def test_policy_hostaddr_ipv6_wildcard(self):
if not is_ipv6_enabled():
self.skipTest("System IPv6 support is not available")
aaa = HostAddr("*")
self.check_hostaddr_match(aaa,"::0")
self.check_hostaddr_match(aaa,"::1")
self.check_hostaddr_match(aaa,"ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff")
def test_simple_pre_settled(self):
if not is_ipv6_enabled():
return self.skipTest("Skipping test..IPV6 not enabled")
addr = self.routers[0].addresses[4] + "/test/1"
M1 = self.messenger()
M2 = self.messenger()
M1.start()
M2.start()
M2.subscribe(addr)
tm = Message()
rm = Message()
tm.address = addr
for i in range(100):
tm.body = {'number': i}
M1.put(tm)
M1.send()
for i in range(100):
M2.recv(1)
M2.get(rm)
self.assertEqual(i, rm.body['number'])
M1.stop()
M2.stop()
def test_policy_hostaddr_ipv6_wildcard(self):
if not is_ipv6_enabled():
self.skipTest("System IPv6 support is not available")
aaa = HostAddr("*")
self.check_hostaddr_match(aaa,"::0")
self.check_hostaddr_match(aaa,"::1")
self.check_hostaddr_match(aaa,"ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff")
def setUpClass(cls):
"""Start the router"""
super(LoadPolicyFromFolder, cls).setUpClass()
ipv6_enabled = is_ipv6_enabled()
policy_config_path = os.path.join(DIR, 'policy-1')
replacements = {'{IPV6_LOOPBACK}': ', ::1'}
for f in os.listdir(policy_config_path):
if f.endswith(".json.in"):
with open(policy_config_path + "/" + f[:-3], 'w') as outfile:
with open(policy_config_path + "/" + f) as infile:
for line in infile:
for src, target in replacements.iteritems():
if ipv6_enabled:
line = line.replace(src, target)
else:
line = line.replace(src, '')
outfile.write(line)
config = Qdrouterd.Config([('router', {
'mode': 'standalone',
'id': 'QDR.Policy'
}), ('listener', {
'port': cls.tester.get_port()
}),
('policy', {
'maxConnections': 2,
'policyDir': policy_config_path,
'enableVhostPolicy': 'true'
})])
cls.router = cls.tester.qdrouterd('conn-limit-router',
config,
wait=True)
def test_simple_send_receive(self):
if not is_ipv6_enabled():
return self.skipTest("Skipping test..IPV6 not enabled")
simple_send_receive_test = SimpleSndRecv(self.routers[0].addresses[4])
simple_send_receive_test.run()
self.assertTrue(simple_send_receive_test.message_received)
def test_simple_send_receive(self):
if not is_ipv6_enabled():
return self.skipTest("Skipping test..IPV6 not enabled")
simple_send_receive_test = SimpleSndRecv(self.routers[0].addresses[4])
simple_send_receive_test.run()
self.assertTrue(simple_send_receive_test.message_received)
def test_policy_hostaddr_ipv6(self):
if not is_ipv6_enabled():
self.skipTest("System IPv6 support is not available")
# Create simple host and range
aaa = HostAddr("::1")
bbb = HostAddr("::1,::ffff")
ccc = HostAddr("ffff::0,ffff:ffff::0")
# Verify host and range
self.check_hostaddr_match(aaa, "::1")
self.check_hostaddr_match(aaa, "::2", False)
self.check_hostaddr_match(aaa, "ffff:ffff::0", False)
self.check_hostaddr_match(bbb, "::1")
self.check_hostaddr_match(bbb, "::fffe")
self.check_hostaddr_match(bbb, "::1:0", False)
self.check_hostaddr_match(bbb, "ffff::0", False)
self.check_hostaddr_match(ccc, "ffff::1")
self.check_hostaddr_match(ccc, "ffff:fffe:ffff:ffff::ffff")
self.check_hostaddr_match(ccc, "ffff:ffff::1", False)
self.check_hostaddr_match(ccc, "ffff:ffff:ffff:ffff::ffff", False)
def test_policy_hostaddr_ipv6(self):
if not is_ipv6_enabled():
self.skipTest("System IPv6 support is not available")
# Create simple host and range
aaa = HostAddr("::1")
bbb = HostAddr("::1,::ffff")
ccc = HostAddr("ffff::0,ffff:ffff::0")
# Verify host and range
self.check_hostaddr_match(aaa, "::1")
self.check_hostaddr_match(aaa, "::2", False)
self.check_hostaddr_match(aaa, "ffff:ffff::0", False)
self.check_hostaddr_match(bbb, "::1")
self.check_hostaddr_match(bbb, "::fffe")
self.check_hostaddr_match(bbb, "::1:0", False)
self.check_hostaddr_match(bbb, "ffff::0", False)
self.check_hostaddr_match(ccc, "ffff::1")
self.check_hostaddr_match(ccc, "ffff:fffe:ffff:ffff::ffff")
self.check_hostaddr_match(ccc, "ffff:ffff::1", False)
self.check_hostaddr_match(ccc, "ffff:ffff:ffff:ffff::ffff", False)
def setUpClass(cls):
"""
Starts three routers with various listeners and connectors.
There is a call to wait_router_connected to make sure that the routers are able to communicate with each
other on ports using the assigned protocol family.
"""
super(ProtocolFamilyTest, cls).setUpClass()
def router(name, connection):
config = [
('router', {
'mode': 'interior',
'id': 'QDR.%s' % name
}),
# No protocolFamily is specified for this listener.
# This will test if the router defaults host to 127.0.0.1 and if the router auto-detects protocol family
('listener', {
'port': cls.tester.get_port()
}),
# Specify host as 127.0.0.1 and protocol family as IPv4
('listener', {
'host': '127.0.0.1',
'protocolFamily': 'IPv4',
'port': cls.tester.get_port()
}),
# Specify protocol family as IPv4 but don't specify any host
# This will test if the router defaults the host field to 127.0.0.1
('listener', {
'protocolFamily': 'IPv4',
'port': cls.tester.get_port()
}),
# Specify the host as 127.0.0.1
# This will test router's auto-detection of protocol family
('listener', {
'host': '127.0.0.1',
'port': cls.tester.get_port()
}),
# Specify host as ::1 and protocol family as IPv6
('listener', {
'host': '::1',
'protocolFamily': 'IPv6',
'port': cls.tester.get_port(protocol_family='IPv6')
}),
] + connection
config = Qdrouterd.Config(config)
# The wait=True attempts to connect to each listening port with the appropriate protocol family
# and tests each connector
cls.routers.append(cls.tester.qdrouterd(name, config, wait=True))
if not is_ipv6_enabled():
return
cls.routers = []
inter_router_port = cls.tester.get_port(protocol_family='IPv6')
inter_router_ipv4_port = cls.tester.get_port(protocol_family='IPv4')
router('A', [('listener', {
'host': '::1',
'role': 'inter-router',
'protocolFamily': 'IPv6',
'port': inter_router_port
})])
router(
'B',
[
# Tests an IPv6 connector
('connector', {
'host': '::1',
'role': 'inter-router',
'protocolFamily': 'IPv6',
'port': inter_router_port
}),
('listener', {
'host': '127.0.0.1',
'role': 'inter-router',
'port': inter_router_ipv4_port
})
])
router(
'C',
[
# Tests an IPv4 connector
('connector', {
'host': '127.0.0.1',
'role': 'inter-router',
'port': inter_router_ipv4_port
})
])
cls.routers[0].wait_router_connected('QDR.B')
cls.routers[1].wait_router_connected('QDR.A')
cls.routers[2].wait_router_connected('QDR.B')
def test_policy_malformed_hostaddr_ipv6(self):
if not is_ipv6_enabled():
self.skipTest("System IPv6 support is not available")
self.expect_deny("1::2::3", "Name or service not known")
self.expect_deny("::1,::2,::3", "arg count")
self.expect_deny("0:ff:0,0:fe:ffff:ffff::0", "a > b")
def setUpClass(cls):
"""
Starts three routers with various listeners and connectors.
There is a call to wait_router_connected to make sure that the routers are able to communicate with each
other on ports using the assigned protocol family.
"""
super(ProtocolFamilyTest, cls).setUpClass()
def router(name, connection):
config = [
('router', {'mode': 'interior', 'id': 'QDR.%s'%name}),
# No protocolFamily is specified for this listener.
# This will test if the router defaults host to 127.0.0.1 and if the router auto-detects protocol family
('listener', {'port': cls.tester.get_port()}),
# Specify host as 127.0.0.1 and protocol family as IPv4
('listener', {'host': '127.0.0.1', 'protocolFamily': 'IPv4','port': cls.tester.get_port()}),
# Specify protocol family as IPv4 but don't specify any host
# This will test if the router defaults the host field to 127.0.0.1
('listener', {'protocolFamily': 'IPv4', 'port': cls.tester.get_port()}),
# Specify the host as 127.0.0.1
# This will test router's auto-detection of protocol family
('listener', {'host': '127.0.0.1', 'port': cls.tester.get_port()}),
# Specify host as ::1 and protocol family as IPv6
('listener', {'host': '::1', 'protocolFamily': 'IPv6', 'port': cls.tester.get_port(protocol_family='IPv6')}),
] + connection
config = Qdrouterd.Config(config)
# The wait=True attempts to connect to each listening port with the appropriate protocol family
# and tests each connector
cls.routers.append(cls.tester.qdrouterd(name, config, wait=True))
if not is_ipv6_enabled():
return
cls.routers = []
inter_router_port = cls.tester.get_port(protocol_family='IPv6')
inter_router_ipv4_port = cls.tester.get_port(protocol_family='IPv4')
router('A',
[
('listener', {'host': '::1', 'role': 'inter-router', 'protocolFamily': 'IPv6', 'port': inter_router_port})
]
)
router('B',
[
# Tests an IPv6 connector
('connector', {'host': '::1', 'role': 'inter-router', 'protocolFamily': 'IPv6', 'port': inter_router_port}),
('listener', {'host': '127.0.0.1', 'role': 'inter-router', 'port': inter_router_ipv4_port})
]
)
router('C',
[
# Tests an IPv4 connector
('connector', {'host': '127.0.0.1', 'role': 'inter-router', 'port': inter_router_ipv4_port})
]
)
cls.routers[0].wait_router_connected('QDR.B')
cls.routers[1].wait_router_connected('QDR.A')
cls.routers[2].wait_router_connected('QDR.B')
def test_policy_malformed_hostaddr_ipv6(self):
if not is_ipv6_enabled():
self.skipTest("System IPv6 support is not available")
self.expect_deny( "1::2::3", "Name or service not known")
self.expect_deny( "::1,::2,::3", "arg count")
self.expect_deny( "0:ff:0,0:fe:ffff:ffff::0", "a > b")