def createEditor(self, parent, options, index):
self.update = True
node = index.internalPointer()
if isinstance(node, JsonItem):
if node.type in ('float', 'int'):
editor = QDoubleSpinBox(parent)
editor.setSuffix(node.unit or "")
editor.setRange(node.min or -sys.maxsize,
node.max or sys.maxsize)
editor.setGeometry(options.rect)
editor.setDecimals(node.decimals or 0)
editor.show()
return editor
else:
return super().createEditor(parent, options, index)
class DimensionMDE(Dimension):
binningChanged = Signal()
"""
MDEventWorkspace has additional properties for either number_of_bins or thickness
from mantidqt.widgets.sliceviewer.dimensionwidget import DimensionMDE
from qtpy.QtWidgets import QApplication
app = QApplication([])
window = DimensionMDE({'minimum':-1.1, 'number_of_bins':11, 'width':0.2, 'name':'Dim0', 'units':'A'})
window.show()
app.exec_()
"""
def __init__(self, dim_info, number=0, state=State.NONE, parent=None):
# hack in a number_of_bins for MDEventWorkspace
dim_info['number_of_bins'] = 1000
dim_info['width'] = (dim_info['maximum'] - dim_info['minimum']) / 1000
self.spinBins = QSpinBox()
self.spinBins.setRange(2, 9999)
self.spinBins.setValue(100)
self.spinBins.hide()
self.spinBins.setMinimumWidth(110)
self.spinThick = QDoubleSpinBox()
self.spinThick.setRange(0.001, 999)
self.spinThick.setValue(0.1)
self.spinThick.setSingleStep(0.1)
self.spinThick.setDecimals(3)
self.spinThick.setMinimumWidth(110)
self.rebinLabel = QLabel("thick")
self.rebinLabel.setMinimumWidth(44)
super().__init__(dim_info, number, state, parent)
self.spinBins.valueChanged.connect(self.binningChanged)
self.spinThick.valueChanged.connect(self.valueChanged)
self.layout.addWidget(self.spinBins)
self.layout.addWidget(self.spinThick)
self.layout.addWidget(self.rebinLabel)
def get_bins(self):
return int(self.spinBins.value())
def get_thickness(self):
return float(self.spinThick.value())
def set_state(self, state):
super().set_state(state)
if self.state == State.X:
self.spinBins.show()
self.spinThick.hide()
self.rebinLabel.setText('bins')
elif self.state == State.Y:
self.spinBins.show()
self.spinThick.hide()
self.rebinLabel.setText('bins')
elif self.state == State.NONE:
self.spinBins.hide()
self.spinThick.show()
self.rebinLabel.setText('thick')
else:
self.spinBins.hide()
self.spinThick.hide()
self.rebinLabel.hide()
class Dimension(QWidget):
stateChanged = Signal(int)
valueChanged = Signal()
"""
pass in dimension
state: one of (State.X, State.Y, State.NONE, State.DISABLE)
Can be run independently by:
from mantidqt.widgets.sliceviewer.dimensionwidget import Dimension
from qtpy.QtWidgets import QApplication
app = QApplication([])
window = Dimension({'minimum':-1.1, 'number_of_bins':11, 'width':0.2, 'name':'Dim0', 'units':'A'})
window.show()
app.exec_()
"""
def __init__(self, dim_info, number=0, state=State.NONE, parent=None):
super().__init__(parent)
self.minimum = dim_info['minimum']
self.nbins = dim_info['number_of_bins']
self.width = dim_info['width']
self.number = number
self.layout = QHBoxLayout(self)
self.name = QLabel(dim_info['name'])
self.units = QLabel(dim_info['units'])
self.x = QPushButton('X')
self.x.setFixedSize(32, 32)
self.x.setCheckable(True)
self.x.clicked.connect(self.x_clicked)
self.y = QPushButton('Y')
self.y.setFixedSize(32, 32)
self.y.setCheckable(True)
self.y.clicked.connect(self.y_clicked)
self.slider = QSlider(Qt.Horizontal)
self.slider.setRange(0, self.nbins - 1)
self.slider.valueChanged.connect(self.slider_changed)
self.spinbox = QDoubleSpinBox()
self.spinbox.setDecimals(3)
self.spinbox.setRange(self.get_bin_center(0),
self.get_bin_center(self.nbins - 1))
self.spinbox.setSingleStep(self.width)
self.spinbox.editingFinished.connect(self.spinbox_changed)
self.layout.addWidget(self.name)
self.layout.addWidget(self.x)
self.layout.addWidget(self.y)
self.layout.addWidget(self.slider, stretch=1)
self.layout.addStretch(0)
self.layout.addWidget(self.spinbox)
self.layout.addWidget(self.units)
self.set_value(0)
if self.nbins < 2:
state = State.DISABLE
self.set_state(state)
def set_state(self, state):
self.state = state
if self.state == State.X:
self.x.setChecked(True)
self.y.setChecked(False)
self.slider.hide()
self.spinbox.hide()
self.units.hide()
elif self.state == State.Y:
self.x.setChecked(False)
self.y.setChecked(True)
self.slider.hide()
self.spinbox.hide()
self.units.hide()
elif self.state == State.NONE:
self.x.setChecked(False)
self.y.setChecked(False)
self.slider.show()
self.spinbox.show()
self.units.show()
else:
self.x.setChecked(False)
self.x.setDisabled(True)
self.y.setChecked(False)
self.y.setDisabled(True)
self.slider.hide()
self.spinbox.show()
self.spinbox.setDisabled(True)
self.units.show()
def get_state(self):
return self.state
def x_clicked(self):
old_state = self.state
self.set_state(State.X)
if self.state != old_state:
self.stateChanged.emit(self.number)
def y_clicked(self):
old_state = self.state
self.set_state(State.Y)
if self.state != old_state:
self.stateChanged.emit(self.number)
def spinbox_changed(self):
self.value = self.spinbox.value()
self.update_slider()
def slider_changed(self):
self.value = self.get_bin_center(self.slider.value())
self.update_spinbox()
self.valueChanged.emit()
def get_bin_center(self, n):
return (n + 0.5) * self.width + self.minimum
def update_slider(self):
i = (self.value - self.minimum) / self.width
self.slider.setValue(int(min(max(i, 0), self.nbins - 1)))
def update_spinbox(self):
self.spinbox.setValue(self.value)
def set_value(self, value):
self.value = value
self.update_slider()
self.update_spinbox()
def get_value(self):
return self.value
class DimensionNonIntegrated(Dimension):
binningChanged = Signal()
"""
A dimension that can either be sliced through or rebinned. It
has additional properties for either number_of_bins or thickness
from mantidqt.widgets.sliceviewer.dimensionwidget import DimensionMDE
from qtpy.QtWidgets import QApplication
app = QApplication([])
window = DimensionNonIntegrated({'minimum':-1.1, 'number_of_bins':11,
'width':0.2, 'name':'Dim0', 'units':'A'})
window.show()
app.exec_()
"""
def __init__(self, dim_info, number=0, state=State.NONE, parent=None):
# hack in a number_of_bins for MDEventWorkspace
if dim_info['type'] == 'MDE':
dim_info['number_of_bins'] = 100
dim_info['width'] = (dim_info['maximum'] -
dim_info['minimum']) / 100
self.spinBins = QSpinBox()
self.spinBins.setRange(2, 9999)
self.spinBins.setValue(dim_info['number_of_bins'])
self.spinBins.hide()
self.spinBins.setMinimumWidth(110)
self.spinThick = QDoubleSpinBox()
self.spinThick.setRange(0.001, 999)
self.spinThick.setValue(0.1)
self.spinThick.setSingleStep(0.1)
self.spinThick.setDecimals(3)
self.spinThick.setMinimumWidth(110)
self.rebinLabel = QLabel("thick")
self.rebinLabel.setMinimumWidth(44)
super().__init__(dim_info, number, state, parent)
self.spinBins.valueChanged.connect(self.binningChanged)
self.spinThick.valueChanged.connect(self.valueChanged)
self.layout.addWidget(self.spinBins)
self.layout.addWidget(self.spinThick)
self.layout.addWidget(self.rebinLabel)
def get_bins(self):
return int(self.spinBins.value())
def get_thickness(self):
return float(self.spinThick.value())
def set_state(self, state):
super().set_state(state)
if self.state == State.X:
self.spinBins.show()
self.spinThick.hide()
self.rebinLabel.setText('bins')
elif self.state == State.Y:
self.spinBins.show()
self.spinThick.hide()
self.rebinLabel.setText('bins')
elif self.state == State.NONE:
self.spinBins.hide()
self.spinThick.show()
self.rebinLabel.setText('thick')
else:
self.spinBins.hide()
self.spinThick.hide()
self.rebinLabel.hide()
def set_value(self, value):
"""Override the set_value for MDE, this allows the exact value to be
set instead of limiting to the value of the slider. This
allows when selecting a peak to go to the exact layer where
the peak is.
"""
self.value = value
# temporary disable updating value from slider change
self.update_value_from_slider = False
self.update_slider()
self.update_value_from_slider = True
self.update_spinbox()
class DimensionMDE(Dimension):
binningChanged = Signal()
"""
MDEventWorkspace has additional properties for either number_of_bins or thickness
from mantidqt.widgets.sliceviewer.dimensionwidget import DimensionMDE
from qtpy.QtWidgets import QApplication
app = QApplication([])
window = DimensionMDE({'minimum':-1.1, 'number_of_bins':11, 'width':0.2, 'name':'Dim0', 'units':'A'})
window.show()
app.exec_()
"""
def __init__(self, dim_info, number=0, state=State.NONE, parent=None):
# hack in a number_of_bins for MDEventWorkspace
dim_info['number_of_bins'] = 1000
dim_info['width'] = (dim_info['maximum']-dim_info['minimum'])/1000
self.spinBins = QSpinBox()
self.spinBins.setRange(2,9999)
self.spinBins.setValue(100)
self.spinBins.hide()
self.spinBins.setMinimumWidth(110)
self.spinThick = QDoubleSpinBox()
self.spinThick.setRange(0.001,999)
self.spinThick.setValue(0.1)
self.spinThick.setSingleStep(0.1)
self.spinThick.setDecimals(3)
self.spinThick.setMinimumWidth(110)
self.rebinLabel = QLabel("thick")
self.rebinLabel.setMinimumWidth(44)
super(DimensionMDE, self).__init__(dim_info, number, state, parent)
self.spinBins.valueChanged.connect(self.binningChanged)
self.spinThick.valueChanged.connect(self.valueChanged)
self.layout.addWidget(self.spinBins)
self.layout.addWidget(self.spinThick)
self.layout.addWidget(self.rebinLabel)
def get_bins(self):
return int(self.spinBins.value())
def get_thickness(self):
return float(self.spinThick.value())
def set_state(self, state):
super(DimensionMDE, self).set_state(state)
if self.state == State.X:
self.spinBins.show()
self.spinThick.hide()
self.rebinLabel.setText('bins')
elif self.state == State.Y:
self.spinBins.show()
self.spinThick.hide()
self.rebinLabel.setText('bins')
elif self.state == State.NONE:
self.spinBins.hide()
self.spinThick.show()
self.rebinLabel.setText('thick')
else:
self.spinBins.hide()
self.spinThick.hide()
self.rebinLabel.hide()
class Dimension(QWidget):
stateChanged = Signal(int)
valueChanged = Signal()
"""
pass in dimension
state: one of (State.X, State.Y, State.NONE, State.DISBALE)
Can be run independently by:
from mantidqt.widgets.sliceviewer.dimensionwidget import Dimension
from qtpy.QtWidgets import QApplication
app = QApplication([])
window = Dimension({'minimum':-1.1, 'number_of_bins':11, 'width':0.2, 'name':'Dim0', 'units':'A'})
window.show()
app.exec_()
"""
def __init__(self, dim_info, number=0, state=State.NONE, parent=None):
super(Dimension, self).__init__(parent)
self.minimum = dim_info['minimum']
self.nbins = dim_info['number_of_bins']
self.width = dim_info['width']
self.number = number
self.layout = QHBoxLayout(self)
self.name = QLabel(dim_info['name'])
self.units = QLabel(dim_info['units'])
self.x = QPushButton('X')
self.x.setFixedSize(32,32)
self.x.setCheckable(True)
self.x.clicked.connect(self.x_clicked)
self.y = QPushButton('Y')
self.y.setFixedSize(32,32)
self.y.setCheckable(True)
self.y.clicked.connect(self.y_clicked)
self.slider = QSlider(Qt.Horizontal)
self.slider.setRange(0, self.nbins-1)
self.slider.valueChanged.connect(self.slider_changed)
self.spinbox = QDoubleSpinBox()
self.spinbox.setDecimals(3)
self.spinbox.setRange(self.get_bin_center(0), self.get_bin_center(self.nbins-1))
self.spinbox.setSingleStep(self.width)
self.spinbox.valueChanged.connect(self.spinbox_changed)
self.layout.addWidget(self.name)
self.layout.addWidget(self.x)
self.layout.addWidget(self.y)
self.layout.addWidget(self.slider, stretch=1)
self.layout.addStretch(0)
self.layout.addWidget(self.spinbox)
self.layout.addWidget(self.units)
self.set_value(0)
if self.nbins < 2:
state = State.DISABLE
self.set_state(state)
def set_state(self, state):
self.state = state
if self.state == State.X:
self.x.setChecked(True)
self.y.setChecked(False)
self.slider.hide()
self.spinbox.hide()
self.units.hide()
elif self.state == State.Y:
self.x.setChecked(False)
self.y.setChecked(True)
self.slider.hide()
self.spinbox.hide()
self.units.hide()
elif self.state == State.NONE:
self.x.setChecked(False)
self.y.setChecked(False)
self.slider.show()
self.spinbox.show()
self.units.show()
else:
self.x.setChecked(False)
self.x.setDisabled(True)
self.y.setChecked(False)
self.y.setDisabled(True)
self.slider.hide()
self.spinbox.show()
self.spinbox.setDisabled(True)
self.units.show()
def get_state(self):
return self.state
def x_clicked(self):
old_state = self.state
self.set_state(State.X)
if self.state != old_state:
self.stateChanged.emit(self.number)
def y_clicked(self):
old_state = self.state
self.set_state(State.Y)
if self.state != old_state:
self.stateChanged.emit(self.number)
def spinbox_changed(self):
self.value = self.spinbox.value()
self.update_slider()
self.valueChanged.emit()
def slider_changed(self):
self.value = self.get_bin_center(self.slider.value())
self.update_spinbox()
self.valueChanged.emit()
def get_bin_center(self, n):
return (n+0.5)*self.width+self.minimum
def update_slider(self):
i = (self.value-self.minimum)/self.width
self.slider.setValue(int(min(max(i, 0), self.nbins-1)))
def update_spinbox(self):
self.spinbox.setValue(self.value)
def set_value(self, value):
self.value = value
self.update_slider()
self.update_spinbox()
def get_value(self):
return self.value
