V/A', save_timestamp = False))
if self._Fraunhofer:
self._data_Ic = []
for st in range(self.sweep.get_nos()):
self._data_Ic.append(self._data_file.add_value_vector('Ic_'+str(st), x = self._data_x, unit = 'A', save_timestamp = False))
Fraunhofer = self._data_file.add_view('Fraunhofer', x=self._data_x, y=self._data_Ic[0])
for i in range(1, self.sweep.get_nos()):
Fraunhofer.add(x=self._data_x, y=self._data_Ic[i])
#if self.log_function != None: #use logging
# self._log_value = []
# for i in range(len(self.log_function)):
# self._log_value.append(self._data_file.add_value_vector(self.log_name[i], x = self._data_x, unit = self.log_unit[i], dtype=self.log_dtype[i]))
if self._scan_3D:
self._data_x = self._data_file.add_coordinate(self.x_coordname, unit = self.x_unit)
self._data_x.add(self.x_vec)
self._data_y = self._data_file.add_coordinate(self.y_coordname, unit = self.y_unit)
self._data_y.add(self.y_vec)
if self._nop == 0: #saving in a 2D matrix instead of a 3D box HR: does not work yet !!! test things before you put them online.
self._data_amp = self._data_file.add_value_matrix('amplitude', x = self._data_x, y = self._data_y, unit = 'arb. unit', save_timestamp = False)
self._data_pha = self._data_file.add_value_matrix('phase', x = self._data_x, y = self._data_y, unit = 'rad', save_timestamp = False)
else:
self._data_amp = self._data_file.add_value_box('amplitude', x = self._data_x, y = self._data_y, z = self._data_freq, unit = 'arb. unit', save_timestamp = False)
self._data_pha = self._data_file.add_value_box('phase', x = self._data_x, y = self._data_y, z = self._data_freq, unit = 'rad', save_timestamp = False)
if self.log_function != None: #use logging
self._log_value = []
for i in range(len(self.log_function)):
self._log_value.append(self._data_file.add_value_vector(self.log_name[i], x = self._data_x, unit = self.log_unit[i], dtype=self.log_dtype[i]))
if self.comment:
self._data_file.add_comment(self.comment)
if self.qviewkit_singleInstance and self.open_qviewkit and self._qvk_process:
self._qvk_process.terminate() #terminate an old qviewkit instance
def _write_settings_dataset(self):
self._settings = self._data_file.add_textlist('settings')
settings = waf.get_instrument_settings(self._data_file.get_filepath())
self._settings.append(settings)
def _wait_progress_bar(self):
ti = time()
if self.progress_bar:
self._p = Progress_Bar(self.IVD.get_averages(),self.dirname,self.IVD.get_sweeptime())
qt.msleep(.2)
# wait for data
while not self.IVD.ready():
if time()-ti > self.IVD.get_sweeptime(query=False):
if self.progress_bar: self._p.iterate()
ti = time()
qt.msleep(.2)
if self.progress_bar:
while self._p.progr < self._p.max_it:
self._p.iterate()
def measure_1D(self, sweep_type=1):
'''
measure method to record a single (averaged) VNA trace, S11 or S21 according to the setting on the VNA
rescan: If True (default), the averages on the VNA are cleared and a new measurement is started.
If False, it will directly take the data from the VNA without waiting.
'''
self._sweep_type = sweep_type
self._scan_1D = True
self._scan_2D = False
self._scan_3D = False
self._scan_time = False
self._measurement_object.measurement_func = 'measure_1D'
self._measurement_object.x_axis = 'frequency'
self._measurement_object.y_axis = ''
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = self._web_visible
if not self.dirname:
self.dirname = 'IVD_tracedata'
self._file_name = self.dirname.replace(' ', '').replace(',','_')
if self.exp_name:
self._file_name += '_' + self.exp_name
# prepare storage
self._prepare_measurement_IVD()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['I_0', 'V_0'])
print('recording trace...')
sys.stdout.flush()
qt.mstart()
self.sweep.create_iterator()
self.IVD.set_status(True)
for st in range(self.sweep.get_nos()):
#print st
self.IVD.set_sweep_parameters(self.sweep.get_sweep())
data_bias, data_sense = self.IVD.take_IV()
self._data_I[st].append(data_bias)
self._data_V[st].append(data_sense)
#self._data_dVdI[st].append(np.gradient(self._data_V[st])/np.gradient(self._data_I[st]))
self.IVD.set_status(False)
qt.mend()
self._end_measurement()
def measure_2D(self):
'''
measure method to record a (averaged) VNA trace, S11 or S21 according to the setting on the VNA
for all parameters x_vec in x_obj
'''
if not self.x_set_obj:
logging.error('axes parameters not properly set...aborting')
return
self._scan_1D = False
self._scan_2D = True
self._scan_3D = False
self._measurement_object.measurement_func = 'measure_2D'
self._measurement_object.x_axis = self.x_coordname
self._measurement_object.y_axis = 'current'
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = self._web_visible
if not self.dirname:
self.dirname = self.x_coordname
self._file_name = '2D_' + self.dirname.replace(' ', '').replace(',','_')
if self.exp_name:
self._file_name += '_' + self.exp_name
#if self.progress_bar: self._p = Progress_Bar(len(self.x_vec),'2D VNA sweep '+self.dirname,self.vna.get_sweeptime_averages())
self._prepare_measurement_IVD()
self._prepare_measurement_file()
'''opens qviewkit to plot measurement, amp and pha are opened by default'''
if self.open_qviewkit: self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['I_0', 'V_0'])
self._measure()
#
#
# def measure_3D(self):
# '''
# measure full window of vna while sweeping x_set_obj and y_set_obj with parameters x_vec/y_vec. sweep over y_set_obj is the inner loop, for every value x_vec[i] all values y_vec are measured.
#
# optional: measure method to perform the measurement according to landscape, if set
# self.span is the range (in units of the vertical plot axis) data is taken around the specified funtion(s)
# note: make sure to have properly set x,y vectors before generating traces
# '''
# if not self.x_set_obj or not self.y_set_obj:
# logging.error('axes parameters not properly set...aborting')
# return
# self._scan_1D = False
# self._scan_2D = False
# self._scan_3D = True
# self._scan_time = False
#
# self._measurement_object.measurement_func = 'measure_3D'
# self._measurement_object.x_axis = self.x_coordname
# self._measurement_object.y_axis = self.y_coordname
# self._measurement_object.z_axis = 'frequency'
# self._measurement_object.web_visible = self._web_visible
#
# if not self.dirname:
# self.dirname = self.x_coordname + ', ' + self.y_coordname
# self._file_name = '3D_' + self.dirname.replace(' ', '').replace(',','_')
# if self.exp_name:
# self._file_name += '_' + self.exp_name
#
# if self.progress_bar: self._p = Progress_Bar(len(self.x_vec)*len(self.y_vec),'3D VNA sweep '+self.dirname,self.vna.get_sweeptime_averages())
#
# self._prepare_measurement_vna()
# self._prepare_measurement_file()
# '''opens qviewkit to plot measurement, amp and pha are opened by default'''
# '''only middle point in freq array is plotted vs x and y'''
# if self.open_qviewkit: self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['amplitude', 'phase'])
# if self._fit_resonator:
# self._resonator = resonator(self._data_file.get_filepath())
#
# if self.landscape:
# self.center_freqs = np.array(self.landscape).T
# else:
# self.center_freqs = [] #load default sequence
# for i in range(len(self.x_vec)):
# self.center_freqs.append([0])
#
# self._measure()
def _measure(self):
'''
measures and plots the data depending on the measurement type.
the measurement loops feature the setting of the objects and saving the data in the .h5 file.
'''
qt.mstart()
try:
"""
loop: x_obj with parameters from x_vec
"""
self.IVD.set_status(True)
for ix, x in enumerate(self.x_vec):
self.x_set_obj(x)
sleep(1)
#if self.log_function != None:
# for i,f in enumerate(self.log_function):
# self._log_value[i].append(float(f()))
if self._scan_2D:
""" measurement """
self.sweep.create_iterator()
for st in range(self.sweep.get_nos()):
self.IVD.set_sweep_parameters(self.sweep.get_sweep())
data_bias, data_sense = self.IVD.take_IV(channel=1)
self._data_I[st].add(data_bias)
self._data_V[st].append(data_sense)
#self._data_dVdI[st].append(np.array(np.gradient(self._data_V[st]))[-1]/np.gradient(self._data_I[st]))
if self._Fraunhofer:
self._IVC = IV_curve()
self._data_Ic[st].append(self._IVC.get_Ic(V=data_sense, I=data_bias, direction=self.IVD._direction))
#if self.progress_bar:
# self._p.iterate()
qt.msleep()
self.IVD.set_status(False)
except Exception as e:
print e.__doc__
print e.message
finally:
self._end_measurement()
self.IVD.set_status(False, 1)
#self.IVD.ramp_current(0, 100e-6, channel=2)
self.IVD.set_status(False, 2)
qt.mend()
def _end_measurement(self):
'''
the data file is closed and filepath is printed
'''
print self._data_file.get_filepath()
#qviewkit.save_plots(self._data_file.get_filepath(),comment=self._plot_comment) #old version where we have to wait for the plots
t = threading.Thread(target=qviewkit.save_plots,args=[self._data_file.get_filepath(),self._plot_comment])
t.start()
self._data_file.close_file()
#waf.close_log_file(self._log)
self.dirname = None
def set_span(self, span):
self.span = span
def get_span(self):
return self.span
def set_tdx(self, tdx):
self.tdx = tdx
def set_tdy(self, tdy):
self.tdy = tdy
def get_tdx(self):
return self.tdx
def get_tdy(self):
return self.tdy
def f_parab(self,x,a,b,c):
return a*(x-b)**2+c
def f_hyp(self,x,a,b,c):
"hyperbolic function with the form y = sqrt[ a*(x-b)**2 + c ]"
return np.sqrt(a*(x-b)**2+c)
def set_plot_comment(self, comment):
'''
Small comment to add at the end of plot pics for more information i.e. good for wiki entries.
'''
self._plot_comment=comment
class sweeps(object):
def __init__(self, name='default'):
self._starts = []
self._stops = []
self._steps = []
self.create_iterator()
def create_iterator(self):
self._start_iter = iter(self._starts)
self._stop_iter = iter(self._stops)
self._step_iter = iter(self._steps)
def add_sweep(self, start, stop, step):
self._starts.append(start)
self._stops.append(stop)
self._steps.append(step)
def reset_sweeps(self):
self._starts = []
self._stops = []
self._stops = []
def get_sweep(self):
return (self._start_iter.next(),
self._stop_iter.next(),
self._step_iter.next())
def get_nos(self):
return len(self._starts)
def print_sweeps(self):
print(self._starts, self._stops, self._steps)
class spectrum(object):
'''
usage:
m = spectrum(vna = vna1)
m.set_x_parameters(arange(-0.05,0.05,0.01),'flux coil current',coil.set_current, unit = 'mA')
m.set_y_parameters(arange(4e9,7e9,10e6),'excitation frequency',mw_src1.set_frequency, unit = 'Hz')
m.gen_fit_function(...) several times
m.measure_XX()
'''
def __init__(self, IV_Device, exp_name = '', sample = None):
self.IVD = IV_Device
self.exp_name = exp_name
self._sample = sample
self.comment = ''
self.dirname = None
self.x_set_obj = None
self.y_set_obj = None
self.progress_bar = True
self._plot_comment=""
self.set_log_function()
self.open_qviewkit = True
self.qviewkit_singleInstance = False
self._measurement_object = Measurement()
self._measurement_object.measurement_type = 'transport'
self._measurement_object.sample = self._sample
self._qvk_process = False
self.number_of_timetraces = 1 #relevant in time domain mode
def set_log_function(self, func=None, name = None, unit = None, log_dtype = None):
'''
A function (object) can be passed to the measurement loop which is excecuted before every x iteration
but after executing the x_object setter in 2D measurements and before every line (but after setting
the x value) in 3D measurements.
The return value of the function of type float or similar is stored in a value vector in the h5 file.
Call without any arguments to delete all log functions. The timestamp is automatically saved.
func: function object in list form
name: name of logging parameter appearing in h5 file, default: 'log_param'
unit: unit of logging parameter, default: ''
log_dtype: h5 data type, default: 'f' (float32)
'''
if name == None:
try:
name = ['log_param']*len(func)
except Exception:
name = None
if unit == None:
try:
unit = ['']*len(func)
except Exception:
unit = None
if log_dtype == None:
try:
log_dtype = ['f']*len(func)
except Exception:
log_dtype = None
self.log_function = []
self.log_name = []
self.log_unit = []
self.log_dtype = []
if func != None:
for i,f in enumerate(func):
self.log_function.append(f)
self.log_name.append(name[i])
self.log_unit.append(unit[i])
self.log_dtype.append(log_dtype[i])
def set_x_parameters(self, x_vec, x_coordname, x_set_obj, x_unit = ""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
x_vec (array): conains the sweeping values
x_coordname (string)
x_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
x_unit (string): optional
'''
self.x_vec = x_vec
self.x_coordname = x_coordname
self.x_set_obj = x_set_obj
self.delete_fit_function()
self.x_unit = x_unit
def set_y_parameters(self, y_vec, y_coordname, y_set_obj, y_unit = ""):
'''
Sets parameters for sweep. In a 3D measurement, the x-parameters will be the "outer" sweep.
For every x value all y values are swept
Input:
y_vec (array): contains the sweeping values
y_coordname (string)
y_instrument (obj): callable object to execute with x_vec-values (i.e. vna.set_power())
y_unit (string): optional
'''
self.y_vec = y_vec
self.y_coordname = y_coordname
self.y_set_obj = y_set_obj
self.delete_fit_function()
self.y_unit = y_unit
def set_sweep_type(self, sweep_type = 1):
'''
Sets the sweep type, in the moment only simple sweep types are defined:
Input:
sweep_type:
0: single sweep START -> END
1: double sweep START -> END -> START (default)
2: triple sweep START -> END -> START -> -END
3: quad sweep START -> END -> START -> -END -> START
'''
self.IV_sweep_type = sweep_type
def _prepare_measurement_IVD(self):
'''
all the relevant settings from the vna are updated and called
'''
self.IVD.get_all()
#ttip.get_temperature()
# bias mode is either current=0 or voltage=1
self._bias_mode = self.IVD.get_bias_mode()
self._nop = self.IVD.get_nop()
self._sweeptime_averages = self.IVD.get_sweeptime_averages()
#self._freqpoints = self.IVD.get_freqpoints()
if self.averaging_start_ready: self.vna.pre_measurement()
def _prepare_measurement_file(self):
'''
creates the output .h5-file with distinct dataset structures for each measurement type.
at this point all measurement parameters are known and put in the output file
'''
self._data_file = hdf.Data(name=self._file_name)
self._measurement_object.uuid = self._data_file._uuid
self._measurement_object.hdf_relpath = self._data_file._relpath
self._measurement_object.instruments = qt.instruments.get_instruments()
self._measurement_object.save()
self._mo = self._data_file.add_textlist('measurement')
self._mo.append(self._measurement_object.get_JSON())
# write logfile and instrument settings
self._write_settings_dataset()
self._log = waf.open_log_file(self._data_file.get_filepath())
#if not self._scan_time:
# self._data_freq = self._data_file.add_coordinate('frequency', unit = 'Hz')
# self._data_freq.add(self._freqpoints)
if self._scan_1D:
if self._bias_mode:# current bias
#self._data_freq = self._data_file.add_coordinate('frequency', unit = 'Hz')
for st in range(self.sweep_type):
self._data_I[st] = self._data_file.add_value_vector('I_'+str(st), unit = 'A', save_timestamp = True)
self._data_V[st] = self._data_file.add_value_vector('V_'+str(st), x = self._data_I, unit = 'V', save_timestamp = True)
if self._scan_2D:
self._data_x = self._data_file.add_coordinate(self.x_coordname, unit = self.x_unit)
self._data_x.add(self.x_vec)
self._data_amp = self._data_file.add_value_matrix('amplitude', x = self._data_x, y = self._data_freq, unit = 'arb. unit', save_timestamp = True)
self._data_pha = self._data_file.add_value_matrix('phase', x = self._data_x, y = self._data_freq, unit='rad', save_timestamp = True)
if self.log_function != None: #use logging
self._log_value = []
for i in range(len(self.log_function)):
self._log_value.append(self._data_file.add_value_vector(self.log_name[i], x = self._data_x, unit = self.log_unit[i], dtype=self.log_dtype[i]))
if self._nop < 10:
"""creates view: plot middle point vs x-parameter, for qubit measurements"""
self._data_amp_mid = self._data_file.add_value_vector('amplitude_midpoint', unit = 'arb. unit', x = self._data_x, save_timestamp = True)
self._data_pha_mid = self._data_file.add_value_vector('phase_midpoint', unit = 'rad', x = self._data_x, save_timestamp = True)
#self._view = self._data_file.add_view("amplitude vs. " + self.x_coordname, x = self._data_x, y = self._data_amp[self._nop/2])
if self._scan_3D:
self._data_x = self._data_file.add_coordinate(self.x_coordname, unit = self.x_unit)
self._data_x.add(self.x_vec)
self._data_y = self._data_file.add_coordinate(self.y_coordname, unit = self.y_unit)
self._data_y.add(self.y_vec)
if self._nop == 0: #saving in a 2D matrix instead of a 3D box HR: does not work yet !!! test things before you put them online.
self._data_amp = self._data_file.add_value_matrix('amplitude', x = self._data_x, y = self._data_y, unit = 'arb. unit', save_timestamp = False)
self._data_pha = self._data_file.add_value_matrix('phase', x = self._data_x, y = self._data_y, unit = 'rad', save_timestamp = False)
else:
self._data_amp = self._data_file.add_value_box('amplitude', x = self._data_x, y = self._data_y, z = self._data_freq, unit = 'arb. unit', save_timestamp = False)
self._data_pha = self._data_file.add_value_box('phase', x = self._data_x, y = self._data_y, z = self._data_freq, unit = 'rad', save_timestamp = False)
if self.log_function != None: #use logging
self._log_value = []
for i in range(len(self.log_function)):
self._log_value.append(self._data_file.add_value_vector(self.log_name[i], x = self._data_x, unit = self.log_unit[i], dtype=self.log_dtype[i]))
if self._scan_time:
self._data_freq = self._data_file.add_coordinate('frequency', unit = 'Hz')
self._data_freq.add([self.vna.get_centerfreq()])
self._data_time = self._data_file.add_coordinate('time', unit = 's')
self._data_time.add(np.arange(0,self._nop,1)*self.vna.get_sweeptime()/(self._nop-1))
self._data_x = self._data_file.add_coordinate('trace_number', unit = '')
self._data_x.add(np.arange(0, self.number_of_timetraces, 1))
self._data_amp = self._data_file.add_value_matrix('amplitude', x = self._data_x, y = self._data_time, unit = 'lin. mag.', save_timestamp = False)
self._data_pha = self._data_file.add_value_matrix('phase', x = self._data_x, y = self._data_time, unit = 'rad.', save_timestamp = False)
if self.comment:
self._data_file.add_comment(self.comment)
if self.qviewkit_singleInstance and self.open_qviewkit and self._qvk_process:
self._qvk_process.terminate() #terminate an old qviewkit instance
def _write_settings_dataset(self):
self._settings = self._data_file.add_textlist('settings')
settings = waf.get_instrument_settings(self._data_file.get_filepath())
self._settings.append(settings)
def measure_1D(self, rescan = True, web_visible = True):
'''
measure method to record a single (averaged) VNA trace, S11 or S21 according to the setting on the VNA
rescan: If True (default), the averages on the VNA are cleared and a new measurement is started.
If False, it will directly take the data from the VNA without waiting.
'''
self._scan_1D = True
self._scan_2D = False
self._scan_3D = False
self._scan_time = False
self._measurement_object.measurement_func = 'measure_1D'
self._measurement_object.x_axis = 'frequency'
self._measurement_object.y_axis = ''
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = 'IVD_tracedata'
self._file_name = self.dirname.replace(' ', '').replace(',','_')
if self.exp_name:
self._file_name += '_' + self.exp_name
# prepare storage
self._prepare_measurement_IVD()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
if self.open_qviewkit:
self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['I_0', 'V_0'])
print('recording trace...')
sys.stdout.flush()
qt.mstart()
if rescan:
if self.averaging_start_ready:
self.vna.start_measurement()
ti = time()
if self.progress_bar: self._p = Progress_Bar(self.vna.get_averages(),self.dirname,self.vna.get_sweeptime())
qt.msleep(.2)
while not self.vna.ready():
if time()-ti > self.vna.get_sweeptime(query=False):
if self.progress_bar: self._p.iterate()
ti = time()
qt.msleep(.2)
if self.progress_bar:
while self._p.progr < self._p.max_it:
self._p.iterate()
else:
self.vna.avg_clear()
if self.vna.get_averages() == 1 or self.vna.get_Average() == False: #no averaging
if self.progress_bar:self._p = Progress_Bar(1,self.dirname,self.vna.get_sweeptime())
qt.msleep(self.vna.get_sweeptime()) #wait single sweep
if self.progress_bar: self._p.iterate()
else: #with averaging
if self.progress_bar: self._p = Progress_Bar(self.vna.get_averages(),self.dirname,self.vna.get_sweeptime())
if "avg_status" in self.vna.get_function_names():
for a in range(self.vna.get_averages()):
while self.vna.avg_status() <= a:
qt.msleep(.2) #maybe one would like to adjust this at a later point
if self.progress_bar: self._p.iterate()
else: #old style
for a in range(self.vna.get_averages()):
qt.msleep(self.vna.get_sweeptime()) #wait single sweep time
if self.progress_bar: self._p.iterate()
data_amp, data_pha = self.vna.get_tracedata()
data_real, data_imag = self.vna.get_tracedata('RealImag')
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
self._data_real.append(data_real)
self._data_imag.append(data_imag)
if self._fit_resonator:
self._do_fit_resonator()
qt.mend()
self._end_measurement()
"""
def measure_2D(self, web_visible = True):
'''
measure method to record a (averaged) VNA trace, S11 or S21 according to the setting on the VNA
for all parameters x_vec in x_obj
'''
if not self.x_set_obj:
logging.error('axes parameters not properly set...aborting')
return
self._scan_1D = False
self._scan_2D = True
self._scan_3D = False
self._scan_time = False
self._measurement_object.measurement_func = 'measure_2D'
self._measurement_object.x_axis = self.x_coordname
self._measurement_object.y_axis = 'frequency'
self._measurement_object.z_axis = ''
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = self.x_coordname
self._file_name = '2D_' + self.dirname.replace(' ', '').replace(',','_')
if self.exp_name:
self._file_name += '_' + self.exp_name
if self.progress_bar: self._p = Progress_Bar(len(self.x_vec),'2D VNA sweep '+self.dirname,self.vna.get_sweeptime_averages())
self._prepare_measurement_vna()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
if self._nop < 10:
if self.open_qviewkit: self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['amplitude_midpoint', 'phase_midpoint'])
else:
if self.open_qviewkit: self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['amplitude', 'phase'])
if self._fit_resonator:
self._resonator = resonator(self._data_file.get_filepath())
self._measure()
def measure_3D(self, web_visible = True):
'''
measure full window of vna while sweeping x_set_obj and y_set_obj with parameters x_vec/y_vec. sweep over y_set_obj is the inner loop, for every value x_vec[i] all values y_vec are measured.
optional: measure method to perform the measurement according to landscape, if set
self.span is the range (in units of the vertical plot axis) data is taken around the specified funtion(s)
note: make sure to have properly set x,y vectors before generating traces
'''
if not self.x_set_obj or not self.y_set_obj:
logging.error('axes parameters not properly set...aborting')
return
self._scan_1D = False
self._scan_2D = False
self._scan_3D = True
self._scan_time = False
self._measurement_object.measurement_func = 'measure_3D'
self._measurement_object.x_axis = self.x_coordname
self._measurement_object.y_axis = self.y_coordname
self._measurement_object.z_axis = 'frequency'
self._measurement_object.web_visible = web_visible
if not self.dirname:
self.dirname = self.x_coordname + ', ' + self.y_coordname
self._file_name = '3D_' + self.dirname.replace(' ', '').replace(',','_')
if self.exp_name:
self._file_name += '_' + self.exp_name
if self.progress_bar: self._p = Progress_Bar(len(self.x_vec)*len(self.y_vec),'3D VNA sweep '+self.dirname,self.vna.get_sweeptime_averages())
self._prepare_measurement_vna()
self._prepare_measurement_file()
"""opens qviewkit to plot measurement, amp and pha are opened by default"""
"""only middle point in freq array is plotted vs x and y"""
if self.open_qviewkit: self._qvk_process = qviewkit.plot(self._data_file.get_filepath(), datasets=['amplitude', 'phase'])
if self._fit_resonator:
self._resonator = resonator(self._data_file.get_filepath())
if self.landscape:
self.center_freqs = np.array(self.landscape).T
else:
self.center_freqs = [] #load default sequence
for i in range(len(self.x_vec)):
self.center_freqs.append([0])
self._measure()
"""
def _measure(self):
'''
measures and plots the data depending on the measurement type.
the measurement loops feature the setting of the objects and saving the data in the .h5 file.
'''
qt.mstart()
try:
"""
loop: x_obj with parameters from x_vec
"""
for ix, x in enumerate(self.x_vec):
self.x_set_obj(x)
sleep(self.tdx)
if self.log_function != None:
for i,f in enumerate(self.log_function):
self._log_value[i].append(float(f()))
if self._scan_3D:
for y in self.y_vec:
"""
loop: y_obj with parameters from y_vec (only 3D measurement)
"""
if (np.min(np.abs(self.center_freqs[ix]-y*np.ones(len(self.center_freqs[ix])))) > self.span/2.) and self.landscape: #if point is not of interest (not close to one of the functions)
data_amp = np.zeros(int(self._nop))
data_pha = np.zeros(int(self._nop)) #fill with zeros
else:
self.y_set_obj(y)
sleep(self.tdy)
if self.averaging_start_ready:
self.vna.start_measurement()
qt.msleep(.2) #just to make sure, the ready command does not *still* show ready
while not self.vna.ready():
qt.msleep(.2)
else:
self.vna.avg_clear()
qt.msleep(self._sweeptime_averages)
#if "avg_status" in self.vna.get_function_names():
# while self.vna.avg_status() < self.vna.get_averages():
# qt.msleep(.2) #maybe one would like to adjust this at a later point
""" measurement """
data_amp, data_pha = self.vna.get_tracedata()
if self._nop == 0: # this does not work yet.
print data_amp[0], data_amp, self._nop
self._data_amp.append(data_amp[0])
self._data_pha.append(data_pha[0])
else:
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
if self._fit_resonator:
self._do_fit_resonator()
if self.progress_bar:
self._p.iterate()
qt.msleep()
"""
filling of value-box is done here.
after every y-loop the data is stored the next 2d structure
"""
self._data_amp.next_matrix()
self._data_pha.next_matrix()
if self._scan_2D:
if self.averaging_start_ready:
self.vna.start_measurement()
qt.msleep(.2) #just to make sure, the ready command does not *still* show ready
while not self.vna.ready():
qt.msleep(.2)
else:
self.vna.avg_clear()
qt.msleep(self._sweeptime_averages)
""" measurement """
data_amp, data_pha = self.vna.get_tracedata()
self._data_amp.append(data_amp)
self._data_pha.append(data_pha)
if self._nop < 10:
#print data_amp[self._nop/2]
self._data_amp_mid.append(float(data_amp[self._nop/2]))
self._data_pha_mid.append(float(data_pha[self._nop/2]))
if self._fit_resonator:
self._do_fit_resonator()
if self.progress_bar:
self._p.iterate()
qt.msleep()
except Exception as e:
print e.__doc__
print e.message
finally:
self._end_measurement()
qt.mend()
def _end_measurement(self):
'''
the data file is closed and filepath is printed
'''
print self._data_file.get_filepath()
#qviewkit.save_plots(self._data_file.get_filepath(),comment=self._plot_comment) #old version where we have to wait for the plots
t = threading.Thread(target=qviewkit.save_plots,args=[self._data_file.get_filepath(),self._plot_comment])
t.start()
self._data_file.close_file()
waf.close_log_file(self._log)
self.dirname = None
def set_span(self, span):
self.span = span
def get_span(self):
return self.span
def set_tdx(self, tdx):
self.tdx = tdx
def set_tdy(self, tdy):
self.tdy = tdy
def get_tdx(self):
return self.tdx
def get_tdy(self):
return self.tdy
def f_parab(self,x,a,b,c):
return a*(x-b)**2+c
def f_hyp(self,x,a,b,c):
"hyperbolic function with the form y = sqrt[ a*(x-b)**2 + c ]"
return np.sqrt(a*(x-b)**2+c)
def set_plot_comment(self, comment):
'''
Small comment to add at the end of plot pics for more information i.e. good for wiki entries.
'''
self._plot_comment=comment